mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
mediatek: move out-of-tree DTS files to dedicated dts folder
Use dedicated dts folder like on ramips to store device tree source files for boards not already supported in vanilla Linux. Doing so instead of having them in files-* has several advantages: * we don't need to duplicate them for several kernel versions * changes to a device tree don't trigger a complete kernel rebuild * the files are more obvious to find Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle
parent
8ad61118fd
commit
c067b1e79b
@ -31,7 +31,7 @@ mkfs_target_dir = $(if $(call param_get,pkg,$(1)),$(KDIR)/target-dir-$(call para
|
||||
|
||||
KDIR=$(KERNEL_BUILD_DIR)
|
||||
KDIR_TMP=$(KDIR)/tmp
|
||||
DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts
|
||||
DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts$$(if $$(DTS_VENDOR),/$$(DTS_VENDOR))
|
||||
|
||||
IMG_PREFIX_EXTRA:=$(if $(EXTRA_IMAGE_NAME),$(call sanitize,$(EXTRA_IMAGE_NAME))-)
|
||||
IMG_PREFIX_VERNUM:=$(if $(CONFIG_VERSION_FILENAMES),$(call sanitize,$(VERSION_NUMBER))-)
|
||||
@ -416,7 +416,7 @@ DEFAULT_DEVICE_VARS := \
|
||||
DEVICE_NAME KERNEL KERNEL_INITRAMFS KERNEL_INITRAMFS_IMAGE KERNEL_SIZE \
|
||||
CMDLINE UBOOTENV_IN_UBI KERNEL_IN_UBI BLOCKSIZE PAGESIZE SUBPAGESIZE \
|
||||
VID_HDR_OFFSET UBINIZE_OPTS UBINIZE_PARTS MKUBIFS_OPTS DEVICE_DTS \
|
||||
DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
|
||||
DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM DTS_VENDOR SOC BOARD_NAME \
|
||||
UIMAGE_MAGIC UIMAGE_NAME \
|
||||
SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
|
||||
UBOOT_PATH IMAGE_SIZE \
|
||||
|
||||
@ -59,11 +59,13 @@
|
||||
green {
|
||||
label = "bpi-r64:pio:green";
|
||||
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
red {
|
||||
label = "bpi-r64:pio:red";
|
||||
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
@ -459,7 +459,6 @@
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
@ -470,7 +469,6 @@
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -514,6 +512,8 @@
|
||||
spi-max-frequency = <104000000>;
|
||||
reg = <0>;
|
||||
|
||||
mediatek,bmt-v2;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
68
target/linux/mediatek/dts/mt7622-rfb1-ubi.dts
Normal file
68
target/linux/mediatek/dts/mt7622-rfb1-ubi.dts
Normal file
@ -0,0 +1,68 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7622-rfb1.dts"
|
||||
/ {
|
||||
model = "MT7622_MT7531 RFB (UBI)";
|
||||
compatible = "mediatek,mt7622,ubi";
|
||||
};
|
||||
|
||||
&snfi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial_nand_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
spi-max-frequency = <104000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Preloader";
|
||||
reg = <0x00000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ATF";
|
||||
reg = <0x80000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "Bootloader";
|
||||
reg = <0xc0000 0x0080000>;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "Config";
|
||||
reg = <0x140000 0x0080000>;
|
||||
};
|
||||
|
||||
factory: partition@1c0000 {
|
||||
label = "Factory";
|
||||
reg = <0x1c0000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x400000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "ubi";
|
||||
reg = <0x600000 0x1C00000>;
|
||||
};
|
||||
|
||||
partition@2200000 {
|
||||
label = "User_data";
|
||||
reg = <0x2200000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1,644 +0,0 @@
|
||||
/*
|
||||
* Copyright (c) 2018 MediaTek Inc.
|
||||
* Author: Ryder Lee <ryder.lee@mediatek.com>
|
||||
*
|
||||
* SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7622.dtsi"
|
||||
#include "mt6380.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MT7622_MT7531 RFB";
|
||||
compatible = "mediatek,mt7622,ubi";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
factory {
|
||||
label = "factory";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gsw: gsw@0 {
|
||||
compatible = "mediatek,mt753x";
|
||||
mediatek,ethsys = <ðsys>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
green {
|
||||
label = "bpi-r64:pio:green";
|
||||
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red {
|
||||
label = "bpi-r64:pio:red";
|
||||
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&bch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&btif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&irrx_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gsw {
|
||||
mediatek,mdio = <&mdio>;
|
||||
mediatek,portmap = "llllw";
|
||||
mediatek,mdio_master_pinmux = <0>;
|
||||
reset-gpios = <&pio 54 0>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
port5: port@5 {
|
||||
compatible = "mediatek,mt753x-port";
|
||||
reg = <5>;
|
||||
phy-mode = "rgmii";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
port6: port@6 {
|
||||
compatible = "mediatek,mt753x-port";
|
||||
reg = <6>;
|
||||
phy-mode = "sgmii";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&emmc_pins_default>;
|
||||
pinctrl-1 = <&emmc_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
max-frequency = <50000000>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
|
||||
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&sd0_pins_default>;
|
||||
pinctrl-1 = <&sd0_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
max-frequency = <50000000>;
|
||||
cap-sd-highspeed;
|
||||
r_smpl = <1>;
|
||||
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_3p3v>;
|
||||
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
|
||||
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
|
||||
};
|
||||
|
||||
&nandc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <¶llel_nand_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&nor_flash {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_nor_pins>;
|
||||
status = "disabled";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
|
||||
* SATA functions. i.e. output-high: PCIe, output-low: SATA
|
||||
*/
|
||||
asm_sel {
|
||||
gpio-hog;
|
||||
gpios = <90 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
/* eMMC is shared pin with parallel NAND */
|
||||
emmc_pins_default: emmc-pins-default {
|
||||
mux {
|
||||
function = "emmc", "emmc_rst";
|
||||
groups = "emmc";
|
||||
};
|
||||
|
||||
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
|
||||
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
|
||||
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
|
||||
*/
|
||||
conf-cmd-dat {
|
||||
pins = "NDL0", "NDL1", "NDL2",
|
||||
"NDL3", "NDL4", "NDL5",
|
||||
"NDL6", "NDL7", "NRB";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "NCLE";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pins_uhs: emmc-pins-uhs {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc";
|
||||
};
|
||||
|
||||
conf-cmd-dat {
|
||||
pins = "NDL0", "NDL1", "NDL2",
|
||||
"NDL3", "NDL4", "NDL5",
|
||||
"NDL6", "NDL7", "NRB";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "NCLE";
|
||||
drive-strength = <4>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
eth_pins: eth-pins {
|
||||
mux {
|
||||
function = "eth";
|
||||
groups = "mdc_mdio", "rgmii_via_gmac2";
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c1_0";
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c2_0";
|
||||
};
|
||||
};
|
||||
|
||||
i2s1_pins: i2s1-pins {
|
||||
mux {
|
||||
function = "i2s";
|
||||
groups = "i2s_out_mclk_bclk_ws",
|
||||
"i2s1_in_data",
|
||||
"i2s1_out_data";
|
||||
};
|
||||
|
||||
conf {
|
||||
pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
|
||||
"I2S_WS", "I2S_MCLK";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
irrx_pins: irrx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_rx";
|
||||
};
|
||||
};
|
||||
|
||||
irtx_pins: irtx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_tx";
|
||||
};
|
||||
};
|
||||
|
||||
/* Parallel nand is shared pin with eMMC */
|
||||
parallel_nand_pins: parallel-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "par_nand";
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_pins: pcie0-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie0_pad_perst",
|
||||
"pcie0_1_waken",
|
||||
"pcie0_1_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pcie1_pins: pcie1-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie1_pad_perst",
|
||||
"pcie1_0_waken",
|
||||
"pcie1_0_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_bus_pins: pmic-bus-pins {
|
||||
mux {
|
||||
function = "pmic";
|
||||
groups = "pmic_bus";
|
||||
};
|
||||
};
|
||||
|
||||
pwm7_pins: pwm1-2-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm_ch7_2";
|
||||
};
|
||||
};
|
||||
|
||||
wled_pins: wled-pins {
|
||||
mux {
|
||||
function = "led";
|
||||
groups = "wled";
|
||||
};
|
||||
};
|
||||
|
||||
sd0_pins_default: sd0-pins-default {
|
||||
mux {
|
||||
function = "sd";
|
||||
groups = "sd_0";
|
||||
};
|
||||
|
||||
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
|
||||
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
|
||||
* DAT2, DAT3, CMD, CLK for SD respectively.
|
||||
*/
|
||||
conf-cmd-data {
|
||||
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
||||
"I2S2_IN","I2S4_OUT";
|
||||
input-enable;
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
conf-clk {
|
||||
pins = "I2S3_OUT";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
conf-cd {
|
||||
pins = "TXD3";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
sd0_pins_uhs: sd0-pins-uhs {
|
||||
mux {
|
||||
function = "sd";
|
||||
groups = "sd_0";
|
||||
};
|
||||
|
||||
conf-cmd-data {
|
||||
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
||||
"I2S2_IN","I2S4_OUT";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "I2S3_OUT";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
/* Serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
spic0_pins: spic0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic0_0";
|
||||
};
|
||||
};
|
||||
|
||||
spic1_pins: spic1-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic1_0";
|
||||
};
|
||||
};
|
||||
|
||||
/* SPI-NOR is shared pin with serial NAND */
|
||||
spi_nor_pins: spi-nor-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "spi_nor";
|
||||
};
|
||||
};
|
||||
|
||||
/* serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart0_0_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_1_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog_pins: watchdog-pins {
|
||||
mux {
|
||||
function = "watchdog";
|
||||
groups = "watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm7_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwrap {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_bus_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
&snfi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial_nand_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
spi-max-frequency = <104000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Preloader";
|
||||
reg = <0x00000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ATF";
|
||||
reg = <0x80000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "Bootloader";
|
||||
reg = <0xc0000 0x0080000>;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "Config";
|
||||
reg = <0x140000 0x0080000>;
|
||||
};
|
||||
|
||||
factory: partition@1c0000 {
|
||||
label = "Factory";
|
||||
reg = <0x1c0000 0x0040000>;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x400000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "ubi";
|
||||
reg = <0x600000 0x1C00000>;
|
||||
};
|
||||
|
||||
partition@2200000 {
|
||||
label = "User_data";
|
||||
reg = <0x2200000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&watchdog_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,10 +1,10 @@
|
||||
DTS_VENDOR := mediatek
|
||||
KERNEL_LOADADDR := 0x44080000
|
||||
|
||||
define Device/bpi_bananapi-r64
|
||||
DEVICE_VENDOR := Bpi
|
||||
DEVICE_MODEL := Banana Pi R64
|
||||
DEVICE_DTS := mt7622-bananapi-bpi-r64
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
SUPPORTED_DEVICES := bananapi,bpi-r64
|
||||
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
|
||||
endef
|
||||
@ -14,7 +14,7 @@ define Device/bpi_bananapi-r64-rootdisk
|
||||
DEVICE_VENDOR := Bpi
|
||||
DEVICE_MODEL := Banana Pi R64 (rootdisk)
|
||||
DEVICE_DTS := mt7622-bananapi-bpi-r64-rootdisk
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
SUPPORTED_DEVICES := bananapi,bpi-r64
|
||||
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
|
||||
IMAGES := sysupgrade-emmc.bin.gz
|
||||
@ -26,7 +26,7 @@ define Device/elecom_wrc-2533gent
|
||||
DEVICE_VENDOR := Elecom
|
||||
DEVICE_MODEL := WRC-2533GENT
|
||||
DEVICE_DTS := mt7622-elecom-wrc-2533gent
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-mt7615e \
|
||||
kmod-mt7615-firmware kmod-btmtkuart swconfig
|
||||
endef
|
||||
@ -36,7 +36,6 @@ define Device/mediatek_mt7622-rfb1
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MTK7622 rfb1 AP
|
||||
DEVICE_DTS := mt7622-rfb1
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
|
||||
endef
|
||||
TARGET_DEVICES += mediatek_mt7622-rfb1
|
||||
@ -45,7 +44,7 @@ define Device/mediatek_mt7622-ubi
|
||||
DEVICE_VENDOR := MediaTek
|
||||
DEVICE_MODEL := MTK7622 AP (UBI)
|
||||
DEVICE_DTS := mt7622-rfb1-ubi
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
@ -63,7 +62,7 @@ define Device/ubnt_unifi-6-lr
|
||||
DEVICE_VENDOR := Ubiquiti
|
||||
DEVICE_MODEL := UniFi 6 LR
|
||||
DEVICE_DTS := mt7622-ubnt-unifi-6-lr
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7915e
|
||||
endef
|
||||
TARGET_DEVICES += ubnt_unifi-6-lr
|
||||
|
||||
Loading…
Reference in New Issue
Block a user