ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection ()

SVN-Revision: 18699
This commit is contained in:
Felix Fietkau 2009-12-08 14:06:18 +00:00
parent df35ee622f
commit ddc2e2270b
3 changed files with 5 additions and 2 deletions
target/linux
ar71xx
base-files/etc/defconfig/wrt160nl
files/arch/mips/ar71xx
generic-2.6/files/drivers/net/phy

@ -15,7 +15,7 @@ config interface wan
option ifname eth1
option proto dhcp
config switch eth1
config switch eth0
option reset 1
option enable_vlan 1

@ -124,7 +124,7 @@ static void __init wrt160nl_setup(void)
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.phy_mask = 0x01;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;

@ -913,6 +913,9 @@ rtl8306_fixup(struct phy_device *pdev)
struct rtl_priv priv;
u16 chipid;
if (pdev->addr != 0)
return 0;
priv.page = -1;
priv.bus = pdev->bus;
chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);