ipq807x: add Arcadyan AW1000 support

Hardware specification:
  SoC: Qualcomm IPQ8072A
  Flash: Toshiba NAND 1GiB
  RAM: 1 GiB of DDR3 466 MHz
  Ethernet: 4x 1Gbps + 1x 2.5Gbps
  WiFi1: QCN5024 2.4GHz ax 4x4
  WiFi2: QCN5054 5GHz ax 4x4
  Button: WiFi, WPS, Reset
  Modem: RG500Q-EA
  USB: 1 x USB 3.0
  Power: DC 12V 4A

Flash instructions:
  1. Download the initramfs image, rename it to
     initramfs.bin, and host it with tftp server.
  2. Interrupt U-Boot and run these commands:
     tftpboot initramfs.bin
     bootm
  3. After openwrt boots up, use scp or luci web
     to upload sysupgrade.bin to upgrade.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Chukun Pan 2023-08-25 23:10:35 +08:00 committed by Christian Marangi
parent ab6a029573
commit fbcda3616e
No known key found for this signature in database
GPG Key ID: AC001D09ADBFEAD7
8 changed files with 393 additions and 8 deletions
package/firmware/ipq-wifi
target/linux/qualcommax
files/arch/arm64/boot/dts/qcom
image
ipq807x/base-files
etc
board.d
hotplug.d
lib/upgrade

View File

@ -28,6 +28,7 @@ endef
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:= \
arcadyan_aw1000 \
buffalo_wxr-5950ax12 \
compex_wpq873 \
dynalink_dl-wrx36 \
@ -136,6 +137,7 @@ endef
# Board files should follow this name structure:
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))

View File

@ -0,0 +1,345 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2023, Chukun Pan <amadeus@jmu.edu.cn> */
/dts-v1/;
#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Arcadyan AW1000";
compatible = "arcadyan,aw1000", "qcom,ipq8074";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
serial0 = &blsp1_uart5;
/*
* Aliases as required by u-boot
* to patch MAC addresses
*/
ethernet0 = &dp1;
ethernet1 = &dp2;
ethernet2 = &dp3;
ethernet3 = &dp4;
ethernet4 = &dp6_syn;
label-mac-device = &dp1;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " root=/dev/ubiblock0_1";
};
gpio-export {
compatible = "gpio-export";
lte-pwrkey {
gpio-export,name = "lte_pwrkey";
gpio-export,output = <1>;
gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
};
lte-power {
gpio-export,name = "lte_power";
gpio-export,output = <1>;
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
};
lte-reset {
gpio-export,name = "lte_reset";
gpio-export,output = <1>;
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
};
usb-vbus {
gpio-export,name = "usb_vbus";
gpio-export,output = <0>;
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
linux,code = <KEY_WLAN>;
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
};
};
led-spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
led_gpio: led-gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <2>;
spi-max-frequency = <1000000>;
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "green:wifi";
gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
};
internet {
label = "green:internet";
gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
};
5g-red {
label = "red:5g";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
5g-green {
label = "green:5g";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
5g-blue {
label = "blue:5g";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
signal-red {
label = "red:signal";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
signal-green {
label = "green:signal";
gpios = <&led_gpio 8 GPIO_ACTIVE_LOW>;
};
signal-blue {
label = "blue:signal";
gpios = <&led_gpio 9 GPIO_ACTIVE_LOW>;
};
phone {
label = "green:phone";
gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
mdio_pins: mdio-pins {
mdc {
pins = "gpio68";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mdio {
pins = "gpio69";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
};
&blsp1_uart5 {
status = "okay";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&prng {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&qpic_nand {
status = "okay";
nand@0 {
reg = <0>;
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
partitions {
compatible = "qcom,smem-part";
};
};
};
&qusb_phy_0 {
status = "okay";
};
&qusb_phy_1 {
status = "okay";
};
&ssphy_0 {
status = "okay";
};
&ssphy_1 {
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
qca8075_0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
qca8075_1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
qca8075_2: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
};
qca8075_3: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
};
qca8081: ethernet-phy@28 {
compatible = "ethernet-phy-id004d.d101";
reg = <28>;
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
};
};
&switch {
status = "okay";
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@1 {
port_id = <1>;
phy_address = <0>;
};
port@2 {
port_id = <2>;
phy_address = <1>;
};
port@3 {
port_id = <3>;
phy_address = <2>;
};
port@4 {
port_id = <4>;
phy_address = <3>;
};
port@6 {
port_id = <6>;
phy_address = <28>;
port_mac_sel = "QGMAC_PORT";
};
};
};
&edma {
status = "okay";
};
&dp1 {
status = "okay";
phy-handle = <&qca8075_0>;
label = "lan1";
};
&dp2 {
status = "okay";
phy-handle = <&qca8075_1>;
label = "lan2";
};
&dp3 {
status = "okay";
phy-handle = <&qca8075_2>;
label = "lan3";
};
&dp4 {
status = "okay";
phy-handle = <&qca8075_3>;
label = "lan4";
};
&dp6_syn {
status = "okay";
phy-handle = <&qca8081>;
label = "wan";
};
&wifi {
status = "okay";
qcom,ath11k-calibration-variant = "Arcadyan-AW1000";
};

View File

@ -33,6 +33,20 @@ define Build/wax6xx-netgear-tar
rm -rf $@.tmp
endef
define Device/arcadyan_aw1000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AW1000
BLOCKSIZE := 256k
PAGESIZE := 4096
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES := ipq-wifi-arcadyan_aw1000 kmod-spi-gpio \
kmod-gpio-nxp-74hc164 kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += arcadyan_aw1000
define Device/buffalo_wxr-5950ax12
$(call Device/FitImage)
DEVICE_VENDOR := Buffalo

View File

@ -6,6 +6,10 @@ board_config_update
board=$(board_name)
case "$board" in
arcadyan,aw1000)
ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
;;
edgecore,eap102)
ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
;;

View File

@ -11,6 +11,7 @@ ipq807x_setup_interfaces()
local board="$1"
case "$board" in
arcadyan,aw1000|\
buffalo,wxr-5950ax12|\
dynalink,dl-wrx36|\
xiaomi,ax9000)

View File

@ -9,6 +9,7 @@ board=$(board_name)
case "$FIRMWARE" in
"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
case "$board" in
arcadyan,aw1000|\
buffalo,wxr-5950ax12|\
compex,wpq873|\
dynalink,dl-wrx36|\

View File

@ -0,0 +1,17 @@
[ "$ACTION" == "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/functions.sh
. /lib/functions/system.sh
board=$(board_name)
case "$board" in
arcadyan,aw1000)
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
;;
esac

View File

@ -43,14 +43,7 @@ platform_pre_upgrade() {
platform_do_upgrade() {
case "$(board_name)" in
buffalo,wxr-5950ax12)
CI_KERN_UBIPART="rootfs"
CI_ROOT_UBIPART="user_property"
buffalo_upgrade_prepare
nand_do_flash_file "$1" || nand_do_upgrade_failed
nand_do_restore_config || nand_do_upgrade_failed
buffalo_upgrade_optvol
;;
arcadyan,aw1000|\
compex,wpq873|\
dynalink,dl-wrx36|\
edimax,cax1800|\
@ -60,6 +53,14 @@ platform_do_upgrade() {
netgear,wax630)
nand_do_upgrade "$1"
;;
buffalo,wxr-5950ax12)
CI_KERN_UBIPART="rootfs"
CI_ROOT_UBIPART="user_property"
buffalo_upgrade_prepare
nand_do_flash_file "$1" || nand_do_upgrade_failed
nand_do_restore_config || nand_do_upgrade_failed
buffalo_upgrade_optvol
;;
edgecore,eap102)
active="$(fw_printenv -n active)"
if [ "$active" -eq "1" ]; then