diff --git a/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts b/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts
new file mode 100644
index 00000000000..ca680e4c29f
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7622-dlink-eagle-pro-ai-m32-a1.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link EAGLE PRO AI M32 A1";
+	compatible = "dlink,eagle-pro-ai-m32-a1", "mediatek,mt7622";
+
+	aliases {
+		led-boot = &status_orange;
+		led-failsafe = &status_red;
+		led-running = &status_white;
+		led-upgrade = &status_red;
+		serial0 = &uart0;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_white: status_white {
+			label = "white:status";
+			gpios = <&pio 85 GPIO_ACTIVE_LOW>;
+		};
+
+		status_orange: status_orange {
+			label = "orange:status";
+			gpios = <&pio 20 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		status_red: status_red {
+			label = "red:status";
+			gpios = <&pio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		nvmem-cells = <&macaddr_odm_83>;
+		nvmem-cell-names = "mac-address";
+		phy-mode = "2500base-x";
+		reg = <0>;
+
+		fixed-link {
+			full-duplex;
+			pause;
+			speed = <2500>;
+		};
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&pio>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan1";
+				};
+
+				wan: port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+	status = "okay";
+};
+
+&pio {
+    epa_elna_pins: epa-elna-pins {
+		mux {
+			function = "antsel";
+			groups = "antsel0", "antsel1", "antsel2", "antsel3",
+				  "antsel4", "antsel5", "antsel6", "antsel7",
+      				  "antsel8", "antsel9", "antsel12", "antsel13",
+    				  "antsel14", "antsel15", "antsel16", "antsel17";
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx";
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+	status = "okay";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+&slot0 {
+	wmac1: mt7915@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		mediatek,mtd-eeprom = <&factory 0x05000>;
+	};
+};
+
+&snfi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial_nand_pins>;
+	status = "okay";
+
+	snand: flash@0 {
+		compatible = "spi-nand";
+		mediatek,bmt-table-size = <0x1000>;
+		mediatek,bmt-v2;
+		nand-ecc-engine = <&snfi>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Preloader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "ATF";
+				reg = <0x00080000 0x00040000>;
+				read-only;
+			};
+
+			partition@C0000 {
+				label = "Bootloader";
+				reg = <0x000C0000 0x00080000>;
+				read-only;
+			};
+
+			partition@140000 {
+				label = "BootConfig";
+				reg = <0x00140000 0x00040000>;
+				read-only;
+			};
+
+			odm: partition@180000 {
+				compatible = "nvmem-cells";
+				label = "Odm";
+				reg = <0x00180000 0x00040000>;
+				read-only;
+
+				macaddr_odm_83: macaddr@83 {
+					reg = <0x83 0x6>;
+				};
+			};
+
+			config1: partition@1C0000 {
+				compatible = "nvmem-cells";
+				label = "Config1";
+				reg = <0x001C0000 0x00080000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "Config2";
+				reg = <0x00240000 0x00080000>;
+				read-only;
+			};
+
+			partition@2C0000 {
+				label = "Kernel1";
+				reg = <0x002C0000 0x02D00000>;
+
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "kernel";
+					reg = <0x00000000 0x00800000>;
+				};
+
+				partition@800000 {
+					label = "ubi";
+					reg = <0x00800000 0x02500000>;
+				};
+			};
+
+			partition@2FC0000 {
+				label = "Kernel2";
+				reg = <0x02FC0000 0x02D00000>;
+				read-only;
+			};
+
+			factory: partition@5CC0000 {
+				label = "Factory";
+				reg = <0x05CC0000 0x00100000>;
+				read-only;
+			};
+
+			partition@5DC0000 {
+				label = "Mydlink";
+				reg = <0x05DC0000 0x00200000>;
+				read-only;
+			};
+
+			partition@5FC0000 {
+				label = "Storage";
+				reg = <0x05FC0000 0x00300000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ssusb {
+	status = "disabled";
+};
+
+&u3phy {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&epa_elna_pins>;
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+	status = "okay";
+};
+
diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk
index 50166669e2e..294e23c8552 100644
--- a/target/linux/mediatek/image/mt7622.mk
+++ b/target/linux/mediatek/image/mt7622.mk
@@ -35,6 +35,25 @@ define Build/bl31-uboot
 	cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@
 endef
 
+# Append header to a D-Link M32 Kernel 1 partition
+define Build/m32-recovery-header-kernel1
+	echo -en "DLK6E6010001\x00\x00\xCF\x33" > "$@.header"
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header"
+# Byte 0-3: Erase Start 0x002C0000
+# Byte 4-7: Erase Length 0x02D00000
+# Byte 8-11: Data offset: 0x002C0000
+# Byte 12-15: Data Length: 0x02D00000
+	echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header"
+# Only zeros
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
+# Note: The last 2 bytes of the following line are the checksum of the header
+# If any data in the header will be changed, the checksum must be re-calculated
+	echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E\x68\x61" >> "$@.header"
+	cat "$@.header" "$@" > "$@.new"
+	mv "$@.new" "$@"
+	rm "$@.header"
+endef
+
 define Build/mt7622-gpt
 	cp $@ $@.tmp 2>/dev/null || true
 	ptgen -g -o $@.tmp -a 1 -l 1024 \
@@ -159,6 +178,25 @@ define Device/buffalo_wsr-3200ax4s
 endef
 TARGET_DEVICES += buffalo_wsr-3200ax4s
 
+define Device/dlink_eagle-pro-ai-m32-a1
+  IMAGE_SIZE := 46080k
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := EAGLE PRO AI M32
+  DEVICE_VARIANT := A1
+  DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7915-firmware
+  KERNEL_SIZE := 8192k
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  UBINIZE_OPTS := -E 5
+  IMAGES += tftp.bin recovery.bin
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
+  IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-recovery-header-kernel1
+endef
+TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1
+
 define Device/elecom_wrc-2533gent
   DEVICE_VENDOR := Elecom
   DEVICE_MODEL := WRC-2533GENT
diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
index d1341099bc8..75c5e37be14 100644
--- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
@@ -24,6 +24,9 @@ mediatek_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
+	dlink,eagle-pro-ai-m32-a1)
+		ucidef_set_interfaces_lan_wan "lan1 lan2" wan
+		;;
 	ubnt,unifi-6-lr*)
 		ucidef_set_interface_lan "eth0"
 		;;
@@ -61,6 +64,10 @@ mediatek_setup_macs()
 		wan_mac=$lan_mac
 		label_mac=$lan_mac
 		;;
+	dlink,eagle-pro-ai-m32-a1)
+		wan_mac=$(get_mac_label)
+		lan_mac=$(macaddr_add $(get_mac_label) 1)
+		;;
 	reyee,ax3200-e5|\
 	ruijie,rg-ew3200gx-pro)
 		lan_mac=$(macaddr_add $(get_mac_label) 1)
diff --git a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 7ee9f24071c..e9cc5922375 100644
--- a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -18,6 +18,10 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $basemac 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $basemac 8 > /sys${DEVPATH}/macaddress
 		;;
+	dlink,eagle-pro-ai-m32-a1)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(cat /sys/class/net/eth0/address) 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(cat /sys/class/net/eth0/address) 3 > /sys${DEVPATH}/macaddress
+		;;
 	reyee,ax3200-e5|\
 	ruijie,rg-ew3200gx-pro)
 		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
index ea3176d2d1e..e256d2b5332 100755
--- a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
@@ -34,6 +34,7 @@ platform_do_upgrade() {
 			nand_do_upgrade "$1"
 		fi
 		;;
+	dlink,eagle-pro-ai-m32-a1|\
 	elecom,wrc-x3200gst3|\
 	mediatek,mt7622-rfb1-ubi|\
 	netgear,wax206|\
@@ -72,6 +73,7 @@ platform_check_image() {
 	buffalo,wsr-3200ax4s)
 		buffalo_check_image "$board" "$magic" "$1" || return 1
 		;;
+  	dlink,eagle-pro-ai-m32-a1|\
 	elecom,wrc-x3200gst3|\
 	mediatek,mt7622-rfb1-ubi|\
 	netgear,wax206|\