mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
mediatek: fix Ubiquiti UniFi 6 LR LED
When adding Kernel 5.10 support, the kernel configuration did not
include the LED driver required for the UniFi 6 LR. Also the actual
driver source went missing.
Fixes commit c46ccb69d1 ("mediatek: mt7622: add Linux 5.10 support")
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
a3d431ccf7
commit
fd5ced246a
210
target/linux/mediatek/files-5.10/drivers/leds/leds-ubnt-ledbar.c
Normal file
210
target/linux/mediatek/files-5.10/drivers/leds/leds-ubnt-ledbar.c
Normal file
@ -0,0 +1,210 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
|
||||
/**
|
||||
* Driver for the Ubiquiti RGB LED controller (LEDBAR).
|
||||
* This Controller is based on a Holtek HT32F52241 and connected
|
||||
* via I2C.
|
||||
*
|
||||
* - The Controller needs an enable signal set to high when
|
||||
* performing a transaction. On the U6-LR, this is located
|
||||
* at Pin 18 (R6902)
|
||||
*
|
||||
* - The Pin is also printed when calling the "usetled" function
|
||||
* contained in the ubntapp bootloader application.
|
||||
*/
|
||||
|
||||
#define UBNT_LEDBAR_MAX_BRIGHTNESS 0xff
|
||||
|
||||
#define UBNT_LEDBAR_TRANSACTION_LENGTH 8
|
||||
#define UBNT_LEDBAR_TRANSACTION_SUCCESS 0xaa
|
||||
|
||||
#define UBNT_LEDBAR_TRANSACTION_BLUE_IDX 2
|
||||
#define UBNT_LEDBAR_TRANSACTION_GREEN_IDX 3
|
||||
#define UBNT_LEDBAR_TRANSACTION_RED_IDX 4
|
||||
|
||||
struct ubnt_ledbar {
|
||||
struct mutex lock;
|
||||
struct i2c_client *client;
|
||||
struct led_classdev led_red;
|
||||
struct led_classdev led_green;
|
||||
struct led_classdev led_blue;
|
||||
struct gpio_desc *enable_gpio;
|
||||
};
|
||||
|
||||
static int ubnt_ledbar_perform_transaction(struct ubnt_ledbar *ledbar,
|
||||
char *transaction)
|
||||
{
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < UBNT_LEDBAR_TRANSACTION_LENGTH; i++)
|
||||
i2c_smbus_write_byte(ledbar->client, transaction[i]);
|
||||
|
||||
return i2c_smbus_read_byte(ledbar->client);
|
||||
}
|
||||
|
||||
static int ubnt_ledbar_apply_state(struct ubnt_ledbar *ledbar)
|
||||
{
|
||||
char setup_msg[UBNT_LEDBAR_TRANSACTION_LENGTH] = {0x40, 0x10, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x11};
|
||||
char led_msg[UBNT_LEDBAR_TRANSACTION_LENGTH] = {0x40, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00};
|
||||
char i2c_response;
|
||||
int ret = 0;
|
||||
|
||||
mutex_lock(&ledbar->lock);
|
||||
|
||||
led_msg[UBNT_LEDBAR_TRANSACTION_BLUE_IDX] = ledbar->led_blue.brightness;
|
||||
led_msg[UBNT_LEDBAR_TRANSACTION_GREEN_IDX] = ledbar->led_green.brightness;
|
||||
led_msg[UBNT_LEDBAR_TRANSACTION_RED_IDX] = ledbar->led_red.brightness;
|
||||
|
||||
gpiod_set_raw_value(ledbar->enable_gpio, 1);
|
||||
|
||||
msleep(10);
|
||||
|
||||
i2c_response = ubnt_ledbar_perform_transaction(ledbar, setup_msg);
|
||||
if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) {
|
||||
dev_err(&ledbar->client->dev, "Error initializing LED transaction: %02x\n", ret);
|
||||
ret = -EINVAL;
|
||||
goto out_gpio;
|
||||
}
|
||||
|
||||
i2c_response = ubnt_ledbar_perform_transaction(ledbar, led_msg);
|
||||
if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) {
|
||||
dev_err(&ledbar->client->dev, "Failed LED transaction: %02x\n", ret);
|
||||
ret = -EINVAL;
|
||||
goto out_gpio;
|
||||
}
|
||||
|
||||
msleep(10);
|
||||
out_gpio:
|
||||
gpiod_set_raw_value(ledbar->enable_gpio, 0);
|
||||
|
||||
mutex_unlock(&ledbar->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define UBNT_LEDBAR_CONTROL_RGBS(name) \
|
||||
static int ubnt_ledbar_set_##name##_brightness(struct led_classdev *led_cdev,\
|
||||
enum led_brightness value) \
|
||||
{ \
|
||||
struct ubnt_ledbar *ledbar = \
|
||||
container_of(led_cdev, struct ubnt_ledbar, led_##name); \
|
||||
int ret; \
|
||||
led_cdev->brightness = value; \
|
||||
ret = ubnt_ledbar_apply_state(ledbar); \
|
||||
return ret; \
|
||||
}
|
||||
|
||||
UBNT_LEDBAR_CONTROL_RGBS(red);
|
||||
UBNT_LEDBAR_CONTROL_RGBS(green);
|
||||
UBNT_LEDBAR_CONTROL_RGBS(blue);
|
||||
|
||||
|
||||
static int ubnt_ledbar_init_led(struct device_node *np, struct ubnt_ledbar *ledbar,
|
||||
struct led_classdev *led_cdev)
|
||||
{
|
||||
struct led_init_data init_data = {};
|
||||
int ret;
|
||||
|
||||
if (!np)
|
||||
return 0;
|
||||
|
||||
init_data.fwnode = of_fwnode_handle(np);
|
||||
|
||||
led_cdev->max_brightness = UBNT_LEDBAR_MAX_BRIGHTNESS;
|
||||
|
||||
ret = devm_led_classdev_register_ext(&ledbar->client->dev, led_cdev,
|
||||
&init_data);
|
||||
if (ret)
|
||||
dev_err(&ledbar->client->dev, "led register err: %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
static int ubnt_ledbar_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device_node *np = client->dev.of_node;
|
||||
struct ubnt_ledbar *ledbar;
|
||||
int ret;
|
||||
|
||||
ledbar = devm_kzalloc(&client->dev, sizeof(*ledbar), GFP_KERNEL);
|
||||
if (!ledbar)
|
||||
return -ENOMEM;
|
||||
|
||||
ledbar->enable_gpio = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW);
|
||||
|
||||
if (IS_ERR(ledbar->enable_gpio)) {
|
||||
ret = PTR_ERR(ledbar->enable_gpio);
|
||||
dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
gpiod_direction_output(ledbar->enable_gpio, 0);
|
||||
|
||||
ledbar->client = client;
|
||||
|
||||
mutex_init(&ledbar->lock);
|
||||
|
||||
i2c_set_clientdata(client, ledbar);
|
||||
|
||||
ledbar->led_red.brightness_set_blocking = ubnt_ledbar_set_red_brightness;
|
||||
ubnt_ledbar_init_led(of_get_child_by_name(np, "red"), ledbar, &ledbar->led_red);
|
||||
|
||||
ledbar->led_green.brightness_set_blocking = ubnt_ledbar_set_green_brightness;
|
||||
ubnt_ledbar_init_led(of_get_child_by_name(np, "green"), ledbar, &ledbar->led_green);
|
||||
|
||||
ledbar->led_blue.brightness_set_blocking = ubnt_ledbar_set_blue_brightness;
|
||||
ubnt_ledbar_init_led(of_get_child_by_name(np, "blue"), ledbar, &ledbar->led_blue);
|
||||
|
||||
return ubnt_ledbar_apply_state(ledbar);
|
||||
}
|
||||
|
||||
static int ubnt_ledbar_remove(struct i2c_client *client)
|
||||
{
|
||||
struct ubnt_ledbar *ledbar = i2c_get_clientdata(client);
|
||||
|
||||
mutex_destroy(&ledbar->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ubnt_ledbar_id[] = {
|
||||
{ "ubnt-ledbar", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ubnt_ledbar_id);
|
||||
|
||||
static const struct of_device_id of_ubnt_ledbar_match[] = {
|
||||
{ .compatible = "ubnt,ledbar", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, of_ubnt_ledbar_match);
|
||||
|
||||
static struct i2c_driver ubnt_ledbar_driver = {
|
||||
.driver = {
|
||||
.name = "ubnt-ledbar",
|
||||
.of_match_table = of_ubnt_ledbar_match,
|
||||
},
|
||||
.probe = ubnt_ledbar_probe,
|
||||
.remove = ubnt_ledbar_remove,
|
||||
.id_table = ubnt_ledbar_id,
|
||||
};
|
||||
module_i2c_driver(ubnt_ledbar_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Ubiquiti LEDBAR driver");
|
||||
MODULE_AUTHOR("David Bauer <mail@david-bauer.net>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
@ -203,6 +203,10 @@ CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HOLES_IN_ZONE=y
|
||||
CONFIG_HZ=250
|
||||
CONFIG_HZ_250=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MT65XX=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_IKCONFIG=y
|
||||
@ -217,6 +221,7 @@ CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_JUMP_LABEL=y
|
||||
CONFIG_LEDS_UBNT_LEDBAR=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LLD_VERSION=0
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
|
||||
Loading…
Reference in New Issue
Block a user