ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-19 19:27:27 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ipq806x: copy kernel 5.4 patches to 5.10

Browse Source 
Copy kernel 5.4 patches and config to 5.10

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
This commit is contained in:
Ansuel Smith 2021-03-01 00:58:57 +01:00 committed by Petr Štetiar
parent 861b82d36a
commit d53be2a2e9
48 changed files with 7939 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

526
target/linux/ipq806x/config-5.10 Normal file
View File

@ -0,0 +1,526 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_AR8216_PHY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_MODULE_PLTS=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_CPUIDLE=y
# CONFIG_ARM_SMMU is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AT803X_PHY=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_GPIO=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
# CONFIG_DWMAC_QCOM_ETHQOS is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PCI=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=100
CONFIG_HZ_100=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IPQ_GCC_4019 is not set
CONFIG_IPQ_GCC_806X=y
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KPSS_XCC=y
CONFIG_KRAITCC=y
CONFIG_KRAIT_CLOCKS=y
CONFIG_KRAIT_L2_ACCESSORS=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_IPQ8064=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_QCOM_RPM=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_IOMMU is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_QCOM_SMEM_PARTS=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=2
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PAGE_POOL=y
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=y
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_UFS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_QCS404 is not set
# CONFIG_PINCTRL_SC7180 is not set
# CONFIG_PINCTRL_SDM660 is not set
# CONFIG_PINCTRL_SDM845 is not set
# CONFIG_PINCTRL_SM8150 is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
# CONFIG_QCOM_A53PLL is not set
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_CLK_RPM=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_IOMMU is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_PDC is not set
CONFIG_QCOM_PM=y
CONFIG_QCOM_QFPROM=y
# CONFIG_QCOM_RMTFS_MEM is not set
CONFIG_QCOM_RPMCC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
# CONFIG_QCOM_SOCINFO is not set
CONFIG_QCOM_TCSR=y
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_WDT=y
# CONFIG_QCS_GCC_404 is not set
# CONFIG_QCS_TURING_404 is not set
# CONFIG_QRTR is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_SDM_CAMCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_660 is not set
# CONFIG_SDM_GCC_845 is not set
# CONFIG_SDM_GPUCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
# CONFIG_SM_GCC_8150 is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
# CONFIG_STMMAC_SELFTESTS is not set
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UCLAMP_TASK is not set
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XXHASH=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y

71
target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch Normal file
View File

@ -0,0 +1,71 @@
From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <twp@codeaurora.org>
Date: Mon, 16 May 2016 17:58:50 -0700
Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
Original patch from Andy Gross.
This patch removes the crci information from the dma
channel property. At least one client device requires
using more than one CRCI value for a channel. This does
not match the current binding and the crci information
needs to be removed.
Instead, the client device will provide this information
via other means.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -4,8 +4,7 @@ Required properties:
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
- denotes CRCI (client rate control interface) flow control assignment.
+- #dma-cells: must be <1>. First cell denotes the channel number.
- clocks: Should contain the core clock and interface clock.
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
2. channel number
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -55,7 +51,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};

966
target/linux/ipq806x/patches-5.10/0002-dmaengine-Add-ADM-driver.patch Normal file
View File

@ -0,0 +1,966 @@
From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <twp@codeaurora.org>
Date: Mon, 16 May 2016 17:58:51 -0700
Subject: [PATCH 02/69] dmaengine: Add ADM driver
Original patch by Andy Gross.
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides flow
control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
drivers/dma/qcom/Kconfig | 10 +
drivers/dma/qcom/Makefile | 1 +
drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 911 insertions(+)
create mode 100644 drivers/dma/qcom/qcom_adm.c
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -28,3 +28,13 @@ config QCOM_HIDMA
(user to kernel, kernel to kernel, etc.). It only supports
memcpy interface. The core is not intended for general
purpose slave DMA.
+
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the Qualcomm ADM DMA controller. This controller
+ provides DMA capabilities for both general purpose and on-chip
+ peripheral devices.
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg
hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
obj-$(CONFIG_QCOM_HIDMA) += hdma.o
hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
--- /dev/null
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -0,0 +1,914 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) (x << 24)
+#define ADM_CI_RANGE_START(x) (x << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K-1)
+#define ADM_MAX_ROWS (SZ_64K-1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst>>4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ dma_addr_t cple_addr;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC);
+ if (!async_desc->cpl)
+ goto free;
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
+ async_desc->dma_len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
+ goto free;
+
+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
+
+ /* init cmd list */
+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+ *cple = ADM_CPLE_LP;
+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
+ DMA_TO_DEVICE);
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+
+free:
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
+ async_desc->dma_len, DMA_TO_DEVICE);
+ kfree(async_desc->cpl);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ struct resource *iores;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk)) {
+ ret = PTR_ERR(adev->iface_clk);
+ goto err_disable_core_clk;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ ret = PTR_ERR(adev->clk_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ ret = PTR_ERR(adev->c0_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ ret = PTR_ERR(adev->c1_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ ret = PTR_ERR(adev->c2_reset);
+ goto err_disable_clks;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");

40
target/linux/ipq806x/patches-5.10/0030-clk-Disable-i2c-device-on-gsbi4.patch Normal file
View File

@ -0,0 +1,40 @@
From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 08:16:10 +0100
Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4
This patch was not annotated and comes from the v4.4 tree.
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -365,7 +365,7 @@ static struct clk_rcg gsbi1_uart_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_PARENT_GATE,
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
},
},
};
@@ -383,7 +383,7 @@ static struct clk_branch gsbi1_uart_clk
},
.num_parents = 1,
.ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
},
};
@@ -961,6 +961,7 @@ static struct clk_branch gsbi1_h_clk = {
.hw.init = &(struct clk_init_data){
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
+ .flags = CLK_IGNORE_UNUSED,
},
},
};

282
target/linux/ipq806x/patches-5.10/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch Normal file
View File

@ -0,0 +1,282 @@
From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 9 Mar 2017 08:18:08 +0100
Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms
On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
used to store partition layout. This new parser can now be used to read
SMEM and use it to register an MTD layout according to its content.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
---
drivers/mtd/parsers/Kconfig | 7 ++
drivers/mtd/parsers/Makefile | 1 +
drivers/mtd/parsers/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/mtd/parsers/qcom_smem_part.c
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -119,6 +119,13 @@ config MTD_PARSER_TRX
This driver will parse TRX header and report at least two partitions:
kernel and rootfs.
+config MTD_QCOM_SMEM_PARTS
+ tristate "QCOM SMEM partitioning support"
+ depends on QCOM_SMEM
+ help
+ This provides partitions parser for QCOM devices using SMEM
+ such as IPQ806x.
+
config MTD_SHARPSL_PARTS
tristate "Sharp SL Series NAND flash partition parser"
depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
--- /dev/null
+++ b/drivers/mtd/parsers/qcom_smem_part.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/soc/qcom/smem.h>
+
+/* Processor/host identifier for the application processor */
+#define SMEM_HOST_APPS 0
+
+/* SMEM items index */
+#define SMEM_AARM_PARTITION_TABLE 9
+#define SMEM_BOOT_FLASH_TYPE 421
+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
+
+/* SMEM Flash types */
+#define SMEM_FLASH_NAND 2
+#define SMEM_FLASH_SPI 6
+
+#define SMEM_PART_NAME_SZ 16
+#define SMEM_PARTS_MAX 32
+
+struct smem_partition {
+ char name[SMEM_PART_NAME_SZ];
+ __le32 start;
+ __le32 size;
+ __le32 attr;
+};
+
+struct smem_partition_table {
+ u8 magic[8];
+ __le32 version;
+ __le32 len;
+ struct smem_partition parts[SMEM_PARTS_MAX];
+};
+
+/* SMEM Magic values in partition table */
+static const u8 SMEM_PTABLE_MAGIC[] = {
+ 0xaa, 0x73, 0xee, 0x55,
+ 0xdb, 0xbd, 0x5e, 0xe3,
+};
+
+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
+{
+ size_t size;
+
+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
+ &size);
+
+ if (IS_ERR(*smem_blksz)) {
+ pr_err("Unable to read flash blksz from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_blksz)) {
+ pr_err("Invalid flash blksz size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
+{
+ size_t size;
+
+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
+ &size);
+
+ if (IS_ERR(*smem_flash_type)) {
+ pr_err("Unable to read flash type from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_flash_type)) {
+ pr_err("Invalid flash type size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
+{
+ size_t size;
+
+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
+ &size);
+
+ if (IS_ERR(*pparts)) {
+ pr_err("Unable to read partition table from SMEM\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static int of_dev_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+static bool is_spi_device(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
+ if (!dev)
+ return false;
+
+ put_device(dev);
+ return true;
+}
+
+static int parse_qcom_smem_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct smem_partition_table *smem_parts;
+ u64 *smem_flash_type, *smem_blksz;
+ struct mtd_partition *mtd_parts;
+ struct device_node *of_node = master->dev.of_node;
+ int i, ret;
+
+ /*
+ * SMEM will only store the partition table of the boot device.
+ * If this is not the boot device, do not return any partition.
+ */
+ ret = qcom_smem_get_flash_type(&smem_flash_type);
+ if (ret < 0)
+ return ret;
+
+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
+ return 0;
+
+ /*
+ * Just for sanity purpose, make sure the block size in SMEM matches the
+ * block size of the MTD device
+ */
+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
+ if (ret < 0)
+ return ret;
+
+ if (*smem_blksz != master->erasesize) {
+ pr_err("SMEM block size differs from MTD block size\n");
+ return -EINVAL;
+ }
+
+ /* Get partition pointer from SMEM */
+ ret = qcom_smem_get_flash_partitions(&smem_parts);
+ if (ret < 0)
+ return ret;
+
+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
+ sizeof(SMEM_PTABLE_MAGIC))) {
+ pr_err("SMEM partition magic invalid\n");
+ return -EINVAL;
+ }
+
+ /* Allocate and populate the mtd structures */
+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
+ GFP_KERNEL);
+ if (!mtd_parts)
+ return -ENOMEM;
+
+ for (i = 0; i < smem_parts->len; i++) {
+ struct smem_partition *s_part = &smem_parts->parts[i];
+ struct mtd_partition *m_part = &mtd_parts[i];
+
+ m_part->name = s_part->name;
+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+
+ /*
+ * The last SMEM partition may have its size marked as
+ * something like 0xffffffff, which means "until the end of the
+ * flash device". In this case, truncate it.
+ */
+ if (m_part->offset + m_part->size > master->size)
+ m_part->size = master->size - m_part->offset;
+ }
+
+ *pparts = mtd_parts;
+
+ return smem_parts->len;
+}
+
+static const struct of_device_id qcom_smem_of_match_table[] = {
+ { .compatible = "qcom,smem" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table);
+
+static struct mtd_part_parser qcom_smem_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_qcom_smem_partitions,
+ .name = "qcom-smem",
+ .of_match_table = qcom_smem_of_match_table,
+};
+
+static int __init qcom_smem_parser_init(void)
+{
+ register_mtd_parser(&qcom_smem_parser);
+ return 0;
+}
+
+static void __exit qcom_smem_parser_exit(void)
+{
+ deregister_mtd_parser(&qcom_smem_parser);
+}
+
+module_init(qcom_smem_parser_init);
+module_exit(qcom_smem_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");

29
target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch Normal file
View File

@ -0,0 +1,29 @@
From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Tue, 21 Apr 2015 19:09:07 -0700
Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is
enabled
If multiple PCIe devices are present in the system, the kernel will
panic at boot time when trying to scan the PCI buses. This happens on
IPQ806x based platforms, which has 3 PCIe ports.
Enabling this option allows the kernel to assign the pci-domains
according to the device-tree content. This allows multiple PCIe
controllers to coexist in the system.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/mach-qcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -7,6 +7,7 @@ menuconfig ARCH_QCOM
select ARM_AMBA
select PINCTRL
select QCOM_SCM if SMP
+ select PCI_DOMAINS if PCI
help
Support for Qualcomm's devicetree based systems.

153
target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch Normal file
View File

@ -0,0 +1,153 @@
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
To: krzk@kernel.org, vireshk@kernel.org, robh+dt@kernel.org
Cc: sboyd@kernel.org, roger.lu@mediatek.com,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
b.zolnierkie@samsung.com, m.szyprowski@samsung.com,
Stephen Boyd <sboyd@codeaurora.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>
Subject: [PATCH v5 1/4] PM / OPP: Support adjusting OPP voltages at runtime
Date: Wed, 16 Oct 2019 16:57:53 +0200
Message-ID: <20191016145756.16004-2-s.nawrocki@samsung.com> (raw)
In-Reply-To: <20191016145756.16004-1-s.nawrocki@samsung.com>
From: Stephen Boyd <sboyd@codeaurora.org>
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
employed to optimize the operating voltage of a device. At a
given frequency, the hardware monitors dynamic factors and either
makes a suggestion for how much to adjust a voltage for the
current frequency, or it automatically adjusts the voltage
without software intervention. Add an API to the OPP library for
the former case, so that AVS type devices can update the voltages
for an OPP when the hardware determines the voltage should
change. The assumption is that drivers like CPUfreq or devfreq
will register for the OPP notifiers and adjust the voltage
according to suggestions that AVS makes.
This patch is derived from [1] submitted by Stephen.
[1] https://lore.kernel.org/patchwork/patch/599279/
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
[s.nawrocki@samsung.com: added handling of OPP min/max voltage]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
drivers/opp/core.c | 69 ++++++++++++++++++++++++++++++++++++++++++
include/linux/pm_opp.h | 13 ++++++++
2 files changed, 82 insertions(+)
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -2102,6 +2102,75 @@ put_table:
}
/**
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
+ * @dev: device for which we do this operation
+ * @freq: OPP frequency to adjust voltage of
+ * @u_volt: new OPP target voltage
+ * @u_volt_min: new OPP min voltage
+ * @u_volt_max: new OPP max voltage
+ *
+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
+ * copy operation, returns 0 if no modifcation was done OR modification was
+ * successful.
+ */
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt, unsigned long u_volt_min,
+ unsigned long u_volt_max)
+
+{
+ struct opp_table *opp_table;
+ struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV);
+ int r = 0;
+
+ /* Find the opp_table */
+ opp_table = _find_opp_table(dev);
+ if (IS_ERR(opp_table)) {
+ r = PTR_ERR(opp_table);
+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
+ return r;
+ }
+
+ mutex_lock(&opp_table->lock);
+
+ /* Do we have the frequency? */
+ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
+ if (tmp_opp->rate == freq) {
+ opp = tmp_opp;
+ break;
+ }
+ }
+
+ if (IS_ERR(opp)) {
+ r = PTR_ERR(opp);
+ goto adjust_unlock;
+ }
+
+ /* Is update really needed? */
+ if (opp->supplies->u_volt == u_volt)
+ goto adjust_unlock;
+
+ opp->supplies->u_volt = u_volt;
+ opp->supplies->u_volt_min = u_volt_min;
+ opp->supplies->u_volt_max = u_volt_max;
+
+ dev_pm_opp_get(opp);
+ mutex_unlock(&opp_table->lock);
+
+ /* Notify the voltage change of the OPP */
+ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
+ opp);
+
+ dev_pm_opp_put(opp);
+ goto adjust_put_table;
+
+adjust_unlock:
+ mutex_unlock(&opp_table->lock);
+adjust_put_table:
+ dev_pm_opp_put_opp_table(opp_table);
+ return r;
+}
+
+/**
* dev_pm_opp_enable() - Enable a specific OPP
* @dev: device for which we do this operation
* @freq: OPP frequency to enable
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -22,6 +22,7 @@ struct opp_table;
enum dev_pm_opp_event {
OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ OPP_EVENT_ADJUST_VOLTAGE,
};
/**
@@ -113,6 +114,10 @@ int dev_pm_opp_add(struct device *dev, u
void dev_pm_opp_remove(struct device *dev, unsigned long freq);
void dev_pm_opp_remove_all_dynamic(struct device *dev);
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt, unsigned long u_volt_min,
+ unsigned long u_volt_max);
+
int dev_pm_opp_enable(struct device *dev, unsigned long freq);
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
@@ -242,6 +247,14 @@ static inline void dev_pm_opp_remove_all
{
}
+static inline int
+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt, unsigned long u_volt_min,
+ unsigned long u_volt_max)
+{
+ return 0;
+}
+
static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
{
return 0;

52
target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch Normal file
View File

@ -0,0 +1,52 @@
From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001
From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Thu, 12 May 2016 14:41:33 +0300
Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for
device
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/opp/core.c | 21 +++++++++++++++++++++
include/linux/pm_opp.h | 1 +
2 files changed, 22 insertions(+)
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -127,6 +127,27 @@ unsigned long dev_pm_opp_get_freq(struct
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
+struct regulator *dev_pm_opp_get_regulator(struct device *dev)
+{
+ struct opp_table *opp_table;
+ struct regulator *reg;
+
+ rcu_read_lock();
+
+ opp_table = _find_opp_table(dev);
+ if (IS_ERR(opp_table)) {
+ rcu_read_unlock();
+ return ERR_CAST(opp_table);
+ }
+
+ reg = opp_table->regulators[0];
+
+ rcu_read_unlock();
+
+ return reg;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator);
+
/**
* dev_pm_opp_get_level() - Gets the level corresponding to an available opp
* @opp: opp for which level value has to be returned for
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -83,6 +83,7 @@ void dev_pm_opp_put_opp_table(struct opp
unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
+struct regulator *dev_pm_opp_get_regulator(struct device *dev);
unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp);

47
target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch Normal file
View File

@ -0,0 +1,47 @@
From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001
From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Thu, 25 Aug 2016 18:43:35 +0300
Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting
the OPP
When the voltage is adjusted, the voltage tolerance is not updated.
This can lead to situations where the voltage min value is greater
than the voltage max value. The final result is triggering a BUG()
in the regulator core.
Fix this by updating the voltage tolerance values too.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/opp/core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -2142,6 +2142,7 @@ int dev_pm_opp_adjust_voltage(struct dev
struct opp_table *opp_table;
struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV);
int r = 0;
+ unsigned long tol;
/* Find the opp_table */
opp_table = _find_opp_table(dev);
@@ -2171,8 +2172,17 @@ int dev_pm_opp_adjust_voltage(struct dev
goto adjust_unlock;
opp->supplies->u_volt = u_volt;
- opp->supplies->u_volt_min = u_volt_min;
- opp->supplies->u_volt_max = u_volt_max;
+
+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
+ if ( u_volt_min == u_volt )
+ opp->supplies->u_volt_min = u_volt - tol;
+ else
+ opp->supplies->u_volt_min = u_volt_min;
+
+ if ( u_volt_max == u_volt )
+ opp->supplies->u_volt_max = u_volt + tol;
+ else
+ opp->supplies->u_volt_max = u_volt_max;
dev_pm_opp_get(opp);
mutex_unlock(&opp_table->lock);

118
target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch Normal file
View File

@ -0,0 +1,118 @@
From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 18 Sep 2015 17:52:08 -0700
Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
employed to optimize the operating voltage of a device. At a
given frequency, the hardware monitors dynamic factors and either
makes a suggestion for how much to adjust a voltage for the
current frequency, or it automatically adjusts the voltage
without software intervention.
In the former case, an AVS driver will call
dev_pm_opp_modify_voltage() and update the voltage for the
particular OPP the CPUs are using. Add an OPP notifier to
cpufreq-dt so that we can adjust the voltage of the CPU when AVS
updates the OPP.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 65 insertions(+), 3 deletions(-)
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -27,6 +27,9 @@ struct private_data {
struct opp_table *opp_table;
struct device *cpu_dev;
const char *reg_name;
+ struct notifier_block opp_nb;
+ struct mutex lock;
+ unsigned long opp_freq;
bool have_static_opps;
};
@@ -42,12 +45,15 @@ static int set_target(struct cpufreq_pol
unsigned long freq = policy->freq_table[index].frequency;
int ret;
+ mutex_lock(&priv->lock);
ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
if (!ret) {
+ priv->opp_freq = freq * 1000;
arch_set_freq_scale(policy->related_cpus, freq,
policy->cpuinfo.max_freq);
}
+ mutex_unlock(&priv->lock);
return ret;
}
@@ -90,6 +96,39 @@ node_put:
return name;
}
+static int opp_notifier(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ struct dev_pm_opp *opp = data;
+ struct private_data *priv = container_of(nb, struct private_data,
+ opp_nb);
+ struct device *cpu_dev = priv->cpu_dev;
+ struct regulator *cpu_reg;
+ unsigned long volt, freq;
+ int ret = 0;
+
+ if (event == OPP_EVENT_ADJUST_VOLTAGE) {
+ cpu_reg = dev_pm_opp_get_regulator(cpu_dev);
+ if (IS_ERR(cpu_reg)) {
+ ret = PTR_ERR(cpu_reg);
+ goto out;
+ }
+ volt = dev_pm_opp_get_voltage(opp);
+ freq = dev_pm_opp_get_freq(opp);
+
+ mutex_lock(&priv->lock);
+ if (freq == priv->opp_freq) {
+ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt);
+ }
+ mutex_unlock(&priv->lock);
+ if (ret)
+ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret);
+ }
+
+out:
+ return notifier_from_errno(ret);
+}
+
static int resources_available(void)
{
struct device *cpu_dev;
@@ -246,10 +285,14 @@ static int cpufreq_init(struct cpufreq_p
__func__, ret);
}
+ mutex_init(&priv->lock);
+ priv->opp_nb.notifier_call = opp_notifier;
+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
+
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_free_opp;
+ goto out_unregister_nb;
}
priv->cpu_dev = cpu_dev;
@@ -281,6 +324,8 @@ static int cpufreq_init(struct cpufreq_p
out_free_cpufreq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_unregister_nb:
+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
out_free_opp:
if (priv->have_static_opps)
dev_pm_opp_of_cpumask_remove_table(policy->cpus);

199
target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch Normal file
View File

@ -0,0 +1,199 @@
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -39,20 +39,85 @@ static struct freq_attr *cpufreq_dt_attr
NULL,
};
+struct shared_data {
+ unsigned long *curr_freq_table;
+ unsigned long curr_l2_freq;
+ unsigned long curr_l2_volt;
+};
+
+static struct shared_data *cpus_shared_data;
+
static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct private_data *priv = policy->driver_data;
unsigned long freq = policy->freq_table[index].frequency;
+ struct clk *l2_clk = policy->l2_clk;
+ struct regulator *l2_regulator = policy->l2_regulator;
+ unsigned long l2_freq, target_l2_freq;
+ unsigned long l2_vol, target_l2_volt;
+ unsigned long target_freq;
int ret;
mutex_lock(&priv->lock);
ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
if (!ret) {
+ if (policy->l2_rate_set) {
+ int cpu, l2_index, tol = 0;
+ target_freq = freq * 1000;
+
+ cpus_shared_data->curr_freq_table[policy->cpu] = target_freq;
+ for_each_present_cpu(cpu)
+ if (cpu != policy->cpu)
+ target_freq = max(target_freq, cpus_shared_data->curr_freq_table[cpu]);
+
+ for (l2_index = 2; l2_index > 0; l2_index--)
+ if (target_freq >= policy->l2_cpufreq[l2_index])
+ break;
+
+ l2_freq = cpus_shared_data->curr_l2_freq;
+ target_l2_freq = policy->l2_rate[l2_index];
+
+ if (l2_freq != target_l2_freq) {
+
+ /*
+ * Set to idle bin if switching from normal to high bin
+ * or vice versa
+ */
+ if ( (l2_index == 2 && l2_freq == policy->l2_rate[1]) ||
+ (l2_index == 1 && l2_freq == policy->l2_rate[2]) ) {
+ ret = clk_set_rate(l2_clk, policy->l2_rate[0]);
+ if (ret)
+ goto exit;
+ }
+
+ /* scale l2 with the core */
+ ret = clk_set_rate(l2_clk, target_l2_freq);
+ if (ret)
+ goto exit;
+ cpus_shared_data->curr_l2_freq = target_l2_freq;
+
+ if (policy->l2_volt_set) {
+
+ l2_vol = cpus_shared_data->curr_l2_volt;
+ target_l2_volt = policy->l2_volt[l2_index];
+
+ if (l2_vol != target_l2_volt) {
+ tol = target_l2_volt * policy->l2_volt_tol / 100;
+ ret = regulator_set_voltage_tol(l2_regulator,target_l2_volt,tol);
+ if (ret)
+ goto exit;
+ cpus_shared_data->curr_l2_volt = target_l2_volt;
+ }
+ }
+ }
+ }
priv->opp_freq = freq * 1000;
arch_set_freq_scale(policy->related_cpus, freq,
policy->cpuinfo.max_freq);
}
+
+exit:
mutex_unlock(&priv->lock);
return ret;
@@ -195,6 +260,9 @@ static int cpufreq_init(struct cpufreq_p
bool fallback = false;
const char *name;
int ret;
+ struct device_node *np, *l2_np;
+ struct clk *l2_clk = NULL;
+ struct regulator *l2_regulator = NULL;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
@@ -302,6 +370,57 @@ static int cpufreq_init(struct cpufreq_p
policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+ policy->l2_rate_set = false;
+ policy->l2_volt_set = false;
+
+ l2_clk = clk_get(cpu_dev, "l2");
+ if (!IS_ERR(l2_clk))
+ policy->l2_clk = l2_clk;
+
+ l2_np = of_find_node_by_name(NULL, "qcom,l2");
+ if (l2_np) {
+ struct device_node *vdd;
+ np = of_node_get(priv->cpu_dev->of_node);
+
+ if (np)
+ of_property_read_u32(np, "voltage-tolerance", &policy->l2_volt_tol);
+
+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
+ if (policy->l2_rate[0] && policy->l2_rate[1] && policy->l2_rate[2]) {
+ policy->l2_rate_set = true;
+ of_property_read_u32_array(l2_np, "qcom,l2-cpufreq", policy->l2_cpufreq, 3);
+ of_property_read_u32_array(l2_np, "qcom,l2-volt", policy->l2_volt, 3);
+ } else
+ pr_warn("L2: failed to parse L2 rates\n");
+
+ if (!policy->l2_cpufreq[0] && !policy->l2_cpufreq[1] &&
+ !policy->l2_cpufreq[2] && policy->l2_rate_set) {
+ int i;
+
+ pr_warn("L2: failed to parse target cpu freq, using defaults\n");
+ for (i = 0; i < 3; i++)
+ policy->l2_cpufreq[i] = policy->l2_rate[i];
+ }
+
+ if (policy->l2_volt[0] && policy->l2_volt[1] && policy->l2_volt[2] &&
+ policy->l2_volt_tol && policy->l2_rate_set) {
+ vdd = of_parse_phandle(l2_np, "qcom,l2-supply", 0);
+
+ if (vdd) {
+ l2_regulator = devm_regulator_get(cpu_dev, vdd->name);
+ if (!IS_ERR(l2_regulator)) {
+ policy->l2_regulator = l2_regulator;
+ policy->l2_volt_set = true;
+ } else {
+ pr_warn("failed to get l2 supply\n");
+ l2_regulator = NULL;
+ }
+
+ of_node_put(vdd);
+ }
+ }
+ }
+
/* Support turbo/boost mode */
if (policy_has_boost_freq(policy)) {
/* This gets disabled by core on driver unregister */
@@ -401,6 +520,14 @@ static int dt_cpufreq_probe(struct platf
if (ret)
return ret;
+ cpus_shared_data = kzalloc(sizeof(struct shared_data), GFP_KERNEL);
+ if (!cpus_shared_data)
+ return -ENOMEM;
+
+ cpus_shared_data->curr_freq_table = kzalloc(sizeof(int) * CONFIG_NR_CPUS, GFP_KERNEL);
+ if (!cpus_shared_data->curr_freq_table)
+ return -ENOMEM;
+
if (data) {
if (data->have_governor_per_policy)
dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
@@ -419,6 +546,8 @@ static int dt_cpufreq_probe(struct platf
static int dt_cpufreq_remove(struct platform_device *pdev)
{
+ kfree(cpus_shared_data->curr_freq_table);
+ kfree(cpus_shared_data);
cpufreq_unregister_driver(&dt_cpufreq_driver);
return 0;
}
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -58,7 +58,15 @@ struct cpufreq_policy {
should set cpufreq */
unsigned int cpu; /* cpu managing this policy, must be online */
- struct clk *clk;
+ struct clk *clk;
+ struct clk *l2_clk; /* L2 clock */
+ struct regulator *l2_regulator; /* L2 supply */
+ unsigned int l2_rate[3]; /* L2 bus clock rate */
+ bool l2_rate_set;
+ unsigned int l2_cpufreq[3]; /* L2 target CPU frequency */
+ unsigned int l2_volt[3]; /* L2 voltage array */
+ bool l2_volt_set;
+ unsigned int l2_volt_tol; /* L2 voltage tolerance */
struct cpufreq_cpuinfo cpuinfo;/* see above */
unsigned int min; /* in kHz */

23
target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch Normal file
View File

@ -0,0 +1,23 @@
From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001
From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Tue, 17 May 2016 16:15:43 +0300
Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/cpufreq/cpufreq-dt.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -178,8 +178,10 @@ static int opp_notifier(struct notifier_
ret = PTR_ERR(cpu_reg);
goto out;
}
+ rcu_read_lock();
volt = dev_pm_opp_get_voltage(opp);
freq = dev_pm_opp_get_freq(opp);
+ rcu_read_unlock();
mutex_lock(&priv->lock);
if (freq == priv->opp_freq) {

243
target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch Normal file
View File

@ -0,0 +1,243 @@
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k
clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
+clk-qcom-y += fab_scaling.o
# Keep alphabetically sorted by config
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
--- /dev/null
+++ b/drivers/clk/qcom/fab_scaling.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/fab_scaling.h>
+
+struct qcom_fab_scaling_data {
+ u32 fab_freq_high;
+ u32 fab_freq_nominal;
+ u32 cpu_freq_threshold;
+ struct clk *apps_fab_clk;
+ struct clk *ddr_fab_clk;
+};
+
+static struct qcom_fab_scaling_data *drv_data;
+
+int scale_fabrics(unsigned long max_cpu_freq)
+{
+ struct clk *apps_fab_clk = drv_data->apps_fab_clk,
+ *ddr_fab_clk = drv_data->ddr_fab_clk;
+ unsigned long target_freq, cur_freq;
+ int ret;
+
+ /* Skip fab scaling if the driver is not ready */
+ if (!apps_fab_clk || !ddr_fab_clk)
+ return 0;
+
+ if (max_cpu_freq > drv_data->cpu_freq_threshold)
+ target_freq = drv_data->fab_freq_high;
+ else
+ target_freq = drv_data->fab_freq_nominal;
+
+ cur_freq = clk_get_rate(ddr_fab_clk);
+
+ if (target_freq != cur_freq) {
+ ret = clk_set_rate(apps_fab_clk, target_freq);
+ if (ret)
+ return ret;
+ ret = clk_set_rate(ddr_fab_clk, target_freq);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(scale_fabrics);
+
+static int ipq806x_fab_scaling_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct clk *apps_fab_clk, *ddr_fab_clk;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
+ if (!drv_data)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) {
+ pr_err("FABRICS turbo freq not found. Using defaults...\n");
+ drv_data->fab_freq_high = 533000000;
+ }
+
+ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) {
+ pr_err("FABRICS nominal freq not found. Using defaults...\n");
+ drv_data->fab_freq_nominal = 400000000;
+ }
+
+ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) {
+ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n");
+ drv_data->cpu_freq_threshold = 1000000000;
+ }
+
+ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk");
+ ret = PTR_ERR_OR_ZERO(apps_fab_clk);
+ if (ret) {
+ /*
+ * If apps fab clk node is present, but clock is not yet
+ * registered, we should try defering probe.
+ */
+ if (ret != -EPROBE_DEFER) {
+ pr_err("Failed to get APPS FABRIC clock: %d\n", ret);
+ ret = -ENODEV;
+ }
+ goto err;
+ }
+
+ clk_prepare_enable(apps_fab_clk);
+ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high);
+ drv_data->apps_fab_clk = apps_fab_clk;
+
+ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk");
+ ret = PTR_ERR_OR_ZERO(ddr_fab_clk);
+ if (ret) {
+ /*
+ * If ddr fab clk node is present, but clock is not yet
+ * registered, we should try defering probe.
+ */
+ if (ret != -EPROBE_DEFER) {
+ pr_err("Failed to get DDR FABRIC clock: %d\n", ret);
+ ddr_fab_clk = NULL;
+ ret = -ENODEV;
+ }
+ goto err;
+ }
+
+ clk_prepare_enable(ddr_fab_clk);
+ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high);
+ drv_data->ddr_fab_clk = ddr_fab_clk;
+
+ return 0;
+err:
+ kfree(drv_data);
+ return ret;
+}
+
+static int ipq806x_fab_scaling_remove(struct platform_device *pdev)
+{
+ kfree(drv_data);
+ return 0;
+}
+
+static const struct of_device_id fab_scaling_ipq806x_match_table[] = {
+ { .compatible = "qcom,fab-scaling" },
+ { }
+};
+
+static struct platform_driver fab_scaling_ipq806x_driver = {
+ .probe = ipq806x_fab_scaling_probe,
+ .remove = ipq806x_fab_scaling_remove,
+ .driver = {
+ .name = "fab-scaling",
+ .of_match_table = fab_scaling_ipq806x_match_table,
+ },
+};
+
+static int __init fab_scaling_ipq806x_init(void)
+{
+ return platform_driver_register(&fab_scaling_ipq806x_driver);
+}
+late_initcall(fab_scaling_ipq806x_init);
+
+static void __exit fab_scaling_ipq806x_exit(void)
+{
+ platform_driver_unregister(&fab_scaling_ipq806x_driver);
+}
+module_exit(fab_scaling_ipq806x_exit);
--- /dev/null
+++ b/include/linux/fab_scaling.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+#ifndef __FAB_SCALING_H
+#define __FAB_SCALING_H
+
+/**
+ * scale_fabrics - Scale DDR and APPS FABRICS
+ *
+ * This function monitors all the registered clocks and does APPS
+ * and DDR FABRIC scaling based on the idle frequencies with which
+ * it was registered.
+ *
+ */
+int scale_fabrics(unsigned long max_cpu_freq);
+
+#endif
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -20,6 +20,7 @@
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/thermal.h>
+#include <linux/fab_scaling.h>
#include "cpufreq-dt.h"
@@ -111,6 +112,13 @@ static int set_target(struct cpufreq_pol
}
}
}
+
+ /*
+ * Scale fabrics with max freq across all cores
+ */
+ ret = scale_fabrics(target_freq);
+ if (ret)
+ goto exit;
}
priv->opp_freq = freq * 1000;
arch_set_freq_scale(policy->related_cpus, freq,

29
target/linux/ipq806x/patches-5.10/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch Normal file
View File

@ -0,0 +1,29 @@
From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001
From: Lina Iyer <lina.iyer@linaro.org>
Date: Wed, 25 Mar 2015 14:25:29 -0600
Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus
Define ARM_QCOM_CPUIDLE config item to enable cpuidle support.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
---
drivers/cpuidle/Kconfig.arm | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -86,3 +86,10 @@ config ARM_MVEBU_V7_CPUIDLE
depends on ARCH_MVEBU && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_QCOM_CPUIDLE
+ bool "CPU Idle Driver for QCOM processors"
+ depends on ARCH_QCOM
+ select ARM_CPUIDLE
+ help
+ Select this to enable cpuidle on QCOM processors.

62
target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch Normal file
View File

@ -0,0 +1,62 @@
From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Wed, 29 Apr 2015 15:21:46 -0700
Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
on most ARM architectures. This automatically calculate ZRELADDR by
masking PHYS_OFFSET with 0xf8000000.
However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
network accelerators, and the bootloader removes this section from the
layout passed from the ATAGS (when used).
For newer bootloader, when DT is used, this is not a problem, we just
reserve this memory in the device tree. But if the bootloader doesn't
have DT support, then ATAGS have to be used. In this case, the ARM
decompressor will position the kernel in this low mem, which will not be
in the RAM section mapped by the bootloader, which means the kernel will
freeze in the middle of the boot process trying to map the memory.
As a work around, this patch allows disabling AUTO_ZRELADDR when
ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
which don't support device-tree, which is the case on certain early
IPQ806x based designs.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/Kconfig | 2 +-
arch/arm/Makefile | 2 ++
arch/arm/mach-qcom/Makefile.boot | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-qcom/Makefile.boot
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -318,7 +318,7 @@ config ARCH_MULTIPLATFORM
depends on MMU
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ARCH_QCOM
select TIMER_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -258,9 +258,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
else
MACHINE :=
endif
+ifeq ($(CONFIG_ARCH_QCOM),)
ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
MACHINE :=
endif
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y+= 0x42208000

23
target/linux/ipq806x/patches-5.10/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch Normal file
View File

@ -0,0 +1,23 @@
From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 09:31:44 +0100
Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/mtd/parsers/qcom_smem_part.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mtd/parsers/qcom_smem_part.c
+++ b/drivers/mtd/parsers/qcom_smem_part.c
@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+ /* "rootfs" conflicts with OpenWrt auto mounting */
+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
+ m_part->name = "ubi";
+
/*
* The last SMEM partition may have its size marked as
* something like 0xffffffff, which means "until the end of the

616
target/linux/ipq806x/patches-5.10/0063-1-ipq806x-tsens-driver.patch Normal file
View File

@ -0,0 +1,616 @@
From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001
From: Rajith Cherian <rajith@codeaurora.org>
Date: Tue, 14 Feb 2017 18:30:43 +0530
Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064
Add TSENS driver template to support IPQ8064.
This is a base file copied from tsens-8960.c
Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
ipq8064: tsens: TSENS driver support for IPQ8064
Support for IPQ8064 tsens driver. The driver works
with the thermal framework. The driver overrides the
following fucntionalities:
1. Get current temperature.
2. Get/Set trip temperatures.
3. Enabled/Disable trip points.
4. ISR for threshold generated interrupt.
5. Notify userspace when trip points are hit.
Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
---
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -2,5 +2,5 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \
- tsens-8960.o tsens-v2.o tsens-v1.o
+ tsens-8960.o tsens-v2.o tsens-v1.o tsens-ipq8064.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-ipq8064.c
@@ -0,0 +1,551 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include "tsens.h"
+
+#define CAL_MDEGC 30000
+
+#define CONFIG_ADDR 0x3640
+/* CONFIG_ADDR bitmasks */
+#define CONFIG 0x9b
+#define CONFIG_MASK 0xf
+#define CONFIG_SHIFT 0
+
+#define STATUS_CNTL_8064 0x3660
+#define CNTL_ADDR 0x3620
+/* CNTL_ADDR bitmasks */
+#define EN BIT(0)
+#define SW_RST BIT(1)
+#define SENSOR0_EN BIT(3)
+#define SLP_CLK_ENA BIT(26)
+#define MEASURE_PERIOD 1
+#define SENSOR0_SHIFT 3
+
+/* INT_STATUS_ADDR bitmasks */
+#define MIN_STATUS_MASK BIT(0)
+#define LOWER_STATUS_CLR BIT(1)
+#define UPPER_STATUS_CLR BIT(2)
+#define MAX_STATUS_MASK BIT(3)
+
+#define THRESHOLD_ADDR 0x3624
+/* THRESHOLD_ADDR bitmasks */
+#define THRESHOLD_MAX_CODE 0x20000
+#define THRESHOLD_MIN_CODE 0
+#define THRESHOLD_MAX_LIMIT_SHIFT 24
+#define THRESHOLD_MIN_LIMIT_SHIFT 16
+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
+#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \
+ THRESHOLD_MAX_LIMIT_SHIFT)
+#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \
+ THRESHOLD_MIN_LIMIT_SHIFT)
+#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
+ THRESHOLD_UPPER_LIMIT_SHIFT)
+#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
+ THRESHOLD_LOWER_LIMIT_SHIFT)
+
+/* Initial temperature threshold values */
+#define LOWER_LIMIT_TH 0x9d /* 95C */
+#define UPPER_LIMIT_TH 0xa6 /* 105C */
+#define MIN_LIMIT_TH 0x0
+#define MAX_LIMIT_TH 0xff
+
+#define S0_STATUS_ADDR 0x3628
+#define STATUS_ADDR_OFFSET 2
+#define SENSOR_STATUS_SIZE 4
+#define INT_STATUS_ADDR 0x363c
+#define TRDY_MASK BIT(7)
+#define TIMEOUT_US 100
+
+#define TSENS_EN BIT(0)
+#define TSENS_SW_RST BIT(1)
+#define TSENS_ADC_CLK_SEL BIT(2)
+#define SENSOR0_EN BIT(3)
+#define SENSOR1_EN BIT(4)
+#define SENSOR2_EN BIT(5)
+#define SENSOR3_EN BIT(6)
+#define SENSOR4_EN BIT(7)
+#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \
+ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN)
+#define TSENS_8064_SENSOR5_EN BIT(8)
+#define TSENS_8064_SENSOR6_EN BIT(9)
+#define TSENS_8064_SENSOR7_EN BIT(10)
+#define TSENS_8064_SENSOR8_EN BIT(11)
+#define TSENS_8064_SENSOR9_EN BIT(12)
+#define TSENS_8064_SENSOR10_EN BIT(13)
+#define TSENS_8064_SENSORS_EN (SENSORS_EN | \
+ TSENS_8064_SENSOR5_EN | \
+ TSENS_8064_SENSOR6_EN | \
+ TSENS_8064_SENSOR7_EN | \
+ TSENS_8064_SENSOR8_EN | \
+ TSENS_8064_SENSOR9_EN | \
+ TSENS_8064_SENSOR10_EN)
+
+#define TSENS_8064_SEQ_SENSORS 5
+#define TSENS_8064_S4_S5_OFFSET 40
+#define TSENS_FACTOR 1
+
+/* Trips: from very hot to very cold */
+enum tsens_trip_type {
+ TSENS_TRIP_STAGE3 = 0,
+ TSENS_TRIP_STAGE2,
+ TSENS_TRIP_STAGE1,
+ TSENS_TRIP_STAGE0,
+ TSENS_TRIP_NUM,
+};
+
+u32 tsens_8064_slope[] = {
+ 1176, 1176, 1154, 1176,
+ 1111, 1132, 1132, 1199,
+ 1132, 1199, 1132
+ };
+
+/* Temperature on y axis and ADC-code on x-axis */
+static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s)
+{
+ int degcbeforefactor, degc;
+
+ degcbeforefactor = (adc_code * s->slope) + s->offset;
+
+ if (degcbeforefactor == 0)
+ degc = degcbeforefactor;
+ else if (degcbeforefactor > 0)
+ degc = (degcbeforefactor + TSENS_FACTOR/2)
+ / TSENS_FACTOR;
+ else
+ degc = (degcbeforefactor - TSENS_FACTOR/2)
+ / TSENS_FACTOR;
+
+ return degc;
+}
+
+static int degC_to_code(int degC, const struct tsens_sensor *s)
+{
+ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2))
+ / s->slope;
+
+ if (code > THRESHOLD_MAX_CODE)
+ code = THRESHOLD_MAX_CODE;
+ else if (code < THRESHOLD_MIN_CODE)
+ code = THRESHOLD_MIN_CODE;
+ return code;
+}
+
+static int suspend_ipq8064(struct tsens_priv *priv)
+{
+ int ret;
+ unsigned int mask;
+ struct regmap *map = priv->tm_map;
+
+ ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
+ if (ret)
+ return ret;
+
+ mask = SLP_CLK_ENA | EN;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int resume_ipq8064(struct tsens_priv *priv)
+{
+ int ret;
+ struct regmap *map = priv->tm_map;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void notify_uspace_tsens_fn(struct work_struct *work)
+{
+ struct tsens_sensor *s = container_of(work, struct tsens_sensor,
+ notify_work);
+
+ sysfs_notify(&s->tzd->device.kobj, NULL, "type");
+}
+
+static void tsens_scheduler_fn(struct work_struct *work)
+{
+ struct tsens_priv *priv = container_of(work, struct tsens_priv,
+ tsens_work);
+ unsigned int threshold, threshold_low, code, reg, sensor, mask;
+ unsigned int sensor_addr;
+ bool upper_th_x, lower_th_x;
+ int adc_code, ret;
+
+ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg);
+ if (ret)
+ return;
+ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR;
+ ret = regmap_write(priv->tm_map, STATUS_CNTL_8064, reg);
+ if (ret)
+ return;
+
+ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR);
+ ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &threshold);
+ if (ret)
+ return;
+ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK)
+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
+ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK)
+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
+
+ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg);
+ if (ret)
+ return;
+
+ ret = regmap_read(priv->tm_map, CNTL_ADDR, &sensor);
+ if (ret)
+ return;
+ sensor &= (uint32_t) TSENS_8064_SENSORS_EN;
+ sensor >>= SENSOR0_SHIFT;
+
+ /* Constraint: There is only 1 interrupt control register for all
+ * 11 temperature sensor. So monitoring more than 1 sensor based
+ * on interrupts will yield inconsistent result. To overcome this
+ * issue we will monitor only sensor 0 which is the master sensor.
+ */
+
+ /* Skip if the sensor is disabled */
+ if (sensor & 1) {
+ ret = regmap_read(priv->tm_map, priv->sensor[0].status, &code);
+ if (ret)
+ return;
+ upper_th_x = code >= threshold;
+ lower_th_x = code <= threshold_low;
+ if (upper_th_x)
+ mask |= UPPER_STATUS_CLR;
+ if (lower_th_x)
+ mask |= LOWER_STATUS_CLR;
+ if (upper_th_x || lower_th_x) {
+ /* Notify user space */
+ schedule_work(&priv->sensor[0].notify_work);
+ regmap_read(priv->tm_map, sensor_addr, &adc_code);
+ pr_debug("Trigger (%d degrees) for sensor %d\n",
+ code_to_degC(adc_code, &priv->sensor[0]), 0);
+ }
+ }
+ regmap_write(priv->tm_map, STATUS_CNTL_8064, reg & mask);
+
+ /* force memory to sync */
+ mb();
+}
+
+static irqreturn_t tsens_isr(int irq, void *data)
+{
+ struct tsens_priv *priv = data;
+
+ schedule_work(&priv->tsens_work);
+ return IRQ_HANDLED;
+}
+
+static void hw_init(struct tsens_priv *priv)
+{
+ int ret;
+ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0;
+ unsigned int reg_status_cntl = 0;
+
+ regmap_read(priv->tm_map, CNTL_ADDR, &reg_cntl);
+ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl | TSENS_SW_RST);
+
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18)
+ | (((1 << priv->num_sensors) - 1) << SENSOR0_SHIFT);
+ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+ regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg_status_cntl);
+ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR
+ | MIN_STATUS_MASK | MAX_STATUS_MASK;
+ regmap_write(priv->tm_map, STATUS_CNTL_8064, reg_status_cntl);
+ reg_cntl |= TSENS_EN;
+ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+
+ regmap_read(priv->tm_map, CONFIG_ADDR, &reg_cfg);
+ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT);
+ regmap_write(priv->tm_map, CONFIG_ADDR, reg_cfg);
+
+ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT)
+ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT)
+ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT)
+ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
+
+ regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_thr);
+
+ ret = devm_request_irq(priv->dev, priv->tsens_irq, tsens_isr,
+ IRQF_TRIGGER_RISING, "tsens_interrupt", priv);
+ if (ret < 0) {
+ pr_err("%s: request_irq FAIL: %d\n", __func__, ret);
+ return;
+ }
+
+ INIT_WORK(&priv->tsens_work, tsens_scheduler_fn);
+}
+
+static int init_ipq8064(struct tsens_priv *priv)
+{
+ int ret, i;
+ u32 reg_cntl, offset = 0;
+
+ init_common(priv);
+ if (!priv->tm_map)
+ return -ENODEV;
+
+ /*
+ * The status registers for each sensor are discontiguous
+ * because some SoCs have 5 sensors while others have more
+ * but the control registers stay in the same place, i.e
+ * directly after the first 5 status registers.
+ */
+ for (i = 0; i < priv->num_sensors; i++) {
+ if (i >= TSENS_8064_SEQ_SENSORS)
+ offset = TSENS_8064_S4_S5_OFFSET;
+
+ priv->sensor[i].status = S0_STATUS_ADDR + offset
+ + (i << STATUS_ADDR_OFFSET);
+ priv->sensor[i].slope = tsens_8064_slope[i];
+ INIT_WORK(&priv->sensor[i].notify_work,
+ notify_uspace_tsens_fn);
+ }
+
+ reg_cntl = SW_RST;
+ ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
+ if (ret)
+ return ret;
+
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
+ reg_cntl &= ~SW_RST;
+ ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
+ CONFIG_MASK, CONFIG);
+
+ reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ reg_cntl |= EN;
+ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int calibrate_ipq8064(struct tsens_priv *priv)
+{
+ int i;
+ char *data, *data_backup;
+
+ ssize_t num_read = priv->num_sensors;
+ struct tsens_sensor *s = priv->sensor;
+
+ data = qfprom_read(priv->dev, "calib");
+ if (IS_ERR(data)) {
+ pr_err("Calibration not found.\n");
+ return PTR_ERR(data);
+ }
+
+ data_backup = qfprom_read(priv->dev, "calib_backup");
+ if (IS_ERR(data_backup)) {
+ pr_err("Backup calibration not found.\n");
+ return PTR_ERR(data_backup);
+ }
+
+ for (i = 0; i < num_read; i++) {
+ s[i].calib_data = readb_relaxed(data + i);
+ s[i].calib_data_backup = readb_relaxed(data_backup + i);
+
+ if (s[i].calib_data_backup)
+ s[i].calib_data = s[i].calib_data_backup;
+ if (!s[i].calib_data) {
+ pr_err("QFPROM TSENS calibration data not present\n");
+ return -ENODEV;
+ }
+ s[i].slope = tsens_8064_slope[i];
+ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
+ }
+
+ hw_init(priv);
+
+ return 0;
+}
+
+static int get_temp_ipq8064(struct tsens_priv *priv, int id, int *temp)
+{
+ int ret;
+ u32 code, trdy;
+ const struct tsens_sensor *s = &priv->sensor[id];
+ unsigned long timeout;
+
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+ do {
+ ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
+ if (ret)
+ return ret;
+ if (!(trdy & TRDY_MASK))
+ continue;
+ ret = regmap_read(priv->tm_map, s->status, &code);
+ if (ret)
+ return ret;
+ *temp = code_to_degC(code, s);
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static int set_trip_temp_ipq8064(void *data, int trip, int temp)
+{
+ unsigned int reg_th, reg_cntl;
+ int ret, code, code_chk, hi_code, lo_code;
+ const struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
+
+ code_chk = code = degC_to_code(temp, s);
+
+ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
+ return -EINVAL;
+
+ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg_cntl);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &reg_th);
+ if (ret)
+ return ret;
+
+ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
+ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
+
+ switch (trip) {
+ case TSENS_TRIP_STAGE3:
+ code <<= THRESHOLD_MAX_LIMIT_SHIFT;
+ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
+ break;
+ case TSENS_TRIP_STAGE2:
+ if (code_chk <= lo_code)
+ return -EINVAL;
+ code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
+ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
+ break;
+ case TSENS_TRIP_STAGE1:
+ if (code_chk >= hi_code)
+ return -EINVAL;
+ code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
+ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
+ break;
+ case TSENS_TRIP_STAGE0:
+ code <<= THRESHOLD_MIN_LIMIT_SHIFT;
+ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_th | code);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int set_trip_activate_ipq8064(void *data, int trip,
+ enum thermal_trip_activation_mode mode)
+{
+ unsigned int reg_cntl, mask, val;
+ const struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
+ int ret;
+
+ if (!priv || trip < 0)
+ return -EINVAL;
+
+ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg_cntl);
+ if (ret)
+ return ret;
+
+ switch (trip) {
+ case TSENS_TRIP_STAGE3:
+ mask = MAX_STATUS_MASK;
+ break;
+ case TSENS_TRIP_STAGE2:
+ mask = UPPER_STATUS_CLR;
+ break;
+ case TSENS_TRIP_STAGE1:
+ mask = LOWER_STATUS_CLR;
+ break;
+ case TSENS_TRIP_STAGE0:
+ mask = MIN_STATUS_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
+ val = reg_cntl | mask;
+ else
+ val = reg_cntl & ~mask;
+
+ ret = regmap_write(priv->tm_map, STATUS_CNTL_8064, val);
+ if (ret)
+ return ret;
+
+ /* force memory to sync */
+ mb();
+ return 0;
+}
+
+const struct tsens_ops ops_ipq8064 = {
+ .init = init_ipq8064,
+ .calibrate = calibrate_ipq8064,
+ .get_temp = get_temp_ipq8064,
+ .suspend = suspend_ipq8064,
+ .resume = resume_ipq8064,
+ .set_trip_temp = set_trip_temp_ipq8064,
+ .set_trip_activate = set_trip_activate_ipq8064,
+};
+
+const struct tsens_plat_data data_ipq8064 = {
+ .num_sensors = 11,
+ .ops = &ops_ipq8064,
+};
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -69,8 +69,11 @@ static const struct of_device_id tsens_t
}, {
.compatible = "qcom,tsens-v2",
.data = &data_tsens_v2,
+ }, {
+ .compatible = "qcom,ipq8064-tsens",
+ .data = &data_ipq8064,
},
- {}
+ {}
};
MODULE_DEVICE_TABLE(of, tsens_table);
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -324,7 +324,7 @@ extern const struct tsens_plat_data data
extern const struct tsens_plat_data data_8916, data_8974;
/* TSENS v1 targets */
-extern const struct tsens_plat_data data_tsens_v1;
+extern const struct tsens_plat_data data_tsens_v1, data_ipq8064;
/* TSENS v2 targets */
extern const struct tsens_plat_data data_8996, data_tsens_v2;

437
target/linux/ipq806x/patches-5.10/0063-2-tsens-support-configurable-interrupts.patch Normal file
View File

@ -0,0 +1,437 @@
From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001
From: Rajith Cherian <rajith@codeaurora.org>
Date: Wed, 1 Feb 2017 19:00:26 +0530
Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts
Provide support for adding configurable high and
configurable low trip temperatures. An interrupts is
also triggerred when these trip points are hit. The
interrupts can be activated or deactivated from sysfs.
This functionality is made available only if
CONFIG_THERMAL_WRITABLE_TRIPS is defined.
Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934
Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
---
.../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++
drivers/thermal/of-thermal.c | 63 ++++++++++++++++++----
drivers/thermal/qcom/tsens.c | 43 ++++++++++++---
drivers/thermal/qcom/tsens.h | 11 ++++
drivers/thermal/thermal_core.c | 44 ++++++++++++++-
include/linux/thermal.h | 14 +++++
6 files changed, 162 insertions(+), 17 deletions(-)
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -91,7 +91,7 @@ static int of_thermal_get_temp(struct th
{
struct __thermal_zone *data = tz->devdata;
- if (!data->ops->get_temp)
+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->get_temp(data->sensor_data, temp);
@@ -102,7 +102,8 @@ static int of_thermal_set_trips(struct t
{
struct __thermal_zone *data = tz->devdata;
- if (!data->ops || !data->ops->set_trips)
+ if (!data->ops || !data->ops->set_trips
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->set_trips(data->sensor_data, low, high);
@@ -188,6 +189,9 @@ static int of_thermal_set_emul_temp(stru
{
struct __thermal_zone *data = tz->devdata;
+ if (data->mode == THERMAL_DEVICE_DISABLED)
+ return -EINVAL;
+
return data->ops->set_emul_temp(data->sensor_data, temp);
}
@@ -196,7 +200,7 @@ static int of_thermal_get_trend(struct t
{
struct __thermal_zone *data = tz->devdata;
- if (!data->ops->get_trend)
+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->get_trend(data->sensor_data, trip, trend);
@@ -297,7 +301,9 @@ static int of_thermal_set_mode(struct th
mutex_unlock(&tz->lock);
data->mode = mode;
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+ if (mode == THERMAL_DEVICE_ENABLED)
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
}
@@ -307,7 +313,8 @@ static int of_thermal_get_trip_type(stru
{
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*type = data->trips[trip].type;
@@ -315,12 +322,39 @@ static int of_thermal_get_trip_type(stru
return 0;
}
+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
+ int trip, enum thermal_trip_activation_mode mode)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
+ return -EDOM;
+
+ /*
+ * The configurable_hi and configurable_lo trip points can be
+ * activated and deactivated.
+ */
+
+ if (data->ops->set_trip_activate) {
+ int ret;
+
+ ret = data->ops->set_trip_activate(data->sensor_data,
+ trip, mode);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
int *temp)
{
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*temp = data->trips[trip].temperature;
@@ -333,7 +367,8 @@ static int of_thermal_set_trip_temp(stru
{
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
if (data->ops->set_trip_temp) {
@@ -355,7 +390,8 @@ static int of_thermal_get_trip_hyst(stru
{
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*hyst = data->trips[trip].hysteresis;
@@ -368,7 +404,8 @@ static int of_thermal_set_trip_hyst(stru
{
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
/* thermal framework should take care of data->mask & (1 << trip) */
@@ -443,6 +480,9 @@ thermal_zone_of_add_sensor(struct device
if (ops->set_emul_temp)
tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+ if (ops->set_trip_activate)
+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
+
mutex_unlock(&tzd->lock);
return tzd;
@@ -762,7 +802,10 @@ static const char * const trip_types[] =
[THERMAL_TRIP_ACTIVE] = "active",
[THERMAL_TRIP_PASSIVE] = "passive",
[THERMAL_TRIP_HOT] = "hot",
- [THERMAL_TRIP_CRITICAL] = "critical",
+ [THERMAL_TRIP_CRITICAL] = "critical_high",
+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
};
/**
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -22,7 +22,7 @@ static int tsens_get_temp(void *data, in
static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = data;
+ struct tsens_sensor *s = data;
struct tsens_priv *priv = s->priv;
if (priv->ops->get_trend)
@@ -31,9 +31,10 @@ static int tsens_get_trend(void *data, i
return -ENOTSUPP;
}
-static int __maybe_unused tsens_suspend(struct device *dev)
+static int __maybe_unused tsens_suspend(void *data)
{
- struct tsens_priv *priv = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
if (priv->ops && priv->ops->suspend)
return priv->ops->suspend(priv);
@@ -41,9 +42,10 @@ static int __maybe_unused tsens_suspend
return 0;
}
-static int __maybe_unused tsens_resume(struct device *dev)
+static int __maybe_unused tsens_resume(void *data)
{
- struct tsens_priv *priv = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
if (priv->ops && priv->ops->resume)
return priv->ops->resume(priv);
@@ -51,6 +53,30 @@ static int __maybe_unused tsens_resume(s
return 0;
}
+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
+{
+ struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
+
+ if (priv->ops && priv->ops->set_trip_temp)
+ return priv->ops->set_trip_temp(s, trip, temp);
+
+ return 0;
+}
+
+static int __maybe_unused tsens_activate_trip_type(void *data, int trip,
+ enum thermal_trip_activation_mode mode)
+{
+ struct tsens_sensor *s = data;
+ struct tsens_priv *priv = s->priv;
+
+ if (priv->ops && priv->ops->set_trip_activate)
+ return priv->ops->set_trip_activate(s, trip, mode);
+
+ return 0;
+}
+
+
static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
static const struct of_device_id tsens_table[] = {
@@ -80,6 +106,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
static const struct thermal_zone_of_device_ops tsens_of_ops = {
.get_temp = tsens_get_temp,
.get_trend = tsens_get_trend,
+ .set_trip_temp = tsens_set_trip_temp,
+ .set_trip_activate = tsens_activate_trip_type,
};
static int tsens_register(struct tsens_priv *priv)
@@ -123,7 +151,7 @@ static int tsens_probe(struct platform_d
if (id)
data = id->data;
else
- data = &data_8960;
+ return -EINVAL;
num_sensors = data->num_sensors;
@@ -144,6 +172,9 @@ static int tsens_probe(struct platform_d
priv->dev = dev;
priv->num_sensors = num_sensors;
priv->ops = data->ops;
+
+ priv->tsens_irq = platform_get_irq(pdev, 0);
+
for (i = 0; i < priv->num_sensors; i++) {
if (data->hw_ids)
priv->sensor[i].hw_id = data->hw_ids[i];
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -40,9 +40,12 @@ enum tsens_ver {
struct tsens_sensor {
struct tsens_priv *priv;
struct thermal_zone_device *tzd;
+ struct work_struct notify_work;
int offset;
unsigned int id;
unsigned int hw_id;
+ int calib_data;
+ int calib_data_backup;
int slope;
u32 status;
};
@@ -57,6 +60,9 @@ struct tsens_sensor {
* @suspend: Function to suspend the tsens device
* @resume: Function to resume the tsens device
* @get_trend: Function to get the thermal/temp trend
+ * @set_trip_temp: Function to set trip temp
+ * @get_trip_temp: Function to get trip temp
+ * @set_trip_activate: Function to activate trip points
*/
struct tsens_ops {
/* mandatory callbacks */
@@ -69,6 +75,9 @@ struct tsens_ops {
int (*suspend)(struct tsens_priv *priv);
int (*resume)(struct tsens_priv *priv);
int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend);
+ int (*set_trip_temp)(void *data, int trip, int temp);
+ int (*set_trip_activate)(void *data, int trip,
+ enum thermal_trip_activation_mode mode);
};
#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
@@ -300,6 +309,7 @@ struct tsens_context {
struct tsens_priv {
struct device *dev;
u32 num_sensors;
+ u32 tsens_irq;
struct regmap *tm_map;
struct regmap *srot_map;
u32 tm_offset;
@@ -308,6 +318,7 @@ struct tsens_priv {
const struct tsens_features *feat;
const struct reg_field *fields;
const struct tsens_ops *ops;
+ struct work_struct tsens_work;
struct tsens_sensor sensor[0];
};
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -113,12 +113,48 @@ trip_point_type_show(struct device *dev,
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
+ case THERMAL_TRIP_CONFIGURABLE_HI:
+ return sprintf(buf, "configurable_hi\n");
+ case THERMAL_TRIP_CONFIGURABLE_LOW:
+ return sprintf(buf, "configurable_low\n");
+ case THERMAL_TRIP_CRITICAL_LOW:
+ return sprintf(buf, "critical_low\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
+trip_point_type_activate(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ char *enabled = "enabled";
+ char *disabled = "disabled";
+
+ if (!tz->ops->set_trip_activate)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
+ return -EINVAL;
+
+ if (!strncmp(buf, enabled, strlen(enabled)))
+ ret = tz->ops->set_trip_activate(tz, trip,
+ THERMAL_TRIP_ACTIVATION_ENABLED);
+ else if (!strncmp(buf, disabled, strlen(disabled)))
+ ret = tz->ops->set_trip_activate(tz, trip,
+ THERMAL_TRIP_ACTIVATION_DISABLED);
+ else
+ ret = -EINVAL;
+
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -559,6 +595,12 @@ static int create_trip_attrs(struct ther
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
+ tz->trip_type_attrs[indx].attr.store
+ = trip_point_type_activate;
+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
+ }
+
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -63,11 +63,19 @@ enum thermal_device_mode {
THERMAL_DEVICE_ENABLED,
};
+enum thermal_trip_activation_mode {
+ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
+ THERMAL_TRIP_ACTIVATION_ENABLED,
+};
+
enum thermal_trip_type {
THERMAL_TRIP_ACTIVE = 0,
THERMAL_TRIP_PASSIVE,
THERMAL_TRIP_HOT,
THERMAL_TRIP_CRITICAL,
+ THERMAL_TRIP_CONFIGURABLE_HI,
+ THERMAL_TRIP_CONFIGURABLE_LOW,
+ THERMAL_TRIP_CRITICAL_LOW,
};
enum thermal_trend {
@@ -105,6 +113,8 @@ struct thermal_zone_device_ops {
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
+ int (*set_trip_activate) (struct thermal_zone_device *, int,
+ enum thermal_trip_activation_mode);
int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
int (*get_crit_temp) (struct thermal_zone_device *, int *);
@@ -349,6 +359,8 @@ struct thermal_genl_event {
* temperature.
* @set_trip_temp: a pointer to a function that sets the trip temperature on
* hardware.
+ * @activate_trip_type: a pointer to a function to enable/disable trip
+ * temperature interrupts
*/
struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
@@ -356,6 +368,8 @@ struct thermal_zone_of_device_ops {
int (*set_trips)(void *, int, int);
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
+ int (*set_trip_activate)(void *, int,
+ enum thermal_trip_activation_mode);
};
/**

68
target/linux/ipq806x/patches-5.10/0063-3-tsens-fix-kernel-5_4.patch Normal file
View File

@ -0,0 +1,68 @@
--- a/drivers/thermal/qcom/tsens-ipq8064.c
+++ b/drivers/thermal/qcom/tsens-ipq8064.c
@@ -18,6 +18,7 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/nvmem-consumer.h>
+#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include "tsens.h"
@@ -320,15 +321,42 @@ static void hw_init(struct tsens_priv *p
INIT_WORK(&priv->tsens_work, tsens_scheduler_fn);
}
+static const struct regmap_config tsens_config = {
+ .name = "tm",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
static int init_ipq8064(struct tsens_priv *priv)
{
- int ret, i;
+ struct device *dev = priv->dev;
u32 reg_cntl, offset = 0;
+ struct resource *res;
+ resource_size_t size;
+ void __iomem *base;
+ int ret, i;
+ struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
+
+ if (!op)
+ return -EINVAL;
- init_common(priv);
- if (!priv->tm_map)
- return -ENODEV;
+ /* old DTs where SROT and TM were in a contiguous 2K block */
+ priv->tm_offset = 0x1000;
+ res = platform_get_resource(op, IORESOURCE_MEM, 0);
+ size = resource_size(res);
+ base = devm_ioremap(&op->dev, res->start, size);
+ if (IS_ERR(base)) {
+ ret = PTR_ERR(base);
+ goto err_put_device;
+ }
+
+ priv->tm_map = devm_regmap_init_mmio(dev, base, &tsens_config);
+ if (IS_ERR(priv->tm_map)) {
+ ret = PTR_ERR(priv->tm_map);
+ goto err_put_device;
+ }
/*
* The status registers for each sensor are discontiguous
* because some SoCs have 5 sensors while others have more
@@ -367,6 +395,10 @@ static int init_ipq8064(struct tsens_pri
return ret;
return 0;
+
+err_put_device:
+ put_device(&op->dev);
+ return ret;
}
static int calibrate_ipq8064(struct tsens_priv *priv)

107
target/linux/ipq806x/patches-5.10/0063-4-ip806x-tsense-rework-driver.patch Normal file
View File

@ -0,0 +1,107 @@
--- a/drivers/thermal/qcom/tsens-ipq8064.c
+++ b/drivers/thermal/qcom/tsens-ipq8064.c
@@ -13,10 +13,12 @@
*/
#include <linux/platform_device.h>
+#include <linux/err.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
+#include <linux/slab.h>
#include <linux/nvmem-consumer.h>
#include <linux/of_platform.h>
#include <linux/io.h>
@@ -211,9 +213,8 @@ static void tsens_scheduler_fn(struct wo
struct tsens_priv *priv = container_of(work, struct tsens_priv,
tsens_work);
unsigned int threshold, threshold_low, code, reg, sensor, mask;
- unsigned int sensor_addr;
bool upper_th_x, lower_th_x;
- int adc_code, ret;
+ int ret;
ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, &reg);
if (ret)
@@ -262,9 +263,8 @@ static void tsens_scheduler_fn(struct wo
if (upper_th_x || lower_th_x) {
/* Notify user space */
schedule_work(&priv->sensor[0].notify_work);
- regmap_read(priv->tm_map, sensor_addr, &adc_code);
pr_debug("Trigger (%d degrees) for sensor %d\n",
- code_to_degC(adc_code, &priv->sensor[0]), 0);
+ code_to_degC(code, &priv->sensor[0]), 0);
}
}
regmap_write(priv->tm_map, STATUS_CNTL_8064, reg & mask);
@@ -404,40 +404,55 @@ err_put_device:
static int calibrate_ipq8064(struct tsens_priv *priv)
{
int i;
- char *data, *data_backup;
-
+ int ret = 0;
+ u8 *data, *data_backup;
+ struct device *dev = priv->dev;
ssize_t num_read = priv->num_sensors;
struct tsens_sensor *s = priv->sensor;
- data = qfprom_read(priv->dev, "calib");
+ data = qfprom_read(dev, "calib");
if (IS_ERR(data)) {
- pr_err("Calibration not found.\n");
- return PTR_ERR(data);
+ ret = PTR_ERR(data);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Calibration not found.");
+ goto exit;
}
- data_backup = qfprom_read(priv->dev, "calib_backup");
+ data_backup = qfprom_read(dev, "calib_backup");
if (IS_ERR(data_backup)) {
- pr_err("Backup calibration not found.\n");
- return PTR_ERR(data_backup);
+ ret = PTR_ERR(data_backup);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Backup Calibration not found.");
+ goto free_data;
}
for (i = 0; i < num_read; i++) {
s[i].calib_data = readb_relaxed(data + i);
- s[i].calib_data_backup = readb_relaxed(data_backup + i);
+
+ if (!s[i].calib_data) {
+ s[i].calib_data_backup = readb_relaxed(data_backup + i);
+
+ if (!s[i].calib_data_backup) {
+ dev_err(dev, "QFPROM TSENS calibration data not present");
+ ret = -ENODEV;
+ goto free_backup;
+ }
- if (s[i].calib_data_backup)
s[i].calib_data = s[i].calib_data_backup;
- if (!s[i].calib_data) {
- pr_err("QFPROM TSENS calibration data not present\n");
- return -ENODEV;
}
+
s[i].slope = tsens_8064_slope[i];
s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
}
hw_init(priv);
- return 0;
+free_backup:
+ kfree(data_backup);
+free_data:
+ kfree(data);
+exit:
+ return ret;
}
static int get_temp_ipq8064(struct tsens_priv *priv, int id, int *temp)

21
target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch Normal file
View File

@ -0,0 +1,21 @@
From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 09:33:32 +0100
Subject: [PATCH 65/69] arm: override compiler flags
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7

210
target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch Normal file
View File

@ -0,0 +1,210 @@
From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
From: Adrian Panella <ianchi74@outlook.com>
Date: Thu, 9 Mar 2017 09:37:17 +0100
Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
---
arch/arm/Kconfig | 11 +++++
arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
init/main.c | 16 ++++++++
3 files changed, 98 insertions(+), 1 deletion(-)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to a new device tree property: bootloader-args.
+ If there is a property "append-rootblock" in DT under /chosen
+ and a root= option in bootloaders command line it will be parsed
+ and added to DT bootargs with the form: <append-rootblock>XX.
+ Only command line ATAG will be processed, the rest of the ATAGs
+ sent by bootloader will be ignored.
+
endchoice
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -4,6 +4,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
#endif
@@ -67,6 +69,80 @@ static uint32_t get_cell_size(const void
return cell_size;
}
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+/**
+ * taken from arch/x86/boot/string.c
+ * local_strstr - Find the first substring in a %NUL terminated string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ */
+static char *local_strstr(const char *s1, const char *s2)
+{
+ size_t l1, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ l1 = strlen(s1);
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
+{
+ char *ptr, *end, *tmp;
+ char *root="root=";
+ char *find_rootblock;
+ int i, l;
+ const char *rootblock;
+
+ find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l);
+ if(!find_rootblock)
+ find_rootblock = root;
+
+ //ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86
+ ptr = local_strstr(str, find_rootblock);
+
+ if(!ptr)
+ return dest;
+
+ end = strchr(ptr, ' ');
+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
+
+ // Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too.
+ tmp = strchr(ptr, ',');
+
+ if(tmp)
+ end = end < tmp ? end : tmp - 1;
+
+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ )
+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
+ ptr = end + 1;
+
+ /* if append-rootblock property is set use it to append to command line */
+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
+ if(rootblock != NULL) {
+ if(*dest != ' ') {
+ *dest = ' ';
+ dest++;
+ len++;
+ }
+ if (len + l + i <= COMMAND_LINE_SIZE) {
+ memcpy(dest, rootblock, l);
+ dest += l - 1;
+ memcpy(dest, ptr, i);
+ dest += i;
+ }
+ }
+ return dest;
+}
+#endif
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
@@ -86,12 +162,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //save original bootloader args
+ //and append ubi.mtd with root partition number to current cmdline
+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+
+#else
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
+#endif
}
*ptr = '\0';
@@ -166,7 +251,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ }
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
@@ -210,6 +297,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
+#else
+
+ }
+#endif
return fdt_pack(fdt);
}
--- a/init/main.c
+++ b/init/main.c
@@ -104,6 +104,10 @@
#define CREATE_TRACE_POINTS
#include <trace/events/initcall.h>
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#include <linux/of.h>
+#endif
+
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -633,6 +637,18 @@ asmlinkage __visible void __init start_k
pr_notice("Kernel command line: %s\n", boot_command_line);
/* parameters may set static keys */
jump_label_init();
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //Show bootloader's original command line for reference
+ if(of_chosen) {
+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
+ if(prop)
+ pr_notice("Bootloader command line (ignored): %s\n", prop);
+ else
+ pr_notice("Bootloader command line not present\n");
+ }
+#endif
+
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,

37
target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch Normal file
View File

@ -0,0 +1,37 @@
From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 11:03:18 +0100
Subject: [PATCH 69/69] arm: boot: add dts files
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/Makefile | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,7 +842,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq8062-wg2600hp3.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
+ qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-ap161.dtb \
+ qcom-ipq8064-ea7500-v1.dtb \
+ qcom-ipq8064-ea8500.dtb \
+ qcom-ipq8064-g10.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-unifi-ac-hd.dtb \
+ qcom-ipq8064-wg2600hp.dtb \
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8064-wxr-2533dhp.dtb \
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
+ qcom-ipq8068-ecw5410.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-fairphone-fp2.dtb \

10
target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch Normal file
View File

@ -0,0 +1,10 @@
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -598,6 +598,7 @@ static const struct of_device_id qcom_sc
SCM_HAS_BUS_CLK)
},
{ .compatible = "qcom,scm-ipq4019" },
+ { .compatible = "qcom,scm-ipq806x" },
{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |

70
target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch Normal file
View File

@ -0,0 +1,70 @@
From patchwork Mon May 21 20:57:38 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
X-Patchwork-Id: 917856
Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Andy Gross <andy.gross@linaro.org>,
Sven Eckelmann <sven.eckelmann@openmesh.com>
Date: Mon, 21 May 2018 22:57:38 +0200
From: Christian Lamparter <chunkeey@gmail.com>
List-Id: <linux-gpio.vger.kernel.org>
This patch adds the gpio-ranges property to almost all of
the Qualcomm ARM platforms that utilize the pinctrl-msm
framework.
The gpio-ranges property is part of the gpiolib subsystem.
As a result, the binding text is available in section
"2.1 gpio- and pin-controller interaction" of
Documentation/devicetree/bindings/gpio/gpio.txt
For more information please see the patch titled:
"pinctrl: msm: fix gpio-hog related boot issues" from
this series.
Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
To help with git bisect, the DT update patch has been intentionally
placed after the "pinctrl: msm: fix gpio-hog related boot issues".
Otherwise - if the order was reveresed - and bisect decides to split
between these two patches, the gpiochip_add_pin_ranges() function
will be executed twice with the same parameters for the same pinctrl.
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
13 files changed, 14 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -119,6 +119,7 @@
reg = <0x800000 0x4000>;
gpio-controller;
+ gpio-ranges = <&qcom_pinmux 0 0 69>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

29
target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch Normal file
View File

@ -0,0 +1,29 @@
From 51befb888f62b1a62434fb4b82328d698a30f9de Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Thu, 19 Mar 2020 23:44:24 +0100
Subject: ARM: dts: qcom: add scm definition to ipq806x
Add missing scm definition for ipq806x soc
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200319224424.18473-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -93,6 +93,12 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq806x", "qcom,scm";
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;

130
target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch Normal file
View File

@ -0,0 +1,130 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -20,7 +20,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -30,7 +30,7 @@
qcom,saw = <&saw0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
@@ -67,7 +67,7 @@
no-map;
};
- smem@41000000 {
+ smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
@@ -155,6 +155,7 @@
function = "pcie3_rst";
drive-strength = <12>;
bias-disable;
+ output-low;
};
};
@@ -219,21 +220,23 @@
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu1_aux";
};
saw0: regulator@2089000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw1: regulator@2099000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
@@ -251,7 +254,7 @@
syscon-tcsr = <&tcsr>;
- serial@12490000 {
+ gsbi2_serial: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -326,7 +329,7 @@
syscon-tcsr = <&tcsr>;
- serial@1a240000 {
+ gsbi5_serial: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -397,7 +400,7 @@
status = "disabled";
};
- sata@29000000 {
+ sata: sata@29000000 {
compatible = "qcom,ipq806x-ahci", "generic-ahci";
reg = <0x29000000 0x180>;
@@ -430,6 +433,7 @@
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
tcsr: syscon@1a400000 {
@@ -625,13 +629,13 @@
qcom,ee = <0>;
};
- amba {
- compatible = "simple-bus";
+ amba: amba {
+ compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc@12400000 {
+ sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -645,13 +649,12 @@
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
- mmc-ddr-1_8v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
- sdcc@12180000 {
+ sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";

992
target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch Normal file
View File

@ -0,0 +1,992 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
#address-cells = <1>;
@@ -28,6 +30,16 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2a>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
cpu1: cpu@1 {
@@ -38,11 +50,458 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2b>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+ };
+
+ qcom,l2 {
+ qcom,l2-rates = <384000000 1000000000 1200000000>;
+ qcom,l2-cpufreq = <384000000 600000000 1200000000>;
+ qcom,l2-volt = <1100000 1100000 1150000>;
+ qcom,l2-supply = <&smb208_s1a>;
+ };
+
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc", "arm,idle-state";
+ status = "disabled";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
+ };
+ };
+
+ opp_table0: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1000000>;
+ opp-microvolt-speed0-pvs1-v0 = <925000>;
+ opp-microvolt-speed0-pvs2-v0 = <875000>;
+ opp-microvolt-speed0-pvs3-v0 = <800000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000>;
+ opp-microvolt-speed0-pvs2-v0 = <925000>;
+ opp-microvolt-speed0-pvs3-v0 = <850000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1100000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000>;
+ opp-microvolt-speed0-pvs2-v0 = <995000>;
+ opp-microvolt-speed0-pvs3-v0 = <900000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1150000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000>;
+ opp-microvolt-speed0-pvs3-v0 = <950000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1200000>;
+ opp-microvolt-speed0-pvs1-v0 = <1125000>;
+ opp-microvolt-speed0-pvs2-v0 = <1075000>;
+ opp-microvolt-speed0-pvs3-v0 = <1000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1250000>;
+ opp-microvolt-speed0-pvs1-v0 = <1175000>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000>;
+ opp-microvolt-speed0-pvs3-v0 = <1050000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ };
+ };
+
+ thermal-zones {
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor6 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor7 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor8 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor9 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor10 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
};
};
@@ -93,6 +552,15 @@
};
};
+ fab-scaling {
+ compatible = "qcom,fab-scaling";
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
+ fab_freq_high = <533000000>;
+ fab_freq_nominal = <400000000>;
+ cpu_freq_threshold = <1000000000>;
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq806x", "qcom,scm";
@@ -120,6 +588,84 @@
reg-names = "lpass-lpaif";
};
+ qfprom: qfprom@700000 {
+ compatible = "qcom,qfprom", "syscon";
+ reg = <0x700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
+ tsens_backup: backup@410 {
+ reg = <0x410 0xb>;
+ };
+ speedbin_efuse: speedbin@0c0 {
+ reg = <0x0c0 0x4>;
+ };
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>;
@@ -159,6 +705,15 @@
};
};
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -168,6 +723,53 @@
};
};
+ nand_pins: nand_pins {
+ disable {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
leds_pins: leds_pins {
mux {
pins = "gpio7", "gpio8", "gpio9",
@@ -229,6 +831,17 @@
clock-output-names = "acpu1_aux";
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -241,6 +854,17 @@
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
@@ -436,6 +1060,15 @@
#power-domain-cells = <1>;
};
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+ reg = <0x900000 0x3680>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-ipq8064", "syscon";
reg = <0x1a400000 0x100>;
@@ -448,6 +1081,95 @@
#reset-cells = <1>;
};
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
+
+ hs_phy_0: hs_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_0: ss_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_0: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_0: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: hs_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
pcie0: pci@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
@@ -601,6 +1323,167 @@
perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
};
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
+ nand_controller: nand-controller@1ac00000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <7>;
+ snps,rd_osr_lmt = <7>;
+ snps,blen = <16 0 0 0 0 0 0>;
+ };
+
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
@@ -676,4 +1559,17 @@
};
};
};
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};

89
target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch Normal file
View File

@ -0,0 +1,89 @@
This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
instead of keeping a local version.
We drop partitions, LEDs and keys from the file as we will implement
them differently anyway.
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -42,16 +42,6 @@
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
-
- partition@0 {
- label = "rootfs";
- reg = <0x0 0x1000000>;
- };
-
- partition@1 {
- label = "scratch";
- reg = <0x1000000 0x1000000>;
- };
};
};
};
@@ -64,64 +54,5 @@
ports-implemented = <0x1>;
status = "ok";
};
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&buttons_pins>;
- pinctrl-names = "default";
-
- button@1 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- debounce-interval = <60>;
- };
- button@2 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&leds_pins>;
- pinctrl-names = "default";
-
- led@7 {
- label = "led_usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbdev";
- default-state = "off";
- };
-
- led@8 {
- label = "led_usb3";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbdev";
- default-state = "off";
- };
-
- led@9 {
- label = "status_led_fail";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led@26 {
- label = "sata_led";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- led@53 {
- label = "status_led_pass";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
};
};

14
target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch Normal file
View File

@ -0,0 +1,14 @@
This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
instead of keeping a local version. This patch adds our local adjustments
for the (local) additional contents of qcom-ipq8064.dtsi
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -56,3 +56,7 @@
};
};
};
+
+&CPU_SPC {
+ status = "okay";
+};

104
target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch Normal file
View File

@ -0,0 +1,104 @@
From 13bec8d49bdf10aab4e1570ef42417f6bfbb6126 Mon Sep 17 00:00:00 2001
From: Ajay Kishore <akisho@codeaurora.org>
Date: Fri, 27 Mar 2020 23:32:08 +0100
Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
For IPQ806x targets, TZ protects the registers that are used to
configure the routing of interrupts to a target processor.
To resolve this, this patch uses scm call to route GPIO interrupts
to application processor. Also the scm call interface is changed.
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-msm.c | 43 ++++++++++++++++++++++++++++++++------
1 file changed, 37 insertions(+), 6 deletions(-)
(limited to 'drivers/pinctrl/qcom/pinctrl-msm.c')
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -22,6 +22,8 @@
#include <linux/reboot.h>
#include <linux/pm.h>
#include <linux/log2.h>
+#include <linux/qcom_scm.h>
+#include <linux/io.h>
#include "../core.h"
#include "../pinconf.h"
@@ -57,6 +59,8 @@ struct msm_pinctrl {
struct irq_chip irq_chip;
int irq;
+ bool intr_target_use_scm;
+
raw_spinlock_t lock;
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
@@ -64,6 +68,7 @@ struct msm_pinctrl {
const struct msm_pinctrl_soc_data *soc;
void __iomem *regs[MAX_NR_TILES];
+ u32 phys_base[MAX_NR_TILES];
};
#define MSM_ACCESSOR(name) \
@@ -832,11 +837,30 @@ static int msm_gpio_irq_set_type(struct
else
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
- /* Route interrupts to application cpu */
- val = msm_readl_intr_target(pctrl, g);
- val &= ~(7 << g->intr_target_bit);
- val |= g->intr_target_kpss_val << g->intr_target_bit;
- msm_writel_intr_target(val, pctrl, g);
+ /* Route interrupts to application cpu.
+ * With intr_target_use_scm interrupts are routed to
+ * application cpu using scm calls.
+ */
+ if (pctrl->intr_target_use_scm) {
+ u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
+ int ret;
+
+ qcom_scm_io_readl(addr, &val);
+
+ val &= ~(7 << g->intr_target_bit);
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
+
+ ret = qcom_scm_io_writel(addr, val);
+ if (ret)
+ dev_err(pctrl->dev,
+ "Failed routing %lu interrupt to Apps proc",
+ d->hwirq);
+ } else {
+ val = msm_readl_intr_target(pctrl, g);
+ val &= ~(7 << g->intr_target_bit);
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
+ msm_writel_intr_target(val, pctrl, g);
+ }
/* Update configuration for gpio.
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
@@ -1138,6 +1162,9 @@ int msm_pinctrl_probe(struct platform_de
pctrl->dev = &pdev->dev;
pctrl->soc = soc_data;
pctrl->chip = msm_gpio_template;
+ pctrl->intr_target_use_scm = of_device_is_compatible(
+ pctrl->dev->of_node,
+ "qcom,ipq8064-pinctrl");
raw_spin_lock_init(&pctrl->lock);
@@ -1154,6 +1181,8 @@ int msm_pinctrl_probe(struct platform_de
pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pctrl->regs[0]))
return PTR_ERR(pctrl->regs[0]);
+
+ pctrl->phys_base[0] = res->start;
}
msm_pinctrl_setup_pm_reset(pctrl);

56
target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch Normal file
View File

@ -0,0 +1,56 @@
From 8d8cec9bf6e9260397872785f249dfb59a417d08 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 19 Feb 2020 18:59:39 +0100
Subject: ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions
Add missing gpio definition for mdio and rgmii2.
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20200219175940.744-1-ansuelsmth@gmail.com
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
@@ -299,7 +299,7 @@ static const char * const gpio_groups[]
};
static const char * const mdio_groups[] = {
- "gpio0", "gpio1", "gpio10", "gpio11",
+ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66",
};
static const char * const mi2s_groups[] = {
@@ -403,8 +403,8 @@ static const char * const usb2_hsic_grou
};
static const char * const rgmii2_groups[] = {
- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62",
+ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66",
};
static const char * const sata_groups[] = {
@@ -539,7 +539,7 @@ static const struct msm_function ipq8064
static const struct msm_pingroup ipq8064_groups[] = {
PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA),
@@ -603,7 +603,7 @@ static const struct msm_pingroup ipq8064
PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6),

98
target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch Normal file
View File

@ -0,0 +1,98 @@
From 000de5417107623925a4cf0310579f744ff43c28 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 4 Feb 2020 20:56:48 +0100
Subject: watchdog: qcom-wdt: disable pretimeout on timer platform
Some platform like ipq806x doesn't support pretimeout and define
some interrupts used by qcom,msm-timer. Change the driver to check
and use pretimeout only on qcom,kpss-wdt as it's the only platform
that actually supports it.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com
[groeck: Conflict resolution]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
---
drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
1 file changed, 23 insertions(+), 8 deletions(-)
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[]
[WDT_BITE_TIME] = 0x14,
};
+struct qcom_wdt_match_data {
+ const u32 *offset;
+ bool pretimeout;
+};
+
struct qcom_wdt {
struct watchdog_device wdd;
unsigned long rate;
@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(v
clk_disable_unprepare(data);
}
+static const struct qcom_wdt_match_data match_data_apcs_tmr = {
+ .offset = reg_offset_data_apcs_tmr,
+ .pretimeout = false,
+};
+
+static const struct qcom_wdt_match_data match_data_kpss = {
+ .offset = reg_offset_data_kpss,
+ .pretimeout = true,
+};
+
static int qcom_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct qcom_wdt *wdt;
struct resource *res;
struct device_node *np = dev->of_node;
- const u32 *regs;
+ const struct qcom_wdt_match_data *data;
u32 percpu_offset;
int irq, ret;
struct clk *clk;
- regs = of_device_get_match_data(dev);
- if (!regs) {
+ data = of_device_get_match_data(dev);
+ if (!data) {
dev_err(dev, "Unsupported QCOM WDT module\n");
return -ENODEV;
}
@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platfor
/* check if there is pretimeout support */
irq = platform_get_irq_optional(pdev, 0);
- if (irq > 0) {
+ if (data->pretimeout && irq > 0) {
ret = devm_request_irq(dev, irq, qcom_wdt_isr,
IRQF_TRIGGER_RISING,
"wdt_bark", &wdt->wdd);
@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platfor
wdt->wdd.min_timeout = 1;
wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
wdt->wdd.parent = dev;
- wdt->layout = regs;
+ wdt->layout = data->offset;
if (readl(wdt_addr(wdt, WDT_STS)) & 1)
wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resum
static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
static const struct of_device_id qcom_wdt_of_table[] = {
- { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
- { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
- { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
+ { .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
+ { .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
+ { .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
{ },
};
MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);

28
target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch Normal file
View File

@ -0,0 +1,28 @@
From 1aec193ea41d672d11592714cdda8167eb3b38fc Mon Sep 17 00:00:00 2001
From: Abhishek Sahu <absahu@codeaurora.org>
Date: Wed, 18 Mar 2020 14:16:56 +0100
Subject: ipq806x: gcc: Added the enable regs and mask for PRNG
Kernel got hanged while reading from /dev/hwrng at the
time of PRNG clock enable
Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)"
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lkml.kernel.org/r/20200318131657.345-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1225,6 +1225,8 @@ static struct clk_rcg prng_src = {
.parent_map = gcc_pxo_pll8_map,
},
.clkr = {
+ .enable_reg = 0x2e80,
+ .enable_mask = BIT(11),
.hw.init = &(struct clk_init_data){
.name = "prng_src",
.parent_names = gcc_pxo_pll8,

90
target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch Normal file
View File

@ -0,0 +1,90 @@
From eec152734be10c72d2d413a27ca9d282c28cdb61 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 10 Mar 2020 15:37:56 +0100
Subject: clk: qcom: clk-rpm: add missing rpm clk for ipq806x
Add missing definition of rpm clk for ipq806x soc
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++
include/dt-bindings/clock/qcom,rpmcc.h | 4 +++
3 files changed, 40 insertions(+)
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -15,6 +15,7 @@ Required properties :
"qcom,rpmcc-msm8916", "qcom,rpmcc"
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
"qcom,rpmcc-msm8996", "qcom,rpmcc"
"qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -543,10 +543,45 @@ static const struct rpm_clk_desc rpm_clk
.num_clks = ARRAY_SIZE(apq8064_clks),
};
+/* ipq806x */
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
+
+static struct clk_rpm *ipq806x_clks[] = {
+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
+};
+
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
+ .clks = ipq806x_clks,
+ .num_clks = ARRAY_SIZE(ipq806x_clks),
+};
+
static const struct of_device_id rpm_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 },
{ .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 },
{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -37,6 +37,10 @@
#define RPM_XO_A0 27
#define RPM_XO_A1 28
#define RPM_XO_A2 29
+#define RPM_NSS_FABRIC_0_CLK 30
+#define RPM_NSS_FABRIC_0_A_CLK 31
+#define RPM_NSS_FABRIC_1_CLK 32
+#define RPM_NSS_FABRIC_1_A_CLK 33
/* SMD RPM clocks */
#define RPM_SMD_XO_CLK_SRC 0

63
target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch Normal file
View File

@ -0,0 +1,63 @@
From b5f25304aece9f2e7eaab275bbb5461c666bf38c Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 19 Feb 2020 17:37:11 +0100
Subject: regulator: add smb208 support
Smb208 regulators are used on some ipq806x soc.
Add support for it to make it avaiable on some routers
that use it.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
2 files changed, 13 insertions(+)
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data r
{ }
};
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
+ { }
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);

361
target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch Normal file
View File

@ -0,0 +1,361 @@
From a8811ec764f95a04ba82f6f457e28c5e9e36e36b Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Fri, 13 Mar 2020 18:52:13 +0100
Subject: cpufreq: qcom: Add support for krait based socs
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
.../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
drivers/cpufreq/qcom-cpufreq-nvmem.c | 191 +++++++++++++++++++--
4 files changed, 183 insertions(+), 18 deletions(-)
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -19,7 +19,8 @@ In 'cpu' nodes:
In 'operating-points-v2' table:
- compatible: Should be
- - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+ - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
+ apq8064, ipq8064, msm8960 and ipq8074.
Optional properties:
--------------------
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -135,7 +135,7 @@ config ARM_OMAP2PLUS_CPUFREQ
config ARM_QCOM_CPUFREQ_NVMEM
tristate "Qualcomm nvmem based CPUFreq"
- depends on ARM64
+ depends on ARCH_QCOM
depends on QCOM_QFPROM
depends on QCOM_SMEM
select PM_OPP
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -138,6 +138,11 @@ static const struct of_device_id blackli
{ .compatible = "ti,am43", },
{ .compatible = "ti,dra7", },
+ { .compatible = "qcom,ipq8064", },
+ { .compatible = "qcom,apq8064", },
+ { .compatible = "qcom,msm8974", },
+ { .compatible = "qcom,msm8960", },
+
{ }
};
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -49,12 +49,14 @@ struct qcom_cpufreq_drv;
struct qcom_cpufreq_match_data {
int (*get_version)(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv);
const char **genpd_names;
};
struct qcom_cpufreq_drv {
- struct opp_table **opp_tables;
+ struct opp_table **names_opp_tables;
+ struct opp_table **hw_opp_tables;
struct opp_table **genpd_opp_tables;
u32 versions;
const struct qcom_cpufreq_match_data *data;
@@ -62,6 +64,84 @@ struct qcom_cpufreq_drv {
static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+static void get_krait_bin_format_a(struct device *cpu_dev,
+ int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse;
+
+ pte_efuse = *((u32 *)buf);
+
+ *speed = pte_efuse & 0xf;
+ if (*speed == 0xf)
+ *speed = (pte_efuse >> 4) & 0xf;
+
+ if (*speed == 0xf) {
+ *speed = 0;
+ dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed);
+ } else {
+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+ }
+
+ *pvs = (pte_efuse >> 10) & 0x7;
+ if (*pvs == 0x7)
+ *pvs = (pte_efuse >> 13) & 0x7;
+
+ if (*pvs == 0x7) {
+ *pvs = 0;
+ dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs);
+ } else {
+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+ }
+}
+
+static void get_krait_bin_format_b(struct device *cpu_dev,
+ int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse, redundant_sel;
+
+ pte_efuse = *((u32 *)buf);
+ redundant_sel = (pte_efuse >> 24) & 0x7;
+
+ *pvs_ver = (pte_efuse >> 4) & 0x3;
+
+ switch (redundant_sel) {
+ case 1:
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+ *speed = (pte_efuse >> 27) & 0xf;
+ break;
+ case 2:
+ *pvs = (pte_efuse >> 27) & 0xf;
+ *speed = pte_efuse & 0x7;
+ break;
+ default:
+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+ *speed = pte_efuse & 0x7;
+ }
+
+ /* Check SPEED_BIN_BLOW_STATUS */
+ if (pte_efuse & BIT(3)) {
+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+ } else {
+ dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n");
+ *speed = 0;
+ }
+
+ /* Check PVS_BLOW_STATUS */
+ pte_efuse = *(((u32 *)buf) + 4);
+ pte_efuse &= BIT(21);
+ if (pte_efuse) {
+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+ } else {
+ dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n");
+ *pvs = 0;
+ }
+
+ dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
+}
+
static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
{
size_t len;
@@ -93,11 +173,13 @@ static enum _msm8996_version qcom_cpufre
static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv)
{
size_t len;
u8 *speedbin;
enum _msm8996_version msm8996_version;
+ *pvs_name = NULL;
msm8996_version = qcom_cpufreq_get_msm_id();
if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
@@ -125,10 +207,51 @@ static int qcom_cpufreq_kryo_name_versio
return 0;
}
+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
+ struct qcom_cpufreq_drv *drv)
+{
+ int speed = 0, pvs = 0, pvs_ver = 0;
+ u8 *speedbin;
+ size_t len;
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+
+ if (IS_ERR(speedbin))
+ return PTR_ERR(speedbin);
+
+ switch (len) {
+ case 4:
+ get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ break;
+ case 8:
+ get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ break;
+ default:
+ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
+ return -ENODEV;
+ }
+
+ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
+ speed, pvs, pvs_ver);
+
+ drv->versions = (1 << speed);
+
+ kfree(speedbin);
+ return 0;
+}
+
static const struct qcom_cpufreq_match_data match_data_kryo = {
.get_version = qcom_cpufreq_kryo_name_version,
};
+static const struct qcom_cpufreq_match_data match_data_krait = {
+ .get_version = qcom_cpufreq_krait_name_version,
+};
+
static const char *qcs404_genpd_names[] = { "cpr", NULL };
static const struct qcom_cpufreq_match_data match_data_qcs404 = {
@@ -141,6 +264,7 @@ static int qcom_cpufreq_probe(struct pla
struct nvmem_cell *speedbin_nvmem;
struct device_node *np;
struct device *cpu_dev;
+ char *pvs_name = "speedXX-pvsXX-vXX";
unsigned cpu;
const struct of_device_id *match;
int ret;
@@ -153,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla
if (!np)
return -ENOENT;
- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
@@ -181,7 +305,8 @@ static int qcom_cpufreq_probe(struct pla
goto free_drv;
}
- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+ ret = drv->data->get_version(cpu_dev,
+ speedbin_nvmem, &pvs_name, drv);
if (ret) {
nvmem_cell_put(speedbin_nvmem);
goto free_drv;
@@ -190,12 +315,20 @@ static int qcom_cpufreq_probe(struct pla
}
of_node_put(np);
- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+ drv->names_opp_tables = kcalloc(num_possible_cpus(),
+ sizeof(*drv->names_opp_tables),
GFP_KERNEL);
- if (!drv->opp_tables) {
+ if (!drv->names_opp_tables) {
ret = -ENOMEM;
goto free_drv;
}
+ drv->hw_opp_tables = kcalloc(num_possible_cpus(),
+ sizeof(*drv->hw_opp_tables),
+ GFP_KERNEL);
+ if (!drv->hw_opp_tables) {
+ ret = -ENOMEM;
+ goto free_opp_names;
+ }
drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
sizeof(*drv->genpd_opp_tables),
@@ -213,11 +346,23 @@ static int qcom_cpufreq_probe(struct pla
}
if (drv->data->get_version) {
- drv->opp_tables[cpu] =
- dev_pm_opp_set_supported_hw(cpu_dev,
- &drv->versions, 1);
- if (IS_ERR(drv->opp_tables[cpu])) {
- ret = PTR_ERR(drv->opp_tables[cpu]);
+
+ if (pvs_name) {
+ drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
+ cpu_dev,
+ pvs_name);
+ if (IS_ERR(drv->names_opp_tables[cpu])) {
+ ret = PTR_ERR(drv->names_opp_tables[cpu]);
+ dev_err(cpu_dev, "Failed to add OPP name %s\n",
+ pvs_name);
+ goto free_opp;
+ }
+ }
+
+ drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
+ cpu_dev, &drv->versions, 1);
+ if (IS_ERR(drv->hw_opp_tables[cpu])) {
+ ret = PTR_ERR(drv->hw_opp_tables[cpu]);
dev_err(cpu_dev,
"Failed to set supported hardware\n");
goto free_genpd_opp;
@@ -259,11 +404,18 @@ free_genpd_opp:
kfree(drv->genpd_opp_tables);
free_opp:
for_each_possible_cpu(cpu) {
- if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+ if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu]))
+ break;
+ dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
+ }
+ for_each_possible_cpu(cpu) {
+ if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu]))
break;
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
}
- kfree(drv->opp_tables);
+ kfree(drv->hw_opp_tables);
+free_opp_names:
+ kfree(drv->names_opp_tables);
free_drv:
kfree(drv);
@@ -278,13 +430,16 @@ static int qcom_cpufreq_remove(struct pl
platform_device_unregister(cpufreq_dt_pdev);
for_each_possible_cpu(cpu) {
- if (drv->opp_tables[cpu])
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ if (drv->names_opp_tables[cpu])
+ dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
+ if (drv->hw_opp_tables[cpu])
+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
if (drv->genpd_opp_tables[cpu])
dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
}
- kfree(drv->opp_tables);
+ kfree(drv->names_opp_tables);
+ kfree(drv->hw_opp_tables);
kfree(drv->genpd_opp_tables);
kfree(drv);
@@ -303,6 +458,10 @@ static const struct of_device_id qcom_cp
{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+ { .compatible = "qcom,ipq8064", .data = &match_data_krait },
+ { .compatible = "qcom,apq8064", .data = &match_data_krait },
+ { .compatible = "qcom,msm8974", .data = &match_data_krait },
+ { .compatible = "qcom,msm8960", .data = &match_data_krait },
{},
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_match_list);

26
target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch Normal file
View File

@ -0,0 +1,26 @@
From 2dea651680cea1f3a29925de51002f33d1f55711 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Fri, 1 May 2020 00:22:25 +0200
Subject: cpufreq: qcom: fix wrong compatible binding
Binding in Documentation is still "operating-points-v2-kryo-cpu".
Restore the old binding to fix the compatibility problem.
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla
if (!np)
return -ENOENT;
- ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;

228
target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch Normal file
View File

@ -0,0 +1,228 @@
From 6a114526af4689938863bf34976c83bfd279f517 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Mon, 15 Jun 2020 23:06:02 +0200
Subject: PCI: qcom: Use bulk clk api and assert on error
Rework 2.1.0 revision to use bulk clk api and fix missing assert on
reset_control_deassert error.
Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 131 ++++++++++++---------------------
1 file changed, 46 insertions(+), 85 deletions(-)
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -99,12 +99,9 @@
#define SLV_ADDR_SPACE_SZ 0x10000000
#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
+#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
- struct clk *phy_clk;
- struct clk *aux_clk;
- struct clk *ref_clk;
+ struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
struct reset_control *pci_reset;
struct reset_control *axi_reset;
struct reset_control *ahb_reset;
@@ -244,25 +241,21 @@ static int qcom_pcie_get_resources_2_1_0
if (ret)
return ret;
- res->iface_clk = devm_clk_get(dev, "iface");
- if (IS_ERR(res->iface_clk))
- return PTR_ERR(res->iface_clk);
-
- res->core_clk = devm_clk_get(dev, "core");
- if (IS_ERR(res->core_clk))
- return PTR_ERR(res->core_clk);
-
- res->phy_clk = devm_clk_get(dev, "phy");
- if (IS_ERR(res->phy_clk))
- return PTR_ERR(res->phy_clk);
-
- res->aux_clk = devm_clk_get_optional(dev, "aux");
- if (IS_ERR(res->aux_clk))
- return PTR_ERR(res->aux_clk);
-
- res->ref_clk = devm_clk_get_optional(dev, "ref");
- if (IS_ERR(res->ref_clk))
- return PTR_ERR(res->ref_clk);
+ res->clks[0].id = "iface";
+ res->clks[1].id = "core";
+ res->clks[2].id = "phy";
+ res->clks[3].id = "aux";
+ res->clks[4].id = "ref";
+
+ /* iface, core, phy are required */
+ ret = devm_clk_bulk_get(dev, 3, res->clks);
+ if (ret < 0)
+ return ret;
+
+ /* aux, ref are optional */
+ ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3);
+ if (ret < 0)
+ return ret;
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
if (IS_ERR(res->pci_reset))
@@ -292,17 +285,13 @@ static void qcom_pcie_deinit_2_1_0(struc
{
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
- clk_disable_unprepare(res->phy_clk);
+ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
reset_control_assert(res->pci_reset);
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);
reset_control_assert(res->ext_reset);
reset_control_assert(res->phy_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->aux_clk);
- clk_disable_unprepare(res->ref_clk);
writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
@@ -334,47 +323,45 @@ static int qcom_pcie_init_2_1_0(struct q
return ret;
}
- ret = reset_control_assert(res->ahb_reset);
+ ret = reset_control_deassert(res->ahb_reset);
if (ret) {
- dev_err(dev, "cannot assert ahb reset\n");
- goto err_assert_ahb;
+ dev_err(dev, "cannot deassert ahb reset\n");
+ goto err_deassert_ahb;
}
- ret = clk_prepare_enable(res->iface_clk);
+ ret = reset_control_deassert(res->ext_reset);
if (ret) {
- dev_err(dev, "cannot prepare/enable iface clock\n");
- goto err_assert_ahb;
+ dev_err(dev, "cannot deassert ext reset\n");
+ goto err_deassert_ext;
}
- ret = clk_prepare_enable(res->core_clk);
+ ret = reset_control_deassert(res->phy_reset);
if (ret) {
- dev_err(dev, "cannot prepare/enable core clock\n");
- goto err_clk_core;
+ dev_err(dev, "cannot deassert phy reset\n");
+ goto err_deassert_phy;
}
- ret = clk_prepare_enable(res->aux_clk);
+ ret = reset_control_deassert(res->pci_reset);
if (ret) {
- dev_err(dev, "cannot prepare/enable aux clock\n");
- goto err_clk_aux;
+ dev_err(dev, "cannot deassert pci reset\n");
+ goto err_deassert_pci;
}
- ret = clk_prepare_enable(res->ref_clk);
+ ret = reset_control_deassert(res->por_reset);
if (ret) {
- dev_err(dev, "cannot prepare/enable ref clock\n");
- goto err_clk_ref;
+ dev_err(dev, "cannot deassert por reset\n");
+ goto err_deassert_por;
}
- ret = reset_control_deassert(res->ahb_reset);
+ ret = reset_control_deassert(res->axi_reset);
if (ret) {
- dev_err(dev, "cannot deassert ahb reset\n");
- goto err_deassert_ahb;
+ dev_err(dev, "cannot deassert axi reset\n");
+ goto err_deassert_axi;
}
- ret = reset_control_deassert(res->ext_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ext reset\n");
- goto err_deassert_ahb;
- }
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
+ if (ret)
+ goto err_clks;
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
@@ -406,36 +393,6 @@ static int qcom_pcie_init_2_1_0(struct q
val |= PHY_REFCLK_SSP_EN;
writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot deassert phy reset\n");
- return ret;
- }
-
- ret = reset_control_deassert(res->pci_reset);
- if (ret) {
- dev_err(dev, "cannot deassert pci reset\n");
- return ret;
- }
-
- ret = reset_control_deassert(res->por_reset);
- if (ret) {
- dev_err(dev, "cannot deassert por reset\n");
- return ret;
- }
-
- ret = reset_control_deassert(res->axi_reset);
- if (ret) {
- dev_err(dev, "cannot deassert axi reset\n");
- return ret;
- }
-
- ret = clk_prepare_enable(res->phy_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_deassert_ahb;
- }
-
/* wait for clock acquisition */
usleep_range(1000, 1500);
@@ -448,15 +405,19 @@ static int qcom_pcie_init_2_1_0(struct q
return 0;
+err_clks:
+ reset_control_assert(res->axi_reset);
+err_deassert_axi:
+ reset_control_assert(res->por_reset);
+err_deassert_por:
+ reset_control_assert(res->pci_reset);
+err_deassert_pci:
+ reset_control_assert(res->phy_reset);
+err_deassert_phy:
+ reset_control_assert(res->ext_reset);
+err_deassert_ext:
+ reset_control_assert(res->ahb_reset);
err_deassert_ahb:
- clk_disable_unprepare(res->ref_clk);
-err_clk_ref:
- clk_disable_unprepare(res->aux_clk);
-err_clk_aux:
- clk_disable_unprepare(res->core_clk);
-err_clk_core:
- clk_disable_unprepare(res->iface_clk);
-err_assert_ahb:
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
return ret;

36
target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch Normal file
View File

@ -0,0 +1,36 @@
From 8df093fe2ae1717389df0dcdc620c02cc35abb21 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Mon, 15 Jun 2020 23:06:05 +0200
Subject: PCI: qcom: Add ipq8064 rev2 variant
Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
different offset based on the revision.
Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -368,7 +368,8 @@ static int qcom_pcie_init_2_1_0(struct q
val &= ~BIT(0);
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") ||
+ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
@@ -1328,6 +1329,7 @@ err_pm_runtime_put:
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },

74
target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch Normal file
View File

@ -0,0 +1,74 @@
From 51ed2c2b60265006bde7531d10993cf24def0aee Mon Sep 17 00:00:00 2001
From: Sham Muthayyan <smuthayy@codeaurora.org>
Date: Mon, 15 Jun 2020 23:06:07 +0200
Subject: PCI: qcom: Support pci speed set for ipq806x
Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to
some hardware limitations. Add support for speed setting defined by the
max-link-speed binding. If not defined the max speed is set to GEN2 by
default.
Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
Backported with light changes:
* One include is missing in kernel 5.4
drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include "../../pci.h"
#include "pcie-designware.h"
#define PCIE20_PARF_SYS_CTRL 0x00
@@ -98,6 +99,8 @@
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0
+
#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
struct qcom_pcie_resources_2_1_0 {
@@ -184,6 +187,7 @@ struct qcom_pcie {
struct phy *phy;
struct gpio_desc *reset;
const struct qcom_pcie_ops *ops;
+ int gen;
};
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
@@ -397,6 +401,11 @@ static int qcom_pcie_init_2_1_0(struct q
/* wait for clock acquisition */
usleep_range(1000, 1500);
+ if (pcie->gen == 1) {
+ val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+ val |= PCI_EXP_LNKSTA_CLS_2_5GB;
+ writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+ }
/* Set the Max TLP size to 2K, instead of using default of 4K */
writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
@@ -1261,6 +1270,10 @@ static int qcom_pcie_probe(struct platfo
goto err_pm_runtime_put;
}
+ pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node);
+ if (pcie->gen < 0)
+ pcie->gen = 2;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
pcie->parf = devm_ioremap_resource(dev, res);
if (IS_ERR(pcie->parf)) {

216
target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch Normal file
View File

@ -0,0 +1,216 @@
From caaa71fac36ec8c19145dbf8262a9b77ab09f1a1 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 4 Mar 2020 22:38:32 +0100
Subject: net: mdio: add ipq8064 mdio driver
Currently ipq806x soc use generic bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.
Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/Kconfig | 8 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-ipq8064.c | 166 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 175 insertions(+)
create mode 100644 drivers/net/phy/mdio-ipq8064.c
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -156,6 +156,14 @@ config MDIO_I2C
This is library mode.
+config MDIO_IPQ8064
+ tristate "Qualcomm IPQ8064 MDIO interface support"
+ depends on HAS_IOMEM && OF_MDIO
+ depends on MFD_SYSCON
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the IPQ8064 SoC
+
config MDIO_MOXART
tristate "MOXA ART MDIO interface support"
depends on ARCH_MOXART || COMPILE_TEST
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq8064.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Qualcomm IPQ8064 MDIO interface driver
+ *
+ * Copyright (C) 2019 Christian Lamparter <chunkeey@gmail.com>
+ * Copyright (C) 2020 Ansuel Smith <ansuelsmth@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+
+/* MII address register definitions */
+#define MII_ADDR_REG_ADDR 0x10
+#define MII_BUSY BIT(0)
+#define MII_WRITE BIT(1)
+#define MII_CLKRANGE_60_100M (0 << 2)
+#define MII_CLKRANGE_100_150M (1 << 2)
+#define MII_CLKRANGE_20_35M (2 << 2)
+#define MII_CLKRANGE_35_60M (3 << 2)
+#define MII_CLKRANGE_150_250M (4 << 2)
+#define MII_CLKRANGE_250_300M (5 << 2)
+#define MII_CLKRANGE_MASK GENMASK(4, 2)
+#define MII_REG_SHIFT 6
+#define MII_REG_MASK GENMASK(10, 6)
+#define MII_ADDR_SHIFT 11
+#define MII_ADDR_MASK GENMASK(15, 11)
+
+#define MII_DATA_REG_ADDR 0x14
+
+#define MII_MDIO_DELAY_USEC (1000)
+#define MII_MDIO_RETRY_MSEC (10)
+
+struct ipq8064_mdio {
+ struct regmap *base; /* NSS_GMAC0_BASE */
+};
+
+static int
+ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv)
+{
+ u32 busy;
+
+ return regmap_read_poll_timeout(priv->base, MII_ADDR_REG_ADDR, busy,
+ !(busy & MII_BUSY), MII_MDIO_DELAY_USEC,
+ MII_MDIO_RETRY_MSEC * USEC_PER_MSEC);
+}
+
+static int
+ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
+{
+ u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
+ struct ipq8064_mdio *priv = bus->priv;
+ u32 ret_val;
+ int err;
+
+ /* Reject clause 45 */
+ if (reg_offset & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+
+ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
+ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
+
+ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
+ usleep_range(8, 10);
+
+ err = ipq8064_mdio_wait_busy(priv);
+ if (err)
+ return err;
+
+ regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
+ return (int)ret_val;
+}
+
+static int
+ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
+{
+ u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;
+ struct ipq8064_mdio *priv = bus->priv;
+
+ /* Reject clause 45 */
+ if (reg_offset & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+
+ regmap_write(priv->base, MII_DATA_REG_ADDR, data);
+
+ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
+ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
+
+ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
+ usleep_range(8, 10);
+
+ return ipq8064_mdio_wait_busy(priv);
+}
+
+static int
+ipq8064_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct ipq8064_mdio *priv;
+ struct mii_bus *bus;
+ int ret;
+
+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "ipq8064_mdio_bus";
+ bus->read = ipq8064_mdio_read;
+ bus->write = ipq8064_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+ bus->parent = &pdev->dev;
+
+ priv = bus->priv;
+ priv->base = device_node_to_regmap(np);
+ if (IS_ERR(priv->base)) {
+ if (priv->base == ERR_PTR(-EPROBE_DEFER))
+ return -EPROBE_DEFER;
+
+ dev_err(&pdev->dev, "error getting device regmap, error=%pe\n",
+ priv->base);
+ return PTR_ERR(priv->base);
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, bus);
+ return 0;
+}
+
+static int
+ipq8064_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+
+ return 0;
+}
+
+static const struct of_device_id ipq8064_mdio_dt_ids[] = {
+ { .compatible = "qcom,ipq8064-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids);
+
+static struct platform_driver ipq8064_mdio_driver = {
+ .probe = ipq8064_mdio_probe,
+ .remove = ipq8064_mdio_remove,
+ .driver = {
+ .name = "ipq8064-mdio",
+ .of_match_table = ipq8064_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(ipq8064_mdio_driver);
+
+MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");

621
target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch Normal file
View File

@ -0,0 +1,621 @@
From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Fri, 17 Jul 2020 15:16:31 +0200
Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver
This has lost in the original push for the dwc3 qcom driver.
This is needed for ipq806x SoC as without this the usb ports
doesn't work at all.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
Light modification to Kconfig as some config are missing in kernel 5.4
drivers/phy/qualcomm/Kconfig | 10 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++
3 files changed, 582 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_IPQ806X_USB
+ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
+ depends on HAS_IOMEM
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ This option enables support for the Synopsis PHYs present inside the
+ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
+ both HS and SS PHY controllers.
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-
obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+/* USB QSCRATCH Hardware registers */
+#define QSCRATCH_GENERAL_CFG (0x08)
+#define HSUSB_PHY_CTRL_REG (0x10)
+
+/* PHY_CTRL_REG */
+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
+#define HSUSB_CTRL_COMMONONN BIT(11)
+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
+#define HSUSB_CTRL_CLAMP_EN BIT(7)
+#define HSUSB_CTRL_RETENABLEN BIT(1)
+#define HSUSB_CTRL_POR BIT(0)
+
+/* QSCRATCH_GENERAL_CFG */
+#define HSUSB_GCFG_XHCI_REV BIT(2)
+
+/* USB QSCRATCH Hardware registers */
+#define SSUSB_PHY_CTRL_REG (0x00)
+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
+#define CR_PROTOCOL_READ_REG (0x1c)
+#define CR_PROTOCOL_WRITE_REG (0x20)
+
+/* PHY_CTRL_REG */
+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
+
+/* SSPHY control registers - Does this need 0x30? */
+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
+
+/* SSPHY SoC version specific values */
+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
+/* Override value for transmit preemphasis */
+#define SSPHY_TX_DEEMPH_3_5DB 23
+/* Override value for mpll */
+#define SSPHY_MPLL_VALUE 0
+
+/* QSCRATCH PHY_PARAM_CTRL1 fields */
+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
+
+#define PHY_PARAM_CTRL1_MASK \
+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+/* RX OVRD IN HI bits */
+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
+#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
+#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
+#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
+
+/* TX OVRD DRV LO register bits */
+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
+#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
+#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
+#define TX_OVRD_DRV_LO_EN BIT(14)
+
+/* MPLL bits */
+#define SSPHY_MPLL_MASK GENMASK(8, 5)
+#define SSPHY_MPLL(x) ((x) << 5)
+
+/* SS CAP register bits */
+#define SS_CR_CAP_ADDR_REG BIT(0)
+#define SS_CR_CAP_DATA_REG BIT(0)
+#define SS_CR_READ_REG BIT(0)
+#define SS_CR_WRITE_REG BIT(0)
+
+struct usb_phy {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *xo_clk;
+ struct clk *ref_clk;
+ u32 rx_eq;
+ u32 tx_deamp_3_5db;
+ u32 mpll;
+};
+
+struct phy_drvdata {
+ struct phy_ops ops;
+ u32 clk_rate;
+};
+
+/**
+ * Write register and read back masked value to confirm it is written
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @offset - register offset.
+ * @mask - register bitmask specifying what should be updated
+ * @val - value to write.
+ */
+static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
+ u32 offset,
+ const u32 mask, u32 val)
+{
+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
+
+ tmp &= ~mask; /* retain other bits */
+ write_val = tmp | val;
+
+ writel(write_val, phy_dwc3->base + offset);
+
+ /* Read back to see if val was written */
+ tmp = readl(phy_dwc3->base + offset);
+ tmp &= mask; /* clear other bits */
+
+ if (tmp != val)
+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
+}
+
+static int wait_for_latch(void __iomem *addr)
+{
+ u32 retry = 10;
+
+ while (true) {
+ if (!readl(addr))
+ break;
+
+ if (--retry == 0)
+ return -ETIMEDOUT;
+
+ usleep_range(10, 20);
+ }
+
+ return 0;
+}
+
+/**
+ * Write SSPHY register
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to write.
+ * @val - value to write.
+ */
+static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
+ u32 addr, u32 val)
+{
+ int ret;
+
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_DATA_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+err_wait:
+ if (ret)
+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
+ return ret;
+}
+
+/**
+ * Read SSPHY register.
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to read.
+ */
+static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
+ u32 addr, u32 *val)
+{
+ int ret;
+
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ /*
+ * Due to hardware bug, first read of SSPHY register might be
+ * incorrect. Hence as workaround, SW should perform SSPHY register
+ * read twice, but use only second read and ignore first read.
+ */
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ /* throwaway read */
+ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
+
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
+
+err_wait:
+ return ret;
+}
+
+static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /*
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
+ */
+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
+
+ /* use core clock if external reference is not present */
+ if (!phy_dwc3->xo_clk)
+ val |= HSUSB_CTRL_USE_CLKCORE;
+
+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+
+ /* Disable (bypass) VBUS and ID filters */
+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
+
+ return 0;
+}
+
+static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 data;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /* reset phy */
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* clear REF_PAD if we don't have XO clk */
+ if (!phy_dwc3->xo_clk)
+ data &= ~SSUSB_CTRL_REF_USE_PAD;
+ else
+ data |= SSUSB_CTRL_REF_USE_PAD;
+
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* wait for ref clk to become stable, this can take up to 30ms */
+ msleep(30);
+
+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /*
+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
+ * in HS mode instead of SS mode. Workaround it by asserting
+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data |= (1 << 7);
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
+ if (ret)
+ goto err_phy_trans;
+
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~0xff0;
+ data |= 0x20;
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Fix RX Equalization setting as follows
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
+ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
+ ret = usb_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Set EQ and TX launch amplitudes as follows
+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
+ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
+ data |= 0x6E;
+ data |= TX_OVRD_DRV_LO_EN;
+ ret = usb_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ data = 0;
+ data &= ~SSPHY_MPLL_MASK;
+ data |= SSPHY_MPLL(phy_dwc3->mpll);
+ usb_ss_write_phycreg(phy_dwc3, 0x30, data);
+
+ /*
+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
+ * TX_FULL_SWING [26:20] amplitude to 110
+ * TX_DEEMPH_6DB [19:14] to 32
+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
+ * LOS_BIAS [7:3] to 9
+ */
+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
+
+ data &= ~PHY_PARAM_CTRL1_MASK;
+
+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
+
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
+ PHY_PARAM_CTRL1_MASK, data);
+
+err_phy_trans:
+ return ret;
+}
+
+static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ /* Sequence to put SSPHY in low power state:
+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
+ */
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_SS_PHY_EN, 0x0);
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
+ .ops = {
+ .init = qcom_ipq806x_usb_hs_phy_init,
+ .exit = qcom_ipq806x_usb_hs_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 60000000,
+};
+
+static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
+ .ops = {
+ .init = qcom_ipq806x_usb_ss_phy_init,
+ .exit = qcom_ipq806x_usb_ss_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 125000000,
+};
+
+static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
+ { .compatible = "qcom,ipq806x-usb-phy-hs",
+ .data = &qcom_ipq806x_usb_hs_drvdata },
+ { .compatible = "qcom,ipq806x-usb-phy-ss",
+ .data = &qcom_ipq806x_usb_ss_drvdata },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
+
+static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ resource_size_t size;
+ struct phy *generic_phy;
+ struct usb_phy *phy_dwc3;
+ const struct phy_drvdata *data;
+ struct phy_provider *phy_provider;
+
+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
+ if (!phy_dwc3)
+ return -ENOMEM;
+
+ data = of_device_get_match_data(&pdev->dev);
+
+ phy_dwc3->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ size = resource_size(res);
+ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
+
+ if (IS_ERR(phy_dwc3->base)) {
+ dev_err(phy_dwc3->dev, "failed to map reg\n");
+ return PTR_ERR(phy_dwc3->base);
+ }
+
+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
+ if (IS_ERR(phy_dwc3->ref_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
+ return PTR_ERR(phy_dwc3->ref_clk);
+ }
+
+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
+
+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
+ if (IS_ERR(phy_dwc3->xo_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
+ phy_dwc3->xo_clk = NULL;
+ }
+
+ /* Parse device node to probe HSIO settings */
+ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
+ &phy_dwc3->rx_eq))
+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
+
+ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
+ &phy_dwc3->tx_deamp_3_5db))
+ phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
+
+ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
+
+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
+
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy_dwc3);
+ platform_set_drvdata(pdev, phy_dwc3);
+
+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
+ of_phy_simple_xlate);
+
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static struct platform_driver qcom_ipq806x_usb_phy_driver = {
+ .probe = qcom_ipq806x_usb_phy_probe,
+ .driver = {
+ .name = "qcom-ipq806x-usb-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_ipq806x_usb_phy_table,
+ },
+};
+
+module_platform_driver(qcom_ipq806x_usb_phy_driver);
+
+MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");

31
target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch Normal file
View File

@ -0,0 +1,31 @@
From 3d7b0ca5300bd01b176f2b4c10e173db802560d8 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Tue, 21 Jul 2020 16:06:13 +0100
Subject: phy: qualcomm: fix setting of tx_deamp_3_5db when device property
read fails
Currently when reading of the device property for "qcom,tx-deamp_3_5db"
fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This
looks like a copy-n-paste error and in fact should be assigning the
default instead to phy_dwc3->tx_deamp_3_5db
Addresses-Coverity: ("Copy-paste error")
Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -531,7 +531,7 @@ static int qcom_ipq806x_usb_phy_probe(st
if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
&phy_dwc3->tx_deamp_3_5db))
- phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
phy_dwc3->mpll = SSPHY_MPLL_VALUE;

121
target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch Normal file
View File

@ -0,0 +1,121 @@
From: Christian Lamparter <chunkeey@googlemail.com>
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -183,6 +183,13 @@ config QCOM_SOCINFO
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TCSR_USB_PORT_SEL 0xb0
+
+static int tcsr_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct device_node *node = pdev->dev.of_node;
+ void __iomem *base;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
+ writel(val, base + TCSR_USB_PORT_SEL);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
+
+static struct platform_driver tcsr_driver = {
+ .driver = {
+ .name = "tcsr",
+ .owner = THIS_MODULE,
+ .of_match_table = tcsr_dt_match,
+ },
+ .probe = tcsr_probe,
+};
+
+module_platform_driver(tcsr_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,23 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
+#define __DT_BINDINGS_QCOM_TCSR_H
+
+#define TCSR_USB_SELECT_USB3_P0 0x1
+#define TCSR_USB_SELECT_USB3_P1 0x2
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
+
+/* TCSR A/B REG */
+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
+
+#endif

44
target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch Normal file
View File

@ -0,0 +1,44 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -865,6 +865,41 @@
reg = <0x12100000 0x10000>;
};
+ gsbi1: gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <1>;
+ reg = <0x12440000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi1_serial: serial@12450000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12450000 0x100>,
+ <0x12400000 0x03>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi1_i2c: i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;

37
target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch Normal file
View File

@ -0,0 +1,37 @@
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1840,6 +1840,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL
endchoice
+config CMDLINE_OVERRIDE
+ bool "Use alternative cmdline from device tree"
+ help
+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
+ be used, this is not a good option for kernels that are shared across
+ devices. This setting enables using "chosen/cmdline-override" as the
+ cmdline if it exists in the device tree.
+
config CMDLINE
string "Default kernel command string"
default ""
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns
if (p != NULL && l > 0)
strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
+ * device tree option of chosen/bootargs-override. This is
+ * helpful on boards where u-boot sets bootargs, and is unable
+ * to be modified.
+ */
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
+ if (p != NULL && l > 0)
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+#endif
+
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else
* managed to set the command line, unless CONFIG_CMDLINE_FORCE

12
target/linux/ipq806x/patches-5.10/997-device_tree_cmdline.patch Normal file
View File

@ -0,0 +1,12 @@
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+ p = of_get_flat_dt_prop(node, "bootargs-append", &l);
+ if (p != NULL && l > 0)
+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
/* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
* device tree option of chosen/bootargs-override. This is