mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
ramips: add support for Cudy M1800
Specifications
SoC: MT7621
CPU: 880 MHz
Flash: 32 MiB
RAM: 256 MiB
WLAN: MT7915 WiFi 6 (2.4/5 GHz)
Ethernet: 2x Gbit ports
MAC
LAN b4:4b:d6:2e:c7:b0 (label)
WAN b4:4b:d6:2e:c7:b1
WiFi 2.4 00:0c:43:26:46:08
WiFi 5 00:0c:43:26:59:97
Installation
There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.
Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
This commit is contained in:
Leon M. Busch-George
Hauke Mehrtens
parent
ed7c1a504e
commit
f6d394e9f2
177
target/linux/ramips/dts/mt7621_cudy_m1800.dts
Normal file
177
target/linux/ramips/dts/mt7621_cudy_m1800.dts
Normal file
@ -0,0 +1,177 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "cudy,m1800", "mediatek,mt7621-soc";
|
||||
model = "Cudy M1800";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_internet_white;
|
||||
led-failsafe = &led_internet_white;
|
||||
led-running = &led_internet_white;
|
||||
led-upgrade = &led_internet_white;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_internet_white: internet-white {
|
||||
label = "white:internet";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
internet-red {
|
||||
label = "red:internet";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "lan";
|
||||
phy-handle = <ðphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
mediatek,disable-radar-background;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
broken-flash-reset;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "app";
|
||||
reg = <0x1000000 0xfd0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fd0000 {
|
||||
label = "debug";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "backup";
|
||||
reg = <0x1fe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ff0000 {
|
||||
label = "bdinfo";
|
||||
reg = <0x1ff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
reg = <0xde00 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "jtag", "uart3";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -426,6 +426,16 @@ define Device/bolt_arion
|
||||
endef
|
||||
TARGET_DEVICES += bolt_arion
|
||||
|
||||
define Device/cudy_m1800
|
||||
$(Device/dsa-migration)
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := M1800
|
||||
IMAGE_SIZE := 16064k
|
||||
UIMAGE_NAME := R17
|
||||
DEVICE_PACKAGES := kmod-mt7915e
|
||||
endef
|
||||
TARGET_DEVICES += cudy_m1800
|
||||
|
||||
define Device/cudy_wr1300-v1
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 15872k
|
||||
|
||||
@ -78,6 +78,11 @@ ramips_setup_interfaces()
|
||||
uci add_list firewall.@zone[1].network='eth_data'
|
||||
uci add_list firewall.@zone[1].network='eth_om'
|
||||
;;
|
||||
cudy,m1800|\
|
||||
yuncore,ax820|\
|
||||
zyxel,nt7101)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
gnubee,gb-pc1)
|
||||
ucidef_set_interface_lan "ethblack ethblue"
|
||||
;;
|
||||
@ -117,10 +122,6 @@ ramips_setup_interfaces()
|
||||
ubnt,usw-flex)
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
|
||||
;;
|
||||
yuncore,ax820|\
|
||||
zyxel,nr7101)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
zyxel,wap6805)
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user