ramips: rt305x: add initial support for Tenda W306R V2.0

More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
This commit is contained in:
Gabor Juhos 2012-04-21 12:30:40 +00:00
parent 88b5827c52
commit fc88a363c0
14 changed files with 120 additions and 0 deletions
target/linux/ramips
base-files
etc
diag.sh
hotplug.d/firmware
uci-defaults
lib
files/arch/mips
include/asm/mach-ralink
ralink/rt305x
image
rt305x

View File

@ -81,6 +81,9 @@ get_status_led() {
v22rw-2x2) v22rw-2x2)
status_led="v22rw-2x2:green:security" status_led="v22rw-2x2:green:security"
;; ;;
w306r-v20)
status_led="w306r:green:sys"
;;
w502u) w502u)
status_led="alfa:blue:wps" status_led="alfa:blue:wps"
;; ;;

View File

@ -65,6 +65,7 @@ case "$FIRMWARE" in
sl-r7205 | \ sl-r7205 | \
v11st-fe | \ v11st-fe | \
v22rw-2x2 | \ v22rw-2x2 | \
w306r-v20 | \
w502u | \ w502u | \
wcr-150gn | \ wcr-150gn | \
whr-g300n | \ whr-g300n | \

View File

@ -66,6 +66,9 @@ case $board in
v11st-fe) v11st-fe)
set_wifi_led "rt2800pci-phy0::radio" set_wifi_led "rt2800pci-phy0::radio"
;; ;;
w306r-v20)
set_wifi_led "rt2800pci-phy0::radio"
;;
w502u) w502u)
set_usb_led "alfa:blue:usb" set_usb_led "alfa:blue:usb"
set_wifi_led "rt2800pci-phy0::radio" set_wifi_led "rt2800pci-phy0::radio"

View File

@ -55,6 +55,7 @@ ramips_setup_interfaces()
;; ;;
freestation5 | \ freestation5 | \
w306r-v20 | \
wcr-150gn) wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;; ;;
@ -96,6 +97,11 @@ ramips_setup_macs()
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;; ;;
w306r-v20)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
;;
dir-300-b1 |\ dir-300-b1 |\
dir-300-b2 |\ dir-300-b2 |\
dir-600-b1) dir-600-b1)

View File

@ -28,6 +28,7 @@ preinit_set_mac_address() {
hw550-3g |\ hw550-3g |\
nbg-419n |\ nbg-419n |\
omni-emb |\ omni-emb |\
w306r-v20 |\
w502u |\ w502u |\
wl-330n |\ wl-330n |\
wr6202 |\ wr6202 |\

View File

@ -134,6 +134,9 @@ ramips_board_name() {
*"Sitecom WL-351 v1 002") *"Sitecom WL-351 v1 002")
name="wl-351" name="wl-351"
;; ;;
*"Tenda W306R V2.0")
name="w306r-v20"
;;
*"Ralink V11ST-FE") *"Ralink V11ST-FE")
name="v11st-fe" name="v11st-fe"
;; ;;

View File

@ -32,6 +32,7 @@ platform_check_image() {
rt-n15 | \ rt-n15 | \
rt-n56u | \ rt-n56u | \
sl-r7205 | \ sl-r7205 | \
w306r-v20 |\
w502u |\ w502u |\
wr6202 |\ wr6202 |\
v22rw-2x2 | \ v22rw-2x2 | \

View File

@ -45,6 +45,7 @@ enum ramips_mach_type {
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */
RAMIPS_MACH_W502U, /* ALFA Networks W502U */ RAMIPS_MACH_W502U, /* ALFA Networks W502U */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */

View File

@ -104,6 +104,11 @@ config RT305X_MACH_V22RW_2X2
select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_W306R_V20
bool "Tenda W306R V2.0 board support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_WL341V3 config RT305X_MACH_WL341V3
bool "Sitecom WL-341 v3 board support" bool "Sitecom WL-341 v3 board support"
select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_BUTTONS

View File

@ -29,6 +29,7 @@ obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o
obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o

View File

@ -0,0 +1,72 @@
/*
* Tenda W306R V2.0 board support
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include <asm/mach-ralink/ramips_eth_platform.h>
#include "devices.h"
#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */
#define W306R_V20_GPIO_LED_WPS 13
#define W306R_V20_GPIO_BUTTON_RESET 10
#define W306R_V20_KEYS_POLL_INTERVAL 20
#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL)
static struct gpio_led w306r_v20_leds_gpio[] __initdata = {
{
.name = "w306r-v20:green:sys",
.gpio = W306R_V20_GPIO_LED_SYS,
.active_low = 1,
}, {
.name = "w306r-v20:green:wps",
.gpio = W306R_V20_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = {
{
.desc = "RESET/WPS",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL,
.gpio = W306R_V20_GPIO_BUTTON_RESET,
.active_low = 1,
}
};
static void __init w306r_v20_init(void)
{
rt305x_register_flash(0);
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio),
w306r_v20_leds_gpio);
ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL,
ARRAY_SIZE(w306r_v20_gpio_buttons),
w306r_v20_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0",
w306r_v20_init);

View File

@ -371,6 +371,10 @@ define Image/Build/Profile/V22RW2X2
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys) $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
endef endef
define Image/Build/Profile/W306R_V20
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
endef
define Image/Build/Profile/W502U define Image/Build/Profile/W502U
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys) $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
endef endef
@ -428,6 +432,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/RTG32B1,$(1)) $(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/SLR7205,$(1)) $(call Image/Build/Profile/SLR7205,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WHRG300N,$(1))

View File

@ -111,6 +111,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_RT_N10_PLUS=y CONFIG_RT305X_MACH_RT_N10_PLUS=y
CONFIG_RT305X_MACH_SL_R7205=y CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W306R_V20=y
CONFIG_RT305X_MACH_W502U=y CONFIG_RT305X_MACH_W502U=y
CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WCR150GN=y
CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_RT305X_MACH_WHR_G300N=y

View File

@ -0,0 +1,17 @@
#
# Copyright (C) 2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/W306R_V20
NAME:=Tenda W306R V2.0
PACKAGES:=
endef
define Profile/W306R_V20/Description
Package set for Tenda W306R V2.0 board
endef
$(eval $(call Profile,W306R_V20))