ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-21 03:55:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

ath79: use internal switch for EAP300 v2

Browse Source 
Have the port use GMAC1 with internal switch
which fixes the issue of the ethernet LED not functioning
The LED is triggered by the internal switch, not a GPIO.

The GPIO for the ethernet LED was added in ath79
as it was defined in the ar71xx target
but it was not functioning in ath79 for a previously unknown reason.

It is unknown why that GPIO was defined as an LED in ar71xx.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
[drop unrelated changes: model property and SPI max frequency]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: maurerr <mariusd84@gmail.com>
This commit is contained in:
Michael Pratt 2021-01-11 03:34:33 -05:00 committed by maurerr
parent ceebe6d8ba
commit f3ff20e0d8
3 changed files with 5 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
target/linux/ath79/dts/ar9341_engenius_eap300-v2.dts
View File

@ -43,11 +43,6 @@
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "blue:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
virtual_flash {
@ -145,21 +140,8 @@
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&eth1 {
compatible = "syscon", "simple-mfd";
mtd-mac-address = <&art 0x0>;
};
&wmac {

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -156,7 +156,6 @@ telco,t1)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
;;
comfast,cf-wr752ac-v1|\
engenius,eap300-v2|\
enterasys,ws-ap3705i|\
openmesh,mr900-v1|\
openmesh,mr900-v2|\

5
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -33,7 +33,6 @@ ath79_setup_interfaces()
dlink,dap-3320-a1|\
dlink,dir-505|\
engenius,eap1200h|\
engenius,eap300-v2|\
engenius,eap600|\
engenius,ecb1200|\
engenius,ecb1750|\
@ -237,6 +236,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
;;
engenius,eap300-v2)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan"
;;
engenius,ens202ext-v1)
ucidef_set_interface_lan "eth1"
ucidef_add_switch "switch0" \