ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

qualcommax: remove usage of malibu_first_phy_addr

Browse Source 
Now that Malibu (QCA807x) PHY is using the upstream driver, we dont need
support to define address of the first PHY in package, so remove the
malibu_first_phy_addr DTS property.

Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Robert Marko 2024-02-13 21:48:52 +01:00
parent d4800a1167
commit deda92c16c
2 changed files with 0 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
View File

@ -414,7 +414,6 @@
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT6)>; /* lan port bitmap */
switch_wan_bmp = <ESS_PORT5>; /* wan port bitmap */
malibu_first_phy_addr = <16>; /* PHY addr of the first malibu PHY */
switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance2*/

18
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi
View File

@ -23,24 +23,6 @@
switch_access_mode = "local bus";
switch_cpu_bmp = <ESS_PORT0>; /* cpu port bitmap */
switch_inner_bmp = <ESS_PORT7>; /*inner port bitmap*/
/* This is a special binding that controls how the malibu PHY are
* init. This value reflect the PHY addr of the first malibu PHY.
* Malibu PHY are in a bundle of 5 PHY.
* Some device might have some port not connected.
* SSDK still needs the addrs of the first PHY (even if not connected)
* to correctly setup the malibu PHY.
*
* This is needed as previously SSDK based this on the port bmp, but
* this can be problematic now that we specify correct bmp.
*
* Most common configuration have the malibu PHY placed at 0.
* But some device might have it placed at address 16.
* To drive the correct value, check the port id of the malibu PHY
* and try to understand what is the first one in devices where some
* port are missing. port_phyinfo is normally the way to go to derive
* this value in the few special cases.
*/
malibu_first_phy_addr = <0>;
clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>,
<&gcc GCC_CMN_12GPLL_SYS_CLK>,
<&gcc GCC_UNIPHY0_AHB_CLK>,