diff --git a/target/linux/ath79/dts/qca9533_kuwfi_c910.dts b/target/linux/ath79/dts/qca9533_kuwfi_c910.dts
new file mode 100644
index 00000000000..a705aa8686b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_kuwfi_c910.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "kuwfi,c910", "qca,qca9533";
+	model = "KuWFi C910";
+
+	aliases {
+		label-mac-device = &eth1;
+		led-boot = &internet_red;
+		led-failsafe = &internet_red;
+		led-upgrade = &internet_red;
+	};
+
+	virtual_flash {
+		compatible = "mtd-concat";
+		devices = <&fwconcat0 &fwconcat1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x0>;
+				label = "firmware";
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		internet_blue {
+			label = "blue:internet";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		internet_green {
+			label = "green:internet";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "white:wan";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "white:lan2";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		// gpio 12 enables or disables LTE (Quectel EC200T)
+
+		internet_red: internet_red {
+			label = "red:internet";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1 {
+			label = "white:lan1";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "u-boot-env";
+				reg = <0x020000 0x010000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x030000 0x020000>;
+				read-only;
+			};
+
+			fwconcat0: partition@50000 {
+				label = "fwconcat0";
+				reg = <0x050000 0xe30000>;
+			};
+
+			partition@e80000 {
+				label = "loader";
+				reg = <0xe80000 0x10000>;
+			};
+
+			fwconcat1: partition@e90000 {
+				label = "fwconcat1";
+				reg = <0xe90000 0x160000>;
+			};
+
+			partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				calibration_art_1000: macaddr@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				macaddr_art_1002: macaddr@1002 {
+					reg = <0x1002 0x6>;
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy0>;
+
+	nvmem-cells = <&macaddr_art_1002>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&eth1 {
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_art_1002>;
+	nvmem-cell-names = "mac-address";
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-swap = <1>;
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	nvmem-cells = <&calibration_art_1000>;
+	nvmem-cell-names = "calibration";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index f0610f39e91..5855d2a9287 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -268,6 +268,11 @@ hiwifi,hc6361)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
 	ucidef_set_led_wlan "wlan" "WLAN" "blue:wlan" "phy0tpt"
 	;;
+kuwfi,c910)
+	ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "white:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "white:lan2" "switch0" "0x02"
+	;;
 meraki,mr12|\
 tplink,cpe210-v2|\
 tplink,cpe210-v3)
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 529d33782fa..92541cd9f8b 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -347,6 +347,11 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
+	kuwfi,c910)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:2" "4:lan:1"
+		;;
 	letv,lba-047-ch)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 9c209b041f1..d66684a124e 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1583,6 +1583,22 @@ define Device/joyit_jt-or750i
 endef
 TARGET_DEVICES += joyit_jt-or750i
 
+define Device/kuwfi_c910
+  $(Device/loader-okli-uimage)
+  SOC := qca9533
+  DEVICE_VENDOR := KuWFi
+  DEVICE_MODEL := C910
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-cdc-ether comgt-ncm
+  LOADER_FLASH_OFFS := 0x50000
+  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+  IMAGE_SIZE := 15936k
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+	append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
+	append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += kuwfi_c910
+
 define Device/letv_lba-047-ch
   $(Device/loader-okli-uimage)
   SOC := qca9531