mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
lantiq: add support for AVM FRITZ!Box 7362 SL
Hardware: - SoC: Lantiq VRX288 - RAM: Winbond W971GG6JB 1 Gb (128 MiB) - Flash: - SPI: 8 Mb (1 MiB) for bootloader and tffs - NAND: 1 Gb (128 MiB) for OS - xDSL: Lantiq VRX208 - WLAN: Atheros AR9381 - DECT: Dialog Semiconductors SC14441 Everything except FXS/DECT works (no drivers for AVM's FXS implementation with SC14441). Installation via FTP: 1. Use scripts/flashing/eva_ramboot.py to send initramfs-kernel.bin to the device when powering on. Standard AVM procedures with finding the correct IP address and the right moment to open FTP apply here (approx. 4 seconds on 7362SL). IMPORTANT: set lzma compression in ramdisk options, bootloader stalls when receiving uncompressed images. 2. Transfer sysupgrade.bin image with scp to /tmp directory and run sysupgrade 3. First boot might take a bit longer if linux_fs_start was set to 1, in that case the device will reboot twice, first time it will fail to load second kernel (overwritten by ubifs), set linux_fs_start to 0 and reboot. OpenWrt uses the entire NAND flash. Kernel uses 4 MiB and rootfs uses the rest of 124 MiB, overwriting everything related to FRITZ!OS - both OS images, config and answering machine/media server data. To return to FRITZ!OS, use AVM's recovery image. Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
This commit is contained in:
parent
5026f43559
commit
eae6cac6a3
@ -158,6 +158,14 @@ avm,fritz7360sl)
|
|||||||
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
||||||
;;
|
;;
|
||||||
|
|
||||||
|
avm,fritz7362sl)
|
||||||
|
annex="b"
|
||||||
|
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
||||||
|
wan_mac=$(fritz_tffs -n macdsl -i $(find_mtd_part "tffs (1)"))
|
||||||
|
ucidef_add_switch "switch0" \
|
||||||
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
||||||
|
;;
|
||||||
|
|
||||||
avm,fritz7412)
|
avm,fritz7412)
|
||||||
tffsdev=$(find_mtd_chardev "nand-tffs")
|
tffsdev=$(find_mtd_chardev "nand-tffs")
|
||||||
annex="b"
|
annex="b"
|
||||||
|
@ -157,7 +157,8 @@ case "$FIRMWARE" in
|
|||||||
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
|
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
|
||||||
;;
|
;;
|
||||||
avm,fritz3370-rev2-hynix|\
|
avm,fritz3370-rev2-hynix|\
|
||||||
avm,fritz3370-rev2-micron)
|
avm,fritz3370-rev2-micron|\
|
||||||
|
avm,fritz7362sl)
|
||||||
ath9k_eeprom_extract_reverse "urlader" 5441 1088
|
ath9k_eeprom_extract_reverse "urlader" 5441 1088
|
||||||
;;
|
;;
|
||||||
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
|
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
|
||||||
|
@ -11,6 +11,7 @@ platform_do_upgrade() {
|
|||||||
case "$board" in
|
case "$board" in
|
||||||
avm,fritz3370-rev2-hynix|\
|
avm,fritz3370-rev2-hynix|\
|
||||||
avm,fritz3370-rev2-micron|\
|
avm,fritz3370-rev2-micron|\
|
||||||
|
avm,fritz7362sl|\
|
||||||
avm,fritz7412|\
|
avm,fritz7412|\
|
||||||
bt,homehub-v2b|\
|
bt,homehub-v2b|\
|
||||||
bt,homehub-v3a|\
|
bt,homehub-v3a|\
|
||||||
|
@ -0,0 +1,135 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "FRITZ736X.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
|
||||||
|
model = "AVM FRITZ!Box 7362 SL";
|
||||||
|
};
|
||||||
|
|
||||||
|
&power_green {
|
||||||
|
label = "fritz7362sl:green:power";
|
||||||
|
};
|
||||||
|
|
||||||
|
&power_red {
|
||||||
|
label = "fritz7362sl:red:power";
|
||||||
|
};
|
||||||
|
|
||||||
|
&info_green {
|
||||||
|
label = "fritz7362sl:green:info";
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi {
|
||||||
|
label = "fritz7362sl:green:wlan";
|
||||||
|
};
|
||||||
|
|
||||||
|
&info_red {
|
||||||
|
label = "fritz7362sl:red:info";
|
||||||
|
};
|
||||||
|
|
||||||
|
&dect {
|
||||||
|
label = "fritz7362sl:green:dect";
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio {
|
||||||
|
pins_spi_default: pins_spi_default {
|
||||||
|
spi_in {
|
||||||
|
lantiq,groups = "spi_di";
|
||||||
|
lantiq,function = "spi";
|
||||||
|
};
|
||||||
|
|
||||||
|
spi_out {
|
||||||
|
lantiq,groups = "spi_do", "spi_clk",
|
||||||
|
"spi_cs4";
|
||||||
|
lantiq,function = "spi";
|
||||||
|
lantiq,output = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&state_default {
|
||||||
|
nand {
|
||||||
|
lantiq,groups = "nand ale", "nand cle",
|
||||||
|
"nand cs1", "nand rd", "nand rdy";
|
||||||
|
lantiq,function = "ebu";
|
||||||
|
};
|
||||||
|
|
||||||
|
pcie-rst {
|
||||||
|
lantiq,pins = "io21";
|
||||||
|
lantiq,open-drain = <1>;
|
||||||
|
lantiq,output = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pins_spi_default>;
|
||||||
|
|
||||||
|
flash@4 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <4 0>;
|
||||||
|
spi-max-frequency = <1000000>;
|
||||||
|
|
||||||
|
urlader: partition@0 {
|
||||||
|
reg = <0x0 0x40000>;
|
||||||
|
label = "urlader";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
reg = <0x40000 0x60000>;
|
||||||
|
label = "tffs (1)";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@A0000 {
|
||||||
|
reg = <0xA0000 0x60000>;
|
||||||
|
label = "tffs (2)";
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&localbus {
|
||||||
|
nand@1 {
|
||||||
|
compatible = "lantiq,nand-xway";
|
||||||
|
lantiq,cs1 = <1>;
|
||||||
|
bank-width = <1>;
|
||||||
|
reg = <1 0x0 0x2000000>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
nand-ecc-mode = "on-die";
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "kernel";
|
||||||
|
reg = <0x0 0x400000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@400000 {
|
||||||
|
label = "ubi";
|
||||||
|
reg = <0x400000 0x7c00000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie0 {
|
||||||
|
gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||||
|
|
||||||
|
pcie@0 {
|
||||||
|
#size-cells = <1>;
|
||||||
|
#address-cells = <2>;
|
||||||
|
};
|
||||||
|
};
|
@ -677,6 +677,17 @@ define Device/avm_fritz7412
|
|||||||
endef
|
endef
|
||||||
TARGET_DEVICES += avm_fritz7412
|
TARGET_DEVICES += avm_fritz7412
|
||||||
|
|
||||||
|
define Device/avm_fritz7362sl
|
||||||
|
$(Device/AVM)
|
||||||
|
$(Device/NAND)
|
||||||
|
KERNEL_SIZE := 4096k
|
||||||
|
IMAGE_SIZE := 49152k
|
||||||
|
DEVICE_DTS := FRITZ7362SL
|
||||||
|
DEVICE_TITLE := AVM FRITZ!Box 7362 SL
|
||||||
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 fritz-tffs
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += avm_fritz7362sl
|
||||||
|
|
||||||
define Device/arcadyan_vg3503j
|
define Device/arcadyan_vg3503j
|
||||||
IMAGE_SIZE := 8000k
|
IMAGE_SIZE := 8000k
|
||||||
DEVICE_DTS := VG3503J
|
DEVICE_DTS := VG3503J
|
||||||
|
Loading…
Reference in New Issue
Block a user