mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-18 21:28:02 +00:00
ath79: port buffalo WZR-450HP2 from ar71xx
Referencing commit a1837135e0
Hardware
--------
SoC: Qualcomm Atheros QCA9558
RAM: 128M DDR2 (Nanya NT5TU64M16HG-AC)
FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00)
WLAN: QCA9558 3T3R 802.11 bgn
ETH: Qualcomm Atheros QCA8337
UART: 115200 8n1
BUTTON: Reset - WPS - "Router" switch
LED: 2x system-LED, 2x wlan-LED, 1x internet-LED,
2x routing-LED
LEDs besides the ethernet ports are controlled
by the ethernet switch
MAC Address:
use address(sample 1) source
label cc:e1:d5:xx:xx:ed art@macaddr_wan
lan cc:e1:d5:xx:xx:ec art@macaddr_lan
wan cc:e1:d5:xx:xx:ed $label
WiFi4_2G cc:e1:d5:xx:xx:ec art@cal_ath9k
Installation from Serial Console
------------
1. Connect to the serial console. Power up the device and interrupt
autoboot when prompted
2. Connect a TFTP server reachable at 192.168.11.10/24
to the ethernet port. Serve the OpenWrt initramfs image as
"openwrt.bin"
3. Boot the initramfs image using U-Boot
ath> tftpboot 0x84000000 openwrt.bin
ath> bootm 0x84000000
4. Copy the OpenWrt sysupgrade image to the device using scp and
install it like a normal upgrade (with no need to keeping config
since no config from "previous OpenWRT installation" could be kept
at all)
# sysupgrade -n /path/to/openwrt/sysupgrade.bin
Installation from Web Interface
------------
To flash just do a firmware upgrade from the stock firmware (Buffalo
branded dd-wrt) with squashfs-factory.bin
Signed-off-by: Edward Chow <equu@openmail.cc>
This commit is contained in:
Edward Chow
parent
5a24850de1
commit
ed36e80c0e
@ -28,6 +28,7 @@ asus,rt-ac59u-v2|\
|
||||
asus,zenwifi-cd6n|\
|
||||
asus,zenwifi-cd6r|\
|
||||
buffalo,bhr-4grv2|\
|
||||
buffalo,wzr-450hp2|\
|
||||
devolo,magic-2-wifi|\
|
||||
engenius,eap300-v2|\
|
||||
engenius,eap350-v1|\
|
||||
|
||||
179
target/linux/ath79/dts/qca9558_buffalo_wzr-450hp2.dts
Normal file
179
target/linux/ath79/dts/qca9558_buffalo_wzr-450hp2.dts
Normal file
@ -0,0 +1,179 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca955x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "buffalo,wzr-450hp2", "qca,qca9558";
|
||||
model = "Buffalo WZR-450HP2/WZR-450HP2D";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_green;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_green;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: status_green {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_wlan_green: wlan_green {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led_wps_green: wps_green {
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "RFKILL button";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
reg = <0x40000 0x10000>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
reg = <0x50000 0xf90000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
reg = <0xfe0000 0x10000>;
|
||||
label = "user_property";
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_wan: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_lan: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
cal_ath9k: cal_ath9k@1000 {
|
||||
reg = <0x1000 0x440>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x07600000 /* PORT0 PAD MODE CTRL: RGMII, to eth0 */
|
||||
0x0c 0x00080080 /* PORT6 PAD MODE CTRL: SGMII, to eth1 */
|
||||
0x10 0x81000080 /* POWER ON STRAP */
|
||||
0x50 0xcc35cc35 /* LED_CTRL0 */
|
||||
0x54 0xca35ca35 /* LED_CTRL1 */
|
||||
0x58 0xc935c935 /* LED_CTRL2 */
|
||||
0x5c 0x03ffff00 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_wan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
phy-handle = <&phy0>;
|
||||
pll-data = <0x56000000 0x00000101 0x00001616>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-enabled = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_lan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
pll-data = <0x03000101 0x00000101 0x00001616>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&cal_ath9k>;
|
||||
nvmem-cell-names = "calibration";
|
||||
};
|
||||
@ -213,6 +213,10 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
|
||||
;;
|
||||
buffalo,wzr-450hp2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
|
||||
;;
|
||||
buffalo,wzr-600dhp|\
|
||||
buffalo,wzr-hp-ag300h|\
|
||||
tplink,archer-c25-v1|\
|
||||
|
||||
@ -759,6 +759,16 @@ define Device/buffalo_wzr-hp-g450h
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
||||
|
||||
define Device/buffalo_wzr-450hp2
|
||||
$(Device/buffalo_common)
|
||||
SOC := qca9558
|
||||
DEVICE_MODEL := WZR-450HP2/WZR-450HP2D
|
||||
BUFFALO_PRODUCT := WZR-450HP2
|
||||
IMAGE_SIZE := 15936k
|
||||
SUPPORTED_DEVICES += wzr-450hp2
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wzr-450hp2
|
||||
|
||||
define Device/comfast_cf-e110n-v2
|
||||
SOC := qca9533
|
||||
DEVICE_VENDOR := COMFAST
|
||||
|
||||
Loading…
Reference in New Issue
Block a user