From d3a62bea085ddd959d195671dcbeba9829e47dae Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 14 Nov 2021 19:45:31 +0100 Subject: [PATCH] realtek: Add Lexra bus clock The CPU peripherals on RTL83xx/RTL930x are connected to the CPU via the Lexra bus. This bus can provide a clock signal to these peripherals, but no clock driver is currently available. Instead, use a fixed-clock to provide the clock frequency, and update the dependent peripherals. Lexra bus clock frequencies: - RTL838x: 200MHz - RTL839x: 200MHz - RTL930x: 175MHz Signed-off-by: Sander Vanheule Tested-by: Stijn Segers Tested-by: Paul Fertser Tested-by: Stijn Tintel --- target/linux/realtek/dts-5.10/rtl838x.dtsi | 10 ++++++++-- target/linux/realtek/dts-5.10/rtl930x.dtsi | 11 +++++------ 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi index a33b6d899e2..dc60e12bad0 100644 --- a/target/linux/realtek/dts-5.10/rtl838x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi @@ -68,6 +68,12 @@ bootargs = "console=ttyS0,115200"; }; + lx_clk: lx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + cpuintc: cpuintc { compatible = "mti,cpu-interrupt-controller"; #address-cells = <0>; @@ -116,7 +122,7 @@ compatible = "ns16550a"; reg = <0x2000 0x100>; - clock-frequency = <200000000>; + clocks = <&lx_clk>; interrupt-parent = <&intc>; interrupts = <31>; @@ -134,7 +140,7 @@ compatible = "ns16550a"; reg = <0x2100 0x100>; - clock-frequency = <200000000>; + clocks = <&lx_clk>; interrupt-parent = <&intc>; interrupts = <30>; diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi index e53f506a956..9e9501d51ad 100644 --- a/target/linux/realtek/dts-5.10/rtl930x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi @@ -80,11 +80,10 @@ interrupt-controller; }; - osc: oscillator { + lx_clk: lx_clk { compatible = "fixed-clock"; - #clock-cells = <1>; + #clock-cells = <0>; clock-frequency = <175000000>; - clock-output-names = "osc"; }; soc: soc { @@ -119,7 +118,7 @@ interrupt-parent = <&intc>; interrupts = <8>; interrupt-names = "ostimer"; - clocks = <&osc 0>; + clocks = <&lx_clk>; }; spi0: spi@1200 { @@ -134,7 +133,7 @@ compatible = "ns16550a"; reg = <0x2000 0x100>; - clock-frequency = <175000000>; + clocks = <&lx_clk>; interrupt-parent = <&intc>; interrupts = <30>; @@ -149,7 +148,7 @@ compatible = "ns16550a"; reg = <0x2100 0x100>; - clock-frequency = <175000000>; + clocks = <&lx_clk>; interrupt-parent = <&intc>; interrupts = <31>;