ramips: improve BDCOM WAP2100-SK support

Use the generic board detection instead of the target specific one as
all recent additions are doing.

Setup the USB led via devicetree (a58535771f) and include the required
driver by default. Merge the led userspace setting with an existing
identical case.

Use the wps led for boot status indication.

Move the partitions into a partition table node (6031ab345d) and drop
needless labels. Drop misplaced cells properties (53624c1702).

Cleanup the pinmux and only switch pins to gpio functions which a
referenced as gpio in the dts.

Match the maximum image size with the size of the firmware partition.

Signed-off-by: Mathias Kresin <dev@kresin.me>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -56,6 +56,10 @@ asl26555-16M)
 	ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
 	set_wifi_led "asl26555:green:wlan"
 	;;
+bdcom,wap2100-sk|\
+hiwifi,hc5861b)
+	set_wifi_led "$boardname:green:wlan2g"
+	;;
 broadway)
 	set_wifi_led "$boardname:red:wps_active"
 	;;
@@ -172,9 +176,6 @@ hg255d)
 	set_wifi_led "$boardname:green:wlan"
 	ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
 	;;
-hiwifi,hc5861b)
-	set_wifi_led "$boardname:green:wlan2g"
-	;;
 hpm)
 	ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
 	set_wifi_led "$boardname:green:wifi"
@@ -369,10 +370,6 @@ vocore-16M)
 w502u)
 	set_wifi_led "rt2800pci-phy0::radio"
 	;;
-wap2100-sk)
-	set_usb_led "$boardname:green:usb"
-	set_wifi_led "$boardname:green:wlan2g"
-	;;
 we1026-5g-16m)
 	ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
 	set_wifi_led "we1026-5g:green:wifi"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -198,6 +198,7 @@ ramips_setup_interfaces()
 	atp-52b|\
 	awm002-evb-4M|\
 	awm002-evb-8M|\
+	bdcom,wap2100-sk|\
 	c20i|\
 	dir-645|\
 	gl-mt300a|\
@@ -224,7 +225,6 @@ ramips_setup_interfaces()
 	ubnt-erx|\
 	ubnt-erx-sfp|\
 	ur-326n4g|\
-	wap2100-sk|\
 	wrtnode|\
 	wrtnode2p | \
 	wrtnode2r | \

target/linux/ramips/base-files/lib/ramips.sh

@@ -553,9 +553,6 @@ ramips_board_detect() {
 	*"W502U")
 		name="w502u"
 		;;
-	*"WAP2100-SK")
-		name="wap2100-sk"
-		;;
 	*"WCR-1166DS")
 		name="wcr-1166ds"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -31,6 +31,7 @@ platform_check_image() {
 	awm002-evb-4M|\
 	awm002-evb-8M|\
 	bc2|\
+	bdcom,wap2100-sk|\
 	bocco|\
 	broadway|\
 	c108|\
@@ -186,7 +187,6 @@ platform_check_image() {
 	widora,neo-32m|\
 	mqmaker,witi-256m|\
 	mqmaker,witi-512m|\
-	wap2100-sk|\
 	we1026-5g-16m|\
 	wizfi630a|\
 	wl-330n|\

target/linux/ramips/dts/BDCOM-WAP2100-SK.dts

@@ -6,9 +6,14 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	compatible = "bdcom,bdcom-wap2100-sk", "ralink,mt7620a-soc";
+	compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
 	model = "BDCOM WAP2100-SK";
 
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+	};
+
 	chosen {
 		bootargs = "console=ttyS0,115200";
 	};
@@ -19,9 +24,11 @@
 		usb {
 			label = "wap2100-sk:green:usb";
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led_power: wps {
 			label = "wap2100-sk:green:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
@@ -34,8 +41,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		wps {
@@ -55,34 +60,37 @@
 &spi0 {
 	status = "okay";
 
-	en25q128@0 {
+	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
 
-		partition@0 {
+		partitions {
-			label = "u-boot";
+			#address-cells = <1>;
-			reg = <0x0 0x30000>;
+			#size-cells = <1>;
-			read-only;
-		};
 
-		partition@30000 {
+			partition@0 {
-			label = "u-boot-env";
+				label = "u-boot";
-			reg = <0x30000 0x10000>;
+				reg = <0x0 0x30000>;
-			read-only;
+				read-only;
-		};
+			};
 
-		factory: partition@40000 {
+			partition@30000 {
-			label = "factory";
+				label = "u-boot-env";
-			reg = <0x40000 0x10000>;
+				reg = <0x30000 0x10000>;
-			read-only;
+				read-only;
-		};
+			};
 
-		firmware: partition@50000 {
+			factory: partition@40000 {
-			label = "firmware";
+				label = "factory";
-			reg = <0x50000 0xf70000>;
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0xf70000>;
+			};
 		};
 	};
 };
@@ -123,7 +131,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		default {
-			ralink,group = "wdt", "mdio", "spi refclk", "uartf", "wled";
+			ralink,group = "spi refclk", "uartf", "wled";
 			ralink,function = "gpio";
 		};
 	};

target/linux/ramips/image/mt7620.mk

@@ -80,14 +80,13 @@ define Device/ArcherMR200
 endef
 TARGET_DEVICES += ArcherMR200
 
-define Device/BDCOM-WAP2100-SK
+define Device/bdcom_wap2100-sk
   DTS := BDCOM-WAP2100-SK
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  IMAGE_SIZE := 15808k
-  SUPPORTED_DEVICES += wap2100-sk
   DEVICE_TITLE := BDCOM WAP2100-SK (ZTE ZXECS EBG3130)
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
 endef
-TARGET_DEVICES += BDCOM-WAP2100-SK
+TARGET_DEVICES += bdcom_wap2100-sk
 
 define Device/bocco
   DTS := BOCCO