kernel: bump 4.14 to 4.14.125

Refreshed all patches.

Altered patches:
- 403-net-mvneta-convert-to-phylink.patch
- 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch

Compile-tested on: cns3xxx, imx6, mvebu
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
This commit is contained in:
Koen Vandeputte 2019-06-11 15:49:53 +02:00
parent 40b1e899ba
commit f63a1caf22
11 changed files with 34 additions and 33 deletions

View File

@ -3,10 +3,10 @@
LINUX_RELEASE?=1
LINUX_VERSION-4.9 = .181
LINUX_VERSION-4.14 = .123
LINUX_VERSION-4.14 = .125
LINUX_KERNEL_HASH-4.9.181 = 8fcd223e11cba322801bc38cdb8b581d64c0115f585dcb6604de8561b574fced
LINUX_KERNEL_HASH-4.14.123 = 25f58cb56bde388ac9bcee984f5f2d0ca094b0a8af6b92ad1f5b2fd0e6725b85
LINUX_KERNEL_HASH-4.14.125 = 3e3dbc20215a28385bf46e2d0b8d9019df38ef1ee677e5e8870c7c3cde2ab318
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

View File

@ -24,7 +24,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -372,10 +372,14 @@ static int xhci_try_enable_msi(struct us
@@ -370,10 +370,14 @@ static int xhci_try_enable_msi(struct us
free_irq(hcd->irq, hcd);
hcd->irq = 0;

View File

@ -40,7 +40,7 @@ it on BCM4708 family.
/* called during probe() after chip reset completes */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -168,6 +168,49 @@ int xhci_start(struct xhci_hcd *xhci)
@@ -166,6 +166,49 @@ int xhci_start(struct xhci_hcd *xhci)
return ret;
}
@ -90,7 +90,7 @@ it on BCM4708 family.
/*
* Reset a halted HC.
*
@@ -551,10 +594,20 @@ static int xhci_init(struct usb_hcd *hcd
@@ -549,10 +592,20 @@ static int xhci_init(struct usb_hcd *hcd
static int xhci_run_finished(struct xhci_hcd *xhci)
{
@ -114,7 +114,7 @@ it on BCM4708 family.
xhci->shared_hcd->state = HC_STATE_RUNNING;
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
@@ -564,6 +617,10 @@ static int xhci_run_finished(struct xhci
@@ -562,6 +615,10 @@ static int xhci_run_finished(struct xhci
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB3 roothub");
return 0;

View File

@ -112,7 +112,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ret = PTR_ERR(hcd->usb_phy);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -612,11 +612,7 @@ int xhci_run(struct usb_hcd *hcd)
@@ -610,11 +610,7 @@ int xhci_run(struct usb_hcd *hcd)
"// Set the interrupt modulation register");
temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;

View File

@ -10,7 +10,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -248,6 +248,184 @@ static unsigned int sfp_check(void *buf,
@@ -264,6 +264,184 @@ static unsigned int sfp_check(void *buf,
return check;
}
@ -195,7 +195,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/* Helpers */
static void sfp_module_tx_disable(struct sfp *sfp)
{
@@ -416,6 +594,7 @@ static int sfp_sm_mod_probe(struct sfp *
@@ -432,6 +610,7 @@ static int sfp_sm_mod_probe(struct sfp *
char sn[17];
char date[9];
char rev[5];
@ -203,7 +203,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
u8 check;
int err;
@@ -459,10 +638,83 @@ static int sfp_sm_mod_probe(struct sfp *
@@ -475,10 +654,83 @@ static int sfp_sm_mod_probe(struct sfp *
rev[4] = '\0';
memcpy(sn, sfp->id.ext.vendor_sn, 16);
sn[16] = '\0';

View File

@ -928,10 +928,10 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
return 0;
err_netdev:
@@ -4386,16 +4492,14 @@ err_netdev:
@@ -4384,16 +4490,14 @@ err_netdev:
mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
1 << pp->id);
}
err_free_stats:
+ if (pp->phylink)
+ phylink_destroy(pp->phylink);
free_percpu(pp->stats);
@ -947,7 +947,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
@@ -4407,7 +4511,6 @@ err_free_netdev:
@@ -4405,7 +4509,6 @@ err_free_netdev:
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
@ -955,7 +955,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
@@ -4415,10 +4518,8 @@ static int mvneta_remove(struct platform
@@ -4413,10 +4516,8 @@ static int mvneta_remove(struct platform
clk_disable_unprepare(pp->clk);
free_percpu(pp->ports);
free_percpu(pp->stats);
@ -967,7 +967,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
free_netdev(dev);
if (pp->bm_priv) {
@@ -4470,9 +4571,6 @@ static int mvneta_resume(struct device *
@@ -4468,9 +4569,6 @@ static int mvneta_resume(struct device *
return err;
}

View File

@ -159,7 +159,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sched/signal.h>
@@ -2201,6 +2202,9 @@ static int __ethtool_get_module_info(str
@@ -2212,6 +2213,9 @@ static int __ethtool_get_module_info(str
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
@ -169,7 +169,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
if (phydev && phydev->drv && phydev->drv->module_info)
return phydev->drv->module_info(phydev, modinfo);
@@ -2235,6 +2239,9 @@ static int __ethtool_get_module_eeprom(s
@@ -2246,6 +2250,9 @@ static int __ethtool_get_module_eeprom(s
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;

View File

@ -25,8 +25,8 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+#include <linux/sfp.h>
enum {
MV_PCS_BASE_T = 0x0000,
@@ -38,6 +40,11 @@ enum {
MV_PMA_BOOT = 0xc050,
@@ -41,6 +43,11 @@ enum {
MV_AN_RESULT_SPD_10000 = BIT(15),
};
@ -38,7 +38,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
u16 mask, u16 bits)
{
@@ -56,17 +63,52 @@ static int mv3310_modify(struct phy_devi
@@ -59,8 +66,25 @@ static int mv3310_modify(struct phy_devi
return ret < 0 ? ret : 1;
}
@ -62,10 +62,11 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
{
+ struct mv3310_priv *priv;
u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
int ret;
if (!phydev->is_c45 ||
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
@@ -78,9 +102,27 @@ static int mv3310_probe(struct phy_devic
return -ENODEV;
}
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
@ -91,7 +92,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
/*
* Resetting the MV88X3310 causes it to become non-responsive. Avoid
* setting the reset bit(s).
@@ -78,6 +120,7 @@ static int mv3310_soft_reset(struct phy_
@@ -92,6 +134,7 @@ static int mv3310_soft_reset(struct phy_
static int mv3310_config_init(struct phy_device *phydev)
{
@ -99,7 +100,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
u32 mask;
int val;
@@ -166,6 +209,14 @@ static int mv3310_config_init(struct phy
@@ -180,6 +223,14 @@ static int mv3310_config_init(struct phy
phydev->supported &= mask;
phydev->advertising &= phydev->supported;
@ -114,7 +115,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
return 0;
}
@@ -349,12 +400,13 @@ static struct phy_driver mv3310_drivers[
@@ -363,12 +414,13 @@ static struct phy_driver mv3310_drivers[
SUPPORTED_FIBRE |
SUPPORTED_10000baseT_Full |
SUPPORTED_Backplane,

View File

@ -14,7 +14,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1148,6 +1148,7 @@ static int sfp_remove(struct platform_de
@@ -1164,6 +1164,7 @@ static int sfp_remove(struct platform_de
static const struct of_device_id sfp_of_match[] = {
{ .compatible = "sff,sfp", },

View File

@ -13,7 +13,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -489,7 +489,7 @@ static void sfp_sm_phy_detach(struct sfp
@@ -505,7 +505,7 @@ static void sfp_sm_phy_detach(struct sfp
sfp->mod_phy = NULL;
}
@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
{
struct phy_device *phy;
int err;
@@ -499,11 +499,11 @@ static void sfp_sm_probe_phy(struct sfp
@@ -515,11 +515,11 @@ static void sfp_sm_probe_phy(struct sfp
phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
if (phy == ERR_PTR(-ENODEV)) {
dev_info(sfp->dev, "no PHY detected\n");
@ -36,7 +36,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
err = sfp_add_phy(sfp->sfp_bus, phy);
@@ -511,11 +511,13 @@ static void sfp_sm_probe_phy(struct sfp
@@ -527,11 +527,13 @@ static void sfp_sm_probe_phy(struct sfp
phy_device_remove(phy);
phy_device_free(phy);
dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
@ -51,7 +51,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
static void sfp_sm_link_up(struct sfp *sfp)
@@ -561,14 +563,9 @@ static void sfp_sm_fault(struct sfp *sfp
@@ -577,14 +579,9 @@ static void sfp_sm_fault(struct sfp *sfp
static void sfp_sm_mod_init(struct sfp *sfp)
{
@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
/* Setting the serdes link mode is guesswork: there's no
* field in the EEPROM which indicates what mode should
@@ -582,7 +579,22 @@ static void sfp_sm_mod_init(struct sfp *
@@ -598,7 +595,22 @@ static void sfp_sm_mod_init(struct sfp *
if (sfp->id.base.e1000_base_t ||
sfp->id.base.e100_base_lx ||
sfp->id.base.e100_base_fx)

View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -431,6 +431,9 @@ uart_get_baud_rate(struct uart_port *por
@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por
break;
}