move kernel support to 2.6.28.7

SVN-Revision: 14747

target/linux/ifxmips/Makefile

@@ -10,9 +10,8 @@ ARCH:=mips
 BOARD:=ifxmips
 BOARDNAME:=Infineon Mips
 FEATURES:=squashfs jffs2
-SUBTARGETS:=generic nfs
+
-LINUX_VERSION:=2.6.26.8
+LINUX_VERSION:=2.6.28.7
-#LINUX_VERSION:=2.6.27.19
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=uboot-ifxmips hostapd-mini
@@ -21,4 +20,11 @@ define Target/Description
 	Build firmware images for Infineon Mips Controllers
 endef
 
+ifeq ($(KERNEL_PATCHVER),2.6.28)
+  define Kernel/Prepare
+	$(call Kernel/Prepare/Default)
+	mv $(LINUX_DIR)/include/asm-mips/* $(LINUX_DIR)/arch/mips/include/asm/
+  endef
+endif
+
 $(eval $(call BuildTarget))

target/linux/ifxmips/config-2.6.28

@@ -0,0 +1,216 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR2=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FREEZER is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIO_DEVICE=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IDE is not set
+CONFIG_IFXMIPS=y
+CONFIG_IFXMIPS_EEPROM=y
+CONFIG_IFXMIPS_GPIO_RST_BTN=y
+# CONFIG_IFXMIPS_MEI is not set
+CONFIG_IFXMIPS_MII0=y
+# CONFIG_IFXMIPS_PROM_ASC0 is not set
+CONFIG_IFXMIPS_PROM_ASC1=y
+CONFIG_IFXMIPS_SSC=y
+CONFIG_IFXMIPS_WDT=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KALLSYMS=y
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_IFXMIPS=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_IFXMIPS=y
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+# CONFIG_R6040 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_IFXMIPS=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SWAP is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_ZONE_DMA_FLAG=0

target/linux/ifxmips/nfs/config-2.6.28

@@ -0,0 +1,23 @@
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_LOCKD=y
+# CONFIG_NETFILTER is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y

target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch

@@ -0,0 +1,34 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -1514,7 +1514,16 @@ void __cpuinit per_cpu_trap_init(void)
+ 	 */
+ 	if (cpu_has_mips_r2) {
+ 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++		if (!cp0_compare_irq)
++			cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++
+ 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
++		if (!cp0_perfcount_irq)
++			cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++
++		if (arch_fixup_c0_irqs)
++			arch_fixup_c0_irqs();
++
+ 		if (cp0_perfcount_irq == cp0_compare_irq)
+ 			cp0_perfcount_irq = -1;
+ 	} else {
+--- a/arch/mips/include/asm/irq.h
++++ b/arch/mips/include/asm/irq.h
+@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
+  * IE7.  Since R2 their number has to be read from the c0_intctl register.
+  */
+ #define CP0_LEGACY_COMPARE_IRQ 7
++#define CP0_LEGACY_PERFCNT_IRQ 7
+ 
+ extern int cp0_compare_irq;
+ extern int cp0_perfcount_irq;
+ 
++extern void __weak arch_fixup_c0_irqs(void);
++
++
+ #endif /* _ASM_IRQ_H */

target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch

@@ -0,0 +1,33 @@
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -21,6 +21,22 @@
+ 
+ #ifndef CONFIG_MIPS_MT_SMTC
+ 
++/*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++	do { \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++		irq_disable_hazard(); \
++	} while (0)
++
+ static int mips_next_event(unsigned long delta,
+                            struct clock_event_device *evt)
+ {
+@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
+ 	cnt = read_c0_count();
+ 	cnt += delta;
+ 	write_c0_compare(cnt);
++	compare_change_hazard();
+ 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ 	return res;
+ }

target/linux/ifxmips/patches-2.6.28/100-board.patch

@@ -0,0 +1,71 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -79,6 +79,22 @@ config MIPS_COBALT
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+ 	select GENERIC_HARDIRQS_NO__DO_IRQ
+ 
++config IFXMIPS
++	bool "Infineon Twinpass, Danube, Amazon-SE"
++	select DMA_NONCOHERENT
++	select IRQ_CPU
++	select CEVT_R4K
++	select CSRC_R4K
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_CPU_MIPS32_R2
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_HAS_EARLY_PRINTK
++	select HW_HAS_PCI
++	select GENERIC_GPIO
++	select SWAP_IO_SPACE
++	select GENERIC_HARDIRQS_NO__DO_IRQ
++
+ config MACH_DECSTATION
+ 	bool "DECstations"
+ 	select BOOT_ELF32
+@@ -607,6 +623,7 @@ source "arch/mips/sgi-ip27/Kconfig"
+ source "arch/mips/sibyte/Kconfig"
+ source "arch/mips/txx9/Kconfig"
+ source "arch/mips/vr41xx/Kconfig"
++source "arch/mips/ifxmips/Kconfig"
+ 
+ endmenu
+ 
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -285,6 +285,13 @@ cflags-$(CONFIG_MIPS_COBALT)	+= -I$(srct
+ load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
+ 
+ #
++# Infineon IFXMIPS
++#
++core-$(CONFIG_IFXMIPS)		+= arch/mips/ifxmips/
++cflags-$(CONFIG_IFXMIPS)	+= -I$(srctree)/arch/mips/include/asm/mach-ifxmips
++load-$(CONFIG_IFXMIPS)		+= 0xffffffff80002000
++
++#
+ # DECstation family
+ #
+ core-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/
+--- a/arch/mips/include/asm/bootinfo.h
++++ b/arch/mips/include/asm/bootinfo.h
+@@ -57,6 +57,12 @@
+ #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
+ #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+ 
++/*
++ * Valid machtype for group IFXMIPS
++ */
++#define MACH_GROUP_IFXMIPS     29
++#define MACH_INFINEON_IFXMIPS  0
++
+ #define CL_SIZE			COMMAND_LINE_SIZE
+ 
+ extern char *system_type;
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc
+ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+ obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
++obj-$(CONFIG_IFXMIPS)		+= pci-ifxmips.o ops-ifxmips.o

target/linux/ifxmips/patches-2.6.28/110-drivers.patch

@@ -0,0 +1,152 @@
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
+ obj-$(CONFIG_JS_RTC)		+= js-rtc.o
+ js-rtc-y = rtc.o
+ 
++obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
++obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
++obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
++
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
+ 
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel)	+= nettel.o
+ obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
+ obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
+ obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
++obj-$(CONFIG_MTD_IFXMIPS)	+= ifxmips.o
+ obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
+ obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
+ obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -343,6 +343,12 @@ config MACB
+ 
+ source "drivers/net/arm/Kconfig"
+ 
++config IFXMIPS_MII0
++	tristate "Infineon IFXMips eth0 driver"
++	depends on IFXMIPS
++	help
++	  Support for the MII0 inside the IFXMips SOC
++
+ config AX88796
+ 	tristate "ASIX AX88796 NE2000 clone support"
+ 	depends on ARM || MIPS || SUPERH
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM
+ 	  Currently, only 8250 compatible ports are supported, but
+ 	  others can easily be added.
+ 
++config SERIAL_IFXMIPS
++	bool "IFXMips serial driver"
++	depends on IFXMIPS
++	select SERIAL_CORE
++	select SERIAL_CORE_CONSOLE
++	help
++	  Driver for the ifxmipss built in ASC hardware
++
+ config SERIAL_QE
+ 	tristate "Freescale QUICC Engine serial port support"
+ 	depends on QUICC_ENGINE
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
+ 
+ # PARISC Architecture
+ 
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
+ obj-$(CONFIG_NIU) += niu.o
+ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+-
++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
+ 	  If you say N, all options in this submenu will be skipped and disabled.
+ 
+ if CRYPTO_HW
++config CRYPTO_DEV_IFXMIPS
++	tristate "Support for IFXMIPS Data Encryption Unit"
++	depends on IFXMIPS
+ 
+ config CRYPTO_DEV_PADLOCK
+ 	tristate "Support for VIA PadLock ACE"
+--- a/drivers/crypto/Makefile
++++ b/drivers/crypto/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
+ obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -321,3 +321,10 @@ config USB_HWA_HCD
+ 
+ 	  To compile this driver a module, choose M here: the module
+ 	  will be called "hwa-hc".
++
++config USB_DWC_HCD
++	tristate "IFXMIPS USB Host Controller Driver"
++	depends on USB && IFXMIPS
++	default y
++	help
++       Danube USB Host Controller
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -171,6 +171,12 @@ config LEDS_DA903X
+ 	  This option enables support for on-chip LED drivers found
+ 	  on Dialog Semiconductor DA9030/DA9034 PMICs.
+ 
++config LEDS_IFXMIPS
++	tristate "LED Support for IFXMIPS LEDs"
++	depends on LEDS_CLASS && IFXMIPS
++	help
++	  This option enables support for the IFXMIPS LEDs.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+ obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
+ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
+ obj-$(CONFIG_LEDS_HP_DISK)		+= leds-hp-disk.o
++obj-$(CONFIG_LEDS_IFXMIPS)		+= leds-ifxmips.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -747,6 +747,12 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config IFXMIPS_WDT
++	bool "IFXMips watchdog"
++	depends on IFXMIPS
++	help
++	  Hardware driver for the IFXMIPS Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture

target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch

@@ -0,0 +1,13 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1069,7 +1069,9 @@ static int __xipram do_write_oneword(str
+ 	int retry_cnt = 0;
+ 
+ 	adr += chip->start;
+-
++#ifdef CONFIG_IFXMIPS
++	adr ^= 2;
++#endif
+ 	spin_lock(chip->mutex);
+ 	ret = get_chip(map, chip, adr, FL_WRITING);
+ 	if (ret) {

target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch

@@ -0,0 +1,11 @@
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT */
+ 

target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch

@@ -0,0 +1,12 @@
+--- a/kernel/irq/chip.c
++++ b/kernel/irq/chip.c
+@@ -524,6 +524,9 @@ handle_percpu_irq(unsigned int irq, stru
+ 
+ 	kstat_incr_irqs_this_cpu(irq, desc);
+ 
++	if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
++		return;
++
+ 	if (desc->chip->ack)
+ 		desc->chip->ack(irq);
+