mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
mediatek: add support for JDCloud RE-CP-03
Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: 128GB eMMC RAM: 1GB DDR4 Ethernet: 4x 1GbE, 1x 2.5GbE (RTL8221B) Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Joylink Power: DC 12V 2A Flash instructions: 1. Download and flash the vendor migration firmware via webUI: https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7986-jdcloud_re-cp-03-vendor-migration.bin (Default address is 192.168.68.1, user root, no password) 2. After device has booted up, write new GPT table: dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Erase and write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=/dev/zero of=/dev/mmcblk0boot0 bs=512 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Erase and write new FIP: dd if=/dev/zero of=/dev/mmcblk0 bs=512 seek=13312 count=8192 conv=fsync dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. 9. Additionally, if you want to have eMMC recovery boot feature: (Don't worry! You will always have TFTP recovery boot feature.) dd if=openwrt-mediatek-filogic-jdcloud_re-cp-03-initramfs-recovery.itb of=/dev/mmcblk0p4 bs=512 conv=fsync Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
Hauke Mehrtens
parent
6fa4fbbc52
commit
c0c3234e17
@ -87,6 +87,11 @@ glinet,gl-mt6000)
|
||||
glinet,gl-mt3000)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
||||
;;
|
||||
jdcloud,re-cp-03)
|
||||
local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
|
||||
ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
|
||||
ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
|
||||
;;
|
||||
mercusys,mr90x-v1|\
|
||||
routerich,ax3000)
|
||||
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
|
||||
|
||||
294
target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts
Normal file
294
target/linux/mediatek/dts/mt7986a-jdcloud-re-cp-03.dts
Normal file
@ -0,0 +1,294 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2023 Tianling Shen <cnsztl@immortalwrt.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7986a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "JDCloud RE-CP-03";
|
||||
compatible = "jdcloud,re-cp-03", "mediatek,mt7986a";
|
||||
|
||||
aliases {
|
||||
led-boot = &red_led;
|
||||
led-failsafe = &red_led;
|
||||
led-running = &green_led;
|
||||
led-upgrade = &green_led;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-joylink {
|
||||
label = "joylink";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red_led: led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green_led: led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "2500base-x";
|
||||
phy-handle = <&phy6>;
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
phy6: phy@6 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <6>;
|
||||
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <50000>;
|
||||
realtek,aldps-enable;
|
||||
};
|
||||
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
hs400-ds-delay = <0x14014>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_pins_default: mmc0-pins-default {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc_51";
|
||||
};
|
||||
conf-cmd-dat {
|
||||
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
||||
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
||||
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>;
|
||||
};
|
||||
conf-clk {
|
||||
pins = "EMMC_CK";
|
||||
drive-strength = <6>;
|
||||
mediatek,pull-down-adv = <2>;
|
||||
};
|
||||
conf-ds {
|
||||
pins = "EMMC_DSL";
|
||||
mediatek,pull-down-adv = <2>;
|
||||
};
|
||||
conf-rst {
|
||||
pins = "EMMC_RSTB";
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0-uhs-pins {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc_51";
|
||||
};
|
||||
conf-cmd-dat {
|
||||
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
||||
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
||||
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>;
|
||||
};
|
||||
conf-clk {
|
||||
pins = "EMMC_CK";
|
||||
drive-strength = <6>;
|
||||
mediatek,pull-down-adv = <2>;
|
||||
};
|
||||
conf-ds {
|
||||
pins = "EMMC_DSL";
|
||||
mediatek,pull-down-adv = <2>;
|
||||
};
|
||||
conf-rst {
|
||||
pins = "EMMC_RSTB";
|
||||
drive-strength = <4>;
|
||||
mediatek,pull-up-adv = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf-2g-5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&trng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -24,6 +24,7 @@ mediatek_setup_interfaces()
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
|
||||
;;
|
||||
asus,tuf-ax4200|\
|
||||
jdcloud,re-cp-03|\
|
||||
mediatek,mt7981-rfb|\
|
||||
zbtlink,zbt-z8102ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
|
||||
@ -135,6 +136,11 @@ mediatek_setup_macs()
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
jdcloud,re-cp-03)
|
||||
wan_mac=$(mmc_get_mac_binary factory 0x2a)
|
||||
lan_mac=$(mmc_get_mac_binary factory 0x24)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
mercusys,mr90x-v1)
|
||||
label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
lan_mac=$label_mac
|
||||
|
||||
@ -72,7 +72,8 @@ case "$FIRMWARE" in
|
||||
CI_UBIPART="UBI_DEV"
|
||||
caldata_extract_ubi "Factory" 0x0 0x1000
|
||||
;;
|
||||
glinet,gl-mt6000)
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cp-03)
|
||||
caldata_extract_mmc "factory" 0x0 0x1000
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -80,6 +80,9 @@ case "$board" in
|
||||
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
jdcloud,re-cp-03)
|
||||
[ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
mercusys,mr90x-v1)
|
||||
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -134,6 +134,10 @@ platform_do_upgrade() {
|
||||
CI_KERNPART="fit"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
jdcloud,re-cp-03)
|
||||
CI_KERNPART="production"
|
||||
emmc_do_upgrade "$1"
|
||||
;;
|
||||
mercusys,mr90x-v1)
|
||||
CI_UBIPART="ubi0"
|
||||
nand_do_upgrade "$1"
|
||||
@ -200,6 +204,7 @@ platform_copy_config() {
|
||||
acer,predator-w6|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cp-03|\
|
||||
ubnt,unifi-6-plus)
|
||||
emmc_copy_config
|
||||
;;
|
||||
|
||||
@ -450,6 +450,32 @@ define Device/jcg_q30-pro
|
||||
endef
|
||||
TARGET_DEVICES += jcg_q30-pro
|
||||
|
||||
define Device/jdcloud_re-cp-03
|
||||
DEVICE_VENDOR := JDCloud
|
||||
DEVICE_MODEL := RE-CP-03
|
||||
DEVICE_DTS := mt7986a-jdcloud-re-cp-03
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_DTC_FLAGS := --pad 4096
|
||||
DEVICE_DTS_LOADADDR := 0x43f00000
|
||||
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware \
|
||||
e2fsprogs f2fsck mkf2fs
|
||||
KERNEL_LOADADDR := 0x44000000
|
||||
KERNEL := kernel-bin | gzip
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
||||
IMAGES := sysupgrade.itb
|
||||
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
||||
IMAGE/sysupgrade.itb := append-kernel | \
|
||||
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
||||
pad-rootfs | append-metadata
|
||||
ARTIFACTS :=gpt.bin preloader.bin bl31-uboot.fip
|
||||
ARTIFACT/gpt.bin := mt798x-gpt emmc
|
||||
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
|
||||
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot jdcloud_re-cp-03
|
||||
endef
|
||||
TARGET_DEVICES += jdcloud_re-cp-03
|
||||
|
||||
define Device/mediatek_mt7981-rfb
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MT7981 rfb
|
||||
|
||||
Loading…
Reference in New Issue
Block a user