ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

kirkwood: remove 6.1 support

Browse Source 
Kirkwood was switched to 6.6. We can remove 6.1 support now.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15998
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Pawel Dembicki 2024-07-24 10:35:28 +02:00 committed by Robert Marko
parent f00d4caa37
commit f142ce87d9
26 changed files with 0 additions and 2117 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

309
target/linux/kirkwood/config-6.1
View File

@ -1,309 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4 is not set
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ARMADA_THERMAL is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_ARM_HAS_GROUP_RELOCS=y
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_THUMB is not set
CONFIG_ARM_UNWIND=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_LEDS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PM=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_MARVELL=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_8250_SHIFT=2
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xfed12000
CONFIG_DMA_OPS=y
CONFIG_DNOTIFY=y
CONFIG_DTC=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FORCE_PCI=y
CONFIG_FWNODE_MDIO=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_MVEBU=y
CONFIG_GRO_CELLS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HWMON=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_PXA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQSTACKS=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KIRKWOOD_CLK=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_NS2=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_MVEBU_ANY=y
CONFIG_MANGLE_BOOTARGS=y
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MEMFD_CREATE=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_MARVELL is not set
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MV643XX_ETH=y
CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_ORION_IRQCHIP=y
CONFIG_ORION_TIMER=y
CONFIG_ORION_WATCHDOG=y
CONFIG_OUTER_CACHE=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PAGE_POOL=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PCI=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MVEBU=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_MVEBU_SATA=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_KIRKWOOD=y
CONFIG_PINCTRL_MVEBU=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PLAT_ORION=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_LINKSTATION=y
CONFIG_POWER_SUPPLY=y
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_RANDSTRUCT_NONE=y
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_SCSI=y
CONFIG_SCSI_COMMON=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SGL_ALLOC=y
CONFIG_SG_POOL=y
CONFIG_SOC_BUS=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_ORION=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
# CONFIG_VFP is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XXHASH=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y

2
target/linux/kirkwood/image/Makefile
View File

@ -112,9 +112,7 @@ endef
define Device/Default
PROFILES := Default
ifdef CONFIG_LINUX_6_6
DEVICE_DTS_DIR := $(DTS_DIR)/marvell
endif
DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL := kernel-bin | append-dtb | uImage none

301
target/linux/kirkwood/patches-6.1/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
View File

@ -1,301 +0,0 @@
From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sat, 29 Oct 2022 22:57:38 +0200
Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board
Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
Specification:
- Processor Marvell 88F6702 1 GHz
- 256MB RAM
- 128MB NAND
- 1x GBE LAN port (PHY: Marvell 88E1318)
- 2x USB 2.0
- 1x SATA
- 3x button
- 7x leds
- serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Adam Baker <linux@baker-net.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++
2 files changed, 260 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
+ kirkwood-nsa310s.dtb \
kirkwood-nsa320.dtb \
kirkwood-nsa325.dtb \
kirkwood-openblocks_a6.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "ZyXEL NSA310S";
+ compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ copy {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds>;
+ pinctrl-names = "default";
+
+ led-1 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usb-host";
+ };
+
+ led-3 {
+ function = LED_FUNCTION_DISK;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
+ };
+
+ led-4 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-5 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-6 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-7 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB Power";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SATA1 Power";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ thermal-zones {
+ disk-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&hdd_temp>;
+
+ trips {
+ disk_alert: disk-alert {
+ temperature = <40000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ disk_crit: disk-crit {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+
+&eth0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <&ethphy0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "htk,ht1382";
+ reg = <0x68>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii-id";
+ marvell,reg-init = <0x1 0x16 0x0 0x3>,
+ <0x1 0x10 0x0 0x1017>,
+ <0x1 0x11 0x0 0x4408>,
+ <0x1 0x16 0x0 0x0>;
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x00c0000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "uboot_env";
+ reg = <0x00c0000 0x0080000>;
+ };
+ partition@140000 {
+ label = "ubi";
+ reg = <0x0140000 0x7ec0000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp24", "mpp25", "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+ "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_power: pmx-power {
+ marvell,pins = "mpp21", "mpp33";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdd_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};

249
target/linux/kirkwood/patches-6.1/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
View File

@ -1,249 +0,0 @@
From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Mon, 3 Oct 2022 09:34:43 +0200
Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board
Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 512MB (Micron 29F4G08AAC)
- Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
- Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: MicroSD Slot
- MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
(Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
- USB: 1x USB 2.0 port
- Console: RJ-45 port
- LEDs: 3x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++
2 files changed, 206 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -300,6 +300,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2g-evm.dtb \
keystone-k2g-ice.dtb
dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-4i-edge-200.dtb \
kirkwood-b3.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-c200-v1.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Endian 4i Edge 200";
+ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led>;
+ pinctrl-names = "default";
+
+ led-1 {
+ function = LED_FUNCTION_SD;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+};
+
+&eth0port {
+ speed = <1000>;
+ duplex = <1>;
+};
+
+&eth1 {
+ status = "okay";
+};
+
+&eth1port {
+ phy-handle = <&ethphyb>;
+};
+
+&mdio {
+ status = "okay";
+
+ ethphyb: ethernet-phy@b {
+ reg = <0x0b>;
+
+ marvell,reg-init =
+ /* link-activity, bi-color mode 4 */
+ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+ };
+
+ switch0: switch@11 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x11>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "port1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "port2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "port3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "port4";
+ };
+
+ port@5 {
+ reg = <5>;
+ phy-mode = "rgmii-id";
+ ethernet = <&eth0port>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot-env";
+ reg = <0x000a0000 0x00060000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x00500000 0x1fb00000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_sysrst>;
+ pinctrl-names = "default";
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led: pmx-led {
+ marvell,pins = "mpp34", "mpp35", "mpp49";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "disabled";
+};
+
+&sata_phy1 {
+ status = "disabled";
+};
+
+&sdio {
+ pinctrl-0 = <&pmx_sdio_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};

108
target/linux/kirkwood/patches-6.1/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
View File

@ -1,108 +0,0 @@
From 8aea8659a5f3ae8dc63c9f632ce1f676a1483556 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Fri, 7 Apr 2023 17:17:20 +0200
Subject: [PATCH] ARM: dts: kirkwood: Add missing phy-mode and fixed links
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
switch to impose the RGMII delays.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/kirkwood-dir665.dts | 3 ++-
arch/arm/boot/dts/kirkwood-l-50.dts | 2 +-
arch/arm/boot/dts/kirkwood-linksys-viper.dts | 3 ++-
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 3 ++-
arch/arm/boot/dts/kirkwood-rd88f6281.dtsi | 2 +-
5 files changed, 8 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -232,7 +232,7 @@
port@6 {
reg = <6>;
- label = "cpu";
+ phy-mode = "rgmii-id";
ethernet = <&eth0port>;
fixed-link {
speed = <1000>;
@@ -251,6 +251,7 @@
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
+ phy-mode = "rgmii";
};
};
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -254,7 +254,6 @@
port@6 {
reg = <6>;
- label = "cpu";
phy-mode = "rgmii-id";
ethernet = <&eth1port>;
fixed-link {
@@ -330,6 +329,7 @@
ethernet1-port@0 {
speed = <1000>;
duplex = <1>;
+ phy-mode = "rgmii";
};
};
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -198,7 +198,7 @@
port@5 {
reg = <5>;
- label = "cpu";
+ phy-mode = "rgmii-id";
ethernet = <&eth0port>;
fixed-link {
speed = <1000>;
@@ -221,6 +221,7 @@
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
+ phy-mode = "rgmii";
};
};
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -149,7 +149,7 @@
port@5 {
reg = <5>;
- label = "cpu";
+ phy-mode = "rgmii-id";
ethernet = <&eth0port>;
fixed-link {
speed = <1000>;
@@ -166,6 +166,7 @@
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
+ phy-mode = "rgmii";
};
};
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -105,7 +105,7 @@
port@5 {
reg = <5>;
- label = "cpu";
+ phy-mode = "rgmii-id";
ethernet = <&eth0port>;
fixed-link {
speed = <1000>;

53
target/linux/kirkwood/patches-6.1/100-ib62x0.patch
View File

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -6,7 +6,14 @@
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_green_os;
+ led-failsafe = &led_red_os;
+ led-running = &led_green_os;
+ led-upgrade = &led_red_os;
+ };
memory {
device_type = "memory";
@@ -81,12 +88,12 @@
&pmx_led_usb_transfer>;
pinctrl-names = "default";
- green-os {
+ led_green_os: green-os {
label = "ib62x0:green:os";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
- red-os {
+ led_red_os: red-os {
label = "ib62x0:red:os";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
@@ -118,13 +125,13 @@
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x600000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@700000 {
- label = "root";
- reg = <0x0700000 0xf900000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0xfe00000>;
};
};

80
target/linux/kirkwood/patches-6.1/101-iconnect.patch
View File

@ -1,80 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -8,6 +8,13 @@
model = "Iomega Iconnect";
compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_red;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -16,8 +23,6 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
- linux,initrd-start = <0x4500040>;
- linux,initrd-end = <0x4800000>;
};
ocp@f1000000 {
@@ -89,12 +94,12 @@
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power-blue {
+ led_power_blue: power-blue {
label = "power:blue";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
- power-red {
+ led_power_red: power-red {
label = "power:red";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
@@ -146,28 +151,23 @@
status = "okay";
partition@0 {
- label = "uboot";
- reg = <0x0000000 0xc0000>;
+ label = "u-boot";
+ reg = <0x0000000 0xe0000>;
};
- partition@a0000 {
- label = "env";
- reg = <0xa0000 0x20000>;
+ partition@e0000 {
+ label = "u-boot environment";
+ reg = <0xe0000 0x100000>;
};
partition@100000 {
- label = "zImage";
- reg = <0x100000 0x300000>;
- };
-
- partition@540000 {
- label = "initrd";
- reg = <0x540000 0x300000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@980000 {
- label = "boot";
- reg = <0x980000 0x1f400000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x1fe00000>;
};
};

62
target/linux/kirkwood/patches-6.1/102-dockstar.patch
View File

@ -1,62 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -8,6 +8,13 @@
model = "Seagate FreeAgent Dockstar";
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
@@ -42,12 +49,12 @@
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@@ -78,18 +85,22 @@
partition@0 {
label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
+ reg = <0x0000000 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "u-boot environment";
+ reg = <0xe0000 0x100000>;
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@500000 {
- label = "data";
- reg = <0x0500000 0xfb00000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0xfe00000>;
};
};

71
target/linux/kirkwood/patches-6.1/103-iomega-ix2-200.patch
View File

@ -1,71 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -8,6 +8,13 @@
model = "Iomega StorCenter ix2-200";
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_health;
+ led-running = &led_power;
+ led-upgrade = &led_health;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -127,16 +134,16 @@
&pmx_led_rebuild &pmx_led_health >;
pinctrl-names = "default";
- power_led {
+ led_power: power_led {
label = "status:white:power_led";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
rebuild_led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
- health_led {
+ led_health: health_led {
label = "status:red:health_led";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
@@ -186,19 +193,19 @@
};
partition@a0000 {
- label = "env";
+ label = "u-boot environment";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
- label = "uImage";
- reg = <0x100000 0x300000>;
+ label = "kernel";
+ reg = <0x100000 0x400000>;
};
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x1C00000>;
+ partition@500000 {
+ label = "ubi";
+ reg = <0x500000 0x1C00000>;
};
};
@@ -211,7 +218,7 @@
};
&eth0 {
- status = "okay";
+ status = "disabled";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;

59
target/linux/kirkwood/patches-6.1/105-linksys-viper-dts.patch
View File

@ -1,59 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -24,6 +24,10 @@
};
aliases {
+ led-boot = &led_white_health;
+ led-failsafe = &led_white_health;
+ led-running = &led_white_health;
+ led-upgrade = &led_white_health;
serial0 = &uart0;
};
@@ -56,9 +60,10 @@
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
pinctrl-names = "default";
- white-health {
+ led_white_health: white-health {
label = "viper:white:health";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
white-pulse {
@@ -114,23 +119,23 @@
};
partition@200000 {
- label = "kernel";
- reg = <0x200000 0x2A0000>;
+ label = "kernel1";
+ reg = <0x200000 0x1A00000>;
};
- partition@4a0000 {
- label = "rootfs";
- reg = <0x4A0000 0x1760000>;
+ partition@600000 {
+ label = "rootfs1";
+ reg = <0x600000 0x1600000>;
};
partition@1c00000 {
- label = "alt_kernel";
- reg = <0x1C00000 0x2A0000>;
+ label = "kernel2";
+ reg = <0x1C00000 0x1A00000>;
};
- partition@1ea0000 {
- label = "alt_rootfs";
- reg = <0x1EA0000 0x1760000>;
+ partition@2000000 {
+ label = "rootfs2";
+ reg = <0x2000000 0x1600000>;
};
partition@3600000 {

53
target/linux/kirkwood/patches-6.1/106-goflexnet.patch
View File

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -8,6 +8,13 @@
model = "Seagate GoFlex Net";
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
@@ -85,12 +92,12 @@
>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@@ -159,18 +166,8 @@
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
- };
-
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0xd800000>;
+ label = "ubi";
+ reg = <0x0100000 0x0ff00000>;
};
};

48
target/linux/kirkwood/patches-6.1/107-01-zyxel-nsa3x0-common-nand-partitions.patch
View File

@ -1,48 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -112,40 +112,16 @@
partition@0 {
label = "uboot";
- reg = <0x0000000 0x0100000>;
+ reg = <0x0000000 0x00c0000>;
read-only;
};
partition@100000 {
label = "uboot_env";
- reg = <0x0100000 0x0080000>;
+ reg = <0x00c0000 0x0080000>;
};
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
+ partition@140000 {
+ label = "ubi";
+ reg = <0x0140000 0x7ec0000>;
};
};

54
target/linux/kirkwood/patches-6.1/107-03-nsa325.patch
View File

@ -1,54 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -15,6 +15,13 @@
model = "ZyXEL NSA325";
compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_green_sys;
+ led-failsafe = &led_orange_sys;
+ led-running = &led_green_sys;
+ led-upgrade = &led_orange_sys;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
@@ -162,17 +169,19 @@
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
pinctrl-names = "default";
- green-sys {
+ led_green_sys: green-sys {
label = "nsa325:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
- orange-sys {
+ led_orange_sys: orange-sys {
label = "nsa325:orange:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd1 {
label = "nsa325:green:hdd1";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
};
red-hdd1 {
label = "nsa325:red:hdd1";
@@ -181,6 +190,7 @@
green-hdd2 {
label = "nsa325:green:hdd2";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata2";
};
red-hdd2 {
label = "nsa325:red:hdd2";
@@ -189,6 +199,7 @@
green-usb {
label = "nsa325:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usb-host";
};
green-copy {
label = "nsa325:green:copy";

87
target/linux/kirkwood/patches-6.1/109-pogoplug_v4.patch
View File

@ -1,87 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -18,12 +18,20 @@
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
chosen {
+ bootargs = "console=ttyS0,115200";
stdout-path = "uart0:115200n8";
};
@@ -37,8 +45,8 @@
eject {
debounce-interval = <50>;
wakeup-source;
- linux,code = <KEY_EJECTCD>;
- label = "Eject Button";
+ linux,code = <KEY_RESTART>;
+ label = "Reset";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@@ -48,12 +56,12 @@
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "pogoplugv4:green:health";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- fault {
+ led_fault: fault {
label = "pogoplugv4:red:fault";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
@@ -137,29 +145,19 @@
#size-cells = <1>;
partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x200000>;
+ label = "uboot";
+ reg = <0x00000000 0x1c0000>;
read-only;
};
- partition@200000 {
- label = "uImage";
- reg = <0x00200000 0x300000>;
- };
-
- partition@500000 {
- label = "uImage2";
- reg = <0x00500000 0x300000>;
- };
-
- partition@800000 {
- label = "failsafe";
- reg = <0x00800000 0x800000>;
+ partition@1c0000 {
+ label = "uboot_env";
+ reg = <0x001c0000 0x40000>;
};
- partition@1000000 {
- label = "root";
- reg = <0x01000000 0x7000000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x00200000 0x7e00000>;
};
};
};

68
target/linux/kirkwood/patches-6.1/110-pogo_e02.patch
View File

@ -1,68 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
@@ -20,6 +20,13 @@
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -33,12 +40,12 @@
gpio-leds {
compatible = "gpio-leds";
- health {
+ led_health: health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
@@ -95,24 +102,24 @@
status = "okay";
partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
+ label = "uboot";
+ reg = <0x0 0xe0000>;
read-only;
};
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
+ partition@e0000 {
+ label = "uboot_env";
+ reg = <0xe0000 0x20000>;
};
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
+ partition@100000 {
+ label = "second_stage_uboot";
+ reg = <0x100000 0x100000>;
};
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0x5b00000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
};
};

47
target/linux/kirkwood/patches-6.1/111-l-50.patch
View File

@ -1,47 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -18,6 +18,13 @@
reg = <0x00000000 0x20000000>;
};
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
@@ -95,12 +102,12 @@
leds {
compatible = "gpio-leds";
- status_green {
+ led_status_green: status_green {
label = "l-50:green:status";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- status_red {
+ led_status_red: status_red {
label = "l-50:red:status";
gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
};
@@ -349,13 +356,8 @@
};
partition@100000 {
- label = "kernel-1";
- reg = <0x00100000 0x00800000>;
- };
-
- partition@900000 {
- label = "rootfs-1";
- reg = <0x00900000 0x07100000>;
+ label = "ubi";
+ reg = <0x00100000 0x07900000>;
};
partition@7a00000 {

47
target/linux/kirkwood/patches-6.1/112-sheevaplug.patch
View File

@ -1,47 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -78,13 +78,8 @@
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "root";
- reg = <0x0500000 0x1fb00000>;
+ label = "ubi";
+ reg = <0x0100000 0x1ff00000>;
};
};
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -13,6 +13,13 @@
model = "Globalscale Technologies SheevaPlug";
compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_health;
+ led-running = &led_health;
+ led-upgrade = &led_health;
+ };
+
ocp@f1000000 {
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio>;
@@ -28,10 +35,10 @@
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "sheevaplug:blue:health";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
misc {

76
target/linux/kirkwood/patches-6.1/113-readynas_duo_v2.patch
View File

@ -1,76 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -19,6 +19,13 @@
reg = <0x00000000 0x10000000>;
};
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -115,7 +122,7 @@
&pmx_led_blue_backup >;
pinctrl-names = "default";
- power_led {
+ led_power: power_led {
label = "status:blue:power_led";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
default-state = "keep";
@@ -129,11 +136,13 @@
disk1_led {
label = "status:blue:disk1_led";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata1";
};
disk2_led {
label = "status:blue:disk2_led";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata2";
};
backup_led {
@@ -150,7 +159,13 @@
power-button {
label = "Power Button";
- linux,code = <KEY_POWER>;
+ /* Power button and INT pin from PHY are both connected
+ * to this GPIO. Every network restart causes PHY restart
+ * and button is pressed. It's difficult to use it as
+ * KEY_POWER without changes in kernel (or netifd) so
+ * the button is configured as regular one.
+ */
+ linux,code = <BTN_1>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@@ -208,18 +223,13 @@
};
partition@200000 {
- label = "uImage";
+ label = "kernel";
reg = <0x0200000 0x600000>;
};
partition@800000 {
- label = "minirootfs";
- reg = <0x0800000 0x1000000>;
- };
-
- partition@1800000 {
- label = "jffs2";
- reg = <0x1800000 0x6800000>;
+ label = "ubi";
+ reg = <0x0800000 0x7800000>;
};
};

58
target/linux/kirkwood/patches-6.1/114-ctera-c-200-v1.patch
View File

@ -1,58 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -14,6 +14,14 @@
model = "Ctera C200 V1";
compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
@@ -78,6 +86,7 @@
function-enumerator = <1>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata1";
};
led-2 {
@@ -85,6 +94,7 @@
function-enumerator = <2>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata2";
};
led-3 {
@@ -94,13 +104,13 @@
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
- led-4 {
+ led_status_red: led-4 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- led-5 {
+ led_status_green: led-5 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
@@ -240,7 +250,7 @@
};
partition@7a00000 {
- label = "rootfs";
+ label = "ubi";
reg = <0x7a00000 0x8600000>;
};
};

35
target/linux/kirkwood/patches-6.1/115-nsa310s.patch
View File

@ -1,35 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-nsa310s.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
@@ -16,6 +16,13 @@
model = "ZyXEL NSA310S";
compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_green_sys;
+ led-failsafe = &led_red_sys;
+ led-running = &led_green_sys;
+ led-upgrade = &led_red_sys;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -96,14 +103,16 @@
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
- led-6 {
+ led_green_sys: led-6 {
+ label = "nsa310s:green:sys";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- led-7 {
+ led_red_sys: led-7 {
+ label = "nsa310s:red:sys";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;

34
target/linux/kirkwood/patches-6.1/116-4i-edge-200.patch
View File

@ -1,34 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -20,6 +20,13 @@
reg = <0x00000000 0x20000000>;
};
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_orange;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_orange;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
@@ -37,13 +44,15 @@
linux,default-trigger = "mmc0";
};
- led-2 {
+ led_status_orange: led-2 {
+ label = "orange:status";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
- led-3 {
+ led_status_green: led-3 {
+ label = "green:status";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;

10
target/linux/kirkwood/patches-6.1/117-netgear_stora.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
+ kirkwood-stora.dtb \
kirkwood-t5325.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \

35
target/linux/kirkwood/patches-6.1/118-dns-320l.patch
View File

@ -1,35 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-db-88f6282.dtb \
kirkwood-dir665.dtb \
kirkwood-dns320.dtb \
+ kirkwood-dns320l.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
--- a/arch/arm/boot/dts/kirkwood-dns320l.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320l.dts
@@ -32,6 +32,13 @@
reg = <0x00000000 0x10000000>;
};
+ aliases {
+ led-boot = &led_orange_usb;
+ led-failsafe = &led_orange_usb;
+ led-running = &led_orange_usb;
+ led-upgrade = &led_orange_usb;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -68,7 +75,7 @@
linux,default-trigger = "usbport";
};
- orange-usb {
+ led_orange_usb: orange-usb {
label = "dns320l:usb:orange";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};

10
target/linux/kirkwood/patches-6.1/201-enable-sata-port-specific-led-triggers.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -115,6 +115,7 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
+ select ARCH_WANT_LIBATA_LEDS
select CPU_FEROCEON
select GPIOLIB
select KIRKWOOD_CLK

62
target/linux/kirkwood/patches-6.1/202-linksys-find-active-root.patch
View File

@ -1,62 +0,0 @@
The WRT1900AC among other Linksys routers uses a dual-firmware layout.
Dynamically rename the active partition to "ubi".
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
--- a/drivers/mtd/parsers/ofpart_core.c
+++ b/drivers/mtd/parsers/ofpart_core.c
@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
return of_get_property(pp, "compatible", NULL);
}
+static int mangled_rootblock;
+
static int parse_fixed_partitions(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct
struct mtd_partition *parts;
struct device_node *mtd_node;
struct device_node *ofpart_node;
+ const char *owrtpart = "ubi";
const char *partname;
struct device_node *pp;
int nr_parts, i, ret = 0;
@@ -152,9 +155,15 @@ static int parse_fixed_partitions(struct
parts[i].size = of_read_number(reg + a_cells, s_cells);
parts[i].of_node = pp;
- partname = of_get_property(pp, "label", &len);
- if (!partname)
- partname = of_get_property(pp, "name", &len);
+ if (mangled_rootblock && (i == mangled_rootblock)) {
+ partname = owrtpart;
+ } else {
+ partname = of_get_property(pp, "label", &len);
+
+ if (!partname)
+ partname = of_get_property(pp, "name", &len);
+ }
+
parts[i].name = partname;
if (of_get_property(pp, "read-only", &len))
@@ -271,6 +280,18 @@ static int __init ofpart_parser_init(voi
return 0;
}
+static int __init active_root(char *str)
+{
+ get_option(&str, &mangled_rootblock);
+
+ if (!mangled_rootblock)
+ return 1;
+
+ return 1;
+}
+
+__setup("mangled_rootblock=", active_root);
+
static void __exit ofpart_parser_exit(void)
{
deregister_mtd_parser(&ofpart_parser);

99
target/linux/kirkwood/patches-6.1/203-blackarmor-nas220.patch
View File

@ -1,99 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
@@ -17,6 +17,13 @@
compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_status_amber;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_amber;
+ };
+
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
@@ -36,14 +43,14 @@
compatible = "gpio-keys";
reset {
- label = "Reset";
- linux,code = <KEY_POWER>;
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
- button {
- label = "Power";
- linux,code = <KEY_SLEEP>;
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
};
@@ -51,11 +58,27 @@
gpio-leds {
compatible = "gpio-leds";
- blue-power {
+ led_power_blue: power_blue {
label = "nas220:blue:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
+
+ disk_blue {
+ label = "nas220:blue:disk";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ led_status_blue: status_blue {
+ label = "nas220:blue:status";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_amber: status_amber {
+ label = "nas220:amber:status";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
};
regulators {
@@ -153,6 +176,33 @@
&nand {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "uboot-env";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "reserved";
+ reg = <0xb0000 0x10000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "ubi";
+ reg = <0xc0000 0x1e80000>;
+ };
+ };
};
&mdio {