mac80211: update to 2014-10-08

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42952
This commit is contained in:
Felix Fietkau 2014-10-18 17:38:59 +00:00
parent 6d3fd947e4
commit f0d9e712e4
59 changed files with 2270 additions and 1460 deletions
package/kernel/mac80211
Makefile
patches
060-no_local_ssb_bcma.patch210-ap_scan.patch300-Revert-ath5k-Remove-AHB-bus-support.patch300-pending_work.patch301-ath5k-fix-AHB-kconfig-dependency.patch302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch303-ath9k-Use-sta_state-callback.patch304-ath9k-Enable-multi-channel-properly.patch305-ath9k-Process-beacons-properly.patch306-ath9k-Unify-reset-API.patch307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch308-ath9k-Disable-beacon-tasklet-during-reset.patch309-ath9k-Clear-NoA-schedule-properly.patch310-ath9k-Use-configurable-timeout-for-flush.patch311-ath9k-Fix-MCC-flush-timeout.patch312-ath9k-Fix-offchannel-flush-timeout.patch313-ath9k-Check-for-pending-frames-properly.patch314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch315-ath9k-Fix-address-management.patch316-ath9k-Add-a-function-to-check-for-an-active-GO.patch317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch319-ath9k-Use-a-helper-function-to-set-NoA.patch320-ath9k-Use-a-helper-function-for-bmiss.patch321-ath9k-Fix-RoC-expiration.patch322-ath9k-Send-oneshot-NoA.patch323-ath9k-Fix-HW-scan-abort.patch324-ath9k-Improve-flush-in-mcc-mode.patch325-ath9k-Do-not-start-BA-when-scanning.patch326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch328-ath9k-fix-processing-RXORN-interrupts.patch329-ath9k-clean-up-debugfs-print-of-reset-causes.patch330-ath9k-restart-hardware-after-noise-floor-calibration.patch331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch334-ath9k-allow-disabling-bands-via-platform-data.patch335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch400-ath_move_debug_code.patch402-ath_regd_optional.patch403-world_regd_fixup.patch404-regd_no_assoc_hints.patch405-ath_regd_us.patch410-ath9k_allow_adhoc_and_ap.patch500-ath9k_eeprom_debugfs.patch501-ath9k_ahb_init.patch512-ath9k_channelbw_debugfs.patch513-ath9k_add_pci_ids.patch521-ath9k_cur_txpower.patch530-ath9k_extra_leds.patch531-ath9k_extra_platform_leds.patch542-ath9k_debugfs_diag.patch543-ath9k_entropy_from_adc.patch544-ath9k-ar933x-usb-hang-workaround.patch545-ath9k_ani_ws_detect.patch563-ath9k_rxorn_intr_fix.patch603-rt2x00-introduce-rt2x00eeprom.patch

View File

@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=2014-09-26
PKG_VERSION:=2014-10-08
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
PKG_MD5SUM:=b66f5fbd10e335fc660182ce6114d41f
PKG_MD5SUM:=20e9de70e63fd9649d61d4670a9cc1bd
PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)

View File

@ -1,6 +1,6 @@
--- a/.local-symbols
+++ b/.local-symbols
@@ -414,42 +414,6 @@ USB_CDC_PHONET=
@@ -416,42 +416,6 @@ USB_CDC_PHONET=
USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=

View File

@ -0,0 +1,395 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 27 Sep 2014 15:57:09 +0200
Subject: [PATCH] Revert "ath5k: Remove AHB bus support"
This reverts commit 093ec3c5337434f40d77c1af06c139da3e5ba6dc.
---
create mode 100644 drivers/net/wireless/ath/ath5k/ahb.c
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,14 @@
config ATH5K
tristate "Atheros 5xxx wireless cards support"
depends on m
- depends on PCI && MAC80211
+ depends on (PCI || ATHEROS_AR231X) && MAC80211
select ATH_COMMON
select MAC80211_LEDS
select BACKPORT_LEDS_CLASS
select BACKPORT_NEW_LEDS
select BACKPORT_AVERAGE
- select ATH5K_PCI
+ select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
+ select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
---help---
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
@@ -52,9 +53,16 @@ config ATH5K_TRACER
If unsure, say N.
+config ATH5K_AHB
+ bool "Atheros 5xxx AHB bus support"
+ depends on (ATHEROS_AR231X && !PCI)
+ ---help---
+ This adds support for WiSoC type chipsets of the 5xxx Atheros
+ family.
+
config ATH5K_PCI
bool "Atheros 5xxx PCI bus support"
- depends on PCI
+ depends on (!ATHEROS_AR231X && PCI)
---help---
This adds support for PCI type chipsets of the 5xxx Atheros
family.
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -17,5 +17,6 @@ ath5k-y += ani.o
ath5k-y += sysfs.o
ath5k-y += mac80211-ops.o
ath5k-$(CPTCFG_ATH5K_DEBUG) += debug.o
+ath5k-$(CPTCFG_ATH5K_AHB) += ahb.o
ath5k-$(CPTCFG_ATH5K_PCI) += pci.o
obj-$(CPTCFG_ATH5K) += ath5k.o
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <ar231x_platform.h>
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+
+/* return bus cachesize in 4B word units */
+static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
+{
+ *csz = L1_CACHE_BYTES >> 2;
+}
+
+static bool
+ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
+{
+ struct ath5k_hw *ah = common->priv;
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u16 *eeprom, *eeprom_end;
+
+ eeprom = (u16 *) bcfg->radio;
+ eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
+
+ eeprom += off;
+ if (eeprom > eeprom_end)
+ return false;
+
+ *data = *eeprom;
+ return true;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ ah->ah_mac_srev = bcfg->devid;
+ return 0;
+}
+
+static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+ struct platform_device *pdev = to_platform_device(ah->dev);
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ u8 *cfg_mac;
+
+ if (to_platform_device(ah->dev)->id == 0)
+ cfg_mac = bcfg->config->wlan0_mac;
+ else
+ cfg_mac = bcfg->config->wlan1_mac;
+
+ memcpy(mac, cfg_mac, ETH_ALEN);
+ return 0;
+}
+
+static const struct ath_bus_ops ath_ahb_bus_ops = {
+ .ath_bus_type = ATH_AHB,
+ .read_cachesize = ath5k_ahb_read_cachesize,
+ .eeprom_read = ath5k_ahb_eeprom_read,
+ .eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
+};
+
+/*Initialization*/
+static int ath_ahb_probe(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ath5k_hw *ah;
+ struct ieee80211_hw *hw;
+ struct resource *res;
+ void __iomem *mem;
+ int irq;
+ int ret = 0;
+ u32 reg;
+
+ if (!dev_get_platdata(&pdev->dev)) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource found\n");
+ ret = -ENXIO;
+ goto err_out;
+ }
+
+ mem = ioremap_nocache(res->start, resource_size(res));
+ if (mem == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no IRQ resource found\n");
+ ret = -ENXIO;
+ goto err_iounmap;
+ }
+
+ irq = res->start;
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
+ if (hw == NULL) {
+ dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ ah = hw->priv;
+ ah->hw = hw;
+ ah->dev = &pdev->dev;
+ ah->iobase = mem;
+ ah->irq = irq;
+ ah->devid = bcfg->devid;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Enable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+
+ /* Enable global WMAC swapping */
+ reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
+ reg |= AR5K_AR2315_BYTESWAP_WMAC;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
+ } else {
+ /* Enable WMAC DMA access (assuming 5312 or 231x*/
+ /* TODO: check other platforms */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg |= AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg |= AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+
+ /*
+ * On a dual-band AR5312, the multiband radio is only
+ * used as pass-through. Disable 2 GHz support in the
+ * driver for it
+ */
+ if (to_platform_device(ah->dev)->id == 0 &&
+ (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
+ (BD_WLAN1 | BD_WLAN0))
+ ah->ah_capabilities.cap_needs_2GHz_ovr = true;
+ else
+ ah->ah_capabilities.cap_needs_2GHz_ovr = false;
+ }
+
+ ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
+ ret = -ENODEV;
+ goto err_free_hw;
+ }
+
+ platform_set_drvdata(pdev, hw);
+
+ return 0;
+
+ err_free_hw:
+ ieee80211_free_hw(hw);
+ err_iounmap:
+ iounmap(mem);
+ err_out:
+ return ret;
+}
+
+static int ath_ahb_remove(struct platform_device *pdev)
+{
+ struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct ath5k_hw *ah;
+ u32 reg;
+
+ if (!hw)
+ return 0;
+
+ ah = hw->priv;
+
+ if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+ /* Disable WMAC AHB arbitration */
+ reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
+ iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+ } else {
+ /*Stop DMA access */
+ reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
+ if (to_platform_device(ah->dev)->id == 0)
+ reg &= ~AR5K_AR5312_ENABLE_WLAN0;
+ else
+ reg &= ~AR5K_AR5312_ENABLE_WLAN1;
+ iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+ }
+
+ ath5k_deinit_ah(ah);
+ iounmap(ah->iobase);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+
+static struct platform_driver ath_ahb_driver = {
+ .probe = ath_ahb_probe,
+ .remove = ath_ahb_remove,
+ .driver = {
+ .name = "ar231x-wmac",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ath_ahb_driver);
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1647,6 +1647,32 @@ static inline struct ath_regulatory *ath
return &(ath5k_hw_common(ah)->regulatory);
}
+#ifdef CONFIG_ATHEROS_AR231X
+#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000)
+
+static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
+{
+ /* On AR2315 and AR2317 the PCI clock domain registers
+ * are outside of the WMAC register space */
+ if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
+ (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+ return AR5K_AR2315_PCI_BASE + reg;
+
+ return ah->iobase + reg;
+}
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+ return ioread32(ath5k_ahb_reg(ah, reg));
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+ iowrite32(val, ath5k_ahb_reg(ah, reg));
+}
+
+#else
+
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
return ioread32(ah->iobase + reg);
@@ -1657,6 +1683,8 @@ static inline void ath5k_hw_reg_write(st
iowrite32(val, ah->iobase + reg);
}
+#endif
+
static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
{
return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,6 +99,15 @@ static int ath5k_reset(struct ath5k_hw *
/* Known SREVs */
static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATHEROS_AR231X
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 },
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 },
+ { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 },
+#else
{ "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
{ "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
{ "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
@@ -117,6 +126,7 @@ static const struct ath5k_srev_name srev
{ "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
{ "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
{ "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+#endif
{ "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
@@ -132,6 +142,10 @@ static const struct ath5k_srev_name srev
{ "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
{ "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATHEROS_AR231X
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+#endif
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -163,14 +163,20 @@ int ath5k_init_leds(struct ath5k_hw *ah)
{
int ret = 0;
struct ieee80211_hw *hw = ah->hw;
+#ifndef CONFIG_ATHEROS_AR231X
struct pci_dev *pdev = ah->pdev;
+#endif
char name[ATH5K_LED_MAX_NAME_LEN + 1];
const struct pci_device_id *match;
if (!ah->pdev)
return 0;
+#ifdef CONFIG_ATHEROS_AR231X
+ match = NULL;
+#else
match = pci_match_id(&ath5k_led_devices[0], pdev);
+#endif
if (match) {
__set_bit(ATH_STAT_LEDSOFT, ah->status);
ah->led_pin = ATH_PIN(match->driver_data);

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,37 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 27 Sep 2014 15:58:51 +0200
Subject: [PATCH] ath5k: fix AHB kconfig dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -7,8 +7,8 @@ config ATH5K
select BACKPORT_LEDS_CLASS
select BACKPORT_NEW_LEDS
select BACKPORT_AVERAGE
- select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
- select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+ select ATH5K_AHB if ATHEROS_AR231X
+ select ATH5K_PCI if !ATHEROS_AR231X
---help---
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
@@ -55,14 +55,14 @@ config ATH5K_TRACER
config ATH5K_AHB
bool "Atheros 5xxx AHB bus support"
- depends on (ATHEROS_AR231X && !PCI)
+ depends on ATHEROS_AR231X
---help---
This adds support for WiSoC type chipsets of the 5xxx Atheros
family.
config ATH5K_PCI
bool "Atheros 5xxx PCI bus support"
- depends on (!ATHEROS_AR231X && PCI)
+ depends on !ATHEROS_AR231X
---help---
This adds support for PCI type chipsets of the 5xxx Atheros
family.

View File

@ -0,0 +1,20 @@
From: Karl Beldan <karl.beldan@rivierawaves.com>
Date: Tue, 7 Oct 2014 15:53:38 +0200
Subject: [PATCH] mac80211/trivial: fix typo in starting baserate for
rts_cts_rate_idx
Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates")
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
---
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -448,7 +448,7 @@ static void rate_fixup_ratelist(struct i
*/
if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) {
u32 basic_rates = vif->bss_conf.basic_rates;
- s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0;
+ s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0;
rate = &sband->bitrates[rates[0].idx];

View File

@ -0,0 +1,55 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:08 +0530
Subject: [PATCH] ath9k: Use sta_state() callback
Instead of using the sta_add()/sta_remove() callbacks,
use the sta_state() callback since this gives
more fine-grained control.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1547,6 +1547,31 @@ static int ath9k_sta_remove(struct ieee8
return 0;
}
+static int ath9k_sta_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ enum ieee80211_sta_state old_state,
+ enum ieee80211_sta_state new_state)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ int ret = 0;
+
+ if (old_state == IEEE80211_STA_AUTH &&
+ new_state == IEEE80211_STA_ASSOC) {
+ ret = ath9k_sta_add(hw, vif, sta);
+ ath_dbg(common, CONFIG,
+ "Add station: %pM\n", sta->addr);
+ } else if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTH) {
+ ret = ath9k_sta_remove(hw, vif, sta);
+ ath_dbg(common, CONFIG,
+ "Remove station: %pM\n", sta->addr);
+ }
+
+ return ret;
+}
+
static void ath9k_sta_set_tx_filter(struct ath_hw *ah,
struct ath_node *an,
bool set)
@@ -2471,8 +2496,7 @@ struct ieee80211_ops ath9k_ops = {
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
.configure_filter = ath9k_configure_filter,
- .sta_add = ath9k_sta_add,
- .sta_remove = ath9k_sta_remove,
+ .sta_state = ath9k_sta_state,
.sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
.bss_info_changed = ath9k_bss_info_changed,

View File

@ -0,0 +1,82 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:09 +0530
Subject: [PATCH] ath9k: Enable multi-channel properly
In MCC mode, currently the decision to enable
the multi-channel state machine is done
based on the association status if one of
the interfaces assigned to a context is in
station mode.
This allows the driver to switch to the other
context before the current station is able to
complete the 4-way handshake in case it is
required and this causes problems.
Instead, enable multi-channel mode when the
station moves to the authorized state. This
disallows an early switch to the other channel.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -362,7 +362,7 @@ enum ath_chanctx_event {
ATH_CHANCTX_EVENT_BEACON_SENT,
ATH_CHANCTX_EVENT_TSF_TIMER,
ATH_CHANCTX_EVENT_BEACON_RECEIVED,
- ATH_CHANCTX_EVENT_ASSOC,
+ ATH_CHANCTX_EVENT_AUTHORIZED,
ATH_CHANCTX_EVENT_SWITCH,
ATH_CHANCTX_EVENT_ASSIGN,
ATH_CHANCTX_EVENT_UNASSIGN,
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -171,7 +171,7 @@ static const char *chanctx_event_string(
case_rtn_string(ATH_CHANCTX_EVENT_BEACON_SENT);
case_rtn_string(ATH_CHANCTX_EVENT_TSF_TIMER);
case_rtn_string(ATH_CHANCTX_EVENT_BEACON_RECEIVED);
- case_rtn_string(ATH_CHANCTX_EVENT_ASSOC);
+ case_rtn_string(ATH_CHANCTX_EVENT_AUTHORIZED);
case_rtn_string(ATH_CHANCTX_EVENT_SWITCH);
case_rtn_string(ATH_CHANCTX_EVENT_ASSIGN);
case_rtn_string(ATH_CHANCTX_EVENT_UNASSIGN);
@@ -510,7 +510,7 @@ void ath_chanctx_event(struct ath_softc
ath_chanctx_setup_timer(sc, tsf_time);
break;
- case ATH_CHANCTX_EVENT_ASSOC:
+ case ATH_CHANCTX_EVENT_AUTHORIZED:
if (sc->sched.state != ATH_CHANCTX_STATE_FORCE_ACTIVE ||
avp->chanctx != sc->cur_chan)
break;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1569,6 +1569,13 @@ static int ath9k_sta_state(struct ieee80
"Remove station: %pM\n", sta->addr);
}
+ if (ath9k_is_chanctx_enabled()) {
+ if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTHORIZED)
+ ath_chanctx_event(sc, vif,
+ ATH_CHANCTX_EVENT_AUTHORIZED);
+ }
+
return ret;
}
@@ -1761,12 +1768,6 @@ static void ath9k_bss_info_changed(struc
avp->assoc = bss_conf->assoc;
ath9k_calculate_summary_state(sc, avp->chanctx);
-
- if (ath9k_is_chanctx_enabled()) {
- if (bss_conf->assoc)
- ath_chanctx_event(sc, vif,
- ATH_CHANCTX_EVENT_ASSOC);
- }
}
if (changed & BSS_CHANGED_IBSS) {

View File

@ -0,0 +1,37 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:10 +0530
Subject: [PATCH] ath9k: Process beacons properly
When the current operating channel context has
been marked as ATH_CHANCTX_STATE_FORCE_ACTIVE,
do not process beacons that might be received,
since we have to wait for the station to become
authorized.
Also, since the cached TSF value will be zero
initially do not rearm the timer in this
case when a beacon is received, since it results
in spurious values.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -495,10 +495,15 @@ void ath_chanctx_event(struct ath_softc
sc->cur_chan == &sc->offchannel.chan)
break;
- ath_chanctx_adjust_tbtt_delta(sc);
sc->sched.beacon_pending = false;
sc->sched.beacon_miss = 0;
+ if (sc->sched.state == ATH_CHANCTX_STATE_FORCE_ACTIVE ||
+ !sc->cur_chan->tsf_val)
+ break;
+
+ ath_chanctx_adjust_tbtt_delta(sc);
+
/* TSF time might have been updated by the incoming beacon,
* need update the channel switch timer to reflect the change.
*/

View File

@ -0,0 +1,108 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:11 +0530
Subject: [PATCH] ath9k: Unify reset API
Instead of having ath_reset_internal() and ath_reset()
as two separate calls to perform a HW reset, have
one function. This makes sure that the behavior will
be the same at all callsites.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -540,7 +540,6 @@ static inline void ath_chanctx_check_act
#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
-int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan);
void ath_startrecv(struct ath_softc *sc);
bool ath_stoprecv(struct ath_softc *sc);
u32 ath_calcrxfilter(struct ath_softc *sc);
@@ -1069,7 +1068,7 @@ void ath9k_tasklet(unsigned long data);
int ath_cabq_update(struct ath_softc *);
u8 ath9k_parse_mpdudensity(u8 mpdudensity);
irqreturn_t ath_isr(int irq, void *dev);
-int ath_reset(struct ath_softc *sc);
+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan);
void ath_cancel_work(struct ath_softc *sc);
void ath_restart_work(struct ath_softc *sc);
int ath9k_init_device(u16 devid, struct ath_softc *sc,
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -66,7 +66,7 @@ static int ath_set_channel(struct ath_so
}
hchan = &sc->sc_ah->channels[pos];
- r = ath_reset_internal(sc, hchan);
+ r = ath_reset(sc, hchan);
if (r)
return r;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -270,7 +270,7 @@ static bool ath_complete_reset(struct at
return true;
}
-int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
@@ -598,12 +598,12 @@ chip_reset:
#undef SCHED_INTR
}
-int ath_reset(struct ath_softc *sc)
+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan)
{
int r;
ath9k_ps_wakeup(sc);
- r = ath_reset_internal(sc, NULL);
+ r = ath_reset_internal(sc, hchan);
ath9k_ps_restore(sc);
return r;
@@ -623,7 +623,9 @@ void ath_reset_work(struct work_struct *
{
struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work);
- ath_reset(sc);
+ ath9k_ps_wakeup(sc);
+ ath_reset_internal(sc, NULL);
+ ath9k_ps_restore(sc);
}
/**********************/
@@ -2044,7 +2046,7 @@ void __ath9k_flush(struct ieee80211_hw *
spin_unlock_bh(&sc->sc_pcu_lock);
if (!drain_txq)
- ath_reset(sc);
+ ath_reset(sc, NULL);
ath9k_ps_restore(sc);
}
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -99,7 +99,7 @@ static struct sk_buff *ath9k_build_tx99_
static void ath9k_tx99_deinit(struct ath_softc *sc)
{
- ath_reset(sc);
+ ath_reset(sc, NULL);
ath9k_ps_wakeup(sc);
ath9k_tx99_stop(sc);
@@ -127,7 +127,7 @@ static int ath9k_tx99_init(struct ath_so
memset(&txctl, 0, sizeof(txctl));
txctl.txq = sc->tx.txq_map[IEEE80211_AC_VO];
- ath_reset(sc);
+ ath_reset(sc, NULL);
ath9k_ps_wakeup(sc);

View File

@ -0,0 +1,55 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:12 +0530
Subject: [PATCH] ath9k: Set ATH_OP_HW_RESET before HW reset
When a HW reset is done, the interrupt tasklet is
disabled before ISRs are disabled in the HW. This
allows a small window where the HW can still generate
interrupts. Since the tasklet is disabled and not killed,
it is not scheduled but deferred for execution at a later
time.
This happens because ATH_OP_HW_RESET is not set when ath_reset()
is called. When the hw_reset_work workqueue is used, this
problem doesn't arise because ATH_OP_HW_RESET is set
and the ISR bails out.
Set ATH_OP_HW_RESET properly in ath_reset() to avoid
this race - all the ath_reset_internal() callers have
been converted to use ath_reset() in the previous patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -598,10 +598,17 @@ chip_reset:
#undef SCHED_INTR
}
+/*
+ * This function is called when a HW reset cannot be deferred
+ * and has to be immediate.
+ */
int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan)
{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int r;
+ set_bit(ATH_OP_HW_RESET, &common->op_flags);
+
ath9k_ps_wakeup(sc);
r = ath_reset_internal(sc, hchan);
ath9k_ps_restore(sc);
@@ -609,6 +616,11 @@ int ath_reset(struct ath_softc *sc, stru
return r;
}
+/*
+ * When a HW reset can be deferred, it is added to the
+ * hw_reset_work workqueue, but we set ATH_OP_HW_RESET before
+ * queueing.
+ */
void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);

View File

@ -0,0 +1,29 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:13 +0530
Subject: [PATCH] ath9k: Disable beacon tasklet during reset
When a chip reset is done, all running timers,
tasklets etc. are stopped but the beacon tasklet
is left running. Fix this.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -281,6 +281,7 @@ static int ath_reset_internal(struct ath
__ath_cancel_work(sc);
tasklet_disable(&sc->intr_tq);
+ tasklet_disable(&sc->bcon_tasklet);
spin_lock_bh(&sc->sc_pcu_lock);
if (!sc->cur_chan->offchannel) {
@@ -326,6 +327,7 @@ static int ath_reset_internal(struct ath
out:
spin_unlock_bh(&sc->sc_pcu_lock);
+ tasklet_enable(&sc->bcon_tasklet);
tasklet_enable(&sc->intr_tq);
return r;

View File

@ -0,0 +1,36 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:14 +0530
Subject: [PATCH] ath9k: Clear NoA schedule properly
When an active context transitions to inactive
state, the NoA schedule needs to be removed
for the context that has beaconing enabled.
Not doing this will affect p2p clients.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -356,6 +356,21 @@ void ath_chanctx_event(struct ath_softc
"Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n");
}
+ /*
+ * When a context becomes inactive, for example,
+ * disassociation of a station context, the NoA
+ * attribute needs to be removed from subsequent
+ * beacons.
+ */
+ if (!ctx->active && avp->noa_duration &&
+ sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON) {
+ avp->noa_duration = 0;
+ avp->periodic_noa = false;
+
+ ath_dbg(common, CHAN_CTX,
+ "Clearing NoA schedule\n");
+ }
+
if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON)
break;

View File

@ -0,0 +1,57 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:15 +0530
Subject: [PATCH] ath9k: Use configurable timeout for flush
The timeout value for flushing the TX queues
is hardcoded at 200ms right now. Use a channel
context-specific value instead to allow adjustments
to the timeout in case MCC is enabled.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -345,6 +345,7 @@ struct ath_chanctx {
u64 tsf_val;
u32 last_beacon;
+ int flush_timeout;
u16 txpower;
bool offchannel;
bool stopped;
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -117,6 +117,7 @@ void ath_chanctx_init(struct ath_softc *
cfg80211_chandef_create(&ctx->chandef, chan, NL80211_CHAN_HT20);
INIT_LIST_HEAD(&ctx->vifs);
ctx->txpower = ATH_TXPOWER_MAX;
+ ctx->flush_timeout = HZ / 5; /* 200ms */
for (j = 0; j < ARRAY_SIZE(ctx->acq); j++)
INIT_LIST_HEAD(&ctx->acq[j]);
}
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2034,7 +2034,7 @@ void __ath9k_flush(struct ieee80211_hw *
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- int timeout = HZ / 5; /* 200 ms */
+ int timeout;
bool drain_txq;
cancel_delayed_work_sync(&sc->tx_complete_work);
@@ -2049,6 +2049,13 @@ void __ath9k_flush(struct ieee80211_hw *
return;
}
+ spin_lock_bh(&sc->chan_lock);
+ timeout = sc->cur_chan->flush_timeout;
+ spin_unlock_bh(&sc->chan_lock);
+
+ ath_dbg(common, CHAN_CTX,
+ "Flush timeout: %d\n", jiffies_to_msecs(timeout));
+
if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc),
timeout) > 0)
drop = false;

View File

@ -0,0 +1,68 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:16 +0530
Subject: [PATCH] ath9k: Fix MCC flush timeout
In MCC mode, the duration for a channel context
is half the beacon interval and having a large
flush timeout will adversely affect GO operation,
since the default value of 200ms will overshoot
the advertised NoA absence duration.
The scheduler initiates a channel context switch
only when the slot duration for the current
context expires, so there is no possibility of
having a fixed timeout for flush.
Since the channel_switch_time is added to the
absence duration when the GO sets up the NoA
attribute, this is the maximum time that we
have to flush the TX queues. The duration is very
small, but we don't have a choice in MCC mode.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -199,6 +199,7 @@ static const char *chanctx_state_string(
void ath_chanctx_check_active(struct ath_softc *sc, struct ath_chanctx *ctx)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_chanctx *ictx;
struct ath_vif *avp;
bool active = false;
u8 n_active = 0;
@@ -206,6 +207,8 @@ void ath_chanctx_check_active(struct ath
if (!ctx)
return;
+ ictx = ctx;
+
list_for_each_entry(avp, &ctx->vifs, list) {
struct ieee80211_vif *vif = avp->vif;
@@ -228,12 +231,23 @@ void ath_chanctx_check_active(struct ath
n_active++;
}
+ spin_lock_bh(&sc->chan_lock);
+
if (n_active <= 1) {
+ ictx->flush_timeout = HZ / 5;
clear_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags);
+ spin_unlock_bh(&sc->chan_lock);
return;
}
- if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
+
+ ictx->flush_timeout = usecs_to_jiffies(sc->sched.channel_switch_time);
+
+ if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) {
+ spin_unlock_bh(&sc->chan_lock);
return;
+ }
+
+ spin_unlock_bh(&sc->chan_lock);
if (ath9k_is_chanctx_enabled()) {
ath_chanctx_event(sc, NULL,

View File

@ -0,0 +1,43 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:17 +0530
Subject: [PATCH] ath9k: Fix offchannel flush timeout
An offchannel operation also needs to have
a flush timeout that doesn't exceed the NoA
absence duration of a GO context, so use
channel_switch_time. The first offchannel
operation is set a flush timeout of 10ms since
channel_switch_time will be zero.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -207,6 +207,26 @@ void ath_chanctx_check_active(struct ath
if (!ctx)
return;
+ if (ctx == &sc->offchannel.chan) {
+ spin_lock_bh(&sc->chan_lock);
+
+ if (likely(sc->sched.channel_switch_time))
+ ctx->flush_timeout =
+ usecs_to_jiffies(sc->sched.channel_switch_time);
+ else
+ ctx->flush_timeout =
+ msecs_to_jiffies(10);
+
+ spin_unlock_bh(&sc->chan_lock);
+
+ /*
+ * There is no need to iterate over the
+ * active/assigned channel contexts if
+ * the current context is offchannel.
+ */
+ return;
+ }
+
ictx = ctx;
list_for_each_entry(avp, &ctx->vifs, list) {

View File

@ -0,0 +1,125 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:18 +0530
Subject: [PATCH] ath9k: Check for pending frames properly
Pending frames in the driver can be present
either in the HW queues or SW. ath9k_has_pending_frames()
currently checks for the HW queues first and then
checks if any ACs are queued in the driver.
In MCC mode, we need to check the HW queues alone, since
the SW queues are just marked as 'stopped' - they will
be processed in the next context switch. But since we
don't differentiate this now, mention whether we want
to check if there are frames in the SW queues.
* The flush() callback checks both HW and SW queues.
* The tx_frames_pending() callback does the same.
* The call to __ath9k_flush() in MCC mode checks HW queues alone.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -715,7 +715,8 @@ int ath_update_survey_stats(struct ath_s
void ath_update_survey_nf(struct ath_softc *sc, int channel);
void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type);
void ath_ps_full_sleep(unsigned long data);
-void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop);
+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
+ bool sw_pending);
/**********/
/* BTCOEX */
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -1137,10 +1137,11 @@ void ath_chanctx_set_next(struct ath_sof
ath9k_chanctx_stop_queues(sc, sc->cur_chan);
queues_stopped = true;
- __ath9k_flush(sc->hw, ~0, true);
+ __ath9k_flush(sc->hw, ~0, true, false);
if (ath_chanctx_send_ps_frame(sc, true))
- __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO), false);
+ __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO),
+ false, false);
send_ps = true;
spin_lock_bh(&sc->chan_lock);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -54,7 +54,8 @@ u8 ath9k_parse_mpdudensity(u8 mpdudensit
}
}
-static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq)
+static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq,
+ bool sw_pending)
{
bool pending = false;
@@ -65,6 +66,9 @@ static bool ath9k_has_pending_frames(str
goto out;
}
+ if (!sw_pending)
+ goto out;
+
if (txq->mac80211_qnum >= 0) {
struct list_head *list;
@@ -2003,7 +2007,8 @@ static void ath9k_set_coverage_class(str
mutex_unlock(&sc->mutex);
}
-static bool ath9k_has_tx_pending(struct ath_softc *sc)
+static bool ath9k_has_tx_pending(struct ath_softc *sc,
+ bool sw_pending)
{
int i, npend = 0;
@@ -2011,7 +2016,8 @@ static bool ath9k_has_tx_pending(struct
if (!ATH_TXQ_SETUP(sc, i))
continue;
- npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
+ npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i],
+ sw_pending);
if (npend)
break;
}
@@ -2025,11 +2031,12 @@ static void ath9k_flush(struct ieee80211
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
- __ath9k_flush(hw, queues, drop);
+ __ath9k_flush(hw, queues, drop, true);
mutex_unlock(&sc->mutex);
}
-void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
+ bool sw_pending)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
@@ -2056,7 +2063,7 @@ void __ath9k_flush(struct ieee80211_hw *
ath_dbg(common, CHAN_CTX,
"Flush timeout: %d\n", jiffies_to_msecs(timeout));
- if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc),
+ if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc, sw_pending),
timeout) > 0)
drop = false;
@@ -2079,7 +2086,7 @@ static bool ath9k_tx_frames_pending(stru
{
struct ath_softc *sc = hw->priv;
- return ath9k_has_tx_pending(sc);
+ return ath9k_has_tx_pending(sc, true);
}
static int ath9k_tx_last_beacon(struct ieee80211_hw *hw)

View File

@ -0,0 +1,33 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:19 +0530
Subject: [PATCH] ath9k: Send AUTHORIZED event only for station mode
ATH_CHANCTX_EVENT_AUTHORIZED is required to trigger
the MCC scheduler when a station interface becomes
authorized. But, since the driver gets station state
notifications when the current operating mode is AP
too, make sure that we send ATH_CHANCTX_EVENT_AUTHORIZED
only when the interface is in station mode.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1590,10 +1590,12 @@ static int ath9k_sta_state(struct ieee80
}
if (ath9k_is_chanctx_enabled()) {
- if (old_state == IEEE80211_STA_ASSOC &&
- new_state == IEEE80211_STA_AUTHORIZED)
- ath_chanctx_event(sc, vif,
- ATH_CHANCTX_EVENT_AUTHORIZED);
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTHORIZED)
+ ath_chanctx_event(sc, vif,
+ ATH_CHANCTX_EVENT_AUTHORIZED);
+ }
}
return ret;

View File

@ -0,0 +1,65 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:20 +0530
Subject: [PATCH] ath9k: Fix address management
Since both the arguments need to satisfy
the alignment requirements of ether_addr_copy(),
use memcpy() in cases where there will be no
big performance benefit and make sure that
ether_addr_copy() calls use properly aligned
arguments.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -147,7 +147,7 @@ struct ath_common {
u16 cachelsz;
u16 curaid;
u8 macaddr[ETH_ALEN];
- u8 curbssid[ETH_ALEN];
+ u8 curbssid[ETH_ALEN] __aligned(2);
u8 bssidmask[ETH_ALEN];
u32 rx_bufsize;
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -595,7 +595,7 @@ struct ath_vif {
u16 seq_no;
/* BSS info */
- u8 bssid[ETH_ALEN];
+ u8 bssid[ETH_ALEN] __aligned(2);
u16 aid;
bool assoc;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1057,7 +1057,7 @@ static void ath9k_set_offchannel_state(s
eth_zero_addr(common->curbssid);
eth_broadcast_addr(common->bssidmask);
- ether_addr_copy(common->macaddr, vif->addr);
+ memcpy(common->macaddr, vif->addr, ETH_ALEN);
common->curaid = 0;
ah->opmode = vif->type;
ah->imask &= ~ATH9K_INT_SWBA;
@@ -1098,7 +1098,7 @@ void ath9k_calculate_summary_state(struc
ath9k_calculate_iter_data(sc, ctx, &iter_data);
if (iter_data.has_hw_macaddr)
- ether_addr_copy(common->macaddr, iter_data.hw_macaddr);
+ memcpy(common->macaddr, iter_data.hw_macaddr, ETH_ALEN);
memcpy(common->bssidmask, iter_data.mask, ETH_ALEN);
ath_hw_setbssidmask(common);
@@ -1785,7 +1785,7 @@ static void ath9k_bss_info_changed(struc
ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n",
bss_conf->bssid, bss_conf->assoc);
- ether_addr_copy(avp->bssid, bss_conf->bssid);
+ memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
avp->aid = bss_conf->aid;
avp->assoc = bss_conf->assoc;

View File

@ -0,0 +1,56 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:21 +0530
Subject: [PATCH] ath9k: Add a function to check for an active GO
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -469,6 +469,7 @@ void ath_chanctx_set_next(struct ath_sof
void ath_offchannel_next(struct ath_softc *sc);
void ath_scan_complete(struct ath_softc *sc, bool abort);
void ath_roc_complete(struct ath_softc *sc, bool abort);
+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc);
#else
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -146,6 +146,36 @@ void ath_chanctx_set_channel(struct ath_
#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
+/*************/
+/* Utilities */
+/*************/
+
+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc)
+{
+ struct ath_chanctx *ctx;
+ struct ath_vif *avp;
+ struct ieee80211_vif *vif;
+
+ spin_lock_bh(&sc->chan_lock);
+
+ ath_for_each_chanctx(sc, ctx) {
+ if (!ctx->active)
+ continue;
+
+ list_for_each_entry(avp, &ctx->vifs, list) {
+ vif = avp->vif;
+
+ if (ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_P2P_GO) {
+ spin_unlock_bh(&sc->chan_lock);
+ return ctx;
+ }
+ }
+ }
+
+ spin_unlock_bh(&sc->chan_lock);
+ return NULL;
+}
+
/**********************************************************/
/* Functions to handle the channel context state machine. */
/**********************************************************/

View File

@ -0,0 +1,134 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:22 +0530
Subject: [PATCH] ath9k: Check for active GO in mgd_prepare_tx()
If a GO interface is active when we receive a
mgd_prepare_tx() call, then we need to send
out a new NoA before switching to a new context.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -385,6 +385,7 @@ struct ath_chanctx_sched {
bool wait_switch;
bool force_noa_update;
bool extend_absence;
+ bool mgd_prepare_tx;
enum ath_chanctx_state state;
u8 beacon_miss;
@@ -977,6 +978,7 @@ struct ath_softc {
struct ath_chanctx_sched sched;
struct ath_offchannel offchannel;
struct ath_chanctx *next_chan;
+ struct completion go_beacon;
#endif
unsigned long driver_data;
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -421,6 +421,9 @@ void ath_chanctx_event(struct ath_softc
"Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n");
}
+ if (sc->sched.mgd_prepare_tx)
+ sc->sched.state = ATH_CHANCTX_STATE_WAIT_FOR_BEACON;
+
/*
* When a context becomes inactive, for example,
* disassociation of a station context, the NoA
@@ -547,6 +550,15 @@ void ath_chanctx_event(struct ath_softc
}
sc->sched.beacon_pending = false;
+
+ if (sc->sched.mgd_prepare_tx) {
+ sc->sched.mgd_prepare_tx = false;
+ complete(&sc->go_beacon);
+ ath_dbg(common, CHAN_CTX,
+ "Beacon sent, complete go_beacon\n");
+ break;
+ }
+
if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON)
break;
@@ -1263,6 +1275,8 @@ void ath9k_init_channel_context(struct a
(unsigned long)sc);
setup_timer(&sc->sched.timer, ath_chanctx_timer,
(unsigned long)sc);
+
+ init_completion(&sc->go_beacon);
}
void ath9k_deinit_channel_context(struct ath_softc *sc)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2474,7 +2474,11 @@ static void ath9k_mgd_prepare_tx(struct
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp = (struct ath_vif *) vif->drv_priv;
+ struct ath_beacon_config *cur_conf;
+ struct ath_chanctx *go_ctx;
+ unsigned long timeout;
bool changed = false;
+ u32 beacon_int;
if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
return;
@@ -2485,19 +2489,46 @@ static void ath9k_mgd_prepare_tx(struct
mutex_lock(&sc->mutex);
spin_lock_bh(&sc->chan_lock);
- if (sc->next_chan || (sc->cur_chan != avp->chanctx)) {
- sc->next_chan = avp->chanctx;
+ if (sc->next_chan || (sc->cur_chan != avp->chanctx))
changed = true;
+ spin_unlock_bh(&sc->chan_lock);
+
+ if (!changed)
+ goto out;
+
+ go_ctx = ath_is_go_chanctx_present(sc);
+
+ if (go_ctx) {
+ /*
+ * Wait till the GO interface gets a chance
+ * to send out an NoA.
+ */
+ spin_lock_bh(&sc->chan_lock);
+ sc->sched.mgd_prepare_tx = true;
+ cur_conf = &go_ctx->beacon;
+ beacon_int = TU_TO_USEC(cur_conf->beacon_interval);
+ spin_unlock_bh(&sc->chan_lock);
+
+ timeout = usecs_to_jiffies(beacon_int);
+ init_completion(&sc->go_beacon);
+
+ if (wait_for_completion_timeout(&sc->go_beacon,
+ timeout) == 0)
+ ath_dbg(common, CHAN_CTX,
+ "Failed to send new NoA\n");
}
+
ath_dbg(common, CHAN_CTX,
- "%s: Set chanctx state to FORCE_ACTIVE, changed: %d\n",
- __func__, changed);
+ "%s: Set chanctx state to FORCE_ACTIVE for vif: %pM\n",
+ __func__, vif->addr);
+
+ spin_lock_bh(&sc->chan_lock);
+ sc->next_chan = avp->chanctx;
sc->sched.state = ATH_CHANCTX_STATE_FORCE_ACTIVE;
spin_unlock_bh(&sc->chan_lock);
- if (changed)
- ath_chanctx_set_next(sc, true);
-
+ ath_chanctx_set_next(sc, true);
+out:
mutex_unlock(&sc->mutex);
}

View File

@ -0,0 +1,68 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:23 +0530
Subject: [PATCH] ath9k: Use a helper function for offchannel NoA
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -366,6 +366,32 @@ static void ath_chanctx_setup_timer(stru
"Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time));
}
+static void ath_chanctx_offchannel_noa(struct ath_softc *sc,
+ struct ath_chanctx *ctx,
+ struct ath_vif *avp,
+ u32 tsf_time)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ avp->noa_index++;
+ avp->offchannel_start = tsf_time;
+ avp->offchannel_duration = sc->sched.offchannel_duration;
+
+ ath_dbg(common, CHAN_CTX,
+ "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n",
+ avp->offchannel_duration,
+ avp->offchannel_start,
+ avp->noa_index);
+
+ /*
+ * When multiple contexts are active, the NoA
+ * has to be recalculated and advertised after
+ * an offchannel operation.
+ */
+ if (ctx->active && avp->noa_duration)
+ avp->noa_duration = 0;
+}
+
void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
enum ath_chanctx_event ev)
{
@@ -461,24 +487,7 @@ void ath_chanctx_event(struct ath_softc
* values and increment the index.
*/
if (sc->next_chan == &sc->offchannel.chan) {
- avp->noa_index++;
- avp->offchannel_start = tsf_time;
- avp->offchannel_duration = sc->sched.offchannel_duration;
-
- ath_dbg(common, CHAN_CTX,
- "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n",
- avp->offchannel_duration,
- avp->offchannel_start,
- avp->noa_index);
-
- /*
- * When multiple contexts are active, the NoA
- * has to be recalculated and advertised after
- * an offchannel operation.
- */
- if (ctx->active && avp->noa_duration)
- avp->noa_duration = 0;
-
+ ath_chanctx_offchannel_noa(sc, ctx, avp, tsf_time);
break;
}

View File

@ -0,0 +1,84 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:24 +0530
Subject: [PATCH] ath9k: Use a helper function to set NoA
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -392,6 +392,39 @@ static void ath_chanctx_offchannel_noa(s
avp->noa_duration = 0;
}
+static void ath_chanctx_set_periodic_noa(struct ath_softc *sc,
+ struct ath_vif *avp,
+ struct ath_beacon_config *cur_conf,
+ u32 tsf_time,
+ u32 beacon_int)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ avp->noa_index++;
+ avp->noa_start = tsf_time;
+
+ if (sc->sched.extend_absence)
+ avp->noa_duration = (3 * beacon_int / 2) +
+ sc->sched.channel_switch_time;
+ else
+ avp->noa_duration =
+ TU_TO_USEC(cur_conf->beacon_interval) / 2 +
+ sc->sched.channel_switch_time;
+
+ if (test_bit(ATH_OP_SCANNING, &common->op_flags) ||
+ sc->sched.extend_absence)
+ avp->periodic_noa = false;
+ else
+ avp->periodic_noa = true;
+
+ ath_dbg(common, CHAN_CTX,
+ "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
+ avp->noa_duration,
+ avp->noa_start,
+ avp->noa_index,
+ avp->periodic_noa);
+}
+
void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
enum ath_chanctx_event ev)
{
@@ -521,31 +554,9 @@ void ath_chanctx_event(struct ath_softc
* announcement.
*/
if (ctx->active &&
- (!avp->noa_duration || sc->sched.force_noa_update)) {
- avp->noa_index++;
- avp->noa_start = tsf_time;
-
- if (sc->sched.extend_absence)
- avp->noa_duration = (3 * beacon_int / 2) +
- sc->sched.channel_switch_time;
- else
- avp->noa_duration =
- TU_TO_USEC(cur_conf->beacon_interval) / 2 +
- sc->sched.channel_switch_time;
-
- if (test_bit(ATH_OP_SCANNING, &common->op_flags) ||
- sc->sched.extend_absence)
- avp->periodic_noa = false;
- else
- avp->periodic_noa = true;
-
- ath_dbg(common, CHAN_CTX,
- "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
- avp->noa_duration,
- avp->noa_start,
- avp->noa_index,
- avp->periodic_noa);
- }
+ (!avp->noa_duration || sc->sched.force_noa_update))
+ ath_chanctx_set_periodic_noa(sc, avp, cur_conf,
+ tsf_time, beacon_int);
if (ctx->active && sc->sched.force_noa_update)
sc->sched.force_noa_update = false;

View File

@ -0,0 +1,68 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:25 +0530
Subject: [PATCH] ath9k: Use a helper function for bmiss
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -366,6 +366,31 @@ static void ath_chanctx_setup_timer(stru
"Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time));
}
+static void ath_chanctx_handle_bmiss(struct ath_softc *sc,
+ struct ath_chanctx *ctx,
+ struct ath_vif *avp)
+{
+ /*
+ * Clear the extend_absence flag if it had been
+ * set during the previous beacon transmission,
+ * since we need to revert to the normal NoA
+ * schedule.
+ */
+ if (ctx->active && sc->sched.extend_absence) {
+ avp->noa_duration = 0;
+ sc->sched.extend_absence = false;
+ }
+
+ /* If at least two consecutive beacons were missed on the STA
+ * chanctx, stay on the STA channel for one extra beacon period,
+ * to resync the timer properly.
+ */
+ if (ctx->active && sc->sched.beacon_miss >= 2) {
+ avp->noa_duration = 0;
+ sc->sched.extend_absence = true;
+ }
+}
+
static void ath_chanctx_offchannel_noa(struct ath_softc *sc,
struct ath_chanctx *ctx,
struct ath_vif *avp,
@@ -524,25 +549,7 @@ void ath_chanctx_event(struct ath_softc
break;
}
- /*
- * Clear the extend_absence flag if it had been
- * set during the previous beacon transmission,
- * since we need to revert to the normal NoA
- * schedule.
- */
- if (ctx->active && sc->sched.extend_absence) {
- avp->noa_duration = 0;
- sc->sched.extend_absence = false;
- }
-
- /* If at least two consecutive beacons were missed on the STA
- * chanctx, stay on the STA channel for one extra beacon period,
- * to resync the timer properly.
- */
- if (ctx->active && sc->sched.beacon_miss >= 2) {
- avp->noa_duration = 0;
- sc->sched.extend_absence = true;
- }
+ ath_chanctx_handle_bmiss(sc, ctx, avp);
/* Prevent wrap-around issues */
if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30))

View File

@ -0,0 +1,38 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:26 +0530
Subject: [PATCH] ath9k: Fix RoC expiration
mac80211 has to be notified when a RoC period
expires in the driver. In MCC mode, since the
offchannel/RoC timer is set with the requested
duration, ieee80211_remain_on_channel_expired() needs
to be called when the timer expires.
But, currently it is done after we move back to
the operating channel. This is incorrect - fix this
by calling ieee80211_remain_on_channel_expired() when
the RoC timer expires and in ath_roc_complete() when
the RoC request is aborted.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -894,7 +894,7 @@ void ath_roc_complete(struct ath_softc *
sc->offchannel.roc_vif = NULL;
sc->offchannel.roc_chan = NULL;
- if (!abort)
+ if (abort)
ieee80211_remain_on_channel_expired(sc->hw);
ath_offchannel_next(sc);
ath9k_ps_restore(sc);
@@ -1028,6 +1028,7 @@ static void ath_offchannel_timer(unsigne
case ATH_OFFCHANNEL_ROC_WAIT:
ctx = ath_chanctx_get_oper_chan(sc, false);
sc->offchannel.state = ATH_OFFCHANNEL_ROC_DONE;
+ ieee80211_remain_on_channel_expired(sc->hw);
ath_chanctx_switch(sc, ctx, NULL);
break;
default:

View File

@ -0,0 +1,85 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:27 +0530
Subject: [PATCH] ath9k: Send oneshot NoA
This patch makes sure that a GO interface
sends out a new NoA schedule with 200ms duration
when mgd_prepare_tx() is called.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -620,6 +620,7 @@ struct ath_vif {
u32 noa_start;
u32 noa_duration;
bool periodic_noa;
+ bool oneshot_noa;
};
struct ath9k_vif_iter_data {
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -450,6 +450,27 @@ static void ath_chanctx_set_periodic_noa
avp->periodic_noa);
}
+static void ath_chanctx_set_oneshot_noa(struct ath_softc *sc,
+ struct ath_vif *avp,
+ u32 tsf_time,
+ u32 duration)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ avp->noa_index++;
+ avp->noa_start = tsf_time;
+ avp->periodic_noa = false;
+ avp->oneshot_noa = true;
+ avp->noa_duration = duration + sc->sched.channel_switch_time;
+
+ ath_dbg(common, CHAN_CTX,
+ "oneshot noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
+ avp->noa_duration,
+ avp->noa_start,
+ avp->noa_index,
+ avp->periodic_noa);
+}
+
void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
enum ath_chanctx_event ev)
{
@@ -476,6 +497,14 @@ void ath_chanctx_event(struct ath_softc
if (avp->offchannel_duration)
avp->offchannel_duration = 0;
+ if (avp->oneshot_noa) {
+ avp->noa_duration = 0;
+ avp->oneshot_noa = false;
+
+ ath_dbg(common, CHAN_CTX,
+ "Clearing oneshot NoA\n");
+ }
+
if (avp->chanctx != sc->cur_chan) {
ath_dbg(common, CHAN_CTX,
"Contexts differ, not preparing beacon\n");
@@ -551,6 +580,18 @@ void ath_chanctx_event(struct ath_softc
ath_chanctx_handle_bmiss(sc, ctx, avp);
+ /*
+ * If a mgd_prepare_tx() has been called by mac80211,
+ * a one-shot NoA needs to be sent. This can happen
+ * with one or more active channel contexts - in both
+ * cases, a new NoA schedule has to be advertised.
+ */
+ if (sc->sched.mgd_prepare_tx) {
+ ath_chanctx_set_oneshot_noa(sc, avp, tsf_time,
+ jiffies_to_usecs(HZ / 5));
+ break;
+ }
+
/* Prevent wrap-around issues */
if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30))
avp->noa_duration = 0;

View File

@ -0,0 +1,68 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:28 +0530
Subject: [PATCH] ath9k: Fix HW scan abort
Instead of using ATH_CHANCTX_EVENT_ASSIGN to abort
a HW scan when a new interface becomes active, use the
mgd_prepare_tx() callback. This allows us to make
sure that the GO's channel becomes operational by
using flush_work().
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -743,22 +743,6 @@ void ath_chanctx_event(struct ath_softc
ieee80211_queue_work(sc->hw, &sc->chanctx_work);
break;
case ATH_CHANCTX_EVENT_ASSIGN:
- /*
- * When adding a new channel context, check if a scan
- * is in progress and abort it since the addition of
- * a new channel context is usually followed by VIF
- * assignment, in which case we have to start multi-channel
- * operation.
- */
- if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
- ath_dbg(common, CHAN_CTX,
- "Aborting HW scan to add new context\n");
-
- spin_unlock_bh(&sc->chan_lock);
- del_timer_sync(&sc->offchannel.timer);
- ath_scan_complete(sc, true);
- spin_lock_bh(&sc->chan_lock);
- }
break;
case ATH_CHANCTX_EVENT_CHANGE:
break;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2365,7 +2365,6 @@ static int ath9k_add_chanctx(struct ieee
conf->def.chan->center_freq);
ath_chanctx_set_channel(sc, ctx, &conf->def);
- ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_ASSIGN);
mutex_unlock(&sc->mutex);
return 0;
@@ -2496,6 +2495,19 @@ static void ath9k_mgd_prepare_tx(struct
if (!changed)
goto out;
+ if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
+ ath_dbg(common, CHAN_CTX,
+ "%s: Aborting HW scan\n", __func__);
+
+ mutex_unlock(&sc->mutex);
+
+ del_timer_sync(&sc->offchannel.timer);
+ ath_scan_complete(sc, true);
+ flush_work(&sc->chanctx_work);
+
+ mutex_lock(&sc->mutex);
+ }
+
go_ctx = ath_is_go_chanctx_present(sc);
if (go_ctx) {

View File

@ -0,0 +1,95 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:29 +0530
Subject: [PATCH] ath9k: Improve flush() in mcc mode
The flush timeout in MCC mode is very small, since
we are constrained by the time slice for each
channel context, but since only the HW queues are
flushed when switching contexts, it is acceptable.
Since the SW queues are also emptied in the mac80211 flush()
callback, a larger duration is needed. Add an override
argument to __ath9k_flush() and set it when flush()
is called in MCC mode. This allows the driver to
drain both the SW and HW queues.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -719,7 +719,7 @@ void ath_update_survey_nf(struct ath_sof
void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type);
void ath_ps_full_sleep(unsigned long data);
void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
- bool sw_pending);
+ bool sw_pending, bool timeout_override);
/**********/
/* BTCOEX */
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -1232,11 +1232,11 @@ void ath_chanctx_set_next(struct ath_sof
ath9k_chanctx_stop_queues(sc, sc->cur_chan);
queues_stopped = true;
- __ath9k_flush(sc->hw, ~0, true, false);
+ __ath9k_flush(sc->hw, ~0, true, false, false);
if (ath_chanctx_send_ps_frame(sc, true))
__ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO),
- false, false);
+ false, false, false);
send_ps = true;
spin_lock_bh(&sc->chan_lock);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2031,14 +2031,33 @@ static void ath9k_flush(struct ieee80211
u32 queues, bool drop)
{
struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ if (ath9k_is_chanctx_enabled()) {
+ if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
+ goto flush;
+ /*
+ * If MCC is active, extend the flush timeout
+ * and wait for the HW/SW queues to become
+ * empty. This needs to be done outside the
+ * sc->mutex lock to allow the channel scheduler
+ * to switch channel contexts.
+ *
+ * The vif queues have been stopped in mac80211,
+ * so there won't be any incoming frames.
+ */
+ __ath9k_flush(hw, queues, drop, true, true);
+ return;
+ }
+flush:
mutex_lock(&sc->mutex);
- __ath9k_flush(hw, queues, drop, true);
+ __ath9k_flush(hw, queues, drop, true, false);
mutex_unlock(&sc->mutex);
}
void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
- bool sw_pending)
+ bool sw_pending, bool timeout_override)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
@@ -2059,7 +2078,10 @@ void __ath9k_flush(struct ieee80211_hw *
}
spin_lock_bh(&sc->chan_lock);
- timeout = sc->cur_chan->flush_timeout;
+ if (timeout_override)
+ timeout = HZ / 5;
+ else
+ timeout = sc->cur_chan->flush_timeout;
spin_unlock_bh(&sc->chan_lock);
ath_dbg(common, CHAN_CTX,

View File

@ -0,0 +1,60 @@
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 17 Oct 2014 07:40:30 +0530
Subject: [PATCH] ath9k: Do not start BA when scanning
mac80211 currently has a race which can be hit
with this sequence:
* Start a scan operation.
* TX BA is initiated by ieee80211_start_tx_ba_session().
* Driver sets up internal state and calls
ieee80211_start_tx_ba_cb_irqsafe().
* mac80211 adds a packet to sdata->skb_queue with
type IEEE80211_SDATA_QUEUE_AGG_START.
* ieee80211_iface_work() doesn't process the
packet because scan is in progress.
* ADDBA response timer expires and the sta/tid is
torn down.
* Driver receives BA stop notification and calls
ieee80211_stop_tx_ba_cb_irqsafe().
* This is also added to the queue by mac80211.
* Now, scan finishes.
At this point, the queued up packets might be processed
if some other operation schedules the sdata work. Since
the tids have been cleaned up already, warnings are hit.
If this doesn't happen, the packets are left in the queue
until the interface is torn down.
Since initiating a BA session when scan is in progress
leads to flaky connections, especially in MCC mode, we
can drop the TX BA request. This improves connectivity
with legacy clients in MCC mode.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1885,6 +1885,7 @@ static int ath9k_ampdu_action(struct iee
u16 tid, u16 *ssn, u8 buf_size)
{
struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
bool flush = false;
int ret = 0;
@@ -1896,6 +1897,12 @@ static int ath9k_ampdu_action(struct iee
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
+ if (ath9k_is_chanctx_enabled()) {
+ if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
+ ret = -EBUSY;
+ break;
+ }
+ }
ath9k_ps_wakeup(sc);
ret = ath_tx_aggr_start(sc, sta, tid, ssn);
if (!ret)

View File

@ -1,3 +1,13 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:23:34 +0200
Subject: [PATCH] ath9k_hw: make support for PC-OEM cards optional
The initvals use up quite a bit of space, and PC-OEM support is
typically not needed on embedded systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -151,6 +151,11 @@ config ATH9K_CHANNEL_CONTEXT
@ -84,7 +94,7 @@
#endif
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -245,13 +245,20 @@ enum ath9k_hw_caps {
@@ -244,13 +244,20 @@ enum ath9k_hw_caps {
ATH9K_HW_CAP_2GHZ = BIT(11),
ATH9K_HW_CAP_5GHZ = BIT(12),
ATH9K_HW_CAP_APM = BIT(13),
@ -167,8 +177,8 @@
.driver_data = ATH9K_PCI_BT_ANT_DIV },
+#endif
{ PCI_VDEVICE(ATHEROS, 0xabcd) }, /* PCI-E internal chip default ID */
{ 0 }
};
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -892,10 +892,21 @@

View File

@ -1,3 +1,13 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:25:26 +0200
Subject: [PATCH] ath9k_hw: remove support for UB124 tx gain table
UB124 is a USB based reference design not supported by ath9k or
ath9k_htc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -670,9 +670,6 @@ static void ar9003_tx_gain_table_mode5(s

View File

@ -0,0 +1,33 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:31:52 +0200
Subject: [PATCH] ath9k: fix processing RXORN interrupts
The "goto chip_reset" is a bit misleading, because it does not actually
issue a chip reset. Instead it is bypassing processing of other
interrupts and assumes that the tasklet will issue a chip reset.
In the case of RXORN this does not happen, so bypassing processing of
other interrupts will simply allow them to fire again. Even if RXORN
was triggering a reset, it is not critical enough to need the bypass
here.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -545,11 +545,10 @@ irqreturn_t ath_isr(int irq, void *dev)
sched = true;
/*
- * If a FATAL or RXORN interrupt is received, we have to reset the
- * chip immediately.
+ * If a FATAL interrupt is received, we have to reset the chip
+ * immediately.
*/
- if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
- !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
+ if (status & ATH9K_INT_FATAL)
goto chip_reset;
if ((ah->config.hw_hang_checks & HW_BB_WATCHDOG) &&

View File

@ -1,3 +1,12 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:36:41 +0200
Subject: [PATCH] ath9k: clean up debugfs print of reset causes
Reduce code duplication
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -852,36 +852,30 @@ static ssize_t read_file_reset(struct fi

View File

@ -1,3 +1,76 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:37:32 +0200
Subject: [PATCH] ath9k: restart hardware after noise floor calibration
failure
When NF calibration fails, the radio often becomes deaf. The usual
hardware hang checks do not detect this, so it's better to issue a reset
when that happens.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -657,14 +657,13 @@ static void ar9002_hw_olc_temp_compensat
ar9280_hw_olc_temp_compensation(ah);
}
-static bool ar9002_hw_calibrate(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u8 rxchainmask,
- bool longcal)
+static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
+ u8 rxchainmask, bool longcal)
{
bool iscaldone = true;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
bool nfcal, nfcal_pending = false;
+ int ret;
nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF);
if (ah->caldata)
@@ -698,7 +697,9 @@ static bool ar9002_hw_calibrate(struct a
* NF is slow time-variant, so it is OK to use a
* historical value.
*/
- ath9k_hw_loadnf(ah, ah->curchan);
+ ret = ath9k_hw_loadnf(ah, ah->curchan);
+ if (ret < 0)
+ return ret;
}
if (longcal) {
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -121,13 +121,12 @@ static bool ar9003_hw_per_calibration(st
return iscaldone;
}
-static bool ar9003_hw_calibrate(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u8 rxchainmask,
- bool longcal)
+static int ar9003_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
+ u8 rxchainmask, bool longcal)
{
bool iscaldone = true;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
+ int ret;
/*
* For given calibration:
@@ -163,7 +162,9 @@ static bool ar9003_hw_calibrate(struct a
* NF is slow time-variant, so it is OK to use a historical
* value.
*/
- ath9k_hw_loadnf(ah, ah->curchan);
+ ret = ath9k_hw_loadnf(ah, ah->curchan);
+ if (ret < 0)
+ return ret;
/* start NF calibration, without updating BB NF register */
ath9k_hw_start_nfcal(ah, false);
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -234,7 +234,7 @@ void ath9k_hw_start_nfcal(struct ath_hw
@ -38,37 +111,26 @@
bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
struct ath9k_channel *chan);
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -657,14 +657,13 @@ static void ar9002_hw_olc_temp_compensat
ar9280_hw_olc_temp_compensation(ah);
}
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -863,6 +863,7 @@ static ssize_t read_file_reset(struct fi
[RESET_TYPE_MAC_HANG] = "MAC Hang",
[RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
[RESET_TYPE_MCI] = "MCI Reset",
+ [RESET_TYPE_CALIBRATION] = "Calibration error",
};
char buf[512];
unsigned int len = 0;
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -49,6 +49,7 @@ enum ath_reset_type {
RESET_TYPE_MAC_HANG,
RESET_TYPE_BEACON_STUCK,
RESET_TYPE_MCI,
+ RESET_TYPE_CALIBRATION,
__RESET_TYPE_MAX
};
-static bool ar9002_hw_calibrate(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u8 rxchainmask,
- bool longcal)
+static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
+ u8 rxchainmask, bool longcal)
{
bool iscaldone = true;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
bool nfcal, nfcal_pending = false;
+ int ret;
nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF);
if (ah->caldata)
@@ -698,7 +697,9 @@ static bool ar9002_hw_calibrate(struct a
* NF is slow time-variant, so it is OK to use a
* historical value.
*/
- ath9k_hw_loadnf(ah, ah->curchan);
+ ret = ath9k_hw_loadnf(ah, ah->curchan);
+ if (ret < 0)
+ return ret;
}
if (longcal) {
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -41,10 +41,9 @@ static inline void ath9k_hw_set_desc_lin
@ -85,39 +147,9 @@
{
return ath9k_hw_ops(ah)->calibrate(ah, chan, rxchainmask, longcal);
}
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -121,13 +121,12 @@ static bool ar9003_hw_per_calibration(st
return iscaldone;
}
-static bool ar9003_hw_calibrate(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u8 rxchainmask,
- bool longcal)
+static int ar9003_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
+ u8 rxchainmask, bool longcal)
{
bool iscaldone = true;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
+ int ret;
/*
* For given calibration:
@@ -163,7 +162,9 @@ static bool ar9003_hw_calibrate(struct a
* NF is slow time-variant, so it is OK to use a historical
* value.
*/
- ath9k_hw_loadnf(ah, ah->curchan);
+ ret = ath9k_hw_loadnf(ah, ah->curchan);
+ if (ret < 0)
+ return ret;
/* start NF calibration, without updating BB NF register */
ath9k_hw_start_nfcal(ah, false);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -696,10 +696,8 @@ struct ath_hw_ops {
@@ -688,10 +688,8 @@ struct ath_hw_ops {
bool power_off);
void (*rx_enable)(struct ath_hw *ah);
void (*set_desc_link)(void *ds, u32 link);
@ -130,26 +162,6 @@
bool (*get_isr)(struct ath_hw *ah, enum ath9k_int *masked,
u32 *sync_cause_p);
void (*set_txdesc)(struct ath_hw *ah, void *ds,
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -49,6 +49,7 @@ enum ath_reset_type {
RESET_TYPE_MAC_HANG,
RESET_TYPE_BEACON_STUCK,
RESET_TYPE_MCI,
+ RESET_TYPE_CALIBRATION,
__RESET_TYPE_MAX
};
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -863,6 +863,7 @@ static ssize_t read_file_reset(struct fi
[RESET_TYPE_MAC_HANG] = "MAC Hang",
[RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
[RESET_TYPE_MCI] = "MCI Reset",
+ [RESET_TYPE_CALIBRATION] = "Calibration error",
};
char buf[512];
unsigned int len = 0;
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -371,9 +371,14 @@ void ath_ani_calibrate(unsigned long dat

View File

@ -1,3 +1,14 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:39:11 +0200
Subject: [PATCH] ath9k_hw: do not run NF and periodic calibration at the
same time
It can cause inconsistent calibration results or in some cases turn the
radio deaf.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -660,7 +660,6 @@ static void ar9002_hw_olc_temp_compensat

View File

@ -1,3 +1,13 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 13:42:03 +0200
Subject: [PATCH] ath9k_hw: start initial NF calibration after PA
calibration on <AR9003
This makes the initial NF calibration less likely to fail.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -854,6 +854,7 @@ static bool ar9002_hw_init_cal(struct at
@ -10,7 +20,7 @@
set_bit(NFCAL_PENDING, &ah->caldata->cal_flags);
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1997,8 +1997,10 @@ int ath9k_hw_reset(struct ath_hw *ah, st
@@ -1953,8 +1953,10 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_check_bt(ah);

View File

@ -1,3 +1,15 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 18:24:15 +0200
Subject: [PATCH] ath9k: add support for endian swap of eeprom from
platform data
On some devices (especially little-endian ones), the flash EEPROM data
has a different endian, which needs to be detected.
Add a flag to the platform data to allow overriding that behavior
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -262,7 +262,7 @@ static int ath9k_hw_def_check_eeprom(str
@ -47,31 +59,9 @@
}
}
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -57,7 +57,7 @@ static bool ath9k_hw_4k_fill_eeprom(stru
{
struct ath_common *common = ath9k_hw_common(ah);
- if (!ath9k_hw_use_flash(ah)) {
+ if (!(ah->ah_flags & AH_NO_EEP_SWAP)) {
ath_dbg(common, EEPROM, "Reading from EEPROM, not flash\n");
}
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -60,7 +60,7 @@ static bool ath9k_hw_ar9287_fill_eeprom(
{
struct ath_common *common = ath9k_hw_common(ah);
- if (!ath9k_hw_use_flash(ah)) {
+ if (!(ah->ah_flags & AH_NO_EEP_SWAP)) {
ath_dbg(common, EEPROM, "Reading from EEPROM, not flash\n");
}
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -726,6 +726,7 @@ enum ath_cal_list {
@@ -731,6 +731,7 @@ enum ath_cal_list {
#define AH_USE_EEPROM 0x1
#define AH_UNPLUGGED 0x2 /* The card has been physically removed. */
#define AH_FASTCC 0x4
@ -81,7 +71,7 @@
struct ath_ops reg_ops;
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -528,6 +528,8 @@ static int ath9k_init_softc(u16 devid, s
@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s
ah->is_clk_25mhz = pdata->is_clk_25mhz;
ah->get_mac_revision = pdata->get_mac_revision;
ah->external_reset = pdata->external_reset;

View File

@ -1,17 +1,18 @@
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -34,6 +34,8 @@ struct ath9k_platform_data {
bool endian_check;
bool is_clk_25mhz;
bool tx_gain_buffalo;
+ bool disable_2ghz;
+ bool disable_5ghz;
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 18:27:23 +0200
Subject: [PATCH] ath9k: allow disabling bands via platform data
Some devices have multiple bands enables in the EEPROM data, even though
they are only calibrated for one. Allow platform data to disable
unsupported bands.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
int (*get_mac_revision)(void);
int (*external_reset)(void);
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2362,17 +2362,25 @@ int ath9k_hw_fill_cap_info(struct ath_hw
@@ -2344,17 +2344,25 @@ int ath9k_hw_fill_cap_info(struct ath_hw
}
eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
@ -47,7 +48,7 @@
AR_SREV_9285(ah) ||
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -934,6 +934,8 @@ struct ath_hw {
@@ -930,6 +930,8 @@ struct ath_hw {
bool is_clk_25mhz;
int (*get_mac_revision)(void);
int (*external_reset)(void);
@ -58,7 +59,7 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -528,6 +528,8 @@ static int ath9k_init_softc(u16 devid, s
@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s
ah->is_clk_25mhz = pdata->is_clk_25mhz;
ah->get_mac_revision = pdata->get_mac_revision;
ah->external_reset = pdata->external_reset;
@ -67,3 +68,14 @@
if (!pdata->endian_check)
ah->ah_flags |= AH_NO_EEP_SWAP;
}
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -34,6 +34,8 @@ struct ath9k_platform_data {
bool endian_check;
bool is_clk_25mhz;
bool tx_gain_buffalo;
+ bool disable_2ghz;
+ bool disable_5ghz;
int (*get_mac_revision)(void);
int (*external_reset)(void);

View File

@ -1,3 +1,13 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 18 Oct 2014 18:31:49 +0200
Subject: [PATCH] ath9k: use a random MAC address if the EEPROM address
is invalid
Based on OpenWrt patch by Gabor Juhos
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -19,6 +19,7 @@

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -13,8 +13,8 @@ ath-objs := main.o \
@@ -13,10 +13,10 @@ ath-objs := main.o \
regd.o \
hw.o \
key.o \
@ -9,10 +9,12 @@
dfs_pri_detector.o
-ath-$(CPTCFG_ATH_DEBUG) += debug.o
ath-$(CPTCFG_ATH_TRACEPOINTS) += trace.o
ccflags-y += -D__CHECK_ENDIAN__
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -299,13 +299,6 @@ void _ath_dbg(struct ath_common *common,
@@ -300,13 +300,6 @@ void _ath_dbg(struct ath_common *common,
#endif /* CPTCFG_ATH_DEBUG */
/** Returns string describing opmode, or NULL if unknown mode. */

View File

@ -63,6 +63,6 @@
ATH_CARDS=
ATH_DEBUG=
+ATH_USER_REGD=
ATH_TRACEPOINTS=
ATH_REG_DYNAMIC_USER_REG_HINTS=
ATH_REG_DYNAMIC_USER_CERT_TESTING=
ATH5K=

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -670,6 +670,7 @@ static const struct ieee80211_iface_limi
@@ -677,6 +677,7 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_AP) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) },

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1318,6 +1318,53 @@ void ath9k_deinit_debug(struct ath_softc
@@ -1313,6 +1313,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_spectral_deinit_debug(sc);
}
@ -54,7 +54,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1337,6 +1384,8 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1332,6 +1379,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_spectral_init_debug(sc);

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -976,23 +976,23 @@ static int __init ath9k_init(void)
@@ -981,23 +981,23 @@ static int __init ath9k_init(void)
{
int error;

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1365,6 +1365,52 @@ static const struct file_operations fops
@@ -1360,6 +1360,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
@ -53,7 +53,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1386,6 +1432,8 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1381,6 +1427,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);

View File

@ -20,9 +20,9 @@
#define AR9160_DEVID_PCI 0x0027
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -658,6 +658,7 @@ static const struct pci_device_id ath_pc
{ PCI_VDEVICE(ATHEROS, 0x0036),
@@ -664,6 +664,7 @@ static const struct pci_device_id ath_pc
.driver_data = ATH9K_PCI_BT_ANT_DIV },
#endif
+ { PCI_VDEVICE(ATHEROS, 0xabcd) }, /* PCI-E internal chip default ID */
{ 0 }

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -323,8 +323,12 @@ int ath_reset_internal(struct ath_softc
@@ -326,8 +326,12 @@ static int ath_reset_internal(struct ath
sc->cur_chan->offchannel)
ath9k_mci_set_txpower(sc, true, false);
@ -14,7 +14,7 @@
out:
spin_unlock_bh(&sc->sc_pcu_lock);
@@ -1453,6 +1457,7 @@ static int ath9k_config(struct ieee80211
@@ -1470,6 +1474,7 @@ static int ath9k_config(struct ieee80211
sc->cur_chan->txpower = 2 * conf->power_level;
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->cur_chan->txpower, &sc->curtxpow);

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -799,6 +799,9 @@ static inline int ath9k_dump_btcoex(stru
@@ -811,6 +811,9 @@ static inline int ath9k_dump_btcoex(stru
void ath_init_leds(struct ath_softc *sc);
void ath_deinit_leds(struct ath_softc *sc);
void ath_fill_led_pin(struct ath_softc *sc);
@ -10,7 +10,7 @@
#else
static inline void ath_init_leds(struct ath_softc *sc)
{
@@ -939,6 +942,13 @@ void ath_ant_comb_scan(struct ath_softc
@@ -951,6 +954,13 @@ void ath_ant_comb_scan(struct ath_softc
#define ATH9K_NUM_CHANCTX 2 /* supports 2 operating channels */
@ -24,7 +24,7 @@
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
@@ -990,9 +1000,8 @@ struct ath_softc {
@@ -1003,9 +1013,8 @@ struct ath_softc {
spinlock_t chan_lock;
#ifdef CPTCFG_MAC80211_LEDS
@ -162,7 +162,7 @@
void ath_fill_led_pin(struct ath_softc *sc)
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -889,7 +889,7 @@ int ath9k_init_device(u16 devid, struct
@@ -894,7 +894,7 @@ int ath9k_init_device(u16 devid, struct
#ifdef CPTCFG_MAC80211_LEDS
/* must be initialized before ieee80211_register_hw */
@ -173,7 +173,7 @@
#endif
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1410,6 +1410,61 @@ static const struct file_operations fops
@@ -1405,6 +1405,61 @@ static const struct file_operations fops
.llseek = default_llseek,
};
@ -235,7 +235,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
@@ -1434,6 +1489,10 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1429,6 +1484,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_eeprom);
debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_chanbw);

View File

@ -1,6 +1,6 @@
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -39,6 +39,9 @@ struct ath9k_platform_data {
@@ -41,6 +41,9 @@ struct ath9k_platform_data {
int (*external_reset)(void);
bool use_eeprom;

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1466,6 +1466,50 @@ static const struct file_operations fops
@@ -1461,6 +1461,50 @@ static const struct file_operations fops
#endif
@ -51,7 +51,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1493,6 +1537,8 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1488,6 +1532,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("gpio_led", S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_gpio_led);
#endif
@ -62,7 +62,7 @@
debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy, sc,
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -483,6 +483,12 @@ enum {
@@ -490,6 +490,12 @@ enum {
ATH9K_RESET_COLD,
};
@ -75,7 +75,7 @@
struct ath9k_hw_version {
u32 magic;
u16 devid;
@@ -764,6 +770,8 @@ struct ath_hw {
@@ -769,6 +775,8 @@ struct ath_hw {
u32 rfkill_polarity;
u32 ah_flags;
@ -84,7 +84,7 @@
bool reset_power_on;
bool htc_reset_init;
@@ -1018,6 +1026,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
@@ -1025,6 +1033,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
@ -115,7 +115,7 @@
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata, bool fastcc)
{
@@ -1968,6 +1982,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
@@ -1970,6 +1984,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ar9003_hw_disable_phy_restart(ah);
ath9k_hw_apply_gpio_override(ah);
@ -125,7 +125,7 @@
REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -531,6 +531,11 @@ irqreturn_t ath_isr(int irq, void *dev)
@@ -535,6 +535,11 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_debug_sync_cause(sc, sync_cause);
status &= ah->imask; /* discard unasked-for bits */

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -679,6 +679,7 @@ struct ath_spec_scan {
@@ -686,6 +686,7 @@ struct ath_spec_scan {
* @config_pci_powersave:
* @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC
*
@ -8,7 +8,7 @@
* @spectral_scan_config: set parameters for spectral scan and enable/disable it
* @spectral_scan_trigger: trigger a spectral scan run
* @spectral_scan_wait: wait for a spectral scan run to finish
@@ -703,6 +704,7 @@ struct ath_hw_ops {
@@ -708,6 +709,7 @@ struct ath_hw_ops {
struct ath_hw_antcomb_conf *antconf);
void (*antdiv_comb_conf_set)(struct ath_hw *ah,
struct ath_hw_antcomb_conf *antconf);
@ -55,7 +55,7 @@
ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -662,7 +662,8 @@ static void ath9k_init_txpower_limits(st
@@ -665,7 +665,8 @@ static void ath9k_init_txpower_limits(st
if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
@ -65,7 +65,7 @@
}
static const struct ieee80211_iface_limit if_limits[] = {
@@ -848,6 +849,18 @@ static void ath9k_set_hw_capab(struct at
@@ -851,6 +852,18 @@ static void ath9k_set_hw_capab(struct at
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
@ -84,7 +84,7 @@
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
@@ -896,6 +909,8 @@ int ath9k_init_device(u16 devid, struct
@@ -899,6 +912,8 @@ int ath9k_init_device(u16 devid, struct
ARRAY_SIZE(ath9k_tpt_blink));
#endif
@ -95,7 +95,7 @@
if (error)
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -101,6 +101,12 @@ static inline void ath9k_hw_tx99_set_txp
@@ -100,6 +100,12 @@ static inline void ath9k_hw_tx99_set_txp
ath9k_hw_ops(ah)->tx99_set_txpower(ah, power);
}

View File

@ -55,7 +55,7 @@
return -EINVAL;
}
@@ -1993,6 +2018,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
@@ -1995,6 +2020,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_set_radar_params(ah);
}

View File

@ -1,12 +0,0 @@
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -553,8 +553,7 @@ irqreturn_t ath_isr(int irq, void *dev)
* If a FATAL or RXORN interrupt is received, we have to reset the
* chip immediately.
*/
- if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
- !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
+ if (status & ATH9K_INT_FATAL)
goto chip_reset;
if ((ah->config.hw_hang_checks & HW_BB_WATCHDOG) &&

View File

@ -1,6 +1,6 @@
--- a/.local-symbols
+++ b/.local-symbols
@@ -284,6 +284,7 @@ RT2X00_LIB_FIRMWARE=
@@ -285,6 +285,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=