lantiq/xrx200: move 8M flash devices to a small flash subtarget

Images for xrx200 8M flash are either not building due to image
size (TD-W8970, TD-W8980) or building such that the available
free space in the overlayfs is too little to be useful.

To keep images for these devices buildable, move them into a
small flash variant of the xrx200 subtarget.  As these devices
are NOR flash only, remove NAND and UBI references from the
kernel config to gain some additional image size reduction.

The apparent 8M flash devices Arcadyan VGV7510KW22-brn,
Arcadyan VGV7519-brn and Lantiq Easy80920-nor seem to exist in
order to create special "factory" installation images for these
devices (which actually have larger flash: 16MB for the
Arcardyan devices; 64MB for the Lantiq device).  As a
considerable amount of surgery would appear to be required to
the uboot-lantiq package structure to separate the "factory"
from the "sysupgrade" device recipes for these devices they
remain in the xrx200 target - if factory images aren't now
created, 23.05.x factory images should suffice for initial
installation.

Tested on: Netgear DM200, TP-Link TD-W8980,
           AVM Fritz7490 (xrx200 subtarget: image build only)

Fixes: https://github.com/openwrt/openwrt/issues/16761
Signed-off-by: Andrew MacIntyre <andymac@pcug.org.au>
Link: https://github.com/openwrt/openwrt/pull/17113
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile

@@ -40,7 +40,7 @@ define Package/dsl-vrx200-firmware-xdsl-a
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex A firmware
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-a/description
@@ -52,7 +52,7 @@ define Package/dsl-vrx200-firmware-xdsl-b
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex B firmware
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-b/description
@@ -64,7 +64,7 @@ define Package/dsl-vrx200-firmware-xdsl-a-patch
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex B to Annex A firmware patch
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-b +bspatch
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-b +bspatch
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-a-patch/description
@@ -76,7 +76,7 @@ define Package/dsl-vrx200-firmware-xdsl-b-patch
   CATEGORY:=Firmware
   TITLE:=VRX200 / VR9 CPE xDSL Annex A to Annex B firmware patch
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-a +bspatch
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-a +bspatch
 endef
 
 define Package/dsl-vrx200-firmware-xdsl-b-patch/description

package/kernel/lantiq/ltq-atm/Makefile

@@ -33,7 +33,7 @@ endef
 KernelPackage/ltq-atm-danube=$(call KernelPackage/ltq-atm-template,danube,(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy))
 KernelPackage/ltq-atm-ar9=$(call KernelPackage/ltq-atm-template,ar9,TARGET_lantiq_xway)
 KernelPackage/ltq-atm-ase=$(call KernelPackage/ltq-atm-template,ase,TARGET_lantiq_ase)
-KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,TARGET_lantiq_xrx200)
+KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
 
 define Build/Configure
 endef

package/kernel/lantiq/ltq-deu/Makefile

@@ -21,14 +21,14 @@ define KernelPackage/ltq-deu-template
   TITLE:=deu driver for $(1)
   URL:=http://www.lantiq.com/
   VARIANT:=$(1)
-  DEPENDS:=@TARGET_lantiq_$(2) +kmod-crypto-manager +kmod-crypto-des
+  DEPENDS:=@$(2) +kmod-crypto-manager +kmod-crypto-des
   FILES:=$(PKG_BUILD_DIR)/ltq_deu_$(1).ko
   AUTOLOAD:=$(call AutoProbe,ltq_deu_$(1))
 endef
 
-KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,xway)
+KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,TARGET_lantiq_xway)
-KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,xway)
+KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,TARGET_lantiq_xway)
-KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,xrx200)
+KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
 
 define Build/Configure
 endef

package/kernel/lantiq/ltq-ptm/Makefile

@@ -22,7 +22,7 @@ define KernelPackage/ltq-ptm-template
   TITLE:=ptm driver for $(1)
   URL:=http://www.lantiq.com/
   VARIANT:=$(1)
-  DEPENDS:=@TARGET_lantiq_$(2)
+  DEPENDS:=@$(2)
 ifeq ($(1),vr9)
   DEPENDS+= +PACKAGE_kmod-ltq-ptm-$(1):kmod-ltq-vdsl-vr9-mei
 else
@@ -34,10 +34,10 @@ endif
   FILES:=$(PKG_BUILD_DIR)/ltq_ptm_$(1).ko 
 endef
 
-KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,xway)
+KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,TARGET_lantiq_xway)
-KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,xway)
+KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,TARGET_lantiq_xway)
-KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,ase)
+KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,TARGET_lantiq_ase)
-KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,xrx200)
+KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
 
 define Build/Configure
 endef

package/kernel/lantiq/ltq-vdsl-fw/Makefile

@@ -19,7 +19,7 @@ define Package/ltq-vdsl-vr9-vectoring-fw-installer
   TITLE:=VDSL2 Vectoring Firmware installer
   SECTION:=net
   CATEGORY:=Network
-  DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9
 endef
 
 define Build/Prepare

package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile

@@ -29,7 +29,7 @@ define KernelPackage/ltq-vdsl-vr9-mei
   TITLE:=mei driver for vdsl
   SECTION:=sys
   SUBMENU:=Network Devices
-  DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-ifxos +kmod-ltq-vectoring
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-ifxos +kmod-ltq-vectoring
   FILES:=$(PKG_BUILD_DIR)/src/drv_mei_cpe.ko
   AUTOLOAD:=$(call AutoLoad,50,drv_mei_cpe)
 endef
@@ -44,7 +44,7 @@ define Package/ltq-vdsl-vr9-mei-test
   CATEGORY:=Network
   TITLE:=Lantiq mei driver test tool
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
 endef
 
 define Package/ltq-vdsl-vr9-mei-test/description

package/kernel/lantiq/ltq-vdsl-vr9/Makefile

@@ -29,7 +29,7 @@ define KernelPackage/ltq-vdsl-vr9
   TITLE:=vdsl driver
   SECTION:=sys
   SUBMENU:=Network Devices
-  DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9-mei
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9-mei
   FILES:=$(PKG_BUILD_DIR)/src/drv_dsl_cpe_api.ko
   AUTOLOAD:=$(call AutoLoad,51,drv_dsl_cpe_api)
 endef

package/kernel/lantiq/ltq-vectoring/Makefile

@@ -20,7 +20,7 @@ define KernelPackage/ltq-vectoring
   CATEGORY:=Kernel modules
   SUBMENU:=Network Devices
   TITLE:=driver for sending vectoring error samples
-  DEPENDS:=@TARGET_lantiq_xrx200
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
   FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring.ko
   AUTOLOAD:=$(call AutoLoad,49,ltq_vectoring)
 endef
@@ -38,7 +38,7 @@ define KernelPackage/ltq-vectoring-test
   CATEGORY:=Kernel modules
   SUBMENU:=Network Devices
   TITLE:=driver for testing the vectoring driver
-  DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vectoring
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vectoring
   FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring_test.ko
 endef
 

package/network/config/ltq-vdsl-vr9-app/Makefile

@@ -29,7 +29,7 @@ define Package/ltq-vdsl-vr9-app
   CATEGORY:=Network
   TITLE:=Lantiq VDSL userland tool
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
+  DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +libpthread +librt +ltq-dsl-base +libubox +libubus
   PROVIDES:=ltq-dsl-app
 endef
 

target/linux/lantiq/Makefile

@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 BOARD:=lantiq
 BOARDNAME:=Lantiq
 FEATURES:=squashfs
-SUBTARGETS:=xrx200 xway xway_legacy falcon ase
+SUBTARGETS:=xrx200 xrx200_legacy xway xway_legacy falcon ase
 
 KERNEL_PATCHVER:=6.6
 

target/linux/lantiq/image/Makefile

@@ -162,6 +162,12 @@ include danube.mk
 include ar9.mk
 endif
 
+ifeq ($(SUBTARGET),xrx200_legacy)
+DEFAULT_SOC := vr9
+include tp-link_legacy.mk
+include vr9_legacy.mk
+endif
+
 ifeq ($(SUBTARGET),xrx200)
 DEFAULT_SOC := vr9
 include tp-link.mk

target/linux/lantiq/image/tp-link.mk

@@ -17,34 +17,6 @@ define Device/lantiqTpLink
 	check-size | append-metadata
 endef
 
-define Device/tplink_tdw8970
-  $(Device/dsa-migration)
-  $(Device/lantiqTpLink)
-  DEVICE_MODEL := TD-W8970
-  DEVICE_VARIANT := v1
-  TPLINK_FLASHLAYOUT := 8Mltq
-  TPLINK_HWID := 0x89700001
-  TPLINK_HWREV := 1
-  IMAGE_SIZE := 7680k
-  DEVICE_PACKAGES:= kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
-  SUPPORTED_DEVICES += TDW8970
-endef
-TARGET_DEVICES += tplink_tdw8970
-
-define Device/tplink_tdw8980
-  $(Device/dsa-migration)
-  $(Device/lantiqTpLink)
-  DEVICE_MODEL := TD-W8980
-  DEVICE_VARIANT := v1
-  TPLINK_FLASHLAYOUT := 8Mltq
-  TPLINK_HWID := 0x89800001
-  TPLINK_HWREV := 14
-  IMAGE_SIZE := 7680k
-  DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
-  SUPPORTED_DEVICES += TDW8980
-endef
-TARGET_DEVICES += tplink_tdw8980
-
 define Device/tplink_vr200
   $(Device/dsa-migration)
   $(Device/lantiqTpLink)

target/linux/lantiq/image/tp-link_legacy.mk

@@ -0,0 +1,46 @@
+DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
+
+define Device/dsa-migration
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/lantiqTpLink
+  DEVICE_VENDOR := TP-Link
+  TPLINK_HWREVADD := 0
+  TPLINK_HVERSION := 2
+  KERNEL := kernel-bin | append-dtb | lzma
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \
+	tplink-v2-header -s -V "ver. 1.0"
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 1.0" | \
+	check-size | append-metadata
+endef
+
+define Device/tplink_tdw8970
+  $(Device/dsa-migration)
+  $(Device/lantiqTpLink)
+  DEVICE_MODEL := TD-W8970
+  DEVICE_VARIANT := v1
+  TPLINK_FLASHLAYOUT := 8Mltq
+  TPLINK_HWID := 0x89700001
+  TPLINK_HWREV := 1
+  IMAGE_SIZE := 7680k
+  DEVICE_PACKAGES:= kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  SUPPORTED_DEVICES += TDW8970
+endef
+TARGET_DEVICES += tplink_tdw8970
+
+define Device/tplink_tdw8980
+  $(Device/dsa-migration)
+  $(Device/lantiqTpLink)
+  DEVICE_MODEL := TD-W8980
+  DEVICE_VARIANT := v1
+  TPLINK_FLASHLAYOUT := 8Mltq
+  TPLINK_HWID := 0x89800001
+  TPLINK_HWREV := 14
+  IMAGE_SIZE := 7680k
+  DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+  SUPPORTED_DEVICES += TDW8980
+endef
+TARGET_DEVICES += tplink_tdw8980

target/linux/lantiq/image/vr9.mk

@@ -5,17 +5,6 @@ define Device/dsa-migration
   DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
 endef
 
-define Device/alphanetworks_asl56026
-  $(Device/dsa-migration)
-  DEVICE_VENDOR := Alpha
-  DEVICE_MODEL := ASL56026
-  DEVICE_ALT0_VENDOR := BT Openreach
-  DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
-  IMAGE_SIZE := 7488k
-  DEFAULT := n
-endef
-TARGET_DEVICES += alphanetworks_asl56026
-
 define Device/arcadyan_arv7519rw22
   $(Device/dsa-migration)
   DEVICE_VENDOR := Arcadyan
@@ -33,16 +22,6 @@ define Device/arcadyan_arv7519rw22
 endef
 TARGET_DEVICES += arcadyan_arv7519rw22
 
-define Device/arcadyan_vg3503j
-  $(Device/dsa-migration)
-  DEVICE_VENDOR := BT Openreach
-  DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
-  IMAGE_SIZE := 8000k
-  SUPPORTED_DEVICES += VG3503J
-  DEFAULT := n
-endef
-TARGET_DEVICES += arcadyan_vg3503j
-
 define Device/arcadyan_vgv7510kw22-brn
   $(Device/dsa-migration)
   $(Device/lantiqBrnImage)
@@ -351,22 +330,6 @@ define Device/lantiq_easy80920-nor
 endef
 TARGET_DEVICES += lantiq_easy80920-nor
 
-define Device/netgear_dm200
-  $(Device/dsa-migration)
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := DM200
-  IMAGES := sysupgrade.bin factory.img
-  IMAGE/sysupgrade.bin := append-kernel | \
-	pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
-	pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
-	append-rootfs | pad-rootfs | check-size | append-metadata
-  IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
-  IMAGE_SIZE := 7872k
-  NETGEAR_BOARD_ID := DM200
-  NETGEAR_HW_ID := 29765233+8+0+64+0+0
-endef
-TARGET_DEVICES += netgear_dm200
-
 define Device/zyxel_p-2812hnu-f1
   $(Device/NAND)
   DEVICE_COMPAT_VERSION := 2.0

target/linux/lantiq/image/vr9_legacy.mk

@@ -0,0 +1,43 @@
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
+define Device/dsa-migration
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/alphanetworks_asl56026
+  $(Device/dsa-migration)
+  DEVICE_VENDOR := Alpha
+  DEVICE_MODEL := ASL56026
+  DEVICE_ALT0_VENDOR := BT Openreach
+  DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
+  IMAGE_SIZE := 7488k
+  DEFAULT := n
+endef
+TARGET_DEVICES += alphanetworks_asl56026
+
+define Device/arcadyan_vg3503j
+  $(Device/dsa-migration)
+  DEVICE_VENDOR := BT Openreach
+  DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
+  IMAGE_SIZE := 8000k
+  SUPPORTED_DEVICES += VG3503J
+  DEFAULT := n
+endef
+TARGET_DEVICES += arcadyan_vg3503j
+
+define Device/netgear_dm200
+  $(Device/dsa-migration)
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := DM200
+  IMAGES := sysupgrade.bin factory.img
+  IMAGE/sysupgrade.bin := append-kernel | \
+	pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+	pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+	append-rootfs | pad-rootfs | check-size | append-metadata
+  IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
+  IMAGE_SIZE := 7872k
+  NETGEAR_BOARD_ID := DM200
+  NETGEAR_HW_ID := 29765233+8+0+64+0+0
+endef
+TARGET_DEVICES += netgear_dm200

target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds

@@ -64,9 +64,6 @@ buffalo,wbmr-300hpd)
 	ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x20"
 	ucidef_set_led_default "router" "router" "green:router" "1"
 	;;
-netgear,dm200)
-	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
-	;;
 esac
 
 board_config_flush

target/linux/lantiq/xrx200/base-files/etc/board.d/02_network

@@ -11,10 +11,6 @@ lantiq_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
-	alphanetworks,asl56026|\
-	arcadyan,vg3503j)
-		ucidef_set_interface_lan "lan1 lan2"
-		;;
 	arcadyan,arv7519rw22)
 		ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
 		;;
@@ -46,14 +42,11 @@ lantiq_setup_interfaces()
 	avm,fritz7490|\
 	avm,fritz7490-micron|\
 	buffalo,wbmr-300hpd|\
-	tplink,tdw8970|\
-	tplink,tdw8980|\
 	tplink,vr200|\
 	tplink,vr200v)
 		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
 		;;
-	avm,fritz7412|\
+	avm,fritz7412)
-	netgear,dm200)
 		ucidef_set_interface_lan "lan"
 		;;
 	*)
@@ -95,14 +88,9 @@ lantiq_setup_macs()
 	local wan_mac=""
 
 	case "$board" in
-	alphanetworks,asl56026)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
-		;;
 	arcadyan,arv7519rw22)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
 		;;
-	arcadyan,vg3503j|\
 	lantiq,easy80920-nand|\
 	lantiq,easy80920-nor|\
 	zyxel,p-2812hnu-f1|\
@@ -148,14 +136,6 @@ lantiq_setup_macs()
 		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 		wan_mac="$lan_mac"
 		;;
-	netgear,dm200)
-		lan_mac=$(mtd_get_mac_binary ART 0x0)
-		wan_mac=$(macaddr_add "$lan_mac" 1)
-		;;
-	tplink,tdw8970|\
-	tplink,tdw8980)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
-		;;
 	tplink,vr200|\
 	tplink,vr200v)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)

target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom

@@ -31,10 +31,6 @@ case "$FIRMWARE" in
 				caldata_extract_ubi "caldata" 0x1000 0x1000
 				ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) 2) 0x10c
 				;;
-			tplink,tdw8970|\
-			tplink,tdw8980)
-				caldata_extract "boardconfig" 0x21000 0x1000
-				;;
 			*)
 				caldata_die "board $board is not supported yet"
 				;;

target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration

@@ -18,9 +18,7 @@ do_internet_led_rename()
 }
 
 case "$(board_name)" in
-alphanetworks,asl56026|\
 arcadyan,arv7519rw22|\
-arcadyan,vg3503j|\
 avm,fritz7360sl|\
 bt,homehub-v5a)
 	do_internet_led_rename

target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/01_leds

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+	led_internet="$(get_dt_led internet)"
+	if [ -n "$led_internet" ]; then
+		ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+		ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+	else
+		ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+	fi
+}
+
+board=$(board_name)
+
+case "$board" in
+netgear,dm200)
+	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/02_network

@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+lantiq_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	alphanetworks,asl56026|\
+	arcadyan,vg3503j)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	tplink,tdw8970|\
+	tplink,tdw8980)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		;;
+	netgear,dm200)
+		ucidef_set_interface_lan "lan"
+		;;
+	*)
+		ucidef_set_interface_lan 'eth0'
+		;;
+	esac
+}
+
+lantiq_setup_dsl()
+{
+	local board="$1"
+	local annex="a"
+
+	lantiq_setup_dsl_helper "$annex"
+}
+
+lantiq_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+
+	case "$board" in
+	alphanetworks,asl56026)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
+		;;
+	arcadyan,vg3503j)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(macaddr_add "$lan_mac" 1)
+		;;
+	netgear,dm200)
+		lan_mac=$(mtd_get_mac_binary ART 0x0)
+		wan_mac=$(macaddr_add "$lan_mac" 1)
+		;;
+	tplink,tdw8970|\
+	tplink,tdw8980)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+}
+
+board_config_update
+board=$(board_name)
+lantiq_setup_interfaces $board
+lantiq_setup_dsl $board
+lantiq_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/05_compat-version

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	*)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+case "$FIRMWARE" in
+	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
+	"ath9k-eeprom-pci-0000:02:00.0.bin")
+		board=$(board_name)
+
+		case "$board" in
+			tplink,tdw8970|\
+			tplink,tdw8980)
+				caldata_extract "boardconfig" 0x21000 0x1000
+				;;
+			*)
+				caldata_die "board $board is not supported yet"
+				;;
+		esac
+		;;
+esac

target/linux/lantiq/xrx200_legacy/base-files/etc/uci-defaults/01_led_migration

@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+. /lib/functions/migrations.sh
+
+do_internet_led_rename()
+{
+	config_load system
+
+	[ -n $(config_get led_internet name) ] || return
+	[ -z $(config_get led_dsl name) ] || return
+
+	uci rename system.led_internet=led_dsl
+	uci set system.led_dsl.name=dsl
+
+	logger -t led-migration "internet led renamed to dsl"
+}
+
+case "$(board_name)" in
+alphanetworks,asl56026|\
+arcadyan,vg3503j)
+	do_internet_led_rename
+	;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0

target/linux/lantiq/xrx200_legacy/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,16 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}

target/linux/lantiq/xrx200_legacy/config-6.6

@@ -0,0 +1,86 @@
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GRO_CELLS=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_IFX_VPE_EXT=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INTEL_XWAY_PHY=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+# CONFIG_ISDN is not set
+CONFIG_LANTIQ_XRX200=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_FPAFF is not set
+CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_NR_CPU_NR_MAP=2
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_VPE_APSP_API_MT=y
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_MT=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_NEED_SRCU_NMI_SAFE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LANTIQ_GSWIP=y
+CONFIG_NET_DSA_TAG_GSWIP=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_LANTIQ=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_PHYLINK=y
+CONFIG_PHY_LANTIQ_VRX200_PCIE=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
+CONFIG_QCOM_NET_PHYLIB=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SENSORS_LTQ_CPUTEMP=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

target/linux/lantiq/xrx200_legacy/profiles/00-default.mk

@@ -0,0 +1,9 @@
+define Profile/Default
+	NAME:=Default Profile
+	PRIORITY:=1
+endef
+
+define Profile/Default/Description
+	Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))

target/linux/lantiq/xrx200_legacy/target.mk

@@ -0,0 +1,22 @@
+ARCH:=mips
+SUBTARGET:=xrx200_legacy
+BOARDNAME:=XRX200 Legacy
+FEATURES+=atm ramdisk small_flash
+CPU_TYPE:=24kc
+
+DEFAULT_PACKAGES+=kmod-leds-gpio \
+	kmod-gpio-button-hotplug \
+	ltq-vdsl-vr9-vectoring-fw-installer \
+	kmod-ltq-vdsl-vr9-mei \
+	kmod-ltq-vdsl-vr9 \
+	kmod-ltq-atm-vr9 \
+	kmod-ltq-deu-vr9 \
+	kmod-ltq-ptm-vr9 \
+	ltq-vdsl-vr9-app \
+	dsl-vrx200-firmware-xdsl-a \
+	dsl-vrx200-firmware-xdsl-b-patch \
+	ppp-mod-pppoa
+
+define Target/Description
+	Lantiq XRX200 Legacy for boards with small flash
+endef