ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-02 17:20:59 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

ath79: improve support for Letv LBA-047-CH

Browse Source 
1. Convert wireless calibration data to NVMEM.
2. Enable control green status LED and change default LED behaviors.
   The three LEDs of LBA-047-CH are in the same position, and the green
   LED will be completely covered by the other two LEDs. So don's use
   green LED as WAN indicator to ensure that only one LED is on at a time.
   LED     Factory          OpenWrt
   blue    internet fail    failsafe && upgrade
   green   internet okay    run
   red     boot             boot
3. Reduce the SPI clock to 30 MHz because the ath79 target does not
   support 50 MHz SPI operation well. Keep the fast-read support to
   ensure the spi-mem feature (b3f9842330) is enabled.
4. Remove unused package "uboot-envtools".
5. Split the factory image into two parts: rootfs and kernel.
   This change can reduce the factory image size and allow users to
   upgrade the OpenWrt kernel loader uImage (OKLI) independently.

   The new installation method: First, rename "squashfs-kernel.bin" to
   "openwrt-ar71xx-generic-ap147-16M-kernel.bin" and rename "rootfs.bin"
   to "openwrt-ar71xx-generic-ap147-16M-rootfs-squashfs.bin". Then we
   can press reset button for about 5 seconds to enter tftp download mode.
   Finally, set IP address to 192.168.67.100 and upload the above two
   parts via tftp server.

Tested on Letv LBA-047-CH

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
This commit is contained in:
Shiji Yang 2023-01-20 03:16:33 +00:00 committed by Hauke Mehrtens
parent 2a20dc717a
commit c7059c56a8
2 changed files with 44 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
target/linux/ath79/dts/qca9531_letv_lba-047-ch.dts
View File

@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
@ -11,11 +12,11 @@
compatible = "letv,lba-047-ch", "qca,qca9531";
aliases {
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_red;
label-mac-device = &eth0;
led-boot = &led_status_red;
led-failsafe = &led_status_blue;
led-running = &led_status_green;
led-upgrade = &led_status_blue;
};
keys {
@ -31,16 +32,24 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_wan_pin>;
led_status_blue: status_blue {
led_status_blue: led-0 {
label = "blue:status";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_status_red: status_red {
led_status_green: led-1 {
label = "green:status";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_status_red: led-2 {
label = "red:status";
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
@ -64,20 +73,13 @@
};
};
&pinmux {
/* GPIO 4: LED_LINK_5 (WAN) */
led_wan_pin: pinmux_led_wan_pin {
pinctrl-single,bits = <0x04 0x0000002d 0x000000ff>;
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <30000000>;
m25p,fast-read;
partitions {
@ -112,10 +114,26 @@
reg = <0xe90000 0x160000>;
};
art: partition@ff0000 {
partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
};
@ -140,19 +158,6 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};
&art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
nvmem-cells = <&cal_art_1000>;
nvmem-cell-names = "calibration";
};

10
target/linux/ath79/image/generic.mk
View File

@ -1645,13 +1645,15 @@ define Device/letv_lba-047-ch
SOC := qca9531
DEVICE_VENDOR := Letv
DEVICE_MODEL := LBA-047-CH
DEVICE_PACKAGES := -uboot-envtools
FACTORY_SIZE := 14528k
IMAGE_SIZE := 15936k
LOADER_FLASH_OFFS := 0x50000
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
append-loader-okli-uimage $(1) | pad-to 64k
IMAGES += kernel.bin rootfs.bin
IMAGE/kernel.bin := append-loader-okli-uimage $(1) | pad-to 64k
IMAGE/rootfs.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size $$$$(FACTORY_SIZE)
endef
TARGET_DEVICES += letv_lba-047-ch