mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-21 03:55:06 +00:00
ipq40xx: add support for Extreme Networks WS-AP3915i
Hardware
--------
Qualcomm IPQ4029 WiSoC
2T2R 802.11 abgn
2T2R 802.11 nac
Macronix MX25L25635E SPI-NOR (32M)
512M DDR3 RAM
1x Gigabit LAN
1x Cisco RJ-45 Console port
Settings: 115200 8N1
Installation
------------
1. Attach to the Console port. Power up the device and press the s key
to interrupt autoboot.
2. The default username / password to the bootloader is admin / new2day
3. Update the bootcommand to allow loading OpenWrt.
$ setenv ramboot_openwrt "setenv serverip 192.168.1.66;
setenv ipaddr 192.168.1.1; tftpboot 0x86000000 openwrt-3915.bin;
bootm"
$ setenv boot_openwrt "sf probe;
sf read 0x88000000 0x280000 0xc00000; bootm 0x88000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Download the OpenWrt initramfs image. Serve it using a TFTP server as
"openwrt-3915.bin" at 192.1681.66.
5. Download & boot the OpenWrt initramfs image on the access point.
$ run ramboot_openwrt
6. Wait for OpenWrt to start.
7. Download and transfer the sysupgrade image to the device using e.g.
SCP.
8. Install OpenWrt to the device using "sysupgrade"
$ sysupgrade -n /path/to/openwrt.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
02f81494bb
commit
e16a0e7e88
@ -28,6 +28,7 @@ ipq40xx_setup_interfaces()
|
||||
dlink,dap-2610 |\
|
||||
engenius,eap1300|\
|
||||
engenius,emd1|\
|
||||
extreme-networks,ws-ap3915i|\
|
||||
meraki,mr33|\
|
||||
meraki,mr74|\
|
||||
mikrotik,lhgg-60ad|\
|
||||
|
||||
@ -104,6 +104,10 @@ case "$FIRMWARE" in
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
|
||||
;;
|
||||
extreme-networks,ws-ap3915i)
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
|
||||
;;
|
||||
linksys,ea8300 |\
|
||||
linksys,mr8300)
|
||||
caldata_extract "ART" 0x1000 0x2f20
|
||||
@ -186,6 +190,10 @@ case "$FIRMWARE" in
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
|
||||
;;
|
||||
extreme-networks,ws-ap3915i)
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
|
||||
;;
|
||||
linksys,ea8300 |\
|
||||
linksys,mr8300)
|
||||
caldata_extract "ART" 0x5000 0x2f20
|
||||
|
||||
@ -15,6 +15,9 @@ preinit_set_mac_address() {
|
||||
base_mac=$(cat /sys/class/net/eth0/address)
|
||||
ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
|
||||
;;
|
||||
extreme-networks,ws-ap3915i)
|
||||
ip link set dev eth0 address $(mtd_get_mac_ascii CFG1 ethaddr)
|
||||
;;
|
||||
linksys,ea8300|\
|
||||
linksys,mr8300)
|
||||
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
|
||||
@ -0,0 +1,272 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "Extreme Networks WS-AP3915i";
|
||||
compatible = "extreme-networks,ws-ap3915i";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system_green;
|
||||
led-failsafe = &led_system_amber;
|
||||
led-running = &led_system_green;
|
||||
led-upgrade = &led_system_amber;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
soc {
|
||||
rng@22000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio@90000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
ess-psgmii@98000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
status = "okay";
|
||||
switch_lan_bmp = <0x20>;
|
||||
switch_wan_bmp = <0x00>;
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
qcom,num_gmac = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system_green: system_green {
|
||||
label = "green:system";
|
||||
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_system_amber: system_amber {
|
||||
label = "amber:system";
|
||||
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wlan24_green: wlan24_green {
|
||||
label = "green:wlan24";
|
||||
gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led_wlan24_amber: wlan24_amber {
|
||||
label = "amber:wlan24";
|
||||
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wlan5_green: wlan5_green {
|
||||
label = "green:wlan5";
|
||||
gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led_wlan5_amber: wlan5_amber {
|
||||
label = "amber:wlan5";
|
||||
gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
iot {
|
||||
label = "blue:iot";
|
||||
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART >;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
pinctrl-0 = <&serial_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio_pinmux {
|
||||
mux_1 {
|
||||
pins = "gpio6";
|
||||
function = "mdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
mux_2 {
|
||||
pins = "gpio7";
|
||||
function = "mdc";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi_0_pinmux {
|
||||
pin {
|
||||
function = "blsp_spi0";
|
||||
pins = "gpio13", "gpio14", "gpio15";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pin_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio12";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
serial_pins: serial_0_pinmux {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "blsp_uart0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* Layout for 0x0 - 0xe0000 unknown */
|
||||
|
||||
partition@e0000 {
|
||||
label = "CFG1";
|
||||
reg = <0xe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "BootBAK";
|
||||
reg = <0xf0000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@160000 {
|
||||
label = "WINGCFG1";
|
||||
reg = <0x160000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@170000 {
|
||||
label = "ART";
|
||||
reg = <0x170000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "BootPRI";
|
||||
reg = <0x180000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f0000 {
|
||||
label = "WINGCFG2";
|
||||
reg = <0x1f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "FS";
|
||||
reg = <0x200000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@280000 {
|
||||
label = "firmware";
|
||||
reg = <0x280000 0x1d60000>;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "CFG2";
|
||||
reg = <0x1fe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,forced_speed = <1000>;
|
||||
qcom,forced_duplex = <1>;
|
||||
vlan_tag = <1 0x20>;
|
||||
};
|
||||
@ -519,6 +519,18 @@ define Device/engenius_ens620ext
|
||||
endef
|
||||
TARGET_DEVICES += engenius_ens620ext
|
||||
|
||||
define Device/extreme-networks_ws-ap3915i
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Extreme Networks
|
||||
DEVICE_MODEL := WS-AP3915i
|
||||
IMAGE_SIZE := 30080k
|
||||
SOC := qcom-ipq4029
|
||||
BLOCKSIZE := 128k
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
|
||||
endef
|
||||
TARGET_DEVICES += extreme-networks_ws-ap3915i
|
||||
|
||||
define Device/ezviz_cs-w3-wd1200g-eup
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := EZVIZ
|
||||
|
||||
Loading…
Reference in New Issue
Block a user