Commit Graph

3685 Commits

Author SHA1 Message Date
David Bauer
f393581f66 hostapd: add owe_transition_ifname
Add the owe_transition_ifname config option to wifi-ifaces.

This allows to configure OWE transition VAPs without adding SSID / BSSID
to the uci conifg but instead autodiscovering these parameters from
other networks on the same PHY.

The following configuration creates a OWE transition mode network
constellation.

config wifi-iface 'open0'
	option device 'radio0'
	option ifname 'open0'
	option network 'lan'
	option mode 'ap'
	option ssid 'FreeNet'
	option encryption 'none'
	option owe_transition_ifname 'owe0'

config wifi-iface 'owe0'
	option device 'radio0'
	option ifname 'owe0'
	option network 'lan'
	option mode 'ap'
	option ssid 'owe_tm.FreeNet'
	option encryption 'owe'
	option hidden '1'
	option owe_transition_ifname 'open0'

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 574539ee2c)
2022-06-16 11:08:02 +02:00
Jan Hoffmann
9c0f94e955 ltq-vdsl-app: disconnect when service is stopped
Stop the connection when the control daemon is terminated. The code is
a modified version of the termination routine in version 4.23.1 of the
daemon (which doesn't support VR9 modems anymore).

This could also be implemented by calling the acos and acs commands via
dsl_cpe_pipe.sh in the init script. However, doing it in the daemon
itself has the advantage of also working if it is terminated in another
way (for example during sysupgrade).

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
(cherry picked from commit 1daaef31b3)
2022-06-07 21:36:58 +02:00
Jan Hoffmann
d0397abd9d ltq-vdsl-app: set MAC address for vectoring error reports
This tells the modem about the WAN MAC address, which is used as source
address for vectoring error reports that are generated by the firmware.

It needs to be set early, as the MEI driver only actually writes the
value to the modem when is in reset state (i.e. the firmware has been
loaded, but connection has not started yet).

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
(cherry picked from commit b35d33c8b8)
2022-06-07 21:36:58 +02:00
Daniel Golle
76b4b50bbe
netifd: update to git HEAD
2e1fcf4 netifd: fix hwmode for 60g band
 39ef9fe interface-ip: fix memory corruption bug when using jail network namespaces

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 7eb83b2015)
2022-06-05 11:37:57 +01:00
Felix Fietkau
2ca8bccb00
netifd: update to the latest version
4b4849cf5e5a interface-ip: unify host and proto route handling
507c0513d176 interface-ip: add support for excluding interfaces in host route lookup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 24cc341fdc)
2022-06-05 11:37:47 +01:00
Daniel Golle
002e05bf9f
uqmi: update to git HEAD
56cb2d4 nas: add decoding of cell_id
 9a9019a uqmi: wms - added storage to read text messages

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 51c442c265)
2022-06-05 11:35:37 +01:00
Jo-Philipp Wich
dbd4c345fb firewall4: update to latest Git HEAD
210991d fw4: prefer /dev/stdin if available
4e5e322 fw4: make `fw4 restart` behavior more robust
221040e ruleset: emit time ranges when both start and stop times are specified
30a7d47 fw4: fix datetime parsing
fb9a6b2 ruleset: correct mangle_output chain type
6dd2617 fw4: fix logic flaw in testing hw flow offloading support
c7c9c84 fw4: ensure that negative bitcounts are properly translated
c4a78ed fw4: fix typo in emitted set types

Fixes: #9764, #9923, #9927, #9935, #9955
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a7ddef6ef1)
2022-06-01 13:51:19 +02:00
Jo-Philipp Wich
80baa60259 firewall4: update to latest Git HEAD
c22eeef fw4: support negative CIDR bit notation
628d791 hotplug: reliably handle interfaces with ubus zone hints
d005293 fw4: store zone associations from ubus in statefile as well
b268225 fw4: filter non hw-offload capable devices when resolving lower devices
57984e0 fw4: always resolve lower flowtable devices
7782017 tests: fix mocked `fd.read("line")` api
72b196d config: remove restictions on DHCPv6 allow rule
f0cc317 fw4: refactor family selection for forwarding rules
b0b8122 treewide: use modern syntax
05995f1 fw4: fix emitting device jump rules for family restricted zones
b479815 fw4: fix family auto-selection for config nat rules
2816a82 ruleset: ensure that family-agnostic ICMP rules cover ICMPv6 as well
2379c3d tests: add test coverage for zone family selection logic

Fixes: #5066, #9611, #9765, #9854
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 2df17604a4)
2022-05-20 20:08:24 +02:00
Tiago Gaspar
5ff900e0ad firewall: config: remove restictions on DHCPv6 allow rule
Remove restrictions on source and destination addresses, which aren't
specified on RFC8415, and for some reason in openwrt are configured
to allow both link-local and ULA addresses.
As cleared out in issue #5066 there are some ISPs that use Gloabal
Unicast addresses, so fix this rule to allow them.

Fixes: #5066

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
[rebase onto firewall3, clarify subject, bump PKG_RELEASE]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 65258f5d60)
2022-05-04 15:28:41 +02:00
Daniel Golle
946f60aaeb dnsmasq: add logfacility file to jail mounts
If logfacility is a path to a file it needs to be r/w mounted in the
sandbox as well for dnsmasq to work.

Reported-by: @iointerrupt
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 2b5fa44f60)
2022-05-01 13:23:12 +02:00
David Bauer
832e3ad71a iwinfo: update to latest HEAD
dc6847e iwinfo: nl80211: omit A-hwmode on non-5GHz hardware

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f757a8a098)
2022-04-27 00:55:07 +02:00
Jo-Philipp Wich
0481a5a35a firewall4: update to latest Git HEAD
fc83d46 ruleset: set auto-merge directive for interval sets
9bce873 fw4: fix skipping invalid ipset entries
425ea8a fw4: fix applying zone flags for source bound rules
a378883 fw4: fix emitting family specific redirect rules without any addrs
11feddf fw4: bracketize IPv6 addresses in dnat addr:port notation
9972f7d fw4: ensure to capitalize weekday names
fde8070 treewide: forward compatibility changes

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from commits 1a35ac9990 and
 af02a12d7c)
2022-04-25 09:55:23 +02:00
David Bauer
dbe8d4fa2e iwinfo: update to latest HEAD
a479b9b devices: remove whitespace
562d015 iwinfo: nl80211: fix hwmode parsing for multi-band NICs

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-24 23:13:04 +02:00
Cezary Jackiewicz
0a5f3b0126 comgt: support ZTE MF286R modem
The modem is based on Marvell PXA1826 and uses ACM+RNDIS interface to
establish connection with custom commands specific to ZTE modems.
Two variants of modems were discovered, some identifying themselves
as "ZTE", and others as plain "Marvell", the chipset manufacturer.
The modem itself runs a fork of OpenWrt inside, which root shell can be
accessed via ADB interface.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit e02fb42c53)
2022-04-17 21:31:02 +02:00
Lech Perczak
83003b6c06 comgt: ncm: try to detect interface for ttyACM ports
Some modems expose ttyACM as their control ports, which have the
"device" symlink pointing one level down in sysfs tree. Try to find
network interfaces for them as well, this is commonly used for modems
exposing ACM + RNDIS or ACM + ECM interface combinations.

Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit ed7957810c)
2022-04-17 21:31:02 +02:00
Lech Perczak
839cb17e3a comgt: ncm: select first available network interface for device
Some modems expose multiple network interfaces on the same USB device,
causing the connection setup script to fail, because glob matching in
the detection phase causes 'ls' to output more than one interface name
plus their base directories in sysfs. Avoid that by listing the
directories explicitly and then selecting first available interface.
This is the case for some variants of ZTE MF286R built-in modem, which
exposes both RNDIS and CDC-ECM network interfaces, causing the
connection setup to fail.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit b2940bb8b2)
2022-04-17 21:31:02 +02:00
Lech Perczak
c138cb80e9 comgt: ncm: allow specification of interface name
Add ifname property to UCI, which can be used to override the
autodetected interface name in case the detection fails due to having
none or more than one interface exposed by the modem, which is not
explicitly linked to TTY port. This is needed on certain variants of ZTE
MF286R built-in modem, which exposes both RNDIS and CDC-ECM interfaces
on the modem, on which the automatic detection may select the wrong
network interface.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit a67629bbe2)
2022-04-17 21:31:02 +02:00
David Bauer
75b83e94a3 hostapd: add ubus link-measurements notifications
Notify external ubus subscribers of received link-measurement reports.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f6445cfa1a)
2022-04-17 01:16:58 +02:00
David Bauer
fd20720c71 hostapd: add ubus method for requesting link measurements
Add a ubus method to request link-measurements from connected STAs.

In addition to the STAs address, the used and maximum transmit power can
be provided by the external process for the link-measurement. If they
are not provided, 0 is used as the default value.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 965aa33a18)
2022-04-17 01:16:44 +02:00
David Bauer
04bc07ab84 hostapd: add support for enabling link measurements
Allow external processes to enable advertisement of link-measurement RRM
capability.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 2ca5c3da04)
2022-04-17 01:16:37 +02:00
Daniel Golle
7ea412ef5a
netifd: relax check in dhcp proto handler
Checking whether /sbin/udhcpc is a symbolic link breaks using the
DHCP proto handler inside procd-ujail where bind-mounts are used for
the resolved link. Check whether /sbin/udhcpc is executable instead
to allow using the proto handler for DHCP-provisioned containers.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit c5f113c43f)
2022-04-15 14:12:09 +01:00
Eneas U de Queiroz
fb597a9d4c nftables: add CONFLICT between versions
Have nftables-json conflict with nftables-nojson.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 1135b75d1f)
2022-04-11 22:45:16 +02:00
Konstantin Demin
d118e57b35 dropbear: bump to 2022.82
- update dropbear to latest stable 2022.82;
  for the changes see https://matt.ucc.asn.au/dropbear/CHANGES
- use $(AUTORELEASE) in PKG_RELEASE
- use https for all uris
- refresh all patches
- rewrite patches:
  - 100-pubkey_path.patch
  - 130-ssh_ignore_x_args.patch

binary/pkg size changes:
- ath79/generic, mips:
  - binary: 215112 -> 219228 (+4116)
  - pkg: 111914 -> 113404 (+1490)
- ath79/tiny, mips:
  - binary: 172501 -> 172485 (-16)
  - pkg: 89871 -> 90904 (+1033)

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit 65256aee23)
2022-04-10 16:26:01 +01:00
Valentyn Datsko
660923cd74 dnsmasq: add procd interface index tracking
Problem exist when dnsmasq is exclusively bind to particular interface.
After reconfiguring or restarting this interface, its index changes, but
dnsmasq uses the old one. When this problem occurs, dnsmasq does not
listen on the correct interface so DHCP does not work, and clients do not
get an IP address. Procd netdev param can be added to restart dnsmasq when
the interface index is changed.

Signed-off-by: Valentyn Datsko <valikk.d@gmail.com>
[combined into a single &&-connected statement]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 76f55e3c3f)
2022-04-10 16:26:01 +01:00
Daniel Golle
d7354297bb uqmi: fix acquiring PIN status
Evaluating the return value of 'json_load' didn't work in the
intended way resulting in PIN status no longer being read on modems
where --get-pin-status doesn't fail.
Fix this by trying --get-pin-status first and checking if pin1_status
field exists in JSON, and if it doesn't try again with
--uim-get-sim-state.

Fixes: #9501
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit ee7cb5e885)
2022-03-27 16:14:00 +01:00
Felix Fietkau
68b008756f qosify: update to the latest version
391a9fbd5ace dns: fix parsing vlan encapsulated protocol
6aeeddbc91ad interface: extend dns filters to cover vlan tagged traffic as well
1ab53d4ca601 bpf: return TC_ACT_UNSPEC to allow other filters to proceed
ca21e729af23 interface: switch to using clsact for filters
5d158f6b3c15 interface: run ingress bpf filter on main device ingress instead of ifb egress
bdfcb11847ce interface: fix duplicated dns filter line
b97405aa632a Revert "ubus: remove dnsmasq subscriber"
8fbaf39dbc95 interface: rework adding/removing filters, do not delete clsact
d7ba5804eae4 interface: replace open-coded ifb-dns string with QOSIFY_DNS_IFNAME
91cf440db9e2 loader: fix use of deprecated functions
57c7817f91c2 qosify: fix dscp values of ubus-added dns host entries

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit af434e0da2)
2022-03-22 10:29:18 +01:00
Etienne Champetier
30c15d06e8 iptables: bump PKG_RELEASE
Following {arp,eb}tables-nft addition, bump PKG_RELEASE

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Etienne Champetier
66bb6dde36 iptables: add {arp,eb}tables-nft
Add a patch to add some missing init_extensions{a,b}() calls
Package lib{arp,eb}t_*.so

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Etienne Champetier
c913be1da1 iptables: add xtables-nft package
This allows to install ip6tables-nft without iptables-nft
This prepare the addition of {arp,eb}tables-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Etienne Champetier
afb6824a2c iptables: add xtables-legacy package
This allows to install ip6tables-legacy without iptables-legacy

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Etienne Champetier
905b49920f ebtables: rename to ebtables-legacy
This prepare the introduction of ebtables-nft.
Add PROVIDES so dependencies are not broken,
use ALTERNATIVES.

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Etienne Champetier
2f5088ef5f arptables: rename package to arptables-legacy
This prepare the introduction of arptables-nft.
Add PROVIDES so dependencies are not broken,
use ALTERNATIVES.

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-19 16:13:58 +01:00
Josef Schlehofer
013b043564 iwinfo: update to latest Git head
Changelog:
90bfbb9 devices: Add Cypress CYW43455
234075b devices: fix AMD RZ608 format
0e2a318 devices: add AMD RZ608 device-id

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-03-19 16:13:58 +01:00
Felix Fietkau
54aab4e719 bpftools: fix library path on 64 bit systems
drop the use of LIB_SUFFIX

Fixes: 00cbf6f6ab ("bpftools: update to standalone bpftools + libbpf, use the latest version")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-19 13:29:15 +01:00
Felix Fietkau
00cbf6f6ab bpftools: update to standalone bpftools + libbpf, use the latest version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-19 07:30:06 +01:00
Etienne Champetier
e9c99e0f7f iptables: backport missing init_extensions6() calls
This fixes ip6tables-nft no being able to use built-in
extensions like icmp6.

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-03-13 19:24:13 +01:00
Florian Eckert
e5440ec871 ipset: add backport patch for IPv6 nftables ipset-translation
When porting mwan3 from iptables to nftables I tried the new translation
tool for ipset ipset-translate. I noticed that no IPv6 ipset can be
created with the tool. I have reported the problem to the upstream
project and the following patch fixes the problem.

Until this upsream is included in a new release, this patch should be
used in Openwrt.

https://lore.kernel.org/netfilter-devel/20220228190217.2256371-1-pablo@netfilter.org/T/#m09cc3cb738f2e42024c7aecf5b7240d9f6bbc19c

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-03-13 19:24:13 +01:00
Daniel Golle
2a801ee562
uqmi: update to git HEAD
44dd095 uqmi: corrected too short received SMS

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-03-12 11:07:27 +00:00
Lech Perczak
c8a88118af uqmi: set CID during 'query-data-status' operation
Modems used in ZTE mobile broadband routers require to query the data
session status using the same CID as one used to establish the session,
otherwise they will report the session as "disconnected" despite
reporting correct PDH in previous step. Without this change, IPv6
connection on these modems doesn't establish properly. In IPv4 this bug
is present as well, but for some reason querying of IPv4 status works
using temporary CID, this however seems noncompliant with QMI
specifications, so fix it as well.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2022-03-12 10:38:11 +00:00
Yousong Zhou
289fbc5102 iptables: add iptables-mod-socket
Previously libxt_socket.so was included in iptables-mod-tproxy.  It was
missed out when trying to make kmod-ipt-socket and kmod-ipt-tproxy
separate packages

Fixes: 4f443c88 ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2022-03-10 10:43:32 +08:00
Josef Schlehofer
d71928c1e3 nftables: update to version 1.0.2
Changelog:
https://lwn.net/ml/netdev/YhO5Pn+6+dgAgSd9@salvia/

Patches:

removed:
- 001-parser-allow-quoted-string-in-flowtable_expr_member:
it is now part of upstream release [1]

added:
- 001-examples-compile-with-make-check.patch:
backported from [2], it fixes:

nft-json-file.c:3:10: fatal error: nftables/libnftables.h: No such file or directory
    3 | #include <nftables/libnftables.h>
      |          ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

[1] https://git.netfilter.org/nftables/commit/?h=v1.0.2&id=07af4429241c9832a613cb8620331ac54257d9df
[2] https://git.netfilter.org/nftables/commit/?id=18a08fb7f0443f8bde83393bd6f69e23a04246b3

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-03-07 21:44:53 +01:00
Felix Fietkau
759149977e qosify: update to the latest version
3276aed81c73 move run_cmd() to main.c
558eabc13c64 map: move dns host based lookup code to a separate function
6ff06d66c36c dns: add code for snooping dns packets
a78bd43c4a54 ubus: remove dnsmasq subscriber
9773ffa70f1f map: process dns patterns in the order in which they were defined
f13b67c9a786 dns: allow limiting dns entry matching to cname name

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-06 23:01:24 +01:00
Hauke Mehrtens
921392e216 iproute2: Remove libxtables from some tc variants
This adds the new tc-bpf variant and removes libxtables dependency from
the tc-tiny variant. The tc-full variant stays like before and contains
everything.

This allows to use tc without libxtables.

The variants have the following sizes:
root@OpenWrt:/# ls -al /usr/libexec/tc-*
-rwxr-xr-x    1 root     root        282453 Mar  1 21:55 /usr/libexec/tc-bpf
-rwxr-xr-x    1 root     root        282533 Mar  1 21:55 /usr/libexec/tc-full
-rwxr-xr-x    1 root     root        266037 Mar  1 21:55 /usr/libexec/tc-tiny

They are linking the following shared libraries:
root@OpenWrt:/# ldd /usr/libexec/tc-tiny
        /lib/ld-musl-mips-sf.so.1 (0x77d6e000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d4a000)
        libc.so => /lib/ld-musl-mips-sf.so.1 (0x77d6e000)
root@OpenWrt:/# ldd /usr/libexec/tc-bpf
        /lib/ld-musl-mips-sf.so.1 (0x77da6000)
        libbpf.so.0 => /usr/lib/libbpf.so.0 (0x77d60000)
        libelf.so.1 => /usr/lib/libelf.so.1 (0x77d3e000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d1a000)
        libc.so => /lib/ld-musl-mips-sf.so.1 (0x77da6000)
        libz.so.1 => /usr/lib/libz.so.1 (0x77cf6000)
root@OpenWrt:/# ldd /usr/libexec/tc-full
        /lib/ld-musl-mips-sf.so.1 (0x77de8000)
        libbpf.so.0 => /usr/lib/libbpf.so.0 (0x77da2000)
        libelf.so.1 => /usr/lib/libelf.so.1 (0x77d80000)
        libxtables.so.12 => /usr/lib/libxtables.so.12 (0x77d66000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d42000)
        libc.so => /lib/ld-musl-mips-sf.so.1 (0x77de8000)
        libz.so.1 => /usr/lib/libz.so.1 (0x77d1e000)

This is based on a patch from Tiago Gaspar.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-03-05 21:06:35 +01:00
Stijn Tintel
c2d7896a65 qosify: bump to git HEAD
interface: disable autorate-ingress by default

Also change the example config to reflect this.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-03-04 20:37:05 +02:00
Stijn Tintel
1848b25cdd qosify: add PKG_RELEASE
Without PKG_RELEASE, it's impossible to trigger package updates when
changing files included in the package that are not in the qosify git
repository.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
2022-03-04 20:25:05 +02:00
Florian Eckert
ba6a48366f ipset: update to 7.15
Update to the latest upstream version. In this version there is a new
tool with which you can convert ipsets into nftables sets. Since we are
now using nftables as default firewall, this could be a useful tool for
porting ipsets to nftables sets.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-03-01 21:17:30 +01:00
Paul Spooren
038d5bdab1 layerscape: use semantic versions for LSDK
PKG_VERSION should not contain the package name but the version only.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-03-01 00:01:18 +01:00
Etienne Champetier
d95b74f7c9 iptables: bump PKG_RELEASE
Following dependencies rework, bump PKG_RELEASE

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
39d50a2008 iptables: move libiptext* to their own packages
iptables-nft doesn't depend on libip{4,6}tc, so move
libiptext* libs in their own packages to clean up dependencies
Rename libxtables-nft to libiptext-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00
Etienne Champetier
795e7155cb iptables: rename to ip(6)tables-legacy, add PROVIDES
Using PROVIDES allows to have other packages continue to
depend on iptables and users to pick between legacy and nft
version.

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2022-02-28 21:52:01 +01:00