Commit Graph

45806 Commits

Author SHA1 Message Date
Felix Fietkau
ba5878f056 mt76: update to the latest version
8fc3e6e mt76: mt7615: fix using VHT STBC rates
b21b991 mt76: mt7615: fix PS buffering of action frames
3d43dd8 mt76: mt7615: fix invalid fallback rates
0ce4682 mt76: mt7603: fix invalid fallback rates
3b08966 Revert "mt76: usb: use full intermediate buffer in mt76u_copy"
48800e7 Revert "mt76: usb: remove unneeded {put,get}_unaligned"
439354d Revert "mt76: usb: fix endian in mt76u_copy"
8c1da93 mt76: usb: fix endian in mt76u_copy
307be50 mt76: usb: remove unneeded {put,get}_unaligned
5d29829 mt76: mt76x02: use params->ssn value directly
f74d117 mt76: mt7603: use params->ssn value directly
649f2e8 mt76: mt7615: use params->ssn value directly
b647180 mt76: mt7615: unlock dfs bands

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-07-12 16:12:01 +02:00
Hauke Mehrtens
e05310b9b8 mac80211: Do not build b43legacy on BRCM47xx mips74 subtarget
b43legacy needs ssb support and we do not compile the mips74 subtarget
of the brcm47xx target with SSB support. This causes a build failure in
the mac80211 package and only some of the kernel modules are being
created.

I am not aware of any device with a BRCM47xx mips74 CPU which uses a
b43legacy compatible device.

Fixes: FS#2334
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-12 01:15:50 +02:00
David Bauer
14e0e4f138 ramips: add support for ASUS RT-AC57U
SoC:   MediaTek MT7621AT
RAM:   128M (Winbond W631GG6KB-15)
FLASH: 16MB (Spansion S25FL128SA)
WiFi:  MediaTek MT7603EN bgn 2SS
WiFi:  MediaTek MT7612EN nac 2SS
BTN:   Reset - WPS
LED:    - Power
        - LAN {1-4}
        - WAN
        - WiFi 2.4 GHz
        - WiFi 5 GHz
        - USB
UART:  UART is present next to the Power LED.
       TX - RX - GND - 3V3 / 57600-8N1
       3V3 is the nearest one to the Power LED.

Installation
------------
Via TFTP:
1. Set your computers IP-Address to 192.168.1.75.
2. Power up the Router with the Reset button pressed.
3. Release the Reset button after 5 seconds.
4. Upload OpenWRT sysupgrade image via TFTP:
 > tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE>

Via SSH:
Note: User/password for SSH is identical with the one used in the
Web-interface.
1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt sysupgrade image via scp:
 > scp owrt.bin admin@192.168.1.1:/tmp
4. Connect via SSH to the router.
 > ssh admin@192.168.1.1
5. Write the OpenWrt image to flash.
 > mtd-write -i /tmp/owrt.bin -d linux
6. Reboot the router
 > reboot

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-07-11 21:32:39 +02:00
Colby Whitney
c52ca08d40 lua5.3: build shared library
Update the lua5.3 package to build a shared object just like the old lua
package. Ported / recreated the same patch number as the other lua
package. Built and tested library / interpreter on BCM5301X.

Signed-off-by: Colby Whitney <colby.whitney@luxul.com>
2019-07-11 18:38:51 +02:00
Chuanhong Guo
53daa51cf2 ramips: fix mqmaker witi case in fixup-mac-address
This commit fixes a forgotten case in previous commit.

Fixes: 087e14ab59 ("ramips: mt7621: merge two variants of MQmaker WiTi together")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-11 23:27:06 +08:00
Rafał Miłecki
f7edd94a65 base-files: move stage2 upgrade to separated file
do_upgrade_stage2() isn't really any common code. It isn't used anywhere
except for /sbin/sysupgrade that passes it to the stage2.

Moving its code to separated file also simplifies COMMAND variable.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-07-11 17:05:20 +02:00
Chuanhong Guo
087e14ab59 ramips: mt7621: merge two variants of MQmaker WiTi together
Since we can auto-detect memory now, we don't need 2 dts for two
memory variants.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-11 22:11:21 +08:00
Chuanhong Guo
a2c19f1d2f ramips: dts: drop memory nodes
mt7621 and mt7628 now have the ability to detect memory size
automatically.
Drop memory nodes and let kernel determine memory size.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-11 22:11:21 +08:00
Chuanhong Guo
6d91ddf517 ramips: mt7621: add support for memory detection
mt7621 has the following memory map:
0x0-0x1c000000: lower 448m memory
0x1c000000-0x2000000: peripheral registers
0x20000000-0x2400000: higher 64m memory

detect_memory_region in arch/mips/kernel/setup.c only add the first
memory region and isn't suitable for 512m memory detection because
it may accidentally read the memory area for peripheral registers.

This commit adds memory detection capability for mt7621:
1. add the highmem area when 512m is detected.
2. guard memcmp from accessing peripheral registers:
     This only happens when some weird user decided to change
     kernel load address to 256m or higher address. Since this
     is a quite unusual case, we just skip 512m testing and return
     256m as memory size.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-11 22:11:21 +08:00
Daniel Golle
98d04dc4cf ramips: fix bogus MTK_SOC (typo)
Belkin F7C027 is clearly Rt5350 SoC, as shown on internal
photographs filed for FCC approval[1].

[1]: https://fcc.io/K7S/F7C027

Fixes commit 3b0264eddb
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-10 19:28:35 +02:00
Adrian Schmutzler
447deed52a ramips: Sort all subtarget Makefiles
This patch applies sorting to the definitions as whole blocks.

Sorting has been performed fully automatic, line count differences
originate from double empty lines removed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
5d50155f14 ramips: Reapply sorting to board.d files
This patch is cosmetical:
It only applies sorting based on device names, whereas renames
already took place in earlier patches.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
b4588c8538 kernel/om-watchdog: Apply device renames from ramips
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
1096d1b697 uboot-envtools: Apply ramips device renames
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
e8d2d97498 ramips: Remove base-files/lib/ramips.sh
Having converted the target to use device compatible, ramips.sh
is obsolete now.

The only remaining entry for the mt7688 evaluation board seems to
be orphaned.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
3b0264eddb ramips/rt305x: Name DTS files based on scheme
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
6a104ac772 ramips/rt288x,rt3883: Name DTS files based on scheme
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
b97a99256f ramips/mt76x8: Name DTS files based on scheme
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
7196ca1d49 ramips/mt7621: Name DTS files based on scheme
As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
48047b3a5c ramips/mt7620: Name DTS files based on scheme
As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
402138d12d ramips: Derive DTS name from device name in Makefile
This will automatically derive the DTS name as in ath79 and thus
makes specifying DTS for every device obsolete.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

---

This patch only introduces the mechanism and is then followed by
commits with renames and Makefile adjustments per subtarget.

Eventually, those can be all squashed into a single commit or left
as they are to enhance overview.
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
7dd3a234be ramips/rt305x: Synchronize Makefiles with DTS compatible
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
83efa8329b ramips/rt288x,rt3883: Synchronize Makefiles with DTS compatible
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
c2334ad60d ramips/mt76x8: Synchronize Makefiles with DTS compatible
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
2f2a319f82 ramips/mt7621: Synchronize Makefiles with DTS compatible
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
9f99000165 ramips/mt7620: Synchronize Makefiles with DTS compatible
This will "rename" devices in Makefiles to the pattern used in
DTS compatible. This will systematize naming of devices
enormously.

As device names are used to for default SUPPORTED_DEVICES entries,
we need to adjust the source for /tmp/sysinfo/board_name, too.
So remove relevant entries from base-files/lib/ramips.sh and
use device compatible for that.

Despite that, base-files are updated, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:29 +02:00
Adrian Schmutzler
d93969a13a ramips: Improve compatible for TP-Link Archer devices
Include "Archer" in compatible as it is part of the device name.

Update Makefile device names where necessary to match compatible.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-10 17:36:28 +02:00
Chen Minqiang
dcb5cf85c8 ath79: fix missing DEVICE_VENDOR for some devices
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2019-07-10 17:16:49 +02:00
Daniel Golle
c2b1baf767 ramips: add missing DEVICE_VENDOR
Fixes commit ee66fe4ea9
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-10 17:15:49 +02:00
Luis Araneda
472dbaba81 sunxi: convert to multi-variable device title
Use data from the linux-sunxi community wiki to
fill-in missing device information

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-10 17:01:13 +02:00
Luis Araneda
87552e5400 ipq40xx: convert to multi-variable device title
Additionally, fix some vendor and board names

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-10 16:57:52 +02:00
Moritz Warning
5850487473 kirkwood: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-07-10 16:56:16 +02:00
Moritz Warning
c82a861d90 ath25: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-07-10 16:56:16 +02:00
Daniel Golle
08e0db3e98 oxnas: convert DEVICE_TITLE to new variables
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-07-10 16:56:16 +02:00
Fredrik Olofsson
7d96c301d6 kernel: cherry pick patch removing __linux__ check
This is already included in newer upstream. Needed to build BPF programs
using the MIPS kernel include files.

Without this patch, clang fails with "#error Use a Linux compiler or
give up." in sgidefs.h when building BPF programs.

Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
2019-07-10 16:56:16 +02:00
John Crispin
9e57b62783 include/package.mk: Add support for src-checkout/ folder
This feature is similar to the SRC_TREE_OVERRIDE. However instead of having
to manually create a symlink inside the package folder, the buildsystem
will check if $(TOP_DIR)/src-checkout/$(PKG_NAME)/.git is present and use
this instead.

Signed-off-by: John Crispin <john@phrozen.org>
2019-07-10 14:00:19 +02:00
Adrian Schmutzler
1174b94bc9 ath79: Fix whitespace errors in 11-ath10k-caldata
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-09 23:05:51 +02:00
Adrian Schmutzler
6ed3349308 base-files: Fix path check in get_mac_binary
Logic was inverted when changing from string check to file check.
Fix it.

Fixes: 8592602d0a ("base-files: Really check path in get_mac_binary")
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-09 23:05:51 +02:00
Adrian Schmutzler
9ef53b93cb rb532: Fix missing DEVICE_TITLE
This fixes the collection of target info during build, where the
device title for rb532/nand is just empty:
tmp/.config-target.in:44925:warning: leading whitespace ignored
tmp/.config-target.in:123738:warning: leading whitespace ignored
tmp/.config-target.in:123786:warning: leading whitespace ignored

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-09 20:08:26 +01:00
Koen Vandeputte
fa2435903f kernel: bump 4.19 to 4.19.57
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-09 17:03:18 +02:00
Koen Vandeputte
0051fff171 kernel: bump 4.14 to 4.14.132
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-07-09 17:03:10 +02:00
Kevin Darbyshire-Bryant
b31f9190c3 netsupport: move out sch_cake from kmod-sched
Fix file installation clash between kmod-sched & kmod-sched-cake as both
try to install sch_cake.ko

Remove cake from kmod-sched package as cake is supposed to be the
optional qdisc.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-09 13:54:24 +01:00
Lucian Cristian
483b9a92b3 kernel: x86: enable NVME support for 64 bit target
Newer motherboards support NVMe U.2 connectors but also NVMe storage can
be used on add-on pcie adapters.
Enable kernel driver on x86 for now so the NVMe flash storage can be used

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2019-07-09 13:57:31 +02:00
Chuanhong Guo
7a8d3432c7 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB
Upstream kernel added support for RAW_APPENDED_DTB on ralink arch
in the following commit:
02564fc89d3d ("ralink: Introduce fw_passed_dtb to arch/mips/ralink")

Use upstream solution and get rid of our OWRTDTB hack.
This commit set DEVICE_DTS to $$(DTS) instead of replacing DTS with
DEVICE_DTS in device profile because DTS variable will be dropped
in later commits.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[Tested on mt7621/mt76x8]
Tested-by: Chuanhong Guo <gch981213@gmail.com>
[Tested on rt305x/mt7620]
Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2019-07-08 22:00:24 +02:00
Rosen Penev
653e05d27f usbreset: Add missing header
Fixes undefined reference to strtoul

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-07-08 17:01:54 +02:00
Konstantin Demin
5dc7d63d0a netsupport: move out mqprio from kmod-sched
Currently, there's unable to install "kmod-sched-mqprio" after
"kmod-sched" (or vice versa), because "sch_mqprio.ko" is
shipped in both packages.

Fixes: f83522fa63 ("linux: Add kmod-sched-mqprio")
Fixes: 6af639e0bf ("linux: Add kmod-sched-act-vlan")
Fixes: 72c7e2dc46 ("linux: Add kmod-sched-flower")
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
[Add cls_flower and act_vlan]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-08 16:42:26 +02:00
Daniel Engberg
d51f53b5ba util-linux: Update to 2.34
Update util-linux to 2.34
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-07-08 16:42:26 +02:00
Daniel Engberg
6fac9077c6 tools/gengetopt: Update to 2.23
Update gengetopt to 2.23
Remove 100-dependency_fix.patch, fixed upstream
Rework no tests and docs patch
Fix typo in copyright section

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-07-08 16:42:26 +02:00
Adrian Schmutzler
301a78d1d5 ath79: Add missing IMAGE_SIZE for Etactica EG200
The Etactica EG200 is the only device in ath79 despite nand
target that lacks IMAGE_SIZE.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-08 16:28:47 +02:00
Luis Araneda
c3253b52a2 zynq: convert to multi-variable device title
Use the newly introduced variables to better differentiate
between vendor, model and revision

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-08 16:28:47 +02:00