ipq806x: 5.15: remove qcom adm Documentation patch

Remove qcom adm Documentation patch that is not needed for the target.
Probably a leftover when the adm bus was added, now merged upstream.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

target/linux/ipq806x/patches-5.15/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch

@@ -1,71 +0,0 @@
-From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
-From: Thomas Pedersen <twp@codeaurora.org>
-Date: Mon, 16 May 2016 17:58:50 -0700
-Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
-
-Original patch from Andy Gross.
-
-This patch removes the crci information from the dma
-channel property.  At least one client device requires
-using more than one CRCI value for a channel.  This does
-not match the current binding and the crci information
-needs to be removed.
-
-Instead, the client device will provide this information
-via other means.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
----
- Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
- 1 file changed, 6 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
-+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
-@@ -4,8 +4,7 @@ Required properties:
- - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- - reg: Address range for DMA registers
- - interrupts: Should contain one interrupt shared by all channels
--- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
--  denotes CRCI (client rate control interface) flow control assignment.
-+- #dma-cells: must be <1>.  First cell denotes the channel number.
- - clocks: Should contain the core clock and interface clock.
- - clock-names: Must contain "core" for the core clock and "iface" for the
-   interface clock.
-@@ -22,7 +21,7 @@ Example:
- 			compatible = "qcom,adm";
- 			reg = <0x18300000 0x100000>;
- 			interrupts = <0 170 0>;
--			#dma-cells = <2>;
-+			#dma-cells = <1>;
- 
- 			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- 			clock-names = "core", "iface";
-@@ -35,15 +34,12 @@ Example:
- 			qcom,ee = <0>;
- 		};
- 
--DMA clients must use the format descripted in the dma.txt file, using a three
-+DMA clients must use the format descripted in the dma.txt file, using a two
- cell specifier for each channel.
- 
--Each dmas request consists of 3 cells:
-+Each dmas request consists of two cells:
-  1. phandle pointing to the DMA controller
-  2. channel number
-- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
--    The CRCI is used for flow control.  It identifies the peripheral device that
--    is the source/destination for the transferred data.
- 
- Example:
- 
-@@ -55,7 +51,7 @@ Example:
- 
- 		cs-gpios = <&qcom_pinmux 20 0>;
- 
--		dmas = <&adm_dma 6 9>,
--			<&adm_dma 5 10>;
-+		dmas = <&adm_dma 6>,
-+			<&adm_dma 5>;
- 		dma-names = "rx", "tx";
- 	};