mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-18 21:28:02 +00:00
kernel: bump 6.1 to 6.1.39
Removed upstreamed: generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1] generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2] bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3] bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4] bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5] bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6] bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7] mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8] qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9] Manually rebased: bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4 Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: John Audia <therealgraysky@proton.me> [ rebase bcm27xx and mediatek patches, refresh commit description ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [ minor fixup to bcm27xx patches, refresh commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This commit is contained in:
John Audia
Hauke Mehrtens
parent
a110de8152
commit
fec22f8375
@ -1,2 +1,2 @@
|
||||
LINUX_VERSION-6.1 = .38
|
||||
LINUX_KERNEL_HASH-6.1.38 = f9a4f91b609f7d332a5f2be01ab86336fa00149fae6bdc19f16fa19f78802d43
|
||||
LINUX_VERSION-6.1 = .39
|
||||
LINUX_KERNEL_HASH-6.1.39 = 4cddee22fdf657138a06af653492f67cd3a4762c04a34725534bd200d99085b8
|
||||
@ -1,308 +0,0 @@
|
||||
From 5365030a003a6cb0c336202256341e4bc9d65d52 Mon Sep 17 00:00:00 2001
|
||||
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
Date: Thu, 16 Dec 2021 15:25:35 +0000
|
||||
Subject: [PATCH] drm/bridge: Introduce pre_enable_upstream_first to
|
||||
alter bridge init order
|
||||
|
||||
DSI sink devices typically want the DSI host powered up and configured
|
||||
before they are powered up. pre_enable is the place this would normally
|
||||
happen, but they are called in reverse order from panel/connector towards
|
||||
the encoder, which is the "wrong" order.
|
||||
|
||||
Add a new flag pre_enable_upstream_first that any bridge can set
|
||||
to swap the order of pre_enable (and post_disable) for that and the
|
||||
immediately upstream bridge.
|
||||
Should the immediately upstream bridge also set the
|
||||
pre_enable_upstream_first flag, the bridge upstream of that will be called
|
||||
before either of those which requested pre_enable_upstream_first.
|
||||
|
||||
eg:
|
||||
- Panel
|
||||
- Bridge 1
|
||||
- Bridge 2 pre_enable_upstream_first
|
||||
- Bridge 3
|
||||
- Bridge 4 pre_enable_upstream_first
|
||||
- Bridge 5 pre_enable_upstream_first
|
||||
- Bridge 6
|
||||
- Encoder
|
||||
Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3,
|
||||
Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.
|
||||
|
||||
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
---
|
||||
drivers/gpu/drm/drm_bridge.c | 177 +++++++++++++++++++++++++----------
|
||||
include/drm/drm_bridge.h | 8 ++
|
||||
2 files changed, 137 insertions(+), 48 deletions(-)
|
||||
|
||||
--- a/drivers/gpu/drm/drm_bridge.c
|
||||
+++ b/drivers/gpu/drm/drm_bridge.c
|
||||
@@ -547,20 +547,15 @@ EXPORT_SYMBOL(drm_bridge_chain_disable);
|
||||
* encoder chain, starting from the first bridge to the last. These are called
|
||||
* after completing the encoder's prepare op.
|
||||
*
|
||||
+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that
|
||||
+ * bridge will be called before the previous one to reverse the @pre_enable
|
||||
+ * calling direction.
|
||||
+ *
|
||||
* Note: the bridge passed should be the one closest to the encoder
|
||||
*/
|
||||
void drm_bridge_chain_post_disable(struct drm_bridge *bridge)
|
||||
{
|
||||
- struct drm_encoder *encoder;
|
||||
-
|
||||
- if (!bridge)
|
||||
- return;
|
||||
-
|
||||
- encoder = bridge->encoder;
|
||||
- list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) {
|
||||
- if (bridge->funcs->post_disable)
|
||||
- bridge->funcs->post_disable(bridge);
|
||||
- }
|
||||
+ drm_atomic_bridge_chain_post_disable(bridge, NULL);
|
||||
}
|
||||
EXPORT_SYMBOL(drm_bridge_chain_post_disable);
|
||||
|
||||
@@ -602,24 +597,14 @@ EXPORT_SYMBOL(drm_bridge_chain_mode_set)
|
||||
* chain, starting from the last bridge to the first. These are called
|
||||
* before calling the encoder's commit op.
|
||||
*
|
||||
+ * If a bridge sets @pre_enable_upstream_first, then the @pre_enable for the
|
||||
+ * previous bridge will be called before @pre_enable of this bridge.
|
||||
+ *
|
||||
* Note: the bridge passed should be the one closest to the encoder
|
||||
*/
|
||||
void drm_bridge_chain_pre_enable(struct drm_bridge *bridge)
|
||||
{
|
||||
- struct drm_encoder *encoder;
|
||||
- struct drm_bridge *iter;
|
||||
-
|
||||
- if (!bridge)
|
||||
- return;
|
||||
-
|
||||
- encoder = bridge->encoder;
|
||||
- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
|
||||
- if (iter->funcs->pre_enable)
|
||||
- iter->funcs->pre_enable(iter);
|
||||
-
|
||||
- if (iter == bridge)
|
||||
- break;
|
||||
- }
|
||||
+ drm_atomic_bridge_chain_pre_enable(bridge, NULL);
|
||||
}
|
||||
EXPORT_SYMBOL(drm_bridge_chain_pre_enable);
|
||||
|
||||
@@ -691,6 +676,25 @@ void drm_atomic_bridge_chain_disable(str
|
||||
}
|
||||
EXPORT_SYMBOL(drm_atomic_bridge_chain_disable);
|
||||
|
||||
+static void drm_atomic_bridge_call_post_disable(struct drm_bridge *bridge,
|
||||
+ struct drm_atomic_state *old_state)
|
||||
+{
|
||||
+ if (old_state && bridge->funcs->atomic_post_disable) {
|
||||
+ struct drm_bridge_state *old_bridge_state;
|
||||
+
|
||||
+ old_bridge_state =
|
||||
+ drm_atomic_get_old_bridge_state(old_state,
|
||||
+ bridge);
|
||||
+ if (WARN_ON(!old_bridge_state))
|
||||
+ return;
|
||||
+
|
||||
+ bridge->funcs->atomic_post_disable(bridge,
|
||||
+ old_bridge_state);
|
||||
+ } else if (bridge->funcs->post_disable) {
|
||||
+ bridge->funcs->post_disable(bridge);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
/**
|
||||
* drm_atomic_bridge_chain_post_disable - cleans up after disabling all bridges
|
||||
* in the encoder chain
|
||||
@@ -701,6 +705,9 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_di
|
||||
* &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain,
|
||||
* starting from the first bridge to the last. These are called after completing
|
||||
* &drm_encoder_helper_funcs.atomic_disable
|
||||
+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that
|
||||
+ * bridge will be called before the previous one to reverse the @pre_enable
|
||||
+ * calling direction.
|
||||
*
|
||||
* Note: the bridge passed should be the one closest to the encoder
|
||||
*/
|
||||
@@ -708,30 +715,75 @@ void drm_atomic_bridge_chain_post_disabl
|
||||
struct drm_atomic_state *old_state)
|
||||
{
|
||||
struct drm_encoder *encoder;
|
||||
+ struct drm_bridge *next, *limit;
|
||||
|
||||
if (!bridge)
|
||||
return;
|
||||
|
||||
encoder = bridge->encoder;
|
||||
+
|
||||
list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) {
|
||||
- if (bridge->funcs->atomic_post_disable) {
|
||||
- struct drm_bridge_state *old_bridge_state;
|
||||
+ limit = NULL;
|
||||
|
||||
- old_bridge_state =
|
||||
- drm_atomic_get_old_bridge_state(old_state,
|
||||
- bridge);
|
||||
- if (WARN_ON(!old_bridge_state))
|
||||
- return;
|
||||
+ if (!list_is_last(&bridge->chain_node, &encoder->bridge_chain)) {
|
||||
+ next = list_next_entry(bridge, chain_node);
|
||||
|
||||
- bridge->funcs->atomic_post_disable(bridge,
|
||||
- old_bridge_state);
|
||||
- } else if (bridge->funcs->post_disable) {
|
||||
- bridge->funcs->post_disable(bridge);
|
||||
+ if (next->pre_enable_upstream_first) {
|
||||
+ /* Downstream bridge had requested that upstream
|
||||
+ * was enabled first, so disabled last
|
||||
+ */
|
||||
+ limit = next;
|
||||
+
|
||||
+ /* Find the next bridge that has NOT requested
|
||||
+ * upstream to be enabled first / disabled last
|
||||
+ */
|
||||
+ list_for_each_entry_from(next, &encoder->bridge_chain,
|
||||
+ chain_node) {
|
||||
+ if (next->pre_enable_upstream_first) {
|
||||
+ next = list_prev_entry(next, chain_node);
|
||||
+ limit = next;
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ /* Call these bridges in reverse order */
|
||||
+ list_for_each_entry_from_reverse(next, &encoder->bridge_chain,
|
||||
+ chain_node) {
|
||||
+ if (next == bridge)
|
||||
+ break;
|
||||
+
|
||||
+ drm_atomic_bridge_call_post_disable(next,
|
||||
+ old_state);
|
||||
+ }
|
||||
+ }
|
||||
}
|
||||
+
|
||||
+ drm_atomic_bridge_call_post_disable(bridge, old_state);
|
||||
+
|
||||
+ if (limit)
|
||||
+ bridge = limit;
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL(drm_atomic_bridge_chain_post_disable);
|
||||
|
||||
+static void drm_atomic_bridge_call_pre_enable(struct drm_bridge *bridge,
|
||||
+ struct drm_atomic_state *old_state)
|
||||
+{
|
||||
+ if (old_state && bridge->funcs->atomic_pre_enable) {
|
||||
+ struct drm_bridge_state *old_bridge_state;
|
||||
+
|
||||
+ old_bridge_state =
|
||||
+ drm_atomic_get_old_bridge_state(old_state,
|
||||
+ bridge);
|
||||
+ if (WARN_ON(!old_bridge_state))
|
||||
+ return;
|
||||
+
|
||||
+ bridge->funcs->atomic_pre_enable(bridge, old_bridge_state);
|
||||
+ } else if (bridge->funcs->pre_enable) {
|
||||
+ bridge->funcs->pre_enable(bridge);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
/**
|
||||
* drm_atomic_bridge_chain_pre_enable - prepares for enabling all bridges in
|
||||
* the encoder chain
|
||||
@@ -743,33 +795,62 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_po
|
||||
* starting from the last bridge to the first. These are called before calling
|
||||
* &drm_encoder_helper_funcs.atomic_enable
|
||||
*
|
||||
+ * If a bridge sets @pre_enable_upstream_first, then the pre_enable for the
|
||||
+ * upstream bridge will be called before pre_enable of this bridge.
|
||||
+ *
|
||||
* Note: the bridge passed should be the one closest to the encoder
|
||||
*/
|
||||
void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge,
|
||||
struct drm_atomic_state *old_state)
|
||||
{
|
||||
struct drm_encoder *encoder;
|
||||
- struct drm_bridge *iter;
|
||||
+ struct drm_bridge *iter, *next, *limit;
|
||||
|
||||
if (!bridge)
|
||||
return;
|
||||
|
||||
encoder = bridge->encoder;
|
||||
- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
|
||||
- if (iter->funcs->atomic_pre_enable) {
|
||||
- struct drm_bridge_state *old_bridge_state;
|
||||
|
||||
- old_bridge_state =
|
||||
- drm_atomic_get_old_bridge_state(old_state,
|
||||
- iter);
|
||||
- if (WARN_ON(!old_bridge_state))
|
||||
- return;
|
||||
+ list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
|
||||
+ if (iter->pre_enable_upstream_first) {
|
||||
+ next = iter;
|
||||
+ limit = bridge;
|
||||
+ list_for_each_entry_from_reverse(next,
|
||||
+ &encoder->bridge_chain,
|
||||
+ chain_node) {
|
||||
+ if (next == bridge)
|
||||
+ break;
|
||||
+
|
||||
+ if (!next->pre_enable_upstream_first) {
|
||||
+ /* Found first bridge that does NOT
|
||||
+ * request upstream to be enabled first
|
||||
+ */
|
||||
+ limit = list_prev_entry(next, chain_node);
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ list_for_each_entry_from(next, &encoder->bridge_chain, chain_node) {
|
||||
+ /* Call requested upstream bridge pre_enable
|
||||
+ * in order.
|
||||
+ */
|
||||
+ if (next == iter)
|
||||
+ /* At the first bridgge to request upstream
|
||||
+ * bridges called first.
|
||||
+ */
|
||||
+ break;
|
||||
|
||||
- iter->funcs->atomic_pre_enable(iter, old_bridge_state);
|
||||
- } else if (iter->funcs->pre_enable) {
|
||||
- iter->funcs->pre_enable(iter);
|
||||
+ drm_atomic_bridge_call_pre_enable(next, old_state);
|
||||
+ }
|
||||
}
|
||||
|
||||
+ drm_atomic_bridge_call_pre_enable(iter, old_state);
|
||||
+
|
||||
+ if (iter->pre_enable_upstream_first)
|
||||
+ /* Jump all bridges that we have already pre_enabled
|
||||
+ */
|
||||
+ iter = limit;
|
||||
+
|
||||
if (iter == bridge)
|
||||
break;
|
||||
}
|
||||
--- a/include/drm/drm_bridge.h
|
||||
+++ b/include/drm/drm_bridge.h
|
||||
@@ -769,6 +769,14 @@ struct drm_bridge {
|
||||
*/
|
||||
bool interlace_allowed;
|
||||
/**
|
||||
+ * @pre_enable_upstream_first: The bridge requires that the upstream
|
||||
+ * bridge @pre_enable function is called before its @pre_enable,
|
||||
+ * and conversely for post_disable. This is most frequently a
|
||||
+ * requirement for DSI devices which need the host to be initialised
|
||||
+ * before the peripheral.
|
||||
+ */
|
||||
+ bool pre_enable_upstream_first;
|
||||
+ /**
|
||||
* @ddc: Associated I2C adapter for DDC access, if any.
|
||||
*/
|
||||
struct i2c_adapter *ddc;
|
||||
@ -1,32 +1,33 @@
|
||||
From 9ac3eedd8cda7d5f2429edc0bdba137c35e07157 Mon Sep 17 00:00:00 2001
|
||||
From 5ea6b17027810ffbdb5bea7d0a2b1d312dd1021c Mon Sep 17 00:00:00 2001
|
||||
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
Date: Wed, 23 Feb 2022 15:36:56 +0000
|
||||
Subject: [PATCH] drm/panel: Add prepare_upstream_first flag to
|
||||
drm_panel
|
||||
Date: Mon, 5 Dec 2022 17:33:27 +0000
|
||||
Subject: [PATCH] drm/panel: Add prepare_prev_first flag to drm_panel
|
||||
|
||||
Mapping to the drm_bridge flag pre_enable_upstream_first,
|
||||
add a new flag prepare_upstream_first to drm_panel to allow
|
||||
Mapping to the drm_bridge flag pre_enable_prev_first,
|
||||
add a new flag prepare_prev_first to drm_panel to allow
|
||||
the panel driver to request that the upstream bridge should
|
||||
be pre_enabled before the panel prepare.
|
||||
|
||||
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
||||
Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.com
|
||||
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
||||
---
|
||||
drivers/gpu/drm/bridge/panel.c | 3 +++
|
||||
drivers/gpu/drm/bridge/panel.c | 2 ++
|
||||
include/drm/drm_panel.h | 10 ++++++++++
|
||||
2 files changed, 13 insertions(+)
|
||||
2 files changed, 12 insertions(+)
|
||||
|
||||
--- a/drivers/gpu/drm/bridge/panel.c
|
||||
+++ b/drivers/gpu/drm/bridge/panel.c
|
||||
@@ -258,6 +258,9 @@ struct drm_bridge *drm_panel_bridge_add_
|
||||
panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES;
|
||||
panel_bridge->bridge.type = connector_type;
|
||||
@@ -368,6 +368,8 @@ struct drm_bridge *devm_drm_panel_bridge
|
||||
devres_free(ptr);
|
||||
}
|
||||
|
||||
+ panel_bridge->bridge.pre_enable_upstream_first =
|
||||
+ panel->prepare_upstream_first;
|
||||
+ bridge->pre_enable_prev_first = panel->prepare_prev_first;
|
||||
+
|
||||
drm_bridge_add(&panel_bridge->bridge);
|
||||
|
||||
return &panel_bridge->bridge;
|
||||
return bridge;
|
||||
}
|
||||
EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed);
|
||||
--- a/include/drm/drm_panel.h
|
||||
+++ b/include/drm/drm_panel.h
|
||||
@@ -196,6 +196,16 @@ struct drm_panel {
|
||||
@ -35,14 +36,14 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
struct list_head list;
|
||||
+
|
||||
+ /**
|
||||
+ * @prepare_upstream_first:
|
||||
+ * @prepare_prev_first:
|
||||
+ *
|
||||
+ * The upstream controller should be prepared first, before the prepare
|
||||
+ * The previous controller should be prepared first, before the prepare
|
||||
+ * for the panel is called. This is largely required for DSI panels
|
||||
+ * where the DSI host controller should be initialised to LP-11 before
|
||||
+ * the panel is powered up.
|
||||
+ */
|
||||
+ bool prepare_upstream_first;
|
||||
+ bool prepare_prev_first;
|
||||
};
|
||||
|
||||
void drm_panel_init(struct drm_panel *panel, struct device *dev,
|
||||
|
||||
@ -20,7 +20,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
|
||||
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
@@ -393,7 +393,7 @@ static const struct gpio_chip bcm2835_gp
|
||||
@@ -391,7 +391,7 @@ static const struct gpio_chip bcm2835_gp
|
||||
.get = bcm2835_gpio_get,
|
||||
.set = bcm2835_gpio_set,
|
||||
.set_config = gpiochip_generic_config,
|
||||
@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
.ngpio = BCM2835_NUM_GPIOS,
|
||||
.can_sleep = false,
|
||||
.of_gpio_ranges_fallback = bcm2835_of_gpio_ranges_fallback,
|
||||
@@ -410,7 +410,7 @@ static const struct gpio_chip bcm2711_gp
|
||||
@@ -408,7 +408,7 @@ static const struct gpio_chip bcm2711_gp
|
||||
.get = bcm2835_gpio_get,
|
||||
.set = bcm2835_gpio_set,
|
||||
.set_config = gpiochip_generic_config,
|
||||
|
||||
@ -325,7 +325,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
}
|
||||
--- a/drivers/mmc/core/quirks.h
|
||||
+++ b/drivers/mmc/core/quirks.h
|
||||
@@ -106,6 +106,14 @@ static const struct mmc_fixup __maybe_un
|
||||
@@ -129,6 +129,14 @@ static const struct mmc_fixup __maybe_un
|
||||
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd,
|
||||
MMC_QUIRK_BROKEN_SD_DISCARD),
|
||||
|
||||
@ -2007,9 +2007,9 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
sdhci_dumpregs(host);
|
||||
--- a/include/linux/mmc/card.h
|
||||
+++ b/include/linux/mmc/card.h
|
||||
@@ -295,6 +295,8 @@ struct mmc_card {
|
||||
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
|
||||
@@ -296,6 +296,8 @@ struct mmc_card {
|
||||
#define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */
|
||||
#define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */
|
||||
|
||||
+#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */
|
||||
+
|
||||
|
||||
@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
||||
|
||||
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
@@ -1357,7 +1357,7 @@ static int bcm2835_pinctrl_probe(struct
|
||||
@@ -1355,7 +1355,7 @@ static int bcm2835_pinctrl_probe(struct
|
||||
girq->default_type = IRQ_TYPE_NONE;
|
||||
girq->handler = handle_level_irq;
|
||||
|
||||
|
||||
@ -158,14 +158,14 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
pagelistinfo->scatterlist_mapped = 0;
|
||||
|
||||
@@ -468,6 +515,7 @@ free_pagelist(struct vchiq_instance *ins
|
||||
int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state)
|
||||
static int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
+ struct device *dma_dev = NULL;
|
||||
struct vchiq_drvdata *drvdata = platform_get_drvdata(pdev);
|
||||
struct rpi_firmware *fw = drvdata->fw;
|
||||
struct vchiq_slot_zero *vchiq_slot_zero;
|
||||
@@ -489,6 +537,24 @@ int vchiq_platform_init(struct platform_
|
||||
@@ -489,6 +537,24 @@ static int vchiq_platform_init(struct pl
|
||||
g_cache_line_size = drvdata->cache_line_size;
|
||||
g_fragments_size = 2 * g_cache_line_size;
|
||||
|
||||
@ -190,7 +190,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
/* Allocate space for the channels in coherent memory */
|
||||
slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE);
|
||||
frag_mem_size = PAGE_ALIGN(g_fragments_size * MAX_FRAGMENTS);
|
||||
@@ -501,13 +567,14 @@ int vchiq_platform_init(struct platform_
|
||||
@@ -501,13 +567,14 @@ static int vchiq_platform_init(struct pl
|
||||
}
|
||||
|
||||
WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0);
|
||||
@ -206,7 +206,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] =
|
||||
MAX_FRAGMENTS;
|
||||
|
||||
@@ -541,7 +608,6 @@ int vchiq_platform_init(struct platform_
|
||||
@@ -541,7 +608,6 @@ static int vchiq_platform_init(struct pl
|
||||
}
|
||||
|
||||
/* Send the base address of the slots to VideoCore */
|
||||
@ -214,7 +214,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
err = rpi_firmware_property(fw, RPI_FIRMWARE_VCHIQ_INIT,
|
||||
&channelbase, sizeof(channelbase));
|
||||
if (err || channelbase) {
|
||||
@@ -549,6 +615,8 @@ int vchiq_platform_init(struct platform_
|
||||
@@ -549,6 +615,8 @@ static int vchiq_platform_init(struct pl
|
||||
return err ? : -ENXIO;
|
||||
}
|
||||
|
||||
|
||||
@ -102,7 +102,7 @@ Signed-off-by: Oliver Gjoneski <ogjoneski@gmail.com>
|
||||
pagelistinfo->dma_dir = (type == PAGELIST_WRITE) ?
|
||||
DMA_TO_DEVICE : DMA_FROM_DEVICE;
|
||||
pagelistinfo->num_pages = num_pages;
|
||||
@@ -616,6 +634,13 @@ int vchiq_platform_init(struct platform_
|
||||
@@ -616,6 +634,13 @@ static int vchiq_platform_init(struct pl
|
||||
}
|
||||
|
||||
g_dma_dev = dma_dev ?: dev;
|
||||
|
||||
@ -13,7 +13,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
|
||||
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
@@ -928,9 +928,12 @@ static int bcm2835_pmx_free(struct pinct
|
||||
@@ -926,9 +926,12 @@ static int bcm2835_pmx_free(struct pinct
|
||||
unsigned offset)
|
||||
{
|
||||
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||
@ -28,7 +28,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -972,10 +975,7 @@ static void bcm2835_pmx_gpio_disable_fre
|
||||
@@ -970,10 +973,7 @@ static void bcm2835_pmx_gpio_disable_fre
|
||||
struct pinctrl_gpio_range *range,
|
||||
unsigned offset)
|
||||
{
|
||||
|
||||
@ -2,12 +2,12 @@ From 942d55434af46aebe8f5508995807253a6b235b3 Mon Sep 17 00:00:00 2001
|
||||
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
Date: Thu, 31 Mar 2022 12:05:04 +0100
|
||||
Subject: [PATCH] drm/panel: panel-ilitek9881c: Add
|
||||
prepare_upstream_first flag
|
||||
prepare_prev_first flag
|
||||
|
||||
The panel sends MIPI DCS commands during prepare and is expecting
|
||||
the bus to remain in LP-11 state in-between.
|
||||
|
||||
Set the prepare_upstream_first flag so that the upstream DSI host
|
||||
Set the prepare_prev_first flag so that the upstream DSI host
|
||||
is prepared / pre_enabled first, and therefore the bus is in a
|
||||
defined state.
|
||||
|
||||
@ -22,7 +22,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
||||
ctx->dsi = dsi;
|
||||
ctx->desc = of_device_get_match_data(&dsi->dev);
|
||||
|
||||
+ ctx->panel.prepare_upstream_first = true;
|
||||
+ ctx->panel.prepare_prev_first = true;
|
||||
drm_panel_init(&ctx->panel, &dsi->dev, &ili9881c_funcs,
|
||||
DRM_MODE_CONNECTOR_DSI);
|
||||
|
||||
|
||||
@ -1,27 +0,0 @@
|
||||
From 10fcafcad54e1d055b6b67881a5b52b95dbd2da3 Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.com>
|
||||
Date: Fri, 7 Oct 2022 10:38:31 +0100
|
||||
Subject: [PATCH] nvmem: Use NVMEM_DEVID_AUTO
|
||||
|
||||
It is reasonable to declare multiple nvmem blocks. Unless a unique 'id'
|
||||
is passed in for each block there may be name clashes.
|
||||
|
||||
Avoid this by using the magic token NVMEM_DEVID_AUTO.
|
||||
|
||||
Fixes: 5a3fa75a4d9cb ("nvmem: Add driver to expose reserved memory as nvmem")
|
||||
|
||||
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
---
|
||||
drivers/nvmem/rmem.c | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/drivers/nvmem/rmem.c
|
||||
+++ b/drivers/nvmem/rmem.c
|
||||
@@ -71,6 +71,7 @@ static int rmem_probe(struct platform_de
|
||||
config.dev = dev;
|
||||
config.priv = priv;
|
||||
config.name = "rmem";
|
||||
+ config.id = NVMEM_DEVID_AUTO;
|
||||
config.size = mem->size;
|
||||
config.reg_read = rmem_read;
|
||||
|
||||
@ -31,11 +31,11 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
@@ -4568,7 +4569,9 @@ static int hci_dev_setup_sync(struct hci
|
||||
|
||||
if (!ret) {
|
||||
if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
|
||||
- if (!bacmp(&hdev->public_addr, BDADDR_ANY))
|
||||
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY) &&
|
||||
+ (invalid_bdaddr ||
|
||||
+ !fwnode_property_present(fwnode, "fallback-bd-address")))
|
||||
hci_dev_get_bd_addr_from_property(hdev);
|
||||
if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) &&
|
||||
- !bacmp(&hdev->public_addr, BDADDR_ANY))
|
||||
+ !bacmp(&hdev->public_addr, BDADDR_ANY) &&
|
||||
+ (invalid_bdaddr ||
|
||||
+ !fwnode_property_present(fwnode, "fallback-bd-address")))
|
||||
hci_dev_get_bd_addr_from_property(hdev);
|
||||
|
||||
if (bacmp(&hdev->public_addr, BDADDR_ANY) &&
|
||||
if ((invalid_bdaddr ||
|
||||
|
||||
@ -19,7 +19,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
|
||||
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
||||
@@ -422,15 +422,32 @@ static void bcm2835_gpio_irq_handle_bank
|
||||
@@ -420,15 +420,32 @@ static void bcm2835_gpio_irq_handle_bank
|
||||
unsigned long events;
|
||||
unsigned offset;
|
||||
unsigned gpio;
|
||||
@ -52,7 +52,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
}
|
||||
|
||||
static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
|
||||
@@ -670,11 +687,7 @@ static int bcm2835_gpio_irq_set_type(str
|
||||
@@ -668,11 +685,7 @@ static int bcm2835_gpio_irq_set_type(str
|
||||
|
||||
static void bcm2835_gpio_irq_ack(struct irq_data *data)
|
||||
{
|
||||
|
||||
@ -1,36 +0,0 @@
|
||||
From 085679b15b5af65f9610f619afde41da0f966194 Mon Sep 17 00:00:00 2001
|
||||
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
|
||||
Date: Wed, 16 Nov 2022 13:49:32 +0100
|
||||
Subject: [PATCH] mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908
|
||||
|
||||
Commit dd5c672d7ca9 ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA")
|
||||
removes config ARCH_BCM4908 as config ARCH_BCMBCA has the same intent.
|
||||
|
||||
Probably due to concurrent development, commit 002181f5b150 ("mtd: parsers:
|
||||
add Broadcom's U-Boot parser") introduces 'Broadcom's U-Boot partition
|
||||
parser' that depends on ARCH_BCM4908, but this use was not visible during
|
||||
the config refactoring from the commit above. Hence, these two changes
|
||||
create a reference to a non-existing config symbol.
|
||||
|
||||
Adjust the MTD_BRCM_U_BOOT definition to refer to ARCH_BCMBCA instead of
|
||||
ARCH_BCM4908 to remove the reference to the non-existing config symbol
|
||||
ARCH_BCM4908.
|
||||
|
||||
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
|
||||
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
||||
Link: https://lore.kernel.org/linux-mtd/20221116124932.4748-1-lukas.bulwahn@gmail.com
|
||||
---
|
||||
drivers/mtd/parsers/Kconfig | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/mtd/parsers/Kconfig
|
||||
+++ b/drivers/mtd/parsers/Kconfig
|
||||
@@ -22,7 +22,7 @@ config MTD_BCM63XX_PARTS
|
||||
|
||||
config MTD_BRCM_U_BOOT
|
||||
tristate "Broadcom's U-Boot partition parser"
|
||||
- depends on ARCH_BCM4908 || COMPILE_TEST
|
||||
+ depends on ARCH_BCMBCA || COMPILE_TEST
|
||||
help
|
||||
Broadcom uses a custom way of storing U-Boot environment variables.
|
||||
They are placed inside U-Boot partition itself at unspecified offset.
|
||||
@ -460,7 +460,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
||||
};
|
||||
};
|
||||
|
||||
@@ -558,24 +390,4 @@
|
||||
@@ -557,24 +389,4 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,32 +0,0 @@
|
||||
From d3c8e2c5757153bbfad70019ec1decbca86f3def Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Wed, 3 May 2023 14:28:30 +0200
|
||||
Subject: [PATCH] ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
There is no such property in the SPI controller binding documentation.
|
||||
Also Linux driver doesn't look for it.
|
||||
|
||||
This fixes:
|
||||
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected)
|
||||
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
|
||||
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com
|
||||
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/bcm5301x.dtsi | 1 -
|
||||
1 file changed, 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/bcm5301x.dtsi
|
||||
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
|
||||
@@ -335,7 +335,6 @@
|
||||
"spi_lr_session_done",
|
||||
"spi_lr_overread";
|
||||
clocks = <&iprocmed>;
|
||||
- clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -1,44 +0,0 @@
|
||||
From fd274b733bfdde3ca72f0fa2a37f032f3a8c402c Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Thu, 8 Jun 2023 17:36:29 +0200
|
||||
Subject: [PATCH] ARM: dts: BCM5301X: fix duplex-full => full-duplex
|
||||
|
||||
this typo was found by the dtbs_check
|
||||
| ports:port@5:fixed-link: 'oneOf' conditional failed,
|
||||
| {'speed': [[1000]], 'duplex-full': True} is not of type 'array'
|
||||
| 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..."
|
||||
|
||||
this should have been full-duplex;
|
||||
|
||||
Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
|
||||
Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32")
|
||||
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
||||
Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com
|
||||
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
||||
---
|
||||
arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 +-
|
||||
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
|
||||
2 files changed, 2 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
|
||||
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
|
||||
@@ -121,7 +121,7 @@
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
- duplex-full;
|
||||
+ full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
|
||||
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
|
||||
@@ -182,7 +182,7 @@
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
- duplex-full;
|
||||
+ full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -87,7 +87,7 @@ Signed-off-by: T.J. Mercier <tjmercier@google.com>
|
||||
mark_page_accessed(page);
|
||||
}
|
||||
rss[mm_counter(page)]--;
|
||||
@@ -5182,8 +5181,8 @@ static inline void mm_account_fault(stru
|
||||
@@ -5189,8 +5188,8 @@ static inline void mm_account_fault(stru
|
||||
#ifdef CONFIG_LRU_GEN
|
||||
static void lru_gen_enter_fault(struct vm_area_struct *vma)
|
||||
{
|
||||
|
||||
@ -1,35 +0,0 @@
|
||||
From cee4bd16c3195a701be683f7da9e88c6e11acb73 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Date: Wed, 19 Apr 2023 23:07:39 +0200
|
||||
Subject: [PATCH 1/5] leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on
|
||||
dev rename
|
||||
|
||||
Dev can be renamed also while up for supported device. We currently
|
||||
wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME
|
||||
event.
|
||||
|
||||
Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and
|
||||
correctly set the NETDEV_LED_MODE_LINKUP bit.
|
||||
|
||||
Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename")
|
||||
Cc: stable@vger.kernel.org # v5.5+
|
||||
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
||||
Signed-off-by: Lee Jones <lee@kernel.org>
|
||||
Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com
|
||||
---
|
||||
drivers/leds/trigger/ledtrig-netdev.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
--- a/drivers/leds/trigger/ledtrig-netdev.c
|
||||
+++ b/drivers/leds/trigger/ledtrig-netdev.c
|
||||
@@ -318,6 +318,9 @@ static int netdev_trig_notify(struct not
|
||||
clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
|
||||
switch (evt) {
|
||||
case NETDEV_CHANGENAME:
|
||||
+ if (netif_carrier_ok(dev))
|
||||
+ set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
|
||||
+ fallthrough;
|
||||
case NETDEV_REGISTER:
|
||||
if (trigger_data->net_dev)
|
||||
dev_put(trigger_data->net_dev);
|
||||
@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
--- a/scripts/mod/modpost.c
|
||||
+++ b/scripts/mod/modpost.c
|
||||
@@ -1817,7 +1817,9 @@ static void read_symbols(const char *mod
|
||||
@@ -1781,7 +1781,9 @@ static void read_symbols(const char *mod
|
||||
symname = remove_dot(info.strtab + sym->st_name);
|
||||
|
||||
handle_symbol(mod, &info, sym, symname);
|
||||
@ -151,7 +151,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
}
|
||||
|
||||
for (sym = info.symtab_start; sym < info.symtab_stop; sym++) {
|
||||
@@ -1980,8 +1982,10 @@ static void add_header(struct buffer *b,
|
||||
@@ -1944,8 +1946,10 @@ static void add_header(struct buffer *b,
|
||||
buf_printf(b, "BUILD_SALT;\n");
|
||||
buf_printf(b, "BUILD_LTO_INFO;\n");
|
||||
buf_printf(b, "\n");
|
||||
@ -162,7 +162,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
buf_printf(b, "\n");
|
||||
buf_printf(b, "__visible struct module __this_module\n");
|
||||
buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n");
|
||||
@@ -1995,8 +1999,10 @@ static void add_header(struct buffer *b,
|
||||
@@ -1959,8 +1963,10 @@ static void add_header(struct buffer *b,
|
||||
buf_printf(b, "\t.arch = MODULE_ARCH_INIT,\n");
|
||||
buf_printf(b, "};\n");
|
||||
|
||||
@ -173,7 +173,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
buf_printf(b,
|
||||
"\n"
|
||||
@@ -2004,8 +2010,10 @@ static void add_header(struct buffer *b,
|
||||
@@ -1968,8 +1974,10 @@ static void add_header(struct buffer *b,
|
||||
"MODULE_INFO(retpoline, \"Y\");\n"
|
||||
"#endif\n");
|
||||
|
||||
@ -184,7 +184,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
if (strstarts(mod->name, "tools/testing"))
|
||||
buf_printf(b, "\nMODULE_INFO(test, \"Y\");\n");
|
||||
@@ -2101,11 +2109,13 @@ static void add_depends(struct buffer *b
|
||||
@@ -2065,11 +2073,13 @@ static void add_depends(struct buffer *b
|
||||
|
||||
static void add_srcversion(struct buffer *b, struct module *mod)
|
||||
{
|
||||
@ -198,7 +198,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
}
|
||||
|
||||
static void write_buf(struct buffer *b, const char *fname)
|
||||
@@ -2191,7 +2201,9 @@ static void write_mod_c_file(struct modu
|
||||
@@ -2155,7 +2165,9 @@ static void write_mod_c_file(struct modu
|
||||
add_exported_symbols(&buf, mod);
|
||||
add_versions(&buf, mod);
|
||||
add_depends(&buf, mod);
|
||||
|
||||
@ -29,7 +29,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support
|
||||
|
||||
#define QUECTEL_VENDOR_ID 0x2c7c
|
||||
/* These Quectel products use Quectel's vendor ID */
|
||||
@@ -1173,6 +1175,11 @@ static const struct usb_device_id option
|
||||
@@ -1177,6 +1179,11 @@ static const struct usb_device_id option
|
||||
.driver_info = ZLP },
|
||||
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
|
||||
.driver_info = RSVD(4) },
|
||||
|
||||
@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
--- a/net/core/sock.c
|
||||
+++ b/net/core/sock.c
|
||||
@@ -4082,6 +4082,8 @@ static __net_initdata struct pernet_oper
|
||||
@@ -4093,6 +4093,8 @@ static __net_initdata struct pernet_oper
|
||||
|
||||
static int __init proto_init(void)
|
||||
{
|
||||
|
||||
@ -1,121 +0,0 @@
|
||||
From eee53f6eb7561f516b9c4bac829ce31c48096130 Mon Sep 17 00:00:00 2001
|
||||
From: Fabian Frederick <fabf@skynet.be>
|
||||
Date: Tue, 9 May 2017 22:30:03 +0200
|
||||
Subject: [PATCH] jffs2: reduce stack usage in jffs2_build_xattr_subsystem()
|
||||
|
||||
Use kcalloc() for allocation/flush of 128 pointers table to
|
||||
reduce stack usage.
|
||||
|
||||
Function now returns -ENOMEM or 0 on success.
|
||||
|
||||
stackusage
|
||||
Before:
|
||||
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208
|
||||
dynamic,bounded
|
||||
|
||||
After:
|
||||
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192
|
||||
dynamic,bounded
|
||||
|
||||
Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled
|
||||
|
||||
Tested with an MTD mount point and some user set/getfattr.
|
||||
|
||||
Many current target on OpenWRT also suffer from a compilation warning
|
||||
(that become an error with CONFIG_WERROR) with the following output:
|
||||
|
||||
fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
|
||||
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
|
||||
887 | }
|
||||
| ^
|
||||
|
||||
Using dynamic allocation fix this compilation warning.
|
||||
|
||||
Fixes: c9f700f840bd ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
|
||||
Reported-by: Tim Gardner <tim.gardner@canonical.com>
|
||||
Reported-by: kernel test robot <lkp@intel.com>
|
||||
Reported-by: Ron Economos <re@w6rz.net>
|
||||
Reported-by: Nathan Chancellor <nathan@kernel.org>
|
||||
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
||||
Signed-off-by: Fabian Frederick <fabf@skynet.be>
|
||||
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
||||
Cc: stable@vger.kernel.org
|
||||
---
|
||||
fs/jffs2/build.c | 5 ++++-
|
||||
fs/jffs2/xattr.c | 13 +++++++++----
|
||||
fs/jffs2/xattr.h | 4 ++--
|
||||
3 files changed, 15 insertions(+), 7 deletions(-)
|
||||
|
||||
--- a/fs/jffs2/build.c
|
||||
+++ b/fs/jffs2/build.c
|
||||
@@ -211,7 +211,10 @@ static int jffs2_build_filesystem(struct
|
||||
ic->scan_dents = NULL;
|
||||
cond_resched();
|
||||
}
|
||||
- jffs2_build_xattr_subsystem(c);
|
||||
+ ret = jffs2_build_xattr_subsystem(c);
|
||||
+ if (ret)
|
||||
+ goto exit;
|
||||
+
|
||||
c->flags &= ~JFFS2_SB_FLAG_BUILDING;
|
||||
|
||||
dbg_fsbuild("FS build complete\n");
|
||||
--- a/fs/jffs2/xattr.c
|
||||
+++ b/fs/jffs2/xattr.c
|
||||
@@ -772,10 +772,10 @@ void jffs2_clear_xattr_subsystem(struct
|
||||
}
|
||||
|
||||
#define XREF_TMPHASH_SIZE (128)
|
||||
-void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c)
|
||||
+int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c)
|
||||
{
|
||||
struct jffs2_xattr_ref *ref, *_ref;
|
||||
- struct jffs2_xattr_ref *xref_tmphash[XREF_TMPHASH_SIZE];
|
||||
+ struct jffs2_xattr_ref **xref_tmphash;
|
||||
struct jffs2_xattr_datum *xd, *_xd;
|
||||
struct jffs2_inode_cache *ic;
|
||||
struct jffs2_raw_node_ref *raw;
|
||||
@@ -784,9 +784,12 @@ void jffs2_build_xattr_subsystem(struct
|
||||
|
||||
BUG_ON(!(c->flags & JFFS2_SB_FLAG_BUILDING));
|
||||
|
||||
+ xref_tmphash = kcalloc(XREF_TMPHASH_SIZE,
|
||||
+ sizeof(struct jffs2_xattr_ref *), GFP_KERNEL);
|
||||
+ if (!xref_tmphash)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
/* Phase.1 : Merge same xref */
|
||||
- for (i=0; i < XREF_TMPHASH_SIZE; i++)
|
||||
- xref_tmphash[i] = NULL;
|
||||
for (ref=c->xref_temp; ref; ref=_ref) {
|
||||
struct jffs2_xattr_ref *tmp;
|
||||
|
||||
@@ -884,6 +887,8 @@ void jffs2_build_xattr_subsystem(struct
|
||||
"%u of xref (%u dead, %u orphan) found.\n",
|
||||
xdatum_count, xdatum_unchecked_count, xdatum_orphan_count,
|
||||
xref_count, xref_dead_count, xref_orphan_count);
|
||||
+ kfree(xref_tmphash);
|
||||
+ return 0;
|
||||
}
|
||||
|
||||
struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
|
||||
--- a/fs/jffs2/xattr.h
|
||||
+++ b/fs/jffs2/xattr.h
|
||||
@@ -71,7 +71,7 @@ static inline int is_xattr_ref_dead(stru
|
||||
#ifdef CONFIG_JFFS2_FS_XATTR
|
||||
|
||||
extern void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c);
|
||||
-extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
|
||||
+extern int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
|
||||
extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
|
||||
|
||||
extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
|
||||
@@ -103,7 +103,7 @@ extern ssize_t jffs2_listxattr(struct de
|
||||
#else
|
||||
|
||||
#define jffs2_init_xattr_subsystem(c)
|
||||
-#define jffs2_build_xattr_subsystem(c)
|
||||
+#define jffs2_build_xattr_subsystem(c) (0)
|
||||
#define jffs2_clear_xattr_subsystem(c)
|
||||
|
||||
#define jffs2_xattr_do_crccheck_inode(c, ic)
|
||||
@ -161,7 +161,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
struct rtnl_link {
|
||||
rtnl_doit_func doit;
|
||||
@@ -4817,7 +4817,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
|
||||
@@ -4823,7 +4823,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
|
||||
brport_nla_put_flag(skb, flags, mask,
|
||||
IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
|
||||
brport_nla_put_flag(skb, flags, mask,
|
||||
|
||||
@ -15,7 +15,7 @@ Signed-off-by: Sam Shih <sam.shih@mediatek.com>
|
||||
|
||||
--- a/drivers/cpufreq/mediatek-cpufreq.c
|
||||
+++ b/drivers/cpufreq/mediatek-cpufreq.c
|
||||
@@ -702,6 +702,15 @@ static const struct mtk_cpufreq_platform
|
||||
@@ -709,6 +709,15 @@ static const struct mtk_cpufreq_platform
|
||||
.ccifreq_supported = false,
|
||||
};
|
||||
|
||||
@ -31,10 +31,10 @@ Signed-off-by: Sam Shih <sam.shih@mediatek.com>
|
||||
static const struct mtk_cpufreq_platform_data mt8183_platform_data = {
|
||||
.min_volt_shift = 100000,
|
||||
.max_volt_shift = 200000,
|
||||
@@ -735,6 +744,7 @@ static const struct of_device_id mtk_cpu
|
||||
@@ -742,6 +751,7 @@ static const struct of_device_id mtk_cpu
|
||||
{ .compatible = "mediatek,mt2712", .data = &mt2701_platform_data },
|
||||
{ .compatible = "mediatek,mt7622", .data = &mt7622_platform_data },
|
||||
{ .compatible = "mediatek,mt7623", .data = &mt7622_platform_data },
|
||||
{ .compatible = "mediatek,mt7623", .data = &mt7623_platform_data },
|
||||
+ { .compatible = "mediatek,mt7988", .data = &mt7988_platform_data },
|
||||
{ .compatible = "mediatek,mt8167", .data = &mt8516_platform_data },
|
||||
{ .compatible = "mediatek,mt817x", .data = &mt2701_platform_data },
|
||||
|
||||
@ -1,53 +0,0 @@
|
||||
From e7697814c142c99f470c3458d49e41b25a575f23 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Golle <daniel@makrotopia.org>
|
||||
Date: Fri, 26 May 2023 10:31:40 +0100
|
||||
Subject: [PATCH] cpufreq: mediatek: correct voltages for MT7622 and MT7623
|
||||
|
||||
The MT6380 regulator typically used together with MT7622 does not
|
||||
support the current maximum processor and SRAM voltage in the cpufreq
|
||||
driver (1360000uV).
|
||||
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
|
||||
avoid having the tracking algorithm request unsupported voltages from
|
||||
the regulator.
|
||||
|
||||
On MT7623 there is no separate SRAM supply and the maximum voltage used
|
||||
is 1300000uV. Create dedicated platform data for MT7623 to cover that
|
||||
case as well.
|
||||
|
||||
Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
|
||||
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
|
||||
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
||||
---
|
||||
drivers/cpufreq/mediatek-cpufreq.c | 13 ++++++++++---
|
||||
1 file changed, 10 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/drivers/cpufreq/mediatek-cpufreq.c
|
||||
+++ b/drivers/cpufreq/mediatek-cpufreq.c
|
||||
@@ -696,9 +696,16 @@ static const struct mtk_cpufreq_platform
|
||||
static const struct mtk_cpufreq_platform_data mt7622_platform_data = {
|
||||
.min_volt_shift = 100000,
|
||||
.max_volt_shift = 200000,
|
||||
- .proc_max_volt = 1360000,
|
||||
+ .proc_max_volt = 1350000,
|
||||
.sram_min_volt = 0,
|
||||
- .sram_max_volt = 1360000,
|
||||
+ .sram_max_volt = 1350000,
|
||||
+ .ccifreq_supported = false,
|
||||
+};
|
||||
+
|
||||
+static const struct mtk_cpufreq_platform_data mt7623_platform_data = {
|
||||
+ .min_volt_shift = 100000,
|
||||
+ .max_volt_shift = 200000,
|
||||
+ .proc_max_volt = 1300000,
|
||||
.ccifreq_supported = false,
|
||||
};
|
||||
|
||||
@@ -743,7 +750,7 @@ static const struct of_device_id mtk_cpu
|
||||
{ .compatible = "mediatek,mt2701", .data = &mt2701_platform_data },
|
||||
{ .compatible = "mediatek,mt2712", .data = &mt2701_platform_data },
|
||||
{ .compatible = "mediatek,mt7622", .data = &mt7622_platform_data },
|
||||
- { .compatible = "mediatek,mt7623", .data = &mt7622_platform_data },
|
||||
+ { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data },
|
||||
{ .compatible = "mediatek,mt7988", .data = &mt7988_platform_data },
|
||||
{ .compatible = "mediatek,mt8167", .data = &mt8516_platform_data },
|
||||
{ .compatible = "mediatek,mt817x", .data = &mt2701_platform_data },
|
||||
@ -1,59 +0,0 @@
|
||||
From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001
|
||||
From: Robert Marko <robimarko@gmail.com>
|
||||
Date: Mon, 7 Nov 2022 14:28:59 +0100
|
||||
Subject: [PATCH] clk: qcom: reset: support resetting multiple bits
|
||||
|
||||
This patch adds the support for giving the complete bitmask
|
||||
in reset structure and reset operation will use this bitmask
|
||||
for all reset operations.
|
||||
|
||||
Currently, reset structure only takes a single bit for each reset
|
||||
and then calculates the bitmask by using the BIT() macro.
|
||||
|
||||
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
|
||||
IPQ6018 and more, since their networking resets require multiple bits
|
||||
to be asserted in order to properly reset the HW block completely.
|
||||
|
||||
So, in order to allow asserting multiple bits add "bitmask" field to
|
||||
qcom_reset_map, and then use that bitmask value if its populated in the
|
||||
driver, if its not populated, then we just default to existing behaviour
|
||||
and calculate the bitmask on the fly.
|
||||
|
||||
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||||
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
||||
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
|
||||
---
|
||||
drivers/clk/qcom/reset.c | 4 ++--
|
||||
drivers/clk/qcom/reset.h | 1 +
|
||||
2 files changed, 3 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/clk/qcom/reset.c
|
||||
+++ b/drivers/clk/qcom/reset.c
|
||||
@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle
|
||||
|
||||
rst = to_qcom_reset_controller(rcdev);
|
||||
map = &rst->reset_map[id];
|
||||
- mask = BIT(map->bit);
|
||||
+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
|
||||
|
||||
return regmap_update_bits(rst->regmap, map->reg, mask, mask);
|
||||
}
|
||||
@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control
|
||||
|
||||
rst = to_qcom_reset_controller(rcdev);
|
||||
map = &rst->reset_map[id];
|
||||
- mask = BIT(map->bit);
|
||||
+ mask = map->bitmask ? map->bitmask : BIT(map->bit);
|
||||
|
||||
return regmap_update_bits(rst->regmap, map->reg, mask, 0);
|
||||
}
|
||||
--- a/drivers/clk/qcom/reset.h
|
||||
+++ b/drivers/clk/qcom/reset.h
|
||||
@@ -12,6 +12,7 @@ struct qcom_reset_map {
|
||||
unsigned int reg;
|
||||
u8 bit;
|
||||
u8 udelay;
|
||||
+ u32 bitmask;
|
||||
};
|
||||
|
||||
struct regmap;
|
||||
@ -16,7 +16,7 @@ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
||||
|
||||
--- a/drivers/pci/controller/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
|
||||
@@ -1745,6 +1745,7 @@ static const struct of_device_id qcom_pc
|
||||
@@ -1762,6 +1762,7 @@ static const struct of_device_id qcom_pc
|
||||
{ .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
|
||||
{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
|
||||
{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
|
||||
|
||||
@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||||
|
||||
--- a/drivers/mmc/core/quirks.h
|
||||
+++ b/drivers/mmc/core/quirks.h
|
||||
@@ -101,6 +101,13 @@ static const struct mmc_fixup __maybe_un
|
||||
@@ -124,6 +124,13 @@ static const struct mmc_fixup __maybe_un
|
||||
MMC_QUIRK_TRIM_BROKEN),
|
||||
|
||||
/*
|
||||
|
||||
@ -22,7 +22,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||||
|
||||
--- a/drivers/mmc/core/quirks.h
|
||||
+++ b/drivers/mmc/core/quirks.h
|
||||
@@ -108,6 +108,13 @@ static const struct mmc_fixup __maybe_un
|
||||
@@ -131,6 +131,13 @@ static const struct mmc_fixup __maybe_un
|
||||
MMC_QUIRK_TRIM_BROKEN),
|
||||
|
||||
/*
|
||||
|
||||
Loading…
Reference in New Issue
Block a user