ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 23:42:43 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

ath79: Add support for OpenMesh MR600 v2

Browse Source 
Device specifications:
======================

* Qualcomm/Atheros AR9344 rev 2
* 560/450/225 MHz (CPU/DDR/AHB)
* 128 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2T2R 2.4 GHz Wi-Fi
* 2T2R 5 GHz Wi-Fi
* 8x GPIO-LEDs (6x wifi, 1x wps, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 1x ethernet
  - AR8035 ethernet PHY (RGMII)
  - 10/100/1000 Mbps Ethernet
  - 802.3af POE
  - used as LAN interface
* 12-24V 1A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
[rebase, add LED migration]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Sven Eckelmann 2020-11-23 13:41:34 +01:00 committed by Adrian Schmutzler
parent 4b35999588
commit d9a3af46d8
8 changed files with 87 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
package/boot/uboot-envtools/Makefile
View File

@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=uboot-envtools
PKG_DISTNAME:=u-boot
PKG_VERSION:=2020.04
PKG_RELEASE:=17
PKG_RELEASE:=18
PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \

1
package/boot/uboot-envtools/files/ath79
View File

@ -49,6 +49,7 @@ netgear,wnr612-v2|\
ocedo,koala|\
ocedo,raccoon|\
openmesh,mr600-v1|\
openmesh,mr600-v2|\
openmesh,om5p|\
openmesh,om5p-ac-v2|\
samsung,wam250|\

71
target/linux/ath79/dts/ar9344_openmesh_mr600-v2.dts Normal file
View File

@ -0,0 +1,71 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344_openmesh_mr600.dtsi"
/ {
compatible = "openmesh,mr600-v2", "qca,ar9344";
model = "OpenMesh MR600 v2";
aliases {
led-boot = &led_power_blue;
led-failsafe = &led_power_blue;
led-running = &led_power_blue;
led-upgrade = &led_power_blue;
};
leds {
compatible = "gpio-leds";
wifi5g_red {
label = "red:wifi5g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wps_blue {
label = "blue:wps";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_power_blue: power_blue {
label = "blue:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi2g_green {
label = "green:wifi2g";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi2g_yellow {
label = "yellow:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
wifi2g_red {
label = "red:wifi2g";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wifi5g_green {
label = "green:wifi5g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi5g_yellow {
label = "yellow:wifi5g";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
/* hw_margin_ms is actually 300s but driver limits it to 60s */
hw_margin_ms = <60000>;
always-running;
};
};

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -47,6 +47,7 @@ ath79_setup_interfaces()
ocedo,koala|\
ocedo,raccoon|\
openmesh,mr600-v1|\
openmesh,mr600-v2|\
pcs,cap324|\
pisen,ts-d084|\
pisen,wmb001n|\

3
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -120,7 +120,8 @@ case "$FIRMWARE" in
ubnt,rocket-m)
caldata_extract "art" 0x1000 0x1000
;;
openmesh,mr600-v1)
openmesh,mr600-v1|\
openmesh,mr600-v2)
caldata_extract "ART" 0x5000 0x440
;;
wd,mynet-n750)

3
target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
View File

@ -20,6 +20,9 @@ glinet,gl-mifi)
openmesh,mr600-v1)
migrate_leds ":wlan58=:wifi5g"
;;
openmesh,mr600-v2)
migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g"
;;
pcs,cap324)
migrate_leds "lan:amber=amber:lan" "lan:green=green:lan"
;;

1
target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
View File

@ -51,6 +51,7 @@ platform_do_upgrade() {
redboot_fis_do_upgrade "$1" linux
;;
openmesh,mr600-v1|\
openmesh,mr600-v2|\
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\

7
target/linux/ath79/image/generic.mk
View File

@ -1545,6 +1545,13 @@ define Device/openmesh_mr600-v1
endef
TARGET_DEVICES += openmesh_mr600-v1
define Device/openmesh_mr600-v2
$(Device/openmesh_mr600-common)
DEVICE_VARIANT := v2
SUPPORTED_DEVICES += mr600v2
endef
TARGET_DEVICES += openmesh_mr600-v2
define Device/openmesh_om2p-common
DEVICE_VENDOR := OpenMesh
DEVICE_PACKAGES := uboot-envtools