experimental support for 2.6.27

SVN-Revision: 12932
2024-12-29 18:19:02 +00:00 · 2008-10-09 08:08:13 +00:00 · 2008-10-09 08:08:13 +00:00 · efc3f8a1ef
commit efc3f8a1ef
parent 1f819de60e
11 changed files with 595 additions and 0 deletions
--- a/target/linux/atheros/config-2.6.27
+++ b/target/linux/atheros/config-2.6.27
@ -0,0 +1,235 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_AR2313=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_AR5315=y
+CONFIG_ATHEROS_AR5315_PCI=y
+CONFIG_ATHEROS_WDT=y
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BT is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIO_DEVICE=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_CLK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HERMES is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+CONFIG_ICPLUS_PHY=y
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_SPIFLASH=y
+CONFIG_MVSWITCH_PHY=y
+# CONFIG_NET_PCI is not set
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_WDM=m
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/atheros/patches-2.6.27/100-board.patch
+++ b/target/linux/atheros/patches-2.6.27/100-board.patch
@ -0,0 +1,66 @@
+--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
+@@ -59,6 +59,18 @@
+ 	help
+ 	 Support for BCM47XX based boards
+ 
+config ATHEROS
+	bool "Atheros SoC support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select GENERIC_GPIO
+
+ config MIPS_COBALT
+ 	bool "Cobalt Server"
+ 	select CEVT_R4K
+@@ -598,6 +610,7 @@
+ 
+ endchoice
+ 
+source "arch/mips/atheros/Kconfig"
+ source "arch/mips/au1000/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
+@@ -276,6 +276,13 @@
+ load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
+ 
+ #
+# Atheros AR5312/AR2312 WiSoC
+#
+core-$(CONFIG_ATHEROS)		+= arch/mips/atheros/
+cflags-$(CONFIG_ATHEROS)	+= -Iinclude/asm-mips/mach-atheros
+load-$(CONFIG_ATHEROS)		+= 0xffffffff80041000
+
+#
+ # Cobalt Server
+ #
+ core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
+--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
+@@ -57,6 +57,18 @@
+ #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
+ #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+ 
+/*
+ * Valid machtype for group ATHEROS
+ */
+#define MACH_GROUP_ATHEROS	26
+#define MACH_ATHEROS_AR5312	0
+#define MACH_ATHEROS_AR2312	1
+#define MACH_ATHEROS_AR2313	2
+#define MACH_ATHEROS_AR2315	3
+#define MACH_ATHEROS_AR2316	4
+#define MACH_ATHEROS_AR2317	5
+#define MACH_ATHEROS_AR2318	6
+
+ #define CL_SIZE			COMMAND_LINE_SIZE
+ 
+ extern char *system_type;
--- a/target/linux/atheros/patches-2.6.27/110-spiflash.patch
+++ b/target/linux/atheros/patches-2.6.27/110-spiflash.patch
@ -0,0 +1,20 @@
+--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
+@@ -83,6 +83,10 @@
+ 	help
+ 	  This option enables FAST_READ access supported by ST M25Pxx.
+ 
+config MTD_SPIFLASH
+	tristate "Atheros AR2315/6/7 SPI Flash support"
+	depends on ATHEROS_AR5315
+
+ config MTD_SLRAM
+ 	tristate "Uncached system RAM"
+ 	help
+--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,4 @@
+ obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_SPIFLASH)	+= spiflash.o
--- a/target/linux/atheros/patches-2.6.27/120-watchdog.patch
+++ b/target/linux/atheros/patches-2.6.27/120-watchdog.patch
@ -0,0 +1,25 @@
+--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
+@@ -704,6 +704,12 @@
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
+config ATHEROS_WDT
+	tristate "Atheros wisoc Watchdog Timer"
+	depends on ATHEROS
+	help
+	  Hardware driver for the Atheros wisoc Watchdog Timer.
+
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
+@@ -102,6 +102,7 @@
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+ 
+ # PARISC Architecture
+ 
--- a/target/linux/atheros/patches-2.6.27/130-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-2.6.27/130-ar2313_ethernet.patch
@ -0,0 +1,25 @@
+--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
+@@ -359,6 +359,12 @@
+ 	help
+ 	  Select this if your platform comes with an external 93CX6 eeprom.
+ 
+config AR2313
+	tristate "AR2313 Ethernet support"
+	depends on NET_ETHERNET && ATHEROS
+	help
+	  Support for the AR231x/531x ethernet controller
+
+ config MACE
+ 	tristate "MACE (Power Mac ethernet) support"
+ 	depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
+@@ -195,6 +195,7 @@
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_AR2313) += ar2313/
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
--- a/target/linux/atheros/patches-2.6.27/135-ar2313_2.6.26.patch
+++ b/target/linux/atheros/patches-2.6.27/135-ar2313_2.6.26.patch
@ -0,0 +1,11 @@
+--- a/drivers/net/ar2313/ar2313.c
+++ b/drivers/net/ar2313/ar2313.c
+@@ -291,7 +291,7 @@
+ 	sp->mii_bus.write = mdiobus_write;
+ 	sp->mii_bus.reset = mdiobus_reset;
+ 	sp->mii_bus.name = "ar2313_eth_mii";
+-	sp->mii_bus.id = 0;
+	snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
+ 	sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+ 	*sp->mii_bus.irq = PHY_POLL;
+ 
--- a/target/linux/atheros/patches-2.6.27/140-redboot_partition_scan.patch
+++ b/target/linux/atheros/patches-2.6.27/140-redboot_partition_scan.patch
@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
+	buf = vmalloc(master->erasesize);
+	if (!buf)
+		return -ENOMEM;
+
+ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+-		while (master->block_isbad && 
+		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+ 		}
+ 	} else {
+ 		offset = directory * master->erasesize;
+-		while (master->block_isbad && 
+		while (master->block_isbad &&
+ 		       master->block_isbad(master, offset)) {
+ 			offset += master->erasesize;
+ 			if (offset == master->size)
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+-
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+ 
+@@ -156,6 +157,11 @@
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
+		if (offset + master->erasesize < master->size) {
+			/* not at the end of the flash yet, maybe next block :) */
+			directory++;
+			goto restart;
+		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;
--- a/target/linux/atheros/patches-2.6.27/150-bridge-printk.patch
+++ b/target/linux/atheros/patches-2.6.27/150-bridge-printk.patch
@ -0,0 +1,26 @@
+--- a/net/core/dev.c
+++ b/net/core/dev.c
+@@ -3983,8 +3983,8 @@
+ 	/* Fix illegal SG+CSUM combinations. */
+ 	if ((dev->features & NETIF_F_SG) &&
+ 	    !(dev->features & NETIF_F_ALL_CSUM)) {
+-		printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n",
+-		       dev->name);
+		//printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n",
+		//       dev->name);
+ 		dev->features &= ~NETIF_F_SG;
+ 	}
+ 
+@@ -3997,9 +3997,9 @@
+ 	}
+ 	if (dev->features & NETIF_F_UFO) {
+ 		if (!(dev->features & NETIF_F_HW_CSUM)) {
+-			printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+-					"NETIF_F_HW_CSUM feature.\n",
+-							dev->name);
+			//printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+			//		"NETIF_F_HW_CSUM feature.\n",
+			//				dev->name);
+ 			dev->features &= ~NETIF_F_UFO;
+ 		}
+ 		if (!(dev->features & NETIF_F_SG)) {
--- a/target/linux/atheros/patches-2.6.27/200-ar2313_enable_mvswitch.patch
+++ b/target/linux/atheros/patches-2.6.27/200-ar2313_enable_mvswitch.patch
@ -0,0 +1,34 @@
+--- a/drivers/net/ar2313/ar2313.c
+++ b/drivers/net/ar2313/ar2313.c
+@@ -953,9 +953,9 @@
+ 						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+ 
+ 				dev->stats.rx_bytes += skb->len;
+-				skb->protocol = eth_type_trans(skb, dev);
+
+ 				/* pass the packet to upper layers */
+-				netif_rx(skb);
+				sp->rx(skb);
+ 
+ 				skb_new->dev = dev;
+ 				/* 16 bit align */
+@@ -1370,6 +1370,8 @@
+ 		return PTR_ERR(phydev);
+ 	}
+ 
+	sp->rx = phydev->netif_rx;
+
+ 	/* mask with MAC supported features */
+ 	phydev->supported &= (SUPPORTED_10baseT_Half
+ 		| SUPPORTED_10baseT_Full
+--- a/drivers/net/ar2313/ar2313.h
+++ b/drivers/net/ar2313/ar2313.h
+@@ -107,6 +107,8 @@
+  */
+ struct ar2313_private {
+ 	struct net_device *dev;
+	int (*rx)(struct sk_buff *skb);
+
+ 	int version;
+ 	u32 mb[2];
+ 
--- a/target/linux/atheros/patches-2.6.27/901-get_c0_compare_irq_function.patch
+++ b/target/linux/atheros/patches-2.6.27/901-get_c0_compare_irq_function.patch
@ -0,0 +1,43 @@
+--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
+@@ -45,6 +45,7 @@
+ #include <asm/mmu_context.h>
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1484,6 +1485,8 @@
+ 	 */
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
+		if (get_c0_compare_irq)
+			cp0_compare_irq = get_c0_compare_irq();
+ 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
+@@ -53,6 +53,7 @@
+ #ifdef CONFIG_CEVT_R4K
+ extern int mips_clockevent_init(void);
+ extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
+ #else
+ static inline int mips_clockevent_init(void)
+ {
+--- a/arch/mips/atheros/board.c
+++ b/arch/mips/atheros/board.c
+@@ -205,6 +205,11 @@
+ void __init plat_time_init(void) {
+     board_time_init();
+ }
+
+unsigned int __cpuinit get_c0_compare_irq(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+ #endif
+ 
+ void __init arch_init_irq(void)
--- a/target/linux/atheros/patches-2.6.27/902-mips_clocksource_init_war.patch
+++ b/target/linux/atheros/patches-2.6.27/902-mips_clocksource_init_war.patch
@ -0,0 +1,56 @@
+--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,22 @@
+ #include <asm/cevt-r4k.h>
+ 
+ /*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+/*
+  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+  * of these routines with SMTC-specific variants.
+  */
+@@ -30,6 +46,7 @@
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
+	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }
+@@ -99,22 +116,6 @@
+ 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+ 
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register.  4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+-	do { \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-		irq_disable_hazard(); \
+-	} while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ 	unsigned int delta;