mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
add support for the Netgear WG302v1/WAG302v1
SVN-Revision: 10197
This commit is contained in:
Imre Kaloz
parent
5e0b4b1379
commit
ed57d3042b
@ -22,7 +22,7 @@
|
|||||||
# NOTE: for now it's for only IXP4xx in big endian mode
|
# NOTE: for now it's for only IXP4xx in big endian mode
|
||||||
|
|
||||||
# list of supported boards, in "boardname machtypeid" format
|
# list of supported boards, in "boardname machtypeid" format
|
||||||
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091" "ap1000 1543"
|
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v1 889" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091" "ap1000 1543"
|
||||||
do
|
do
|
||||||
set -- $board
|
set -- $board
|
||||||
hexid=$(printf %x\\n $2)
|
hexid=$(printf %x\\n $2)
|
||||||
|
|||||||
@ -219,6 +219,7 @@ CONFIG_MACH_NAS100D=y
|
|||||||
CONFIG_MACH_NSLU2=y
|
CONFIG_MACH_NSLU2=y
|
||||||
CONFIG_MACH_PRONGHORNMETRO=y
|
CONFIG_MACH_PRONGHORNMETRO=y
|
||||||
CONFIG_MACH_SIDEWINDER=y
|
CONFIG_MACH_SIDEWINDER=y
|
||||||
|
CONFIG_MACH_WG302V1=y
|
||||||
CONFIG_MACH_WG302V2=y
|
CONFIG_MACH_WG302V2=y
|
||||||
CONFIG_MACH_WRT300NV2=y
|
CONFIG_MACH_WRT300NV2=y
|
||||||
# CONFIG_MAC_PARTITION is not set
|
# CONFIG_MAC_PARTITION is not set
|
||||||
|
|||||||
217
target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch
Normal file
217
target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch
Normal file
@ -0,0 +1,217 @@
|
|||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:08:42.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig 2008-01-14 22:12:21.000000000 +0100
|
||||||
|
@@ -49,6 +49,14 @@
|
||||||
|
7001 Access Point. For more information on this platform,
|
||||||
|
see http://openwrt.org
|
||||||
|
|
||||||
|
+config MACH_WG302V1
|
||||||
|
+ bool "Netgear WG302 v1 / WAG302 v1"
|
||||||
|
+ select PCI
|
||||||
|
+ help
|
||||||
|
+ Say 'Y' here if you want your kernel to support Netgear's
|
||||||
|
+ WG302 v1 or WAG302 v1 Access Points. For more information
|
||||||
|
+ on this platform, see http://openwrt.org
|
||||||
|
+
|
||||||
|
config MACH_WG302V2
|
||||||
|
bool "Netgear WG302 v2 / WAG302 v2"
|
||||||
|
select PCI
|
||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:08:42.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile 2008-01-14 22:11:47.000000000 +0100
|
||||||
|
@@ -14,6 +14,7 @@
|
||||||
|
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
||||||
|
+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
||||||
|
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
|
||||||
|
@@ -33,6 +34,7 @@
|
||||||
|
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
|
||||||
|
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
|
||||||
|
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||||
|
+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
|
||||||
|
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
||||||
|
obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
|
||||||
|
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
|
||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c 1970-01-01 01:00:00.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-01-14 22:33:52.000000000 +0100
|
||||||
|
@@ -0,0 +1,63 @@
|
||||||
|
+/*
|
||||||
|
+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
|
||||||
|
+ *
|
||||||
|
+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
|
||||||
|
+ *
|
||||||
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||||
|
+ *
|
||||||
|
+ * based on coyote-pci.c:
|
||||||
|
+ * Copyright (C) 2002 Jungo Software Technologies.
|
||||||
|
+ * Copyright (C) 2003 MontaVista Software, Inc.
|
||||||
|
+ *
|
||||||
|
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or modify
|
||||||
|
+ * it under the terms of the GNU General Public License version 2 as
|
||||||
|
+ * published by the Free Software Foundation.
|
||||||
|
+ *
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/kernel.h>
|
||||||
|
+#include <linux/pci.h>
|
||||||
|
+#include <linux/init.h>
|
||||||
|
+#include <linux/irq.h>
|
||||||
|
+
|
||||||
|
+#include <asm/mach-types.h>
|
||||||
|
+#include <asm/hardware.h>
|
||||||
|
+
|
||||||
|
+#include <asm/mach/pci.h>
|
||||||
|
+
|
||||||
|
+void __init wg302v1_pci_preinit(void)
|
||||||
|
+{
|
||||||
|
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
|
||||||
|
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
|
||||||
|
+
|
||||||
|
+ ixp4xx_pci_preinit();
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||||
|
+{
|
||||||
|
+ if (slot == 1)
|
||||||
|
+ return IRQ_IXP4XX_GPIO8;
|
||||||
|
+ else if (slot == 2)
|
||||||
|
+ return IRQ_IXP4XX_GPIO10;
|
||||||
|
+ else return -1;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+struct hw_pci wg302v1_pci __initdata = {
|
||||||
|
+ .nr_controllers = 1,
|
||||||
|
+ .preinit = wg302v1_pci_preinit,
|
||||||
|
+ .swizzle = pci_std_swizzle,
|
||||||
|
+ .setup = ixp4xx_setup,
|
||||||
|
+ .scan = ixp4xx_scan_bus,
|
||||||
|
+ .map_irq = wg302v1_map_irq,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+int __init wg302v1_pci_init(void)
|
||||||
|
+{
|
||||||
|
+ if (machine_is_wg302v1())
|
||||||
|
+ pci_common_init(&wg302v1_pci);
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+subsys_initcall(wg302v1_pci_init);
|
||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 1970-01-01 01:00:00.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:04:01.000000000 +0100
|
||||||
|
@@ -0,0 +1,109 @@
|
||||||
|
+/*
|
||||||
|
+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
|
||||||
|
+ *
|
||||||
|
+ * Board setup for the Netgear WG302 v1 and WAG302 v1
|
||||||
|
+ *
|
||||||
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||||
|
+ *
|
||||||
|
+ * based on coyote-setup.c:
|
||||||
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||||
|
+ *
|
||||||
|
+ * Author: Imre Kaloz <kaloz@openwrt.org>
|
||||||
|
+ *
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/kernel.h>
|
||||||
|
+#include <linux/init.h>
|
||||||
|
+#include <linux/device.h>
|
||||||
|
+#include <linux/serial.h>
|
||||||
|
+#include <linux/tty.h>
|
||||||
|
+#include <linux/serial_8250.h>
|
||||||
|
+#include <linux/slab.h>
|
||||||
|
+
|
||||||
|
+#include <asm/types.h>
|
||||||
|
+#include <asm/setup.h>
|
||||||
|
+#include <asm/memory.h>
|
||||||
|
+#include <asm/hardware.h>
|
||||||
|
+#include <asm/irq.h>
|
||||||
|
+#include <asm/mach-types.h>
|
||||||
|
+#include <asm/mach/arch.h>
|
||||||
|
+#include <asm/mach/flash.h>
|
||||||
|
+
|
||||||
|
+static struct flash_platform_data wg302v1_flash_data = {
|
||||||
|
+ .map_name = "cfi_probe",
|
||||||
|
+ .width = 2,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct resource wg302v1_flash_resource = {
|
||||||
|
+ .flags = IORESOURCE_MEM,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device wg302v1_flash = {
|
||||||
|
+ .name = "IXP4XX-Flash",
|
||||||
|
+ .id = 0,
|
||||||
|
+ .dev = {
|
||||||
|
+ .platform_data = &wg302v1_flash_data,
|
||||||
|
+ },
|
||||||
|
+ .num_resources = 1,
|
||||||
|
+ .resource = &wg302v1_flash_resource,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct resource wg302v1_uart_resource = {
|
||||||
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
||||||
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
||||||
|
+ .flags = IORESOURCE_MEM,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct plat_serial8250_port wg302v1_uart_data[] = {
|
||||||
|
+ {
|
||||||
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
||||||
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
||||||
|
+ .irq = IRQ_IXP4XX_UART1,
|
||||||
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||||
|
+ .iotype = UPIO_MEM,
|
||||||
|
+ .regshift = 2,
|
||||||
|
+ .uartclk = IXP4XX_UART_XTAL,
|
||||||
|
+ },
|
||||||
|
+ { },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device wg302v1_uart = {
|
||||||
|
+ .name = "serial8250",
|
||||||
|
+ .id = PLAT8250_DEV_PLATFORM,
|
||||||
|
+ .dev = {
|
||||||
|
+ .platform_data = wg302v1_uart_data,
|
||||||
|
+ },
|
||||||
|
+ .num_resources = 1,
|
||||||
|
+ .resource = &wg302v1_uart_resource,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device *wg302v1_devices[] __initdata = {
|
||||||
|
+ &wg302v1_flash,
|
||||||
|
+ &wg302v1_uart,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static void __init wg302v1_init(void)
|
||||||
|
+{
|
||||||
|
+ ixp4xx_sys_init();
|
||||||
|
+
|
||||||
|
+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||||
|
+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
||||||
|
+
|
||||||
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
||||||
|
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
||||||
|
+
|
||||||
|
+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+#ifdef CONFIG_MACH_WG302V1
|
||||||
|
+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
|
||||||
|
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
||||||
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||||
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||||
|
+ .map_io = ixp4xx_map_io,
|
||||||
|
+ .init_irq = ixp4xx_init_irq,
|
||||||
|
+ .timer = &ixp4xx_timer,
|
||||||
|
+ .boot_params = 0x0100,
|
||||||
|
+ .init_machine = wg302v1_init,
|
||||||
|
+MACHINE_END
|
||||||
|
+#endif
|
||||||
@ -0,0 +1,31 @@
|
|||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:06:42.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:03:16.000000000 +0100
|
||||||
|
@@ -77,9 +77,27 @@
|
||||||
|
.resource = &wg302v1_uart_resource,
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* Built-in 10/100 Ethernet MAC interfaces */
|
||||||
|
+static struct eth_plat_info wg302_plat_eth[] = {
|
||||||
|
+ {
|
||||||
|
+ .phy = 30,
|
||||||
|
+ .rxq = 3,
|
||||||
|
+ .txreadyq = 20,
|
||||||
|
+ }
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device wg302_eth[] = {
|
||||||
|
+ {
|
||||||
|
+ .name = "ixp4xx_eth",
|
||||||
|
+ .id = IXP4XX_ETH_NPEB,
|
||||||
|
+ .dev.platform_data = wg302_plat_eth,
|
||||||
|
+ }
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static struct platform_device *wg302v1_devices[] __initdata = {
|
||||||
|
&wg302v1_flash,
|
||||||
|
&wg302v1_uart,
|
||||||
|
+ &wg302_eth[0],
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init wg302v1_init(void)
|
||||||
@ -0,0 +1,48 @@
|
|||||||
|
diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
|
||||||
|
--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:12:03.000000000 +0100
|
||||||
|
+++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:11:34.000000000 +0100
|
||||||
|
@@ -100,6 +100,36 @@
|
||||||
|
&wg302_eth[0],
|
||||||
|
};
|
||||||
|
|
||||||
|
+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
|
||||||
|
+
|
||||||
|
+static void __init wg302v1_fixup(struct machine_desc *desc,
|
||||||
|
+ struct tag *tags, char **cmdline, struct meminfo *mi)
|
||||||
|
+
|
||||||
|
+{
|
||||||
|
+ struct tag *t = tags;
|
||||||
|
+ char *p = *cmdline;
|
||||||
|
+
|
||||||
|
+ /* Find the end of the tags table, taking note of any cmdline tag. */
|
||||||
|
+ for (; t->hdr.size; t = tag_next(t)) {
|
||||||
|
+ if (t->hdr.tag == ATAG_CMDLINE) {
|
||||||
|
+ p = t->u.cmdline.cmdline;
|
||||||
|
+ }
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ /* Overwrite the end of the table with a new cmdline tag. */
|
||||||
|
+ t->hdr.tag = ATAG_CMDLINE;
|
||||||
|
+ t->hdr.size = (sizeof (struct tag_header) +
|
||||||
|
+ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
|
||||||
|
+ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
|
||||||
|
+ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
|
||||||
|
+ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
|
||||||
|
+
|
||||||
|
+ /* Terminate the table. */
|
||||||
|
+ t = tag_next(t);
|
||||||
|
+ t->hdr.tag = ATAG_NONE;
|
||||||
|
+ t->hdr.size = 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
static void __init wg302v1_init(void)
|
||||||
|
{
|
||||||
|
ixp4xx_sys_init();
|
||||||
|
@@ -118,6 +148,7 @@
|
||||||
|
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
||||||
|
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||||
|
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||||
|
+ .fixup = wg302v1_fixup,
|
||||||
|
.map_io = ixp4xx_map_io,
|
||||||
|
.init_irq = ixp4xx_init_irq,
|
||||||
|
.timer = &ixp4xx_timer,
|
||||||
Loading…
Reference in New Issue
Block a user