drop support for 2.6.30

SVN-Revision: 20440
This commit is contained in:
Florian Fainelli 2010-03-26 10:12:58 +00:00
parent 5cbc43005c
commit e7066336cb
4 changed files with 0 additions and 300 deletions

View File

@ -1,181 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=y
# CONFIG_BCM47XX is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_SD=y
CONFIG_BOOT_RAW=y
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
# CONFIG_CLASSIC_RCU is not set
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
# CONFIG_DEBUG_FS is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EXT2_FS=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_KEXEC=y
CONFIG_KORINA=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_MIKROTIK_RB532=y
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MIKROTIK_RB532=y
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
# CONFIG_MTD_ROOTFS_SPLIT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PATA_RB532=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
CONFIG_RC32434_WDT=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_TRACE is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SLOW_WORK is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
CONFIG_TRACING_SUPPORT=y
CONFIG_TRAD_SIGNALS=y
CONFIG_TREE_RCU=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_YAFFS_9BYTE_TAGS=y
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0

View File

@ -1,20 +0,0 @@
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -67,6 +67,7 @@ static inline unsigned long tag2ul(char
return simple_strtoul(num, 0, 10);
}
+extern char __image_cmdline[];
void __init prom_setup_cmdline(void)
{
char cmd_line[CL_SIZE];
@@ -109,6 +110,9 @@ void __init prom_setup_cmdline(void)
}
*(cp++) = ' ';
+ strcpy(cp,(__image_cmdline));
+ cp += strlen(__image_cmdline);
+
i = strlen(arcs_cmdline);
if (i > 0) {
*(cp++) = ' ';

View File

@ -1,48 +0,0 @@
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 =
};
/* Resources and device for NAND */
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load. So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb532_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
static int rb532_dev_ready(struct mtd_info *mtd)
{
return gpio_get_value(GPIO_RDY);
@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char *
/* NAND definitions */
#define NAND_CHIP_DELAY 25
+static int rb532_nand_fixup(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (mtd->writesize == 512)
+ chip->ecc.layout = &rb532_nand_ecclayout;
+
+ return 0;
+}
+
static void __init rb532_nand_setup(void)
{
switch (mips_machtype) {
@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void
rb532_nand_data.chip.partitions = rb532_partition_info;
rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+
+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
}

View File

@ -1,51 +0,0 @@
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -133,6 +133,7 @@ struct korina_private {
int dma_halt_cnt;
int dma_run_cnt;
struct napi_struct napi;
+ struct timer_list media_check_timer;
struct mii_if_info mii_if;
struct net_device *dev;
int phy_addr;
@@ -664,6 +665,15 @@ static void korina_check_media(struct ne
&lp->eth_regs->ethmac2);
}
+static void korina_poll_media(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct korina_private *lp = netdev_priv(dev);
+
+ korina_check_media(dev, 0);
+ mod_timer(&lp->media_check_timer, jiffies + HZ);
+}
+
static void korina_set_carrier(struct mii_if_info *mii)
{
if (mii->force_media) {
@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
+ mod_timer(&lp->media_check_timer, jiffies + 1);
out:
return ret;
@@ -1053,6 +1064,8 @@ static int korina_close(struct net_devic
struct korina_private *lp = netdev_priv(dev);
u32 tmp;
+ del_timer(&lp->media_check_timer);
+
/* Disable interrupts */
disable_irq(lp->rx_irq);
disable_irq(lp->tx_irq);
@@ -1176,6 +1189,7 @@ static int korina_probe(struct platform_
": cannot register net device %d\n", rc);
goto probe_err_register;
}
+ setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
out:
return rc;