mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-08 11:54:53 +00:00
bmips: add support for Actiontec T1200H
Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 128MB NAND ESMT F59L1G81A - RAM: 128MB DDR3 - Ethernet: 5x 1000M - Wifi: BCM435F - 1x USB 2.0 port - 2x Button - 11x LED - Coax HPNA (unsupported) - RJ11 xDSL (unsupported) Install instructions: The booloader will only install signed firmware so the image has to be manually flashed. - Set up a TFTP server on 192.168.1.0/24 to serve the initramfs image - Interrupt the bootloader and run from RAM with r 192.168.1.100:openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf - On the openwrt console, copy the wfi image using wget/tftp/scp, i.e scp user@192.168.1.100:~/openwrt/bin/targets/bmips/bcm63268/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/ - Erase half the flash partition where openwrt will be installed with flash_erase -j /dev/mtd1 0 491 - Flash the openwrt image with nandwrite -p /dev/mtd1 /tmp/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin - Reboot - Interrupt the bootloader again and use the c command to boot from previous firmware if vendor image is loaded Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Minor improvements to DTS file] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 65b8a978deac05894d1fd20dfe63494f4b43848d)
This commit is contained in:
Kyle Hendry
Álvaro Fernández Rojas
parent
d70709e5fe
commit
f31675b69b
@ -5,6 +5,13 @@
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
actiontec,t1200h |\
|
||||
comtrend,vg-8050 |\
|
||||
sagem,fast-3864-op |\
|
||||
sercomm,shg2500)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
comtrend,vr-3032u |\
|
||||
smartrg,sr505n)
|
||||
ucidef_set_bridge_device switch
|
||||
@ -17,12 +24,6 @@ sercomm,h500-s-vfes)
|
||||
ucidef_set_interface "qtn" device "wifi" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.252"
|
||||
uci add_list firewall.@zone[0].network='qtn'
|
||||
;;
|
||||
comtrend,vg-8050 |\
|
||||
sagem,fast-3864-op |\
|
||||
sercomm,shg2500)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
@ -9,6 +9,7 @@ platform_check_image() {
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
actiontec,t1200h |\
|
||||
comtrend,vg-8050 |\
|
||||
comtrend,vr-3032u |\
|
||||
sagem,fast-3864-op)
|
||||
|
||||
253
target/linux/bmips/dts/bcm63168-actiontec-t1200h.dts
Normal file
253
target/linux/bmips/dts/bcm63168-actiontec-t1200h.dts
Normal file
@ -0,0 +1,253 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm63268.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Actiontec T1200H";
|
||||
compatible = "actiontec,t1200h", "brcm,bcm63168", "brcm,bcm63268";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "red:internet";
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "green:internet";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-9 {
|
||||
function = LED_FUNCTION_USB;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: led-20 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-22 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: led-35 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led-39 {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-43 {
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-44 {
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-46 {
|
||||
label = "green:dsl";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-49 {
|
||||
label = "red:dsl";
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio 49 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cferom_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio_ext {
|
||||
switch@1e {
|
||||
compatible = "brcm,bcm53125";
|
||||
reg = <0x1e>;
|
||||
|
||||
dsa,member = <1 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@8 {
|
||||
reg = <0x8>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
ethernet = <&switch0port6>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nflash {
|
||||
status = "okay";
|
||||
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
reg = <0>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-ecc-strength = <15>;
|
||||
nand-on-flash-bbt;
|
||||
brcm,nand-oob-sector-size = <64>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "cferom";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cferom_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "brcm,wfi-split";
|
||||
label = "wfi";
|
||||
reg = <0x20000 0x7ac0000>;
|
||||
};
|
||||
|
||||
partition@7b00000 {
|
||||
label = "data";
|
||||
reg = <0x7b00000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports {
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "wan";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
};
|
||||
|
||||
switch0port6: port@6 {
|
||||
reg = <6>;
|
||||
label = "extsw";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,5 +1,24 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
define Device/actiontec_t1200h
|
||||
$(Device/bcm63xx-nand)
|
||||
DEVICE_VENDOR := Actiontec
|
||||
DEVICE_MODEL := T1200H
|
||||
CHIP_ID := 63268
|
||||
SOC := bcm63168
|
||||
CFE_RAM_FILE := actiontec,t1200h/cferam.000
|
||||
CFE_RAM_JFFS2_NAME := cferam.000
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SUBPAGESIZE := 512
|
||||
VID_HDR_OFFSET := 2048
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
kmod-leds-gpio
|
||||
CFE_WFI_FLASH_TYPE := 3
|
||||
CFE_WFI_VERSION := 0x5732
|
||||
endef
|
||||
TARGET_DEVICES += actiontec_t1200h
|
||||
|
||||
define Device/comtrend_vg-8050
|
||||
$(Device/bcm63xx-nand)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user