ramips: introduce DTS for ALL5003

Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -59,6 +59,7 @@ case "$FIRMWARE" in
 	all0239-3g | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	argus-atp52b | \
 	bc2 | \
 	br6425 | \

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -41,6 +41,7 @@ ramips_setup_interfaces()
 	w150m | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	broadway | \
 	wnce2001)
 		ucidef_add_switch "switch0" "1" "0"

target/linux/ramips/base-files/lib/preinit/06_set_iface_mac

@@ -53,6 +53,7 @@ preinit_set_mac_address() {
 	all0239-3g |\
 	all0256n |\
 	all5002 |\
+	all5003 |\
 	carambola |\
 	dir-615-h1 |\
 	fonera20n |\

target/linux/ramips/base-files/lib/ramips.sh

@@ -48,9 +48,12 @@ ramips_board_detect() {
 	*"Allnet ALL0256N")
 		name="all0256n"
 		;;
-	*"Allnet ALL5002/ALL5003")
+	*"Allnet ALL5002")
 		name="all5002"
 		;;
+	*"Allnet ALL5003")
+		name="all5003"
+		;;
 	*"ARC FreeStation5")
 		name="freestation5"
 		;;
@@ -228,7 +231,7 @@ ramips_board_detect() {
 	esac
 
 	case "$machine" in
-	*"Allnet ALL5002/ALL5003")
+	*"Allnet ALL500"[23]*)
 		all500x_board_detect
 		;;
 	esac

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -22,6 +22,7 @@ platform_check_image() {
 	all0239-3g | \
 	all0256n | \
 	all5002 | \
+	all5003 | \
 	asl26555 | \
 	bc2 | \
 	broadway | \

target/linux/ramips/dts/ALL5002.dts

@@ -4,7 +4,7 @@
 
 / {
 	compatible = "ALL5002", "ralink,rt3352-soc";
-	model = "Allnet ALL5002/ALL5003";
+	model = "Allnet ALL5002";
 
 	palmbus@10000000 {
 		sysc@0 {

target/linux/ramips/dts/ALL5003.dts

@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "ALL5003", "ralink,rt5350-soc";
+	model = "Allnet ALL5003";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+			ralink,gpiomux = "i2c";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l25635e";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l25635e";
+				spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x1fb0000>;
+		};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x3f>;
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+
+		gpios = <&gpio0 1 0 &gpio0 2 0>;
+		i2c-gpio,delay-us = <10>;
+
+		pcf0: iexp@38 {
+			#gpio-cells = <2>;
+			compatible = "inxp,pcf8574a";
+			reg = <0x38>;
+			gpio-controller;
+		};
+
+		hwmon@4b {
+			compatible = "national,lm92";
+			reg = <0x4b>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		ld1 {
+			label = "allnet:green:ld1";
+			gpios = <&pcf0 0 1>;
+		};
+		ld2 {
+			label = "allnet:green:ld2";
+			gpios = <&pcf0 1 1>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -265,6 +265,7 @@ Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0
 
 allnet_all5002_mtd_size=33226752
 Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size))
+Image/Build/Profile/ALL5003=$(call BuildFirmware/CustomFlash/$(1),$(1),all5003,ALL5003,$(allnet_all5002_mtd_size))
 
 argus_atp52b_mtd_size=7995392
 Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
@@ -436,6 +437,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ALL02393G,$(1))
 	$(call Image/Build/Profile/ALL0256N,$(1))
 	$(call Image/Build/Profile/ALL5002,$(1))
+	$(call Image/Build/Profile/ALL5003,$(1))
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/ASL26555,$(1))
 	$(call Image/Build/Profile/BC2,$(1))

target/linux/ramips/rt305x/profiles/allnet.mk

@@ -40,3 +40,15 @@ define Profile/ALL5002/Description
 endef
 
 $(eval $(call Profile,ALL5002))
+
+define Profile/ALL5003
+	NAME:=Allnet ALL5003
+	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+	kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
+endef
+
+define Profile/ALL5003/Description
+	Package set for Allnet ALL5003
+endef
+
+$(eval $(call Profile,ALL5003))