mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
ipq806x: add kernel 4.14 support
- Rebased the patches for 4.14
- Dropped spi-qup and 0027, 0028, 0029
clk patches since it's already included
in upstream.
Tested on IPQ AP148 Board:
1) NOR boot and NAND boot
2) Tested USB and PCIe interfaces
3) WDOG test
4) cpu frequency scaling
5) ethernet, 2G and 5G WiFi
6) ubi sysupgrade
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
(cherry picked from commit 93dd2f7211)
This commit is contained in:
Ram Chandra Jangir
John Crispin
parent
9361c359e4
commit
d805812e75
502
target/linux/ipq806x/config-4.14
Normal file
502
target/linux/ipq806x/config-4.14
Normal file
@ -0,0 +1,502 @@
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
# CONFIG_AMBA_PL08X is not set
|
||||
CONFIG_APQ_GCC_8084=y
|
||||
CONFIG_APQ_MMCC_8084=y
|
||||
CONFIG_AR8216_PHY=y
|
||||
CONFIG_ARCH_CLOCKSOURCE_DATA=y
|
||||
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
|
||||
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
|
||||
CONFIG_ARCH_HAS_SG_CHAIN=y
|
||||
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_MDM9615 is not set
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MSM8960=y
|
||||
CONFIG_ARCH_MSM8974=y
|
||||
CONFIG_ARCH_MSM8X60=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
|
||||
CONFIG_ARCH_MULTI_V6_V7=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_QCOM=y
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
||||
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
|
||||
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
|
||||
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
|
||||
CONFIG_ARM_CPUIDLE=y
|
||||
CONFIG_ARM_CPU_SUSPEND=y
|
||||
# CONFIG_ARM_CPU_TOPOLOGY is not set
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||
# CONFIG_ARM_LPAE is not set
|
||||
CONFIG_ARM_PATCH_IDIV=y
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_QCOM_CPUFREQ=y
|
||||
CONFIG_ARM_QCOM_CPUIDLE=y
|
||||
# CONFIG_ARM_SMMU is not set
|
||||
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_ARM_THUMBEE is not set
|
||||
CONFIG_ARM_UNWIND=y
|
||||
CONFIG_ARM_VIRT_EXT=y
|
||||
# CONFIG_BINFMT_FLAT is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
|
||||
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_BUS_TOPOLOGY_ADHOC=y
|
||||
# CONFIG_CACHE_L2X0 is not set
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLKSRC_PROBE=y
|
||||
CONFIG_CLKSRC_QCOM=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMMON_CLK_QCOM=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_32v6K=y
|
||||
CONFIG_CPU_32v7=y
|
||||
CONFIG_CPU_ABRT_EV7=y
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
||||
CONFIG_CPU_CACHE_V7=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
||||
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_PABRT_V7=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CPU_TLB_V7=y
|
||||
CONFIG_CPU_V7=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_CTR=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_DEV_QCE=y
|
||||
CONFIG_CRYPTO_DRBG=y
|
||||
CONFIG_CRYPTO_DRBG_HMAC=y
|
||||
CONFIG_CRYPTO_DRBG_MENU=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_GF128MUL=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HMAC=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_JITTERENTROPY=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_NULL=y
|
||||
CONFIG_CRYPTO_NULL2=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_RNG_DEFAULT=y
|
||||
CONFIG_CRYPTO_SEQIV=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_CRYPTO_XTS=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_GPIO=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_DEBUG_LL_INCLUDE="debug/msm.S"
|
||||
CONFIG_DEBUG_QCOM_UARTDM=y
|
||||
# CONFIG_DEBUG_UART_8250 is not set
|
||||
CONFIG_DEBUG_UART_PHYS=0x16340000
|
||||
CONFIG_DEBUG_UART_VIRT=0xf6340000
|
||||
CONFIG_DEBUG_UNCOMPRESS=y
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
# CONFIG_DWMAC_DWC_QOS_ETH is not set
|
||||
# CONFIG_DWMAC_GENERIC is not set
|
||||
CONFIG_DWMAC_IPQ806X=y
|
||||
CONFIG_DYNAMIC_DEBUG=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_ETHERNET_PACKET_MANGLE=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
||||
CONFIG_HAVE_ARCH_BITREVERSE=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
CONFIG_HAVE_ARM_ARCH_TIMER=y
|
||||
CONFIG_HAVE_ARM_SMCCC=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_CBPF_JIT=y
|
||||
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_CLK_PREPARE=y
|
||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_OPTPROBES=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PERF_REGS=y
|
||||
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HAVE_UID16=y
|
||||
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
|
||||
CONFIG_HIGHMEM=y
|
||||
# CONFIG_HIGHPTE is not set
|
||||
CONFIG_HWMON=y
|
||||
CONFIG_HWSPINLOCK=y
|
||||
CONFIG_HWSPINLOCK_QCOM=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_MSM=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_QUP=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IOMMU_HELPER=y
|
||||
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
|
||||
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
|
||||
CONFIG_IOMMU_SUPPORT=y
|
||||
# CONFIG_IPQ_GCC_4019 is not set
|
||||
CONFIG_IPQ_GCC_806X=y
|
||||
# CONFIG_IPQ_GCC_8074 is not set
|
||||
# CONFIG_IPQ_LCC_806X is not set
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_KPSS_XCC=y
|
||||
CONFIG_KRAITCC=y
|
||||
CONFIG_KRAIT_CLOCKS=y
|
||||
CONFIG_KRAIT_L2_ACCESSORS=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCKUP_DETECTOR=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
CONFIG_MDIO_GPIO=y
|
||||
# CONFIG_MDM_GCC_9615 is not set
|
||||
# CONFIG_MDM_LCC_9615 is not set
|
||||
# CONFIG_MFD_MAX77620 is not set
|
||||
CONFIG_MFD_QCOM_RPM=y
|
||||
# CONFIG_MFD_SPMI_PMIC is not set
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||
CONFIG_MIGHT_HAVE_PCI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
CONFIG_MMC_QCOM_DML=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_MSM=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MSM_BUS_SCALING=y
|
||||
CONFIG_MSM_GCC_8660=y
|
||||
# CONFIG_MSM_GCC_8916 is not set
|
||||
CONFIG_MSM_GCC_8960=y
|
||||
CONFIG_MSM_GCC_8974=y
|
||||
# CONFIG_MSM_GCC_8994 is not set
|
||||
# CONFIG_MSM_GCC_8996 is not set
|
||||
# CONFIG_MSM_IOMMU is not set
|
||||
# CONFIG_MSM_LCC_8960 is not set
|
||||
CONFIG_MSM_MMCC_8960=y
|
||||
CONFIG_MSM_MMCC_8974=y
|
||||
# CONFIG_MSM_MMCC_8996 is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_QCOM=y
|
||||
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
|
||||
CONFIG_MTD_QCOM_SMEM_PARTS=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTI_IRQ_HANDLER=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_HWMON=y
|
||||
CONFIG_NET_DSA_QCA8K=y
|
||||
CONFIG_NET_DSA_TAG_QCA=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NO_BOOTMEM=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=4
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_ADDRESS_PCI=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_OF_RESERVED_MEM=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCI_DEBUG=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
|
||||
CONFIG_PHY_QCOM_IPQ806X_SATA=y
|
||||
# CONFIG_PHY_QCOM_QMP is not set
|
||||
# CONFIG_PHY_QCOM_QUSB2 is not set
|
||||
# CONFIG_PHY_QCOM_UFS is not set
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_APQ8064=y
|
||||
# CONFIG_PINCTRL_APQ8084 is not set
|
||||
# CONFIG_PINCTRL_IPQ4019 is not set
|
||||
CONFIG_PINCTRL_IPQ8064=y
|
||||
# CONFIG_PINCTRL_IPQ8074 is not set
|
||||
# CONFIG_PINCTRL_MDM9615 is not set
|
||||
CONFIG_PINCTRL_MSM=y
|
||||
# CONFIG_PINCTRL_MSM8660 is not set
|
||||
# CONFIG_PINCTRL_MSM8916 is not set
|
||||
# CONFIG_PINCTRL_MSM8960 is not set
|
||||
# CONFIG_PINCTRL_MSM8994 is not set
|
||||
# CONFIG_PINCTRL_MSM8996 is not set
|
||||
CONFIG_PINCTRL_MSM8X74=y
|
||||
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
|
||||
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
|
||||
# CONFIG_PL330_DMA is not set
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_POWER_RESET_BRCMKONA is not set
|
||||
CONFIG_POWER_RESET_MSM=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_QCOM_ADM=y
|
||||
CONFIG_QCOM_BAM_DMA=y
|
||||
CONFIG_QCOM_CLK_RPM=y
|
||||
# CONFIG_QCOM_EBI2 is not set
|
||||
CONFIG_QCOM_GDSC=y
|
||||
CONFIG_QCOM_GSBI=y
|
||||
CONFIG_QCOM_HFPLL=y
|
||||
# CONFIG_QCOM_IOMMU is not set
|
||||
CONFIG_QCOM_PM=y
|
||||
# CONFIG_QCOM_Q6V5_PIL is not set
|
||||
CONFIG_QCOM_QFPROM=y
|
||||
CONFIG_QCOM_RPMCC=y
|
||||
CONFIG_QCOM_SCM=y
|
||||
CONFIG_QCOM_SCM_32=y
|
||||
# CONFIG_QCOM_SMD is not set
|
||||
CONFIG_QCOM_SMEM=y
|
||||
# CONFIG_QCOM_SMP2P is not set
|
||||
# CONFIG_QCOM_SMSM is not set
|
||||
CONFIG_QCOM_TCSR=y
|
||||
CONFIG_QCOM_TSENS=y
|
||||
# CONFIG_QCOM_WCNSS_PIL is not set
|
||||
CONFIG_QCOM_WDT=y
|
||||
# CONFIG_QRTR is not set
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RCU_CPU_STALL_TIMEOUT=21
|
||||
CONFIG_RCU_STALL_COMMON=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_QCOM_RPM=y
|
||||
# CONFIG_REGULATOR_QCOM_SPMI is not set
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
# CONFIG_RPMSG_QCOM_SMD is not set
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_DRV_CMOS is not set
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
# CONFIG_SCHED_INFO is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
CONFIG_SERIAL_MSM=y
|
||||
CONFIG_SERIAL_MSM_CONSOLE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_ON_UP=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_CADENCE_QUADSPI is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_QUP=y
|
||||
CONFIG_SPMI=y
|
||||
CONFIG_SPMI_MSM_PMIC_ARB=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_STMMAC_PLATFORM=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SWCONFIG_LEDS=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_HWMON=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
# CONFIG_THUMB2_KERNEL is not set
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
CONFIG_UEVENT_HELPER_PATH=""
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_COMMON=y
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
# CONFIG_USB_QCOM_8X16_PHY is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_VDSO=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VFPv3=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
@ -0,0 +1,250 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064/AP148";
|
||||
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "ok";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 0>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,500 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TP-Link Archer C2600";
|
||||
compatible = "tplink,c2600", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &general;
|
||||
led-running = &power;
|
||||
led-upgrade = &general;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
|
||||
"gpio53", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pin: usb0_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pin: usb1_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi5: spi@1a280000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@60000 {
|
||||
label = "SBL3";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@90000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@a0000 {
|
||||
label = "SSD";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@b0000 {
|
||||
label = "TZ";
|
||||
reg = <0xb0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@e0000 {
|
||||
label = "RPM";
|
||||
reg = <0xe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fs-uboot@100000 {
|
||||
label = "fs-uboot";
|
||||
reg = <0x100000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
uboot-env@170000 {
|
||||
label = "uboot-env";
|
||||
reg = <0x170000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
radio@1b0000 {
|
||||
label = "radio";
|
||||
reg = <0x1b0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
os-image@1f0000 {
|
||||
label = "os-image";
|
||||
reg = <0x1f0000 0x200000>;
|
||||
};
|
||||
|
||||
rootfs@3f0000 {
|
||||
label = "rootfs";
|
||||
reg = <0x3f0000 0x1b00000>;
|
||||
};
|
||||
|
||||
defaultmac: default-mac@1ef0000 {
|
||||
label = "default-mac";
|
||||
reg = <0x1ef0000 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
pin@1ef0200 {
|
||||
label = "pin";
|
||||
reg = <0x1ef0200 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
product-info@1ef0400 {
|
||||
label = "product-info";
|
||||
reg = <0x1ef0400 0x0fc00>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition-table@1f00000 {
|
||||
label = "partition-table";
|
||||
reg = <0x1f00000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
soft-version@1f10000 {
|
||||
label = "soft-version";
|
||||
reg = <0x1f10000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
support-list@1f20000 {
|
||||
label = "support-list";
|
||||
reg = <0x1f20000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
profile@1f30000 {
|
||||
label = "profile";
|
||||
reg = <0x1f30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
default-config@1f40000 {
|
||||
label = "default-config";
|
||||
reg = <0x1f40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
user-config@1f50000 {
|
||||
label = "user-config";
|
||||
reg = <0x1f50000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
qos-db@1f90000 {
|
||||
label = "qos-db";
|
||||
reg = <0x1f90000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
usb-config@1fd0000 {
|
||||
label = "usb-config";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
log@1fe0000 {
|
||||
label = "log";
|
||||
reg = <0x1fe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&defaultmac 0x8>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&defaultmac 0x8>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
ledswitch {
|
||||
label = "ledswitch";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lan {
|
||||
label = "c2600:white:lan";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb4 {
|
||||
label = "c2600:white:usb_4";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "c2600:white:usb_2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "c2600:white:wps";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "c2600:amber:wan";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "c2600:white:wan";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "c2600:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
general: general {
|
||||
label = "c2600:white:general";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,419 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 D7800";
|
||||
compatible = "netgear,d7800", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0xe000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0200000>;
|
||||
};
|
||||
|
||||
ubi@1680000 {
|
||||
label = "ubi";
|
||||
reg = <0x1680000 0x1E00000>;
|
||||
};
|
||||
|
||||
netgear@3480000 {
|
||||
label = "netgear";
|
||||
reg = <0x3480000 0x4480000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@1480000 {
|
||||
label = "firmware";
|
||||
reg = <0x1480000 0x2000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy4>;
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&art 6>;
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&art 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "d7800:white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "d7800:white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "d7800:amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "d7800:white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "d7800:amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "d7800:white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "d7800:white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_white: power_white {
|
||||
label = "d7800:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "d7800:white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,236 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064/DB149";
|
||||
compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
alias {
|
||||
serial0 = &uart2;
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii0_pins: rgmii0_pins {
|
||||
mux {
|
||||
pins = "gpio2", "gpio66";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi2: gsbi@12480000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
uart2: serial@12490000 {
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "ok";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 0>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
m25p,fast-read;
|
||||
|
||||
partition@0 {
|
||||
label = "lowlevel_init";
|
||||
reg = <0x0 0x1b0000>;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "u-boot";
|
||||
reg = <0x1b0000 0x80000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x230000 0x40000>;
|
||||
};
|
||||
|
||||
partition@3 {
|
||||
label = "caldata";
|
||||
reg = <0x270000 0x40000>;
|
||||
};
|
||||
|
||||
partition@4 {
|
||||
label = "firmware";
|
||||
reg = <0x2b0000 0x1d50000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie2: pci@1b900000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
phy6: ethernet-phy@6 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
phy7: ethernet-phy@7 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac0: ethernet@37000000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <0>;
|
||||
phy-handle = <&phy4>;
|
||||
|
||||
pinctrl-0 = <&rgmii0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
phy-handle = <&phy6>;
|
||||
};
|
||||
|
||||
gmac3: ethernet@37600000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <3>;
|
||||
phy-handle = <&phy7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,406 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Linksys EA8500 WiFi Router";
|
||||
compatible = "linksys,ea8500", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyMSM0,115200n8";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio65", "gpio67", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio53", "gpio54";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie2: pci@1b900000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x0040000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@180000 {
|
||||
label = "SBL2";
|
||||
reg = <0x0180000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@2c0000 {
|
||||
label = "SBL3";
|
||||
reg = <0x02c0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@540000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x0540000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@660000 {
|
||||
label = "SSD";
|
||||
reg = <0x0660000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@780000 {
|
||||
label = "TZ";
|
||||
reg = <0x0780000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@a00000 {
|
||||
label = "RPM";
|
||||
reg = <0x0a00000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@c80000 {
|
||||
label = "art";
|
||||
reg = <0x0c80000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@dc0000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0dc0000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
u_env@ec0000 {
|
||||
label = "u_env";
|
||||
reg = <0x0ec0000 0x0040000>;
|
||||
};
|
||||
|
||||
s_env@f00000 {
|
||||
label = "s_env";
|
||||
reg = <0x0f00000 0x0040000>;
|
||||
};
|
||||
|
||||
devinfo@f40000 {
|
||||
label = "devinfo";
|
||||
reg = <0x0f40000 0x0040000>;
|
||||
};
|
||||
|
||||
linux@f80000 {
|
||||
label = "kernel1";
|
||||
reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
|
||||
};
|
||||
|
||||
rootfs@1280000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1280000 0x2500000>;
|
||||
};
|
||||
|
||||
linux2@3780000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3780000 0x2800000>;
|
||||
};
|
||||
|
||||
rootfs2@3a80000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3a80000 0x2500000>;
|
||||
};
|
||||
|
||||
syscfg@5f80000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5f80000 0x2080000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
//lan
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,emulation = <0>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
adm_dma: dma@18300000 {
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART >;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wps {
|
||||
label = "ea8500:green:wps";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "ea8500:white:power";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "ea8500:green:wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,394 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 R7500";
|
||||
compatible = "netgear,r7500", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0xe000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
clocks = <&gcc USB30_0_UTMI_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
clocks = <&gcc USB30_1_UTMI_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
clocks = <&gcc USB30_1_MASTER_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
clocks = <&gcc USB30_0_MASTER_CLK>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1340000 {
|
||||
label = "kernel";
|
||||
reg = <0x1340000 0x0200000>;
|
||||
};
|
||||
|
||||
ubi@1540000 {
|
||||
label = "ubi";
|
||||
reg = <0x1540000 0x1800000>;
|
||||
};
|
||||
|
||||
netgear@2d40000 {
|
||||
label = "netgear";
|
||||
reg = <0x2d40000 0x0c00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@3940000 {
|
||||
label = "reserve";
|
||||
reg = <0x3940000 0x46c0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@1340000 {
|
||||
label = "firmware";
|
||||
reg = <0x1340000 0x1a00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&art 6>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&art 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "r7500:white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "r7500:white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "r7500:amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "r7500:white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "r7500:amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "r7500:white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "r7500:white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_white: power_white {
|
||||
label = "r7500:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "r7500:white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
||||
compatible = "qcom,tcsr";
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,425 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4 R7500v2";
|
||||
compatible = "netgear,r7500v2", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs noinitrd";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0200000>;
|
||||
};
|
||||
|
||||
ubi@1680000 {
|
||||
label = "ubi";
|
||||
reg = <0x1680000 0x1E00000>;
|
||||
};
|
||||
|
||||
netgear@3480000 {
|
||||
label = "netgear";
|
||||
reg = <0x3480000 0x4480000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@1480000 {
|
||||
label = "firmware";
|
||||
reg = <0x1480000 0x2000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&art 6>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&art 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb1 {
|
||||
label = "r7500v2:amber:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "r7500v2:amber:usb3";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
status {
|
||||
label = "r7500v2:amber:status";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet {
|
||||
label = "r7500v2:white:internet";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "r7500v2:white:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "r7500v2:white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "r7500v2:white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "r7500v2:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "r7500v2:white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,424 @@
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TP-Link Archer VR2600v";
|
||||
compatible = "tplink,vr2600v", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &general;
|
||||
led-running = &power;
|
||||
led-upgrade = &general;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
|
||||
"gpio26", "gpio53", "gpio56", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash: W25Q128@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@80000 {
|
||||
label = "SBL3";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@100000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x100000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@110000 {
|
||||
label = "SSD";
|
||||
reg = <0x110000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@120000 {
|
||||
label = "TZ";
|
||||
reg = <0x120000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@1a0000 {
|
||||
label = "RPM";
|
||||
reg = <0x1a0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@220000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x220000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@2a0000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x2a0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
OLDART@2e0000 {
|
||||
label = "OLDART";
|
||||
reg = <0x2e0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@320000 {
|
||||
label = "kernel";
|
||||
reg = <0x320000 0x200000>;
|
||||
};
|
||||
|
||||
rootfs@520000 {
|
||||
label = "rootfs";
|
||||
reg = <0x520000 0xa60000>;
|
||||
};
|
||||
|
||||
defaultmac: default-mac@0xfaf100 {
|
||||
label = "default-mac";
|
||||
reg = <0xfaf100 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART@fc0000 {
|
||||
label = "ART";
|
||||
reg = <0xfc0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&defaultmac 0>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&defaultmac 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
dect {
|
||||
label = "dect";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_PHONE>;
|
||||
};
|
||||
|
||||
ledswitch {
|
||||
label = "ledswitch";
|
||||
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
dsl {
|
||||
label = "vr2600v:white:dsl";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "vr2600v:white:usb";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "vr2600v:white:lan";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "vr2600v:white:wlan2g";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "vr2600v:white:wlan5g";
|
||||
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "vr2600v:white:power";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
phone {
|
||||
label = "vr2600v:white:phone";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "vr2600v:white:wan";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
general: general {
|
||||
label = "vr2600v:white:general";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,570 @@
|
||||
/*
|
||||
* BSD LICENSE
|
||||
*
|
||||
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
|
||||
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the names of the copyright holders nor the names of any
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include "qcom-ipq8064-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
compatible = "compex,wpq864", "qcom,ipq8064";
|
||||
model = "Compex WPQ864";
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
serial0 = &gsbi4_serial;
|
||||
ethernet0 = &gmac1;
|
||||
ethernet1 = &gmac0;
|
||||
|
||||
led-boot = &led_pass;
|
||||
led-failsafe = &led_fail;
|
||||
led-running = &led_pass;
|
||||
led-upgrade = &led_pass;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&rpm_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mt29f2g08abbeah4@0 {
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0000000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x0040000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@180000 {
|
||||
label = "SBL2";
|
||||
reg = <0x0180000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@2c0000 {
|
||||
label = "SBL3";
|
||||
reg = <0x02c0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@540000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x0540000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@660000 {
|
||||
label = "SSD";
|
||||
reg = <0x0660000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@780000 {
|
||||
label = "TZ";
|
||||
reg = <0x0780000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@a00000 {
|
||||
label = "RPM";
|
||||
reg = <0x0a00000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
};
|
||||
|
||||
ART@1200000 {
|
||||
label = "ART";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
};
|
||||
|
||||
ubi@1340000 {
|
||||
label = "ubi";
|
||||
reg = <0x1340000 0x4000000>;
|
||||
};
|
||||
|
||||
BOOTCONFIG@1340000 {
|
||||
label = "BOOTCONFIG";
|
||||
reg = <0x5340000 0x0060000>;
|
||||
};
|
||||
|
||||
SBL2-1@53a0000- {
|
||||
label = "SBL2_1";
|
||||
reg = <0x53a0000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3-1@54e0000 {
|
||||
label = "SBL3_1";
|
||||
reg = <0x54e0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG-1@5760000 {
|
||||
label = "DDRCONFIG_1";
|
||||
reg = <0x5760000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD-1@5880000 {
|
||||
label = "SSD_1";
|
||||
reg = <0x5880000 0x0120000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ-1@59a0000 {
|
||||
label = "TZ_1";
|
||||
reg = <0x59a0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM-1@5c20000 {
|
||||
label = "RPM_1";
|
||||
reg = <0x5c20000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
BOOTCONFIG1@5ea0000 {
|
||||
label = "BOOTCONFIG1";
|
||||
reg = <0x5ea0000 0x0060000>;
|
||||
};
|
||||
|
||||
APPSBL-1@5f00000 {
|
||||
label = "APPSBL_1";
|
||||
reg = <0x5f00000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ubi-1@6400000 {
|
||||
label = "ubi_1";
|
||||
reg = <0x6400000 0x4000000>;
|
||||
};
|
||||
|
||||
unused@a400000 {
|
||||
label = "unused";
|
||||
reg = <0xa400000 0x5c00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
compatible = "virtual,mdio-gpio";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rss4 {
|
||||
label = "wpq864:green:rss4";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rss3 {
|
||||
label = "wpq864:green:rss3";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
rss2 {
|
||||
label = "wpq864:orange:rss2";
|
||||
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rss1 {
|
||||
label = "wpq864:red:rss1";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_pass: pass {
|
||||
label = "wpq864:green:pass";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_fail: fail {
|
||||
label = "wpq864:green:fail";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "wpq864:green:usb";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb-pcie {
|
||||
label = "wpq864:green:usb-pcie";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "gpio-beeper";
|
||||
|
||||
pinctrl-0 = <&beeper_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi4 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
};
|
||||
|
||||
&gsbi4_serial {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
status = "okay";
|
||||
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
|
||||
spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
s25fl256s1@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hs_phy_0 { /* USB3 port 0 HS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hs_phy_1 { /* USB3 port 1 HS phy */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ss_phy_0 { /* USB3 port 0 SS phy */
|
||||
status = "okay";
|
||||
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <160>;
|
||||
};
|
||||
|
||||
&ss_phy_1 { /* USB3 port 1 SS phy */
|
||||
status = "okay";
|
||||
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <160>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
|
||||
/delete-property/ pinctrl-0;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ perst-gpios;
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
state_default: pinctrl0 {
|
||||
pcie0_pcie2_perst {
|
||||
pins = "gpio3";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22",
|
||||
"gpio23", "gpio24", "gpio25", "gpio53";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio54";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
beeper_pins: beeper_pins {
|
||||
mux {
|
||||
pins = "gpio55";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
rpm_pins: rpm_pins {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0_pins {
|
||||
mux {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "gsbi4";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36", "gpio37",
|
||||
"gpio38", "gpio39", "gpio40", "gpio41",
|
||||
"gpio42", "gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42", "gpio43",
|
||||
"gpio44", "gpio45", "gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30",
|
||||
"gpio31", "gpio32", "gpio51", "gpio52",
|
||||
"gpio59", "gpio60", "gpio61", "gpio62";
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcsr {
|
||||
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
|
||||
};
|
||||
1333
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
Normal file
1333
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,393 @@
|
||||
#include "qcom-ipq8065-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "ZyXEL NBG6817";
|
||||
compatible = "zyxel,nbg6817", "qcom,ipq8065";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
sdcc1 = &sdcc1;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
append-rootblock = "root=/dev/mmcblk0p";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio53", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio9", "gpio26", "gpio33", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
drive-strength = <10>;
|
||||
bias-none;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
pins = "gpio17";
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "gpio16";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
pins = "gpio14";
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "gpio15";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <51200000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
pinctrl-names = "default";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
amba {
|
||||
sdcc1: sdcc@12400000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
internet {
|
||||
label = "nbg6817:white:internet";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power: power {
|
||||
label = "nbg6817:white:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wifi2g {
|
||||
label = "nbg6817:amber:wifi2g";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* wifi2g amber from the manual is missing */
|
||||
|
||||
wifi5g {
|
||||
label = "nbg6817:amber:wifi5g";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* wifi5g amber from the manual is missing */
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1,575 @@
|
||||
#include "qcom-ipq8065-v1.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4S R7800";
|
||||
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
rsvd@41200000 {
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi4_serial;
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinmux@800000 {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
mux {
|
||||
pins = "gpio34", "gpio35", "gpio36",
|
||||
"gpio37", "gpio38", "gpio39",
|
||||
"gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
function = "nand";
|
||||
drive-strength = <10>;
|
||||
bias-disable;
|
||||
};
|
||||
pullups {
|
||||
pins = "gpio39";
|
||||
bias-pull-up;
|
||||
};
|
||||
hold {
|
||||
pins = "gpio40", "gpio41", "gpio42",
|
||||
"gpio43", "gpio44", "gpio45",
|
||||
"gpio46", "gpio47";
|
||||
bias-bus-hold;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
mux {
|
||||
pins = "gpio0", "gpio1";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
mux {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||||
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||||
function = "rgmii2";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
spi6_pins: spi6_pins {
|
||||
mux {
|
||||
pins = "gpio55", "gpio56", "gpio58";
|
||||
function = "gsbi6";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
mosi {
|
||||
pins = "gpio55";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
miso {
|
||||
pins = "gpio56";
|
||||
drive-strength = <14>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio57";
|
||||
drive-strength = <12>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio58";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
reset {
|
||||
pins = "gpio33";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
status = "ok";
|
||||
serial@16340000 {
|
||||
status = "ok";
|
||||
};
|
||||
/*
|
||||
* The i2c device on gsbi4 should not be enabled.
|
||||
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||||
* RPM usage. Turning this on in kernel manifests as
|
||||
* i2c failure for the RPM.
|
||||
*/
|
||||
};
|
||||
|
||||
gsbi5: gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
|
||||
spi5: spi@1a280000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash: m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6: gsbi@16500000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "ok";
|
||||
spi6: spi@16580000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&spi6_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
spi-nor@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <6000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sata-phy@1b400000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
sata@29000000 {
|
||||
ports-implemented = <0x1>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8800 { /* USB3 port 1 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@100f8830 { /* USB3 port 1 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8800 { /* USB3 port 0 HS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@110f8830 { /* USB3 port 0 SS phy */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
usb30@0 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
pcie0: pci@1b500000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pcie1: pci@1b700000 {
|
||||
status = "ok";
|
||||
force_gen1 = <1>;
|
||||
};
|
||||
|
||||
nand@1ac00000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0200000>;
|
||||
};
|
||||
|
||||
ubi@1680000 {
|
||||
label = "ubi";
|
||||
reg = <0x1680000 0x1E00000>;
|
||||
};
|
||||
|
||||
netgear@3480000 {
|
||||
label = "netgear";
|
||||
reg = <0x3480000 0x4480000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@1480000 {
|
||||
label = "firmware";
|
||||
reg = <0x1480000 0x2000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
qca,ar8327-vlans = <
|
||||
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
|
||||
0x2 0x21 /* VLAN2 Ports 0/5 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@37200000 {
|
||||
status = "ok";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&art 6>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
gmac2: ethernet@37400000 {
|
||||
status = "ok";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
mtd-mac-address = <&art 0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_white: power_white {
|
||||
label = "r7800:white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "r7800:amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "r7800:white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "r7800:amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "r7800:white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "r7800:white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "r7800:white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "r7800:white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "r7800:white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "ok";
|
||||
};
|
||||
@ -0,0 +1 @@
|
||||
#include "qcom-ipq8065.dtsi"
|
||||
@ -0,0 +1,164 @@
|
||||
#include "qcom-ipq8064.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8065";
|
||||
compatible = "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
qcom,pvs {
|
||||
qcom,pvs-format-a;
|
||||
qcom,speed0-pvs0-bin-v0 =
|
||||
< 1725000000 1262500 >,
|
||||
< 1400000000 1175000 >,
|
||||
< 1000000000 1100000 >,
|
||||
< 800000000 1050000 >,
|
||||
< 600000000 1000000 >,
|
||||
< 384000000 975000 >;
|
||||
qcom,speed0-pvs1-bin-v0 =
|
||||
< 1725000000 1225000 >,
|
||||
< 1400000000 1150000 >,
|
||||
< 1000000000 1075000 >,
|
||||
< 800000000 1025000 >,
|
||||
< 600000000 975000 >,
|
||||
< 384000000 950000 >;
|
||||
qcom,speed0-pvs2-bin-v0 =
|
||||
< 1725000000 1200000 >,
|
||||
< 1400000000 1125000 >,
|
||||
< 1000000000 1050000 >,
|
||||
< 800000000 1000000 >,
|
||||
< 600000000 950000 >,
|
||||
< 384000000 925000 >;
|
||||
qcom,speed0-pvs3-bin-v0 =
|
||||
< 1725000000 1175000 >,
|
||||
< 1400000000 1100000 >,
|
||||
< 1000000000 1025000 >,
|
||||
< 800000000 975000 >,
|
||||
< 600000000 925000 >,
|
||||
< 384000000 900000 >;
|
||||
qcom,speed0-pvs4-bin-v0 =
|
||||
< 1725000000 1150000 >,
|
||||
< 1400000000 1075000 >,
|
||||
< 1000000000 1000000 >,
|
||||
< 800000000 950000 >,
|
||||
< 600000000 900000 >,
|
||||
< 384000000 875000 >;
|
||||
qcom,speed0-pvs5-bin-v0 =
|
||||
< 1725000000 1100000 >,
|
||||
< 1400000000 1025000 >,
|
||||
< 1000000000 950000 >,
|
||||
< 800000000 900000 >,
|
||||
< 600000000 850000 >,
|
||||
< 384000000 825000 >;
|
||||
qcom,speed0-pvs6-bin-v0 =
|
||||
< 1725000000 1050000 >,
|
||||
< 1400000000 975000 >,
|
||||
< 1000000000 900000 >,
|
||||
< 800000000 850000 >,
|
||||
< 600000000 800000 >,
|
||||
< 384000000 775000 >;
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
|
||||
rpm@108000 {
|
||||
|
||||
regulators {
|
||||
|
||||
smb208_s2a: s2a {
|
||||
regulator-min-microvolt = <775000>;
|
||||
regulator-max-microvolt = <1275000>;
|
||||
};
|
||||
|
||||
smb208_s2b: s2b {
|
||||
regulator-min-microvolt = <775000>;
|
||||
regulator-max-microvolt = <1275000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ss_phy_0: phy@110f8830 {
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <0xa0>;
|
||||
};
|
||||
ss_phy_1: phy@100f8830 {
|
||||
rx_eq = <2>;
|
||||
tx_deamp_3_5db = <32>;
|
||||
mpll = <0xa0>;
|
||||
};
|
||||
|
||||
/* Temporary fixed regulator */
|
||||
vsdcc_fixed: vsdcc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "SDCC Power";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sdcc1bam:dma@12402000 {
|
||||
compatible = "qcom,bam-v1.3.0";
|
||||
reg = <0x12402000 0x8000>;
|
||||
interrupts = <0 98 0>;
|
||||
clocks = <&gcc SDC1_H_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
sdcc3bam:dma@12182000 {
|
||||
compatible = "qcom,bam-v1.3.0";
|
||||
reg = <0x12182000 0x8000>;
|
||||
interrupts = <0 96 0>;
|
||||
clocks = <&gcc SDC3_H_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
amba {
|
||||
compatible = "arm,amba-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
sdcc1: sdcc@12400000 {
|
||||
status = "disabled";
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x00051180>;
|
||||
reg = <0x12400000 0x2000>;
|
||||
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cmd_irq";
|
||||
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
bus-width = <8>;
|
||||
max-frequency = <96000000>;
|
||||
non-removable;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
vmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
sdcc3: sdcc@12180000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x00051180>;
|
||||
status = "disabled";
|
||||
reg = <0x12180000 0x2000>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cmd_irq";
|
||||
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
bus-width = <8>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <192000000>;
|
||||
#mmc-ddr-1_8v;
|
||||
sd-uhs-sdr104;
|
||||
sd-uhs-ddr50;
|
||||
vqmmc-supply = <&vsdcc_fixed>;
|
||||
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,71 @@
|
||||
From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
|
||||
From: Thomas Pedersen <twp@codeaurora.org>
|
||||
Date: Mon, 16 May 2016 17:58:50 -0700
|
||||
Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
|
||||
|
||||
Original patch from Andy Gross.
|
||||
|
||||
This patch removes the crci information from the dma
|
||||
channel property. At least one client device requires
|
||||
using more than one CRCI value for a channel. This does
|
||||
not match the current binding and the crci information
|
||||
needs to be removed.
|
||||
|
||||
Instead, the client device will provide this information
|
||||
via other means.
|
||||
|
||||
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
||||
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
|
||||
---
|
||||
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
|
||||
1 file changed, 6 insertions(+), 10 deletions(-)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
|
||||
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
|
||||
@@ -4,8 +4,7 @@ Required properties:
|
||||
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
|
||||
- reg: Address range for DMA registers
|
||||
- interrupts: Should contain one interrupt shared by all channels
|
||||
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
|
||||
- denotes CRCI (client rate control interface) flow control assignment.
|
||||
+- #dma-cells: must be <1>. First cell denotes the channel number.
|
||||
- clocks: Should contain the core clock and interface clock.
|
||||
- clock-names: Must contain "core" for the core clock and "iface" for the
|
||||
interface clock.
|
||||
@@ -22,7 +21,7 @@ Example:
|
||||
compatible = "qcom,adm";
|
||||
reg = <0x18300000 0x100000>;
|
||||
interrupts = <0 170 0>;
|
||||
- #dma-cells = <2>;
|
||||
+ #dma-cells = <1>;
|
||||
|
||||
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
@@ -35,15 +34,12 @@ Example:
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
-DMA clients must use the format descripted in the dma.txt file, using a three
|
||||
+DMA clients must use the format descripted in the dma.txt file, using a two
|
||||
cell specifier for each channel.
|
||||
|
||||
-Each dmas request consists of 3 cells:
|
||||
+Each dmas request consists of two cells:
|
||||
1. phandle pointing to the DMA controller
|
||||
2. channel number
|
||||
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
|
||||
- The CRCI is used for flow control. It identifies the peripheral device that
|
||||
- is the source/destination for the transferred data.
|
||||
|
||||
Example:
|
||||
|
||||
@@ -55,7 +51,7 @@ Example:
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 0>;
|
||||
|
||||
- dmas = <&adm_dma 6 9>,
|
||||
- <&adm_dma 5 10>;
|
||||
+ dmas = <&adm_dma 6>,
|
||||
+ <&adm_dma 5>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
@ -0,0 +1,966 @@
|
||||
From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001
|
||||
From: Thomas Pedersen <twp@codeaurora.org>
|
||||
Date: Mon, 16 May 2016 17:58:51 -0700
|
||||
Subject: [PATCH 02/69] dmaengine: Add ADM driver
|
||||
|
||||
Original patch by Andy Gross.
|
||||
|
||||
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
|
||||
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
|
||||
|
||||
The ADM supports both memory to memory transactions and memory
|
||||
to/from peripheral device transactions. The controller also provides flow
|
||||
control capabilities for transactions to/from peripheral devices.
|
||||
|
||||
The initial release of this driver supports slave transfers to/from peripherals
|
||||
and also incorporates CRCI (client rate control interface) flow control.
|
||||
|
||||
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
||||
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
|
||||
---
|
||||
drivers/dma/qcom/Kconfig | 10 +
|
||||
drivers/dma/qcom/Makefile | 1 +
|
||||
drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 911 insertions(+)
|
||||
create mode 100644 drivers/dma/qcom/qcom_adm.c
|
||||
|
||||
--- a/drivers/dma/qcom/Kconfig
|
||||
+++ b/drivers/dma/qcom/Kconfig
|
||||
@@ -27,3 +27,13 @@ config QCOM_HIDMA
|
||||
(user to kernel, kernel to kernel, etc.). It only supports
|
||||
memcpy interface. The core is not intended for general
|
||||
purpose slave DMA.
|
||||
+
|
||||
+config QCOM_ADM
|
||||
+ tristate "Qualcomm ADM support"
|
||||
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
|
||||
+ select DMA_ENGINE
|
||||
+ select DMA_VIRTUAL_CHANNELS
|
||||
+ ---help---
|
||||
+ Enable support for the Qualcomm ADM DMA controller. This controller
|
||||
+ provides DMA capabilities for both general purpose and on-chip
|
||||
+ peripheral devices.
|
||||
--- a/drivers/dma/qcom/Makefile
|
||||
+++ b/drivers/dma/qcom/Makefile
|
||||
@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg
|
||||
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
|
||||
obj-$(CONFIG_QCOM_HIDMA) += hdma.o
|
||||
hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
|
||||
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/dma/qcom/qcom_adm.c
|
||||
@@ -0,0 +1,914 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/dma-mapping.h>
|
||||
+#include <linux/scatterlist.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_address.h>
|
||||
+#include <linux/of_irq.h>
|
||||
+#include <linux/of_dma.h>
|
||||
+#include <linux/reset.h>
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/dmaengine.h>
|
||||
+
|
||||
+#include "../dmaengine.h"
|
||||
+#include "../virt-dma.h"
|
||||
+
|
||||
+/* ADM registers - calculated from channel number and security domain */
|
||||
+#define ADM_CHAN_MULTI 0x4
|
||||
+#define ADM_CI_MULTI 0x4
|
||||
+#define ADM_CRCI_MULTI 0x4
|
||||
+#define ADM_EE_MULTI 0x800
|
||||
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
|
||||
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
|
||||
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
|
||||
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
|
||||
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
|
||||
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
|
||||
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
|
||||
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
|
||||
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
|
||||
+#define ADM_GP_CTL 0x3d8
|
||||
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
|
||||
+ ADM_EE_OFFS(ee))
|
||||
+
|
||||
+/* channel status */
|
||||
+#define ADM_CH_STATUS_VALID BIT(1)
|
||||
+
|
||||
+/* channel result */
|
||||
+#define ADM_CH_RSLT_VALID BIT(31)
|
||||
+#define ADM_CH_RSLT_ERR BIT(3)
|
||||
+#define ADM_CH_RSLT_FLUSH BIT(2)
|
||||
+#define ADM_CH_RSLT_TPD BIT(1)
|
||||
+
|
||||
+/* channel conf */
|
||||
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
|
||||
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
|
||||
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
|
||||
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
|
||||
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
|
||||
+
|
||||
+/* channel result conf */
|
||||
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
|
||||
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
|
||||
+
|
||||
+/* CRCI CTL */
|
||||
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
|
||||
+#define ADM_CRCI_CTL_RST BIT(17)
|
||||
+
|
||||
+/* CI configuration */
|
||||
+#define ADM_CI_RANGE_END(x) (x << 24)
|
||||
+#define ADM_CI_RANGE_START(x) (x << 16)
|
||||
+#define ADM_CI_BURST_4_WORDS BIT(2)
|
||||
+#define ADM_CI_BURST_8_WORDS BIT(3)
|
||||
+
|
||||
+/* GP CTL */
|
||||
+#define ADM_GP_CTL_LP_EN BIT(12)
|
||||
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
|
||||
+
|
||||
+/* Command pointer list entry */
|
||||
+#define ADM_CPLE_LP BIT(31)
|
||||
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
|
||||
+
|
||||
+/* Command list entry */
|
||||
+#define ADM_CMD_LC BIT(31)
|
||||
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
|
||||
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
|
||||
+
|
||||
+#define ADM_CMD_TYPE_SINGLE 0x0
|
||||
+#define ADM_CMD_TYPE_BOX 0x3
|
||||
+
|
||||
+#define ADM_CRCI_MUX_SEL BIT(4)
|
||||
+#define ADM_DESC_ALIGN 8
|
||||
+#define ADM_MAX_XFER (SZ_64K-1)
|
||||
+#define ADM_MAX_ROWS (SZ_64K-1)
|
||||
+#define ADM_MAX_CHANNELS 16
|
||||
+
|
||||
+struct adm_desc_hw_box {
|
||||
+ u32 cmd;
|
||||
+ u32 src_addr;
|
||||
+ u32 dst_addr;
|
||||
+ u32 row_len;
|
||||
+ u32 num_rows;
|
||||
+ u32 row_offset;
|
||||
+};
|
||||
+
|
||||
+struct adm_desc_hw_single {
|
||||
+ u32 cmd;
|
||||
+ u32 src_addr;
|
||||
+ u32 dst_addr;
|
||||
+ u32 len;
|
||||
+};
|
||||
+
|
||||
+struct adm_async_desc {
|
||||
+ struct virt_dma_desc vd;
|
||||
+ struct adm_device *adev;
|
||||
+
|
||||
+ size_t length;
|
||||
+ enum dma_transfer_direction dir;
|
||||
+ dma_addr_t dma_addr;
|
||||
+ size_t dma_len;
|
||||
+
|
||||
+ void *cpl;
|
||||
+ dma_addr_t cp_addr;
|
||||
+ u32 crci;
|
||||
+ u32 mux;
|
||||
+ u32 blk_size;
|
||||
+};
|
||||
+
|
||||
+struct adm_chan {
|
||||
+ struct virt_dma_chan vc;
|
||||
+ struct adm_device *adev;
|
||||
+
|
||||
+ /* parsed from DT */
|
||||
+ u32 id; /* channel id */
|
||||
+
|
||||
+ struct adm_async_desc *curr_txd;
|
||||
+ struct dma_slave_config slave;
|
||||
+ struct list_head node;
|
||||
+
|
||||
+ int error;
|
||||
+ int initialized;
|
||||
+};
|
||||
+
|
||||
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
|
||||
+{
|
||||
+ return container_of(common, struct adm_chan, vc.chan);
|
||||
+}
|
||||
+
|
||||
+struct adm_device {
|
||||
+ void __iomem *regs;
|
||||
+ struct device *dev;
|
||||
+ struct dma_device common;
|
||||
+ struct device_dma_parameters dma_parms;
|
||||
+ struct adm_chan *channels;
|
||||
+
|
||||
+ u32 ee;
|
||||
+
|
||||
+ struct clk *core_clk;
|
||||
+ struct clk *iface_clk;
|
||||
+
|
||||
+ struct reset_control *clk_reset;
|
||||
+ struct reset_control *c0_reset;
|
||||
+ struct reset_control *c1_reset;
|
||||
+ struct reset_control *c2_reset;
|
||||
+ int irq;
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
+ * adm_free_chan - Frees dma resources associated with the specific channel
|
||||
+ *
|
||||
+ * Free all allocated descriptors associated with this channel
|
||||
+ *
|
||||
+ */
|
||||
+static void adm_free_chan(struct dma_chan *chan)
|
||||
+{
|
||||
+ /* free all queued descriptors */
|
||||
+ vchan_free_chan_resources(to_virt_chan(chan));
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_get_blksize - Get block size from burst value
|
||||
+ *
|
||||
+ */
|
||||
+static int adm_get_blksize(unsigned int burst)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ switch (burst) {
|
||||
+ case 16:
|
||||
+ case 32:
|
||||
+ case 64:
|
||||
+ case 128:
|
||||
+ ret = ffs(burst>>4) - 1;
|
||||
+ break;
|
||||
+ case 192:
|
||||
+ ret = 4;
|
||||
+ break;
|
||||
+ case 256:
|
||||
+ ret = 5;
|
||||
+ break;
|
||||
+ default:
|
||||
+ ret = -EINVAL;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
|
||||
+ *
|
||||
+ * @achan: ADM channel
|
||||
+ * @desc: Descriptor memory pointer
|
||||
+ * @sg: Scatterlist entry
|
||||
+ * @crci: CRCI value
|
||||
+ * @burst: Burst size of transaction
|
||||
+ * @direction: DMA transfer direction
|
||||
+ */
|
||||
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
|
||||
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
|
||||
+ enum dma_transfer_direction direction)
|
||||
+{
|
||||
+ struct adm_desc_hw_box *box_desc = NULL;
|
||||
+ struct adm_desc_hw_single *single_desc;
|
||||
+ u32 remainder = sg_dma_len(sg);
|
||||
+ u32 rows, row_offset, crci_cmd;
|
||||
+ u32 mem_addr = sg_dma_address(sg);
|
||||
+ u32 *incr_addr = &mem_addr;
|
||||
+ u32 *src, *dst;
|
||||
+
|
||||
+ if (direction == DMA_DEV_TO_MEM) {
|
||||
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
|
||||
+ row_offset = burst;
|
||||
+ src = &achan->slave.src_addr;
|
||||
+ dst = &mem_addr;
|
||||
+ } else {
|
||||
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
|
||||
+ row_offset = burst << 16;
|
||||
+ src = &mem_addr;
|
||||
+ dst = &achan->slave.dst_addr;
|
||||
+ }
|
||||
+
|
||||
+ while (remainder >= burst) {
|
||||
+ box_desc = desc;
|
||||
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
|
||||
+ box_desc->row_offset = row_offset;
|
||||
+ box_desc->src_addr = *src;
|
||||
+ box_desc->dst_addr = *dst;
|
||||
+
|
||||
+ rows = remainder / burst;
|
||||
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
|
||||
+ box_desc->num_rows = rows << 16 | rows;
|
||||
+ box_desc->row_len = burst << 16 | burst;
|
||||
+
|
||||
+ *incr_addr += burst * rows;
|
||||
+ remainder -= burst * rows;
|
||||
+ desc += sizeof(*box_desc);
|
||||
+ }
|
||||
+
|
||||
+ /* if leftover bytes, do one single descriptor */
|
||||
+ if (remainder) {
|
||||
+ single_desc = desc;
|
||||
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
|
||||
+ single_desc->len = remainder;
|
||||
+ single_desc->src_addr = *src;
|
||||
+ single_desc->dst_addr = *dst;
|
||||
+ desc += sizeof(*single_desc);
|
||||
+
|
||||
+ if (sg_is_last(sg))
|
||||
+ single_desc->cmd |= ADM_CMD_LC;
|
||||
+ } else {
|
||||
+ if (box_desc && sg_is_last(sg))
|
||||
+ box_desc->cmd |= ADM_CMD_LC;
|
||||
+ }
|
||||
+
|
||||
+ return desc;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
|
||||
+ *
|
||||
+ * @achan: ADM channel
|
||||
+ * @desc: Descriptor memory pointer
|
||||
+ * @sg: Scatterlist entry
|
||||
+ * @direction: DMA transfer direction
|
||||
+ */
|
||||
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
|
||||
+ void *desc, struct scatterlist *sg,
|
||||
+ enum dma_transfer_direction direction)
|
||||
+{
|
||||
+ struct adm_desc_hw_single *single_desc;
|
||||
+ u32 remainder = sg_dma_len(sg);
|
||||
+ u32 mem_addr = sg_dma_address(sg);
|
||||
+ u32 *incr_addr = &mem_addr;
|
||||
+ u32 *src, *dst;
|
||||
+
|
||||
+ if (direction == DMA_DEV_TO_MEM) {
|
||||
+ src = &achan->slave.src_addr;
|
||||
+ dst = &mem_addr;
|
||||
+ } else {
|
||||
+ src = &mem_addr;
|
||||
+ dst = &achan->slave.dst_addr;
|
||||
+ }
|
||||
+
|
||||
+ do {
|
||||
+ single_desc = desc;
|
||||
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
|
||||
+ single_desc->src_addr = *src;
|
||||
+ single_desc->dst_addr = *dst;
|
||||
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
|
||||
+ ADM_MAX_XFER : remainder;
|
||||
+
|
||||
+ remainder -= single_desc->len;
|
||||
+ *incr_addr += single_desc->len;
|
||||
+ desc += sizeof(*single_desc);
|
||||
+ } while (remainder);
|
||||
+
|
||||
+ /* set last command if this is the end of the whole transaction */
|
||||
+ if (sg_is_last(sg))
|
||||
+ single_desc->cmd |= ADM_CMD_LC;
|
||||
+
|
||||
+ return desc;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_prep_slave_sg - Prep slave sg transaction
|
||||
+ *
|
||||
+ * @chan: dma channel
|
||||
+ * @sgl: scatter gather list
|
||||
+ * @sg_len: length of sg
|
||||
+ * @direction: DMA transfer direction
|
||||
+ * @flags: DMA flags
|
||||
+ * @context: transfer context (unused)
|
||||
+ */
|
||||
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
|
||||
+ struct scatterlist *sgl, unsigned int sg_len,
|
||||
+ enum dma_transfer_direction direction, unsigned long flags,
|
||||
+ void *context)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+ struct scatterlist *sg;
|
||||
+ dma_addr_t cple_addr;
|
||||
+ u32 i, burst;
|
||||
+ u32 single_count = 0, box_count = 0, crci = 0;
|
||||
+ void *desc;
|
||||
+ u32 *cple;
|
||||
+ int blk_size = 0;
|
||||
+
|
||||
+ if (!is_slave_direction(direction)) {
|
||||
+ dev_err(adev->dev, "invalid dma direction\n");
|
||||
+ return NULL;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * get burst value from slave configuration
|
||||
+ */
|
||||
+ burst = (direction == DMA_MEM_TO_DEV) ?
|
||||
+ achan->slave.dst_maxburst :
|
||||
+ achan->slave.src_maxburst;
|
||||
+
|
||||
+ /* if using flow control, validate burst and crci values */
|
||||
+ if (achan->slave.device_fc) {
|
||||
+
|
||||
+ blk_size = adm_get_blksize(burst);
|
||||
+ if (blk_size < 0) {
|
||||
+ dev_err(adev->dev, "invalid burst value: %d\n",
|
||||
+ burst);
|
||||
+ return ERR_PTR(-EINVAL);
|
||||
+ }
|
||||
+
|
||||
+ crci = achan->slave.slave_id & 0xf;
|
||||
+ if (!crci || achan->slave.slave_id > 0x1f) {
|
||||
+ dev_err(adev->dev, "invalid crci value\n");
|
||||
+ return ERR_PTR(-EINVAL);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ /* iterate through sgs and compute allocation size of structures */
|
||||
+ for_each_sg(sgl, sg, sg_len, i) {
|
||||
+ if (achan->slave.device_fc) {
|
||||
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
|
||||
+ ADM_MAX_ROWS);
|
||||
+ if (sg_dma_len(sg) % burst)
|
||||
+ single_count++;
|
||||
+ } else {
|
||||
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
|
||||
+ ADM_MAX_XFER);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);
|
||||
+ if (!async_desc)
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+
|
||||
+ if (crci)
|
||||
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
|
||||
+ ADM_CRCI_CTL_MUX_SEL : 0;
|
||||
+ async_desc->crci = crci;
|
||||
+ async_desc->blk_size = blk_size;
|
||||
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
|
||||
+ box_count * sizeof(struct adm_desc_hw_box) +
|
||||
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
|
||||
+
|
||||
+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC);
|
||||
+ if (!async_desc->cpl)
|
||||
+ goto free;
|
||||
+
|
||||
+ async_desc->adev = adev;
|
||||
+
|
||||
+ /* both command list entry and descriptors must be 8 byte aligned */
|
||||
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
|
||||
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
|
||||
+
|
||||
+ for_each_sg(sgl, sg, sg_len, i) {
|
||||
+ async_desc->length += sg_dma_len(sg);
|
||||
+
|
||||
+ if (achan->slave.device_fc)
|
||||
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
|
||||
+ burst, direction);
|
||||
+ else
|
||||
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
|
||||
+ direction);
|
||||
+ }
|
||||
+
|
||||
+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
|
||||
+ async_desc->dma_len,
|
||||
+ DMA_TO_DEVICE);
|
||||
+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
|
||||
+ goto free;
|
||||
+
|
||||
+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
|
||||
+
|
||||
+ /* init cmd list */
|
||||
+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
|
||||
+ DMA_TO_DEVICE);
|
||||
+ *cple = ADM_CPLE_LP;
|
||||
+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
|
||||
+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
|
||||
+ DMA_TO_DEVICE);
|
||||
+
|
||||
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
|
||||
+
|
||||
+free:
|
||||
+ kfree(async_desc);
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_terminate_all - terminate all transactions on a channel
|
||||
+ * @achan: adm dma channel
|
||||
+ *
|
||||
+ * Dequeues and frees all transactions, aborts current transaction
|
||||
+ * No callbacks are done
|
||||
+ *
|
||||
+ */
|
||||
+static int adm_terminate_all(struct dma_chan *chan)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ unsigned long flags;
|
||||
+ LIST_HEAD(head);
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+ vchan_get_all_descriptors(&achan->vc, &head);
|
||||
+
|
||||
+ /* send flush command to terminate current transaction */
|
||||
+ writel_relaxed(0x0,
|
||||
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+
|
||||
+ vchan_dma_desc_free_list(&achan->vc, &head);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ unsigned long flag;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flag);
|
||||
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_start_dma - start next transaction
|
||||
+ * @achan - ADM dma channel
|
||||
+ */
|
||||
+static void adm_start_dma(struct adm_chan *achan)
|
||||
+{
|
||||
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
|
||||
+ struct adm_device *adev = achan->adev;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+
|
||||
+ lockdep_assert_held(&achan->vc.lock);
|
||||
+
|
||||
+ if (!vd)
|
||||
+ return;
|
||||
+
|
||||
+ list_del(&vd->node);
|
||||
+
|
||||
+ /* write next command list out to the CMD FIFO */
|
||||
+ async_desc = container_of(vd, struct adm_async_desc, vd);
|
||||
+ achan->curr_txd = async_desc;
|
||||
+
|
||||
+ /* reset channel error */
|
||||
+ achan->error = 0;
|
||||
+
|
||||
+ if (!achan->initialized) {
|
||||
+ /* enable interrupts */
|
||||
+ writel(ADM_CH_CONF_SHADOW_EN |
|
||||
+ ADM_CH_CONF_PERM_MPU_CONF |
|
||||
+ ADM_CH_CONF_MPU_DISABLE |
|
||||
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
|
||||
+ adev->regs + ADM_CH_CONF(achan->id));
|
||||
+
|
||||
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
|
||||
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
|
||||
+
|
||||
+ achan->initialized = 1;
|
||||
+ }
|
||||
+
|
||||
+ /* set the crci block size if this transaction requires CRCI */
|
||||
+ if (async_desc->crci) {
|
||||
+ writel(async_desc->mux | async_desc->blk_size,
|
||||
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
|
||||
+ }
|
||||
+
|
||||
+ /* make sure IRQ enable doesn't get reordered */
|
||||
+ wmb();
|
||||
+
|
||||
+ /* write next command list out to the CMD FIFO */
|
||||
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
|
||||
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_dma_irq - irq handler for ADM controller
|
||||
+ * @irq: IRQ of interrupt
|
||||
+ * @data: callback data
|
||||
+ *
|
||||
+ * IRQ handler for the bam controller
|
||||
+ */
|
||||
+static irqreturn_t adm_dma_irq(int irq, void *data)
|
||||
+{
|
||||
+ struct adm_device *adev = data;
|
||||
+ u32 srcs, i;
|
||||
+ struct adm_async_desc *async_desc;
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ srcs = readl_relaxed(adev->regs +
|
||||
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
|
||||
+ struct adm_chan *achan = &adev->channels[i];
|
||||
+ u32 status, result;
|
||||
+
|
||||
+ if (srcs & BIT(i)) {
|
||||
+ status = readl_relaxed(adev->regs +
|
||||
+ ADM_CH_STATUS_SD(i, adev->ee));
|
||||
+
|
||||
+ /* if no result present, skip */
|
||||
+ if (!(status & ADM_CH_STATUS_VALID))
|
||||
+ continue;
|
||||
+
|
||||
+ result = readl_relaxed(adev->regs +
|
||||
+ ADM_CH_RSLT(i, adev->ee));
|
||||
+
|
||||
+ /* no valid results, skip */
|
||||
+ if (!(result & ADM_CH_RSLT_VALID))
|
||||
+ continue;
|
||||
+
|
||||
+ /* flag error if transaction was flushed or failed */
|
||||
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
|
||||
+ achan->error = 1;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+ async_desc = achan->curr_txd;
|
||||
+
|
||||
+ achan->curr_txd = NULL;
|
||||
+
|
||||
+ if (async_desc) {
|
||||
+ vchan_cookie_complete(&async_desc->vd);
|
||||
+
|
||||
+ /* kick off next DMA */
|
||||
+ adm_start_dma(achan);
|
||||
+ }
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_tx_status - returns status of transaction
|
||||
+ * @chan: dma channel
|
||||
+ * @cookie: transaction cookie
|
||||
+ * @txstate: DMA transaction state
|
||||
+ *
|
||||
+ * Return status of dma transaction
|
||||
+ */
|
||||
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
|
||||
+ struct dma_tx_state *txstate)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ struct virt_dma_desc *vd;
|
||||
+ enum dma_status ret;
|
||||
+ unsigned long flags;
|
||||
+ size_t residue = 0;
|
||||
+
|
||||
+ ret = dma_cookie_status(chan, cookie, txstate);
|
||||
+ if (ret == DMA_COMPLETE || !txstate)
|
||||
+ return ret;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+
|
||||
+ vd = vchan_find_desc(&achan->vc, cookie);
|
||||
+ if (vd)
|
||||
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
|
||||
+
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+
|
||||
+ /*
|
||||
+ * residue is either the full length if it is in the issued list, or 0
|
||||
+ * if it is in progress. We have no reliable way of determining
|
||||
+ * anything inbetween
|
||||
+ */
|
||||
+ dma_set_residue(txstate, residue);
|
||||
+
|
||||
+ if (achan->error)
|
||||
+ return DMA_ERROR;
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_issue_pending - starts pending transactions
|
||||
+ * @chan: dma channel
|
||||
+ *
|
||||
+ * Issues all pending transactions and starts DMA
|
||||
+ */
|
||||
+static void adm_issue_pending(struct dma_chan *chan)
|
||||
+{
|
||||
+ struct adm_chan *achan = to_adm_chan(chan);
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ spin_lock_irqsave(&achan->vc.lock, flags);
|
||||
+
|
||||
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
|
||||
+ adm_start_dma(achan);
|
||||
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * adm_dma_free_desc - free descriptor memory
|
||||
+ * @vd: virtual descriptor
|
||||
+ *
|
||||
+ */
|
||||
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
|
||||
+{
|
||||
+ struct adm_async_desc *async_desc = container_of(vd,
|
||||
+ struct adm_async_desc, vd);
|
||||
+
|
||||
+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
|
||||
+ async_desc->dma_len, DMA_TO_DEVICE);
|
||||
+ kfree(async_desc->cpl);
|
||||
+ kfree(async_desc);
|
||||
+}
|
||||
+
|
||||
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
|
||||
+ u32 index)
|
||||
+{
|
||||
+ achan->id = index;
|
||||
+ achan->adev = adev;
|
||||
+
|
||||
+ vchan_init(&achan->vc, &adev->common);
|
||||
+ achan->vc.desc_free = adm_dma_free_desc;
|
||||
+}
|
||||
+
|
||||
+static int adm_dma_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct adm_device *adev;
|
||||
+ struct resource *iores;
|
||||
+ int ret;
|
||||
+ u32 i;
|
||||
+
|
||||
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
|
||||
+ if (!adev)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ adev->dev = &pdev->dev;
|
||||
+
|
||||
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
|
||||
+ if (IS_ERR(adev->regs))
|
||||
+ return PTR_ERR(adev->regs);
|
||||
+
|
||||
+ adev->irq = platform_get_irq(pdev, 0);
|
||||
+ if (adev->irq < 0)
|
||||
+ return adev->irq;
|
||||
+
|
||||
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "Execution environment unspecified\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ adev->core_clk = devm_clk_get(adev->dev, "core");
|
||||
+ if (IS_ERR(adev->core_clk))
|
||||
+ return PTR_ERR(adev->core_clk);
|
||||
+
|
||||
+ ret = clk_prepare_enable(adev->core_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
|
||||
+ if (IS_ERR(adev->iface_clk)) {
|
||||
+ ret = PTR_ERR(adev->iface_clk);
|
||||
+ goto err_disable_core_clk;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(adev->iface_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
|
||||
+ goto err_disable_core_clk;
|
||||
+ }
|
||||
+
|
||||
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
|
||||
+ if (IS_ERR(adev->clk_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
|
||||
+ ret = PTR_ERR(adev->clk_reset);
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
|
||||
+ if (IS_ERR(adev->c0_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
|
||||
+ ret = PTR_ERR(adev->c0_reset);
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
|
||||
+ if (IS_ERR(adev->c1_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
|
||||
+ ret = PTR_ERR(adev->c1_reset);
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
|
||||
+ if (IS_ERR(adev->c2_reset)) {
|
||||
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
|
||||
+ ret = PTR_ERR(adev->c2_reset);
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ reset_control_assert(adev->clk_reset);
|
||||
+ reset_control_assert(adev->c0_reset);
|
||||
+ reset_control_assert(adev->c1_reset);
|
||||
+ reset_control_assert(adev->c2_reset);
|
||||
+
|
||||
+ reset_control_deassert(adev->clk_reset);
|
||||
+ reset_control_deassert(adev->c0_reset);
|
||||
+ reset_control_deassert(adev->c1_reset);
|
||||
+ reset_control_deassert(adev->c2_reset);
|
||||
+
|
||||
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
|
||||
+ sizeof(*adev->channels), GFP_KERNEL);
|
||||
+
|
||||
+ if (!adev->channels) {
|
||||
+ ret = -ENOMEM;
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ /* allocate and initialize channels */
|
||||
+ INIT_LIST_HEAD(&adev->common.channels);
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
|
||||
+ adm_channel_init(adev, &adev->channels[i], i);
|
||||
+
|
||||
+ /* reset CRCIs */
|
||||
+ for (i = 0; i < 16; i++)
|
||||
+ writel(ADM_CRCI_CTL_RST, adev->regs +
|
||||
+ ADM_CRCI_CTL(i, adev->ee));
|
||||
+
|
||||
+ /* configure client interfaces */
|
||||
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
|
||||
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
|
||||
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
|
||||
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
|
||||
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
|
||||
+ adev->regs + ADM_GP_CTL);
|
||||
+
|
||||
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
|
||||
+ 0, "adm_dma", adev);
|
||||
+ if (ret)
|
||||
+ goto err_disable_clks;
|
||||
+
|
||||
+ platform_set_drvdata(pdev, adev);
|
||||
+
|
||||
+ adev->common.dev = adev->dev;
|
||||
+ adev->common.dev->dma_parms = &adev->dma_parms;
|
||||
+
|
||||
+ /* set capabilities */
|
||||
+ dma_cap_zero(adev->common.cap_mask);
|
||||
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
|
||||
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
|
||||
+
|
||||
+ /* initialize dmaengine apis */
|
||||
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
|
||||
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
|
||||
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||||
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||||
+ adev->common.device_free_chan_resources = adm_free_chan;
|
||||
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
|
||||
+ adev->common.device_issue_pending = adm_issue_pending;
|
||||
+ adev->common.device_tx_status = adm_tx_status;
|
||||
+ adev->common.device_terminate_all = adm_terminate_all;
|
||||
+ adev->common.device_config = adm_slave_config;
|
||||
+
|
||||
+ ret = dma_async_device_register(&adev->common);
|
||||
+ if (ret) {
|
||||
+ dev_err(adev->dev, "failed to register dma async device\n");
|
||||
+ goto err_disable_clks;
|
||||
+ }
|
||||
+
|
||||
+ ret = of_dma_controller_register(pdev->dev.of_node,
|
||||
+ of_dma_xlate_by_chan_id,
|
||||
+ &adev->common);
|
||||
+ if (ret)
|
||||
+ goto err_unregister_dma;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_unregister_dma:
|
||||
+ dma_async_device_unregister(&adev->common);
|
||||
+err_disable_clks:
|
||||
+ clk_disable_unprepare(adev->iface_clk);
|
||||
+err_disable_core_clk:
|
||||
+ clk_disable_unprepare(adev->core_clk);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int adm_dma_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct adm_device *adev = platform_get_drvdata(pdev);
|
||||
+ struct adm_chan *achan;
|
||||
+ u32 i;
|
||||
+
|
||||
+ of_dma_controller_free(pdev->dev.of_node);
|
||||
+ dma_async_device_unregister(&adev->common);
|
||||
+
|
||||
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
|
||||
+ achan = &adev->channels[i];
|
||||
+
|
||||
+ /* mask IRQs for this channel/EE pair */
|
||||
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
|
||||
+
|
||||
+ adm_terminate_all(&adev->channels[i].vc.chan);
|
||||
+ }
|
||||
+
|
||||
+ devm_free_irq(adev->dev, adev->irq, adev);
|
||||
+
|
||||
+ clk_disable_unprepare(adev->core_clk);
|
||||
+ clk_disable_unprepare(adev->iface_clk);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id adm_of_match[] = {
|
||||
+ { .compatible = "qcom,adm", },
|
||||
+ {}
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, adm_of_match);
|
||||
+
|
||||
+static struct platform_driver adm_dma_driver = {
|
||||
+ .probe = adm_dma_probe,
|
||||
+ .remove = adm_dma_remove,
|
||||
+ .driver = {
|
||||
+ .name = "adm-dma-engine",
|
||||
+ .of_match_table = adm_of_match,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(adm_dma_driver);
|
||||
+
|
||||
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
||||
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
@ -0,0 +1,40 @@
|
||||
From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 08:16:10 +0100
|
||||
Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4
|
||||
|
||||
This patch was not annotated and comes from the v4.4 tree.
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
drivers/clk/qcom/gcc-ipq806x.c | 5 +++--
|
||||
1 file changed, 3 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/clk/qcom/gcc-ipq806x.c
|
||||
+++ b/drivers/clk/qcom/gcc-ipq806x.c
|
||||
@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
|
||||
.parent_names = gcc_pxo_pll8,
|
||||
.num_parents = 2,
|
||||
.ops = &clk_rcg_ops,
|
||||
- .flags = CLK_SET_PARENT_GATE,
|
||||
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
|
||||
},
|
||||
},
|
||||
};
|
||||
@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
|
||||
},
|
||||
.num_parents = 1,
|
||||
.ops = &clk_branch_ops,
|
||||
- .flags = CLK_SET_RATE_PARENT,
|
||||
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
|
||||
},
|
||||
},
|
||||
};
|
||||
@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
|
||||
.hw.init = &(struct clk_init_data){
|
||||
.name = "gsbi1_h_clk",
|
||||
.ops = &clk_branch_ops,
|
||||
+ .flags = CLK_IGNORE_UNUSED,
|
||||
},
|
||||
},
|
||||
};
|
||||
@ -0,0 +1,282 @@
|
||||
From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Thu, 9 Mar 2017 08:18:08 +0100
|
||||
Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms
|
||||
|
||||
On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
|
||||
used to store partition layout. This new parser can now be used to read
|
||||
SMEM and use it to register an MTD layout according to its content.
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
|
||||
---
|
||||
drivers/mtd/Kconfig | 7 ++
|
||||
drivers/mtd/Makefile | 1 +
|
||||
drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 236 insertions(+)
|
||||
create mode 100644 drivers/mtd/qcom_smem_part.c
|
||||
|
||||
--- a/drivers/mtd/Kconfig
|
||||
+++ b/drivers/mtd/Kconfig
|
||||
@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
|
||||
You will still need the parsing functions to be called by the driver
|
||||
for your particular device. It won't happen automatically.
|
||||
|
||||
+config MTD_QCOM_SMEM_PARTS
|
||||
+ tristate "QCOM SMEM partitioning support"
|
||||
+ depends on QCOM_SMEM
|
||||
+ help
|
||||
+ This provides partitions parser for QCOM devices using SMEM
|
||||
+ such as IPQ806x.
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
|
||||
#
|
||||
--- /dev/null
|
||||
+++ b/drivers/mtd/qcom_smem_part.c
|
||||
@@ -0,0 +1,235 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <linux/spi/spi.h>
|
||||
+#include <linux/module.h>
|
||||
+
|
||||
+#include <linux/soc/qcom/smem.h>
|
||||
+
|
||||
+/* Processor/host identifier for the application processor */
|
||||
+#define SMEM_HOST_APPS 0
|
||||
+
|
||||
+/* SMEM items index */
|
||||
+#define SMEM_AARM_PARTITION_TABLE 9
|
||||
+#define SMEM_BOOT_FLASH_TYPE 421
|
||||
+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
|
||||
+
|
||||
+/* SMEM Flash types */
|
||||
+#define SMEM_FLASH_NAND 2
|
||||
+#define SMEM_FLASH_SPI 6
|
||||
+
|
||||
+#define SMEM_PART_NAME_SZ 16
|
||||
+#define SMEM_PARTS_MAX 32
|
||||
+
|
||||
+struct smem_partition {
|
||||
+ char name[SMEM_PART_NAME_SZ];
|
||||
+ __le32 start;
|
||||
+ __le32 size;
|
||||
+ __le32 attr;
|
||||
+};
|
||||
+
|
||||
+struct smem_partition_table {
|
||||
+ u8 magic[8];
|
||||
+ __le32 version;
|
||||
+ __le32 len;
|
||||
+ struct smem_partition parts[SMEM_PARTS_MAX];
|
||||
+};
|
||||
+
|
||||
+/* SMEM Magic values in partition table */
|
||||
+static const u8 SMEM_PTABLE_MAGIC[] = {
|
||||
+ 0xaa, 0x73, 0xee, 0x55,
|
||||
+ 0xdb, 0xbd, 0x5e, 0xe3,
|
||||
+};
|
||||
+
|
||||
+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
|
||||
+{
|
||||
+ size_t size;
|
||||
+
|
||||
+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
|
||||
+ &size);
|
||||
+
|
||||
+ if (IS_ERR(*smem_blksz)) {
|
||||
+ pr_err("Unable to read flash blksz from SMEM\n");
|
||||
+ return -ENOENT;
|
||||
+ }
|
||||
+
|
||||
+ if (size != sizeof(**smem_blksz)) {
|
||||
+ pr_err("Invalid flash blksz size in SMEM\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
|
||||
+{
|
||||
+ size_t size;
|
||||
+
|
||||
+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
|
||||
+ &size);
|
||||
+
|
||||
+ if (IS_ERR(*smem_flash_type)) {
|
||||
+ pr_err("Unable to read flash type from SMEM\n");
|
||||
+ return -ENOENT;
|
||||
+ }
|
||||
+
|
||||
+ if (size != sizeof(**smem_flash_type)) {
|
||||
+ pr_err("Invalid flash type size in SMEM\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
|
||||
+{
|
||||
+ size_t size;
|
||||
+
|
||||
+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
|
||||
+ &size);
|
||||
+
|
||||
+ if (IS_ERR(*pparts)) {
|
||||
+ pr_err("Unable to read partition table from SMEM\n");
|
||||
+ return -ENOENT;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int of_dev_node_match(struct device *dev, void *data)
|
||||
+{
|
||||
+ return dev->of_node == data;
|
||||
+}
|
||||
+
|
||||
+static bool is_spi_device(struct device_node *np)
|
||||
+{
|
||||
+ struct device *dev;
|
||||
+
|
||||
+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
|
||||
+ if (!dev)
|
||||
+ return false;
|
||||
+
|
||||
+ put_device(dev);
|
||||
+ return true;
|
||||
+}
|
||||
+
|
||||
+static int parse_qcom_smem_partitions(struct mtd_info *master,
|
||||
+ const struct mtd_partition **pparts,
|
||||
+ struct mtd_part_parser_data *data)
|
||||
+{
|
||||
+ struct smem_partition_table *smem_parts;
|
||||
+ u64 *smem_flash_type, *smem_blksz;
|
||||
+ struct mtd_partition *mtd_parts;
|
||||
+ struct device_node *of_node = master->dev.of_node;
|
||||
+ int i, ret;
|
||||
+
|
||||
+ /*
|
||||
+ * SMEM will only store the partition table of the boot device.
|
||||
+ * If this is not the boot device, do not return any partition.
|
||||
+ */
|
||||
+ ret = qcom_smem_get_flash_type(&smem_flash_type);
|
||||
+ if (ret < 0)
|
||||
+ return ret;
|
||||
+
|
||||
+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
|
||||
+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
|
||||
+ return 0;
|
||||
+
|
||||
+ /*
|
||||
+ * Just for sanity purpose, make sure the block size in SMEM matches the
|
||||
+ * block size of the MTD device
|
||||
+ */
|
||||
+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
|
||||
+ if (ret < 0)
|
||||
+ return ret;
|
||||
+
|
||||
+ if (*smem_blksz != master->erasesize) {
|
||||
+ pr_err("SMEM block size differs from MTD block size\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ /* Get partition pointer from SMEM */
|
||||
+ ret = qcom_smem_get_flash_partitions(&smem_parts);
|
||||
+ if (ret < 0)
|
||||
+ return ret;
|
||||
+
|
||||
+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
|
||||
+ sizeof(SMEM_PTABLE_MAGIC))) {
|
||||
+ pr_err("SMEM partition magic invalid\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ /* Allocate and populate the mtd structures */
|
||||
+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
|
||||
+ GFP_KERNEL);
|
||||
+ if (!mtd_parts)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ for (i = 0; i < smem_parts->len; i++) {
|
||||
+ struct smem_partition *s_part = &smem_parts->parts[i];
|
||||
+ struct mtd_partition *m_part = &mtd_parts[i];
|
||||
+
|
||||
+ m_part->name = s_part->name;
|
||||
+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
|
||||
+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
|
||||
+
|
||||
+ /*
|
||||
+ * The last SMEM partition may have its size marked as
|
||||
+ * something like 0xffffffff, which means "until the end of the
|
||||
+ * flash device". In this case, truncate it.
|
||||
+ */
|
||||
+ if (m_part->offset + m_part->size > master->size)
|
||||
+ m_part->size = master->size - m_part->offset;
|
||||
+ }
|
||||
+
|
||||
+ *pparts = mtd_parts;
|
||||
+
|
||||
+ return smem_parts->len;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id qcom_smem_of_match_table[] = {
|
||||
+ { .compatible = "qcom,smem" },
|
||||
+ {},
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table);
|
||||
+
|
||||
+static struct mtd_part_parser qcom_smem_parser = {
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .parse_fn = parse_qcom_smem_partitions,
|
||||
+ .name = "qcom-smem",
|
||||
+ .of_match_table = qcom_smem_of_match_table,
|
||||
+};
|
||||
+
|
||||
+static int __init qcom_smem_parser_init(void)
|
||||
+{
|
||||
+ register_mtd_parser(&qcom_smem_parser);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void __exit qcom_smem_parser_exit(void)
|
||||
+{
|
||||
+ deregister_mtd_parser(&qcom_smem_parser);
|
||||
+}
|
||||
+
|
||||
+module_init(qcom_smem_parser_init);
|
||||
+module_exit(qcom_smem_parser_exit);
|
||||
+
|
||||
+MODULE_LICENSE("GPL");
|
||||
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
|
||||
+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
|
||||
--- a/drivers/mtd/Makefile
|
||||
+++ b/drivers/mtd/Makefile
|
||||
@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
|
||||
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
|
||||
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
|
||||
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
|
||||
obj-y += parsers/
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
@ -0,0 +1,616 @@
|
||||
From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
|
||||
From: Andy Gross <agross@codeaurora.org>
|
||||
Date: Thu, 9 Mar 2017 08:19:18 +0100
|
||||
Subject: [PATCH 32/69] phy: add qcom dwc3 phy
|
||||
|
||||
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
||||
---
|
||||
drivers/phy/Kconfig | 12 +
|
||||
drivers/phy/Makefile | 1 +
|
||||
drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 588 insertions(+)
|
||||
create mode 100644 drivers/phy/phy-qcom-dwc3.c
|
||||
|
||||
--- a/drivers/phy/qualcomm/Kconfig
|
||||
+++ b/drivers/phy/qualcomm/Kconfig
|
||||
@@ -56,3 +56,15 @@
|
||||
select GENERIC_PHY
|
||||
help
|
||||
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
|
||||
+
|
||||
+config PHY_QCOM_DWC3
|
||||
+ tristate "QCOM DWC3 USB PHY support"
|
||||
+ depends on ARCH_QCOM
|
||||
+ depends on HAS_IOMEM
|
||||
+ depends on OF
|
||||
+ select GENERIC_PHY
|
||||
+ help
|
||||
+ This option enables support for the Synopsis PHYs present inside the
|
||||
+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
|
||||
+ PHY controllers.
|
||||
+
|
||||
--- a/drivers/phy/qualcomm/Makefile
|
||||
+++ b/drivers/phy/qualcomm/Makefile
|
||||
@@ -8,3 +8,4 @@
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
|
||||
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
|
||||
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
|
||||
+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
|
||||
@@ -0,0 +1,575 @@
|
||||
+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+* This program is distributed in the hope that it will be useful,
|
||||
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+* GNU General Public License for more details.
|
||||
+*/
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/phy/phy.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/delay.h>
|
||||
+
|
||||
+/**
|
||||
+ * USB QSCRATCH Hardware registers
|
||||
+ */
|
||||
+#define QSCRATCH_GENERAL_CFG (0x08)
|
||||
+#define HSUSB_PHY_CTRL_REG (0x10)
|
||||
+
|
||||
+/* PHY_CTRL_REG */
|
||||
+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
|
||||
+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
|
||||
+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
|
||||
+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
|
||||
+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
|
||||
+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
|
||||
+#define HSUSB_CTRL_COMMONONN BIT(11)
|
||||
+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
|
||||
+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
|
||||
+#define HSUSB_CTRL_CLAMP_EN BIT(7)
|
||||
+#define HSUSB_CTRL_RETENABLEN BIT(1)
|
||||
+#define HSUSB_CTRL_POR BIT(0)
|
||||
+
|
||||
+/* QSCRATCH_GENERAL_CFG */
|
||||
+#define HSUSB_GCFG_XHCI_REV BIT(2)
|
||||
+
|
||||
+/**
|
||||
+ * USB QSCRATCH Hardware registers
|
||||
+ */
|
||||
+#define SSUSB_PHY_CTRL_REG (0x00)
|
||||
+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
|
||||
+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
|
||||
+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
|
||||
+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
|
||||
+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
|
||||
+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
|
||||
+#define CR_PROTOCOL_READ_REG (0x1c)
|
||||
+#define CR_PROTOCOL_WRITE_REG (0x20)
|
||||
+
|
||||
+/* PHY_CTRL_REG */
|
||||
+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
|
||||
+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
|
||||
+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
|
||||
+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
|
||||
+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
|
||||
+
|
||||
+/* SSPHY control registers */
|
||||
+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
|
||||
+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
|
||||
+
|
||||
+/* SSPHY SoC version specific values */
|
||||
+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
|
||||
+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit
|
||||
+ preemphasis */
|
||||
+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */
|
||||
+
|
||||
+/* QSCRATCH PHY_PARAM_CTRL1 fields */
|
||||
+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u
|
||||
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u
|
||||
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u
|
||||
+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u
|
||||
+
|
||||
+#define PHY_PARAM_CTRL1_MASK \
|
||||
+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
|
||||
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
|
||||
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
|
||||
+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
|
||||
+
|
||||
+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
|
||||
+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
|
||||
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
|
||||
+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
|
||||
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
|
||||
+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
|
||||
+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
|
||||
+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
|
||||
+
|
||||
+/* RX OVRD IN HI bits */
|
||||
+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
|
||||
+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
|
||||
+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
|
||||
+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
|
||||
+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
|
||||
+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
|
||||
+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
|
||||
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
|
||||
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
|
||||
+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
|
||||
+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
|
||||
+
|
||||
+/* TX OVRD DRV LO register bits */
|
||||
+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
|
||||
+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
|
||||
+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
|
||||
+#define TX_OVRD_DRV_LO_EN BIT(14)
|
||||
+
|
||||
+/* SS CAP register bits */
|
||||
+#define SS_CR_CAP_ADDR_REG BIT(0)
|
||||
+#define SS_CR_CAP_DATA_REG BIT(0)
|
||||
+#define SS_CR_READ_REG BIT(0)
|
||||
+#define SS_CR_WRITE_REG BIT(0)
|
||||
+
|
||||
+struct qcom_dwc3_usb_phy {
|
||||
+ void __iomem *base;
|
||||
+ struct device *dev;
|
||||
+ struct clk *xo_clk;
|
||||
+ struct clk *ref_clk;
|
||||
+ u32 rx_eq;
|
||||
+ u32 tx_deamp_3_5db;
|
||||
+ u32 mpll;
|
||||
+};
|
||||
+
|
||||
+struct qcom_dwc3_phy_drvdata {
|
||||
+ struct phy_ops ops;
|
||||
+ u32 clk_rate;
|
||||
+};
|
||||
+
|
||||
+/**
|
||||
+ * Write register and read back masked value to confirm it is written
|
||||
+ *
|
||||
+ * @base - QCOM DWC3 PHY base virtual address.
|
||||
+ * @offset - register offset.
|
||||
+ * @mask - register bitmask specifying what should be updated
|
||||
+ * @val - value to write.
|
||||
+ */
|
||||
+static inline void qcom_dwc3_phy_write_readback(
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
|
||||
+ const u32 mask, u32 val)
|
||||
+{
|
||||
+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
|
||||
+
|
||||
+ tmp &= ~mask; /* retain other bits */
|
||||
+ write_val = tmp | val;
|
||||
+
|
||||
+ writel(write_val, phy_dwc3->base + offset);
|
||||
+
|
||||
+ /* Read back to see if val was written */
|
||||
+ tmp = readl(phy_dwc3->base + offset);
|
||||
+ tmp &= mask; /* clear other bits */
|
||||
+
|
||||
+ if (tmp != val)
|
||||
+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
|
||||
+ val, offset);
|
||||
+}
|
||||
+
|
||||
+static int wait_for_latch(void __iomem *addr)
|
||||
+{
|
||||
+ u32 retry = 10;
|
||||
+
|
||||
+ while (true) {
|
||||
+ if (!readl(addr))
|
||||
+ break;
|
||||
+
|
||||
+ if (--retry == 0)
|
||||
+ return -ETIMEDOUT;
|
||||
+
|
||||
+ usleep_range(10, 20);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * Write SSPHY register
|
||||
+ *
|
||||
+ * @base - QCOM DWC3 PHY base virtual address.
|
||||
+ * @addr - SSPHY address to write.
|
||||
+ * @val - value to write.
|
||||
+ */
|
||||
+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
|
||||
+ u32 addr, u32 val)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
|
||||
+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
|
||||
+ if (ret)
|
||||
+ goto err_wait;
|
||||
+
|
||||
+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
|
||||
+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
|
||||
+ if (ret)
|
||||
+ goto err_wait;
|
||||
+
|
||||
+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
|
||||
+
|
||||
+err_wait:
|
||||
+ if (ret)
|
||||
+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * Read SSPHY register.
|
||||
+ *
|
||||
+ * @base - QCOM DWC3 PHY base virtual address.
|
||||
+ * @addr - SSPHY address to read.
|
||||
+ */
|
||||
+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
|
||||
+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
|
||||
+ if (ret)
|
||||
+ goto err_wait;
|
||||
+
|
||||
+ /*
|
||||
+ * Due to hardware bug, first read of SSPHY register might be
|
||||
+ * incorrect. Hence as workaround, SW should perform SSPHY register
|
||||
+ * read twice, but use only second read and ignore first read.
|
||||
+ */
|
||||
+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
|
||||
+ if (ret)
|
||||
+ goto err_wait;
|
||||
+
|
||||
+ /* throwaway read */
|
||||
+ readl(base + CR_PROTOCOL_DATA_OUT_REG);
|
||||
+
|
||||
+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
|
||||
+
|
||||
+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
|
||||
+ if (ret)
|
||||
+ goto err_wait;
|
||||
+
|
||||
+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
|
||||
+
|
||||
+err_wait:
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_dwc3_hs_phy_init(struct phy *phy)
|
||||
+{
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
||||
+ int ret;
|
||||
+ u32 val;
|
||||
+
|
||||
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
|
||||
+ if (ret) {
|
||||
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
|
||||
+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
|
||||
+ */
|
||||
+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
|
||||
+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
|
||||
+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
|
||||
+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
|
||||
+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
|
||||
+
|
||||
+ /* use core clock if external reference is not present */
|
||||
+ if (!phy_dwc3->xo_clk)
|
||||
+ val |= HSUSB_CTRL_USE_CLKCORE;
|
||||
+
|
||||
+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
|
||||
+ usleep_range(2000, 2200);
|
||||
+
|
||||
+ /* Disable (bypass) VBUS and ID filters */
|
||||
+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
|
||||
+{
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
||||
+
|
||||
+ clk_disable_unprepare(phy_dwc3->ref_clk);
|
||||
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_dwc3_ss_phy_init(struct phy *phy)
|
||||
+{
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
||||
+ int ret;
|
||||
+ u32 data = 0;
|
||||
+
|
||||
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
|
||||
+ if (ret) {
|
||||
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ /* reset phy */
|
||||
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
||||
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
|
||||
+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
||||
+ usleep_range(2000, 2200);
|
||||
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
||||
+
|
||||
+ /* clear REF_PAD if we don't have XO clk */
|
||||
+ if (!phy_dwc3->xo_clk)
|
||||
+ data &= ~SSUSB_CTRL_REF_USE_PAD;
|
||||
+ else
|
||||
+ data |= SSUSB_CTRL_REF_USE_PAD;
|
||||
+
|
||||
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
||||
+
|
||||
+ /* wait for ref clk to become stable, this can take up to 30ms */
|
||||
+ msleep(30);
|
||||
+
|
||||
+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
|
||||
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
|
||||
+
|
||||
+ /*
|
||||
+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
|
||||
+ * in HS mode instead of SS mode. Workaround it by asserting
|
||||
+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
|
||||
+ */
|
||||
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ data |= (1 << 7);
|
||||
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ data &= ~0xff0;
|
||||
+ data |= 0x20;
|
||||
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ /*
|
||||
+ * Fix RX Equalization setting as follows
|
||||
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
|
||||
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
|
||||
+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
|
||||
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
|
||||
+ */
|
||||
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
|
||||
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
|
||||
+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
|
||||
+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
|
||||
+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
|
||||
+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
|
||||
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
|
||||
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ /*
|
||||
+ * Set EQ and TX launch amplitudes as follows
|
||||
+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
|
||||
+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
|
||||
+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
|
||||
+ */
|
||||
+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
|
||||
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
|
||||
+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
|
||||
+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
|
||||
+ data |= 0x6E;
|
||||
+ data |= TX_OVRD_DRV_LO_EN;
|
||||
+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
|
||||
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
|
||||
+ if (ret)
|
||||
+ goto err_phy_trans;
|
||||
+
|
||||
+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
|
||||
+
|
||||
+ /*
|
||||
+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
|
||||
+ * TX_FULL_SWING [26:20] amplitude to 110
|
||||
+ * TX_DEEMPH_6DB [19:14] to 32
|
||||
+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
|
||||
+ * LOS_BIAS [7:3] to 9
|
||||
+ */
|
||||
+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
|
||||
+
|
||||
+ data &= ~PHY_PARAM_CTRL1_MASK;
|
||||
+
|
||||
+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
|
||||
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
|
||||
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
|
||||
+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
|
||||
+
|
||||
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
|
||||
+ PHY_PARAM_CTRL1_MASK, data);
|
||||
+
|
||||
+err_phy_trans:
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
|
||||
+{
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
|
||||
+
|
||||
+ /* Sequence to put SSPHY in low power state:
|
||||
+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
|
||||
+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
|
||||
+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
|
||||
+ */
|
||||
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
||||
+ SSUSB_CTRL_SS_PHY_EN, 0x0);
|
||||
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
||||
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
|
||||
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
|
||||
+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
|
||||
+
|
||||
+ clk_disable_unprepare(phy_dwc3->ref_clk);
|
||||
+ clk_disable_unprepare(phy_dwc3->xo_clk);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
|
||||
+ .ops = {
|
||||
+ .init = qcom_dwc3_hs_phy_init,
|
||||
+ .exit = qcom_dwc3_hs_phy_exit,
|
||||
+ .owner = THIS_MODULE,
|
||||
+ },
|
||||
+ .clk_rate = 60000000,
|
||||
+};
|
||||
+
|
||||
+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
|
||||
+ .ops = {
|
||||
+ .init = qcom_dwc3_ss_phy_init,
|
||||
+ .exit = qcom_dwc3_ss_phy_exit,
|
||||
+ .owner = THIS_MODULE,
|
||||
+ },
|
||||
+ .clk_rate = 125000000,
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id qcom_dwc3_phy_table[] = {
|
||||
+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
|
||||
+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
|
||||
+ { /* Sentinel */ }
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
|
||||
+
|
||||
+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct qcom_dwc3_usb_phy *phy_dwc3;
|
||||
+ struct phy_provider *phy_provider;
|
||||
+ struct phy *generic_phy;
|
||||
+ struct resource *res;
|
||||
+ const struct of_device_id *match;
|
||||
+ const struct qcom_dwc3_phy_drvdata *data;
|
||||
+ struct device_node *np;
|
||||
+
|
||||
+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
|
||||
+ if (!phy_dwc3)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
|
||||
+ data = match->data;
|
||||
+
|
||||
+ phy_dwc3->dev = &pdev->dev;
|
||||
+
|
||||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
|
||||
+ if (IS_ERR(phy_dwc3->base))
|
||||
+ return PTR_ERR(phy_dwc3->base);
|
||||
+
|
||||
+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
|
||||
+ if (IS_ERR(phy_dwc3->ref_clk)) {
|
||||
+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
|
||||
+ return PTR_ERR(phy_dwc3->ref_clk);
|
||||
+ }
|
||||
+
|
||||
+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
|
||||
+
|
||||
+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
|
||||
+ if (IS_ERR(phy_dwc3->xo_clk)) {
|
||||
+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
|
||||
+ phy_dwc3->xo_clk = NULL;
|
||||
+ }
|
||||
+
|
||||
+ /* Parse device node to probe HSIO settings */
|
||||
+ np = of_node_get(pdev->dev.of_node);
|
||||
+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
|
||||
+ strlen(match->compatible))) {
|
||||
+
|
||||
+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
|
||||
+ of_property_read_u32(np, "tx_deamp_3_5db",
|
||||
+ &phy_dwc3->tx_deamp_3_5db) ||
|
||||
+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
|
||||
+
|
||||
+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
|
||||
+
|
||||
+ /* Default HSIO settings */
|
||||
+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
|
||||
+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
|
||||
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
|
||||
+ &data->ops);
|
||||
+
|
||||
+ if (IS_ERR(generic_phy))
|
||||
+ return PTR_ERR(generic_phy);
|
||||
+
|
||||
+ phy_set_drvdata(generic_phy, phy_dwc3);
|
||||
+ platform_set_drvdata(pdev, phy_dwc3);
|
||||
+
|
||||
+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
|
||||
+ of_phy_simple_xlate);
|
||||
+
|
||||
+ if (IS_ERR(phy_provider))
|
||||
+ return PTR_ERR(phy_provider);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver qcom_dwc3_phy_driver = {
|
||||
+ .probe = qcom_dwc3_phy_probe,
|
||||
+ .driver = {
|
||||
+ .name = "qcom-dwc3-usb-phy",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = qcom_dwc3_phy_table,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(qcom_dwc3_phy_driver);
|
||||
+
|
||||
+MODULE_ALIAS("platform:phy-qcom-dwc3");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
||||
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
|
||||
+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
|
||||
@ -0,0 +1,28 @@
|
||||
From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Tue, 21 Apr 2015 19:09:07 -0700
|
||||
Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is
|
||||
enabled
|
||||
|
||||
If multiple PCIe devices are present in the system, the kernel will
|
||||
panic at boot time when trying to scan the PCI buses. This happens on
|
||||
IPQ806x based platforms, which has 3 PCIe ports.
|
||||
|
||||
Enabling this option allows the kernel to assign the pci-domains
|
||||
according to the device-tree content. This allows multiple PCIe
|
||||
controllers to coexist in the system.
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/mach-qcom/Kconfig | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/arch/arm/mach-qcom/Kconfig
|
||||
+++ b/arch/arm/mach-qcom/Kconfig
|
||||
@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
|
||||
select ARM_AMBA
|
||||
select PINCTRL
|
||||
select QCOM_SCM if SMP
|
||||
+ select PCI_DOMAINS if PCI
|
||||
help
|
||||
Support for Qualcomm's devicetree based systems.
|
||||
@ -0,0 +1,147 @@
|
||||
From patchwork Fri Dec 8 09:42:19 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,01/12] ARM: Add Krait L2 register accessor functions
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102101
|
||||
Message-Id: <1512726150-7204-2-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org, Mark Rutland <mark.rutland@arm.com>,
|
||||
Russell King <linux@arm.linux.org.uk>,
|
||||
Courtney Cavin <courtney.cavin@sonymobile.com>
|
||||
Date: Fri, 8 Dec 2017 15:12:19 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
Krait CPUs have a handful of L2 cache controller registers that
|
||||
live behind a cp15 based indirection register. First you program
|
||||
the indirection register (l2cpselr) to point the L2 'window'
|
||||
register (l2cpdr) at what you want to read/write. Then you
|
||||
read/write the 'window' register to do what you want. The
|
||||
l2cpselr register is not banked per-cpu so we must lock around
|
||||
accesses to it to prevent other CPUs from re-pointing l2cpdr
|
||||
underneath us.
|
||||
|
||||
Cc: Mark Rutland <mark.rutland@arm.com>
|
||||
Cc: Russell King <linux@arm.linux.org.uk>
|
||||
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
arch/arm/common/Kconfig | 3 ++
|
||||
arch/arm/common/Makefile | 1 +
|
||||
arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++
|
||||
arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
|
||||
4 files changed, 82 insertions(+)
|
||||
create mode 100644 arch/arm/common/krait-l2-accessors.c
|
||||
create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
|
||||
|
||||
--- a/arch/arm/common/Kconfig
|
||||
+++ b/arch/arm/common/Kconfig
|
||||
@@ -7,6 +7,9 @@ config DMABOUNCE
|
||||
bool
|
||||
select ZONE_DMA
|
||||
|
||||
+config KRAIT_L2_ACCESSORS
|
||||
+ bool
|
||||
+
|
||||
config SHARP_LOCOMO
|
||||
bool
|
||||
|
||||
--- a/arch/arm/common/Makefile
|
||||
+++ b/arch/arm/common/Makefile
|
||||
@@ -7,6 +7,7 @@ obj-y += firmware.o
|
||||
|
||||
obj-$(CONFIG_SA1111) += sa1111.o
|
||||
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
|
||||
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
|
||||
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
|
||||
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
|
||||
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/common/krait-l2-accessors.c
|
||||
@@ -0,0 +1,58 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/spinlock.h>
|
||||
+#include <linux/export.h>
|
||||
+
|
||||
+#include <asm/barrier.h>
|
||||
+#include <asm/krait-l2-accessors.h>
|
||||
+
|
||||
+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
|
||||
+
|
||||
+void krait_set_l2_indirect_reg(u32 addr, u32 val)
|
||||
+{
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
|
||||
+ /*
|
||||
+ * Select the L2 window by poking l2cpselr, then write to the window
|
||||
+ * via l2cpdr.
|
||||
+ */
|
||||
+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
|
||||
+ isb();
|
||||
+ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
|
||||
+ isb();
|
||||
+
|
||||
+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
|
||||
+}
|
||||
+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
|
||||
+
|
||||
+u32 krait_get_l2_indirect_reg(u32 addr)
|
||||
+{
|
||||
+ u32 val;
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
|
||||
+ /*
|
||||
+ * Select the L2 window by poking l2cpselr, then read from the window
|
||||
+ * via l2cpdr.
|
||||
+ */
|
||||
+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
|
||||
+ isb();
|
||||
+ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
|
||||
+
|
||||
+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
|
||||
+
|
||||
+ return val;
|
||||
+}
|
||||
+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/include/asm/krait-l2-accessors.h
|
||||
@@ -0,0 +1,20 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
|
||||
+#define __ASMARM_KRAIT_L2_ACCESSORS_H
|
||||
+
|
||||
+extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
|
||||
+extern u32 krait_get_l2_indirect_reg(u32 addr);
|
||||
+
|
||||
+#endif
|
||||
@ -0,0 +1,195 @@
|
||||
From patchwork Fri Dec 8 09:42:20 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,02/12] clk: mux: Split out register accessors for reuse
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102103
|
||||
Message-Id: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:20 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
We want to reuse the logic in clk-mux.c for other clock drivers
|
||||
that don't use readl as register accessors. Fortunately, there
|
||||
really isn't much to the mux code besides the table indirection
|
||||
and quirk flags if you assume any bit shifting and masking has
|
||||
been done already. Pull that logic out into reusable functions
|
||||
that operate on an optional table and some flags so that other
|
||||
drivers can use the same logic.
|
||||
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
drivers/clk/clk-mux.c | 75 +++++++++++++++++++++++++++-----------------
|
||||
include/linux/clk-provider.h | 9 ++++--
|
||||
2 files changed, 54 insertions(+), 30 deletions(-)
|
||||
|
||||
--- a/drivers/clk/clk-mux.c
|
||||
+++ b/drivers/clk/clk-mux.c
|
||||
@@ -26,35 +26,24 @@
|
||||
* parent - parent is adjustable through clk_set_parent
|
||||
*/
|
||||
|
||||
-static u8 clk_mux_get_parent(struct clk_hw *hw)
|
||||
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
|
||||
+ unsigned int *table, unsigned long flags)
|
||||
{
|
||||
- struct clk_mux *mux = to_clk_mux(hw);
|
||||
int num_parents = clk_hw_get_num_parents(hw);
|
||||
- u32 val;
|
||||
-
|
||||
- /*
|
||||
- * FIXME need a mux-specific flag to determine if val is bitwise or numeric
|
||||
- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
|
||||
- * to 0x7 (index starts at one)
|
||||
- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
|
||||
- * val = 0x4 really means "bit 2, index starts at bit 0"
|
||||
- */
|
||||
- val = clk_readl(mux->reg) >> mux->shift;
|
||||
- val &= mux->mask;
|
||||
|
||||
- if (mux->table) {
|
||||
+ if (table) {
|
||||
int i;
|
||||
|
||||
for (i = 0; i < num_parents; i++)
|
||||
- if (mux->table[i] == val)
|
||||
+ if (table[i] == val)
|
||||
return i;
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
|
||||
+ if (val && (flags & CLK_MUX_INDEX_BIT))
|
||||
val = ffs(val) - 1;
|
||||
|
||||
- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
|
||||
+ if (val && (flags & CLK_MUX_INDEX_ONE))
|
||||
val--;
|
||||
|
||||
if (val >= num_parents)
|
||||
@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
|
||||
|
||||
return val;
|
||||
}
|
||||
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
|
||||
|
||||
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
|
||||
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
|
||||
{
|
||||
struct clk_mux *mux = to_clk_mux(hw);
|
||||
u32 val;
|
||||
- unsigned long flags = 0;
|
||||
|
||||
- if (mux->table) {
|
||||
- index = mux->table[index];
|
||||
+ /*
|
||||
+ * FIXME need a mux-specific flag to determine if val is bitwise or
|
||||
+ * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide,
|
||||
+ * but ranges from 0x1 to 0x7 (index starts at one)
|
||||
+ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
|
||||
+ * val = 0x4 really means "bit 2, index starts at bit 0"
|
||||
+ */
|
||||
+ val = clk_readl(mux->reg) >> mux->shift;
|
||||
+ val &= mux->mask;
|
||||
+
|
||||
+ return clk_mux_get_parent(hw, val, mux->table, mux->flags);
|
||||
+}
|
||||
+
|
||||
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
|
||||
+ unsigned long flags)
|
||||
+{
|
||||
+ unsigned int val = index;
|
||||
+
|
||||
+ if (table) {
|
||||
+ val = table[val];
|
||||
} else {
|
||||
- if (mux->flags & CLK_MUX_INDEX_BIT)
|
||||
- index = 1 << index;
|
||||
+ if (flags & CLK_MUX_INDEX_BIT)
|
||||
+ val = 1 << index;
|
||||
|
||||
- if (mux->flags & CLK_MUX_INDEX_ONE)
|
||||
- index++;
|
||||
+ if (flags & CLK_MUX_INDEX_ONE)
|
||||
+ val++;
|
||||
}
|
||||
|
||||
+ return val;
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
|
||||
+
|
||||
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
|
||||
+{
|
||||
+ struct clk_mux *mux = to_clk_mux(hw);
|
||||
+ u32 val;
|
||||
+ unsigned long flags = 0;
|
||||
+
|
||||
+ index = clk_mux_reindex(index, mux->table, mux->flags);
|
||||
+
|
||||
if (mux->lock)
|
||||
spin_lock_irqsave(mux->lock, flags);
|
||||
else
|
||||
@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
|
||||
}
|
||||
|
||||
const struct clk_ops clk_mux_ops = {
|
||||
- .get_parent = clk_mux_get_parent,
|
||||
+ .get_parent = _clk_mux_get_parent,
|
||||
.set_parent = clk_mux_set_parent,
|
||||
.determine_rate = __clk_mux_determine_rate,
|
||||
};
|
||||
EXPORT_SYMBOL_GPL(clk_mux_ops);
|
||||
|
||||
const struct clk_ops clk_mux_ro_ops = {
|
||||
- .get_parent = clk_mux_get_parent,
|
||||
+ .get_parent = _clk_mux_get_parent,
|
||||
};
|
||||
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
|
||||
|
||||
@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
|
||||
const char * const *parent_names, u8 num_parents,
|
||||
unsigned long flags,
|
||||
void __iomem *reg, u8 shift, u32 mask,
|
||||
- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
|
||||
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
|
||||
{
|
||||
struct clk_mux *mux;
|
||||
struct clk_hw *hw;
|
||||
--- a/include/linux/clk-provider.h
|
||||
+++ b/include/linux/clk-provider.h
|
||||
@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
|
||||
struct clk_mux {
|
||||
struct clk_hw hw;
|
||||
void __iomem *reg;
|
||||
- u32 *table;
|
||||
+ unsigned int *table;
|
||||
u32 mask;
|
||||
u8 shift;
|
||||
u8 flags;
|
||||
@@ -486,6 +486,11 @@ struct clk_mux {
|
||||
extern const struct clk_ops clk_mux_ops;
|
||||
extern const struct clk_ops clk_mux_ro_ops;
|
||||
|
||||
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
|
||||
+ unsigned int *table, unsigned long flags);
|
||||
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
|
||||
+ unsigned long flags);
|
||||
+
|
||||
struct clk *clk_register_mux(struct device *dev, const char *name,
|
||||
const char * const *parent_names, u8 num_parents,
|
||||
unsigned long flags,
|
||||
@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
|
||||
const char * const *parent_names, u8 num_parents,
|
||||
unsigned long flags,
|
||||
void __iomem *reg, u8 shift, u32 mask,
|
||||
- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
|
||||
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
|
||||
|
||||
void clk_unregister_mux(struct clk *clk);
|
||||
void clk_hw_unregister_mux(struct clk_hw *hw);
|
||||
@ -0,0 +1,352 @@
|
||||
From patchwork Fri Dec 8 09:42:21 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102083
|
||||
Message-Id: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:21 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
HFPLLs are the main frequency source for Krait CPU clocks. Add
|
||||
support for changing the rate of these PLLs.
|
||||
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
drivers/clk/qcom/Makefile | 1 +
|
||||
drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
|
||||
drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
|
||||
3 files changed, 308 insertions(+)
|
||||
create mode 100644 drivers/clk/qcom/clk-hfpll.c
|
||||
create mode 100644 drivers/clk/qcom/clk-hfpll.h
|
||||
|
||||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
|
||||
clk-qcom-y += clk-branch.o
|
||||
clk-qcom-y += clk-regmap-divider.o
|
||||
clk-qcom-y += clk-regmap-mux.o
|
||||
+clk-qcom-y += clk-hfpll.o
|
||||
clk-qcom-y += reset.o
|
||||
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
|
||||
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/clk-hfpll.c
|
||||
@@ -0,0 +1,253 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/export.h>
|
||||
+#include <linux/regmap.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/spinlock.h>
|
||||
+
|
||||
+#include "clk-regmap.h"
|
||||
+#include "clk-hfpll.h"
|
||||
+
|
||||
+#define PLL_OUTCTRL BIT(0)
|
||||
+#define PLL_BYPASSNL BIT(1)
|
||||
+#define PLL_RESET_N BIT(2)
|
||||
+
|
||||
+/* Initialize a HFPLL at a given rate and enable it. */
|
||||
+static void __clk_hfpll_init_once(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+
|
||||
+ if (likely(h->init_done))
|
||||
+ return;
|
||||
+
|
||||
+ /* Configure PLL parameters for integer mode. */
|
||||
+ if (hd->config_val)
|
||||
+ regmap_write(regmap, hd->config_reg, hd->config_val);
|
||||
+ regmap_write(regmap, hd->m_reg, 0);
|
||||
+ regmap_write(regmap, hd->n_reg, 1);
|
||||
+
|
||||
+ if (hd->user_reg) {
|
||||
+ u32 regval = hd->user_val;
|
||||
+ unsigned long rate;
|
||||
+
|
||||
+ rate = clk_hw_get_rate(hw);
|
||||
+
|
||||
+ /* Pick the right VCO. */
|
||||
+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
|
||||
+ regval |= hd->user_vco_mask;
|
||||
+ regmap_write(regmap, hd->user_reg, regval);
|
||||
+ }
|
||||
+
|
||||
+ if (hd->droop_reg)
|
||||
+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
|
||||
+
|
||||
+ h->init_done = true;
|
||||
+}
|
||||
+
|
||||
+static void __clk_hfpll_enable(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ u32 val;
|
||||
+
|
||||
+ __clk_hfpll_init_once(hw);
|
||||
+
|
||||
+ /* Disable PLL bypass mode. */
|
||||
+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
|
||||
+
|
||||
+ /*
|
||||
+ * H/W requires a 5us delay between disabling the bypass and
|
||||
+ * de-asserting the reset. Delay 10us just to be safe.
|
||||
+ */
|
||||
+ usleep_range(10, 100);
|
||||
+
|
||||
+ /* De-assert active-low PLL reset. */
|
||||
+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
|
||||
+
|
||||
+ /* Wait for PLL to lock. */
|
||||
+ if (hd->status_reg) {
|
||||
+ do {
|
||||
+ regmap_read(regmap, hd->status_reg, &val);
|
||||
+ } while (!(val & BIT(hd->lock_bit)));
|
||||
+ } else {
|
||||
+ usleep_range(60, 100);
|
||||
+ }
|
||||
+
|
||||
+ /* Enable PLL output. */
|
||||
+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
|
||||
+}
|
||||
+
|
||||
+/* Enable an already-configured HFPLL. */
|
||||
+static int clk_hfpll_enable(struct clk_hw *hw)
|
||||
+{
|
||||
+ unsigned long flags;
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ u32 mode;
|
||||
+
|
||||
+ spin_lock_irqsave(&h->lock, flags);
|
||||
+ regmap_read(regmap, hd->mode_reg, &mode);
|
||||
+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
|
||||
+ __clk_hfpll_enable(hw);
|
||||
+ spin_unlock_irqrestore(&h->lock, flags);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void __clk_hfpll_disable(struct clk_hfpll *h)
|
||||
+{
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+
|
||||
+ /*
|
||||
+ * Disable the PLL output, disable test mode, enable the bypass mode,
|
||||
+ * and assert the reset.
|
||||
+ */
|
||||
+ regmap_update_bits(regmap, hd->mode_reg,
|
||||
+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
|
||||
+}
|
||||
+
|
||||
+static void clk_hfpll_disable(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ spin_lock_irqsave(&h->lock, flags);
|
||||
+ __clk_hfpll_disable(h);
|
||||
+ spin_unlock_irqrestore(&h->lock, flags);
|
||||
+}
|
||||
+
|
||||
+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
|
||||
+ unsigned long *parent_rate)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ unsigned long rrate;
|
||||
+
|
||||
+ rate = clamp(rate, hd->min_rate, hd->max_rate);
|
||||
+
|
||||
+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
|
||||
+ if (rrate > hd->max_rate)
|
||||
+ rrate -= *parent_rate;
|
||||
+
|
||||
+ return rrate;
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+ * For optimization reasons, assumes no downstream clocks are actively using
|
||||
+ * it.
|
||||
+ */
|
||||
+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
+ unsigned long parent_rate)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ unsigned long flags;
|
||||
+ u32 l_val, val;
|
||||
+ bool enabled;
|
||||
+
|
||||
+ l_val = rate / parent_rate;
|
||||
+
|
||||
+ spin_lock_irqsave(&h->lock, flags);
|
||||
+
|
||||
+ enabled = __clk_is_enabled(hw->clk);
|
||||
+ if (enabled)
|
||||
+ __clk_hfpll_disable(h);
|
||||
+
|
||||
+ /* Pick the right VCO. */
|
||||
+ if (hd->user_reg && hd->user_vco_mask) {
|
||||
+ regmap_read(regmap, hd->user_reg, &val);
|
||||
+ if (rate <= hd->low_vco_max_rate)
|
||||
+ val &= ~hd->user_vco_mask;
|
||||
+ else
|
||||
+ val |= hd->user_vco_mask;
|
||||
+ regmap_write(regmap, hd->user_reg, val);
|
||||
+ }
|
||||
+
|
||||
+ regmap_write(regmap, hd->l_reg, l_val);
|
||||
+
|
||||
+ if (enabled)
|
||||
+ __clk_hfpll_enable(hw);
|
||||
+
|
||||
+ spin_unlock_irqrestore(&h->lock, flags);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
|
||||
+ unsigned long parent_rate)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ u32 l_val;
|
||||
+
|
||||
+ regmap_read(regmap, hd->l_reg, &l_val);
|
||||
+
|
||||
+ return l_val * parent_rate;
|
||||
+}
|
||||
+
|
||||
+static void clk_hfpll_init(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ u32 mode, status;
|
||||
+
|
||||
+ regmap_read(regmap, hd->mode_reg, &mode);
|
||||
+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
|
||||
+ __clk_hfpll_init_once(hw);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ if (hd->status_reg) {
|
||||
+ regmap_read(regmap, hd->status_reg, &status);
|
||||
+ if (!(status & BIT(hd->lock_bit))) {
|
||||
+ WARN(1, "HFPLL %s is ON, but not locked!\n",
|
||||
+ __clk_get_name(hw->clk));
|
||||
+ clk_hfpll_disable(hw);
|
||||
+ __clk_hfpll_init_once(hw);
|
||||
+ }
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static int hfpll_is_enabled(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct clk_hfpll *h = to_clk_hfpll(hw);
|
||||
+ struct hfpll_data const *hd = h->d;
|
||||
+ struct regmap *regmap = h->clkr.regmap;
|
||||
+ u32 mode;
|
||||
+
|
||||
+ regmap_read(regmap, hd->mode_reg, &mode);
|
||||
+ mode &= 0x7;
|
||||
+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
|
||||
+}
|
||||
+
|
||||
+const struct clk_ops clk_ops_hfpll = {
|
||||
+ .enable = clk_hfpll_enable,
|
||||
+ .disable = clk_hfpll_disable,
|
||||
+ .is_enabled = hfpll_is_enabled,
|
||||
+ .round_rate = clk_hfpll_round_rate,
|
||||
+ .set_rate = clk_hfpll_set_rate,
|
||||
+ .recalc_rate = clk_hfpll_recalc_rate,
|
||||
+ .init = clk_hfpll_init,
|
||||
+};
|
||||
+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/clk-hfpll.h
|
||||
@@ -0,0 +1,54 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+#ifndef __QCOM_CLK_HFPLL_H__
|
||||
+#define __QCOM_CLK_HFPLL_H__
|
||||
+
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/spinlock.h>
|
||||
+#include "clk-regmap.h"
|
||||
+
|
||||
+struct hfpll_data {
|
||||
+ u32 mode_reg;
|
||||
+ u32 l_reg;
|
||||
+ u32 m_reg;
|
||||
+ u32 n_reg;
|
||||
+ u32 user_reg;
|
||||
+ u32 droop_reg;
|
||||
+ u32 config_reg;
|
||||
+ u32 status_reg;
|
||||
+ u8 lock_bit;
|
||||
+
|
||||
+ u32 droop_val;
|
||||
+ u32 config_val;
|
||||
+ u32 user_val;
|
||||
+ u32 user_vco_mask;
|
||||
+ unsigned long low_vco_max_rate;
|
||||
+
|
||||
+ unsigned long min_rate;
|
||||
+ unsigned long max_rate;
|
||||
+};
|
||||
+
|
||||
+struct clk_hfpll {
|
||||
+ struct hfpll_data const *d;
|
||||
+ int init_done;
|
||||
+
|
||||
+ struct clk_regmap clkr;
|
||||
+ spinlock_t lock;
|
||||
+};
|
||||
+
|
||||
+#define to_clk_hfpll(_hw) \
|
||||
+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
|
||||
+
|
||||
+extern const struct clk_ops clk_ops_hfpll;
|
||||
+
|
||||
+#endif
|
||||
@ -0,0 +1,206 @@
|
||||
From patchwork Fri Dec 8 09:42:22 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,04/12] clk: qcom: Add HFPLL driver
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102079
|
||||
Message-Id: <1512726150-7204-5-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:22 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
On some devices (MSM8974 for example), the HFPLLs are
|
||||
instantiated within the Krait processor subsystem as separate
|
||||
register regions. Add a driver for these PLLs so that we can
|
||||
provide HFPLL clocks for use by the system.
|
||||
|
||||
Cc: <devicetree@vger.kernel.org>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++
|
||||
drivers/clk/qcom/Kconfig | 8 ++
|
||||
drivers/clk/qcom/Makefile | 1 +
|
||||
drivers/clk/qcom/hfpll.c | 106 +++++++++++++++++++++
|
||||
4 files changed, 155 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
|
||||
create mode 100644 drivers/clk/qcom/hfpll.c
|
||||
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
|
||||
@@ -0,0 +1,40 @@
|
||||
+High-Frequency PLL (HFPLL)
|
||||
+
|
||||
+PROPERTIES
|
||||
+
|
||||
+- compatible:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: must be "qcom,hfpll"
|
||||
+
|
||||
+- reg:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: address and size of HPLL registers. An optional second
|
||||
+ element specifies the address and size of the alias
|
||||
+ register region.
|
||||
+
|
||||
+- clock-output-names:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
|
||||
+ starting at 0. Otherwise hfpll_Y where Y is more specific
|
||||
+ such as "l2".
|
||||
+
|
||||
+Example:
|
||||
+
|
||||
+1) An HFPLL for the L2 cache.
|
||||
+
|
||||
+ clock-controller@f9016000 {
|
||||
+ compatible = "qcom,hfpll";
|
||||
+ reg = <0xf9016000 0x30>;
|
||||
+ clock-output-names = "hfpll_l2";
|
||||
+ };
|
||||
+
|
||||
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
|
||||
+
|
||||
+ clock-controller@f908a000 {
|
||||
+ compatible = "qcom,hfpll";
|
||||
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
|
||||
+ clock-output-names = "hfpll0";
|
||||
+ };
|
||||
--- a/drivers/clk/qcom/Kconfig
|
||||
+++ b/drivers/clk/qcom/Kconfig
|
||||
@@ -196,3 +196,11 @@ config MSM_MMCC_8996
|
||||
Support for the multimedia clock controller on msm8996 devices.
|
||||
Say Y if you want to support multimedia devices such as display,
|
||||
graphics, video encode/decode, camera, etc.
|
||||
+
|
||||
+config QCOM_HFPLL
|
||||
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
|
||||
+ depends on COMMON_CLK_QCOM
|
||||
+ help
|
||||
+ Support for the high-frequency PLLs present on Qualcomm devices.
|
||||
+ Say Y if you want to support CPU frequency scaling on devices
|
||||
+ such as MSM8974, APQ8084, etc.
|
||||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -35,3 +35,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
|
||||
obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
|
||||
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
|
||||
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
|
||||
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/hfpll.c
|
||||
@@ -0,0 +1,106 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/regmap.h>
|
||||
+
|
||||
+#include "clk-regmap.h"
|
||||
+#include "clk-hfpll.h"
|
||||
+
|
||||
+static const struct hfpll_data hdata = {
|
||||
+ .mode_reg = 0x00,
|
||||
+ .l_reg = 0x04,
|
||||
+ .m_reg = 0x08,
|
||||
+ .n_reg = 0x0c,
|
||||
+ .user_reg = 0x10,
|
||||
+ .config_reg = 0x14,
|
||||
+ .config_val = 0x430405d,
|
||||
+ .status_reg = 0x1c,
|
||||
+ .lock_bit = 16,
|
||||
+
|
||||
+ .user_val = 0x8,
|
||||
+ .user_vco_mask = 0x100000,
|
||||
+ .low_vco_max_rate = 1248000000,
|
||||
+ .min_rate = 537600000UL,
|
||||
+ .max_rate = 2900000000UL,
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id qcom_hfpll_match_table[] = {
|
||||
+ { .compatible = "qcom,hfpll" },
|
||||
+ { }
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
|
||||
+
|
||||
+static const struct regmap_config hfpll_regmap_config = {
|
||||
+ .reg_bits = 32,
|
||||
+ .reg_stride = 4,
|
||||
+ .val_bits = 32,
|
||||
+ .max_register = 0x30,
|
||||
+ .fast_io = true,
|
||||
+};
|
||||
+
|
||||
+static int qcom_hfpll_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct resource *res;
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ void __iomem *base;
|
||||
+ struct regmap *regmap;
|
||||
+ struct clk_hfpll *h;
|
||||
+ struct clk_init_data init = {
|
||||
+ .parent_names = (const char *[]){ "xo" },
|
||||
+ .num_parents = 1,
|
||||
+ .ops = &clk_ops_hfpll,
|
||||
+ };
|
||||
+
|
||||
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
|
||||
+ if (!h)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ base = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(base))
|
||||
+ return PTR_ERR(base);
|
||||
+
|
||||
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
|
||||
+ if (IS_ERR(regmap))
|
||||
+ return PTR_ERR(regmap);
|
||||
+
|
||||
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
|
||||
+ 0, &init.name))
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ h->d = &hdata;
|
||||
+ h->clkr.hw.init = &init;
|
||||
+ spin_lock_init(&h->lock);
|
||||
+
|
||||
+ return devm_clk_register_regmap(&pdev->dev, &h->clkr);
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver qcom_hfpll_driver = {
|
||||
+ .probe = qcom_hfpll_probe,
|
||||
+ .driver = {
|
||||
+ .name = "qcom-hfpll",
|
||||
+ .of_match_table = qcom_hfpll_match_table,
|
||||
+ },
|
||||
+};
|
||||
+module_platform_driver(qcom_hfpll_driver);
|
||||
+
|
||||
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_ALIAS("platform:qcom-hfpll");
|
||||
@ -0,0 +1,129 @@
|
||||
From patchwork Fri Dec 8 09:42:24 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,06/12] clk: qcom: Add IPQ806X's HFPLLs
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102047
|
||||
Message-Id: <1512726150-7204-7-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:24 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
Describe the HFPLLs present on IPQ806X devices.
|
||||
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 82 insertions(+)
|
||||
|
||||
--- a/drivers/clk/qcom/gcc-ipq806x.c
|
||||
+++ b/drivers/clk/qcom/gcc-ipq806x.c
|
||||
@@ -30,6 +30,7 @@
|
||||
#include "clk-pll.h"
|
||||
#include "clk-rcg.h"
|
||||
#include "clk-branch.h"
|
||||
+#include "clk-hfpll.h"
|
||||
#include "reset.h"
|
||||
|
||||
static struct clk_pll pll0 = {
|
||||
@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
|
||||
},
|
||||
};
|
||||
|
||||
+static struct hfpll_data hfpll0_data = {
|
||||
+ .mode_reg = 0x3200,
|
||||
+ .l_reg = 0x3208,
|
||||
+ .m_reg = 0x320c,
|
||||
+ .n_reg = 0x3210,
|
||||
+ .config_reg = 0x3204,
|
||||
+ .status_reg = 0x321c,
|
||||
+ .config_val = 0x7845c665,
|
||||
+ .droop_reg = 0x3214,
|
||||
+ .droop_val = 0x0108c000,
|
||||
+ .min_rate = 600000000UL,
|
||||
+ .max_rate = 1800000000UL,
|
||||
+};
|
||||
+
|
||||
+static struct clk_hfpll hfpll0 = {
|
||||
+ .d = &hfpll0_data,
|
||||
+ .clkr.hw.init = &(struct clk_init_data){
|
||||
+ .parent_names = (const char *[]){ "pxo" },
|
||||
+ .num_parents = 1,
|
||||
+ .name = "hfpll0",
|
||||
+ .ops = &clk_ops_hfpll,
|
||||
+ .flags = CLK_IGNORE_UNUSED,
|
||||
+ },
|
||||
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
|
||||
+};
|
||||
+
|
||||
+static struct hfpll_data hfpll1_data = {
|
||||
+ .mode_reg = 0x3240,
|
||||
+ .l_reg = 0x3248,
|
||||
+ .m_reg = 0x324c,
|
||||
+ .n_reg = 0x3250,
|
||||
+ .config_reg = 0x3244,
|
||||
+ .status_reg = 0x325c,
|
||||
+ .config_val = 0x7845c665,
|
||||
+ .droop_reg = 0x3314,
|
||||
+ .droop_val = 0x0108c000,
|
||||
+ .min_rate = 600000000UL,
|
||||
+ .max_rate = 1800000000UL,
|
||||
+};
|
||||
+
|
||||
+static struct clk_hfpll hfpll1 = {
|
||||
+ .d = &hfpll1_data,
|
||||
+ .clkr.hw.init = &(struct clk_init_data){
|
||||
+ .parent_names = (const char *[]){ "pxo" },
|
||||
+ .num_parents = 1,
|
||||
+ .name = "hfpll1",
|
||||
+ .ops = &clk_ops_hfpll,
|
||||
+ .flags = CLK_IGNORE_UNUSED,
|
||||
+ },
|
||||
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
|
||||
+};
|
||||
+
|
||||
+static struct hfpll_data hfpll_l2_data = {
|
||||
+ .mode_reg = 0x3300,
|
||||
+ .l_reg = 0x3308,
|
||||
+ .m_reg = 0x330c,
|
||||
+ .n_reg = 0x3310,
|
||||
+ .config_reg = 0x3304,
|
||||
+ .status_reg = 0x331c,
|
||||
+ .config_val = 0x7845c665,
|
||||
+ .droop_reg = 0x3314,
|
||||
+ .droop_val = 0x0108c000,
|
||||
+ .min_rate = 600000000UL,
|
||||
+ .max_rate = 1800000000UL,
|
||||
+};
|
||||
+
|
||||
+static struct clk_hfpll hfpll_l2 = {
|
||||
+ .d = &hfpll_l2_data,
|
||||
+ .clkr.hw.init = &(struct clk_init_data){
|
||||
+ .parent_names = (const char *[]){ "pxo" },
|
||||
+ .num_parents = 1,
|
||||
+ .name = "hfpll_l2",
|
||||
+ .ops = &clk_ops_hfpll,
|
||||
+ .flags = CLK_IGNORE_UNUSED,
|
||||
+ },
|
||||
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
|
||||
+};
|
||||
+
|
||||
static struct clk_pll pll14 = {
|
||||
.l_reg = 0x31c4,
|
||||
.m_reg = 0x31c8,
|
||||
@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
|
||||
[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
|
||||
[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
|
||||
[NSSTCM_CLK] = &nss_tcm_clk.clkr,
|
||||
+ [PLL9] = &hfpll0.clkr,
|
||||
+ [PLL10] = &hfpll1.clkr,
|
||||
+ [PLL12] = &hfpll_l2.clkr,
|
||||
};
|
||||
|
||||
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
|
||||
@ -0,0 +1,241 @@
|
||||
From patchwork Fri Dec 8 09:42:25 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,07/12] clk: qcom: Add support for Krait clocks
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102051
|
||||
Message-Id: <1512726150-7204-8-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:25 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
The Krait clocks are made up of a series of muxes and a divider
|
||||
that choose between a fixed rate clock and dedicated HFPLLs for
|
||||
each CPU. Instead of using mmio accesses to remux parents, the
|
||||
Krait implementation exposes the remux control via cp15
|
||||
registers. Support these clocks.
|
||||
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
drivers/clk/qcom/Kconfig | 4 ++
|
||||
drivers/clk/qcom/Makefile | 1 +
|
||||
drivers/clk/qcom/clk-krait.c | 134 +++++++++++++++++++++++++++++++++++++++++++
|
||||
drivers/clk/qcom/clk-krait.h | 48 ++++++++++++++++
|
||||
4 files changed, 187 insertions(+)
|
||||
create mode 100644 drivers/clk/qcom/clk-krait.c
|
||||
create mode 100644 drivers/clk/qcom/clk-krait.h
|
||||
|
||||
--- a/drivers/clk/qcom/Kconfig
|
||||
+++ b/drivers/clk/qcom/Kconfig
|
||||
@@ -204,3 +204,7 @@ config QCOM_HFPLL
|
||||
Support for the high-frequency PLLs present on Qualcomm devices.
|
||||
Say Y if you want to support CPU frequency scaling on devices
|
||||
such as MSM8974, APQ8084, etc.
|
||||
+
|
||||
+config KRAIT_CLOCKS
|
||||
+ bool
|
||||
+ select KRAIT_L2_ACCESSORS
|
||||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
|
||||
clk-qcom-y += clk-branch.o
|
||||
clk-qcom-y += clk-regmap-divider.o
|
||||
clk-qcom-y += clk-regmap-mux.o
|
||||
+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
|
||||
clk-qcom-y += clk-hfpll.o
|
||||
clk-qcom-y += reset.o
|
||||
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/clk-krait.c
|
||||
@@ -0,0 +1,134 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/spinlock.h>
|
||||
+
|
||||
+#include <asm/krait-l2-accessors.h>
|
||||
+
|
||||
+#include "clk-krait.h"
|
||||
+
|
||||
+/* Secondary and primary muxes share the same cp15 register */
|
||||
+static DEFINE_SPINLOCK(krait_clock_reg_lock);
|
||||
+
|
||||
+#define LPL_SHIFT 8
|
||||
+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
|
||||
+{
|
||||
+ unsigned long flags;
|
||||
+ u32 regval;
|
||||
+
|
||||
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
|
||||
+ regval = krait_get_l2_indirect_reg(mux->offset);
|
||||
+ regval &= ~(mux->mask << mux->shift);
|
||||
+ regval |= (sel & mux->mask) << mux->shift;
|
||||
+ if (mux->lpl) {
|
||||
+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
|
||||
+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
|
||||
+ }
|
||||
+ krait_set_l2_indirect_reg(mux->offset, regval);
|
||||
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
|
||||
+
|
||||
+ /* Wait for switch to complete. */
|
||||
+ mb();
|
||||
+ udelay(1);
|
||||
+}
|
||||
+
|
||||
+static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
|
||||
+{
|
||||
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
|
||||
+ u32 sel;
|
||||
+
|
||||
+ sel = clk_mux_reindex(index, mux->parent_map, 0);
|
||||
+ mux->en_mask = sel;
|
||||
+ /* Don't touch mux if CPU is off as it won't work */
|
||||
+ if (__clk_is_enabled(hw->clk))
|
||||
+ __krait_mux_set_sel(mux, sel);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static u8 krait_mux_get_parent(struct clk_hw *hw)
|
||||
+{
|
||||
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
|
||||
+ u32 sel;
|
||||
+
|
||||
+ sel = krait_get_l2_indirect_reg(mux->offset);
|
||||
+ sel >>= mux->shift;
|
||||
+ sel &= mux->mask;
|
||||
+ mux->en_mask = sel;
|
||||
+
|
||||
+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
|
||||
+}
|
||||
+
|
||||
+const struct clk_ops krait_mux_clk_ops = {
|
||||
+ .set_parent = krait_mux_set_parent,
|
||||
+ .get_parent = krait_mux_get_parent,
|
||||
+ .determine_rate = __clk_mux_determine_rate_closest,
|
||||
+};
|
||||
+EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
|
||||
+
|
||||
+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
|
||||
+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
|
||||
+ unsigned long *parent_rate)
|
||||
+{
|
||||
+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
|
||||
+ return DIV_ROUND_UP(*parent_rate, 2);
|
||||
+}
|
||||
+
|
||||
+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
+ unsigned long parent_rate)
|
||||
+{
|
||||
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
|
||||
+ unsigned long flags;
|
||||
+ u32 val;
|
||||
+ u32 mask = BIT(d->width) - 1;
|
||||
+
|
||||
+ if (d->lpl)
|
||||
+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
|
||||
+
|
||||
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
|
||||
+ val = krait_get_l2_indirect_reg(d->offset);
|
||||
+ val &= ~mask;
|
||||
+ krait_set_l2_indirect_reg(d->offset, val);
|
||||
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static unsigned long
|
||||
+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||||
+{
|
||||
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
|
||||
+ u32 mask = BIT(d->width) - 1;
|
||||
+ u32 div;
|
||||
+
|
||||
+ div = krait_get_l2_indirect_reg(d->offset);
|
||||
+ div >>= d->shift;
|
||||
+ div &= mask;
|
||||
+ div = (div + 1) * 2;
|
||||
+
|
||||
+ return DIV_ROUND_UP(parent_rate, div);
|
||||
+}
|
||||
+
|
||||
+const struct clk_ops krait_div2_clk_ops = {
|
||||
+ .round_rate = krait_div2_round_rate,
|
||||
+ .set_rate = krait_div2_set_rate,
|
||||
+ .recalc_rate = krait_div2_recalc_rate,
|
||||
+};
|
||||
+EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/clk-krait.h
|
||||
@@ -0,0 +1,48 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#ifndef __QCOM_CLK_KRAIT_H
|
||||
+#define __QCOM_CLK_KRAIT_H
|
||||
+
|
||||
+#include <linux/clk-provider.h>
|
||||
+
|
||||
+struct krait_mux_clk {
|
||||
+ unsigned int *parent_map;
|
||||
+ u32 offset;
|
||||
+ u32 mask;
|
||||
+ u32 shift;
|
||||
+ u32 en_mask;
|
||||
+ bool lpl;
|
||||
+
|
||||
+ struct clk_hw hw;
|
||||
+ struct notifier_block clk_nb;
|
||||
+};
|
||||
+
|
||||
+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
|
||||
+
|
||||
+extern const struct clk_ops krait_mux_clk_ops;
|
||||
+
|
||||
+struct krait_div2_clk {
|
||||
+ u32 offset;
|
||||
+ u8 width;
|
||||
+ u32 shift;
|
||||
+ bool lpl;
|
||||
+
|
||||
+ struct clk_hw hw;
|
||||
+};
|
||||
+
|
||||
+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
|
||||
+
|
||||
+extern const struct clk_ops krait_div2_clk_ops;
|
||||
+
|
||||
+#endif
|
||||
@ -0,0 +1,209 @@
|
||||
From patchwork Fri Dec 8 09:42:26 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,08/12] clk: qcom: Add KPSS ACC/GCC driver
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102023
|
||||
Message-Id: <1512726150-7204-9-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:26 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
The ACC and GCC regions present in KPSSv1 contain registers to
|
||||
control clocks and power to each Krait CPU and L2. For CPUfreq
|
||||
purposes probe these devices and expose a mux clock that chooses
|
||||
between PXO and PLL8.
|
||||
|
||||
Cc: <devicetree@vger.kernel.org>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++
|
||||
.../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++
|
||||
drivers/clk/qcom/Kconfig | 8 ++
|
||||
drivers/clk/qcom/Makefile | 1 +
|
||||
drivers/clk/qcom/kpss-xcc.c | 96 ++++++++++++++++++++++
|
||||
5 files changed, 140 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
|
||||
create mode 100644 drivers/clk/qcom/kpss-xcc.c
|
||||
|
||||
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
|
||||
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
|
||||
@@ -21,10 +21,17 @@ PROPERTIES
|
||||
the register region. An optional second element specifies
|
||||
the base address and size of the alias register region.
|
||||
|
||||
+- clock-output-names:
|
||||
+ Usage: optional
|
||||
+ Value type: <string>
|
||||
+ Definition: Name of the output clock. Typically acpuX_aux where X is a
|
||||
+ CPU number starting at 0.
|
||||
+
|
||||
Example:
|
||||
|
||||
clock-controller@2088000 {
|
||||
compatible = "qcom,kpss-acc-v2";
|
||||
reg = <0x02088000 0x1000>,
|
||||
<0x02008000 0x1000>;
|
||||
+ clock-output-names = "acpu0_aux";
|
||||
};
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
|
||||
@@ -0,0 +1,28 @@
|
||||
+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
|
||||
+
|
||||
+PROPERTIES
|
||||
+
|
||||
+- compatible:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: should be one of:
|
||||
+ "qcom,kpss-gcc"
|
||||
+
|
||||
+- reg:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: base address and size of the register region
|
||||
+
|
||||
+- clock-output-names:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: Name of the output clock. Typically acpu_l2_aux indicating
|
||||
+ an L2 cache auxiliary clock.
|
||||
+
|
||||
+Example:
|
||||
+
|
||||
+ l2cc: clock-controller@2011000 {
|
||||
+ compatible = "qcom,kpss-gcc";
|
||||
+ reg = <0x2011000 0x1000>;
|
||||
+ clock-output-names = "acpu_l2_aux";
|
||||
+ };
|
||||
--- a/drivers/clk/qcom/Kconfig
|
||||
+++ b/drivers/clk/qcom/Kconfig
|
||||
@@ -205,6 +205,14 @@ config QCOM_HFPLL
|
||||
Say Y if you want to support CPU frequency scaling on devices
|
||||
such as MSM8974, APQ8084, etc.
|
||||
|
||||
+config KPSS_XCC
|
||||
+ tristate "KPSS Clock Controller"
|
||||
+ depends on COMMON_CLK_QCOM
|
||||
+ help
|
||||
+ Support for the Krait ACC and GCC clock controllers. Say Y
|
||||
+ if you want to support CPU frequency scaling on devices such
|
||||
+ as MSM8960, APQ8064, etc.
|
||||
+
|
||||
config KRAIT_CLOCKS
|
||||
bool
|
||||
select KRAIT_L2_ACCESSORS
|
||||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
|
||||
obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
|
||||
obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
|
||||
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
|
||||
+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
|
||||
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/kpss-xcc.c
|
||||
@@ -0,0 +1,96 @@
|
||||
+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+
|
||||
+static const char *aux_parents[] = {
|
||||
+ "pll8_vote",
|
||||
+ "pxo",
|
||||
+};
|
||||
+
|
||||
+static unsigned int aux_parent_map[] = {
|
||||
+ 3,
|
||||
+ 0,
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id kpss_xcc_match_table[] = {
|
||||
+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
|
||||
+ { .compatible = "qcom,kpss-gcc" },
|
||||
+ {}
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
|
||||
+
|
||||
+static int kpss_xcc_driver_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ const struct of_device_id *id;
|
||||
+ struct clk *clk;
|
||||
+ struct resource *res;
|
||||
+ void __iomem *base;
|
||||
+ const char *name;
|
||||
+
|
||||
+ id = of_match_device(kpss_xcc_match_table, &pdev->dev);
|
||||
+ if (!id)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ base = devm_ioremap_resource(&pdev->dev, res);
|
||||
+ if (IS_ERR(base))
|
||||
+ return PTR_ERR(base);
|
||||
+
|
||||
+ if (id->data) {
|
||||
+ if (of_property_read_string_index(pdev->dev.of_node,
|
||||
+ "clock-output-names",
|
||||
+ 0, &name))
|
||||
+ return -ENODEV;
|
||||
+ base += 0x14;
|
||||
+ } else {
|
||||
+ name = "acpu_l2_aux";
|
||||
+ base += 0x28;
|
||||
+ }
|
||||
+
|
||||
+ clk = clk_register_mux_table(&pdev->dev, name, aux_parents,
|
||||
+ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3,
|
||||
+ 0, aux_parent_map, NULL);
|
||||
+
|
||||
+ platform_set_drvdata(pdev, clk);
|
||||
+
|
||||
+ return PTR_ERR_OR_ZERO(clk);
|
||||
+}
|
||||
+
|
||||
+static int kpss_xcc_driver_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ clk_unregister_mux(platform_get_drvdata(pdev));
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver kpss_xcc_driver = {
|
||||
+ .probe = kpss_xcc_driver_probe,
|
||||
+ .remove = kpss_xcc_driver_remove,
|
||||
+ .driver = {
|
||||
+ .name = "kpss-xcc",
|
||||
+ .of_match_table = kpss_xcc_match_table,
|
||||
+ },
|
||||
+};
|
||||
+module_platform_driver(kpss_xcc_driver);
|
||||
+
|
||||
+MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_ALIAS("platform:kpss-xcc");
|
||||
@ -0,0 +1,436 @@
|
||||
From patchwork Fri Dec 8 09:42:27 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,09/12] clk: qcom: Add Krait clock controller driver
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102061
|
||||
Message-Id: <1512726150-7204-10-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:27 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
The Krait CPU clocks are made up of a primary mux and secondary
|
||||
mux for each CPU and the L2, controlled via cp15 accessors. For
|
||||
Kraits within KPSSv1 each secondary mux accepts a different aux
|
||||
source, but on KPSSv2 each secondary mux accepts the same aux
|
||||
source.
|
||||
|
||||
Cc: <devicetree@vger.kernel.org>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++
|
||||
drivers/clk/qcom/Kconfig | 8 +
|
||||
drivers/clk/qcom/Makefile | 1 +
|
||||
drivers/clk/qcom/krait-cc.c | 350 +++++++++++++++++++++
|
||||
4 files changed, 381 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
|
||||
create mode 100644 drivers/clk/qcom/krait-cc.c
|
||||
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
|
||||
@@ -0,0 +1,22 @@
|
||||
+Krait Clock Controller
|
||||
+
|
||||
+PROPERTIES
|
||||
+
|
||||
+- compatible:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: must be one of:
|
||||
+ "qcom,krait-cc-v1"
|
||||
+ "qcom,krait-cc-v2"
|
||||
+
|
||||
+- #clock-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: must be 1
|
||||
+
|
||||
+Example:
|
||||
+
|
||||
+ kraitcc: clock-controller {
|
||||
+ compatible = "qcom,krait-cc-v1";
|
||||
+ #clock-cells = <1>;
|
||||
+ };
|
||||
--- a/drivers/clk/qcom/Kconfig
|
||||
+++ b/drivers/clk/qcom/Kconfig
|
||||
@@ -213,6 +213,14 @@ config KPSS_XCC
|
||||
if you want to support CPU frequency scaling on devices such
|
||||
as MSM8960, APQ8064, etc.
|
||||
|
||||
+config KRAITCC
|
||||
+ tristate "Krait Clock Controller"
|
||||
+ depends on COMMON_CLK_QCOM && ARM
|
||||
+ select KRAIT_CLOCKS
|
||||
+ help
|
||||
+ Support for the Krait CPU clocks on Qualcomm devices.
|
||||
+ Say Y if you want to support CPU frequency scaling.
|
||||
+
|
||||
config KRAIT_CLOCKS
|
||||
bool
|
||||
select KRAIT_L2_ACCESSORS
|
||||
--- a/drivers/clk/qcom/Makefile
|
||||
+++ b/drivers/clk/qcom/Makefile
|
||||
@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
|
||||
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
|
||||
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
|
||||
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
|
||||
+obj-$(CONFIG_KRAITCC) += krait-cc.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/clk/qcom/krait-cc.c
|
||||
@@ -0,0 +1,350 @@
|
||||
+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/clk-provider.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include "clk-krait.h"
|
||||
+
|
||||
+static unsigned int sec_mux_map[] = {
|
||||
+ 2,
|
||||
+ 0,
|
||||
+};
|
||||
+
|
||||
+static unsigned int pri_mux_map[] = {
|
||||
+ 1,
|
||||
+ 2,
|
||||
+ 0,
|
||||
+};
|
||||
+
|
||||
+static int
|
||||
+krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
|
||||
+{
|
||||
+ struct krait_div2_clk *div;
|
||||
+ struct clk_init_data init = {
|
||||
+ .num_parents = 1,
|
||||
+ .ops = &krait_div2_clk_ops,
|
||||
+ .flags = CLK_SET_RATE_PARENT,
|
||||
+ };
|
||||
+ const char *p_names[1];
|
||||
+ struct clk *clk;
|
||||
+
|
||||
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
|
||||
+ if (!div)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ div->width = 2;
|
||||
+ div->shift = 6;
|
||||
+ div->lpl = id >= 0;
|
||||
+ div->offset = offset;
|
||||
+ div->hw.init = &init;
|
||||
+
|
||||
+ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
|
||||
+ if (!init.name)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ init.parent_names = p_names;
|
||||
+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
|
||||
+ if (!p_names[0]) {
|
||||
+ kfree(init.name);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+
|
||||
+ clk = devm_clk_register(dev, &div->hw);
|
||||
+ kfree(p_names[0]);
|
||||
+ kfree(init.name);
|
||||
+
|
||||
+ return PTR_ERR_OR_ZERO(clk);
|
||||
+}
|
||||
+
|
||||
+static int
|
||||
+krait_add_sec_mux(struct device *dev, int id, const char *s,
|
||||
+ unsigned int offset, bool unique_aux)
|
||||
+{
|
||||
+ struct krait_mux_clk *mux;
|
||||
+ static const char *sec_mux_list[] = {
|
||||
+ "acpu_aux",
|
||||
+ "qsb",
|
||||
+ };
|
||||
+ struct clk_init_data init = {
|
||||
+ .parent_names = sec_mux_list,
|
||||
+ .num_parents = ARRAY_SIZE(sec_mux_list),
|
||||
+ .ops = &krait_mux_clk_ops,
|
||||
+ .flags = CLK_SET_RATE_PARENT,
|
||||
+ };
|
||||
+ struct clk *clk;
|
||||
+
|
||||
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
|
||||
+ if (!mux)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ mux->offset = offset;
|
||||
+ mux->lpl = id >= 0;
|
||||
+ mux->mask = 0x3;
|
||||
+ mux->shift = 2;
|
||||
+ mux->parent_map = sec_mux_map;
|
||||
+ mux->hw.init = &init;
|
||||
+
|
||||
+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
|
||||
+ if (!init.name)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ if (unique_aux) {
|
||||
+ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
|
||||
+ if (!sec_mux_list[0]) {
|
||||
+ clk = ERR_PTR(-ENOMEM);
|
||||
+ goto err_aux;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ clk = devm_clk_register(dev, &mux->hw);
|
||||
+
|
||||
+ if (unique_aux)
|
||||
+ kfree(sec_mux_list[0]);
|
||||
+err_aux:
|
||||
+ kfree(init.name);
|
||||
+ return PTR_ERR_OR_ZERO(clk);
|
||||
+}
|
||||
+
|
||||
+static struct clk *
|
||||
+krait_add_pri_mux(struct device *dev, int id, const char *s,
|
||||
+ unsigned int offset)
|
||||
+{
|
||||
+ struct krait_mux_clk *mux;
|
||||
+ const char *p_names[3];
|
||||
+ struct clk_init_data init = {
|
||||
+ .parent_names = p_names,
|
||||
+ .num_parents = ARRAY_SIZE(p_names),
|
||||
+ .ops = &krait_mux_clk_ops,
|
||||
+ .flags = CLK_SET_RATE_PARENT,
|
||||
+ };
|
||||
+ struct clk *clk;
|
||||
+
|
||||
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
|
||||
+ if (!mux)
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+
|
||||
+ mux->mask = 0x3;
|
||||
+ mux->shift = 0;
|
||||
+ mux->offset = offset;
|
||||
+ mux->lpl = id >= 0;
|
||||
+ mux->parent_map = pri_mux_map;
|
||||
+ mux->hw.init = &init;
|
||||
+
|
||||
+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
|
||||
+ if (!init.name)
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+
|
||||
+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
|
||||
+ if (!p_names[0]) {
|
||||
+ clk = ERR_PTR(-ENOMEM);
|
||||
+ goto err_p0;
|
||||
+ }
|
||||
+
|
||||
+ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
|
||||
+ if (!p_names[1]) {
|
||||
+ clk = ERR_PTR(-ENOMEM);
|
||||
+ goto err_p1;
|
||||
+ }
|
||||
+
|
||||
+ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
|
||||
+ if (!p_names[2]) {
|
||||
+ clk = ERR_PTR(-ENOMEM);
|
||||
+ goto err_p2;
|
||||
+ }
|
||||
+
|
||||
+ clk = devm_clk_register(dev, &mux->hw);
|
||||
+
|
||||
+ kfree(p_names[2]);
|
||||
+err_p2:
|
||||
+ kfree(p_names[1]);
|
||||
+err_p1:
|
||||
+ kfree(p_names[0]);
|
||||
+err_p0:
|
||||
+ kfree(init.name);
|
||||
+ return clk;
|
||||
+}
|
||||
+
|
||||
+/* id < 0 for L2, otherwise id == physical CPU number */
|
||||
+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
|
||||
+{
|
||||
+ int ret;
|
||||
+ unsigned int offset;
|
||||
+ void *p = NULL;
|
||||
+ const char *s;
|
||||
+ struct clk *clk;
|
||||
+
|
||||
+ if (id >= 0) {
|
||||
+ offset = 0x4501 + (0x1000 * id);
|
||||
+ s = p = kasprintf(GFP_KERNEL, "%d", id);
|
||||
+ if (!s)
|
||||
+ return ERR_PTR(-ENOMEM);
|
||||
+ } else {
|
||||
+ offset = 0x500;
|
||||
+ s = "_l2";
|
||||
+ }
|
||||
+
|
||||
+ ret = krait_add_div(dev, id, s, offset);
|
||||
+ if (ret) {
|
||||
+ clk = ERR_PTR(ret);
|
||||
+ goto err;
|
||||
+ }
|
||||
+
|
||||
+ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
|
||||
+ if (ret) {
|
||||
+ clk = ERR_PTR(ret);
|
||||
+ goto err;
|
||||
+ }
|
||||
+
|
||||
+ clk = krait_add_pri_mux(dev, id, s, offset);
|
||||
+err:
|
||||
+ kfree(p);
|
||||
+ return clk;
|
||||
+}
|
||||
+
|
||||
+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
|
||||
+{
|
||||
+ unsigned int idx = clkspec->args[0];
|
||||
+ struct clk **clks = data;
|
||||
+
|
||||
+ if (idx >= 5) {
|
||||
+ pr_err("%s: invalid clock index %d\n", __func__, idx);
|
||||
+ return ERR_PTR(-EINVAL);
|
||||
+ }
|
||||
+
|
||||
+ return clks[idx] ? : ERR_PTR(-ENODEV);
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id krait_cc_match_table[] = {
|
||||
+ { .compatible = "qcom,krait-cc-v1", (void *)1UL },
|
||||
+ { .compatible = "qcom,krait-cc-v2" },
|
||||
+ {}
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(of, krait_cc_match_table);
|
||||
+
|
||||
+static int krait_cc_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ const struct of_device_id *id;
|
||||
+ unsigned long cur_rate, aux_rate;
|
||||
+ int cpu;
|
||||
+ struct clk *clk;
|
||||
+ struct clk **clks;
|
||||
+ struct clk *l2_pri_mux_clk;
|
||||
+
|
||||
+ id = of_match_device(krait_cc_match_table, dev);
|
||||
+ if (!id)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
|
||||
+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
|
||||
+ if (IS_ERR(clk))
|
||||
+ return PTR_ERR(clk);
|
||||
+
|
||||
+ if (!id->data) {
|
||||
+ clk = clk_register_fixed_factor(dev, "acpu_aux",
|
||||
+ "gpll0_vote", 0, 1, 2);
|
||||
+ if (IS_ERR(clk))
|
||||
+ return PTR_ERR(clk);
|
||||
+ }
|
||||
+
|
||||
+ /* Krait configurations have at most 4 CPUs and one L2 */
|
||||
+ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
|
||||
+ if (!clks)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ for_each_possible_cpu(cpu) {
|
||||
+ clk = krait_add_clks(dev, cpu, id->data);
|
||||
+ if (IS_ERR(clk))
|
||||
+ return PTR_ERR(clk);
|
||||
+ clks[cpu] = clk;
|
||||
+ }
|
||||
+
|
||||
+ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
|
||||
+ if (IS_ERR(l2_pri_mux_clk))
|
||||
+ return PTR_ERR(l2_pri_mux_clk);
|
||||
+ clks[4] = l2_pri_mux_clk;
|
||||
+
|
||||
+ /*
|
||||
+ * We don't want the CPU or L2 clocks to be turned off at late init
|
||||
+ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
|
||||
+ * refcount of these clocks. Any cpufreq/hotplug manager can assume
|
||||
+ * that the clocks have already been prepared and enabled by the time
|
||||
+ * they take over.
|
||||
+ */
|
||||
+ for_each_online_cpu(cpu) {
|
||||
+ clk_prepare_enable(l2_pri_mux_clk);
|
||||
+ WARN(clk_prepare_enable(clks[cpu]),
|
||||
+ "Unable to turn on CPU%d clock", cpu);
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Force reinit of HFPLLs and muxes to overwrite any potential
|
||||
+ * incorrect configuration of HFPLLs and muxes by the bootloader.
|
||||
+ * While at it, also make sure the cores are running at known rates
|
||||
+ * and print the current rate.
|
||||
+ *
|
||||
+ * The clocks are set to aux clock rate first to make sure the
|
||||
+ * secondary mux is not sourcing off of QSB. The rate is then set to
|
||||
+ * two different rates to force a HFPLL reinit under all
|
||||
+ * circumstances.
|
||||
+ */
|
||||
+ cur_rate = clk_get_rate(l2_pri_mux_clk);
|
||||
+ aux_rate = 384000000;
|
||||
+ if (cur_rate == 1) {
|
||||
+ pr_info("L2 @ QSB rate. Forcing new rate.\n");
|
||||
+ cur_rate = aux_rate;
|
||||
+ }
|
||||
+ clk_set_rate(l2_pri_mux_clk, aux_rate);
|
||||
+ clk_set_rate(l2_pri_mux_clk, 2);
|
||||
+ clk_set_rate(l2_pri_mux_clk, cur_rate);
|
||||
+ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
|
||||
+ for_each_possible_cpu(cpu) {
|
||||
+ clk = clks[cpu];
|
||||
+ cur_rate = clk_get_rate(clk);
|
||||
+ if (cur_rate == 1) {
|
||||
+ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
|
||||
+ cur_rate = aux_rate;
|
||||
+ }
|
||||
+
|
||||
+ clk_set_rate(clk, aux_rate);
|
||||
+ clk_set_rate(clk, 2);
|
||||
+ clk_set_rate(clk, cur_rate);
|
||||
+ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
|
||||
+ }
|
||||
+
|
||||
+ of_clk_add_provider(dev->of_node, krait_of_get, clks);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver krait_cc_driver = {
|
||||
+ .probe = krait_cc_probe,
|
||||
+ .driver = {
|
||||
+ .name = "krait-cc",
|
||||
+ .of_match_table = krait_cc_match_table,
|
||||
+ },
|
||||
+};
|
||||
+module_platform_driver(krait_cc_driver);
|
||||
+
|
||||
+MODULE_DESCRIPTION("Krait CPU Clock Driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_ALIAS("platform:krait-cc");
|
||||
@ -0,0 +1,160 @@
|
||||
From patchwork Fri Dec 8 09:42:28 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102057
|
||||
Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:28 +0530
|
||||
|
||||
When the Hfplls are reprogrammed during the rate change,
|
||||
the primary muxes which are sourced from the same hfpll
|
||||
for higher frequencies, needs to be switched to the 'safe
|
||||
secondary mux' as the parent for that small window. This
|
||||
is done by registering a clk notifier for the muxes and
|
||||
switching to the safe parent in the PRE_RATE_CHANGE notifier
|
||||
and back to the original parent in the POST_RATE_CHANGE notifier.
|
||||
|
||||
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
|
||||
---
|
||||
drivers/clk/qcom/clk-krait.c | 2 ++
|
||||
drivers/clk/qcom/clk-krait.h | 3 +++
|
||||
drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
3 files changed, 61 insertions(+)
|
||||
|
||||
--- a/drivers/clk/qcom/clk-krait.c
|
||||
+++ b/drivers/clk/qcom/clk-krait.c
|
||||
@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
|
||||
if (__clk_is_enabled(hw->clk))
|
||||
__krait_mux_set_sel(mux, sel);
|
||||
|
||||
+ mux->reparent = true;
|
||||
+
|
||||
return 0;
|
||||
}
|
||||
|
||||
--- a/drivers/clk/qcom/clk-krait.h
|
||||
+++ b/drivers/clk/qcom/clk-krait.h
|
||||
@@ -23,6 +23,9 @@ struct krait_mux_clk {
|
||||
u32 shift;
|
||||
u32 en_mask;
|
||||
bool lpl;
|
||||
+ u8 safe_sel;
|
||||
+ u8 old_index;
|
||||
+ bool reparent;
|
||||
|
||||
struct clk_hw hw;
|
||||
struct notifier_block clk_nb;
|
||||
--- a/drivers/clk/qcom/krait-cc.c
|
||||
+++ b/drivers/clk/qcom/krait-cc.c
|
||||
@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
|
||||
0,
|
||||
};
|
||||
|
||||
+/*
|
||||
+ * Notifier function for switching the muxes to safe parent
|
||||
+ * while the hfpll is getting reprogrammed.
|
||||
+ */
|
||||
+static int krait_notifier_cb(struct notifier_block *nb,
|
||||
+ unsigned long event,
|
||||
+ void *data)
|
||||
+{
|
||||
+ int ret = 0;
|
||||
+ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk,
|
||||
+ clk_nb);
|
||||
+ /* Switch to safe parent */
|
||||
+ if (event == PRE_RATE_CHANGE) {
|
||||
+ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw);
|
||||
+ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel);
|
||||
+ mux->reparent = false;
|
||||
+ /*
|
||||
+ * By the time POST_RATE_CHANGE notifier is called,
|
||||
+ * clk framework itself would have changed the parent for the new rate.
|
||||
+ * Only otherwise, put back to the old parent.
|
||||
+ */
|
||||
+ } else if (event == POST_RATE_CHANGE) {
|
||||
+ if (!mux->reparent)
|
||||
+ ret = krait_mux_clk_ops.set_parent(&mux->hw,
|
||||
+ mux->old_index);
|
||||
+ }
|
||||
+
|
||||
+ return notifier_from_errno(ret);
|
||||
+}
|
||||
+
|
||||
+static int krait_notifier_register(struct device *dev, struct clk *clk,
|
||||
+ struct krait_mux_clk *mux)
|
||||
+{
|
||||
+ int ret = 0;
|
||||
+
|
||||
+ mux->clk_nb.notifier_call = krait_notifier_cb;
|
||||
+ ret = clk_notifier_register(clk, &mux->clk_nb);
|
||||
+ if (ret)
|
||||
+ dev_err(dev, "failed to register clock notifier: %d\n", ret);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
static int
|
||||
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
|
||||
{
|
||||
@@ -79,6 +122,7 @@ static int
|
||||
krait_add_sec_mux(struct device *dev, int id, const char *s,
|
||||
unsigned int offset, bool unique_aux)
|
||||
{
|
||||
+ int ret;
|
||||
struct krait_mux_clk *mux;
|
||||
static const char *sec_mux_list[] = {
|
||||
"acpu_aux",
|
||||
@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
|
||||
mux->shift = 2;
|
||||
mux->parent_map = sec_mux_map;
|
||||
mux->hw.init = &init;
|
||||
+ mux->safe_sel = 0;
|
||||
|
||||
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
|
||||
if (!init.name)
|
||||
@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
|
||||
|
||||
clk = devm_clk_register(dev, &mux->hw);
|
||||
|
||||
+ ret = krait_notifier_register(dev, clk, mux);
|
||||
+ if (ret)
|
||||
+ goto unique_aux;
|
||||
+
|
||||
+unique_aux:
|
||||
if (unique_aux)
|
||||
kfree(sec_mux_list[0]);
|
||||
err_aux:
|
||||
@@ -128,6 +178,7 @@ static struct clk *
|
||||
krait_add_pri_mux(struct device *dev, int id, const char *s,
|
||||
unsigned int offset)
|
||||
{
|
||||
+ int ret;
|
||||
struct krait_mux_clk *mux;
|
||||
const char *p_names[3];
|
||||
struct clk_init_data init = {
|
||||
@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
|
||||
mux->lpl = id >= 0;
|
||||
mux->parent_map = pri_mux_map;
|
||||
mux->hw.init = &init;
|
||||
+ mux->safe_sel = 2;
|
||||
|
||||
init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
|
||||
if (!init.name)
|
||||
@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
|
||||
|
||||
clk = devm_clk_register(dev, &mux->hw);
|
||||
|
||||
+ ret = krait_notifier_register(dev, clk, mux);
|
||||
+ if (ret)
|
||||
+ goto err_p3;
|
||||
+err_p3:
|
||||
kfree(p_names[2]);
|
||||
err_p2:
|
||||
kfree(p_names[1]);
|
||||
@ -0,0 +1,307 @@
|
||||
From patchwork Fri Dec 8 09:42:29 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,11/12] cpufreq: Add module to register cpufreq on Krait CPUs
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102075
|
||||
Message-Id: <1512726150-7204-12-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:29 +0530
|
||||
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
|
||||
Register a cpufreq-generic device whenever we detect that a
|
||||
"qcom,krait" compatible CPU is present in DT.
|
||||
|
||||
Cc: <devicetree@vger.kernel.org>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++
|
||||
drivers/cpufreq/Kconfig.arm | 9 +
|
||||
drivers/cpufreq/Makefile | 1 +
|
||||
drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++
|
||||
4 files changed, 252 insertions(+)
|
||||
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
|
||||
create mode 100644 drivers/cpufreq/qcom-cpufreq.c
|
||||
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
|
||||
@@ -0,0 +1,38 @@
|
||||
+Qualcomm Process Voltage Scaling Tables
|
||||
+
|
||||
+The node name is required to be "qcom,pvs". There shall only be one
|
||||
+such node present in the root of the tree.
|
||||
+
|
||||
+PROPERTIES
|
||||
+
|
||||
+- qcom,pvs-format-a or qcom,pvs-format-b:
|
||||
+ Usage: required
|
||||
+ Value type: <empty>
|
||||
+ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
|
||||
+ If qcom,pvs-format-a is used the table is two columns
|
||||
+ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage,
|
||||
+ and current in that order).
|
||||
+
|
||||
+- qcom,speedX-pvsY-bin-vZ:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
|
||||
+ and version Z.
|
||||
+Example:
|
||||
+
|
||||
+ qcom,pvs {
|
||||
+ qcom,pvs-format-a;
|
||||
+ qcom,speed0-pvs0-bin-v0 =
|
||||
+ < 384000000 950000 >,
|
||||
+ < 486000000 975000 >,
|
||||
+ < 594000000 1000000 >,
|
||||
+ < 702000000 1025000 >,
|
||||
+ < 810000000 1075000 >,
|
||||
+ < 918000000 1100000 >,
|
||||
+ < 1026000000 1125000 >,
|
||||
+ < 1134000000 1175000 >,
|
||||
+ < 1242000000 1200000 >,
|
||||
+ < 1350000000 1225000 >,
|
||||
+ < 1458000000 1237500 >,
|
||||
+ < 1512000000 1250000 >;
|
||||
+ };
|
||||
--- a/drivers/cpufreq/Kconfig.arm
|
||||
+++ b/drivers/cpufreq/Kconfig.arm
|
||||
@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
|
||||
depends on ARCH_OMAP2PLUS
|
||||
default ARCH_OMAP2PLUS
|
||||
|
||||
+config ARM_QCOM_CPUFREQ
|
||||
+ tristate "Qualcomm based"
|
||||
+ depends on ARCH_QCOM
|
||||
+ select PM_OPP
|
||||
+ help
|
||||
+ This adds the CPUFreq driver for Qualcomm SoC based boards.
|
||||
+
|
||||
+ If in doubt, say N.
|
||||
+
|
||||
config ARM_S3C_CPUFREQ
|
||||
bool
|
||||
help
|
||||
--- a/drivers/cpufreq/Makefile
|
||||
+++ b/drivers/cpufreq/Makefile
|
||||
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt81
|
||||
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
|
||||
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
|
||||
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
|
||||
+obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
|
||||
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
|
||||
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
|
||||
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/cpufreq/qcom-cpufreq.c
|
||||
@@ -0,0 +1,204 @@
|
||||
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/cpu.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/pm_opp.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include "cpufreq-dt.h"
|
||||
+
|
||||
+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
|
||||
+{
|
||||
+ void __iomem *base;
|
||||
+ u32 pte_efuse;
|
||||
+
|
||||
+ *speed = *pvs = *pvs_ver = 0;
|
||||
+
|
||||
+ base = ioremap(0x007000c0, 4);
|
||||
+ if (!base) {
|
||||
+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ pte_efuse = readl_relaxed(base);
|
||||
+ iounmap(base);
|
||||
+
|
||||
+ *speed = pte_efuse & 0xf;
|
||||
+ if (*speed == 0xf)
|
||||
+ *speed = (pte_efuse >> 4) & 0xf;
|
||||
+
|
||||
+ if (*speed == 0xf) {
|
||||
+ *speed = 0;
|
||||
+ pr_warn("Speed bin: Defaulting to %d\n", *speed);
|
||||
+ } else {
|
||||
+ pr_info("Speed bin: %d\n", *speed);
|
||||
+ }
|
||||
+
|
||||
+ *pvs = (pte_efuse >> 10) & 0x7;
|
||||
+ if (*pvs == 0x7)
|
||||
+ *pvs = (pte_efuse >> 13) & 0x7;
|
||||
+
|
||||
+ if (*pvs == 0x7) {
|
||||
+ *pvs = 0;
|
||||
+ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
|
||||
+ } else {
|
||||
+ pr_info("PVS bin: %d\n", *pvs);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
|
||||
+{
|
||||
+ u32 pte_efuse, redundant_sel;
|
||||
+ void __iomem *base;
|
||||
+
|
||||
+ *speed = 0;
|
||||
+ *pvs = 0;
|
||||
+ *pvs_ver = 0;
|
||||
+
|
||||
+ base = ioremap(0xfc4b80b0, 8);
|
||||
+ if (!base) {
|
||||
+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ pte_efuse = readl_relaxed(base);
|
||||
+ redundant_sel = (pte_efuse >> 24) & 0x7;
|
||||
+ *speed = pte_efuse & 0x7;
|
||||
+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
|
||||
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
|
||||
+ *pvs_ver = (pte_efuse >> 4) & 0x3;
|
||||
+
|
||||
+ switch (redundant_sel) {
|
||||
+ case 1:
|
||||
+ *speed = (pte_efuse >> 27) & 0xf;
|
||||
+ break;
|
||||
+ case 2:
|
||||
+ *pvs = (pte_efuse >> 27) & 0xf;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ /* Check SPEED_BIN_BLOW_STATUS */
|
||||
+ if (pte_efuse & BIT(3)) {
|
||||
+ pr_info("Speed bin: %d\n", *speed);
|
||||
+ } else {
|
||||
+ pr_warn("Speed bin not set. Defaulting to 0!\n");
|
||||
+ *speed = 0;
|
||||
+ }
|
||||
+
|
||||
+ /* Check PVS_BLOW_STATUS */
|
||||
+ pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
|
||||
+ if (pte_efuse) {
|
||||
+ pr_info("PVS bin: %d\n", *pvs);
|
||||
+ } else {
|
||||
+ pr_warn("PVS bin not set. Defaulting to 0!\n");
|
||||
+ *pvs = 0;
|
||||
+ }
|
||||
+
|
||||
+ pr_info("PVS version: %d\n", *pvs_ver);
|
||||
+ iounmap(base);
|
||||
+}
|
||||
+
|
||||
+static int __init qcom_cpufreq_populate_opps(void)
|
||||
+{
|
||||
+ int len, rows, cols, i, k, speed, pvs, pvs_ver;
|
||||
+ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
|
||||
+ struct device_node *np;
|
||||
+ struct device *dev;
|
||||
+ int cpu = 0;
|
||||
+
|
||||
+ np = of_find_node_by_name(NULL, "qcom,pvs");
|
||||
+ if (!np)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ if (of_property_read_bool(np, "qcom,pvs-format-a")) {
|
||||
+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
|
||||
+ cols = 2;
|
||||
+ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
|
||||
+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
|
||||
+ cols = 3;
|
||||
+ } else {
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ snprintf(table_name, sizeof(table_name),
|
||||
+ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
|
||||
+
|
||||
+ if (!of_find_property(np, table_name, &len))
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ len /= sizeof(u32);
|
||||
+ if (len % cols || len == 0)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ rows = len / cols;
|
||||
+
|
||||
+ for (i = 0, k = 0; i < rows; i++) {
|
||||
+ u32 freq, volt;
|
||||
+
|
||||
+ of_property_read_u32_index(np, table_name, k++, &freq);
|
||||
+ of_property_read_u32_index(np, table_name, k++, &volt);
|
||||
+ while (k % cols)
|
||||
+ k++; /* Skip uA entries if present */
|
||||
+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
|
||||
+ dev = get_cpu_device(cpu);
|
||||
+ if (!dev)
|
||||
+ return -ENODEV;
|
||||
+ if (dev_pm_opp_add(dev, freq, volt))
|
||||
+ pr_warn("failed to add OPP %u\n", freq);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int __init qcom_cpufreq_driver_init(void)
|
||||
+{
|
||||
+ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
|
||||
+ struct platform_device_info devinfo = {
|
||||
+ .name = "cpufreq-dt",
|
||||
+ .data = &pdata,
|
||||
+ .size_data = sizeof(pdata),
|
||||
+ };
|
||||
+ struct device *cpu_dev;
|
||||
+ struct device_node *np;
|
||||
+ int ret;
|
||||
+
|
||||
+ cpu_dev = get_cpu_device(0);
|
||||
+ if (!cpu_dev)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ np = of_node_get(cpu_dev->of_node);
|
||||
+ if (!np)
|
||||
+ return -ENOENT;
|
||||
+
|
||||
+ if (!of_device_is_compatible(np, "qcom,krait")) {
|
||||
+ of_node_put(np);
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+ of_node_put(np);
|
||||
+
|
||||
+ ret = qcom_cpufreq_populate_opps();
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
|
||||
+}
|
||||
+module_init(qcom_cpufreq_driver_init);
|
||||
+
|
||||
+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
@ -0,0 +1,65 @@
|
||||
From patchwork Fri Dec 8 09:42:30 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v4,12/12] cpufreq: dt: Reintroduce independent_clocks platform data
|
||||
From: Sricharan R <sricharan@codeaurora.org>
|
||||
X-Patchwork-Id: 10102073
|
||||
Message-Id: <1512726150-7204-13-git-send-email-sricharan@codeaurora.org>
|
||||
To: mturquette@baylibre.com, sboyd@codeaurora.org,
|
||||
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
|
||||
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
|
||||
Cc: sricharan@codeaurora.org
|
||||
Date: Fri, 8 Dec 2017 15:12:30 +0530
|
||||
|
||||
The Platform data was removed earlier by,
|
||||
'commit eb96924acddc ("cpufreq: dt: Kill platform-data")'
|
||||
since there were no users at that time.
|
||||
Now this is required when the each of the cpu clocks
|
||||
can be scaled independently, which is the case
|
||||
for krait cores. So reintroduce it.
|
||||
|
||||
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
|
||||
---
|
||||
drivers/cpufreq/cpufreq-dt.c | 7 ++++++-
|
||||
drivers/cpufreq/cpufreq-dt.h | 6 ++++++
|
||||
2 files changed, 12 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/cpufreq/cpufreq-dt.c
|
||||
+++ b/drivers/cpufreq/cpufreq-dt.c
|
||||
@@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p
|
||||
}
|
||||
|
||||
if (fallback) {
|
||||
- cpumask_setall(policy->cpus);
|
||||
+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
|
||||
+
|
||||
+ if (!pd || !pd->independent_clocks)
|
||||
+ cpumask_setall(policy->cpus);
|
||||
|
||||
/*
|
||||
* OPP tables are initialized only for policy->cpu, do it for
|
||||
@@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf
|
||||
if (data && data->have_governor_per_policy)
|
||||
dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
|
||||
|
||||
+ dt_cpufreq_driver.driver_data = data;
|
||||
+
|
||||
ret = cpufreq_register_driver(&dt_cpufreq_driver);
|
||||
if (ret)
|
||||
dev_err(&pdev->dev, "failed register driver: %d\n", ret);
|
||||
--- a/drivers/cpufreq/cpufreq-dt.h
|
||||
+++ b/drivers/cpufreq/cpufreq-dt.h
|
||||
@@ -13,6 +13,12 @@
|
||||
#include <linux/types.h>
|
||||
|
||||
struct cpufreq_dt_platform_data {
|
||||
+ /*
|
||||
+ * True when each CPU has its own clock to control its
|
||||
+ * frequency, false when all CPUs are controlled by a single
|
||||
+ * clock.
|
||||
+ */
|
||||
+ bool independent_clocks;
|
||||
bool have_governor_per_policy;
|
||||
};
|
||||
@ -0,0 +1,72 @@
|
||||
From c7c6a0f50f9ac3620c611ce06ba1f9fafea0444e Mon Sep 17 00:00:00 2001
|
||||
From: Archit Taneja <architt@codeaurora.org>
|
||||
Date: Mon, 3 Aug 2015 10:38:14 +0530
|
||||
Subject: [PATCH 47/69] mtd: nand: Create a BBT flag to access bad block
|
||||
markers in raw mode
|
||||
|
||||
Some controllers can access the factory bad block marker from OOB only
|
||||
when they read it in raw mode. When ECC is enabled, these controllers
|
||||
discard reading/writing bad block markers, preventing access to them
|
||||
altogether.
|
||||
|
||||
The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
|
||||
This results in the nand driver's ecc->read_oob() op to be called, which
|
||||
works with ECC enabled.
|
||||
|
||||
Create a new BBT option flag that tells nand_bbt to force the mode to
|
||||
MTD_OPS_RAW. This would result in the correct op being called for the
|
||||
underlying nand controller driver.
|
||||
|
||||
Reviewed-by: Andy Gross <agross@codeaurora.org>
|
||||
Signed-off-by: Archit Taneja <architt@codeaurora.org>
|
||||
---
|
||||
drivers/mtd/nand/nand_base.c | 6 +++++-
|
||||
drivers/mtd/nand/nand_bbt.c | 6 +++++-
|
||||
include/linux/mtd/bbm.h | 6 ++++++
|
||||
3 files changed, 16 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/mtd/nand/nand_base.c
|
||||
+++ b/drivers/mtd/nand/nand_base.c
|
||||
@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
|
||||
} else {
|
||||
ops.len = ops.ooblen = 1;
|
||||
}
|
||||
- ops.mode = MTD_OPS_PLACE_OOB;
|
||||
+
|
||||
+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
|
||||
+ ops.mode = MTD_OPS_RAW;
|
||||
+ else
|
||||
+ ops.mode = MTD_OPS_PLACE_OOB;
|
||||
|
||||
/* Write to first/last page(s) if necessary */
|
||||
if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
|
||||
--- a/drivers/mtd/nand/nand_bbt.c
|
||||
+++ b/drivers/mtd/nand/nand_bbt.c
|
||||
@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
|
||||
ops.oobbuf = buf;
|
||||
ops.ooboffs = 0;
|
||||
ops.datbuf = NULL;
|
||||
- ops.mode = MTD_OPS_PLACE_OOB;
|
||||
+
|
||||
+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
|
||||
+ ops.mode = MTD_OPS_RAW;
|
||||
+ else
|
||||
+ ops.mode = MTD_OPS_PLACE_OOB;
|
||||
|
||||
for (j = 0; j < numpages; j++) {
|
||||
/*
|
||||
--- a/include/linux/mtd/bbm.h
|
||||
+++ b/include/linux/mtd/bbm.h
|
||||
@@ -116,6 +116,12 @@ struct nand_bbt_descr {
|
||||
#define NAND_BBT_NO_OOB_BBM 0x00080000
|
||||
|
||||
/*
|
||||
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
|
||||
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
|
||||
+ * when in RAW access mode
|
||||
+ */
|
||||
+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000
|
||||
+/*
|
||||
* Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
|
||||
* was allocated dynamicaly and must be freed in nand_release(). Has no meaning
|
||||
* in nand_chip.bbt_options.
|
||||
@ -0,0 +1,26 @@
|
||||
From 5c294df1715d673f94f3b0a6e1ea3a426ca35e6e Mon Sep 17 00:00:00 2001
|
||||
From: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
Date: Thu, 28 Apr 2016 16:20:12 +0300
|
||||
Subject: [PATCH 48/69] PM / OPP: HACK: Allow to set regulator without opp_list
|
||||
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/base/power/opp/core.c | 3 ++-
|
||||
1 file changed, 2 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/base/power/opp/core.c
|
||||
+++ b/drivers/base/power/opp/core.c
|
||||
@@ -1277,11 +1277,13 @@
|
||||
if (!opp_table)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
+#if 0
|
||||
/* This should be called before OPPs are initialized */
|
||||
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
|
||||
ret = -EBUSY;
|
||||
goto err;
|
||||
}
|
||||
+#endif
|
||||
|
||||
/* Already have regulators set */
|
||||
if (opp_table->regulators) {
|
||||
@ -0,0 +1,147 @@
|
||||
From c949f08cf20fe82971fbdb4015daa38210da492e Mon Sep 17 00:00:00 2001
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
Date: Fri, 18 Sep 2015 17:52:06 -0700
|
||||
Subject: [PATCH 49/69] PM / OPP: Support adjusting OPP voltages at runtime
|
||||
|
||||
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
|
||||
employed to optimize the operating voltage of a device. At a
|
||||
given frequency, the hardware monitors dynamic factors and either
|
||||
makes a suggestion for how much to adjust a voltage for the
|
||||
current frequency, or it automatically adjusts the voltage
|
||||
without software intervention. Add an API to the OPP library for
|
||||
the former case, so that AVS type devices can update the voltages
|
||||
for an OPP when the hardware determines the voltage should
|
||||
change. The assumption is that drivers like CPUfreq or devfreq
|
||||
will register for the OPP notifiers and adjust the voltage
|
||||
according to suggestions that AVS makes.
|
||||
|
||||
Cc: Nishanth Menon <nm@ti.com>
|
||||
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++
|
||||
include/linux/pm_opp.h | 11 +++++++
|
||||
2 files changed, 88 insertions(+)
|
||||
|
||||
--- a/drivers/base/power/opp/core.c
|
||||
+++ b/drivers/base/power/opp/core.c
|
||||
@@ -1605,6 +1605,83 @@ unlock:
|
||||
}
|
||||
|
||||
/**
|
||||
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
|
||||
+ * @dev: device for which we do this operation
|
||||
+ * @freq: OPP frequency to adjust voltage of
|
||||
+ * @u_volt: new OPP voltage
|
||||
+ *
|
||||
+ * Change the voltage of an OPP with an RCU operation.
|
||||
+ *
|
||||
+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
|
||||
+ * copy operation, returns 0 if no modifcation was done OR modification was
|
||||
+ * successful.
|
||||
+ *
|
||||
+ * Locking: The internal device_opp and opp structures are RCU protected.
|
||||
+ * Hence this function internally uses RCU updater strategy with mutex locks to
|
||||
+ * keep the integrity of the internal data structures. Callers should ensure
|
||||
+ * that this function is *NOT* called under RCU protection or in contexts where
|
||||
+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
|
||||
+ */
|
||||
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
|
||||
+ unsigned long u_volt)
|
||||
+{
|
||||
+ struct opp_table *opp_table;
|
||||
+ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
|
||||
+ int r = 0;
|
||||
+
|
||||
+ /* keep the node allocated */
|
||||
+ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
|
||||
+ if (!new_opp)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ mutex_lock(&opp_table_lock);
|
||||
+
|
||||
+ /* Find the opp_table */
|
||||
+ opp_table = _find_opp_table(dev);
|
||||
+ if (IS_ERR(opp_table)) {
|
||||
+ r = PTR_ERR(opp_table);
|
||||
+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
|
||||
+ goto unlock;
|
||||
+ }
|
||||
+
|
||||
+ /* Do we have the frequency? */
|
||||
+ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
|
||||
+ if (tmp_opp->rate == freq) {
|
||||
+ opp = tmp_opp;
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+ if (IS_ERR(opp)) {
|
||||
+ r = PTR_ERR(opp);
|
||||
+ goto unlock;
|
||||
+ }
|
||||
+
|
||||
+ /* Is update really needed? */
|
||||
+ if (opp->supplies[0].u_volt == u_volt)
|
||||
+ goto unlock;
|
||||
+ /* copy the old data over */
|
||||
+ *new_opp = *opp;
|
||||
+
|
||||
+ /* plug in new node */
|
||||
+ new_opp->supplies[0].u_volt = u_volt;
|
||||
+
|
||||
+ list_replace(&opp->node, &new_opp->node);
|
||||
+ mutex_unlock(&opp_table_lock);
|
||||
+ kfree(opp);
|
||||
+
|
||||
+ /* Notify the change of the OPP */
|
||||
+ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
|
||||
+ new_opp);
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+unlock:
|
||||
+ mutex_unlock(&opp_table_lock);
|
||||
+ kfree(new_opp);
|
||||
+ return r;
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
* dev_pm_opp_enable() - Enable a specific OPP
|
||||
* @dev: device for which we do this operation
|
||||
* @freq: OPP frequency to enable
|
||||
--- a/include/linux/pm_opp.h
|
||||
+++ b/include/linux/pm_opp.h
|
||||
@@ -25,6 +25,7 @@ struct opp_table;
|
||||
|
||||
enum dev_pm_opp_event {
|
||||
OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
|
||||
+ OPP_EVENT_ADJUST_VOLTAGE,
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
|
||||
unsigned long u_volt);
|
||||
void dev_pm_opp_remove(struct device *dev, unsigned long freq);
|
||||
|
||||
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
|
||||
+ unsigned long u_volt);
|
||||
+
|
||||
int dev_pm_opp_enable(struct device *dev, unsigned long freq);
|
||||
|
||||
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
|
||||
@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
|
||||
{
|
||||
}
|
||||
|
||||
+static inline int
|
||||
+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
|
||||
+ unsigned long u_volt)
|
||||
+{
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
|
||||
{
|
||||
return 0;
|
||||
@ -0,0 +1,51 @@
|
||||
From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001
|
||||
From: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
Date: Thu, 12 May 2016 14:41:33 +0300
|
||||
Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for
|
||||
device
|
||||
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/base/power/opp/core.c | 21 +++++++++++++++++++++
|
||||
include/linux/pm_opp.h | 1 +
|
||||
2 files changed, 22 insertions(+)
|
||||
|
||||
--- a/drivers/base/power/opp/core.c
|
||||
+++ b/drivers/base/power/opp/core.c
|
||||
@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
|
||||
|
||||
+struct regulator *dev_pm_opp_get_regulator(struct device *dev)
|
||||
+{
|
||||
+ struct opp_table *opp_table;
|
||||
+ struct regulator *reg;
|
||||
+
|
||||
+ rcu_read_lock();
|
||||
+
|
||||
+ opp_table = _find_opp_table(dev);
|
||||
+ if (IS_ERR(opp_table)) {
|
||||
+ rcu_read_unlock();
|
||||
+ return ERR_CAST(opp_table);
|
||||
+ }
|
||||
+
|
||||
+ reg = opp_table->regulators[0];
|
||||
+
|
||||
+ rcu_read_unlock();
|
||||
+
|
||||
+ return reg;
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator);
|
||||
+
|
||||
/**
|
||||
* dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not
|
||||
* @opp: opp for which turbo mode is being verified
|
||||
--- a/include/linux/pm_opp.h
|
||||
+++ b/include/linux/pm_opp.h
|
||||
@@ -85,6 +85,7 @@ enum dev_pm_opp_event {
|
||||
unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
|
||||
|
||||
unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
|
||||
+struct regulator *dev_pm_opp_get_regulator(struct device *dev);
|
||||
|
||||
bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
|
||||
@ -0,0 +1,38 @@
|
||||
From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001
|
||||
From: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
Date: Thu, 25 Aug 2016 18:43:35 +0300
|
||||
Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting
|
||||
the OPP
|
||||
|
||||
When the voltage is adjusted, the voltage tolerance is not updated.
|
||||
This can lead to situations where the voltage min value is greater
|
||||
than the voltage max value. The final result is triggering a BUG()
|
||||
in the regulator core.
|
||||
Fix this by updating the voltage tolerance values too.
|
||||
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/base/power/opp/core.c | 5 +++++
|
||||
1 file changed, 5 insertions(+)
|
||||
|
||||
--- a/drivers/base/power/opp/core.c
|
||||
+++ b/drivers/base/power/opp/core.c
|
||||
@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
|
||||
struct opp_table *opp_table;
|
||||
struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
|
||||
int r = 0;
|
||||
+ unsigned long tol;
|
||||
|
||||
/* keep the node allocated */
|
||||
new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
|
||||
@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
|
||||
|
||||
/* plug in new node */
|
||||
new_opp->supplies[0].u_volt = u_volt;
|
||||
+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
|
||||
+ new_opp->supplies[0].u_volt = u_volt;
|
||||
+ new_opp->supplies[0].u_volt_min = u_volt - tol;
|
||||
+ new_opp->supplies[0].u_volt_max = u_volt + tol;
|
||||
|
||||
list_replace(&opp->node, &new_opp->node);
|
||||
mutex_unlock(&opp_table_lock);
|
||||
@ -0,0 +1,55 @@
|
||||
From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001
|
||||
From: Adrian Panella <ianchi74@outlook.com>
|
||||
Date: Thu, 9 Mar 2017 08:26:54 +0100
|
||||
Subject: [PATCH 53/69] regulator: add smb208 support
|
||||
|
||||
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
|
||||
---
|
||||
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
|
||||
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
|
||||
2 files changed, 13 insertions(+)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
|
||||
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
|
||||
@@ -61,6 +61,7 @@ Regulator nodes are identified by their
|
||||
"qcom,rpm-pm8901-regulators"
|
||||
"qcom,rpm-pm8921-regulators"
|
||||
"qcom,rpm-pm8018-regulators"
|
||||
+ "qcom,rpm-smb208-regulators"
|
||||
|
||||
- vdd_l0_l1_lvs-supply:
|
||||
- vdd_l2_l11_l12-supply:
|
||||
@@ -171,6 +172,9 @@ pm8018:
|
||||
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
|
||||
l12, l14, lvs1
|
||||
|
||||
+smb208:
|
||||
+ s1a, s1b, s2a, s2b
|
||||
+
|
||||
The content of each sub-node is defined by the standard binding for regulators -
|
||||
see regulator.txt - with additional custom properties described below:
|
||||
|
||||
--- a/drivers/regulator/qcom_rpm-regulator.c
|
||||
+++ b/drivers/regulator/qcom_rpm-regulator.c
|
||||
@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
|
||||
{ }
|
||||
};
|
||||
|
||||
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
|
||||
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
|
||||
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
|
||||
+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
|
||||
+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
|
||||
+ { }
|
||||
+};
|
||||
+
|
||||
static const struct of_device_id rpm_of_match[] = {
|
||||
{ .compatible = "qcom,rpm-pm8018-regulators",
|
||||
.data = &rpm_pm8018_regulators },
|
||||
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
|
||||
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
|
||||
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
|
||||
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rpm_of_match);
|
||||
@ -0,0 +1,131 @@
|
||||
From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001
|
||||
From: Stephen Boyd <sboyd@codeaurora.org>
|
||||
Date: Fri, 18 Sep 2015 17:52:08 -0700
|
||||
Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events
|
||||
|
||||
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
|
||||
employed to optimize the operating voltage of a device. At a
|
||||
given frequency, the hardware monitors dynamic factors and either
|
||||
makes a suggestion for how much to adjust a voltage for the
|
||||
current frequency, or it automatically adjusts the voltage
|
||||
without software intervention.
|
||||
|
||||
In the former case, an AVS driver will call
|
||||
dev_pm_opp_modify_voltage() and update the voltage for the
|
||||
particular OPP the CPUs are using. Add an OPP notifier to
|
||||
cpufreq-dt so that we can adjust the voltage of the CPU when AVS
|
||||
updates the OPP.
|
||||
|
||||
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
||||
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++--
|
||||
1 file changed, 65 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/drivers/cpufreq/cpufreq-dt.c
|
||||
+++ b/drivers/cpufreq/cpufreq-dt.c
|
||||
@@ -32,6 +32,9 @@ struct private_data {
|
||||
struct device *cpu_dev;
|
||||
struct thermal_cooling_device *cdev;
|
||||
const char *reg_name;
|
||||
+ struct notifier_block opp_nb;
|
||||
+ struct mutex lock;
|
||||
+ unsigned long opp_freq;
|
||||
};
|
||||
|
||||
static struct freq_attr *cpufreq_dt_attr[] = {
|
||||
@@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr
|
||||
static int set_target(struct cpufreq_policy *policy, unsigned int index)
|
||||
{
|
||||
struct private_data *priv = policy->driver_data;
|
||||
+ int ret;
|
||||
+ unsigned long target_freq = policy->freq_table[index].frequency * 1000;
|
||||
+
|
||||
+ mutex_lock(&priv->lock);
|
||||
+ ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
|
||||
+ if (!ret)
|
||||
+ priv->opp_freq = target_freq;
|
||||
+ mutex_unlock(&priv->lock);
|
||||
|
||||
- return dev_pm_opp_set_rate(priv->cpu_dev,
|
||||
- policy->freq_table[index].frequency * 1000);
|
||||
+ return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
@@ -86,6 +96,39 @@ node_put:
|
||||
return name;
|
||||
}
|
||||
|
||||
+static int opp_notifier(struct notifier_block *nb, unsigned long event,
|
||||
+ void *data)
|
||||
+{
|
||||
+ struct dev_pm_opp *opp = data;
|
||||
+ struct private_data *priv = container_of(nb, struct private_data,
|
||||
+ opp_nb);
|
||||
+ struct device *cpu_dev = priv->cpu_dev;
|
||||
+ struct regulator *cpu_reg;
|
||||
+ unsigned long volt, freq;
|
||||
+ int ret = 0;
|
||||
+
|
||||
+ if (event == OPP_EVENT_ADJUST_VOLTAGE) {
|
||||
+ cpu_reg = dev_pm_opp_get_regulator(cpu_dev);
|
||||
+ if (IS_ERR(cpu_reg)) {
|
||||
+ ret = PTR_ERR(cpu_reg);
|
||||
+ goto out;
|
||||
+ }
|
||||
+ volt = dev_pm_opp_get_voltage(opp);
|
||||
+ freq = dev_pm_opp_get_freq(opp);
|
||||
+
|
||||
+ mutex_lock(&priv->lock);
|
||||
+ if (freq == priv->opp_freq) {
|
||||
+ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt);
|
||||
+ }
|
||||
+ mutex_unlock(&priv->lock);
|
||||
+ if (ret)
|
||||
+ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret);
|
||||
+ }
|
||||
+
|
||||
+out:
|
||||
+ return notifier_from_errno(ret);
|
||||
+}
|
||||
+
|
||||
static int resources_available(void)
|
||||
{
|
||||
struct device *cpu_dev;
|
||||
@@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p
|
||||
bool fallback = false;
|
||||
const char *name;
|
||||
int ret;
|
||||
+ struct srcu_notifier_head *opp_srcu_head;
|
||||
|
||||
cpu_dev = get_cpu_device(policy->cpu);
|
||||
if (!cpu_dev) {
|
||||
@@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p
|
||||
goto out_free_opp;
|
||||
}
|
||||
|
||||
+ mutex_init(&priv->lock);
|
||||
+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
|
||||
+
|
||||
priv->reg_name = name;
|
||||
priv->opp_table = opp_table;
|
||||
|
||||
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
|
||||
if (ret) {
|
||||
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
|
||||
- goto out_free_priv;
|
||||
+ goto out_unregister_nb;
|
||||
}
|
||||
|
||||
priv->cpu_dev = cpu_dev;
|
||||
@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p
|
||||
|
||||
out_free_cpufreq_table:
|
||||
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
|
||||
+out_unregister_nb:
|
||||
+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
|
||||
out_free_priv:
|
||||
kfree(priv);
|
||||
out_free_opp:
|
||||
@ -0,0 +1,90 @@
|
||||
From 0759cdff49f1cf361bf503c13f7bcb33da43ab95 Mon Sep 17 00:00:00 2001
|
||||
From: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
Date: Tue, 8 Sep 2015 11:24:41 +0300
|
||||
Subject: [PATCH 55/69] cpufreq-dt: Add L2 frequency scaling support
|
||||
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/cpufreq/cpufreq-dt.c | 41 ++++++++++++++++++++++++++++++++++++++++-
|
||||
include/linux/cpufreq.h | 2 ++
|
||||
2 files changed, 42 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/cpufreq/cpufreq-dt.c
|
||||
+++ b/drivers/cpufreq/cpufreq-dt.c
|
||||
@@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol
|
||||
struct private_data *priv = policy->driver_data;
|
||||
int ret;
|
||||
unsigned long target_freq = policy->freq_table[index].frequency * 1000;
|
||||
+ struct clk *l2_clk = policy->l2_clk;
|
||||
+ unsigned int l2_freq;
|
||||
+ unsigned long new_l2_freq = 0;
|
||||
|
||||
mutex_lock(&priv->lock);
|
||||
ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
|
||||
- if (!ret)
|
||||
+
|
||||
+ if (!ret) {
|
||||
+ if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] &&
|
||||
+ policy->l2_rate[2]) {
|
||||
+ static unsigned long krait_l2[CONFIG_NR_CPUS] = { };
|
||||
+ int cpu, ret = 0;
|
||||
+
|
||||
+ if (target_freq >= policy->l2_rate[2])
|
||||
+ new_l2_freq = policy->l2_rate[2];
|
||||
+ else if (target_freq >= policy->l2_rate[1])
|
||||
+ new_l2_freq = policy->l2_rate[1];
|
||||
+ else
|
||||
+ new_l2_freq = policy->l2_rate[0];
|
||||
+
|
||||
+ krait_l2[policy->cpu] = new_l2_freq;
|
||||
+ for_each_present_cpu(cpu)
|
||||
+ new_l2_freq = max(new_l2_freq, krait_l2[cpu]);
|
||||
+
|
||||
+ l2_freq = clk_get_rate(l2_clk);
|
||||
+
|
||||
+ if (l2_freq != new_l2_freq) {
|
||||
+ /* scale l2 with the core */
|
||||
+ ret = clk_set_rate(l2_clk, new_l2_freq);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
priv->opp_freq = target_freq;
|
||||
+ }
|
||||
+
|
||||
mutex_unlock(&priv->lock);
|
||||
|
||||
return ret;
|
||||
@@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p
|
||||
const char *name;
|
||||
int ret;
|
||||
struct srcu_notifier_head *opp_srcu_head;
|
||||
+ struct device_node *l2_np;
|
||||
+ struct clk *l2_clk = NULL;
|
||||
|
||||
cpu_dev = get_cpu_device(policy->cpu);
|
||||
if (!cpu_dev) {
|
||||
@@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p
|
||||
|
||||
policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
|
||||
|
||||
+ l2_clk = clk_get(cpu_dev, "l2");
|
||||
+ if (!IS_ERR(l2_clk))
|
||||
+ policy->l2_clk = l2_clk;
|
||||
+ l2_np = of_find_node_by_name(NULL, "qcom,l2");
|
||||
+ if (l2_np)
|
||||
+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
|
||||
+
|
||||
ret = cpufreq_table_validate_and_show(policy, freq_table);
|
||||
if (ret) {
|
||||
dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
|
||||
--- a/include/linux/cpufreq.h
|
||||
+++ b/include/linux/cpufreq.h
|
||||
@@ -73,6 +73,8 @@ struct cpufreq_policy {
|
||||
unsigned int cpu; /* cpu managing this policy, must be online */
|
||||
|
||||
struct clk *clk;
|
||||
+ struct clk *l2_clk; /* L2 clock */
|
||||
+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */
|
||||
struct cpufreq_cpuinfo cpuinfo;/* see above */
|
||||
|
||||
unsigned int min; /* in kHz */
|
||||
@ -0,0 +1,23 @@
|
||||
From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001
|
||||
From: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
Date: Tue, 17 May 2016 16:15:43 +0300
|
||||
Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks
|
||||
|
||||
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
||||
---
|
||||
drivers/cpufreq/cpufreq-dt.c | 2 ++
|
||||
1 file changed, 2 insertions(+)
|
||||
|
||||
--- a/drivers/cpufreq/cpufreq-dt.c
|
||||
+++ b/drivers/cpufreq/cpufreq-dt.c
|
||||
@@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_
|
||||
ret = PTR_ERR(cpu_reg);
|
||||
goto out;
|
||||
}
|
||||
+ rcu_read_lock();
|
||||
volt = dev_pm_opp_get_voltage(opp);
|
||||
freq = dev_pm_opp_get_freq(opp);
|
||||
+ rcu_read_unlock();
|
||||
|
||||
mutex_lock(&priv->lock);
|
||||
if (freq == priv->opp_freq) {
|
||||
@ -0,0 +1,29 @@
|
||||
From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001
|
||||
From: Lina Iyer <lina.iyer@linaro.org>
|
||||
Date: Wed, 25 Mar 2015 14:25:29 -0600
|
||||
Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus
|
||||
|
||||
Define ARM_QCOM_CPUIDLE config item to enable cpuidle support.
|
||||
|
||||
Cc: Stephen Boyd <sboyd@codeaurora.org>
|
||||
Cc: Arnd Bergmann <arnd@arndb.de>
|
||||
Cc: Kevin Hilman <khilman@linaro.org>
|
||||
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
|
||||
---
|
||||
drivers/cpuidle/Kconfig.arm | 7 +++++++
|
||||
1 file changed, 7 insertions(+)
|
||||
|
||||
--- a/drivers/cpuidle/Kconfig.arm
|
||||
+++ b/drivers/cpuidle/Kconfig.arm
|
||||
@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
|
||||
depends on ARCH_MVEBU && !ARM64
|
||||
help
|
||||
Select this to enable cpuidle on Armada 370, 38x and XP processors.
|
||||
+
|
||||
+config ARM_QCOM_CPUIDLE
|
||||
+ bool "CPU Idle Driver for QCOM processors"
|
||||
+ depends on ARCH_QCOM
|
||||
+ select ARM_CPUIDLE
|
||||
+ help
|
||||
+ Select this to enable cpuidle on QCOM processors.
|
||||
@ -0,0 +1,62 @@
|
||||
From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Wed, 29 Apr 2015 15:21:46 -0700
|
||||
Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
|
||||
|
||||
ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
|
||||
on most ARM architectures. This automatically calculate ZRELADDR by
|
||||
masking PHYS_OFFSET with 0xf8000000.
|
||||
|
||||
However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
|
||||
network accelerators, and the bootloader removes this section from the
|
||||
layout passed from the ATAGS (when used).
|
||||
|
||||
For newer bootloader, when DT is used, this is not a problem, we just
|
||||
reserve this memory in the device tree. But if the bootloader doesn't
|
||||
have DT support, then ATAGS have to be used. In this case, the ARM
|
||||
decompressor will position the kernel in this low mem, which will not be
|
||||
in the RAM section mapped by the bootloader, which means the kernel will
|
||||
freeze in the middle of the boot process trying to map the memory.
|
||||
|
||||
As a work around, this patch allows disabling AUTO_ZRELADDR when
|
||||
ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
|
||||
which don't support device-tree, which is the case on certain early
|
||||
IPQ806x based designs.
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/Kconfig | 2 +-
|
||||
arch/arm/Makefile | 2 ++
|
||||
arch/arm/mach-qcom/Makefile.boot | 1 +
|
||||
3 files changed, 4 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/arm/mach-qcom/Makefile.boot
|
||||
|
||||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -341,7 +341,7 @@
|
||||
depends on MMU
|
||||
select ARM_HAS_SG_CHAIN
|
||||
select ARM_PATCH_PHYS_VIRT
|
||||
- select AUTO_ZRELADDR
|
||||
+ select AUTO_ZRELADDR if !ARCH_QCOM
|
||||
select TIMER_OF
|
||||
select COMMON_CLK
|
||||
select GENERIC_CLOCKEVENTS
|
||||
--- a/arch/arm/Makefile
|
||||
+++ b/arch/arm/Makefile
|
||||
@@ -255,9 +255,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
|
||||
else
|
||||
MACHINE :=
|
||||
endif
|
||||
+ifeq ($(CONFIG_ARCH_QCOM),)
|
||||
ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
|
||||
MACHINE :=
|
||||
endif
|
||||
+endif
|
||||
|
||||
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
|
||||
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-qcom/Makefile.boot
|
||||
@@ -0,0 +1 @@
|
||||
+zreladdr-y+= 0x42208000
|
||||
@ -0,0 +1,23 @@
|
||||
From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 09:31:44 +0100
|
||||
Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
drivers/mtd/qcom_smem_part.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
--- a/drivers/mtd/qcom_smem_part.c
|
||||
+++ b/drivers/mtd/qcom_smem_part.c
|
||||
@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
|
||||
m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
|
||||
m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
|
||||
|
||||
+ /* "rootfs" conflicts with OpenWrt auto mounting */
|
||||
+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
|
||||
+ m_part->name = "ubi";
|
||||
+
|
||||
/*
|
||||
* The last SMEM partition may have its size marked as
|
||||
* something like 0xffffffff, which means "until the end of the
|
||||
@ -0,0 +1,25 @@
|
||||
From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001
|
||||
From: Abhishek Sahu <absahu@codeaurora.org>
|
||||
Date: Wed, 18 Nov 2015 12:38:56 +0530
|
||||
Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG
|
||||
|
||||
kernel got hanged while reading from /dev/hwrng at the
|
||||
time of PRNG clock enable
|
||||
|
||||
Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172
|
||||
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
|
||||
---
|
||||
drivers/clk/qcom/gcc-ipq806x.c | 2 ++
|
||||
1 file changed, 2 insertions(+)
|
||||
|
||||
--- a/drivers/clk/qcom/gcc-ipq806x.c
|
||||
+++ b/drivers/clk/qcom/gcc-ipq806x.c
|
||||
@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
|
||||
.parent_map = gcc_pxo_pll8_map,
|
||||
},
|
||||
.clkr = {
|
||||
+ .enable_reg = 0x2e80,
|
||||
+ .enable_mask = BIT(11),
|
||||
.hw.init = &(struct clk_init_data){
|
||||
.name = "prng_src",
|
||||
.parent_names = gcc_pxo_pll8,
|
||||
@ -0,0 +1,627 @@
|
||||
From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001
|
||||
From: Rajith Cherian <rajith@codeaurora.org>
|
||||
Date: Tue, 14 Feb 2017 18:30:43 +0530
|
||||
Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064
|
||||
|
||||
Add TSENS driver template to support IPQ8064.
|
||||
This is a base file copied from tsens-8960.c
|
||||
|
||||
Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7
|
||||
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
|
||||
|
||||
ipq8064: tsens: TSENS driver support for IPQ8064
|
||||
|
||||
Support for IPQ8064 tsens driver. The driver works
|
||||
with the thermal framework. The driver overrides the
|
||||
following fucntionalities:
|
||||
|
||||
1. Get current temperature.
|
||||
2. Get/Set trip temperatures.
|
||||
3. Enabled/Disable trip points.
|
||||
4. ISR for threshold generated interrupt.
|
||||
5. Notify userspace when trip points are hit.
|
||||
|
||||
Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918
|
||||
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/thermal/qcom-tsens.txt | 1 +
|
||||
drivers/thermal/qcom/Makefile | 3 +-
|
||||
drivers/thermal/qcom/tsens-ipq8064.c | 551 +++++++++++++++++++++
|
||||
drivers/thermal/qcom/tsens.c | 3 +
|
||||
drivers/thermal/qcom/tsens.h | 2 +-
|
||||
5 files changed, 558 insertions(+), 2 deletions(-)
|
||||
create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c
|
||||
|
||||
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
|
||||
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
|
||||
@@ -5,6 +5,7 @@ Required properties:
|
||||
- "qcom,msm8916-tsens" : For 8916 Family of SoCs
|
||||
- "qcom,msm8974-tsens" : For 8974 Family of SoCs
|
||||
- "qcom,msm8996-tsens" : For 8996 Family of SoCs
|
||||
+ - "qcom,ipq8064-tsens" : For IPQ8064
|
||||
|
||||
- reg: Address range of the thermal registers
|
||||
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
|
||||
--- a/drivers/thermal/qcom/Makefile
|
||||
+++ b/drivers/thermal/qcom/Makefile
|
||||
@@ -1,2 +1,3 @@
|
||||
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
|
||||
-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
|
||||
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \
|
||||
+ tsens-ipq8064.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/thermal/qcom/tsens-ipq8064.c
|
||||
@@ -0,0 +1,551 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/bitops.h>
|
||||
+#include <linux/regmap.h>
|
||||
+#include <linux/thermal.h>
|
||||
+#include <linux/nvmem-consumer.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include "tsens.h"
|
||||
+
|
||||
+#define CAL_MDEGC 30000
|
||||
+
|
||||
+#define CONFIG_ADDR 0x3640
|
||||
+/* CONFIG_ADDR bitmasks */
|
||||
+#define CONFIG 0x9b
|
||||
+#define CONFIG_MASK 0xf
|
||||
+#define CONFIG_SHIFT 0
|
||||
+
|
||||
+#define STATUS_CNTL_8064 0x3660
|
||||
+#define CNTL_ADDR 0x3620
|
||||
+/* CNTL_ADDR bitmasks */
|
||||
+#define EN BIT(0)
|
||||
+#define SW_RST BIT(1)
|
||||
+#define SENSOR0_EN BIT(3)
|
||||
+#define SLP_CLK_ENA BIT(26)
|
||||
+#define MEASURE_PERIOD 1
|
||||
+#define SENSOR0_SHIFT 3
|
||||
+
|
||||
+/* INT_STATUS_ADDR bitmasks */
|
||||
+#define MIN_STATUS_MASK BIT(0)
|
||||
+#define LOWER_STATUS_CLR BIT(1)
|
||||
+#define UPPER_STATUS_CLR BIT(2)
|
||||
+#define MAX_STATUS_MASK BIT(3)
|
||||
+
|
||||
+#define THRESHOLD_ADDR 0x3624
|
||||
+/* THRESHOLD_ADDR bitmasks */
|
||||
+#define THRESHOLD_MAX_CODE 0x20000
|
||||
+#define THRESHOLD_MIN_CODE 0
|
||||
+#define THRESHOLD_MAX_LIMIT_SHIFT 24
|
||||
+#define THRESHOLD_MIN_LIMIT_SHIFT 16
|
||||
+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
|
||||
+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
|
||||
+#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \
|
||||
+ THRESHOLD_MAX_LIMIT_SHIFT)
|
||||
+#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \
|
||||
+ THRESHOLD_MIN_LIMIT_SHIFT)
|
||||
+#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
|
||||
+ THRESHOLD_UPPER_LIMIT_SHIFT)
|
||||
+#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
|
||||
+ THRESHOLD_LOWER_LIMIT_SHIFT)
|
||||
+
|
||||
+/* Initial temperature threshold values */
|
||||
+#define LOWER_LIMIT_TH 0x9d /* 95C */
|
||||
+#define UPPER_LIMIT_TH 0xa6 /* 105C */
|
||||
+#define MIN_LIMIT_TH 0x0
|
||||
+#define MAX_LIMIT_TH 0xff
|
||||
+
|
||||
+#define S0_STATUS_ADDR 0x3628
|
||||
+#define STATUS_ADDR_OFFSET 2
|
||||
+#define SENSOR_STATUS_SIZE 4
|
||||
+#define INT_STATUS_ADDR 0x363c
|
||||
+#define TRDY_MASK BIT(7)
|
||||
+#define TIMEOUT_US 100
|
||||
+
|
||||
+#define TSENS_EN BIT(0)
|
||||
+#define TSENS_SW_RST BIT(1)
|
||||
+#define TSENS_ADC_CLK_SEL BIT(2)
|
||||
+#define SENSOR0_EN BIT(3)
|
||||
+#define SENSOR1_EN BIT(4)
|
||||
+#define SENSOR2_EN BIT(5)
|
||||
+#define SENSOR3_EN BIT(6)
|
||||
+#define SENSOR4_EN BIT(7)
|
||||
+#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \
|
||||
+ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN)
|
||||
+#define TSENS_8064_SENSOR5_EN BIT(8)
|
||||
+#define TSENS_8064_SENSOR6_EN BIT(9)
|
||||
+#define TSENS_8064_SENSOR7_EN BIT(10)
|
||||
+#define TSENS_8064_SENSOR8_EN BIT(11)
|
||||
+#define TSENS_8064_SENSOR9_EN BIT(12)
|
||||
+#define TSENS_8064_SENSOR10_EN BIT(13)
|
||||
+#define TSENS_8064_SENSORS_EN (SENSORS_EN | \
|
||||
+ TSENS_8064_SENSOR5_EN | \
|
||||
+ TSENS_8064_SENSOR6_EN | \
|
||||
+ TSENS_8064_SENSOR7_EN | \
|
||||
+ TSENS_8064_SENSOR8_EN | \
|
||||
+ TSENS_8064_SENSOR9_EN | \
|
||||
+ TSENS_8064_SENSOR10_EN)
|
||||
+
|
||||
+#define TSENS_8064_SEQ_SENSORS 5
|
||||
+#define TSENS_8064_S4_S5_OFFSET 40
|
||||
+#define TSENS_FACTOR 1
|
||||
+
|
||||
+/* Trips: from very hot to very cold */
|
||||
+enum tsens_trip_type {
|
||||
+ TSENS_TRIP_STAGE3 = 0,
|
||||
+ TSENS_TRIP_STAGE2,
|
||||
+ TSENS_TRIP_STAGE1,
|
||||
+ TSENS_TRIP_STAGE0,
|
||||
+ TSENS_TRIP_NUM,
|
||||
+};
|
||||
+
|
||||
+u32 tsens_8064_slope[] = {
|
||||
+ 1176, 1176, 1154, 1176,
|
||||
+ 1111, 1132, 1132, 1199,
|
||||
+ 1132, 1199, 1132
|
||||
+ };
|
||||
+
|
||||
+/* Temperature on y axis and ADC-code on x-axis */
|
||||
+static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s)
|
||||
+{
|
||||
+ int degcbeforefactor, degc;
|
||||
+
|
||||
+ degcbeforefactor = (adc_code * s->slope) + s->offset;
|
||||
+
|
||||
+ if (degcbeforefactor == 0)
|
||||
+ degc = degcbeforefactor;
|
||||
+ else if (degcbeforefactor > 0)
|
||||
+ degc = (degcbeforefactor + TSENS_FACTOR/2)
|
||||
+ / TSENS_FACTOR;
|
||||
+ else
|
||||
+ degc = (degcbeforefactor - TSENS_FACTOR/2)
|
||||
+ / TSENS_FACTOR;
|
||||
+
|
||||
+ return degc;
|
||||
+}
|
||||
+
|
||||
+static int degC_to_code(int degC, const struct tsens_sensor *s)
|
||||
+{
|
||||
+ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2))
|
||||
+ / s->slope;
|
||||
+
|
||||
+ if (code > THRESHOLD_MAX_CODE)
|
||||
+ code = THRESHOLD_MAX_CODE;
|
||||
+ else if (code < THRESHOLD_MIN_CODE)
|
||||
+ code = THRESHOLD_MIN_CODE;
|
||||
+ return code;
|
||||
+}
|
||||
+
|
||||
+static int suspend_ipq8064(struct tsens_device *tmdev)
|
||||
+{
|
||||
+ int ret;
|
||||
+ unsigned int mask;
|
||||
+ struct regmap *map = tmdev->map;
|
||||
+
|
||||
+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ mask = SLP_CLK_ENA | EN;
|
||||
+
|
||||
+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int resume_ipq8064(struct tsens_device *tmdev)
|
||||
+{
|
||||
+ int ret;
|
||||
+ struct regmap *map = tmdev->map;
|
||||
+
|
||||
+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void notify_uspace_tsens_fn(struct work_struct *work)
|
||||
+{
|
||||
+ struct tsens_sensor *s = container_of(work, struct tsens_sensor,
|
||||
+ notify_work);
|
||||
+
|
||||
+ sysfs_notify(&s->tzd->device.kobj, NULL, "type");
|
||||
+}
|
||||
+
|
||||
+static void tsens_scheduler_fn(struct work_struct *work)
|
||||
+{
|
||||
+ struct tsens_device *tmdev = container_of(work, struct tsens_device,
|
||||
+ tsens_work);
|
||||
+ unsigned int threshold, threshold_low, code, reg, sensor, mask;
|
||||
+ unsigned int sensor_addr;
|
||||
+ bool upper_th_x, lower_th_x;
|
||||
+ int adc_code, ret;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR;
|
||||
+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR);
|
||||
+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK)
|
||||
+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
|
||||
+ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK)
|
||||
+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+ sensor &= (uint32_t) TSENS_8064_SENSORS_EN;
|
||||
+ sensor >>= SENSOR0_SHIFT;
|
||||
+
|
||||
+ /* Constraint: There is only 1 interrupt control register for all
|
||||
+ * 11 temperature sensor. So monitoring more than 1 sensor based
|
||||
+ * on interrupts will yield inconsistent result. To overcome this
|
||||
+ * issue we will monitor only sensor 0 which is the master sensor.
|
||||
+ */
|
||||
+
|
||||
+ /* Skip if the sensor is disabled */
|
||||
+ if (sensor & 1) {
|
||||
+ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+ upper_th_x = code >= threshold;
|
||||
+ lower_th_x = code <= threshold_low;
|
||||
+ if (upper_th_x)
|
||||
+ mask |= UPPER_STATUS_CLR;
|
||||
+ if (lower_th_x)
|
||||
+ mask |= LOWER_STATUS_CLR;
|
||||
+ if (upper_th_x || lower_th_x) {
|
||||
+ /* Notify user space */
|
||||
+ schedule_work(&tmdev->sensor[0].notify_work);
|
||||
+ regmap_read(tmdev->map, sensor_addr, &adc_code);
|
||||
+ pr_debug("Trigger (%d degrees) for sensor %d\n",
|
||||
+ code_to_degC(adc_code, &tmdev->sensor[0]), 0);
|
||||
+ }
|
||||
+ }
|
||||
+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask);
|
||||
+
|
||||
+ /* force memory to sync */
|
||||
+ mb();
|
||||
+}
|
||||
+
|
||||
+static irqreturn_t tsens_isr(int irq, void *data)
|
||||
+{
|
||||
+ struct tsens_device *tmdev = data;
|
||||
+
|
||||
+ schedule_work(&tmdev->tsens_work);
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+static void hw_init(struct tsens_device *tmdev)
|
||||
+{
|
||||
+ int ret;
|
||||
+ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0;
|
||||
+ unsigned int reg_status_cntl = 0;
|
||||
+
|
||||
+ regmap_read(tmdev->map, CNTL_ADDR, ®_cntl);
|
||||
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST);
|
||||
+
|
||||
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18)
|
||||
+ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT);
|
||||
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
|
||||
+ regmap_read(tmdev->map, STATUS_CNTL_8064, ®_status_cntl);
|
||||
+ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR
|
||||
+ | MIN_STATUS_MASK | MAX_STATUS_MASK;
|
||||
+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl);
|
||||
+ reg_cntl |= TSENS_EN;
|
||||
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
|
||||
+
|
||||
+ regmap_read(tmdev->map, CONFIG_ADDR, ®_cfg);
|
||||
+ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT);
|
||||
+ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg);
|
||||
+
|
||||
+ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT)
|
||||
+ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT)
|
||||
+ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT)
|
||||
+ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
|
||||
+
|
||||
+ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr);
|
||||
+
|
||||
+ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr,
|
||||
+ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev);
|
||||
+ if (ret < 0) {
|
||||
+ pr_err("%s: request_irq FAIL: %d\n", __func__, ret);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn);
|
||||
+}
|
||||
+
|
||||
+static int init_ipq8064(struct tsens_device *tmdev)
|
||||
+{
|
||||
+ int ret, i;
|
||||
+ u32 reg_cntl, offset = 0;
|
||||
+
|
||||
+ init_common(tmdev);
|
||||
+ if (!tmdev->map)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ /*
|
||||
+ * The status registers for each sensor are discontiguous
|
||||
+ * because some SoCs have 5 sensors while others have more
|
||||
+ * but the control registers stay in the same place, i.e
|
||||
+ * directly after the first 5 status registers.
|
||||
+ */
|
||||
+ for (i = 0; i < tmdev->num_sensors; i++) {
|
||||
+ if (i >= TSENS_8064_SEQ_SENSORS)
|
||||
+ offset = TSENS_8064_S4_S5_OFFSET;
|
||||
+
|
||||
+ tmdev->sensor[i].status = S0_STATUS_ADDR + offset
|
||||
+ + (i << STATUS_ADDR_OFFSET);
|
||||
+ tmdev->sensor[i].slope = tsens_8064_slope[i];
|
||||
+ INIT_WORK(&tmdev->sensor[i].notify_work,
|
||||
+ notify_uspace_tsens_fn);
|
||||
+ }
|
||||
+
|
||||
+ reg_cntl = SW_RST;
|
||||
+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
|
||||
+ reg_cntl &= ~SW_RST;
|
||||
+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
|
||||
+ CONFIG_MASK, CONFIG);
|
||||
+
|
||||
+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
|
||||
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ reg_cntl |= EN;
|
||||
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int calibrate_ipq8064(struct tsens_device *tmdev)
|
||||
+{
|
||||
+ int i;
|
||||
+ char *data, *data_backup;
|
||||
+
|
||||
+ ssize_t num_read = tmdev->num_sensors;
|
||||
+ struct tsens_sensor *s = tmdev->sensor;
|
||||
+
|
||||
+ data = qfprom_read(tmdev->dev, "calib");
|
||||
+ if (IS_ERR(data)) {
|
||||
+ pr_err("Calibration not found.\n");
|
||||
+ return PTR_ERR(data);
|
||||
+ }
|
||||
+
|
||||
+ data_backup = qfprom_read(tmdev->dev, "calib_backup");
|
||||
+ if (IS_ERR(data_backup)) {
|
||||
+ pr_err("Backup calibration not found.\n");
|
||||
+ return PTR_ERR(data_backup);
|
||||
+ }
|
||||
+
|
||||
+ for (i = 0; i < num_read; i++) {
|
||||
+ s[i].calib_data = readb_relaxed(data + i);
|
||||
+ s[i].calib_data_backup = readb_relaxed(data_backup + i);
|
||||
+
|
||||
+ if (s[i].calib_data_backup)
|
||||
+ s[i].calib_data = s[i].calib_data_backup;
|
||||
+ if (!s[i].calib_data) {
|
||||
+ pr_err("QFPROM TSENS calibration data not present\n");
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+ s[i].slope = tsens_8064_slope[i];
|
||||
+ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
|
||||
+ }
|
||||
+
|
||||
+ hw_init(tmdev);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp)
|
||||
+{
|
||||
+ int ret;
|
||||
+ u32 code, trdy;
|
||||
+ const struct tsens_sensor *s = &tmdev->sensor[id];
|
||||
+ unsigned long timeout;
|
||||
+
|
||||
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
|
||||
+ do {
|
||||
+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ if (!(trdy & TRDY_MASK))
|
||||
+ continue;
|
||||
+ ret = regmap_read(tmdev->map, s->status, &code);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ *temp = code_to_degC(code, s);
|
||||
+ return 0;
|
||||
+ } while (time_before(jiffies, timeout));
|
||||
+
|
||||
+ return -ETIMEDOUT;
|
||||
+}
|
||||
+
|
||||
+static int set_trip_temp_ipq8064(void *data, int trip, int temp)
|
||||
+{
|
||||
+ unsigned int reg_th, reg_cntl;
|
||||
+ int ret, code, code_chk, hi_code, lo_code;
|
||||
+ const struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
+
|
||||
+ code_chk = code = degC_to_code(temp, s);
|
||||
+
|
||||
+ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, ®_th);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
|
||||
+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
|
||||
+ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
|
||||
+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
|
||||
+
|
||||
+ switch (trip) {
|
||||
+ case TSENS_TRIP_STAGE3:
|
||||
+ code <<= THRESHOLD_MAX_LIMIT_SHIFT;
|
||||
+ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE2:
|
||||
+ if (code_chk <= lo_code)
|
||||
+ return -EINVAL;
|
||||
+ code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
|
||||
+ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE1:
|
||||
+ if (code_chk >= hi_code)
|
||||
+ return -EINVAL;
|
||||
+ code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
|
||||
+ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE0:
|
||||
+ code <<= THRESHOLD_MIN_LIMIT_SHIFT;
|
||||
+ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
|
||||
+ break;
|
||||
+ default:
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int set_trip_activate_ipq8064(void *data, int trip,
|
||||
+ enum thermal_trip_activation_mode mode)
|
||||
+{
|
||||
+ unsigned int reg_cntl, mask, val;
|
||||
+ const struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
+ int ret;
|
||||
+
|
||||
+ if (!tmdev || trip < 0)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ switch (trip) {
|
||||
+ case TSENS_TRIP_STAGE3:
|
||||
+ mask = MAX_STATUS_MASK;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE2:
|
||||
+ mask = UPPER_STATUS_CLR;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE1:
|
||||
+ mask = LOWER_STATUS_CLR;
|
||||
+ break;
|
||||
+ case TSENS_TRIP_STAGE0:
|
||||
+ mask = MIN_STATUS_MASK;
|
||||
+ break;
|
||||
+ default:
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
|
||||
+ val = reg_cntl | mask;
|
||||
+ else
|
||||
+ val = reg_cntl & ~mask;
|
||||
+
|
||||
+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ /* force memory to sync */
|
||||
+ mb();
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+const struct tsens_ops ops_ipq8064 = {
|
||||
+ .init = init_ipq8064,
|
||||
+ .calibrate = calibrate_ipq8064,
|
||||
+ .get_temp = get_temp_ipq8064,
|
||||
+ .suspend = suspend_ipq8064,
|
||||
+ .resume = resume_ipq8064,
|
||||
+ .set_trip_temp = set_trip_temp_ipq8064,
|
||||
+ .set_trip_activate = set_trip_activate_ipq8064,
|
||||
+};
|
||||
+
|
||||
+const struct tsens_data data_ipq8064 = {
|
||||
+ .num_sensors = 11,
|
||||
+ .ops = &ops_ipq8064,
|
||||
+};
|
||||
--- a/drivers/thermal/qcom/tsens.c
|
||||
+++ b/drivers/thermal/qcom/tsens.c
|
||||
@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
|
||||
}, {
|
||||
.compatible = "qcom,msm8996-tsens",
|
||||
.data = &data_8996,
|
||||
+ }, {
|
||||
+ .compatible = "qcom,ipq8064-tsens",
|
||||
+ .data = &data_ipq8064,
|
||||
},
|
||||
{}
|
||||
};
|
||||
--- a/drivers/thermal/qcom/tsens.h
|
||||
+++ b/drivers/thermal/qcom/tsens.h
|
||||
@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
|
||||
int init_common(struct tsens_device *);
|
||||
int get_temp_common(struct tsens_device *, int, int *);
|
||||
|
||||
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
|
||||
+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
|
||||
|
||||
#endif /* __QCOM_TSENS_H__ */
|
||||
@ -0,0 +1,453 @@
|
||||
From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001
|
||||
From: Rajith Cherian <rajith@codeaurora.org>
|
||||
Date: Wed, 1 Feb 2017 19:00:26 +0530
|
||||
Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts
|
||||
|
||||
Provide support for adding configurable high and
|
||||
configurable low trip temperatures. An interrupts is
|
||||
also triggerred when these trip points are hit. The
|
||||
interrupts can be activated or deactivated from sysfs.
|
||||
This functionality is made available only if
|
||||
CONFIG_THERMAL_WRITABLE_TRIPS is defined.
|
||||
|
||||
Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934
|
||||
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
|
||||
---
|
||||
.../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++
|
||||
drivers/thermal/of-thermal.c | 63 ++++++++++++++++++----
|
||||
drivers/thermal/qcom/tsens.c | 43 ++++++++++++---
|
||||
drivers/thermal/qcom/tsens.h | 11 ++++
|
||||
drivers/thermal/thermal_core.c | 44 ++++++++++++++-
|
||||
include/linux/thermal.h | 14 +++++
|
||||
6 files changed, 162 insertions(+), 17 deletions(-)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
|
||||
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
|
||||
@@ -12,11 +12,15 @@ Required properties:
|
||||
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
|
||||
nvmem cells
|
||||
|
||||
+Optional properties:
|
||||
+- interrupts: Interrupt which gets triggered when threshold is hit
|
||||
+
|
||||
Example:
|
||||
tsens: thermal-sensor@900000 {
|
||||
compatible = "qcom,msm8916-tsens";
|
||||
reg = <0x4a8000 0x2000>;
|
||||
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
|
||||
nvmem-cell-names = "caldata", "calsel";
|
||||
+ interrupts = <0 178 0>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
--- a/drivers/thermal/of-thermal.c
|
||||
+++ b/drivers/thermal/of-thermal.c
|
||||
@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (!data->ops->get_temp)
|
||||
+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EINVAL;
|
||||
|
||||
return data->ops->get_temp(data->sensor_data, temp);
|
||||
@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (!data->ops || !data->ops->set_trips)
|
||||
+ if (!data->ops || !data->ops->set_trips
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EINVAL;
|
||||
|
||||
return data->ops->set_trips(data->sensor_data, low, high);
|
||||
@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
+ if (data->mode == THERMAL_DEVICE_DISABLED)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
return data->ops->set_emul_temp(data->sensor_data, temp);
|
||||
}
|
||||
|
||||
@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (!data->ops->get_trend)
|
||||
+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EINVAL;
|
||||
|
||||
return data->ops->get_trend(data->sensor_data, trip, trend);
|
||||
@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
|
||||
mutex_unlock(&tz->lock);
|
||||
|
||||
data->mode = mode;
|
||||
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
|
||||
+
|
||||
+ if (mode == THERMAL_DEVICE_ENABLED)
|
||||
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (trip >= data->ntrips || trip < 0)
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EDOM;
|
||||
|
||||
*type = data->trips[trip].type;
|
||||
@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
|
||||
+ int trip, enum thermal_trip_activation_mode mode)
|
||||
+{
|
||||
+ struct __thermal_zone *data = tz->devdata;
|
||||
+
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
+ return -EDOM;
|
||||
+
|
||||
+ /*
|
||||
+ * The configurable_hi and configurable_lo trip points can be
|
||||
+ * activated and deactivated.
|
||||
+ */
|
||||
+
|
||||
+ if (data->ops->set_trip_activate) {
|
||||
+ int ret;
|
||||
+
|
||||
+ ret = data->ops->set_trip_activate(data->sensor_data,
|
||||
+ trip, mode);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
|
||||
int *temp)
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (trip >= data->ntrips || trip < 0)
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EDOM;
|
||||
|
||||
*temp = data->trips[trip].temperature;
|
||||
@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (trip >= data->ntrips || trip < 0)
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EDOM;
|
||||
|
||||
if (data->ops->set_trip_temp) {
|
||||
@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (trip >= data->ntrips || trip < 0)
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EDOM;
|
||||
|
||||
*hyst = data->trips[trip].hysteresis;
|
||||
@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
|
||||
{
|
||||
struct __thermal_zone *data = tz->devdata;
|
||||
|
||||
- if (trip >= data->ntrips || trip < 0)
|
||||
+ if (trip >= data->ntrips || trip < 0
|
||||
+ || (data->mode == THERMAL_DEVICE_DISABLED))
|
||||
return -EDOM;
|
||||
|
||||
/* thermal framework should take care of data->mask & (1 << trip) */
|
||||
@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
|
||||
if (ops->set_emul_temp)
|
||||
tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
|
||||
|
||||
+ if (ops->set_trip_activate)
|
||||
+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
|
||||
+
|
||||
mutex_unlock(&tzd->lock);
|
||||
|
||||
return tzd;
|
||||
@@ -726,7 +766,10 @@ static const char * const trip_types[] =
|
||||
[THERMAL_TRIP_ACTIVE] = "active",
|
||||
[THERMAL_TRIP_PASSIVE] = "passive",
|
||||
[THERMAL_TRIP_HOT] = "hot",
|
||||
- [THERMAL_TRIP_CRITICAL] = "critical",
|
||||
+ [THERMAL_TRIP_CRITICAL] = "critical_high",
|
||||
+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
|
||||
+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
|
||||
+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
|
||||
};
|
||||
|
||||
/**
|
||||
--- a/drivers/thermal/qcom/tsens.c
|
||||
+++ b/drivers/thermal/qcom/tsens.c
|
||||
@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
|
||||
|
||||
static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
|
||||
{
|
||||
- const struct tsens_sensor *s = p;
|
||||
+ struct tsens_sensor *s = p;
|
||||
struct tsens_device *tmdev = s->tmdev;
|
||||
|
||||
if (tmdev->ops->get_trend)
|
||||
@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
-static int __maybe_unused tsens_suspend(struct device *dev)
|
||||
+static int __maybe_unused tsens_suspend(void *data)
|
||||
{
|
||||
- struct tsens_device *tmdev = dev_get_drvdata(dev);
|
||||
+ struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
|
||||
if (tmdev->ops && tmdev->ops->suspend)
|
||||
return tmdev->ops->suspend(tmdev);
|
||||
@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend
|
||||
return 0;
|
||||
}
|
||||
|
||||
-static int __maybe_unused tsens_resume(struct device *dev)
|
||||
+static int __maybe_unused tsens_resume(void *data)
|
||||
{
|
||||
- struct tsens_device *tmdev = dev_get_drvdata(dev);
|
||||
+ struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
|
||||
if (tmdev->ops && tmdev->ops->resume)
|
||||
return tmdev->ops->resume(tmdev);
|
||||
@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
|
||||
+{
|
||||
+ struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
+
|
||||
+ if (tmdev->ops && tmdev->ops->set_trip_temp)
|
||||
+ return tmdev->ops->set_trip_temp(s, trip, temp);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int __maybe_unused tsens_activate_trip_type(void *data, int trip,
|
||||
+ enum thermal_trip_activation_mode mode)
|
||||
+{
|
||||
+ struct tsens_sensor *s = data;
|
||||
+ struct tsens_device *tmdev = s->tmdev;
|
||||
+
|
||||
+ if (tmdev->ops && tmdev->ops->set_trip_activate)
|
||||
+ return tmdev->ops->set_trip_activate(s, trip, mode);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
|
||||
|
||||
static const struct of_device_id tsens_table[] = {
|
||||
@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
|
||||
static const struct thermal_zone_of_device_ops tsens_of_ops = {
|
||||
.get_temp = tsens_get_temp,
|
||||
.get_trend = tsens_get_trend,
|
||||
+ .set_trip_temp = tsens_set_trip_temp,
|
||||
+ .set_trip_activate = tsens_activate_trip_type,
|
||||
};
|
||||
|
||||
static int tsens_register(struct tsens_device *tmdev)
|
||||
@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
|
||||
if (id)
|
||||
data = id->data;
|
||||
else
|
||||
- data = &data_8960;
|
||||
+ return -EINVAL;
|
||||
|
||||
if (data->num_sensors <= 0) {
|
||||
dev_err(dev, "invalid number of sensors\n");
|
||||
@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
|
||||
tmdev->dev = dev;
|
||||
tmdev->num_sensors = data->num_sensors;
|
||||
tmdev->ops = data->ops;
|
||||
+
|
||||
+ tmdev->tsens_irq = platform_get_irq(pdev, 0);
|
||||
+
|
||||
for (i = 0; i < tmdev->num_sensors; i++) {
|
||||
if (data->hw_ids)
|
||||
tmdev->sensor[i].hw_id = data->hw_ids[i];
|
||||
--- a/drivers/thermal/qcom/tsens.h
|
||||
+++ b/drivers/thermal/qcom/tsens.h
|
||||
@@ -24,9 +24,12 @@ struct tsens_device;
|
||||
struct tsens_sensor {
|
||||
struct tsens_device *tmdev;
|
||||
struct thermal_zone_device *tzd;
|
||||
+ struct work_struct notify_work;
|
||||
int offset;
|
||||
int id;
|
||||
int hw_id;
|
||||
+ int calib_data;
|
||||
+ int calib_data_backup;
|
||||
int slope;
|
||||
u32 status;
|
||||
};
|
||||
@@ -41,6 +44,9 @@ struct tsens_sensor {
|
||||
* @suspend: Function to suspend the tsens device
|
||||
* @resume: Function to resume the tsens device
|
||||
* @get_trend: Function to get the thermal/temp trend
|
||||
+ * @set_trip_temp: Function to set trip temp
|
||||
+ * @get_trip_temp: Function to get trip temp
|
||||
+ * @set_trip_activate: Function to activate trip points
|
||||
*/
|
||||
struct tsens_ops {
|
||||
/* mandatory callbacks */
|
||||
@@ -53,6 +59,9 @@ struct tsens_ops {
|
||||
int (*suspend)(struct tsens_device *);
|
||||
int (*resume)(struct tsens_device *);
|
||||
int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
|
||||
+ int (*set_trip_temp)(void *, int, int);
|
||||
+ int (*set_trip_activate)(void *, int,
|
||||
+ enum thermal_trip_activation_mode);
|
||||
};
|
||||
|
||||
/**
|
||||
@@ -76,11 +85,13 @@ struct tsens_context {
|
||||
struct tsens_device {
|
||||
struct device *dev;
|
||||
u32 num_sensors;
|
||||
+ u32 tsens_irq;
|
||||
struct regmap *map;
|
||||
struct regmap_field *status_field;
|
||||
struct tsens_context ctx;
|
||||
bool trdy;
|
||||
const struct tsens_ops *ops;
|
||||
+ struct work_struct tsens_work;
|
||||
struct tsens_sensor sensor[0];
|
||||
};
|
||||
|
||||
--- a/drivers/thermal/thermal_sysfs.c
|
||||
+++ b/drivers/thermal/thermal_sysfs.c
|
||||
@@ -115,12 +115,48 @@
|
||||
return sprintf(buf, "passive\n");
|
||||
case THERMAL_TRIP_ACTIVE:
|
||||
return sprintf(buf, "active\n");
|
||||
+ case THERMAL_TRIP_CONFIGURABLE_HI:
|
||||
+ return sprintf(buf, "configurable_hi\n");
|
||||
+ case THERMAL_TRIP_CONFIGURABLE_LOW:
|
||||
+ return sprintf(buf, "configurable_low\n");
|
||||
+ case THERMAL_TRIP_CRITICAL_LOW:
|
||||
+ return sprintf(buf, "critical_low\n");
|
||||
default:
|
||||
return sprintf(buf, "unknown\n");
|
||||
}
|
||||
}
|
||||
|
||||
static ssize_t
|
||||
+trip_point_type_activate(struct device *dev, struct device_attribute *attr,
|
||||
+ const char *buf, size_t count)
|
||||
+{
|
||||
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
|
||||
+ int trip, ret;
|
||||
+ char *enabled = "enabled";
|
||||
+ char *disabled = "disabled";
|
||||
+
|
||||
+ if (!tz->ops->set_trip_activate)
|
||||
+ return -EPERM;
|
||||
+
|
||||
+ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ if (!strncmp(buf, enabled, strlen(enabled)))
|
||||
+ ret = tz->ops->set_trip_activate(tz, trip,
|
||||
+ THERMAL_TRIP_ACTIVATION_ENABLED);
|
||||
+ else if (!strncmp(buf, disabled, strlen(disabled)))
|
||||
+ ret = tz->ops->set_trip_activate(tz, trip,
|
||||
+ THERMAL_TRIP_ACTIVATION_DISABLED);
|
||||
+ else
|
||||
+ ret = -EINVAL;
|
||||
+
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ return count;
|
||||
+}
|
||||
+
|
||||
+static ssize_t
|
||||
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
@@ -562,6 +598,12 @@
|
||||
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
|
||||
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
|
||||
|
||||
+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
|
||||
+ tz->trip_type_attrs[indx].attr.store
|
||||
+ = trip_point_type_activate;
|
||||
+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
|
||||
+ }
|
||||
+
|
||||
/* create trip temp attribute */
|
||||
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
|
||||
"trip_point_%d_temp", indx);
|
||||
--- a/include/linux/thermal.h
|
||||
+++ b/include/linux/thermal.h
|
||||
@@ -78,11 +78,19 @@ enum thermal_device_mode {
|
||||
THERMAL_DEVICE_ENABLED,
|
||||
};
|
||||
|
||||
+enum thermal_trip_activation_mode {
|
||||
+ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
|
||||
+ THERMAL_TRIP_ACTIVATION_ENABLED,
|
||||
+};
|
||||
+
|
||||
enum thermal_trip_type {
|
||||
THERMAL_TRIP_ACTIVE = 0,
|
||||
THERMAL_TRIP_PASSIVE,
|
||||
THERMAL_TRIP_HOT,
|
||||
THERMAL_TRIP_CRITICAL,
|
||||
+ THERMAL_TRIP_CONFIGURABLE_HI,
|
||||
+ THERMAL_TRIP_CONFIGURABLE_LOW,
|
||||
+ THERMAL_TRIP_CRITICAL_LOW,
|
||||
};
|
||||
|
||||
enum thermal_trend {
|
||||
@@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
|
||||
enum thermal_trip_type *);
|
||||
int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
|
||||
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
|
||||
+ int (*set_trip_activate) (struct thermal_zone_device *, int,
|
||||
+ enum thermal_trip_activation_mode);
|
||||
int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
|
||||
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
|
||||
int (*get_crit_temp) (struct thermal_zone_device *, int *);
|
||||
@@ -363,6 +373,8 @@ struct thermal_genl_event {
|
||||
* temperature.
|
||||
* @set_trip_temp: a pointer to a function that sets the trip temperature on
|
||||
* hardware.
|
||||
+ * @activate_trip_type: a pointer to a function to enable/disable trip
|
||||
+ * temperature interrupts
|
||||
*/
|
||||
struct thermal_zone_of_device_ops {
|
||||
int (*get_temp)(void *, int *);
|
||||
@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
|
||||
int (*set_trips)(void *, int, int);
|
||||
int (*set_emul_temp)(void *, int);
|
||||
int (*set_trip_temp)(void *, int, int);
|
||||
+ int (*set_trip_activate)(void *, int,
|
||||
+ enum thermal_trip_activation_mode);
|
||||
};
|
||||
|
||||
/**
|
||||
@ -0,0 +1,93 @@
|
||||
From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 09:32:40 +0100
|
||||
Subject: [PATCH 64/69] clk: clk-rpm fixes
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
|
||||
drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++
|
||||
include/dt-bindings/clock/qcom,rpmcc.h | 4 +++
|
||||
3 files changed, 40 insertions(+)
|
||||
|
||||
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
|
||||
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
|
||||
@@ -13,6 +13,7 @@ Required properties :
|
||||
"qcom,rpmcc-msm8916", "qcom,rpmcc"
|
||||
"qcom,rpmcc-msm8974", "qcom,rpmcc"
|
||||
"qcom,rpmcc-apq8064", "qcom,rpmcc"
|
||||
+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
|
||||
|
||||
- #clock-cells : shall contain 1
|
||||
|
||||
--- a/drivers/clk/qcom/clk-rpm.c
|
||||
+++ b/drivers/clk/qcom/clk-rpm.c
|
||||
@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
|
||||
DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
|
||||
DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
|
||||
|
||||
+/* ipq806x */
|
||||
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
|
||||
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
|
||||
+
|
||||
static struct clk_rpm *apq8064_clks[] = {
|
||||
[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
|
||||
[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
|
||||
@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
|
||||
[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
|
||||
};
|
||||
|
||||
+static struct clk_rpm *ipq806x_clks[] = {
|
||||
+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
|
||||
+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
|
||||
+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
|
||||
+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
|
||||
+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
|
||||
+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
|
||||
+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
|
||||
+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
|
||||
+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
|
||||
+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
|
||||
+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
|
||||
+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
|
||||
+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
|
||||
+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
|
||||
+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
|
||||
+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
|
||||
+};
|
||||
+
|
||||
static const struct rpm_clk_desc rpm_clk_apq8064 = {
|
||||
.clks = apq8064_clks,
|
||||
.num_clks = ARRAY_SIZE(apq8064_clks),
|
||||
};
|
||||
|
||||
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
|
||||
+ .clks = ipq806x_clks,
|
||||
+ .num_clks = ARRAY_SIZE(ipq806x_clks),
|
||||
+};
|
||||
+
|
||||
static const struct of_device_id rpm_clk_match_table[] = {
|
||||
{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
|
||||
+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
|
||||
--- a/include/dt-bindings/clock/qcom,rpmcc.h
|
||||
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
|
||||
@@ -37,6 +37,10 @@
|
||||
#define RPM_SYS_FABRIC_A_CLK 19
|
||||
#define RPM_SFPB_CLK 20
|
||||
#define RPM_SFPB_A_CLK 21
|
||||
+#define RPM_NSS_FABRIC_0_CLK 22
|
||||
+#define RPM_NSS_FABRIC_0_A_CLK 23
|
||||
+#define RPM_NSS_FABRIC_1_CLK 24
|
||||
+#define RPM_NSS_FABRIC_1_A_CLK 25
|
||||
|
||||
/* SMD RPM clocks */
|
||||
#define RPM_SMD_XO_CLK_SRC 0
|
||||
@ -0,0 +1,21 @@
|
||||
From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 09:33:32 +0100
|
||||
Subject: [PATCH 65/69] arm: override compiler flags
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
arch/arm/Makefile | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/Makefile
|
||||
+++ b/arch/arm/Makefile
|
||||
@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
|
||||
# macro, but instead defines a whole series of macros which makes
|
||||
# testing for a specific architecture or later rather impossible.
|
||||
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
|
||||
-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
|
||||
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
|
||||
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
|
||||
# Only override the compiler option if ARMv6. The ARMv6K extensions are
|
||||
# always available in ARMv7
|
||||
@ -0,0 +1,166 @@
|
||||
From a37b0c9113647b2120cf1a18cfc46afdb3f1fccc Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 12 Aug 2014 20:49:27 +0200
|
||||
Subject: [PATCH 66/69] GPIO: add named gpio exports
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++++
|
||||
drivers/gpio/gpiolib-sysfs.c | 10 ++++++-
|
||||
include/asm-generic/gpio.h | 6 ++++
|
||||
include/linux/gpio/consumer.h | 8 +++++
|
||||
4 files changed, 91 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/gpio/gpiolib-of.c
|
||||
+++ b/drivers/gpio/gpiolib-of.c
|
||||
@@ -23,6 +23,8 @@
|
||||
#include <linux/pinctrl/pinctrl.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
|
||||
#include "gpiolib.h"
|
||||
|
||||
@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
|
||||
gpiochip_remove_pin_ranges(chip);
|
||||
of_node_put(chip->of_node);
|
||||
}
|
||||
+
|
||||
+static struct of_device_id gpio_export_ids[] = {
|
||||
+ { .compatible = "gpio-export" },
|
||||
+ { /* sentinel */ }
|
||||
+};
|
||||
+
|
||||
+static int __init of_gpio_export_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device_node *np = pdev->dev.of_node;
|
||||
+ struct device_node *cnp;
|
||||
+ u32 val;
|
||||
+ int nb = 0;
|
||||
+
|
||||
+ for_each_child_of_node(np, cnp) {
|
||||
+ const char *name = NULL;
|
||||
+ int gpio;
|
||||
+ bool dmc;
|
||||
+ int max_gpio = 1;
|
||||
+ int i;
|
||||
+
|
||||
+ of_property_read_string(cnp, "gpio-export,name", &name);
|
||||
+
|
||||
+ if (!name)
|
||||
+ max_gpio = of_gpio_count(cnp);
|
||||
+
|
||||
+ for (i = 0; i < max_gpio; i++) {
|
||||
+ unsigned flags = 0;
|
||||
+ enum of_gpio_flags of_flags;
|
||||
+
|
||||
+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
|
||||
+
|
||||
+ if (of_flags == OF_GPIO_ACTIVE_LOW)
|
||||
+ flags |= GPIOF_ACTIVE_LOW;
|
||||
+
|
||||
+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
|
||||
+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
|
||||
+ else
|
||||
+ flags |= GPIOF_IN;
|
||||
+
|
||||
+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
|
||||
+ continue;
|
||||
+
|
||||
+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
|
||||
+ gpio_export_with_name(gpio, dmc, name);
|
||||
+ nb++;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver gpio_export_driver = {
|
||||
+ .driver = {
|
||||
+ .name = "gpio-export",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = of_match_ptr(gpio_export_ids),
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init of_gpio_export_init(void)
|
||||
+{
|
||||
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
|
||||
+}
|
||||
+device_initcall(of_gpio_export_init);
|
||||
--- a/drivers/gpio/gpiolib-sysfs.c
|
||||
+++ b/drivers/gpio/gpiolib-sysfs.c
|
||||
@@ -553,7 +553,7 @@ static struct class gpio_class = {
|
||||
*
|
||||
* Returns zero on success, else an error.
|
||||
*/
|
||||
-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
|
||||
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
|
||||
{
|
||||
struct gpio_chip *chip;
|
||||
struct gpio_device *gdev;
|
||||
@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
|
||||
offset = gpio_chip_hwgpio(desc);
|
||||
if (chip->names && chip->names[offset])
|
||||
ioname = chip->names[offset];
|
||||
+ if (name)
|
||||
+ ioname = name;
|
||||
|
||||
dev = device_create_with_groups(&gpio_class, &gdev->dev,
|
||||
MKDEV(0, 0), data, gpio_groups,
|
||||
@@ -636,6 +638,12 @@ err_unlock:
|
||||
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
|
||||
return status;
|
||||
}
|
||||
+EXPORT_SYMBOL_GPL(__gpiod_export);
|
||||
+
|
||||
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
|
||||
+{
|
||||
+ return __gpiod_export(desc, direction_may_change, NULL);
|
||||
+}
|
||||
EXPORT_SYMBOL_GPL(gpiod_export);
|
||||
|
||||
static int match_export(struct device *dev, const void *desc)
|
||||
--- a/include/asm-generic/gpio.h
|
||||
+++ b/include/asm-generic/gpio.h
|
||||
@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
|
||||
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
|
||||
}
|
||||
|
||||
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
|
||||
+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
|
||||
+{
|
||||
+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
|
||||
+}
|
||||
+
|
||||
static inline int gpio_export_link(struct device *dev, const char *name,
|
||||
unsigned gpio)
|
||||
{
|
||||
--- a/include/linux/gpio/consumer.h
|
||||
+++ b/include/linux/gpio/consumer.h
|
||||
@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get
|
||||
|
||||
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
|
||||
|
||||
+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
|
||||
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
|
||||
int gpiod_export_link(struct device *dev, const char *name,
|
||||
struct gpio_desc *desc);
|
||||
@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
|
||||
|
||||
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
|
||||
|
||||
+static inline int _gpiod_export(struct gpio_desc *desc,
|
||||
+ bool direction_may_change,
|
||||
+ const char *name)
|
||||
+{
|
||||
+ return -ENOSYS;
|
||||
+}
|
||||
+
|
||||
static inline int gpiod_export(struct gpio_desc *desc,
|
||||
bool direction_may_change)
|
||||
{
|
||||
@ -0,0 +1,189 @@
|
||||
From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
|
||||
From: Adrian Panella <ianchi74@outlook.com>
|
||||
Date: Thu, 9 Mar 2017 09:37:17 +0100
|
||||
Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
|
||||
|
||||
The command-line arguments provided by the boot loader will be
|
||||
appended to a new device tree property: bootloader-args.
|
||||
If there is a property "append-rootblock" in DT under /chosen
|
||||
and a root= option in bootloaders command line it will be parsed
|
||||
and added to DT bootargs with the form: <append-rootblock>XX.
|
||||
Only command line ATAG will be processed, the rest of the ATAGs
|
||||
sent by bootloader will be ignored.
|
||||
This is usefull in dual boot systems, to get the current root partition
|
||||
without afecting the rest of the system.
|
||||
|
||||
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
|
||||
---
|
||||
arch/arm/Kconfig | 11 +++++
|
||||
arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
|
||||
init/main.c | 16 ++++++++
|
||||
3 files changed, 98 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/Kconfig
|
||||
+++ b/arch/arm/Kconfig
|
||||
@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
|
||||
The command-line arguments provided by the boot loader will be
|
||||
appended to the the device tree bootargs property.
|
||||
|
||||
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
|
||||
+ bool "Append rootblock parsing bootloader's kernel arguments"
|
||||
+ help
|
||||
+ The command-line arguments provided by the boot loader will be
|
||||
+ appended to a new device tree property: bootloader-args.
|
||||
+ If there is a property "append-rootblock" in DT under /chosen
|
||||
+ and a root= option in bootloaders command line it will be parsed
|
||||
+ and added to DT bootargs with the form: <append-rootblock>XX.
|
||||
+ Only command line ATAG will be processed, the rest of the ATAGs
|
||||
+ sent by bootloader will be ignored.
|
||||
+
|
||||
endchoice
|
||||
|
||||
config CMDLINE
|
||||
--- a/arch/arm/boot/compressed/atags_to_fdt.c
|
||||
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
|
||||
@@ -4,6 +4,8 @@
|
||||
|
||||
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
|
||||
#define do_extend_cmdline 1
|
||||
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
|
||||
+#define do_extend_cmdline 1
|
||||
#else
|
||||
#define do_extend_cmdline 0
|
||||
#endif
|
||||
@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
|
||||
return cell_size;
|
||||
}
|
||||
|
||||
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
|
||||
+
|
||||
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
|
||||
+{
|
||||
+ char *ptr, *end;
|
||||
+ char *root="root=";
|
||||
+ int i, l;
|
||||
+ const char *rootblock;
|
||||
+
|
||||
+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
|
||||
+ ptr = str - 1;
|
||||
+
|
||||
+ do {
|
||||
+ //first find an 'r' at the begining or after a space
|
||||
+ do {
|
||||
+ ptr++;
|
||||
+ ptr = strchr(ptr, 'r');
|
||||
+ if(!ptr) return dest;
|
||||
+
|
||||
+ } while (ptr != str && *(ptr-1) != ' ');
|
||||
+
|
||||
+ //then check for the rest
|
||||
+ for(i = 1; i <= 4; i++)
|
||||
+ if(*(ptr+i) != *(root+i)) break;
|
||||
+
|
||||
+ } while (i != 5);
|
||||
+
|
||||
+ end = strchr(ptr, ' ');
|
||||
+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
|
||||
+
|
||||
+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
|
||||
+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
|
||||
+ ptr = end + 1;
|
||||
+
|
||||
+ /* if append-rootblock property is set use it to append to command line */
|
||||
+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
|
||||
+ if(rootblock != NULL) {
|
||||
+ if(*dest != ' ') {
|
||||
+ *dest = ' ';
|
||||
+ dest++;
|
||||
+ len++;
|
||||
+ }
|
||||
+ if (len + l + i <= COMMAND_LINE_SIZE) {
|
||||
+ memcpy(dest, rootblock, l);
|
||||
+ dest += l - 1;
|
||||
+ memcpy(dest, ptr, i);
|
||||
+ dest += i;
|
||||
+ }
|
||||
+ }
|
||||
+ return dest;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
|
||||
{
|
||||
char cmdline[COMMAND_LINE_SIZE];
|
||||
@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
|
||||
|
||||
/* and append the ATAG_CMDLINE */
|
||||
if (fdt_cmdline) {
|
||||
+
|
||||
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
|
||||
+ //save original bootloader args
|
||||
+ //and append ubi.mtd with root partition number to current cmdline
|
||||
+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
|
||||
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
|
||||
+
|
||||
+#else
|
||||
len = strlen(fdt_cmdline);
|
||||
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
|
||||
*ptr++ = ' ';
|
||||
memcpy(ptr, fdt_cmdline, len);
|
||||
ptr += len;
|
||||
}
|
||||
+#endif
|
||||
}
|
||||
*ptr = '\0';
|
||||
|
||||
@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
|
||||
else
|
||||
setprop_string(fdt, "/chosen", "bootargs",
|
||||
atag->u.cmdline.cmdline);
|
||||
- } else if (atag->hdr.tag == ATAG_MEM) {
|
||||
+ }
|
||||
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
|
||||
+ else if (atag->hdr.tag == ATAG_MEM) {
|
||||
if (memcount >= sizeof(mem_reg_property)/4)
|
||||
continue;
|
||||
if (!atag->u.mem.size)
|
||||
@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
|
||||
setprop(fdt, "/memory", "reg", mem_reg_property,
|
||||
4 * memcount * memsize);
|
||||
}
|
||||
+#else
|
||||
+
|
||||
+ }
|
||||
+#endif
|
||||
|
||||
return fdt_pack(fdt);
|
||||
}
|
||||
--- a/init/main.c
|
||||
+++ b/init/main.c
|
||||
@@ -95,6 +95,10 @@
|
||||
#include <asm/sections.h>
|
||||
#include <asm/cacheflush.h>
|
||||
|
||||
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
|
||||
+#include <linux/of.h>
|
||||
+#endif
|
||||
+
|
||||
static int kernel_init(void *);
|
||||
|
||||
extern void init_IRQ(void);
|
||||
@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
|
||||
page_alloc_init();
|
||||
|
||||
pr_notice("Kernel command line: %s\n", boot_command_line);
|
||||
+
|
||||
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
|
||||
+ //Show bootloader's original command line for reference
|
||||
+ if(of_chosen) {
|
||||
+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
|
||||
+ if(prop)
|
||||
+ pr_notice("Bootloader command line (ignored): %s\n", prop);
|
||||
+ else
|
||||
+ pr_notice("Bootloader command line not present\n");
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
parse_early_param();
|
||||
after_dashes = parse_args("Booting kernel",
|
||||
static_command_line, __start___param,
|
||||
@ -0,0 +1,28 @@
|
||||
From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <john@phrozen.org>
|
||||
Date: Thu, 9 Mar 2017 11:03:18 +0100
|
||||
Subject: [PATCH 69/69] arm: boot: add dts files
|
||||
|
||||
Signed-off-by: John Crispin <john@phrozen.org>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 8 ++++++++
|
||||
1 file changed, 8 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
qcom-ipq4019-ap.dk01.1-c1.dtb \
|
||||
qcom-ipq8064-ap148.dtb \
|
||||
+ qcom-ipq8064-c2600.dtb \
|
||||
+ qcom-ipq8064-d7800.dtb \
|
||||
+ qcom-ipq8064-db149.dtb \
|
||||
+ qcom-ipq8064-ea8500.dtb \
|
||||
+ qcom-ipq8064-r7500.dtb \
|
||||
+ qcom-ipq8064-r7500v2.dtb \
|
||||
+ qcom-ipq8064-wpq864.dtb \
|
||||
+ qcom-ipq8065-nbg6817.dtb \
|
||||
+ qcom-ipq8065-r7800.dtb \
|
||||
qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb \
|
||||
qcom-msm8974-lge-nexus5-hammerhead.dtb \
|
||||
@ -0,0 +1,16 @@
|
||||
Check for SCM availability before attempting to use SPM
|
||||
|
||||
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||
|
||||
--- a/drivers/soc/qcom/spm.c
|
||||
+++ b/drivers/soc/qcom/spm.c
|
||||
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
|
||||
cpumask_t mask;
|
||||
bool use_scm_power_down = false;
|
||||
|
||||
+ if (!qcom_scm_is_available())
|
||||
+ return -EPROBE_DEFER;
|
||||
+
|
||||
for (i = 0; ; i++) {
|
||||
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
|
||||
if (!state_node)
|
||||
@ -0,0 +1,95 @@
|
||||
From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001
|
||||
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
Date: Tue, 19 Jul 2016 18:44:49 +0530
|
||||
Subject: PCI: qcom: Fixed IPQ806x specific clocks
|
||||
|
||||
Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e
|
||||
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++-----
|
||||
1 file changed, 33 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -91,6 +91,8 @@
|
||||
struct clk *iface_clk;
|
||||
struct clk *core_clk;
|
||||
struct clk *phy_clk;
|
||||
+ struct clk *aux_clk;
|
||||
+ struct clk *ref_clk;
|
||||
struct reset_control *pci_reset;
|
||||
struct reset_control *axi_reset;
|
||||
struct reset_control *ahb_reset;
|
||||
@@ -249,6 +251,14 @@
|
||||
if (IS_ERR(res->phy_clk))
|
||||
return PTR_ERR(res->phy_clk);
|
||||
|
||||
+ res->aux_clk = devm_clk_get(dev, "aux");
|
||||
+ if (IS_ERR(res->aux_clk))
|
||||
+ return PTR_ERR(res->aux_clk);
|
||||
+
|
||||
+ res->ref_clk = devm_clk_get(dev, "ref");
|
||||
+ if (IS_ERR(res->ref_clk))
|
||||
+ return PTR_ERR(res->ref_clk);
|
||||
+
|
||||
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
|
||||
if (IS_ERR(res->pci_reset))
|
||||
return PTR_ERR(res->pci_reset);
|
||||
@@ -281,6 +291,8 @@
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
+ clk_disable_unprepare(res->aux_clk);
|
||||
+ clk_disable_unprepare(res->ref_clk);
|
||||
regulator_disable(res->vdda);
|
||||
regulator_disable(res->vdda_phy);
|
||||
regulator_disable(res->vdda_refclk);
|
||||
@@ -324,16 +336,28 @@
|
||||
goto err_assert_ahb;
|
||||
}
|
||||
|
||||
+ ret = clk_prepare_enable(res->core_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable core clock\n");
|
||||
+ goto err_clk_core;
|
||||
+ }
|
||||
+
|
||||
ret = clk_prepare_enable(res->phy_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
goto err_clk_phy;
|
||||
}
|
||||
|
||||
- ret = clk_prepare_enable(res->core_clk);
|
||||
+ ret = clk_prepare_enable(res->aux_clk);
|
||||
if (ret) {
|
||||
- dev_err(dev, "cannot prepare/enable core clock\n");
|
||||
- goto err_clk_core;
|
||||
+ dev_err(dev, "cannot prepare/enable aux clock\n");
|
||||
+ goto err_clk_aux;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->ref_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable ref clock\n");
|
||||
+ goto err_clk_ref;
|
||||
}
|
||||
|
||||
ret = reset_control_deassert(res->ahb_reset);
|
||||
@@ -389,10 +413,14 @@
|
||||
return 0;
|
||||
|
||||
err_deassert_ahb:
|
||||
- clk_disable_unprepare(res->core_clk);
|
||||
-err_clk_core:
|
||||
+ clk_disable_unprepare(res->ref_clk);
|
||||
+err_clk_ref:
|
||||
+ clk_disable_unprepare(res->aux_clk);
|
||||
+err_clk_aux:
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
err_clk_phy:
|
||||
+ clk_disable_unprepare(res->core_clk);
|
||||
+err_clk_core:
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
err_assert_ahb:
|
||||
regulator_disable(res->vdda_phy);
|
||||
@ -0,0 +1,85 @@
|
||||
From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001
|
||||
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
Date: Tue, 19 Jul 2016 18:58:18 +0530
|
||||
Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes
|
||||
|
||||
Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321
|
||||
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++-----
|
||||
1 file changed, 19 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -98,6 +98,7 @@
|
||||
struct reset_control *ahb_reset;
|
||||
struct reset_control *por_reset;
|
||||
struct reset_control *phy_reset;
|
||||
+ struct reset_control *ext_reset;
|
||||
struct regulator *vdda;
|
||||
struct regulator *vdda_phy;
|
||||
struct regulator *vdda_refclk;
|
||||
@@ -275,6 +276,10 @@
|
||||
if (IS_ERR(res->por_reset))
|
||||
return PTR_ERR(res->por_reset);
|
||||
|
||||
+ res->ext_reset = devm_reset_control_get(dev, "ext");
|
||||
+ if (IS_ERR(res->ext_reset))
|
||||
+ return PTR_ERR(res->ext_reset);
|
||||
+
|
||||
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
||||
return PTR_ERR_OR_ZERO(res->phy_reset);
|
||||
}
|
||||
@@ -288,6 +293,7 @@
|
||||
reset_control_assert(res->ahb_reset);
|
||||
reset_control_assert(res->por_reset);
|
||||
reset_control_assert(res->pci_reset);
|
||||
+ reset_control_assert(res->ext_reset);
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
@@ -306,6 +312,12 @@
|
||||
u32 val;
|
||||
int ret;
|
||||
|
||||
+ ret = reset_control_assert(res->ahb_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot assert ahb reset\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
ret = regulator_enable(res->vdda);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot enable vdda regulator\n");
|
||||
@@ -324,16 +336,16 @@
|
||||
goto err_vdda_phy;
|
||||
}
|
||||
|
||||
- ret = reset_control_assert(res->ahb_reset);
|
||||
+ ret = reset_control_deassert(res->ext_reset);
|
||||
if (ret) {
|
||||
- dev_err(dev, "cannot assert ahb reset\n");
|
||||
- goto err_assert_ahb;
|
||||
+ dev_err(dev, "cannot assert ext reset\n");
|
||||
+ goto err_reset_ext;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->iface_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
- goto err_assert_ahb;
|
||||
+ goto err_iface;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->core_clk);
|
||||
@@ -422,7 +434,9 @@
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
err_clk_core:
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
-err_assert_ahb:
|
||||
+err_iface:
|
||||
+ reset_control_assert(res->ext_reset);
|
||||
+err_reset_ext:
|
||||
regulator_disable(res->vdda_phy);
|
||||
err_vdda_phy:
|
||||
regulator_disable(res->vdda_refclk);
|
||||
@ -0,0 +1,126 @@
|
||||
From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
|
||||
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
Date: Tue, 19 Jul 2016 19:58:22 +0530
|
||||
Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
|
||||
|
||||
Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
|
||||
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++-------
|
||||
1 file changed, 53 insertions(+), 9 deletions(-)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -52,7 +52,13 @@
|
||||
#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
|
||||
|
||||
#define PCIE20_PARF_PHY_CTRL 0x40
|
||||
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
|
||||
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
|
||||
+
|
||||
#define PCIE20_PARF_PHY_REFCLK 0x4C
|
||||
+#define REF_SSP_EN BIT(16)
|
||||
+#define REF_USE_PAD BIT(12)
|
||||
+
|
||||
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
||||
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
|
||||
#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
|
||||
@@ -83,6 +89,18 @@
|
||||
#define DBI_RO_WR_EN 1
|
||||
|
||||
#define PERST_DELAY_US 1000
|
||||
+/* PARF registers */
|
||||
+#define PCIE20_PARF_PCS_DEEMPH 0x34
|
||||
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
|
||||
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
|
||||
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
|
||||
+
|
||||
+#define PCIE20_PARF_PCS_SWING 0x38
|
||||
+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
|
||||
+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
|
||||
+
|
||||
+#define PCIE20_PARF_CONFIG_BITS 0x50
|
||||
+#define PHY_RX0_EQ(x) (x << 24)
|
||||
|
||||
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
|
||||
#define SLV_ADDR_SPACE_SZ 0x10000000
|
||||
@@ -102,6 +120,7 @@
|
||||
struct regulator *vdda;
|
||||
struct regulator *vdda_phy;
|
||||
struct regulator *vdda_refclk;
|
||||
+ uint8_t phy_tx0_term_offset;
|
||||
};
|
||||
|
||||
struct qcom_pcie_resources_1_0_0 {
|
||||
@@ -179,6 +198,16 @@
|
||||
|
||||
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
|
||||
|
||||
+static inline void
|
||||
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
|
||||
+{
|
||||
+ u32 val = readl(addr);
|
||||
+
|
||||
+ val &= ~clear_mask;
|
||||
+ val |= set_mask;
|
||||
+ writel(val, addr);
|
||||
+}
|
||||
+
|
||||
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
||||
{
|
||||
gpiod_set_value_cansleep(pcie->reset, 1);
|
||||
@@ -280,6 +309,10 @@
|
||||
if (IS_ERR(res->ext_reset))
|
||||
return PTR_ERR(res->ext_reset);
|
||||
|
||||
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
|
||||
+ &res->phy_tx0_term_offset))
|
||||
+ res->phy_tx0_term_offset = 0;
|
||||
+
|
||||
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
||||
return PTR_ERR_OR_ZERO(res->phy_reset);
|
||||
}
|
||||
@@ -309,7 +342,6 @@
|
||||
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
||||
struct dw_pcie *pci = pcie->pci;
|
||||
struct device *dev = pci->dev;
|
||||
- u32 val;
|
||||
int ret;
|
||||
|
||||
ret = reset_control_assert(res->ahb_reset);
|
||||
@@ -378,15 +410,26 @@
|
||||
goto err_deassert_ahb;
|
||||
}
|
||||
|
||||
- /* enable PCIe clocks and resets */
|
||||
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
||||
- val &= ~BIT(0);
|
||||
- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
||||
-
|
||||
- /* enable external reference clock */
|
||||
- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
||||
- val |= BIT(16);
|
||||
- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
|
||||
+
|
||||
+ /* Set Tx termination offset */
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
|
||||
+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
|
||||
+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
|
||||
+
|
||||
+ /* PARF programming */
|
||||
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
|
||||
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
|
||||
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
|
||||
+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
|
||||
+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
|
||||
+ PCS_SWING_TX_SWING_LOW(0x78),
|
||||
+ pcie->parf + PCIE20_PARF_PCS_SWING);
|
||||
+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
|
||||
+
|
||||
+ /* Enable reference clock */
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
|
||||
+ REF_USE_PAD, REF_SSP_EN);
|
||||
|
||||
ret = reset_control_deassert(res->phy_reset);
|
||||
if (ret) {
|
||||
@ -0,0 +1,114 @@
|
||||
From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
|
||||
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
Date: Tue, 26 Jul 2016 12:28:31 +0530
|
||||
Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
|
||||
|
||||
Resolved PCIE EP detection errors caused due to missing iATU programming.
|
||||
|
||||
Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
|
||||
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 77 insertions(+)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -83,6 +83,30 @@
|
||||
#define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
|
||||
#define PCIE_CAP_LINK1_VAL 0x2FD7F
|
||||
|
||||
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
|
||||
+
|
||||
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
|
||||
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
|
||||
+
|
||||
+#define PCIE20_PLR_IATU_VIEWPORT 0x900
|
||||
+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
|
||||
+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
|
||||
+
|
||||
+#define PCIE20_PLR_IATU_CTRL1 0x904
|
||||
+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
|
||||
+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
|
||||
+
|
||||
+#define PCIE20_PLR_IATU_CTRL2 0x908
|
||||
+#define PCIE20_PLR_IATU_ENABLE BIT(31)
|
||||
+
|
||||
+#define PCIE20_PLR_IATU_LBAR 0x90C
|
||||
+#define PCIE20_PLR_IATU_UBAR 0x910
|
||||
+#define PCIE20_PLR_IATU_LAR 0x914
|
||||
+#define PCIE20_PLR_IATU_LTAR 0x918
|
||||
+#define PCIE20_PLR_IATU_UTAR 0x91c
|
||||
+
|
||||
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
|
||||
+
|
||||
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
|
||||
|
||||
#define PCIE20_MISC_CONTROL_1_REG 0x8BC
|
||||
@@ -251,6 +275,57 @@
|
||||
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
|
||||
}
|
||||
|
||||
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
|
||||
+{
|
||||
+ struct pcie_port *pp = &pcie->pci->pp;
|
||||
+
|
||||
+ /*
|
||||
+ * program and enable address translation region 0 (device config
|
||||
+ * address space); region type config;
|
||||
+ * axi config address range to device config address range
|
||||
+ */
|
||||
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
|
||||
+ PCIE20_PLR_IATU_REGION_INDEX(0),
|
||||
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
|
||||
+
|
||||
+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
|
||||
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
|
||||
+ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
|
||||
+ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
|
||||
+ writel((pp->cfg0_base + pp->cfg0_size - 1),
|
||||
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
|
||||
+ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
|
||||
+ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct pcie_port *pp = &pcie->pci->pp;
|
||||
+
|
||||
+ /*
|
||||
+ * program and enable address translation region 2 (device resource
|
||||
+ * address space); region type memory;
|
||||
+ * axi device bar address range to device bar address range
|
||||
+ */
|
||||
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
|
||||
+ PCIE20_PLR_IATU_REGION_INDEX(2),
|
||||
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
|
||||
+
|
||||
+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
|
||||
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
|
||||
+ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
|
||||
+ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
|
||||
+ writel(pp->mem_base + pp->mem_size - 1,
|
||||
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
|
||||
+ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
|
||||
+ writel(upper_32_bits(pp->mem_bus_addr),
|
||||
+ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
|
||||
+
|
||||
+ /* 256B PCIE buffer setting */
|
||||
+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
|
||||
+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
|
||||
+}
|
||||
+
|
||||
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
||||
@@ -465,6 +538,9 @@
|
||||
writel(CFG_BRIDGE_SB_INIT,
|
||||
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
|
||||
|
||||
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
|
||||
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
|
||||
+
|
||||
return 0;
|
||||
|
||||
err_deassert_ahb:
|
||||
@ -0,0 +1,61 @@
|
||||
From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001
|
||||
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
Date: Wed, 7 Sep 2016 16:44:28 +0530
|
||||
Subject: PCI: qcom: Force GEN1 support
|
||||
|
||||
Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0
|
||||
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 13 +++++++++++++
|
||||
1 file changed, 13 insertions(+)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -129,6 +129,8 @@
|
||||
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
|
||||
#define SLV_ADDR_SPACE_SZ 0x10000000
|
||||
|
||||
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
|
||||
+
|
||||
struct qcom_pcie_resources_2_1_0 {
|
||||
struct clk *iface_clk;
|
||||
struct clk *core_clk;
|
||||
@@ -218,6 +220,7 @@
|
||||
struct phy *phy;
|
||||
struct gpio_desc *reset;
|
||||
struct qcom_pcie_ops *ops;
|
||||
+ uint32_t force_gen1;
|
||||
};
|
||||
|
||||
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
|
||||
@@ -532,6 +535,11 @@
|
||||
|
||||
/* wait for clock acquisition */
|
||||
usleep_range(1000, 1500);
|
||||
+ if (pcie->force_gen1) {
|
||||
+ writel_relaxed((readl_relaxed(
|
||||
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
|
||||
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
|
||||
+ }
|
||||
|
||||
|
||||
/* Set the Max TLP size to 2K, instead of using default of 4K */
|
||||
@@ -1382,6 +1390,8 @@
|
||||
struct dw_pcie *pci;
|
||||
struct qcom_pcie *pcie;
|
||||
int ret;
|
||||
+ uint32_t force_gen1 = 0;
|
||||
+ struct device_node *np = pdev->dev.of_node;
|
||||
|
||||
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
|
||||
if (!pcie)
|
||||
@@ -1403,6 +1413,9 @@
|
||||
if (IS_ERR(pcie->reset))
|
||||
return PTR_ERR(pcie->reset);
|
||||
|
||||
+ of_property_read_u32(np, "force_gen1", &force_gen1);
|
||||
+ pcie->force_gen1 = force_gen1;
|
||||
+
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
|
||||
pcie->parf = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(pcie->parf))
|
||||
@ -0,0 +1,69 @@
|
||||
From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001
|
||||
From: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
|
||||
Date: Thu, 15 Dec 2016 17:38:18 +0530
|
||||
Subject: pcie: Set PCIE MRRS and MPS to 256B
|
||||
|
||||
Set Max Read Request Size and Max Payload Size to 256 bytes,
|
||||
per chip team recommendation.
|
||||
|
||||
Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8
|
||||
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 37 insertions(+)
|
||||
|
||||
(limited to 'drivers/pci/host/pcie-qcom.c')
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -131,6 +131,14 @@
|
||||
|
||||
#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
|
||||
|
||||
+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
|
||||
+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
|
||||
+#define PCIE20_DEV_CAS 0x78
|
||||
+#define PCIE20_MRRS_MASK __mask(14, 12)
|
||||
+#define PCIE20_MRRS(x) __set(x, 14, 12)
|
||||
+#define PCIE20_MPS_MASK __mask(7, 5)
|
||||
+#define PCIE20_MPS(x) __set(x, 7, 5)
|
||||
+
|
||||
struct qcom_pcie_resources_2_1_0 {
|
||||
struct clk *iface_clk;
|
||||
struct clk *core_clk;
|
||||
@@ -1472,6 +1480,35 @@
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static void qcom_pcie_fixup_final(struct pci_dev *dev)
|
||||
+{
|
||||
+ int cap, err;
|
||||
+ u16 ctl, reg_val;
|
||||
+
|
||||
+ cap = pci_pcie_cap(dev);
|
||||
+ if (!cap)
|
||||
+ return;
|
||||
+
|
||||
+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
|
||||
+
|
||||
+ if (err)
|
||||
+ return;
|
||||
+
|
||||
+ reg_val = ctl;
|
||||
+
|
||||
+ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1)
|
||||
+ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1);
|
||||
+
|
||||
+ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1)
|
||||
+ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1);
|
||||
+
|
||||
+ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val);
|
||||
+
|
||||
+ if (err)
|
||||
+ pr_err("pcie config write failed %d\n", err);
|
||||
+}
|
||||
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
|
||||
+
|
||||
static const struct of_device_id qcom_pcie_match[] = {
|
||||
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
|
||||
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
|
||||
@ -0,0 +1,91 @@
|
||||
From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001
|
||||
From: Abhishek Sahu <absahu@codeaurora.org>
|
||||
Date: Thu, 22 Dec 2016 11:18:45 +0530
|
||||
Subject: pcie: qcom: Fixed pcie_phy_clk branch issue
|
||||
|
||||
Following backtraces are observed in PCIe deinit operation.
|
||||
|
||||
Hardware name: Qualcomm (Flattened Device Tree)
|
||||
(unwind_backtrace) from [] (show_stack+0x10/0x14)
|
||||
(show_stack) from [] (dump_stack+0x84/0x98)
|
||||
(dump_stack) from [] (warn_slowpath_common+0x9c/0xb8)
|
||||
(warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
|
||||
(warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120)
|
||||
(clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4)
|
||||
(clk_core_disable) from [] (clk_disable+0x24/0x30)
|
||||
(clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8)
|
||||
(qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8)
|
||||
(qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538)
|
||||
(dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4)
|
||||
|
||||
pcie_phy_clk is generated for PCIe controller itself and the
|
||||
GCC controls its branch operation. This error is coming since
|
||||
the assert operations turn off the parent clock before branch
|
||||
clock. Now this patch moves clk_disable_unprepare before assert
|
||||
operations.
|
||||
|
||||
Similarly, during probe function, the clock branch operation
|
||||
should be done after dessert operation. Currently, it does not
|
||||
generate any error since bootloader enables the pcie_phy_clk
|
||||
but the same error is coming during probe, if bootloader
|
||||
disables pcie_phy_clk.
|
||||
|
||||
Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d
|
||||
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 16 +++++++---------
|
||||
1 file changed, 7 insertions(+), 9 deletions(-)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -407,6 +407,7 @@
|
||||
{
|
||||
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
||||
|
||||
+ clk_disable_unprepare(res->phy_clk);
|
||||
reset_control_assert(res->pci_reset);
|
||||
reset_control_assert(res->axi_reset);
|
||||
reset_control_assert(res->ahb_reset);
|
||||
@@ -415,7 +415,6 @@
|
||||
reset_control_assert(res->ext_reset);
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
- clk_disable_unprepare(res->phy_clk);
|
||||
clk_disable_unprepare(res->aux_clk);
|
||||
clk_disable_unprepare(res->ref_clk);
|
||||
regulator_disable(res->vdda);
|
||||
@@ -472,12 +472,6 @@
|
||||
goto err_clk_core;
|
||||
}
|
||||
|
||||
- ret = clk_prepare_enable(res->phy_clk);
|
||||
- if (ret) {
|
||||
- dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
- goto err_clk_phy;
|
||||
- }
|
||||
-
|
||||
ret = clk_prepare_enable(res->aux_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable aux clock\n");
|
||||
@@ -541,6 +535,12 @@
|
||||
return ret;
|
||||
}
|
||||
|
||||
+ ret = clk_prepare_enable(res->phy_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
+ goto err_deassert_ahb;
|
||||
+ }
|
||||
+
|
||||
/* wait for clock acquisition */
|
||||
usleep_range(1000, 1500);
|
||||
if (pcie->force_gen1) {
|
||||
@@ -566,8 +566,6 @@
|
||||
err_clk_ref:
|
||||
clk_disable_unprepare(res->aux_clk);
|
||||
err_clk_aux:
|
||||
- clk_disable_unprepare(res->phy_clk);
|
||||
-err_clk_phy:
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
err_clk_core:
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
@ -0,0 +1,25 @@
|
||||
From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001
|
||||
From: Abhishek Sahu <absahu@codeaurora.org>
|
||||
Date: Thu, 22 Dec 2016 11:50:49 +0530
|
||||
Subject: pcie: qcom: change duplicate pci reset to phy reset
|
||||
|
||||
The deinit issues reset_control_assert for pci twice and
|
||||
does not contain phy reset.
|
||||
|
||||
Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99
|
||||
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
|
||||
---
|
||||
drivers/pci/host/pcie-qcom.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/pci/dwc/pcie-qcom.c
|
||||
+++ b/drivers/pci/dwc/pcie-qcom.c
|
||||
@@ -408,7 +408,7 @@
|
||||
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
||||
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
- reset_control_assert(res->pci_reset);
|
||||
+ reset_control_assert(res->phy_reset);
|
||||
reset_control_assert(res->axi_reset);
|
||||
reset_control_assert(res->ahb_reset);
|
||||
reset_control_assert(res->por_reset);
|
||||
@ -0,0 +1,12 @@
|
||||
--- a/drivers/firmware/qcom_scm.c
|
||||
+++ b/drivers/firmware/qcom_scm.c
|
||||
@@ -422,6 +422,9 @@
|
||||
{ .compatible = "qcom,scm-msm8996",
|
||||
.data = NULL, /* no clocks */
|
||||
},
|
||||
+ { .compatible = "qcom,scm-ipq806x",
|
||||
+ .data = NULL, /* no clocks */
|
||||
+ },
|
||||
{ .compatible = "qcom,scm",
|
||||
.data = (void *)(SCM_HAS_CORE_CLK
|
||||
| SCM_HAS_IFACE_CLK
|
||||
@ -0,0 +1,183 @@
|
||||
From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001
|
||||
From: Ajay Kishore <akisho@codeaurora.org>
|
||||
Date: Tue, 24 Jan 2017 14:14:16 +0530
|
||||
Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
|
||||
|
||||
For IPQ806x targets, TZ protects the registers that are used to
|
||||
configure the routing of interrupts to a target processor.
|
||||
To resolve this, this patch uses scm call to route GPIO interrupts
|
||||
to application processor. Also the scm call interface is changed.
|
||||
|
||||
Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce
|
||||
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
|
||||
---
|
||||
drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++
|
||||
drivers/firmware/qcom_scm-64.c | 9 +++++++++
|
||||
drivers/firmware/qcom_scm.c | 13 +++++++++++++
|
||||
drivers/firmware/qcom_scm.h | 8 ++++++++
|
||||
drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------
|
||||
include/linux/qcom_scm.h | 3 ++-
|
||||
6 files changed, 77 insertions(+), 7 deletions(-)
|
||||
|
||||
--- a/drivers/firmware/qcom_scm-32.c
|
||||
+++ b/drivers/firmware/qcom_scm-32.c
|
||||
@@ -561,6 +561,24 @@
|
||||
return ret ? : le32_to_cpu(out);
|
||||
}
|
||||
|
||||
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
|
||||
+{
|
||||
+ s32 ret;
|
||||
+
|
||||
+ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
|
||||
+{
|
||||
+ s32 ret;
|
||||
+
|
||||
+ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
|
||||
{
|
||||
struct {
|
||||
--- a/drivers/firmware/qcom_scm-64.c
|
||||
+++ b/drivers/firmware/qcom_scm-64.c
|
||||
@@ -366,6 +366,16 @@
|
||||
return ret ? : res.a1;
|
||||
}
|
||||
|
||||
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
|
||||
+{
|
||||
+ return -ENOTSUPP;
|
||||
+}
|
||||
+
|
||||
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
|
||||
+{
|
||||
+ return -ENOTSUPP;
|
||||
+}
|
||||
+
|
||||
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
|
||||
{
|
||||
struct qcom_scm_desc desc = {0};
|
||||
--- a/drivers/firmware/qcom_scm.c
|
||||
+++ b/drivers/firmware/qcom_scm.c
|
||||
@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
|
||||
return platform_driver_register(&qcom_scm_driver);
|
||||
}
|
||||
subsys_initcall(qcom_scm_init);
|
||||
+
|
||||
+int qcom_scm_pinmux_read(u32 arg1)
|
||||
+{
|
||||
+ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1);
|
||||
+}
|
||||
+EXPORT_SYMBOL(qcom_scm_pinmux_read);
|
||||
+
|
||||
+int qcom_scm_pinmux_write(u32 arg1, u32 arg2)
|
||||
+{
|
||||
+ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE,
|
||||
+ arg1, arg2);
|
||||
+}
|
||||
+EXPORT_SYMBOL(qcom_scm_pinmux_write);
|
||||
--- a/drivers/firmware/qcom_scm.h
|
||||
+++ b/drivers/firmware/qcom_scm.h
|
||||
@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese
|
||||
extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
|
||||
extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
|
||||
|
||||
+#define SCM_IO_READ 1
|
||||
+#define SCM_IO_WRITE 2
|
||||
+#define SCM_SVC_IO_ACCESS 0x5
|
||||
+
|
||||
+s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1);
|
||||
+s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2);
|
||||
+
|
||||
/* common error codes */
|
||||
#define QCOM_SCM_V2_EBUSY -12
|
||||
#define QCOM_SCM_ENOMEM -5
|
||||
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
|
||||
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
|
||||
@@ -30,7 +30,8 @@
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/log2.h>
|
||||
-
|
||||
+#include <linux/qcom_scm.h>
|
||||
+#include <linux/io.h>
|
||||
#include "../core.h"
|
||||
#include "../pinconf.h"
|
||||
#include "pinctrl-msm.h"
|
||||
@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct
|
||||
const struct msm_pingroup *g;
|
||||
unsigned long flags;
|
||||
u32 val;
|
||||
+ u32 addr;
|
||||
+ int ret;
|
||||
+ const __be32 *reg;
|
||||
|
||||
g = &pctrl->soc->groups[d->hwirq];
|
||||
|
||||
@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
|
||||
else
|
||||
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
|
||||
|
||||
+ int ret = of_device_is_compatible(pctrl->dev->of_node,
|
||||
+ "qcom,ipq8064-pinctrl");
|
||||
/* Route interrupts to application cpu */
|
||||
- val = readl(pctrl->regs + g->intr_target_reg);
|
||||
- val &= ~(7 << g->intr_target_bit);
|
||||
- val |= g->intr_target_kpss_val << g->intr_target_bit;
|
||||
- writel(val, pctrl->regs + g->intr_target_reg);
|
||||
+ if (!ret) {
|
||||
+ val = readl(pctrl->regs + g->intr_target_reg);
|
||||
+ val &= ~(7 << g->intr_target_bit);
|
||||
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
|
||||
+ writel(val, pctrl->regs + g->intr_target_reg);
|
||||
+ } else {
|
||||
+ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL);
|
||||
+ if (reg) {
|
||||
+ u32 addr = be32_to_cpup(reg) + g->intr_target_reg;
|
||||
+ val = qcom_scm_pinmux_read(addr);
|
||||
+ __iormb();
|
||||
+
|
||||
+ val &= ~(7 << g->intr_target_bit);
|
||||
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
|
||||
+
|
||||
+ __iowmb();
|
||||
+ ret = qcom_scm_pinmux_write(addr, val);
|
||||
+ if (ret)
|
||||
+ pr_err("\n Routing interrupts to Apps proc failed");
|
||||
+ }
|
||||
+ }
|
||||
|
||||
/* Update configuration for gpio.
|
||||
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
|
||||
@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(msm_pinctrl_remove);
|
||||
-
|
||||
--- a/include/linux/qcom_scm.h
|
||||
+++ b/include/linux/qcom_scm.h
|
||||
@@ -43,6 +43,8 @@
|
||||
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
|
||||
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
|
||||
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
|
||||
+extern s32 qcom_scm_pinmux_read(u32 arg1);
|
||||
+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2);
|
||||
#else
|
||||
static inline
|
||||
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
|
||||
@@ -73,5 +75,7 @@
|
||||
static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
|
||||
static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
|
||||
static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
|
||||
+extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; }
|
||||
+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; }
|
||||
#endif
|
||||
#endif
|
||||
@ -0,0 +1,71 @@
|
||||
From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001
|
||||
From: Vasudevan Murugesan <vmuruges@codeaurora.org>
|
||||
Date: Tue, 21 Jul 2015 10:22:38 +0530
|
||||
Subject: ipq806x: usb: Control USB master reset
|
||||
|
||||
During removal of the glue layer(dwc3-of-simple),
|
||||
USB master reset is set to active and during insertion
|
||||
it is de-activated.
|
||||
|
||||
Change-Id: I537dc810f6cb2a46664ee674840145066432b957
|
||||
Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
|
||||
(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836)
|
||||
---
|
||||
drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++
|
||||
1 file changed, 12 insertions(+)
|
||||
|
||||
(limited to 'drivers/usb/dwc3/dwc3-of-simple.c')
|
||||
|
||||
--- a/drivers/usb/dwc3/dwc3-of-simple.c
|
||||
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
|
||||
@@ -25,6 +25,7 @@
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/clk.h>
|
||||
+#include <linux/reset.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
@@ -33,6 +34,8 @@
|
||||
struct device *dev;
|
||||
struct clk **clks;
|
||||
int num_clocks;
|
||||
+ struct reset_control *mstr_rst_30_0;
|
||||
+ struct reset_control *mstr_rst_30_1;
|
||||
};
|
||||
|
||||
static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
|
||||
@@ -102,6 +105,20 @@
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
+ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
|
||||
+
|
||||
+ if (!IS_ERR(simple->mstr_rst_30_0))
|
||||
+ reset_control_deassert(simple->mstr_rst_30_0);
|
||||
+ else
|
||||
+ dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n");
|
||||
+
|
||||
+ simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst");
|
||||
+
|
||||
+ if (!IS_ERR(simple->mstr_rst_30_1))
|
||||
+ reset_control_deassert(simple->mstr_rst_30_1);
|
||||
+ else
|
||||
+ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
|
||||
+
|
||||
ret = of_platform_populate(np, NULL, NULL, dev);
|
||||
if (ret) {
|
||||
for (i = 0; i < simple->num_clocks; i++) {
|
||||
@@ -130,6 +147,12 @@
|
||||
clk_put(simple->clks[i]);
|
||||
}
|
||||
|
||||
+ if (!IS_ERR(simple->mstr_rst_30_0))
|
||||
+ reset_control_assert(simple->mstr_rst_30_0);
|
||||
+
|
||||
+ if (!IS_ERR(simple->mstr_rst_30_1))
|
||||
+ reset_control_assert(simple->mstr_rst_30_1);
|
||||
+
|
||||
of_platform_depopulate(dev);
|
||||
|
||||
pm_runtime_put_sync(dev);
|
||||
@ -0,0 +1,38 @@
|
||||
From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001
|
||||
From: Christian Lamparter <chunkeey@gmail.com>
|
||||
Date: Mon, 14 Nov 2016 23:49:22 +0100
|
||||
Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip
|
||||
|
||||
This patch adds the W25N01GV NAND to the table of
|
||||
known devices. Without this patch the device gets detected:
|
||||
|
||||
nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
|
||||
nand: Unknown NAND 256MiB 1,8V 8-bit
|
||||
nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16
|
||||
|
||||
Whereas the u-boot identifies it as:
|
||||
spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
|
||||
SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
|
||||
|
||||
Due to the page size discrepancy, it's impossible to attach
|
||||
ubi volumes on the device.
|
||||
|
||||
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
||||
---
|
||||
drivers/mtd/nand/nand_ids.c | 4 ++++
|
||||
include/linux/mtd/nand.h | 1 +
|
||||
2 files changed, 5 insertions(+)
|
||||
|
||||
--- a/drivers/mtd/nand/nand_ids.c
|
||||
+++ b/drivers/mtd/nand/nand_ids.c
|
||||
@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] =
|
||||
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
|
||||
SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
|
||||
NAND_ECC_INFO(40, SZ_1K), 4 },
|
||||
+ {"W25N01GV 1G 3.3V 8-bit",
|
||||
+ { .id = {0xef, 0xaa} },
|
||||
+ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
|
||||
+ 2, 64, NAND_ECC_INFO(1, SZ_512) },
|
||||
|
||||
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
|
||||
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
|
||||
@ -0,0 +1,22 @@
|
||||
Subject: mtd: spi-nor: add mx25l25635f with SECT_4K
|
||||
|
||||
This patch fixes an issue with the creation of the
|
||||
ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f
|
||||
and mx25l25635e support SECT_4K which will set the
|
||||
erase size to 4K. This is used by ubi to calculate
|
||||
VID header offsets. Without this, uboot and linux
|
||||
disagrees about the layout and refuse to attach
|
||||
the ubi volume created by the other.
|
||||
|
||||
---
|
||||
--- a/drivers/mtd/spi-nor/spi-nor.c
|
||||
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
||||
@@ -1023,7 +1023,7 @@
|
||||
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
|
||||
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
|
||||
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
|
||||
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
||||
+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
|
||||
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
|
||||
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
|
||||
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
||||
11026
target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
Normal file
11026
target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,177 @@
|
||||
From: Christian Lamparter <chunkeey@googlemail.com>
|
||||
Subject: SoC: add qualcomm syscon
|
||||
--- a/drivers/soc/qcom/Makefile
|
||||
+++ b/drivers/soc/qcom/Makefile
|
||||
@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
|
||||
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
|
||||
obj-$(CONFIG_QCOM_SMSM) += smsm.o
|
||||
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
|
||||
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
|
||||
--- a/drivers/soc/qcom/Kconfig
|
||||
+++ b/drivers/soc/qcom/Kconfig
|
||||
@@ -78,6 +78,13 @@ config QCOM_SMSM
|
||||
Say yes here to support the Qualcomm Shared Memory State Machine.
|
||||
The state machine is represented by bits in shared memory.
|
||||
|
||||
+config QCOM_TCSR
|
||||
+ tristate "QCOM Top Control and Status Registers"
|
||||
+ depends on ARCH_QCOM
|
||||
+ help
|
||||
+ Say y here to enable TCSR support. The TCSR provides control
|
||||
+ functions for various peripherals.
|
||||
+
|
||||
config QCOM_WCNSS_CTRL
|
||||
tristate "Qualcomm WCNSS control driver"
|
||||
depends on ARCH_QCOM
|
||||
--- /dev/null
|
||||
+++ b/drivers/soc/qcom/qcom_tcsr.c
|
||||
@@ -0,0 +1,98 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License rev 2 and
|
||||
+ * only rev 2 as published by the free Software foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+
|
||||
+#define TCSR_USB_PORT_SEL 0xb0
|
||||
+#define TCSR_USB_HSPHY_CONFIG 0xC
|
||||
+
|
||||
+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0
|
||||
+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf
|
||||
+
|
||||
+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0
|
||||
+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4
|
||||
+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4
|
||||
+
|
||||
+static int tcsr_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct resource *res;
|
||||
+ const struct device_node *node = pdev->dev.of_node;
|
||||
+ void __iomem *base;
|
||||
+ u32 val;
|
||||
+
|
||||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
+ base = devm_ioremap_resource(&pdev->dev, res);
|
||||
+ if (IS_ERR(base))
|
||||
+ return PTR_ERR(base);
|
||||
+
|
||||
+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
|
||||
+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
|
||||
+ writel(val, base + TCSR_USB_PORT_SEL);
|
||||
+ }
|
||||
+
|
||||
+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
|
||||
+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
|
||||
+ writel(val, base + TCSR_USB_HSPHY_CONFIG);
|
||||
+ }
|
||||
+
|
||||
+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
|
||||
+ u32 tmp = 0;
|
||||
+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
|
||||
+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
|
||||
+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
|
||||
+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
|
||||
+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
|
||||
+ }
|
||||
+
|
||||
+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
|
||||
+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
|
||||
+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
|
||||
+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
|
||||
+ }
|
||||
+
|
||||
+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
|
||||
+ dev_info(&pdev->dev,
|
||||
+ "setting wifi_noc_memtype_m0_m2 = %x\n", val);
|
||||
+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static const struct of_device_id tcsr_dt_match[] = {
|
||||
+ { .compatible = "qcom,tcsr", },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
|
||||
+
|
||||
+static struct platform_driver tcsr_driver = {
|
||||
+ .driver = {
|
||||
+ .name = "tcsr",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = tcsr_dt_match,
|
||||
+ },
|
||||
+ .probe = tcsr_probe,
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(tcsr_driver);
|
||||
+
|
||||
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
||||
+MODULE_DESCRIPTION("QCOM TCSR driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
--- /dev/null
|
||||
+++ b/include/dt-bindings/soc/qcom,tcsr.h
|
||||
@@ -0,0 +1,48 @@
|
||||
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
|
||||
+#define __DT_BINDINGS_QCOM_TCSR_H
|
||||
+
|
||||
+#define TCSR_USB_SELECT_USB3_P0 0x1
|
||||
+#define TCSR_USB_SELECT_USB3_P1 0x2
|
||||
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
|
||||
+
|
||||
+/* IPQ40xx HS PHY Mode Select */
|
||||
+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7
|
||||
+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7
|
||||
+
|
||||
+/* IPQ40xx ess interface mode select */
|
||||
+#define TCSR_ESS_PSGMII 0
|
||||
+#define TCSR_ESS_PSGMII_RGMII5 1
|
||||
+#define TCSR_ESS_PSGMII_RMII0 2
|
||||
+#define TCSR_ESS_PSGMII_RMII1 4
|
||||
+#define TCSR_ESS_PSGMII_RMII0_RMII1 6
|
||||
+#define TCSR_ESS_PSGMII_RGMII4 9
|
||||
+
|
||||
+/*
|
||||
+ * IPQ40xx WiFi Global Config
|
||||
+ * Bit 30:AXID_EN
|
||||
+ * Enable AXI master bus Axid translating to confirm all txn submitted by order
|
||||
+ * Bit 24: Use locally generated socslv_wxi_bvalid
|
||||
+ * 1: use locally generate socslv_wxi_bvalid for performance.
|
||||
+ * 0: use SNOC socslv_wxi_bvalid.
|
||||
+ */
|
||||
+#define TCSR_WIFI_GLB_CFG 0x41000000
|
||||
+
|
||||
+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
|
||||
+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222
|
||||
+
|
||||
+/* TCSR A/B REG */
|
||||
+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
|
||||
+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
|
||||
+
|
||||
+#endif
|
||||
Loading…
Reference in New Issue
Block a user