Commit Graph

49408 Commits

Author SHA1 Message Date
Yousong Zhou
2407118db9 netfilter.mk: add version conditional around CONFIG_NF_NAT_PROTO_GRE
It was removed in upstream linux commit faec18db ("netfilter: nat:
remove l4proto->manip_pkt").  This happened since linux 5.0

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Tony Ambardar
32931f18f2 netfilter.mk: add version conditional for CONFIG_NF_CT_PROTO_GRE
Kernel commit 22fc4c4c9fd6 ("netfilter: conntrack: gre: switch module to
be built-in") moved the CT GRE code into the core nf_conntrack.ko module
and changed the CONFIG_NF_CT_PROTO_GRE option to boolean for kernel 5.1
and onwards.

CONFIG_NF_CT_PROTO_GRE at the moment has no prompt and can only be
selected by NF_CONNTRACK_PPTP

Fixes: FS#2990 (partial)
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2990

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[note that the option now can not be enabled on its own]
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Yousong Zhou
4c21415350 generic: 5.4: make nf nat masquerade in unset state by default
Upstream linux 5.1 commit d1aca8ab ("netfilter: nat: merge ipv4 and ipv6
masquerade functionality") replaces the following 2 options

 - CONFIG_NF_NAT_MASQUERADE_IPV4
 - CONFIG_NF_NAT_MASQUERADE_IPV6

with CONFIG_NF_NAT_MASQUERADE.  The new option is one without prompt and
will be selected by CONFIG_NETFILTER_XT_TARGET_MASQUERADE introduced
still later in 5.2.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Yousong Zhou
a5c10ba980 netfilter.mk: add version conditional for nf_nat_ipv4,6
The upstream linux commit is 3bf195ae ("netfilter: nat: merge
nf_nat_ipv4,6 into nat core").  It was included since linux 5.1

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Yousong Zhou
c6bdd7321f netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_REDIRECT
CONFIG_IP_NF_TARGET_REDIRECT is a compat option since upstream commit
2cbc78a2 ("netfilter: combine ipt_REDIRECT and ip6t_REDIRECT").  That
happened since linux 3.10

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Yousong Zhou
d1592306cc netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_MASQUERADE
CONFIG_IP_NF_TARGET_MASQUERADE and its counterpart
CONFIG_IP6_NF_TARGET_MASQUERADE are "backwards-compat option for the
user's convenience"

Related commit d22c1755 ("netfilter: fix NAT packaging with kernels
5.2+")

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 22:28:37 +08:00
Yousong Zhou
d23443f4d9 netifd: bump to version 2020-10-22
Changelog follows

  ced0d535 build: find and use libnl header dirs
  5722218e proto: rework parse_addr to return struct device_addr
  3d7bf604 device_addr: record address index as in the blob
  24ce1eab interface: proto_ip: order by address index first

This bump mainly affects order of interface addresses in ubus output.  At the
moment dnsmasq uses first address of an interface for setting dhcp-range option
in its config

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-10-24 18:35:27 +08:00
Daniel Golle
0b31713c85 rpcd: adapt defaults for changed ubus.sock path
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-22 15:13:38 +01:00
Daniel Golle
061904d7e3 uhttpd: adapt defaults for changes ubus.sock path
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-22 15:13:38 +01:00
Daniel Golle
de7ca7dafa base-files: merge /etc/passwd et al at sysupgrade config restore
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-22 14:25:55 +01:00
Petr Štetiar
2812ea3acb Revert "target: select procd-{ujail,seccomp} if !SMALL_FLASH"
This reverts commit 6a56a6eb30 as several
users have reported unbootable systems.

Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2020-October/031838.html
Suggested-by: Roman Kuzmitskii <damex.pp@icloud.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-10-22 11:51:38 +02:00
Daniel Golle
6a56a6eb30 target: select procd-{ujail,seccomp} if !SMALL_FLASH
Add procd-ujail and procd-seccomp to DEFAULT_PACKAGES if not building
for space-constraint (FEATURES:=small_flash) targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-21 15:26:43 +01:00
Daniel Golle
a2def3663a procd: jail: clean up capability handling and non-root ubusd
Unify capability handling to only use OCI spec parsers even for ujail
slim containers which previously supposedly used their own format.

 80c9516 cgroups: restrict allowed keys in 'unified' section
 5ade567 cgroups: memory controller fixes
 3121467 early: run ubusd non-root as user ubus, group ubus
 12a5b97 jail: adapt to new ubus socket path
 788d144 instance: actually wire up capabilities filename
 ebc5a7f jail: nuke old capabilities code in favour of reusing OCI code
 6c5233a jail: capabilities: apply in two phases

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-21 15:22:30 +01:00
Daniel Golle
2dffadece9 ubus: prepare to run ubusd as non-root user
Move /var/run/ubus.sock to /var/run/ubus/ubus.sock in preparation for
having ubusd run as non-root user.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-21 15:20:10 +01:00
Daniel Golle
d355b578b7 target: include selinux-variants if CONFIG_SELINUX is set
Rather than unconditionally adding busybox and procd to the set of
default packages, add busybox-selinux and procd-selinux in case
CONFIG_SELINUX is set.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-21 11:56:26 +01:00
Markov Mikhail
610843f3bc mac80211: rt2x00: save survey for every channel visited
rt2800 olny gives you survey for current channel.

Survey-based ACS algorithms are failing to perform their job when working
with rt2800.

Make rt2800 save survey for every channel visited and be able to give away
that information.

There is a bug registred https://dev.archive.openwrt.org/ticket/19081 and
this patch solves the issue.

Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
2020-10-21 11:56:26 +01:00
Hans Dedecker
b90a4a8e08 glibc: update to latest 2.31 commit
4bc9918c99 AArch64: Use __memcpy_simd on Neoverse N2/V1
4722d1fb9d [AArch64] Improve integer memcpy
bea507a3f5 AArch64: Rename IS_ARES to IS_NEOVERSE_N1
d0a5b76902 AArch64: Improve backwards memmove performance
24a30c5959 AArch64: Add optimized Q-register memcpy
88db98fa6e AArch64: Align ENTRY to a cacheline

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2020-10-20 21:46:20 +02:00
John Audia
dd20ba98e7 kernel: bump 5.4 to 5.4.72
All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2020-10-20 03:01:27 +02:00
Richard Fröhning
33b76d66d1 ramips: add support for TP-Link RE200 v4
TP-Link RE200 v4 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas.
It's based on MediaTek MT7628AN+MT7610EN like the v2/v3.

Specifications
--------------

- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- 8x LED (GPIO-controlled), 2x button
- UART connection holes on PCB (57600 8n1)

There are 2.4G and 5G LEDs in red and green which are controlled
separately.

MAC addresses
-------------

The MAC address assignment matches stock firmware, i.e.:

LAN : *:8E
2.4G: *:8D
5G  : *:8C

MAC address assignment has been done according to the RE200 v2.

The label MAC address matches the OpenWrt ethernet address.

Installation
------------

Web Interface
-------------

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Recovery
--------

Unfortunately, this devices does not offer a recovery mode or a tftp
installation method. If the web interface upgrade fails, you have to open
your device and attach serial console.

Instructions for serial console and recovery may be checked out in
commit 6d6f36ae78 ("ramips: add support for TP-Link RE200 v2") or on
the device's Wiki page.

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>
[removed empty line, fix commit message formatting]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-10-20 03:01:13 +02:00
Adrian Schmutzler
21cf17bb4c lantiq: remove support for kernel 4.19
The target uses 5.4 as default kernel since 06/2020.

Kernel 4.19 support is not really maintained anymore, it does not
seem to be needed and upcoming changes (mainly DSA) will break
backward-compatibility anyway.

Thus, make maintaining of old stuff and reviewing of new stuff
easier by removing support for kernel 4.19.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-19 15:57:40 +02:00
Ansuel Smith
f47cb405ca ipq806x: fix pci broken on bootm command
Pci is broken when bootm is used instead of the custom bootipq. This
is caused by the lack of reset by the bootloader. Make the driver do
the reset to fix this specific problem.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2020-10-19 15:46:17 +02:00
Adrian Schmutzler
29ca10e537 ipq806x: remove support for kernel 4.19
The target uses 5.4 as default kernel since 04/2020.

Kernel 4.19 support is not really maintained anymore, and there has
been a lot of changes between 4.19 and 5.4 on this target. Despite,
new devices are typically added for 5.4 only anyway.

Thus, make maintaining of old stuff and reviewing of new stuff
easier by removing support for kernel 4.19.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-19 15:37:54 +02:00
Adrian Schmutzler
a7afeb3142 ipq40xx: remove support for kernel 4.19
The target uses 5.4 as default kernel since 03/2020.

Kernel 4.19 support is not really maintained anymore, it does not
seem to be needed, and removing it will make upcoming driver
updates easier. Thus, remove it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-19 15:30:44 +02:00
John Crispin
c78e123d5a rtl838x: various fixes
* add d-link_dgs-1210-10p support
* make sure mips16 is disabled
* add a generic sub target
* add proper cflags

Signed-off-by: John Crispin <john@phrozen.org>
2020-10-19 14:53:27 +02:00
Hauke Mehrtens
7f5f738466 sunxi: Adapt U-Boot config to board rename
The board was renamed without changing the BUILD_DEVICES in the U-Boot
Makefile, this broken the build.

Fixes: 0830ae3a2f ("sunxi: Correct manufacturer name to Sinovoip")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-18 15:46:42 +02:00
Jayantajit Gogoi
e6d9f6fdff sunxi: add support for FriendlyARM NanoPi R1
Specification:

- CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
- DDR3 RAM: 512MB/1GB
- Network:
    10/100/1000M Ethernet x 1,
    10/100M Ethernet x 1
- WiFi: 802.11b/g/n, with SMA antenna interface
- USB Host: Type-A x2
- MicroSD Slot x 1
- MicroUSB: for OTG and power input
- Debug Serial Port: 3Pin 2.54mm pitch pin-header
- LED:
    nanopi:red:status
    nanopi:green:wan
    nanopi:green:lan
- KEY:
    reset
- Power Supply: DC 5V/2A

Installation:

- Write the image to SD Card with dd
- Boot NanoPi from the SD Card

Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2020-10-18 15:46:42 +02:00
张鹏
4ff7bdfeeb ath79: add support for Qxwlan E1700AC v2
E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880.

Specification:

 - 750/400/250 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 3T3R 2.4 GHz
 - 3T3R 5 GHz
 - 2 x 10/1000M Mbps Ethernet (RJ45)
 - 1 x MiniPCI-e
 - 1 x SIM (3G/4G)
 - 1 x USB 2.0 Port
 - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input
 - UART (J5) header on PCB (115200 8N1)

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig, whitespace fixes]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-17 20:18:00 +02:00
张鹏
987d9028e1 ath79: add support for Qxwlan E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.

Specification:

 - 720/600/200 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4 GHz (QCA9558)
 - 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
 - 4x miniPCIe slot (USB 2.0 bus only)
 - 1x microSIM slot
 - 5x LED (4 driven by GPIO)
 - 1x button (reset)
 - 1x 3-pos switch
 - 1x DC jack for main power input (9-48 V)
 - UART (JP5) and LEDs (J8) headers on PCB

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig, whitespace adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-17 20:17:59 +02:00
张鹏
27a7d071c0 ath79: add support for Qxwlan E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334.

Specification:

 - 560/450/225 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4G GHz (AR9344)
 - 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
 - 7x LED (6 driven by GPIO)
 - 1x button (reset)
 - 1x DC jack for main power input (9-48 V)
 - UART (J23) and LEDs (J2) headers on PCB

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-17 20:17:59 +02:00
Felix Fietkau
4a0688ed71 base-files: remove block2mtd checks from sysupgrade
This hasn't been used in a long time

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-17 16:43:17 +02:00
Felix Fietkau
93f98b2835 kernel: remove obsolete non-upstream block2mtd patches
Since block2mtd is not used for firmware images anymore, these patches
are no longer needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-17 16:43:17 +02:00
Felix Fietkau
08a42ef057 mac80211: fix memory leak on filtered powersave frames
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged
packets for stations in powersave mode.
To fix this, move the code handling those packets from __ieee80211_tx_status
into ieee80211_tx_status_ext

Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-17 16:43:17 +02:00
Adrian Schmutzler
e17529a3e3 Revert "build: process variable exports from toplevel.mk only once"
This reverts commit ef7c34c1d1.

The commit seems to break all buildbots with messages like:

/builder/shared-workdir/build/include/toplevel.mk:15:
  /builder/shared-workdir/build/include/toplevel-vars.mk: No such file or directory

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-16 22:58:44 +02:00
Felix Fietkau
14bad2001f build: prevent excessive re-evaluation of PKG_VERSION
version_abbrev uses $(shell) and the ?= is causing make to run the command
over and over again, causing a significant build slowdown

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-16 21:39:10 +02:00
Felix Fietkau
ef7c34c1d1 build: process variable exports from toplevel.mk only once
These run a lot of expensive shell calls, so redundant calls should be
avoided

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-16 21:39:09 +02:00
Felix Fietkau
b59d5c8f0e mediatek: rewrite flow offload code
The code is now much cleaner and works better than the old code.
Preparation for submitting it upstream (though with a different API)
Also add back MT7621 support and fix flow table coherence issues on
MT7622

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-16 21:37:39 +02:00
Daniel Golle
ba9b6702aa config: clean up SELinux options
In order to make it easier for users to build with SELinux, have a
single option in 'Global build settings' to enable all necessary
kernel features, userland packages and build-system hooks.
Also add better descriptions and help messages while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-16 14:29:48 +01:00
Daniel Golle
00c28c51fb
selinux-policy: update to git tag v0.3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-16 13:49:38 +01:00
Daniel Golle
21a7c4d97a fstools: update to git HEAD
8e0f29a mount: remove support for legacy overlayfs before v2.3
 0f8a443 mount: fix log format string and indentation
 46a56d3 overlay: use precompiler macros for reoccuring path names
 f25ab8a mount: apply SELinux labels before overlayfs mount

Total ipk size change (ipq40xx): +120b

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-16 01:53:00 +01:00
Daniel Golle
1923669413 policycoreutils: 'restorecon' is a 'setfiles' applet
Instead of duplicating the '/sbin/setfiles' binary, have
'/sbin/restorecon' as yet another alias for
'/sbin/policycoreutils-setfiles'.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-16 00:38:06 +01:00
Daniel Golle
63e2e086be hostapd: ubus: add handler for wps_status and guard WPS calls
Expose WPS ubus API only if compiled with WPS support and add new
handler for wps_status call.
Also add '-v wps' option to check whether WPS support is present in
hostapd.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-16 00:38:06 +01:00
Peng Zhang
5666ca913a ath79: add support for Qxwlan E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.

Specification:

 - 560/450/225 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 5G GHz (AR9344)
 - 2x 10/100 Mbps Ethernet (one port with PoE support)
 - 1x miniPCIe slot (USB 2.0 bus only)
 - 7x LED (6 driven by GPIO)
 - 1x button (reset)
 - 1x DC jack for main power input (9-48 V)
 - UART (J23) and LEDs (J2) headers on PCB

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[cut out of bigger patch, alter use of DEVICE_VARIANT, merge case
in 01_leds, use lower case for v4]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 18:52:39 +02:00
Adrian Schmutzler
dec4a028ab rtl838x: remove model name from LED labels
Like in the previous patches for various targets, this removes
the "devicename" from LED labels in rtl838x, as it's useless and
only creates complexity.

Since the target is fresh and so far only system LEDs were added,
this does not add a migration script.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:54:31 +02:00
Adrian Schmutzler
a49c1aa883 rtl838x: move dts-v1 to DTSI
The syntax of the shared SoC DTSI file determines the DTS version,
so no need to repeat the "/dts-v1/;" identifier in every file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:51:42 +02:00
Adrian Schmutzler
3679f8f933 sunxi: use wpad-basic-wolfssl for Sinovoip Banana Pi M2 Ultra
The idea of commit a14f5bb4bd was to use wpad-basic-wolfssl
consistently throughout the whole trunk, so use it here as well.

Fixes: 50fdddae05 ("BPi-M2U kernel modules for onboard WiFi")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:46:54 +02:00
John Audia
0efec6a008 kernel: bump 5.4 to 5.4.71
All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL
Run-tested:   ipq806x/R7800, lantiq/Easybox 904 xDSL

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[add lantiq test reports]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-15 17:46:54 +02:00
John Crispin
479d1154c4 rtl838x: add DLink DGS-1210-16 support
Signed-off-by: John Crispin <john@phrozen.org>
2020-10-15 13:36:10 +02:00
Birger Koblitz
076fdd9fec rtl838x: Fix firmware handling
Fix wrong magic number verification for FW files.
Correct handling of external RTL8218B firmware PHY name in firmware.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2020-10-15 13:26:57 +02:00
Felix Fietkau
953435795d build: always build package/kernel/linux
build: always build package/kernel/linux

If no in-tree module packages are selected, the build system does not process
package/kernel/linux. This package is required for building the virtual
'kernel' package, which is specified as a dependency for all kernel packages.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-10-15 13:25:58 +02:00
Andreas Oberritter
f422488337 rtl838x: do not default to the router DEVICE_TYPE
The router profile installs many packages unnecessary for
the operation of a typical ethernet switch. Instead of creating
an empty switch profile upfront, use the basic profile until
a set of common packages crystallizes.

Signed-off-by: Andreas Oberritter <obi@saftware.de>
2020-10-15 08:32:31 +02:00