mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
ramips: add support for Edimax BR-6478AC v2
Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
This commit is contained in:
Daniel Gimpelevich
John Crispin
parent
ad5c2897ec
commit
f72fa883b3
@ -86,6 +86,12 @@ asl26555-16M)
|
||||
bc2)
|
||||
set_usb_led "$boardname:blue:usb"
|
||||
;;
|
||||
br-6478ac-v2)
|
||||
ucidef_set_led_default "power" "POWER" "$boardname:white:power" "1"
|
||||
ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
|
||||
set_wifi_led "$boardname:blue:wlan"
|
||||
set_usb_led "$boardname:blue:usb"
|
||||
;;
|
||||
broadway)
|
||||
set_usb_led "$boardname:red:diskmounted"
|
||||
set_wifi_led "$boardname:red:wps_active"
|
||||
|
||||
@ -341,6 +341,7 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
||||
;;
|
||||
br-6478ac-v2|\
|
||||
tplink,c2-v1)
|
||||
ucidef_add_switch "switch1" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
||||
@ -446,6 +447,10 @@ ramips_setup_macs()
|
||||
lan_mac=$(cat /sys/class/net/eth0/address)
|
||||
wan_mac=$(mtd_get_mac_binary devdata 7)
|
||||
;;
|
||||
br-6478ac-v2)
|
||||
lan_mac=$(cat /sys/class/net/eth0/address)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 2)
|
||||
;;
|
||||
cy-swr1100|\
|
||||
dch-m225)
|
||||
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
||||
|
||||
@ -82,6 +82,9 @@ ramips_board_detect() {
|
||||
*"BR-6475nD")
|
||||
name="br-6475nd"
|
||||
;;
|
||||
*"BR-6478AC v2")
|
||||
name="br-6478ac-v2"
|
||||
;;
|
||||
*"Broadway")
|
||||
name="broadway"
|
||||
;;
|
||||
|
||||
@ -239,7 +239,8 @@ platform_check_image() {
|
||||
;;
|
||||
3g-6200n|\
|
||||
3g-6200nl|\
|
||||
br-6475nd)
|
||||
br-6475nd|\
|
||||
br-6478ac-v2)
|
||||
[ "$magic" != "43535953" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
|
||||
215
target/linux/ramips/dts/BR-6478AC-V2.dts
Normal file
215
target/linux/ramips/dts/BR-6478AC-V2.dts
Normal file
@ -0,0 +1,215 @@
|
||||
/*
|
||||
* Device Tree file for the Edimax BR-6478AC V2
|
||||
* based on Linksys E1700
|
||||
*
|
||||
* Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com>
|
||||
* Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com>
|
||||
* Copyright (C) 2017 James McKenzie <openwrt@madingley.org>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc";
|
||||
model = "Edimax BR-6478AC v2";
|
||||
|
||||
aliases {
|
||||
led-status = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset_wps {
|
||||
label = "reset_wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "br-6478ac-v2:white:power";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wan {
|
||||
label = "br-6478ac-v2:blue:wan";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wlan {
|
||||
label = "br-6478ac-v2:blue:wlan";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
usb {
|
||||
label = "br-6478ac-v2:blue:usb";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
usb-power {
|
||||
gpio-export,name="usb-power";
|
||||
gpio-export,output=<1>;
|
||||
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* pin45 */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0 0>;
|
||||
linux,modalias = "m25p80", "mx25l6405d";
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "cimage";
|
||||
reg = <0x50000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
label = "firmware";
|
||||
reg = <0x00070000 0x00790000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "uartf", "wdt", "pa",
|
||||
"ephy", "nd_sd", "wled";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
|
||||
mediatek,portmap = "wllll";
|
||||
|
||||
port@5 {
|
||||
status = "okay";
|
||||
mediatek,fixed-link = <1000 1 1 1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
mdio-bus {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy3: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
phy1f: ethernet-phy@1f {
|
||||
reg = <0x1f>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsw {
|
||||
mediatek,port4 = "gmac";
|
||||
mediatek,mt7530 = <1>;
|
||||
};
|
||||
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
pcie-bridge {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
mediatek,2ghz = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -475,6 +475,18 @@ define Device/tiny-ac
|
||||
endef
|
||||
TARGET_DEVICES += tiny-ac
|
||||
|
||||
define Device/br-6478ac-v2
|
||||
DTS := BR-6478AC-V2
|
||||
DEVICE_TITLE := Edimax BR-6478AC V2
|
||||
BLOCKSIZE := 64k
|
||||
IMAGE_SIZE := 7616k
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
||||
edimax-header -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
||||
append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_PACKAGES := kmod-mt76
|
||||
endef
|
||||
TARGET_DEVICES += br-6478ac-v2
|
||||
|
||||
define Device/tplink_c2-v1
|
||||
$(Device/Archer)
|
||||
DTS := ArcherC2-v1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user