diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index f6dbf30a587..ab077bff13d 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -158,7 +158,11 @@ ex2700) ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0" set_wifi_led "$board:green:router" ;; -f5d8235-v1|\ +f5d8235-v1) + ucidef_set_led_default "lan" "lan" "$board:blue:wired" "0" + set_usb_led "$board:blue:storage" + set_wifi_led "$board:blue:wireless" + ;; f5d8235-v2) set_usb_led "$board:blue:storage" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index e3e65506a96..0eaa440eb26 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -130,7 +130,6 @@ ramips_setup_interfaces() c50|\ dir-645|\ dir-860l-b1|\ - f5d8235-v1|\ f5d8235-v2|\ gl-mt300a|\ gl-mt300n|\ @@ -236,6 +235,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; + f5d8235-v1|\ tew-714tru|\ v11st-fe|\ wzr-agl300nh) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 6bcdc0f5bca..abbe147d840 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -126,6 +126,9 @@ get_status_led() { pbr-d1) status_led="$board:orange:power" ;; + f5d8235-v1) + status_led="$board:blue:wired" + ;; f5d8235-v2) status_led="$board:blue:router" ;; diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts index 74e423c2654..4d95860aa2c 100644 --- a/target/linux/ramips/dts/F5D8235_V1.dts +++ b/target/linux/ramips/dts/F5D8235_V1.dts @@ -2,6 +2,7 @@ #include "rt2880.dtsi" +#include #include / { @@ -12,7 +13,7 @@ cfi@1f000000 { compatible = "cfi-flash"; - reg = <0x1f000000 0x800000>; + reg = <0xbc400000 0x800000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; @@ -37,15 +38,15 @@ }; partition@50000 { - label = "linux"; - reg = <0x50000 0x3b0000>; + label = "firmware"; + reg = <0x50000 0x7b0000>; }; }; rtl8366s { compatible = "realtek,rtl8366s"; - gpio-sda = <&gpio0 1 0>; - gpio-sck = <&gpio0 2 0>; + gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>; + gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; gpio-keys-polled { @@ -56,13 +57,13 @@ wps { label = "wps"; - gpios = <&gpio0 0 1>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; - gpios = <&gpio0 9 1>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; linux,code = ; }; }; @@ -70,14 +71,69 @@ gpio-leds { compatible = "gpio-leds"; + internet { + label = "f5d8235-v1:blue:internet"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + internet2 { + label = "f5d8235-v1:amber:internet"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + modem { + label = "f5d8235-v1:blue:modem"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + modem2 { + label = "f5d8235-v1:amber:modem"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + router { + label = "f5d8235-v1:blue:router"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + storage { label = "f5d8235-v1:blue:storage"; - gpios = <&gpio0 7 1>; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; storage2 { - label = "f5d8235-v1:orange:storage"; - gpios = <&gpio0 8 1>; + label = "f5d8235-v1:amber:storage"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + security { + label = "f5d8235-v1:blue:security"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + security2 { + label = "f5d8235-v1:amber:security"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + wired { + label = "f5d8235-v1:blue:wired"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + + wired2 { + label = "f5d8235-v1:amber:wired"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + }; + + wireless { + label = "f5d8235-v1:blue:wireless"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + wireless2 { + label = "f5d8235-v1:amber:wireless"; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; }; }; }; @@ -89,7 +145,7 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,group = "spi", "i2c", "jtag", "mdio", "uartlite"; ralink,function = "gpio"; }; }; @@ -104,10 +160,7 @@ }; }; -/* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */ -/*&wmac { +&wmac { status = "okay"; - ralink,mtd-eeprom = <&u-boot 0x40000>; + ralink,mtd-eeprom = <&factory 0x0>; }; -*/ -