diff --git a/target/linux/lantiq/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/ase/base-files/lib/preinit/05_set_preinit_iface_lantiq
similarity index 100%
rename from target/linux/lantiq/base-files/lib/preinit/05_set_preinit_iface_lantiq
rename to target/linux/lantiq/ase/base-files/lib/preinit/05_set_preinit_iface_lantiq
diff --git a/target/linux/lantiq/ase/config-5.10 b/target/linux/lantiq/ase/config-5.10
index 7007016ddef..195e49df692 100644
--- a/target/linux/lantiq/ase/config-5.10
+++ b/target/linux/lantiq/ase/config-5.10
@@ -16,6 +16,7 @@ CONFIG_NLS=y
CONFIG_SGL_ALLOC=y
CONFIG_SOC_AMAZON_SE=y
CONFIG_SOC_TYPE_XWAY=y
+CONFIG_SWCONFIG=y
CONFIG_TARGET_ISA_REV=1
CONFIG_USB=y
CONFIG_USB_COMMON=y
diff --git a/target/linux/lantiq/ase/config-5.4 b/target/linux/lantiq/ase/config-5.4
index 9e4d0470595..34187d809e9 100644
--- a/target/linux/lantiq/ase/config-5.4
+++ b/target/linux/lantiq/ase/config-5.4
@@ -16,6 +16,7 @@ CONFIG_NLS=y
CONFIG_SGL_ALLOC=y
CONFIG_SOC_AMAZON_SE=y
# CONFIG_SOC_XWAY is not set
+CONFIG_SWCONFIG=y
CONFIG_TARGET_ISA_REV=1
CONFIG_USB=y
CONFIG_USB_COMMON=y
diff --git a/target/linux/lantiq/config-5.10 b/target/linux/lantiq/config-5.10
index a630b9db26b..70f240d7795 100644
--- a/target/linux/lantiq/config-5.10
+++ b/target/linux/lantiq/config-5.10
@@ -129,7 +129,6 @@ CONFIG_LANTIQ_DT_NONE=y
# CONFIG_LANTIQ_ETOP is not set
CONFIG_LANTIQ_WDT=y
# CONFIG_LANTIQ_XRX200 is not set
-# CONFIG_LANTIQ_XRX200_LEGACY is not set
CONFIG_LEDS_GPIO=y
CONFIG_LIBFDT=y
CONFIG_LLD_VERSION=0
@@ -211,7 +210,6 @@ CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SRCU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
@@ -228,4 +226,3 @@ CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-# CONFIG_XRX200_PHY_FW is not set
diff --git a/target/linux/lantiq/config-5.4 b/target/linux/lantiq/config-5.4
index 7398a23489d..5112a9b5ec9 100644
--- a/target/linux/lantiq/config-5.4
+++ b/target/linux/lantiq/config-5.4
@@ -130,7 +130,6 @@ CONFIG_LANTIQ_DT_NONE=y
# CONFIG_LANTIQ_ETOP is not set
CONFIG_LANTIQ_WDT=y
# CONFIG_LANTIQ_XRX200 is not set
-# CONFIG_LANTIQ_XRX200_LEGACY is not set
CONFIG_LEDS_GPIO=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
@@ -207,7 +206,6 @@ CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SRCU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
@@ -224,4 +222,3 @@ CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-# CONFIG_XRX200_PHY_FW is not set
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
index 22d5509a33f..27858be28fb 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi
@@ -120,22 +120,6 @@
ranges = <0x0 0x203000 0x100>;
big-endian;
- gphy0: gphy@20 {
- compatible = "lantiq,xrx200-gphy";
- reg = <0x20 0x4>;
-
- resets = <&reset0 31 30>, <&reset1 7 7>;
- reset-names = "gphy", "gphy2";
- };
-
- gphy1: gphy@68 {
- compatible = "lantiq,xrx200-gphy";
- reg = <0x68 0x4>;
-
- resets = <&reset0 29 28>, <&reset1 6 6>;
- reset-names = "gphy", "gphy2";
- };
-
reset0: reset-controller@10 {
compatible = "lantiq,xrx200-reset";
reg = <0x10 4>, <0x14 4>;
@@ -446,22 +430,71 @@
};
};
- eth0: eth@e108000 {
+ gswip: switch@e108000 {
+ compatible = "lantiq,xrx200-gswip";
#address-cells = <1>;
#size-cells = <0>;
+ reg = < 0xe108000 0x3000 /* switch */
+ 0xe10b100 0x70 /* mdio */
+ 0xe10b1d8 0x30 /* mii */
+ >;
+
+ dsa,member = <0 0>;
+
+ gswip_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@6 {
+ reg = <0x6>;
+ label = "cpu";
+ ethernet = <ð0>;
+ };
+ };
+
+ gswip_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ };
+
+ gphy-fw {
+ compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
+ lantiq,rcu = <&rcu0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gphy0: gphy@20 {
+ reg = <0x20>;
+
+ resets = <&reset0 31 30>;
+ reset-names = "gphy";
+ };
+
+ gphy1: gphy@68 {
+ reg = <0x68>;
+
+ resets = <&reset0 29 28>;
+ reset-names = "gphy";
+ };
+ };
+ };
+
+ eth0: eth@e10b308 {
compatible = "lantiq,xrx200-net";
- reg = < 0xe108000 0x3000 /* switch */
- 0xe10b100 0x70 /* mdio */
- 0xe10b1d8 0x30 /* mii */
- 0xe10b308 0x30 /* pmac */
- >;
+ reg = <0xe10b308 0x30>; /* pmac */
interrupt-parent = <&icu0>;
- interrupts = <75 73 72>;
- resets = <&reset0 21 16>, <&reset0 8 8>;
- reset-names = "switch", "ppe";
- lantiq,phys = <&gphy0>, <&gphy1>;
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
+ interrupts = <73>, <72>;
+ interrupt-names = "tx", "rx";
+ resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>;
+ reset-names = "switch", "ppe", "ppe_dsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
mei@e116000 {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
index 84a2a934283..77fcff33920 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts
@@ -69,46 +69,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
-
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
-
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
@@ -117,6 +77,32 @@
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
+&gswip_mdio {
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ };
+};
+
+&gswip_ports {
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy14>;
+ };
+};
+
&localbus {
flash@0 {
compatible = "lantiq,nor";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
index c924a2b2751..4b7343207ee 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts
@@ -94,72 +94,7 @@
};
ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&boardconfig 0x16>;
};
&gphy0 {
@@ -183,6 +118,62 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy14>;
+ };
+};
+
&localbus {
flash@0 {
compatible = "lantiq,nor";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts
index e7c55321459..fb771edcb7e 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts
@@ -54,56 +54,6 @@
};
};
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
- <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- lantiq,switch;
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -112,6 +62,44 @@
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
+&gswip {
+ pinctrl-0 = <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
+ <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+};
+
+&gswip_ports {
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+};
+
&localbus {
flash@0 {
compatible = "lantiq,nor";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
index 696a61a861c..8faf335c02b 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
@@ -107,78 +107,7 @@
};
ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>,
- <&gphy1_led0_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "mii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&boardconfig 0x16>;
};
&gphy0 {
@@ -203,6 +132,64 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led0_pins>,
+ <&gphy1_led0_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy14>;
+ };
+};
+
&localbus {
flash@0 {
compatible = "lantiq,nor";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
index 08d9148fafd..7c3ab53d732 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi
@@ -127,76 +127,8 @@
};
ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
- pinctrl-names = "default";
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
};
&gphy0 {
@@ -221,6 +153,62 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&localbus {
flash@0 {
compatible = "lantiq,nor";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
index 09c95375d50..664327a8612 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi
@@ -114,72 +114,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -208,6 +142,61 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+};
+
&pcie0 {
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
index 09c97a64541..c4b92f9f910 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
@@ -106,72 +106,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -207,6 +141,61 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+};
+
&spi {
status = "okay";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
index c7e600aace2..dafff26f1b8 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi
@@ -81,71 +81,8 @@
};
ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&urlader 0xa91>;
- mtd-mac-address-increment = <(-2)>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rmii";
- phy-handle = <&phy0>;
- };
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rmii";
- phy-handle = <&phy1>;
- };
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x00>;
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x01>;
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&urlader 0xa91>;
+ mtd-mac-address-increment = <(-2)>;
};
&gphy0 {
@@ -171,6 +108,61 @@
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x00>;
+ reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x01>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rmii";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+};
+
&pcie0 {
status = "okay";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts
index 3b1703dd3c8..a9d20915ea3 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts
@@ -181,33 +181,17 @@
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
-ð0 {
- lantiq,phys = <&gphy0>;
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
+&gswip_mdio {
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+};
+
+&gswip_ports {
+ port@2 {
+ reg = <2>;
+ label = "lan";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
};
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
index 3894fecb434..3be20e1ff04 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts
@@ -185,70 +185,6 @@
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
-
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
-
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
-
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
-
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -262,6 +198,48 @@
};
};
+&gswip_mdio {
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ };
+};
+
+&gswip_ports {
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy14>;
+ };
+};
+
&usb_phy0 {
status = "okay";
};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
index f817b3a41b4..e24ee787f13 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts
@@ -114,74 +114,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -215,6 +147,62 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&localbus {
flash@1 {
compatible = "lantiq,nand-xway";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
index 8917d359e7b..eea27a2a1f3 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts
@@ -152,64 +152,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
@@ -237,6 +179,48 @@
};
};
+&gswip_mdio {
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ };
+};
+
+&gswip_ports {
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy14>;
+ };
+};
+
&spi {
status = "okay";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
index 9cac3e6ec05..8df81111fa2 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi
@@ -97,83 +97,6 @@
};
};
-ð0 {
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- lantiq,wan;
-
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -210,6 +133,62 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&spi {
status = "okay";
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts
index be4810c4314..b817ff3224e 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts
@@ -83,37 +83,23 @@
};
};
-ð0 {
- lantiq,phys = <&gphy1>;
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
+&gswip_mdio {
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
};
};
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
+&gswip_ports {
+ port@4 {
+ reg = <4>;
+ label = "lan";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
};
&pcie0 {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
index d33b817f2d7..10389e539fb 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -110,66 +110,7 @@
};
ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&ath9k_cal 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&ath9k_cal 0xf100>;
};
&gphy0 {
@@ -199,6 +140,54 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ // reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan2";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan1";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
index aa76f66267f..d3d89078602 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi
@@ -100,66 +100,7 @@
};
ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&romfile 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
+ mtd-mac-address = <&romfile 0xf100>;
};
&gphy0 {
@@ -189,6 +130,54 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ // reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "lan4";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
index ee951dc3be7..ff7dce3477a 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi
@@ -110,80 +110,6 @@
};
};
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led1_pins>, <&gphy0_led2_pins>,
- <&gphy1_led1_pins>, <&gphy1_led2_pins>;
- pinctrl-names = "default";
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
@@ -221,6 +147,64 @@
};
};
+&gswip {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led1_pins>, <&gphy0_led2_pins>,
+ <&gphy1_led1_pins>, <&gphy1_led2_pins>;
+ pinctrl-names = "default";
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+};
+
&pci0 {
status = "okay";
diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk
index cebdf46e129..e269aacd024 100644
--- a/target/linux/lantiq/image/tp-link.mk
+++ b/target/linux/lantiq/image/tp-link.mk
@@ -1,5 +1,10 @@
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
+define Device/dsa-migration
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
define Device/lantiqTpLink
DEVICE_VENDOR := TP-Link
TPLINK_HWREVADD := 0
@@ -13,6 +18,7 @@ define Device/lantiqTpLink
endef
define Device/tplink_tdw8970
+ $(Device/dsa-migration)
$(Device/lantiqTpLink)
DEVICE_MODEL := TD-W8970
DEVICE_VARIANT := v1
@@ -26,6 +32,7 @@ endef
TARGET_DEVICES += tplink_tdw8970
define Device/tplink_tdw8980
+ $(Device/dsa-migration)
$(Device/lantiqTpLink)
DEVICE_MODEL := TD-W8980
DEVICE_VARIANT := v1
@@ -39,6 +46,7 @@ endef
TARGET_DEVICES += tplink_tdw8980
define Device/tplink_vr200
+ $(Device/dsa-migration)
$(Device/lantiqTpLink)
DEVICE_MODEL := Archer VR200
DEVICE_VARIANT := v1
@@ -52,6 +60,7 @@ endef
TARGET_DEVICES += tplink_vr200
define Device/tplink_vr200v
+ $(Device/dsa-migration)
$(Device/lantiqTpLink)
DEVICE_MODEL := Archer VR200v
DEVICE_VARIANT := v1
diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk
index d8cabea9724..5bc31314f80 100644
--- a/target/linux/lantiq/image/vr9.mk
+++ b/target/linux/lantiq/image/vr9.mk
@@ -1,6 +1,12 @@
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+define Device/dsa-migration
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
define Device/alphanetworks_asl56026
+ $(Device/dsa-migration)
DEVICE_VENDOR := Alpha
DEVICE_MODEL := ASL56026
DEVICE_ALT0_VENDOR := BT Openreach
@@ -10,6 +16,7 @@ endef
TARGET_DEVICES += alphanetworks_asl56026
define Device/arcadyan_arv7519rw22
+ $(Device/dsa-migration)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := ARV7519RW22
DEVICE_ALT0_VENDOR := Orange
@@ -26,6 +33,7 @@ endef
TARGET_DEVICES += arcadyan_arv7519rw22
define Device/arcadyan_vg3503j
+ $(Device/dsa-migration)
DEVICE_VENDOR := BT Openreach
DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
IMAGE_SIZE := 8000k
@@ -34,6 +42,7 @@ endef
TARGET_DEVICES += arcadyan_vg3503j
define Device/arcadyan_vgv7510kw22-brn
+ $(Device/dsa-migration)
$(Device/lantiqBrnImage)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := VGV7510KW22
@@ -51,6 +60,7 @@ endef
TARGET_DEVICES += arcadyan_vgv7510kw22-brn
define Device/arcadyan_vgv7510kw22-nor
+ $(Device/dsa-migration)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := VGV7510KW22
DEVICE_VARIANT := NOR
@@ -64,6 +74,7 @@ endef
TARGET_DEVICES += arcadyan_vgv7510kw22-nor
define Device/arcadyan_vgv7519-brn
+ $(Device/dsa-migration)
$(Device/lantiqBrnImage)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := VGV7519
@@ -81,6 +92,7 @@ endef
TARGET_DEVICES += arcadyan_vgv7519-brn
define Device/arcadyan_vgv7519-nor
+ $(Device/dsa-migration)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := VGV7519
DEVICE_VARIANT := NOR
@@ -94,6 +106,7 @@ endef
TARGET_DEVICES += arcadyan_vgv7519-nor
define Device/avm_fritz3370
+ $(Device/dsa-migration)
$(Device/AVM)
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 3370
@@ -107,6 +120,7 @@ define Device/avm_fritz3370
endef
define Device/avm_fritz3370-rev2-hynix
+ $(Device/dsa-migration)
$(Device/avm_fritz3370)
DEVICE_MODEL := FRITZ!Box 3370
DEVICE_VARIANT := Rev. 2 (Hynix NAND)
@@ -114,6 +128,7 @@ endef
TARGET_DEVICES += avm_fritz3370-rev2-hynix
define Device/avm_fritz3370-rev2-micron
+ $(Device/dsa-migration)
$(Device/avm_fritz3370)
DEVICE_MODEL := FRITZ!Box 3370
DEVICE_VARIANT := Rev. 2 (Micron NAND)
@@ -121,6 +136,7 @@ endef
TARGET_DEVICES += avm_fritz3370-rev2-micron
define Device/avm_fritz3390
+ $(Device/dsa-migration)
$(Device/AVM)
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 3390
@@ -132,6 +148,7 @@ endef
TARGET_DEVICES += avm_fritz3390
define Device/avm_fritz7360sl
+ $(Device/dsa-migration)
$(Device/AVM)
DEVICE_MODEL := FRITZ!Box 7360 SL
IMAGE_SIZE := 15744k
@@ -141,6 +158,7 @@ endef
TARGET_DEVICES += avm_fritz7360sl
define Device/avm_fritz7360-v2
+ $(Device/dsa-migration)
$(Device/AVM)
DEVICE_MODEL := FRITZ!Box 7360
DEVICE_VARIANT := v2
@@ -150,6 +168,7 @@ endef
TARGET_DEVICES += avm_fritz7360-v2
define Device/avm_fritz7362sl
+ $(Device/dsa-migration)
$(Device/AVM)
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 7362 SL
@@ -160,6 +179,7 @@ endef
TARGET_DEVICES += avm_fritz7362sl
define Device/avm_fritz7412
+ $(Device/dsa-migration)
$(Device/AVM)
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 7412
@@ -171,6 +191,7 @@ endef
TARGET_DEVICES += avm_fritz7412
define Device/avm_fritz7430
+ $(Device/dsa-migration)
$(Device/AVM)
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 7430
@@ -181,6 +202,7 @@ endef
TARGET_DEVICES += avm_fritz7430
define Device/bt_homehub-v5a
+ $(Device/dsa-migration)
$(Device/NAND)
DEVICE_VENDOR := British Telecom
DEVICE_MODEL := Home Hub 5
@@ -193,6 +215,7 @@ endef
TARGET_DEVICES += bt_homehub-v5a
define Device/buffalo_wbmr-300hpd
+ $(Device/dsa-migration)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WBMR-300HPD
IMAGE_SIZE := 15616k
@@ -202,6 +225,7 @@ endef
TARGET_DEVICES += buffalo_wbmr-300hpd
define Device/lantiq_easy80920-nand
+ $(Device/dsa-migration)
$(Device/lantiqFullImage)
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := VR9 EASY80920
@@ -212,6 +236,7 @@ endef
TARGET_DEVICES += lantiq_easy80920-nand
define Device/lantiq_easy80920-nor
+ $(Device/dsa-migration)
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := VR9 EASY80920
DEVICE_VARIANT := NOR
@@ -221,6 +246,7 @@ endef
TARGET_DEVICES += lantiq_easy80920-nor
define Device/netgear_dm200
+ $(Device/dsa-migration)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DM200
IMAGES := sysupgrade.bin factory.img
@@ -236,6 +262,7 @@ endef
TARGET_DEVICES += netgear_dm200
define Device/zyxel_p-2812hnu-f1
+ $(Device/dsa-migration)
$(Device/NAND)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := P-2812HNU
@@ -248,6 +275,7 @@ endef
TARGET_DEVICES += zyxel_p-2812hnu-f1
define Device/zyxel_p-2812hnu-f3
+ $(Device/dsa-migration)
$(Device/NAND)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := P-2812HNU
diff --git a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
deleted file mode 100644
index 4265eeca577..00000000000
--- a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Sun, 7 Jul 2019 21:45:51 +0200
-Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes
-
-Switch back to the former used names, to make the legacy switch driver
-happy.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/lantiq/xway/sysctrl.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -469,9 +469,9 @@ void __init ltq_soc_init(void)
-
- if (of_machine_is_compatible("lantiq,grx390") ||
- of_machine_is_compatible("lantiq,ar10")) {
-- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0);
-- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1);
-- clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2);
-+ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY0);
-+ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY1);
-+ clkdev_add_pmu("1f2030ac.gphy", NULL, 1, 0, PMU_GPHY2);
- clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P);
- clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P);
- /* rc 0 */
-@@ -503,7 +503,7 @@ void __init ltq_soc_init(void)
- } else if (of_machine_is_compatible("lantiq,grx390")) {
- clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
- ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
-- clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3);
-+ clkdev_add_pmu("1f203264.gphy", NULL, 1, 0, PMU_GPHY3);
- clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
- clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
- /* rc 2 */
-@@ -511,7 +511,7 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
- clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
- clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- } else if (of_machine_is_compatible("lantiq,ar10")) {
-@@ -519,7 +519,7 @@ void __init ltq_soc_init(void)
- ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
- clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
- clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH |
- PMU_PPE_DP | PMU_PPE_TC);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
-@@ -540,12 +540,12 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
-
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0,
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0,
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_PPE_TOP);
-- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
-- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch b/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
deleted file mode 100644
index d95e36caad8..00000000000
--- a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
+++ /dev/null
@@ -1,3473 +0,0 @@
-From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver
-
----
- drivers/net/ethernet/Kconfig | 8 +-
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_pce.h | 163 +++
- drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++
- 5 files changed, 3297 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -107,7 +107,13 @@ config LANTIQ_ETOP
- tristate "Lantiq SoC ETOP driver"
- depends on SOC_TYPE_XWAY
- help
-- Support for the MII0 inside the Lantiq SoC
-+ Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200_LEGACY
-+ tristate "Lantiq SoC XRX200 driver"
-+ depends on SOC_TYPE_XWAY
-+ help
-+ Support for the MII0 inside the Lantiq VDSL SoC
-
- config LANTIQ_XRX200
- tristate "Lantiq / Intel xRX200 PMAC network driver"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
- obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
-+obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+ OUT_MAC0 = 0,
-+ OUT_MAC1,
-+ OUT_MAC2,
-+ OUT_MAC3,
-+ OUT_MAC4,
-+ OUT_MAC5,
-+ OUT_ETHTYP,
-+ OUT_VTAG0,
-+ OUT_VTAG1,
-+ OUT_ITAG0,
-+ OUT_ITAG1, /*10 */
-+ OUT_ITAG2,
-+ OUT_ITAG3,
-+ OUT_IP0,
-+ OUT_IP1,
-+ OUT_IP2,
-+ OUT_IP3,
-+ OUT_SIP0,
-+ OUT_SIP1,
-+ OUT_SIP2,
-+ OUT_SIP3, /*20*/
-+ OUT_SIP4,
-+ OUT_SIP5,
-+ OUT_SIP6,
-+ OUT_SIP7,
-+ OUT_DIP0,
-+ OUT_DIP1,
-+ OUT_DIP2,
-+ OUT_DIP3,
-+ OUT_DIP4,
-+ OUT_DIP5, /*30*/
-+ OUT_DIP6,
-+ OUT_DIP7,
-+ OUT_SESID,
-+ OUT_PROT,
-+ OUT_APP0,
-+ OUT_APP1,
-+ OUT_IGMP0,
-+ OUT_IGMP1,
-+ OUT_IPOFF, /*39*/
-+ OUT_NONE = 63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR 0
-+#define IPV6 1
-+#define LENACCU 2
-+
-+/* parser's microcode flag type */
-+enum {
-+ FLAG_ITAG = 0,
-+ FLAG_VLAN,
-+ FLAG_SNAP,
-+ FLAG_PPPOE,
-+ FLAG_IPV6,
-+ FLAG_IPV6FL,
-+ FLAG_IPV4,
-+ FLAG_IGMP,
-+ FLAG_TU,
-+ FLAG_HOP,
-+ FLAG_NN1, /*10 */
-+ FLAG_NN2,
-+ FLAG_END,
-+ FLAG_NO, /*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+ unsigned short val[4];
-+/* unsigned short val_2;
-+ unsigned short val_1;
-+ unsigned short val_0;*/
-+} pce_microcode[] = {
-+ /* value mask ns fields L type flags ipv4_len */
-+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
-+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
-+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
-+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c
-@@ -0,0 +1,1930 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/switch.h>
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/if_vlan.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_legacy.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+
-+#ifdef SW_ROUTING
-+#define XRX200_MAX_DEV 2
-+#else
-+#define XRX200_MAX_DEV 1
-+#endif
-+
-+#define XRX200_MAX_VLAN 64
-+#define XRX200_PCE_ACTVLAN_IDX 0x01
-+#define XRX200_PCE_VLANMAP_IDX 0x02
-+
-+#define XRX200_MAX_PORT 7
-+#define XRX200_MAX_DMA 8
-+
-+#define XRX200_HEADROOM 4
-+
-+#define XRX200_TX_TIMEOUT (10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY 1
-+#define XRX200_PORT_TYPE_MAC 2
-+
-+/* DMA */
-+#define XRX200_DMA_DATA_LEN 0x600
-+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX 0
-+#define XRX200_DMA_TX 1
-+#define XRX200_DMA_TX_2 3
-+#define XRX200_DMA_IS_TX(x) (x%2)
-+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0 0x2A00
-+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0 0x2F00
-+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0 0x200
-+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB 0x0000
-+#define MDIO_CTRL 0x0020
-+#define MDIO_READ 0x0024
-+#define MDIO_WRITE 0x0028
-+#define MDIO_PHY0 0x0054
-+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0 0x002C
-+#define MDIO_CLK_CFG1 0x0030
-+
-+#define MDIO_GLOB_ENABLE 0x8000
-+#define MDIO_BUSY BIT(12)
-+#define MDIO_RD BIT(11)
-+#define MDIO_WR BIT(10)
-+#define MDIO_MASK 0x1f
-+#define MDIO_ADDRSHIFT 5
-+#define MDIO1_25MHZ 9
-+
-+#define MDIO_PHY_LINK_DOWN 0x4000
-+#define MDIO_PHY_LINK_UP 0x2000
-+
-+#define MDIO_PHY_SPEED_M10 0x0000
-+#define MDIO_PHY_SPEED_M100 0x0800
-+#define MDIO_PHY_SPEED_G1 0x1000
-+
-+#define MDIO_PHY_FDUP_EN 0x0200
-+#define MDIO_PHY_FDUP_DIS 0x0600
-+
-+#define MDIO_PHY_LINK_MASK 0x6000
-+#define MDIO_PHY_SPEED_MASK 0x1800
-+#define MDIO_PHY_FDUP_MASK 0x0600
-+#define MDIO_PHY_ADDR_MASK 0x001f
-+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p) (p * 8)
-+
-+#define MII_CFG_EN BIT(14)
-+
-+#define MII_CFG_MODE_MIIP 0x0
-+#define MII_CFG_MODE_MIIM 0x1
-+#define MII_CFG_MODE_RMIIP 0x2
-+#define MII_CFG_MODE_RMIIM 0x3
-+#define MII_CFG_MODE_RGMII 0x4
-+#define MII_CFG_MODE_MASK 0xf
-+
-+#define MII_CFG_RATE_M2P5 0x00
-+#define MII_CFG_RATE_M25 0x10
-+#define MII_CFG_RATE_M125 0x20
-+#define MII_CFG_RATE_M50 0x30
-+#define MII_CFG_RATE_AUTO 0x40
-+#define MII_CFG_RATE_MASK 0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL 0x0000
-+#define PMAC_RX_IPG 0x0024
-+#define PMAC_EWAN 0x002c
-+
-+#define PMAC_IPG_MASK 0xf
-+#define PMAC_HD_CTL_AS 0x0008
-+#define PMAC_HD_CTL_AC 0x0004
-+#define PMAC_HD_CTL_RC 0x0010
-+#define PMAC_HD_CTL_RXSH 0x0040
-+#define PMAC_HD_CTL_AST 0x0080
-+#define PMAC_HD_CTL_RST 0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK 0x1120
-+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR 0x1138
-+#define PCE_TBL_CTRL 0x113c
-+#define PCE_PMAP1 0x114c
-+#define PCE_PMAP2 0x1150
-+#define PCE_PMAP3 0x1154
-+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK 0x1f
-+#define PCE_TBL_CFG_ADWR 0x20
-+#define PCE_TBL_CFG_ADWR_MASK 0x60
-+#define PCE_INGRESS BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG (0x2314)
-+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p) (0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT 24
-+#define DPID_SHIFT 16
-+#define DPID_ENABLE 1
-+#define SPID_CPU_PORT 2
-+#define PORT_MAP_SEL BIT(15)
-+#define PORT_MAP_EN BIT(14)
-+#define PORT_MAP_SHIFT 1
-+#define PORT_MAP_MASK 0x3f
-+
-+#define SPPID_MASK 0x7
-+#define SPPID_SHIFT 4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE (-1)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+struct xrx200_port {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+
-+ int link;
-+ int gpio;
-+ enum of_gpio_flags gpio_flags;
-+
-+ struct phy_device *phydev;
-+ struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+ int idx;
-+ int refcount;
-+ int tx_free;
-+
-+ struct net_device dummy_dev;
-+ struct net_device *devs[XRX200_MAX_DEV];
-+
-+ struct tasklet_struct tasklet;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+
-+ spinlock_t lock;
-+};
-+
-+struct xrx200_hw {
-+ struct clk *clk;
-+ struct mii_bus *mii_bus;
-+ u8 phy_addr[XRX200_MAX_PORT];
-+
-+ struct xrx200_chan chan[XRX200_MAX_DMA];
-+ u16 vlan_vid[XRX200_MAX_VLAN];
-+ u16 vlan_port_map[XRX200_MAX_VLAN];
-+
-+ struct net_device *devs[XRX200_MAX_DEV];
-+ int num_devs;
-+
-+ int port_map[XRX200_MAX_PORT];
-+ unsigned short wan_map;
-+
-+ struct switch_dev swdev;
-+};
-+
-+struct xrx200_priv {
-+ struct net_device_stats stats;
-+ int id;
-+
-+ struct xrx200_port port[XRX200_MAX_PORT];
-+ int num_port;
-+ bool wan;
-+ bool sw;
-+ unsigned short port_map;
-+ unsigned char mac[6];
-+
-+ struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+#define XRX200_GLOBAL_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_global_attr, \
-+ .get = xrx200_get_global_attr
-+
-+#define XRX200_PORT_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_port_attr, \
-+ .get = xrx200_get_port_attr
-+
-+static int xrx200sw_read_x(int reg, int x)
-+{
-+ int value, mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ value = ltq_switch_r32(addr);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ value = (value >> xrx200sw_reg[reg].shift);
-+
-+ return (value & mask);
-+}
-+
-+static int xrx200sw_read(int reg)
-+{
-+ return xrx200sw_read_x(reg, 0);
-+}
-+
-+static void xrx200sw_write_x(int value, int reg, int x)
-+{
-+ int mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ mask = (mask << xrx200sw_reg[reg].shift);
-+ value = (value << xrx200sw_reg[reg].shift) & mask;
-+
-+ ltq_switch_w32_mask(mask, value, addr);
-+}
-+
-+static void xrx200sw_write(int value, int reg)
-+{
-+ xrx200sw_write_x(value, reg, 0);
-+}
-+
-+struct xrx200_pce_table_entry {
-+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
-+ int table; // PCE_TBL_CTRL.ADDR = pData->table
-+ unsigned short key[8];
-+ unsigned short val[5];
-+ unsigned short mask;
-+ unsigned short type;
-+ unsigned short valid;
-+ unsigned short gmap;
-+};
-+
-+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based read)
-+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // read the keys
-+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
-+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
-+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
-+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
-+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
-+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
-+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
-+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
-+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
-+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
-+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
-+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ return 0;
-+}
-+
-+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based write)
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ // read the keys
-+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
-+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
-+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
-+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
-+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
-+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
-+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
-+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
-+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
-+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
-+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
-+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ return 0;
-+}
-+
-+static void xrx200sw_fixup_pvids(void)
-+{
-+ int index, p, portmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+ struct xrx200_pce_table_entry tev;
-+
-+ portmap = 0;
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ portmap |= BIT(p);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (index = XRX200_MAX_VLAN; index-- > 0;)
-+ {
-+ tev.index = index;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.valid == 0)
-+ continue;
-+
-+ tem.index = index;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (untagged & BIT(p))
-+ {
-+ portmap &= ~BIT(p);
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (portmap & BIT(p))
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+}
-+
-+// swconfig interface
-+static void xrx200_hw_init(struct xrx200_hw *hw);
-+
-+// global
-+static int xrx200sw_reset_switch(struct switch_dev *dev)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ xrx200_hw_init(hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ int p;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++) {
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
-+ }
-+
-+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
-+ return 0;
-+}
-+
-+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write(val->value.i, attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+// vlan
-+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+ int i;
-+ struct xrx200_pce_table_entry tev;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tev.index = i;
-+ xrx200_pce_table_entry_read(&tev);
-+ if (tev.key[0] == val->value.i && i != val->port_vlan)
-+ return -EINVAL;
-+ }
-+
-+ hw->vlan_vid[val->port_vlan] = val->value.i;
-+
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ tev.key[0] = val->value.i;
-+ tev.valid = val->value.i > 0;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ tem.val[0] = val->value.i;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry te;
-+
-+ te.table = XRX200_PCE_ACTVLAN_IDX;
-+ te.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&te);
-+ val->value.i = te.key[0];
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+ int i, portmap, tagmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+
-+ portmap = 0;
-+ tagmap = 0;
-+ for (i = 0; i < val->len; i++)
-+ {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ portmap |= (1 << p->id);
-+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
-+ tagmap |= (1 << p->id);
-+ }
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+
-+ untagged = portmap ^ tagmap;
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tem.index = i;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
-+ return -EINVAL;
-+ }
-+
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ // auto-enable this vlan if not enabled already
-+ if (tem.val[0] == 0)
-+ {
-+ struct switch_val v;
-+ v.port_vlan = val->port_vlan;
-+ v.value.i = val->port_vlan;
-+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
-+ return -EINVAL;
-+
-+ //read updated tem
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ }
-+
-+ tem.val[1] = portmap;
-+ tem.val[2] = tagmap;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2);
-+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3);
-+ hw->vlan_port_map[val->port_vlan] = portmap;
-+
-+ xrx200sw_fixup_pvids();
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i;
-+ unsigned short ports, tags;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ ports = tem.val[1];
-+ tags = tem.val[2];
-+
-+ for (i = 0; i < XRX200_MAX_PORT; i++) {
-+ struct switch_port *p;
-+
-+ if (!(ports & (1 << i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (tags & (1 << i))
-+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
-+ else
-+ p->flags = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.key[0] == 0)
-+ return -EINVAL;
-+
-+ tev.valid = val->value.i;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ val->value.i = tev.valid;
-+
-+ return 0;
-+}
-+
-+// port
-+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ *val = tev.key[0];
-+ return 0;
-+}
-+
-+static int xrx200sw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
-+ if (!link->link)
-+ return 0;
-+
-+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
-+
-+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
-+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
-+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
-+
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ return switch_generic_set_link(dev, port, link);
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val);
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg);
-+
-+static int xrx200sw_phy_read16(struct switch_dev *dev, int addr, u8 reg, u16 *value)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ *value = xrx200_mdio_rd(hw->mii_bus, hw->phy_addr[addr], reg);
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_phy_write16(struct switch_dev *dev, int addr, u8 reg, u16 value)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ return xrx200_mdio_wr(hw->mii_bus, hw->phy_addr[addr], reg, value);
-+}
-+
-+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+// attributes
-+static struct switch_attr xrx200sw_globals[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .set = xrx200_set_vlan_mode_enable,
-+ .get = xrx200_get_vlan_mode_enable,
-+ .name = "enable_vlan",
-+ .description = "Enable VLAN mode",
-+ .max = 1},
-+};
-+
-+static struct switch_attr xrx200sw_port[] = {
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
-+ .name = "uvr",
-+ .description = "Unknown VLAN Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
-+ .name = "vsr",
-+ .description = "VLAN Security Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
-+ .name = "vinr",
-+ .description = "VLAN Ingress Tag Rule",
-+ .max = 2,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
-+ .name = "tvm",
-+ .description = "Transparent VLAN Mode",
-+ .max = 1,
-+ },
-+};
-+
-+static struct switch_attr xrx200sw_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = xrx200sw_set_vlan_vid,
-+ .get = xrx200sw_get_vlan_vid,
-+ .max = 4094,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable",
-+ .description = "Enable VLAN",
-+ .set = xrx200sw_set_vlan_enable,
-+ .get = xrx200sw_get_vlan_enable,
-+ .max = 1,
-+ },
-+};
-+
-+static const struct switch_dev_ops xrx200sw_ops = {
-+ .attr_global = {
-+ .attr = xrx200sw_globals,
-+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
-+ },
-+ .attr_port = {
-+ .attr = xrx200sw_port,
-+ .n_attr = ARRAY_SIZE(xrx200sw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = xrx200sw_vlan,
-+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
-+ },
-+ .get_vlan_ports = xrx200sw_get_vlan_ports,
-+ .set_vlan_ports = xrx200sw_set_vlan_ports,
-+ .get_port_pvid = xrx200sw_get_port_pvid,
-+ .reset_switch = xrx200sw_reset_switch,
-+ .get_port_link = xrx200sw_get_port_link,
-+ .set_port_link = xrx200sw_set_port_link,
-+// .get_port_stats = xrx200sw_get_port_stats, //TODO
-+ .phy_read16 = xrx200sw_phy_read16,
-+ .phy_write16 = xrx200sw_phy_write16,
-+};
-+
-+static int xrx200sw_init(struct xrx200_hw *hw)
-+{
-+ int netdev_num;
-+
-+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
-+ {
-+ struct switch_dev *swdev;
-+ struct net_device *dev = hw->devs[netdev_num];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ if (!priv->sw)
-+ continue;
-+
-+ swdev = &hw->swdev;
-+
-+ swdev->name = "Lantiq XRX200 Switch";
-+ swdev->vlans = XRX200_MAX_VLAN;
-+ swdev->ports = XRX200_MAX_PORT;
-+ swdev->cpu_port = 6;
-+ swdev->ops = &xrx200sw_ops;
-+
-+ register_switch(swdev, dev);
-+ return 0; // enough switches
-+ }
-+ return 0;
-+}
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_bh(&priv->hw->chan[i].lock);
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_enable(&priv->hw->chan[i].napi);
-+ ltq_dma_open(&priv->hw->chan[i].dma);
-+ ltq_dma_enable_irq(&priv->hw->chan[i].dma);
-+ }
-+ priv->hw->chan[i].refcount++;
-+ spin_unlock_bh(&priv->hw->chan[i].lock);
-+ }
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_start(priv->port[i].phydev);
-+ netif_wake_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ netif_stop_queue(dev);
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_stop(priv->port[i].phydev);
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+
-+ priv->hw->chan[i].refcount--;
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_disable(&priv->hw->chan[i].napi);
-+ spin_lock_bh(&priv->hw->chan[i].lock);
-+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+ spin_unlock_bh(&priv->hw->chan[i].lock);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+ if (!ch->skb[ch->dma.desc])
-+ goto skip;
-+
-+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->dma.dev,
-+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+skip:
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ XRX200_DMA_DATA_LEN;
-+
-+ return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+ struct net_device *dev = ch->devs[id];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
-+ int ret;
-+
-+ ret = xrx200_alloc_skb(ch);
-+
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+
-+ if (ret) {
-+ netdev_err(dev,
-+ "failed to allocate new rx buffer\n");
-+ return;
-+ }
-+
-+ skb_put(skb, len);
-+#ifdef SW_ROUTING
-+ skb_pull(skb, 8);
-+#endif
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_receive_skb(skb);
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct xrx200_chan *ch = container_of(napi,
-+ struct xrx200_chan, napi);
-+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+ int rx = 0;
-+ int complete = 0;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ u8 *special_tag = (u8*)skb->data;
-+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK;
-+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+ xrx200_hw_receive(ch, 0);
-+#endif
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ ltq_dma_enable_irq(&ch->dma);
-+ }
-+
-+ return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr;
-+ int pkts = 0;
-+ int i;
-+
-+ spin_lock_bh(&ch->lock);
-+ ltq_dma_ack_irq(&ch->dma);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ struct sk_buff *skb = ch->skb[ch->tx_free];
-+
-+ pkts++;
-+ ch->skb[ch->tx_free] = NULL;
-+ dev_kfree_skb(skb);
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ ltq_dma_enable_irq(&ch->dma);
-+ spin_unlock_bh(&ch->lock);
-+
-+ if (!pkts)
-+ return;
-+
-+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
-+ netif_wake_queue(ch->devs[i]);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev, unsigned int txqueue)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+ priv->stats.tx_errors++;
-+ netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct xrx200_chan *ch;
-+ struct ltq_dma_desc *desc;
-+ u32 byte_offset;
-+ int ret = NETDEV_TX_OK;
-+ int len;
-+#ifdef SW_ROUTING
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+#endif
-+ if(priv->id)
-+ ch = &priv->hw->chan[XRX200_DMA_TX_2];
-+ else
-+ ch = &priv->hw->chan[XRX200_DMA_TX];
-+
-+ desc = &ch->dma.desc_base[ch->dma.desc];
-+
-+ skb->dev = dev;
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+#ifdef SW_ROUTING
-+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) {
-+ u16 port_map = priv->port_map;
-+
-+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) {
-+ u16 vid;
-+ int i;
-+
-+ port_map = 0;
-+ if (!__vlan_get_tag(skb, &vid)) {
-+ for (i = 0; i < XRX200_MAX_VLAN; i++) {
-+ if (priv->hw->vlan_vid[i] != vid)
-+ continue;
-+ port_map = priv->hw->vlan_port_map[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ special_tag |= (port_map << PORT_MAP_SHIFT) |
-+ PORT_MAP_SEL | PORT_MAP_EN;
-+ }
-+ if(priv->wan)
-+ special_tag |= (1 << DPID_SHIFT);
-+ if(skb_headroom(skb) < 4) {
-+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+ dev_kfree_skb_any(skb);
-+ skb = tmp;
-+ }
-+ skb_push(skb, 4);
-+ memcpy(skb->data, &special_tag, sizeof(u32));
-+ len += 4;
-+#endif
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+
-+ spin_lock_bh(&ch->lock);
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_stop_queue(dev);
-+ ret = NETDEV_TX_BUSY;
-+ goto out;
-+ }
-+
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ netif_trans_update(dev);
-+
-+ desc->addr = ((unsigned int) dma_map_single(ch->dma.dev, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ if (ch->dma.desc == ch->tx_free)
-+ netif_stop_queue(dev);
-+
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes+=len;
-+
-+out:
-+ spin_unlock_bh(&ch->lock);
-+
-+ return ret;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+ struct xrx200_hw *hw = priv;
-+ int chnr = irq - XRX200_DMA_IRQ;
-+ struct xrx200_chan *ch = &hw->chan[chnr];
-+
-+ ltq_dma_disable_irq(&ch->dma);
-+ ltq_dma_ack_irq(&ch->dma);
-+
-+ if (chnr % 2)
-+ tasklet_schedule(&ch->tasklet);
-+ else
-+ napi_schedule(&ch->napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct device *dev, struct xrx200_hw *hw)
-+{
-+ int i, err = 0;
-+
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ for (i = 0; i < 8 && !err; i++) {
-+ int irq = XRX200_DMA_IRQ + i;
-+ struct xrx200_chan *ch = &hw->chan[i];
-+
-+ spin_lock_init(&ch->lock);
-+
-+ ch->idx = ch->dma.nr = i;
-+ ch->dma.dev = dev;
-+
-+ if (i == XRX200_DMA_TX) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+ } else if (i == XRX200_DMA_TX_2) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw);
-+ } else if (i == XRX200_DMA_RX) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (xrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+ } else
-+ continue;
-+
-+ if (!err)
-+ ch->dma.irq = irq;
-+ else
-+ pr_err("net-xrx200: failed to request irq %d\n", irq);
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+ u16 phyaddr = port->phydev->mdio.addr & MDIO_PHY_ADDR_MASK;
-+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+ u16 miirate = 0;
-+
-+ switch (port->phydev->speed) {
-+ case SPEED_1000:
-+ phyaddr |= MDIO_PHY_SPEED_G1;
-+ miirate = MII_CFG_RATE_M125;
-+ break;
-+
-+ case SPEED_100:
-+ phyaddr |= MDIO_PHY_SPEED_M100;
-+ switch (miimode) {
-+ case MII_CFG_MODE_RMIIM:
-+ case MII_CFG_MODE_RMIIP:
-+ miirate = MII_CFG_RATE_M50;
-+ break;
-+ default:
-+ miirate = MII_CFG_RATE_M25;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ phyaddr |= MDIO_PHY_SPEED_M10;
-+ miirate = MII_CFG_RATE_M2P5;
-+ break;
-+ }
-+
-+ if (port->phydev->link)
-+ phyaddr |= MDIO_PHY_LINK_UP;
-+ else
-+ phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+ if (port->phydev->duplex == DUPLEX_FULL)
-+ phyaddr |= MDIO_PHY_FDUP_EN;
-+ else
-+ phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+ udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].link != priv->port[i].phydev->link) {
-+ xrx200_gmac_update(&priv->port[i]);
-+ priv->port[i].link = priv->port[i].phydev->link;
-+ netdev_info(dev, "port %d %s link\n",
-+ priv->port[i].num,
-+ (priv->port[i].link)?("got"):("lost"));
-+ }
-+ }
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+ if ((ctrl & MDIO_BUSY) == 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return 1;
-+
-+ ltq_mdio_w32(val, MDIO_WRITE);
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_phy_has_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].phydev->link)
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_phy_link_change(struct phy_device *phydev, bool up)
-+{
-+ struct net_device *netdev = phydev->attached_dev;
-+
-+ if (up)
-+ netif_carrier_on(netdev);
-+ else if (!xrx200_phy_has_link(netdev))
-+ netif_carrier_off(netdev);
-+
-+ phydev->adjust_link(netdev);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ unsigned val;
-+
-+ phydev = mdiobus_get_phy(priv->hw->mii_bus, port->phy_addr);
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, phydev_name(phydev), &xrx200_mdio_link,
-+ port->phy_if);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ linkmode_zero(phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported);
-+ linkmode_set_bit_array(phy_10_100_features_array,
-+ ARRAY_SIZE(phy_10_100_features_array),
-+ phydev->supported);
-+ linkmode_set_bit_array(phy_gbit_features_array,
-+ ARRAY_SIZE(phy_gbit_features_array),
-+ phydev->supported);
-+ linkmode_copy(phydev->advertising, phydev->supported);
-+
-+ port->phydev = phydev;
-+ phydev->phy_link_change = xrx200_phy_link_change;
-+
-+ phy_attached_info(phydev);
-+
-+#ifdef SW_POLLING
-+ phy_read_status(phydev);
-+
-+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+#endif
-+ return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+ const struct xrx200_port *port)
-+{
-+ u16 miimode = 0;
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_MIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_RMIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+ MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err, i;
-+
-+#ifndef SW_POLLING
-+ unsigned int reg = 0;
-+
-+ /* enable auto polling */
-+ for (i = 0; i < priv->num_port; i++)
-+ reg |= BIT(priv->port[i].num);
-+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+ /* setup each port */
-+ for (i = 0; i < priv->num_port; i++)
-+ xrx200_port_config(priv, &priv->port[i]);
-+
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("net-xrx200: invalid MAC, using random\n");
-+ eth_random_addr(mac.sa_data);
-+ dev->addr_assign_type |= NET_ADDR_RANDOM;
-+ }
-+
-+ err = eth_mac_addr(dev, &mac);
-+ if (err)
-+ goto err_netdev;
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (xrx200_mdio_probe(dev, &priv->port[i]))
-+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+ priv->port[i].num);
-+
-+ return 0;
-+
-+err_netdev:
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+ int i;
-+
-+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+ ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+ ltq_switch_w32(i, PCE_TBL_ADDR);
-+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+ // start the table access:
-+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+ }
-+
-+ /* tell the switch that the microcode is loaded */
-+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* enable clock gate */
-+ clk_enable(hw->clk);
-+
-+ ltq_switch_w32(1, 0);
-+ mdelay(100);
-+ ltq_switch_w32(0, 0);
-+ /*
-+ * TODO: we should really disbale all phys/miis here and explicitly
-+ * enable them in the device secific init function
-+ */
-+
-+ /* disable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32(0, FDMA_PCTRLx(i));
-+ ltq_switch_w32(0, SDMA_PCTRLx(i));
-+ }
-+
-+ /* enable Switch */
-+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+ /* load the pce microcode */
-+ xrx200_pci_microcode();
-+
-+ /* Default unknown Broadcat/Multicast/Unicast port maps */
-+ ltq_switch_w32(0x40, PCE_PMAP1);
-+ ltq_switch_w32(0x40, PCE_PMAP2);
-+ ltq_switch_w32(0x40, PCE_PMAP3);
-+
-+ /* RMON Counter Enable for all physical ports */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+ /* disable auto polling */
-+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+ /* enable port statistic counters */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+ /* set IPG to 12 */
-+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+ /* enable status header, enable CRC */
-+ ltq_pmac_w32_mask(0,
-+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#else
-+ /* disable status header, enable CRC */
-+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#endif
-+
-+ /* enable port fetch/store dma & VLAN Modification */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+ }
-+
-+ /* enable special tag insertion on cpu port */
-+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0);
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ hw->vlan_vid[i] = i;
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* disable the switch */
-+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+ /* free the channels and IRQs */
-+ for (i = 0; i < 2; i++) {
-+ ltq_dma_free(&hw->chan[i].dma);
-+ if (hw->chan[i].dma.irq)
-+ free_irq(hw->chan[i].dma.irq, hw);
-+ }
-+
-+ /* free the allocated RX ring */
-+ for (i = 0; i < LTQ_DESC_NUM; i++)
-+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+ /* clear the mdio bus */
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+
-+ /* release the clock */
-+ clk_disable(hw->clk);
-+ clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+ hw->mii_bus = mdiobus_alloc();
-+ if (!hw->mii_bus)
-+ return -ENOMEM;
-+
-+ hw->mii_bus->read = xrx200_mdio_rd;
-+ hw->mii_bus->write = xrx200_mdio_wr;
-+ hw->mii_bus->name = "lantiq,xrx200-mdio";
-+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+ if (of_mdiobus_register(hw->mii_bus, np)) {
-+ mdiobus_free(hw->mii_bus);
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+ struct xrx200_port *p = &priv->port[priv->num_port];
-+ int ret;
-+
-+ if (!id)
-+ return;
-+
-+ memset(p, 0, sizeof(struct xrx200_port));
-+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+ addr = of_get_property(p->phy_node, "reg", NULL);
-+ if (!addr)
-+ return;
-+
-+ p->num = *id;
-+ p->phy_addr = *addr;
-+
-+ ret = of_get_phy_mode(port, &p->phy_if);
-+ if (ret)
-+ pr_err("Can't find phy-mode for port\n");
-+
-+ if (p->phy_addr > 0x10)
-+ p->flags = XRX200_PORT_TYPE_MAC;
-+ else
-+ p->flags = XRX200_PORT_TYPE_PHY;
-+ priv->num_port++;
-+
-+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+ if (gpio_is_valid(p->gpio))
-+ if (!gpio_request(p->gpio, "phy-reset")) {
-+ gpio_direction_output(p->gpio,
-+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+ udelay(100);
-+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+ /* is this port a wan port ? */
-+ if (priv->wan)
-+ priv->hw->wan_map |= BIT(p->num);
-+
-+ priv->port_map |= BIT(p->num);
-+
-+ /* store the port id in the hw struct so we can map ports -> devices */
-+ priv->hw->port_map[p->num] = priv->hw->num_devs;
-+
-+ /* store the phy addr in the hw struct so we can map ports -> phys */
-+ priv->hw->phy_addr[p->num] = p->phy_addr;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+ .ndo_init = xrx200_init,
-+ .ndo_open = xrx200_open,
-+ .ndo_stop = xrx200_close,
-+ .ndo_start_xmit = xrx200_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_get_stats = xrx200_get_stats,
-+ .ndo_tx_timeout = xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface, struct device *dev)
-+{
-+ struct xrx200_priv *priv;
-+ struct device_node *port;
-+ const __be32 *wan;
-+ const u8 *mac;
-+
-+ /* alloc the network device */
-+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+ if (!hw->devs[hw->num_devs])
-+ return;
-+
-+ /* setup the network device */
-+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+ SET_NETDEV_DEV(hw->devs[hw->num_devs], dev);
-+
-+ /* setup our private data */
-+ priv = netdev_priv(hw->devs[hw->num_devs]);
-+ priv->hw = hw;
-+ priv->id = hw->num_devs;
-+
-+ mac = of_get_mac_address(iface);
-+ if (!IS_ERR(mac))
-+ memcpy(priv->mac, mac, ETH_ALEN);
-+
-+ /* is this the wan interface ? */
-+ wan = of_get_property(iface, "lantiq,wan", NULL);
-+ if (wan && (*wan == 1))
-+ priv->wan = 1;
-+
-+ /* should the switch be enabled on this interface ? */
-+ if (of_find_property(iface, "lantiq,switch", NULL))
-+ priv->sw = 1;
-+
-+ /* load the ports that are part of the interface */
-+ for_each_child_of_node(iface, port)
-+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+ xrx200_of_port(priv, port);
-+
-+ /* register the actual device */
-+ if (!register_netdev(hw->devs[hw->num_devs]))
-+ hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np, *phy_np;
-+ struct of_phandle_iterator it;
-+ int err;
-+ int i;
-+
-+ /* load the memory ranges */
-+ for (i = 0; i < 4; i++) {
-+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res[i]) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENOENT;
-+ }
-+ }
-+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
-+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
-+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
-+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
-+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+ !xrx200_mii_membase || !xrx200_pmac_membase) {
-+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+ return -ENOMEM;
-+ }
-+
-+ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) {
-+ phy_np = it.node;
-+ if (phy_np) {
-+ struct platform_device *phy = of_find_device_by_node(phy_np);
-+
-+ of_node_put(phy_np);
-+ if (!platform_get_drvdata(phy))
-+ return -EPROBE_DEFER;
-+ }
-+ }
-+
-+ /* get the clock */
-+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(xrx200_hw.clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(xrx200_hw.clk);
-+ }
-+
-+ /* bring up the dma engine and IP core */
-+ xrx200_dma_init(&pdev->dev, &xrx200_hw);
-+ xrx200_hw_init(&xrx200_hw);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]);
-+
-+ /* bring up the mdio bus */
-+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+ "lantiq,xrx200-mdio");
-+ if (mdio_np)
-+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+ dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+ /* load the interfaces */
-+ for_each_child_of_node(pdev->dev.of_node, iface_np)
-+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+ xrx200_of_iface(&xrx200_hw, iface_np, &pdev->dev);
-+ else
-+ dev_err(&pdev->dev,
-+ "only %d interfaces allowed\n",
-+ XRX200_MAX_DEV);
-+ }
-+
-+ if (!xrx200_hw.num_devs) {
-+ xrx200_hw_cleanup(&xrx200_hw);
-+ dev_err(&pdev->dev, "failed to load interfaces\n");
-+ return -ENOENT;
-+ }
-+
-+ xrx200sw_init(&xrx200_hw);
-+
-+ /* set wan port mask */
-+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+ for (i = 0; i < xrx200_hw.num_devs; i++) {
-+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i];
-+ }
-+
-+ /* setup NAPI */
-+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+ platform_set_drvdata(pdev, &xrx200_hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct xrx200_priv *priv;
-+
-+ if (!dev)
-+ return 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* free stack related instances */
-+ netif_stop_queue(dev);
-+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+ /* shut down hardware */
-+ xrx200_hw_cleanup(&xrx200_hw);
-+
-+ /* remove the actual device */
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+ { .compatible = "lantiq,xrx200-net" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+ .probe = xrx200_probe,
-+ .remove = xrx200_remove,
-+ .driver = {
-+ .name = "lantiq,xrx200-net",
-+ .of_match_table = xrx200_match,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h
-@@ -0,0 +1,1328 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
-+ *
-+ * VR9 switch registers extracted from 310TUJ0 switch api
-+ * WARNING mult values of 0x00 may not be correct
-+ *
-+ */
-+
-+enum {
-+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
-+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
-+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
-+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
-+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
-+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
-+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
-+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
-+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
-+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
-+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
-+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
-+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
-+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
-+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
-+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
-+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
-+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
-+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
-+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
-+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
-+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
-+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
-+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
-+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
-+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
-+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
-+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
-+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
-+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
-+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
-+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
-+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
-+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
-+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
-+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
-+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
-+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
-+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
-+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
-+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
-+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
-+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
-+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
-+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
-+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
-+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
-+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
-+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
-+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
-+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
-+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
-+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
-+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
-+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
-+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
-+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
-+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
-+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
-+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
-+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
-+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
-+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
-+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
-+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
-+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
-+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
-+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
-+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
-+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
-+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
-+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
-+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
-+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
-+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
-+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
-+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
-+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
-+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
-+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
-+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
-+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
-+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
-+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
-+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
-+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
-+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
-+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
-+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
-+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
-+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
-+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
-+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
-+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
-+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
-+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
-+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
-+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
-+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
-+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
-+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
-+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
-+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
-+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
-+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
-+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
-+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
-+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
-+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
-+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
-+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
-+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
-+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
-+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
-+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
-+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
-+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
-+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
-+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
-+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
-+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
-+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
-+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
-+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
-+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
-+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
-+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
-+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
-+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
-+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
-+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
-+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
-+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
-+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
-+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
-+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
-+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
-+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
-+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
-+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
-+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
-+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
-+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
-+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
-+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
-+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
-+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
-+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
-+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
-+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
-+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
-+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
-+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
-+// XRX200_BM_CISEL_PORT, /* Port Number */
-+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
-+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
-+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
-+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
-+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
-+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
-+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
-+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
-+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
-+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
-+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
-+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
-+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
-+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
-+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
-+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
-+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
-+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
-+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
-+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
-+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
-+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
-+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
-+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
-+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
-+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
-+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
-+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
-+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
-+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
-+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
-+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
-+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
-+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
-+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
-+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
-+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
-+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
-+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
-+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
-+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
-+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
-+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
-+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
-+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
-+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
-+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
-+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
-+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
-+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
-+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
-+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
-+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
-+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
-+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
-+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
-+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
-+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
-+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
-+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
-+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
-+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
-+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
-+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
-+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
-+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
-+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
-+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
-+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
-+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
-+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
-+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
-+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
-+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
-+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
-+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
-+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
-+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
-+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
-+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
-+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
-+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
-+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
-+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
-+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
-+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
-+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
-+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
-+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
-+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
-+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
-+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
-+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
-+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
-+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
-+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
-+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
-+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
-+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
-+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
-+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
-+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
-+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
-+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
-+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
-+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
-+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
-+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
-+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
-+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
-+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
-+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
-+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
-+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
-+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
-+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
-+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
-+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
-+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
-+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
-+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
-+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
-+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
-+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
-+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
-+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
-+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
-+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
-+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
-+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
-+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
-+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
-+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
-+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
-+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
-+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
-+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
-+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
-+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
-+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
-+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
-+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
-+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
-+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
-+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
-+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
-+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
-+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
-+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
-+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
-+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
-+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
-+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
-+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
-+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
-+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
-+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
-+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
-+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
-+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
-+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
-+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
-+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
-+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
-+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
-+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
-+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
-+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
-+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
-+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
-+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
-+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
-+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
-+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
-+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
-+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
-+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
-+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
-+// XRX200_MAC_TEST, /* MAC Test Register */
-+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
-+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
-+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
-+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
-+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
-+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
-+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
-+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
-+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
-+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
-+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
-+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
-+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
-+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
-+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
-+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
-+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
-+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
-+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
-+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
-+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
-+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
-+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
-+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
-+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
-+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
-+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
-+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
-+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
-+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
-+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
-+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
-+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
-+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
-+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
-+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
-+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
-+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
-+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
-+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
-+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
-+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
-+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
-+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
-+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
-+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
-+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
-+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
-+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
-+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
-+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
-+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
-+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
-+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
-+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
-+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
-+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
-+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
-+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
-+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
-+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
-+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
-+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
-+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
-+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
-+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
-+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
-+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
-+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
-+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
-+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
-+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
-+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
-+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
-+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
-+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
-+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
-+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
-+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
-+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
-+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
-+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
-+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
-+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
-+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
-+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
-+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
-+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
-+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
-+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
-+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
-+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
-+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
-+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
-+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
-+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
-+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
-+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
-+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
-+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
-+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
-+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
-+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
-+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
-+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
-+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
-+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
-+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
-+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
-+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
-+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
-+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
-+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
-+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
-+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
-+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
-+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
-+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
-+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
-+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
-+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
-+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
-+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
-+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
-+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
-+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
-+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
-+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
-+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
-+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
-+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
-+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
-+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
-+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
-+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
-+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
-+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
-+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
-+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
-+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
-+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
-+// XRX200_SDMA_IER_FERR, /* Frame Error */
-+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
-+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
-+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
-+// XRX200_SDMA_ISR_FERR, /* Frame Error */
-+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
-+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
-+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
-+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
-+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
-+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
-+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
-+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
-+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
-+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
-+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
-+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
-+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
-+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
-+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
-+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
-+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
-+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
-+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
-+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
-+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
-+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
-+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+};
-+
-+
-+struct xrx200sw_reg {
-+ int offset;
-+ int shift;
-+ int size;
-+ int mult;
-+} xrx200sw_reg[] = {
-+// offeset shift size mult
-+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
-+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
-+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
-+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
-+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
-+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
-+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
-+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
-+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
-+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
-+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
-+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
-+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
-+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
-+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
-+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
-+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
-+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
-+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
-+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
-+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
-+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
-+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
-+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
-+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
-+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
-+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
-+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
-+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
-+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
-+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
-+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
-+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
-+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
-+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
-+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
-+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
-+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
-+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
-+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
-+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
-+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
-+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
-+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
-+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
-+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
-+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
-+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
-+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
-+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
-+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
-+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
-+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
-+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
-+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
-+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
-+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
-+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
-+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
-+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
-+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
-+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
-+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
-+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
-+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
-+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
-+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
-+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
-+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
-+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
-+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
-+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
-+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
-+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
-+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
-+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
-+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
-+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
-+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
-+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
-+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
-+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
-+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
-+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
-+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
-+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
-+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
-+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
-+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
-+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
-+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
-+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
-+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
-+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
-+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
-+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
-+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
-+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
-+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
-+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
-+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
-+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
-+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
-+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
-+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
-+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
-+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
-+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
-+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
-+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
-+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
-+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
-+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
-+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
-+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
-+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
-+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
-+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
-+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
-+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
-+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
-+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
-+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
-+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
-+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
-+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
-+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
-+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
-+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
-+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
-+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
-+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
-+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
-+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
-+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
-+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
-+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
-+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
-+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
-+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
-+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
-+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
-+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
-+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
-+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
-+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
-+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
-+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
-+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
-+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
-+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
-+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
-+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
-+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
-+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
-+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
-+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
-+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
-+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
-+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
-+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
-+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
-+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
-+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
-+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
-+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
-+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
-+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
-+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
-+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
-+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
-+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
-+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
-+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
-+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
-+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
-+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
-+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
-+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
-+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
-+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
-+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
-+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
-+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
-+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
-+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
-+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
-+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
-+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
-+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
-+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
-+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
-+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
-+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
-+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
-+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
-+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
-+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
-+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
-+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
-+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
-+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
-+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
-+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
-+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
-+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
-+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
-+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
-+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
-+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
-+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
-+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
-+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
-+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
-+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
-+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
-+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
-+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
-+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
-+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
-+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
-+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
-+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
-+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
-+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
-+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
-+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
-+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
-+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
-+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
-+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
-+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
-+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
-+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
-+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
-+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
-+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
-+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
-+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
-+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
-+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
-+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
-+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
-+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
-+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
-+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
-+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
-+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
-+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
-+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
-+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
-+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
-+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
-+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
-+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
-+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
-+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
-+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
-+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
-+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
-+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
-+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
-+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
-+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
-+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
-+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
-+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
-+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
-+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
-+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
-+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
-+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
-+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
-+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
-+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
-+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
-+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
-+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
-+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
-+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
-+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
-+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
-+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
-+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
-+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
-+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
-+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
-+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
-+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
-+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
-+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
-+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
-+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
-+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
-+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
-+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
-+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
-+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
-+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
-+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
-+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
-+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
-+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
-+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
-+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
-+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
-+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
-+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
-+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
-+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
-+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
-+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
-+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
-+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
-+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
-+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
-+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
-+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
-+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
-+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
-+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
-+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
-+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
-+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
-+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
-+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
-+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
-+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
-+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
-+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
-+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
-+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
-+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
-+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
-+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
-+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
-+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
-+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
-+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
-+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
-+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
-+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
-+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
-+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
-+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
-+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
-+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
-+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
-+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
-+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
-+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
-+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
-+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
-+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
-+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
-+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
-+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
-+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
-+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
-+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
-+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
-+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
-+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
-+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
-+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
-+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
-+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
-+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
-+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
-+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
-+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
-+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
-+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
-+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
-+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
-+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
-+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
-+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
-+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
-+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
-+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
-+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
-+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
-+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
-+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
-+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
-+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
-+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
-+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
-+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
-+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
-+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
-+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
-+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
-+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
-+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
-+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
-+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
-+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
-+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
-+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
-+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
-+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
-+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
-+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
-+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
-+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
-+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
-+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
-+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
-+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
-+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
-+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
-+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
-+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
-+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
-+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
-+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
-+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
-+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
-+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
-+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
-+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
-+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
-+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
-+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
-+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
-+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
-+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
-+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
-+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
-+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
-+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
-+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
-+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
-+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
-+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
-+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
-+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
-+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
-+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
-+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
-+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
-+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
-+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
-+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
-+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
-+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
-+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
-+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
-+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
-+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
-+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
-+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
-+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
-+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
-+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
-+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
-+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
-+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
-+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
-+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
-+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
-+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
-+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
-+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
-+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
-+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
-+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
-+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
-+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
-+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
-+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
-+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
-+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
-+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
-+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
-+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
-+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
-+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
-+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
-+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
-+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
-+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
-+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
-+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
-+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
-+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
-+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
-+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
-+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
-+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
-+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
-+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
-+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
-+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
-+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
-+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
-+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
-+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
-+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
-+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
-+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
-+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
-+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
-+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
-+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
-+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
-+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
-+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
-+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
-+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
-+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
-+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
-+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
-+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
-+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
-+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
-+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
-+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
-+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
-+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
-+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
-+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
-+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
-+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
-+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
-+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
-+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
-+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
-+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+};
-+
-+
diff --git a/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
deleted file mode 100644
index 8fd29161fe8..00000000000
--- a/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Sun, 7 Jul 2019 21:48:56 +0200
-Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader
-
-Upstream, the GPHY Firmware loader has been merged into the DSA switch
-driver. But we don't use the driver yet, so bring it back.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++
- .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++
- arch/mips/configs/xway_defconfig | 1 +
- arch/mips/lantiq/Kconfig | 4 +
- drivers/soc/lantiq/Makefile | 1 +
- drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++
- 6 files changed, 284 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
- create mode 100644 drivers/soc/lantiq/gphy.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
-@@ -0,0 +1,37 @@
-+Lantiq XWAY SoC GPHY binding
-+============================
-+
-+This binding describes a software-defined ethernet PHY, provided by the RCU
-+module on newer Lantiq XWAY SoCs (xRX200 and newer).
-+
-+-------------------------------------------------------------------------------
-+Required properties:
-+- compatible : Should be one of
-+ "lantiq,xrx200-gphy"
-+ "lantiq,xrx200a1x-gphy"
-+ "lantiq,xrx200a2x-gphy"
-+ "lantiq,xrx300-gphy"
-+ "lantiq,xrx330-gphy"
-+- reg : Addrress of the GPHY FW load address register
-+- resets : Must reference the RCU GPHY reset bit
-+- reset-names : One entry, value must be "gphy" or optional "gphy2"
-+- clocks : A reference to the (PMU) GPHY clock gate
-+
-+Optional properties:
-+- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
-+ <dt-bindings/mips/lantiq_xway_gphy.h>
-+
-+
-+-------------------------------------------------------------------------------
-+Example for the GPHys on the xRX200 SoCs:
-+
-+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-+ gphy0: gphy@20 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x20 0x4>;
-+
-+ resets = <&reset0 31 30>, <&reset1 7 7>;
-+ reset-names = "gphy", "gphy2";
-+ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
---- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
-+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
-@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
-+ gphy0: gphy@20 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x20 0x4>;
-+
-+ resets = <&reset0 31 30>, <&reset1 7 7>;
-+ reset-names = "gphy", "gphy2";
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
-+
-+ gphy1: gphy@68 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x68 0x4>;
-+
-+ resets = <&reset0 29 28>, <&reset1 6 6>;
-+ reset-names = "gphy", "gphy2";
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
-+
- reset0: reset-controller@10 {
- compatible = "lantiq,xrx200-reset";
- reg = <0x10 4>, <0x14 4>;
---- a/arch/mips/configs/xway_defconfig
-+++ b/arch/mips/configs/xway_defconfig
-@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y
- # CONFIG_COMPAT_BRK is not set
- CONFIG_LANTIQ=y
- CONFIG_PCI_LANTIQ=y
-+CONFIG_XRX200_PHY_FW=y
- CONFIG_CPU_MIPS32_R2=y
- CONFIG_MIPS_VPE_LOADER=y
- CONFIG_NR_CPUS=2
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI
- depends on PCIE_LANTIQ && PCI_MSI
- default y
-
-+config XRX200_PHY_FW
-+ bool "XRX200 PHY firmware loader"
-+ depends on SOC_XWAY
-+
- endif
---- a/drivers/soc/lantiq/Makefile
-+++ b/drivers/soc/lantiq/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-y += fpi-bus.o
-+obj-$(CONFIG_XRX200_PHY_FW) += gphy.o
---- /dev/null
-+++ b/drivers/soc/lantiq/gphy.c
-@@ -0,0 +1,235 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@phrozen.org>
-+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/firmware.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/property.h>
-+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
-+
-+struct xway_gphy_priv {
-+ struct clk *gphy_clk_gate;
-+ struct reset_control *gphy_reset;
-+ struct reset_control *gphy_reset2;
-+ void __iomem *membase;
-+ char *fw_name;
-+};
-+
-+struct xway_gphy_match_data {
-+ char *fe_firmware_name;
-+ char *ge_firmware_name;
-+};
-+
-+static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
-+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
-+};
-+
-+static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
-+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
-+};
-+
-+static const struct xway_gphy_match_data xrx300_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
-+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
-+};
-+
-+static const struct of_device_id xway_gphy_match[] = {
-+ { .compatible = "lantiq,xrx200-gphy", .data = NULL },
-+ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
-+ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
-+ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-+ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xway_gphy_match);
-+
-+static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
-+ dma_addr_t *dev_addr)
-+{
-+ const struct firmware *fw;
-+ void *fw_addr;
-+ dma_addr_t dma_addr;
-+ size_t size;
-+ int ret;
-+
-+ ret = request_firmware(&fw, priv->fw_name, dev);
-+ if (ret) {
-+ dev_err(dev, "failed to load firmware: %s, error: %i\n",
-+ priv->fw_name, ret);
-+ return ret;
-+ }
-+
-+ /*
-+ * GPHY cores need the firmware code in a persistent and contiguous
-+ * memory area with a 16 kB boundary aligned start address.
-+ */
-+ size = fw->size + XRX200_GPHY_FW_ALIGN;
-+
-+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
-+ if (fw_addr) {
-+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
-+ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
-+ memcpy(fw_addr, fw->data, fw->size);
-+ } else {
-+ dev_err(dev, "failed to alloc firmware memory\n");
-+ ret = -ENOMEM;
-+ }
-+
-+ release_firmware(fw);
-+
-+ return ret;
-+}
-+
-+static int xway_gphy_of_probe(struct platform_device *pdev,
-+ struct xway_gphy_priv *priv)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct xway_gphy_match_data *gphy_fw_name_cfg;
-+ u32 gphy_mode;
-+ int ret;
-+ struct resource *res_gphy;
-+
-+ gphy_fw_name_cfg = of_device_get_match_data(dev);
-+
-+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy"))
-+ switch (ltq_soc_type()) {
-+ case SOC_TYPE_VR9:
-+ gphy_fw_name_cfg = &xrx200a1x_gphy_data;
-+ break;
-+ case SOC_TYPE_VR9_2:
-+ gphy_fw_name_cfg = &xrx200a2x_gphy_data;
-+ break;
-+ }
-+
-+ priv->gphy_clk_gate = devm_clk_get(dev, NULL);
-+ if (IS_ERR(priv->gphy_clk_gate)) {
-+ dev_err(dev, "Failed to lookup gate clock\n");
-+ return PTR_ERR(priv->gphy_clk_gate);
-+ }
-+
-+ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->membase = devm_ioremap_resource(dev, res_gphy);
-+ if (IS_ERR(priv->membase))
-+ return PTR_ERR(priv->membase);
-+
-+ priv->gphy_reset = devm_reset_control_get(dev, "gphy");
-+ if (IS_ERR(priv->gphy_reset)) {
-+ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER)
-+ dev_err(dev, "Failed to lookup gphy reset\n");
-+ return PTR_ERR(priv->gphy_reset);
-+ }
-+
-+ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2");
-+ if (IS_ERR(priv->gphy_reset2))
-+ return PTR_ERR(priv->gphy_reset2);
-+
-+ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode);
-+ /* Default to GE mode */
-+ if (ret)
-+ gphy_mode = GPHY_MODE_GE;
-+
-+ switch (gphy_mode) {
-+ case GPHY_MODE_FE:
-+ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name;
-+ break;
-+ case GPHY_MODE_GE:
-+ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name;
-+ break;
-+ default:
-+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xway_gphy_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct xway_gphy_priv *priv;
-+ dma_addr_t fw_addr = 0;
-+ int ret;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ ret = xway_gphy_of_probe(pdev, priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(priv->gphy_clk_gate);
-+ if (ret)
-+ return ret;
-+
-+ ret = xway_gphy_load(dev, priv, &fw_addr);
-+ if (ret) {
-+ clk_disable_unprepare(priv->gphy_clk_gate);
-+ return ret;
-+ }
-+
-+ reset_control_assert(priv->gphy_reset);
-+ reset_control_assert(priv->gphy_reset2);
-+
-+ iowrite32be(fw_addr, priv->membase);
-+
-+ reset_control_deassert(priv->gphy_reset);
-+ reset_control_deassert(priv->gphy_reset2);
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ return ret;
-+}
-+
-+static int xway_gphy_remove(struct platform_device *pdev)
-+{
-+ struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
-+
-+ iowrite32be(0, priv->membase);
-+
-+ clk_disable_unprepare(priv->gphy_clk_gate);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver xway_gphy_driver = {
-+ .probe = xway_gphy_probe,
-+ .remove = xway_gphy_remove,
-+ .driver = {
-+ .name = "xway-rcu-gphy",
-+ .of_match_table = xway_gphy_match,
-+ },
-+};
-+
-+module_platform_driver(xway_gphy_driver);
-+
-+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
-+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
-+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-+MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
deleted file mode 100644
index 9b326c50d1f..00000000000
--- a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Sun, 7 Jul 2019 21:45:51 +0200
-Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes
-
-Switch back to the former used names, to make the legacy switch driver
-happy.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/lantiq/xway/sysctrl.c | 14 +++++++-------
- 1 file changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -503,7 +503,7 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
- clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
- clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- } else if (of_machine_is_compatible("lantiq,ar10")) {
-@@ -511,11 +511,11 @@ void __init ltq_soc_init(void)
- ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
- clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
- clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH |
- PMU_PPE_DP | PMU_PPE_TC);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
-- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
- clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
-@@ -534,12 +534,12 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
-
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0,
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0,
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_PPE_TOP);
-- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
-- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
deleted file mode 100644
index 6a2143e17ef..00000000000
--- a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
+++ /dev/null
@@ -1,3470 +0,0 @@
-From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver
-
----
- drivers/net/ethernet/Kconfig | 8 +-
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_pce.h | 163 +++
- drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++
- 5 files changed, 3297 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -108,7 +108,13 @@ config LANTIQ_ETOP
- tristate "Lantiq SoC ETOP driver"
- depends on SOC_TYPE_XWAY
- ---help---
-- Support for the MII0 inside the Lantiq SoC
-+ Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200_LEGACY
-+ tristate "Lantiq SoC XRX200 driver"
-+ depends on SOC_TYPE_XWAY
-+ ---help---
-+ Support for the MII0 inside the Lantiq VDSL SoC
-
- config LANTIQ_XRX200
- tristate "Lantiq / Intel xRX200 PMAC network driver"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
- obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
-+obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_pce.h
-@@ -0,0 +1,163 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+ OUT_MAC0 = 0,
-+ OUT_MAC1,
-+ OUT_MAC2,
-+ OUT_MAC3,
-+ OUT_MAC4,
-+ OUT_MAC5,
-+ OUT_ETHTYP,
-+ OUT_VTAG0,
-+ OUT_VTAG1,
-+ OUT_ITAG0,
-+ OUT_ITAG1, /*10 */
-+ OUT_ITAG2,
-+ OUT_ITAG3,
-+ OUT_IP0,
-+ OUT_IP1,
-+ OUT_IP2,
-+ OUT_IP3,
-+ OUT_SIP0,
-+ OUT_SIP1,
-+ OUT_SIP2,
-+ OUT_SIP3, /*20*/
-+ OUT_SIP4,
-+ OUT_SIP5,
-+ OUT_SIP6,
-+ OUT_SIP7,
-+ OUT_DIP0,
-+ OUT_DIP1,
-+ OUT_DIP2,
-+ OUT_DIP3,
-+ OUT_DIP4,
-+ OUT_DIP5, /*30*/
-+ OUT_DIP6,
-+ OUT_DIP7,
-+ OUT_SESID,
-+ OUT_PROT,
-+ OUT_APP0,
-+ OUT_APP1,
-+ OUT_IGMP0,
-+ OUT_IGMP1,
-+ OUT_IPOFF, /*39*/
-+ OUT_NONE = 63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR 0
-+#define IPV6 1
-+#define LENACCU 2
-+
-+/* parser's microcode flag type */
-+enum {
-+ FLAG_ITAG = 0,
-+ FLAG_VLAN,
-+ FLAG_SNAP,
-+ FLAG_PPPOE,
-+ FLAG_IPV6,
-+ FLAG_IPV6FL,
-+ FLAG_IPV4,
-+ FLAG_IGMP,
-+ FLAG_TU,
-+ FLAG_HOP,
-+ FLAG_NN1, /*10 */
-+ FLAG_NN2,
-+ FLAG_END,
-+ FLAG_NO, /*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+ unsigned short val[4];
-+/* unsigned short val_2;
-+ unsigned short val_1;
-+ unsigned short val_0;*/
-+} pce_microcode[] = {
-+ /* value mask ns fields L type flags ipv4_len */
-+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
-+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
-+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
-+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
-+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
-+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
-+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
-+};
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c
-@@ -0,0 +1,1927 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/switch.h>
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/if_vlan.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_legacy.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+
-+#ifdef SW_ROUTING
-+#define XRX200_MAX_DEV 2
-+#else
-+#define XRX200_MAX_DEV 1
-+#endif
-+
-+#define XRX200_MAX_VLAN 64
-+#define XRX200_PCE_ACTVLAN_IDX 0x01
-+#define XRX200_PCE_VLANMAP_IDX 0x02
-+
-+#define XRX200_MAX_PORT 7
-+#define XRX200_MAX_DMA 8
-+
-+#define XRX200_HEADROOM 4
-+
-+#define XRX200_TX_TIMEOUT (10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY 1
-+#define XRX200_PORT_TYPE_MAC 2
-+
-+/* DMA */
-+#define XRX200_DMA_DATA_LEN 0x600
-+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX 0
-+#define XRX200_DMA_TX 1
-+#define XRX200_DMA_TX_2 3
-+#define XRX200_DMA_IS_TX(x) (x%2)
-+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0 0x2A00
-+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0 0x2F00
-+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0 0x200
-+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB 0x0000
-+#define MDIO_CTRL 0x0020
-+#define MDIO_READ 0x0024
-+#define MDIO_WRITE 0x0028
-+#define MDIO_PHY0 0x0054
-+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0 0x002C
-+#define MDIO_CLK_CFG1 0x0030
-+
-+#define MDIO_GLOB_ENABLE 0x8000
-+#define MDIO_BUSY BIT(12)
-+#define MDIO_RD BIT(11)
-+#define MDIO_WR BIT(10)
-+#define MDIO_MASK 0x1f
-+#define MDIO_ADDRSHIFT 5
-+#define MDIO1_25MHZ 9
-+
-+#define MDIO_PHY_LINK_DOWN 0x4000
-+#define MDIO_PHY_LINK_UP 0x2000
-+
-+#define MDIO_PHY_SPEED_M10 0x0000
-+#define MDIO_PHY_SPEED_M100 0x0800
-+#define MDIO_PHY_SPEED_G1 0x1000
-+
-+#define MDIO_PHY_FDUP_EN 0x0200
-+#define MDIO_PHY_FDUP_DIS 0x0600
-+
-+#define MDIO_PHY_LINK_MASK 0x6000
-+#define MDIO_PHY_SPEED_MASK 0x1800
-+#define MDIO_PHY_FDUP_MASK 0x0600
-+#define MDIO_PHY_ADDR_MASK 0x001f
-+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p) (p * 8)
-+
-+#define MII_CFG_EN BIT(14)
-+
-+#define MII_CFG_MODE_MIIP 0x0
-+#define MII_CFG_MODE_MIIM 0x1
-+#define MII_CFG_MODE_RMIIP 0x2
-+#define MII_CFG_MODE_RMIIM 0x3
-+#define MII_CFG_MODE_RGMII 0x4
-+#define MII_CFG_MODE_MASK 0xf
-+
-+#define MII_CFG_RATE_M2P5 0x00
-+#define MII_CFG_RATE_M25 0x10
-+#define MII_CFG_RATE_M125 0x20
-+#define MII_CFG_RATE_M50 0x30
-+#define MII_CFG_RATE_AUTO 0x40
-+#define MII_CFG_RATE_MASK 0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL 0x0000
-+#define PMAC_RX_IPG 0x0024
-+#define PMAC_EWAN 0x002c
-+
-+#define PMAC_IPG_MASK 0xf
-+#define PMAC_HD_CTL_AS 0x0008
-+#define PMAC_HD_CTL_AC 0x0004
-+#define PMAC_HD_CTL_RC 0x0010
-+#define PMAC_HD_CTL_RXSH 0x0040
-+#define PMAC_HD_CTL_AST 0x0080
-+#define PMAC_HD_CTL_RST 0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK 0x1120
-+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR 0x1138
-+#define PCE_TBL_CTRL 0x113c
-+#define PCE_PMAP1 0x114c
-+#define PCE_PMAP2 0x1150
-+#define PCE_PMAP3 0x1154
-+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK 0x1f
-+#define PCE_TBL_CFG_ADWR 0x20
-+#define PCE_TBL_CFG_ADWR_MASK 0x60
-+#define PCE_INGRESS BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG (0x2314)
-+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p) (0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT 24
-+#define DPID_SHIFT 16
-+#define DPID_ENABLE 1
-+#define SPID_CPU_PORT 2
-+#define PORT_MAP_SEL BIT(15)
-+#define PORT_MAP_EN BIT(14)
-+#define PORT_MAP_SHIFT 1
-+#define PORT_MAP_MASK 0x3f
-+
-+#define SPPID_MASK 0x7
-+#define SPPID_SHIFT 4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE (-1)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+struct xrx200_port {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+
-+ int link;
-+ int gpio;
-+ enum of_gpio_flags gpio_flags;
-+
-+ struct phy_device *phydev;
-+ struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+ int idx;
-+ int refcount;
-+ int tx_free;
-+
-+ struct net_device dummy_dev;
-+ struct net_device *devs[XRX200_MAX_DEV];
-+
-+ struct tasklet_struct tasklet;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+
-+ spinlock_t lock;
-+};
-+
-+struct xrx200_hw {
-+ struct clk *clk;
-+ struct mii_bus *mii_bus;
-+ u8 phy_addr[XRX200_MAX_PORT];
-+
-+ struct xrx200_chan chan[XRX200_MAX_DMA];
-+ u16 vlan_vid[XRX200_MAX_VLAN];
-+ u16 vlan_port_map[XRX200_MAX_VLAN];
-+
-+ struct net_device *devs[XRX200_MAX_DEV];
-+ int num_devs;
-+
-+ int port_map[XRX200_MAX_PORT];
-+ unsigned short wan_map;
-+
-+ struct switch_dev swdev;
-+};
-+
-+struct xrx200_priv {
-+ struct net_device_stats stats;
-+ int id;
-+
-+ struct xrx200_port port[XRX200_MAX_PORT];
-+ int num_port;
-+ bool wan;
-+ bool sw;
-+ unsigned short port_map;
-+ unsigned char mac[6];
-+
-+ struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+#define XRX200_GLOBAL_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_global_attr, \
-+ .get = xrx200_get_global_attr
-+
-+#define XRX200_PORT_REGATTR(reg) \
-+ .id = reg, \
-+ .type = SWITCH_TYPE_INT, \
-+ .set = xrx200_set_port_attr, \
-+ .get = xrx200_get_port_attr
-+
-+static int xrx200sw_read_x(int reg, int x)
-+{
-+ int value, mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ value = ltq_switch_r32(addr);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ value = (value >> xrx200sw_reg[reg].shift);
-+
-+ return (value & mask);
-+}
-+
-+static int xrx200sw_read(int reg)
-+{
-+ return xrx200sw_read_x(reg, 0);
-+}
-+
-+static void xrx200sw_write_x(int value, int reg, int x)
-+{
-+ int mask, addr;
-+
-+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
-+ mask = (1 << xrx200sw_reg[reg].size) - 1;
-+ mask = (mask << xrx200sw_reg[reg].shift);
-+ value = (value << xrx200sw_reg[reg].shift) & mask;
-+
-+ ltq_switch_w32_mask(mask, value, addr);
-+}
-+
-+static void xrx200sw_write(int value, int reg)
-+{
-+ xrx200sw_write_x(value, reg, 0);
-+}
-+
-+struct xrx200_pce_table_entry {
-+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
-+ int table; // PCE_TBL_CTRL.ADDR = pData->table
-+ unsigned short key[8];
-+ unsigned short val[5];
-+ unsigned short mask;
-+ unsigned short type;
-+ unsigned short valid;
-+ unsigned short gmap;
-+};
-+
-+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based read)
-+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // read the keys
-+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
-+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
-+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
-+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
-+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
-+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
-+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
-+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
-+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
-+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
-+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
-+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ return 0;
-+}
-+
-+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
-+{
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ // prepare the table access:
-+ // PCE_TBL_ADDR.ADDR = pData->table_index
-+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
-+ // PCE_TBL_CTRL.ADDR = pData->table
-+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
-+
-+ //(address-based write)
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
-+
-+ // read the keys
-+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
-+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
-+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
-+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
-+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
-+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
-+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
-+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
-+
-+ // read the values
-+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
-+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
-+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
-+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
-+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
-+
-+ // read the mask
-+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
-+ // read the type
-+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
-+ // read the valid flag
-+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
-+ // read the group map
-+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
-+
-+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
-+
-+ // wait until hardware is ready
-+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
-+
-+ return 0;
-+}
-+
-+static void xrx200sw_fixup_pvids(void)
-+{
-+ int index, p, portmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+ struct xrx200_pce_table_entry tev;
-+
-+ portmap = 0;
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ portmap |= BIT(p);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (index = XRX200_MAX_VLAN; index-- > 0;)
-+ {
-+ tev.index = index;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.valid == 0)
-+ continue;
-+
-+ tem.index = index;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (untagged & BIT(p))
-+ {
-+ portmap &= ~BIT(p);
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++)
-+ if (portmap & BIT(p))
-+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
-+ }
-+}
-+
-+// swconfig interface
-+static void xrx200_hw_init(struct xrx200_hw *hw);
-+
-+// global
-+static int xrx200sw_reset_switch(struct switch_dev *dev)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ xrx200_hw_init(hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ int p;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ for (p = 0; p < XRX200_MAX_PORT; p++) {
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
-+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
-+ }
-+
-+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
-+ return 0;
-+}
-+
-+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write(val->value.i, attr->id);
-+ return 0;
-+}
-+
-+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ val->value.i = xrx200sw_read(attr->id);
-+ return 0;
-+}
-+
-+// vlan
-+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+ int i;
-+ struct xrx200_pce_table_entry tev;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tev.index = i;
-+ xrx200_pce_table_entry_read(&tev);
-+ if (tev.key[0] == val->value.i && i != val->port_vlan)
-+ return -EINVAL;
-+ }
-+
-+ hw->vlan_vid[val->port_vlan] = val->value.i;
-+
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ tev.key[0] = val->value.i;
-+ tev.valid = val->value.i > 0;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ tem.val[0] = val->value.i;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry te;
-+
-+ te.table = XRX200_PCE_ACTVLAN_IDX;
-+ te.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&te);
-+ val->value.i = te.key[0];
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+ int i, portmap, tagmap, untagged;
-+ struct xrx200_pce_table_entry tem;
-+
-+ portmap = 0;
-+ tagmap = 0;
-+ for (i = 0; i < val->len; i++)
-+ {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ portmap |= (1 << p->id);
-+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
-+ tagmap |= (1 << p->id);
-+ }
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+
-+ untagged = portmap ^ tagmap;
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ {
-+ tem.index = i;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ if (tem.val[0] == 0)
-+ continue;
-+
-+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
-+ return -EINVAL;
-+ }
-+
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ // auto-enable this vlan if not enabled already
-+ if (tem.val[0] == 0)
-+ {
-+ struct switch_val v;
-+ v.port_vlan = val->port_vlan;
-+ v.value.i = val->port_vlan;
-+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
-+ return -EINVAL;
-+
-+ //read updated tem
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+ }
-+
-+ tem.val[1] = portmap;
-+ tem.val[2] = tagmap;
-+ xrx200_pce_table_entry_write(&tem);
-+
-+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2);
-+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3);
-+ hw->vlan_port_map[val->port_vlan] = portmap;
-+
-+ xrx200sw_fixup_pvids();
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ int i;
-+ unsigned short ports, tags;
-+ struct xrx200_pce_table_entry tem;
-+
-+ tem.table = XRX200_PCE_VLANMAP_IDX;
-+ tem.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tem);
-+
-+ ports = tem.val[1];
-+ tags = tem.val[2];
-+
-+ for (i = 0; i < XRX200_MAX_PORT; i++) {
-+ struct switch_port *p;
-+
-+ if (!(ports & (1 << i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (tags & (1 << i))
-+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
-+ else
-+ p->flags = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ if (tev.key[0] == 0)
-+ return -EINVAL;
-+
-+ tev.valid = val->value.i;
-+ xrx200_pce_table_entry_write(&tev);
-+
-+ xrx200sw_fixup_pvids();
-+ return 0;
-+}
-+
-+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = val->port_vlan;
-+ xrx200_pce_table_entry_read(&tev);
-+ val->value.i = tev.valid;
-+
-+ return 0;
-+}
-+
-+// port
-+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct xrx200_pce_table_entry tev;
-+
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ tev.table = XRX200_PCE_ACTVLAN_IDX;
-+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
-+ xrx200_pce_table_entry_read(&tev);
-+
-+ *val = tev.key[0];
-+ return 0;
-+}
-+
-+static int xrx200sw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
-+ if (!link->link)
-+ return 0;
-+
-+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
-+
-+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
-+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
-+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
-+
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_set_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ if (port >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ return switch_generic_set_link(dev, port, link);
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val);
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg);
-+
-+static int xrx200sw_phy_read16(struct switch_dev *dev, int addr, u8 reg, u16 *value)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ *value = xrx200_mdio_rd(hw->mii_bus, hw->phy_addr[addr], reg);
-+
-+ return 0;
-+}
-+
-+static int xrx200sw_phy_write16(struct switch_dev *dev, int addr, u8 reg, u16 value)
-+{
-+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
-+
-+ return xrx200_mdio_wr(hw->mii_bus, hw->phy_addr[addr], reg, value);
-+}
-+
-+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ if ((attr->max > 0) && (val->value.i > attr->max))
-+ return -EINVAL;
-+
-+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
-+{
-+ if (val->port_vlan >= XRX200_MAX_PORT)
-+ return -EINVAL;
-+
-+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
-+ return 0;
-+}
-+
-+// attributes
-+static struct switch_attr xrx200sw_globals[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .set = xrx200_set_vlan_mode_enable,
-+ .get = xrx200_get_vlan_mode_enable,
-+ .name = "enable_vlan",
-+ .description = "Enable VLAN mode",
-+ .max = 1},
-+};
-+
-+static struct switch_attr xrx200sw_port[] = {
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
-+ .name = "uvr",
-+ .description = "Unknown VLAN Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
-+ .name = "vsr",
-+ .description = "VLAN Security Rule",
-+ .max = 1,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
-+ .name = "vinr",
-+ .description = "VLAN Ingress Tag Rule",
-+ .max = 2,
-+ },
-+ {
-+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
-+ .name = "tvm",
-+ .description = "Transparent VLAN Mode",
-+ .max = 1,
-+ },
-+};
-+
-+static struct switch_attr xrx200sw_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = xrx200sw_set_vlan_vid,
-+ .get = xrx200sw_get_vlan_vid,
-+ .max = 4094,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable",
-+ .description = "Enable VLAN",
-+ .set = xrx200sw_set_vlan_enable,
-+ .get = xrx200sw_get_vlan_enable,
-+ .max = 1,
-+ },
-+};
-+
-+static const struct switch_dev_ops xrx200sw_ops = {
-+ .attr_global = {
-+ .attr = xrx200sw_globals,
-+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
-+ },
-+ .attr_port = {
-+ .attr = xrx200sw_port,
-+ .n_attr = ARRAY_SIZE(xrx200sw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = xrx200sw_vlan,
-+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
-+ },
-+ .get_vlan_ports = xrx200sw_get_vlan_ports,
-+ .set_vlan_ports = xrx200sw_set_vlan_ports,
-+ .get_port_pvid = xrx200sw_get_port_pvid,
-+ .reset_switch = xrx200sw_reset_switch,
-+ .get_port_link = xrx200sw_get_port_link,
-+ .set_port_link = xrx200sw_set_port_link,
-+// .get_port_stats = xrx200sw_get_port_stats, //TODO
-+ .phy_read16 = xrx200sw_phy_read16,
-+ .phy_write16 = xrx200sw_phy_write16,
-+};
-+
-+static int xrx200sw_init(struct xrx200_hw *hw)
-+{
-+ int netdev_num;
-+
-+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
-+ {
-+ struct switch_dev *swdev;
-+ struct net_device *dev = hw->devs[netdev_num];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ if (!priv->sw)
-+ continue;
-+
-+ swdev = &hw->swdev;
-+
-+ swdev->name = "Lantiq XRX200 Switch";
-+ swdev->vlans = XRX200_MAX_VLAN;
-+ swdev->ports = XRX200_MAX_PORT;
-+ swdev->cpu_port = 6;
-+ swdev->ops = &xrx200sw_ops;
-+
-+ register_switch(swdev, dev);
-+ return 0; // enough switches
-+ }
-+ return 0;
-+}
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+ spin_lock_bh(&priv->hw->chan[i].lock);
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_enable(&priv->hw->chan[i].napi);
-+ ltq_dma_open(&priv->hw->chan[i].dma);
-+ ltq_dma_enable_irq(&priv->hw->chan[i].dma);
-+ }
-+ priv->hw->chan[i].refcount++;
-+ spin_unlock_bh(&priv->hw->chan[i].lock);
-+ }
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_start(priv->port[i].phydev);
-+ netif_wake_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ netif_stop_queue(dev);
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (priv->port[i].phydev)
-+ phy_stop(priv->port[i].phydev);
-+
-+ for (i = 0; i < XRX200_MAX_DMA; i++) {
-+ if (!priv->hw->chan[i].dma.irq)
-+ continue;
-+
-+ priv->hw->chan[i].refcount--;
-+ if (!priv->hw->chan[i].refcount) {
-+ if (XRX200_DMA_IS_RX(i))
-+ napi_disable(&priv->hw->chan[i].napi);
-+ spin_lock_bh(&priv->hw->chan[i].lock);
-+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+ spin_unlock_bh(&priv->hw->chan[i].lock);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+ if (!ch->skb[ch->dma.desc])
-+ goto skip;
-+
-+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->dma.dev,
-+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+skip:
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ XRX200_DMA_DATA_LEN;
-+
-+ return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+ struct net_device *dev = ch->devs[id];
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
-+ int ret;
-+
-+ ret = xrx200_alloc_skb(ch);
-+
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+
-+ if (ret) {
-+ netdev_err(dev,
-+ "failed to allocate new rx buffer\n");
-+ return;
-+ }
-+
-+ skb_put(skb, len);
-+#ifdef SW_ROUTING
-+ skb_pull(skb, 8);
-+#endif
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_receive_skb(skb);
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct xrx200_chan *ch = container_of(napi,
-+ struct xrx200_chan, napi);
-+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+ int rx = 0;
-+ int complete = 0;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ u8 *special_tag = (u8*)skb->data;
-+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK;
-+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+ xrx200_hw_receive(ch, 0);
-+#endif
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ ltq_dma_enable_irq(&ch->dma);
-+ }
-+
-+ return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr;
-+ int pkts = 0;
-+ int i;
-+
-+ spin_lock_bh(&ch->lock);
-+ ltq_dma_ack_irq(&ch->dma);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ struct sk_buff *skb = ch->skb[ch->tx_free];
-+
-+ pkts++;
-+ ch->skb[ch->tx_free] = NULL;
-+ dev_kfree_skb(skb);
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ ltq_dma_enable_irq(&ch->dma);
-+ spin_unlock_bh(&ch->lock);
-+
-+ if (!pkts)
-+ return;
-+
-+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
-+ netif_wake_queue(ch->devs[i]);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+
-+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+ priv->stats.tx_errors++;
-+ netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct xrx200_chan *ch;
-+ struct ltq_dma_desc *desc;
-+ u32 byte_offset;
-+ int ret = NETDEV_TX_OK;
-+ int len;
-+#ifdef SW_ROUTING
-+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+#endif
-+ if(priv->id)
-+ ch = &priv->hw->chan[XRX200_DMA_TX_2];
-+ else
-+ ch = &priv->hw->chan[XRX200_DMA_TX];
-+
-+ desc = &ch->dma.desc_base[ch->dma.desc];
-+
-+ skb->dev = dev;
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+#ifdef SW_ROUTING
-+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) {
-+ u16 port_map = priv->port_map;
-+
-+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) {
-+ u16 vid;
-+ int i;
-+
-+ port_map = 0;
-+ if (!__vlan_get_tag(skb, &vid)) {
-+ for (i = 0; i < XRX200_MAX_VLAN; i++) {
-+ if (priv->hw->vlan_vid[i] != vid)
-+ continue;
-+ port_map = priv->hw->vlan_port_map[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ special_tag |= (port_map << PORT_MAP_SHIFT) |
-+ PORT_MAP_SEL | PORT_MAP_EN;
-+ }
-+ if(priv->wan)
-+ special_tag |= (1 << DPID_SHIFT);
-+ if(skb_headroom(skb) < 4) {
-+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+ dev_kfree_skb_any(skb);
-+ skb = tmp;
-+ }
-+ skb_push(skb, 4);
-+ memcpy(skb->data, &special_tag, sizeof(u32));
-+ len += 4;
-+#endif
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+
-+ spin_lock_bh(&ch->lock);
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_stop_queue(dev);
-+ ret = NETDEV_TX_BUSY;
-+ goto out;
-+ }
-+
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ netif_trans_update(dev);
-+
-+ desc->addr = ((unsigned int) dma_map_single(ch->dma.dev, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ if (ch->dma.desc == ch->tx_free)
-+ netif_stop_queue(dev);
-+
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes+=len;
-+
-+out:
-+ spin_unlock_bh(&ch->lock);
-+
-+ return ret;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+ struct xrx200_hw *hw = priv;
-+ int chnr = irq - XRX200_DMA_IRQ;
-+ struct xrx200_chan *ch = &hw->chan[chnr];
-+
-+ ltq_dma_disable_irq(&ch->dma);
-+ ltq_dma_ack_irq(&ch->dma);
-+
-+ if (chnr % 2)
-+ tasklet_schedule(&ch->tasklet);
-+ else
-+ napi_schedule(&ch->napi);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct device *dev, struct xrx200_hw *hw)
-+{
-+ int i, err = 0;
-+
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ for (i = 0; i < 8 && !err; i++) {
-+ int irq = XRX200_DMA_IRQ + i;
-+ struct xrx200_chan *ch = &hw->chan[i];
-+
-+ spin_lock_init(&ch->lock);
-+
-+ ch->idx = ch->dma.nr = i;
-+ ch->dma.dev = dev;
-+
-+ if (i == XRX200_DMA_TX) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+ } else if (i == XRX200_DMA_TX_2) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw);
-+ } else if (i == XRX200_DMA_RX) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (xrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+ } else
-+ continue;
-+
-+ if (!err)
-+ ch->dma.irq = irq;
-+ else
-+ pr_err("net-xrx200: failed to request irq %d\n", irq);
-+ }
-+
-+ return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+ u16 phyaddr = port->phydev->mdio.addr & MDIO_PHY_ADDR_MASK;
-+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+ u16 miirate = 0;
-+
-+ switch (port->phydev->speed) {
-+ case SPEED_1000:
-+ phyaddr |= MDIO_PHY_SPEED_G1;
-+ miirate = MII_CFG_RATE_M125;
-+ break;
-+
-+ case SPEED_100:
-+ phyaddr |= MDIO_PHY_SPEED_M100;
-+ switch (miimode) {
-+ case MII_CFG_MODE_RMIIM:
-+ case MII_CFG_MODE_RMIIP:
-+ miirate = MII_CFG_RATE_M50;
-+ break;
-+ default:
-+ miirate = MII_CFG_RATE_M25;
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ phyaddr |= MDIO_PHY_SPEED_M10;
-+ miirate = MII_CFG_RATE_M2P5;
-+ break;
-+ }
-+
-+ if (port->phydev->link)
-+ phyaddr |= MDIO_PHY_LINK_UP;
-+ else
-+ phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+ if (port->phydev->duplex == DUPLEX_FULL)
-+ phyaddr |= MDIO_PHY_FDUP_EN;
-+ else
-+ phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+ udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].link != priv->port[i].phydev->link) {
-+ xrx200_gmac_update(&priv->port[i]);
-+ priv->port[i].link = priv->port[i].phydev->link;
-+ netdev_info(dev, "port %d %s link\n",
-+ priv->port[i].num,
-+ (priv->port[i].link)?("got"):("lost"));
-+ }
-+ }
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+ if ((ctrl & MDIO_BUSY) == 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return 1;
-+
-+ ltq_mdio_w32(val, MDIO_WRITE);
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+ (reg & MDIO_MASK),
-+ MDIO_CTRL);
-+
-+ if (xrx200_mdio_poll(bus))
-+ return -1;
-+
-+ return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_phy_has_link(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_port; i++) {
-+ if (!priv->port[i].phydev)
-+ continue;
-+
-+ if (priv->port[i].phydev->link)
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
-+{
-+ struct net_device *netdev = phydev->attached_dev;
-+
-+ if (do_carrier) {
-+ if (up)
-+ netif_carrier_on(netdev);
-+ else if (!xrx200_phy_has_link(netdev))
-+ netif_carrier_off(netdev);
-+ }
-+
-+ phydev->adjust_link(netdev);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ unsigned val;
-+
-+ phydev = mdiobus_get_phy(priv->hw->mii_bus, port->phy_addr);
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, phydev_name(phydev), &xrx200_mdio_link,
-+ port->phy_if);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ linkmode_zero(phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
-+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported);
-+ linkmode_set_bit_array(phy_10_100_features_array,
-+ ARRAY_SIZE(phy_10_100_features_array),
-+ phydev->supported);
-+ linkmode_set_bit_array(phy_gbit_features_array,
-+ ARRAY_SIZE(phy_gbit_features_array),
-+ phydev->supported);
-+ linkmode_copy(phydev->advertising, phydev->supported);
-+
-+ port->phydev = phydev;
-+ phydev->phy_link_change = xrx200_phy_link_change;
-+
-+ phy_attached_info(phydev);
-+
-+#ifdef SW_POLLING
-+ phy_read_status(phydev);
-+
-+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+#endif
-+ return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+ const struct xrx200_port *port)
-+{
-+ u16 miimode = 0;
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_MIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & XRX200_PORT_TYPE_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ miimode = MII_CFG_MODE_RMIIP;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ miimode = MII_CFG_MODE_MIIM;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ miimode = MII_CFG_MODE_RGMII;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+ MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+ struct xrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err, i;
-+
-+#ifndef SW_POLLING
-+ unsigned int reg = 0;
-+
-+ /* enable auto polling */
-+ for (i = 0; i < priv->num_port; i++)
-+ reg |= BIT(priv->port[i].num);
-+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+ /* setup each port */
-+ for (i = 0; i < priv->num_port; i++)
-+ xrx200_port_config(priv, &priv->port[i]);
-+
-+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("net-xrx200: invalid MAC, using random\n");
-+ eth_random_addr(mac.sa_data);
-+ dev->addr_assign_type |= NET_ADDR_RANDOM;
-+ }
-+
-+ err = eth_mac_addr(dev, &mac);
-+ if (err)
-+ goto err_netdev;
-+
-+ for (i = 0; i < priv->num_port; i++)
-+ if (xrx200_mdio_probe(dev, &priv->port[i]))
-+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+ priv->port[i].num);
-+
-+ return 0;
-+
-+err_netdev:
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+ int i;
-+
-+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+ ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+ ltq_switch_w32(i, PCE_TBL_ADDR);
-+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+ // start the table access:
-+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+ }
-+
-+ /* tell the switch that the microcode is loaded */
-+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* enable clock gate */
-+ clk_enable(hw->clk);
-+
-+ ltq_switch_w32(1, 0);
-+ mdelay(100);
-+ ltq_switch_w32(0, 0);
-+ /*
-+ * TODO: we should really disbale all phys/miis here and explicitly
-+ * enable them in the device secific init function
-+ */
-+
-+ /* disable port fetch/store dma */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32(0, FDMA_PCTRLx(i));
-+ ltq_switch_w32(0, SDMA_PCTRLx(i));
-+ }
-+
-+ /* enable Switch */
-+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+ /* load the pce microcode */
-+ xrx200_pci_microcode();
-+
-+ /* Default unknown Broadcat/Multicast/Unicast port maps */
-+ ltq_switch_w32(0x40, PCE_PMAP1);
-+ ltq_switch_w32(0x40, PCE_PMAP2);
-+ ltq_switch_w32(0x40, PCE_PMAP3);
-+
-+ /* RMON Counter Enable for all physical ports */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+ /* disable auto polling */
-+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+ /* enable port statistic counters */
-+ for (i = 0; i < 7; i++)
-+ ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+ /* set IPG to 12 */
-+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+ /* enable status header, enable CRC */
-+ ltq_pmac_w32_mask(0,
-+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#else
-+ /* disable status header, enable CRC */
-+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
-+ PMAC_HD_CTL);
-+#endif
-+
-+ /* enable port fetch/store dma & VLAN Modification */
-+ for (i = 0; i < 7; i++ ) {
-+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+ }
-+
-+ /* enable special tag insertion on cpu port */
-+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0);
-+
-+ for (i = 0; i < XRX200_MAX_VLAN; i++)
-+ hw->vlan_vid[i] = i;
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+ int i;
-+
-+ /* disable the switch */
-+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+ /* free the channels and IRQs */
-+ for (i = 0; i < 2; i++) {
-+ ltq_dma_free(&hw->chan[i].dma);
-+ if (hw->chan[i].dma.irq)
-+ free_irq(hw->chan[i].dma.irq, hw);
-+ }
-+
-+ /* free the allocated RX ring */
-+ for (i = 0; i < LTQ_DESC_NUM; i++)
-+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+ /* clear the mdio bus */
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+
-+ /* release the clock */
-+ clk_disable(hw->clk);
-+ clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+ hw->mii_bus = mdiobus_alloc();
-+ if (!hw->mii_bus)
-+ return -ENOMEM;
-+
-+ hw->mii_bus->read = xrx200_mdio_rd;
-+ hw->mii_bus->write = xrx200_mdio_wr;
-+ hw->mii_bus->name = "lantiq,xrx200-mdio";
-+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+ if (of_mdiobus_register(hw->mii_bus, np)) {
-+ mdiobus_free(hw->mii_bus);
-+ return -ENXIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+ struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+ if (!id)
-+ return;
-+
-+ memset(p, 0, sizeof(struct xrx200_port));
-+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+ addr = of_get_property(p->phy_node, "reg", NULL);
-+ if (!addr)
-+ return;
-+
-+ p->num = *id;
-+ p->phy_addr = *addr;
-+ p->phy_if = of_get_phy_mode(port);
-+ if (p->phy_addr > 0x10)
-+ p->flags = XRX200_PORT_TYPE_MAC;
-+ else
-+ p->flags = XRX200_PORT_TYPE_PHY;
-+ priv->num_port++;
-+
-+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+ if (gpio_is_valid(p->gpio))
-+ if (!gpio_request(p->gpio, "phy-reset")) {
-+ gpio_direction_output(p->gpio,
-+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+ udelay(100);
-+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+ /* is this port a wan port ? */
-+ if (priv->wan)
-+ priv->hw->wan_map |= BIT(p->num);
-+
-+ priv->port_map |= BIT(p->num);
-+
-+ /* store the port id in the hw struct so we can map ports -> devices */
-+ priv->hw->port_map[p->num] = priv->hw->num_devs;
-+
-+ /* store the phy addr in the hw struct so we can map ports -> phys */
-+ priv->hw->phy_addr[p->num] = p->phy_addr;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+ .ndo_init = xrx200_init,
-+ .ndo_open = xrx200_open,
-+ .ndo_stop = xrx200_close,
-+ .ndo_start_xmit = xrx200_start_xmit,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_get_stats = xrx200_get_stats,
-+ .ndo_tx_timeout = xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface, struct device *dev)
-+{
-+ struct xrx200_priv *priv;
-+ struct device_node *port;
-+ const __be32 *wan;
-+ const u8 *mac;
-+
-+ /* alloc the network device */
-+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+ if (!hw->devs[hw->num_devs])
-+ return;
-+
-+ /* setup the network device */
-+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+ SET_NETDEV_DEV(hw->devs[hw->num_devs], dev);
-+
-+ /* setup our private data */
-+ priv = netdev_priv(hw->devs[hw->num_devs]);
-+ priv->hw = hw;
-+ priv->id = hw->num_devs;
-+
-+ mac = of_get_mac_address(iface);
-+ if (!IS_ERR(mac))
-+ memcpy(priv->mac, mac, ETH_ALEN);
-+
-+ /* is this the wan interface ? */
-+ wan = of_get_property(iface, "lantiq,wan", NULL);
-+ if (wan && (*wan == 1))
-+ priv->wan = 1;
-+
-+ /* should the switch be enabled on this interface ? */
-+ if (of_find_property(iface, "lantiq,switch", NULL))
-+ priv->sw = 1;
-+
-+ /* load the ports that are part of the interface */
-+ for_each_child_of_node(iface, port)
-+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+ xrx200_of_port(priv, port);
-+
-+ /* register the actual device */
-+ if (!register_netdev(hw->devs[hw->num_devs]))
-+ hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np, *phy_np;
-+ struct of_phandle_iterator it;
-+ int err;
-+ int i;
-+
-+ /* load the memory ranges */
-+ for (i = 0; i < 4; i++) {
-+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res[i]) {
-+ dev_err(&pdev->dev, "failed to get resources\n");
-+ return -ENOENT;
-+ }
-+ }
-+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
-+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
-+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
-+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
-+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+ !xrx200_mii_membase || !xrx200_pmac_membase) {
-+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+ return -ENOMEM;
-+ }
-+
-+ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) {
-+ phy_np = it.node;
-+ if (phy_np) {
-+ struct platform_device *phy = of_find_device_by_node(phy_np);
-+
-+ of_node_put(phy_np);
-+ if (!platform_get_drvdata(phy))
-+ return -EPROBE_DEFER;
-+ }
-+ }
-+
-+ /* get the clock */
-+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(xrx200_hw.clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(xrx200_hw.clk);
-+ }
-+
-+ /* bring up the dma engine and IP core */
-+ xrx200_dma_init(&pdev->dev, &xrx200_hw);
-+ xrx200_hw_init(&xrx200_hw);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]);
-+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]);
-+
-+ /* bring up the mdio bus */
-+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+ "lantiq,xrx200-mdio");
-+ if (mdio_np)
-+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+ dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+ /* load the interfaces */
-+ for_each_child_of_node(pdev->dev.of_node, iface_np)
-+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+ xrx200_of_iface(&xrx200_hw, iface_np, &pdev->dev);
-+ else
-+ dev_err(&pdev->dev,
-+ "only %d interfaces allowed\n",
-+ XRX200_MAX_DEV);
-+ }
-+
-+ if (!xrx200_hw.num_devs) {
-+ xrx200_hw_cleanup(&xrx200_hw);
-+ dev_err(&pdev->dev, "failed to load interfaces\n");
-+ return -ENOENT;
-+ }
-+
-+ xrx200sw_init(&xrx200_hw);
-+
-+ /* set wan port mask */
-+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+ for (i = 0; i < xrx200_hw.num_devs; i++) {
-+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i];
-+ }
-+
-+ /* setup NAPI */
-+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+ platform_set_drvdata(pdev, &xrx200_hw);
-+
-+ return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct xrx200_priv *priv;
-+
-+ if (!dev)
-+ return 0;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* free stack related instances */
-+ netif_stop_queue(dev);
-+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+ /* shut down hardware */
-+ xrx200_hw_cleanup(&xrx200_hw);
-+
-+ /* remove the actual device */
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+ { .compatible = "lantiq,xrx200-net" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+ .probe = xrx200_probe,
-+ .remove = xrx200_remove,
-+ .driver = {
-+ .name = "lantiq,xrx200-net",
-+ .of_match_table = xrx200_match,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h
-@@ -0,0 +1,1328 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
-+ *
-+ * VR9 switch registers extracted from 310TUJ0 switch api
-+ * WARNING mult values of 0x00 may not be correct
-+ *
-+ */
-+
-+enum {
-+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
-+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
-+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
-+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
-+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
-+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
-+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
-+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
-+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
-+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
-+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
-+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
-+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
-+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
-+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
-+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
-+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
-+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
-+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
-+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
-+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
-+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
-+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
-+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
-+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
-+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
-+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
-+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
-+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
-+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
-+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
-+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
-+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
-+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
-+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
-+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
-+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
-+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
-+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
-+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
-+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
-+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
-+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
-+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
-+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
-+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
-+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
-+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
-+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
-+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
-+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
-+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
-+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
-+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
-+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
-+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
-+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
-+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
-+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
-+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
-+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
-+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
-+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
-+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
-+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
-+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
-+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
-+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
-+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
-+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
-+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
-+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
-+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
-+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
-+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
-+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
-+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
-+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
-+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
-+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
-+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
-+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
-+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
-+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
-+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
-+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
-+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
-+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
-+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
-+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
-+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
-+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
-+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
-+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
-+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
-+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
-+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
-+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
-+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
-+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
-+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
-+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
-+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
-+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
-+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
-+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
-+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
-+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
-+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
-+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
-+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
-+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
-+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
-+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
-+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
-+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
-+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
-+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
-+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
-+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
-+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
-+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
-+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
-+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
-+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
-+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
-+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
-+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
-+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
-+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
-+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
-+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
-+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
-+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
-+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
-+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
-+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
-+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
-+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
-+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
-+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
-+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
-+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
-+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
-+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
-+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
-+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
-+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
-+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
-+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
-+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
-+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
-+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
-+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
-+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
-+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
-+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
-+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
-+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
-+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
-+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
-+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
-+// XRX200_BM_CISEL_PORT, /* Port Number */
-+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
-+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
-+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
-+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
-+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
-+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
-+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
-+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
-+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
-+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
-+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
-+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
-+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
-+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
-+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
-+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
-+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
-+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
-+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
-+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
-+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
-+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
-+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
-+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
-+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
-+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
-+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
-+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
-+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
-+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
-+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
-+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
-+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
-+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
-+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
-+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
-+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
-+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
-+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
-+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
-+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
-+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
-+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
-+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
-+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
-+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
-+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
-+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
-+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
-+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
-+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
-+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
-+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
-+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
-+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
-+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
-+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
-+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
-+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
-+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
-+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
-+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
-+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
-+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
-+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
-+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
-+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
-+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
-+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
-+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
-+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
-+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
-+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
-+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
-+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
-+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
-+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
-+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
-+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
-+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
-+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
-+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
-+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
-+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
-+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
-+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
-+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
-+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
-+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
-+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
-+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
-+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
-+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
-+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
-+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
-+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
-+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
-+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
-+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
-+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
-+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
-+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
-+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
-+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
-+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
-+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
-+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
-+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
-+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
-+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
-+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
-+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
-+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
-+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
-+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
-+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
-+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
-+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
-+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
-+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
-+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
-+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
-+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
-+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
-+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
-+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
-+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
-+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
-+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
-+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
-+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
-+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
-+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
-+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
-+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
-+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
-+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
-+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
-+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
-+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
-+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
-+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
-+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
-+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
-+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
-+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
-+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
-+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
-+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
-+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
-+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
-+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
-+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
-+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
-+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
-+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
-+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
-+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
-+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
-+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
-+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
-+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
-+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
-+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
-+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
-+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
-+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
-+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
-+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
-+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
-+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
-+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
-+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
-+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
-+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
-+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
-+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
-+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
-+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
-+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
-+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
-+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
-+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
-+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
-+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
-+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
-+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
-+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
-+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
-+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
-+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
-+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
-+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
-+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
-+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
-+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
-+// XRX200_MAC_TEST, /* MAC Test Register */
-+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
-+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
-+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
-+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
-+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
-+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
-+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
-+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
-+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
-+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
-+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
-+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
-+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
-+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
-+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
-+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
-+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
-+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
-+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
-+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
-+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
-+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
-+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
-+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
-+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
-+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
-+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
-+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
-+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
-+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
-+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
-+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
-+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
-+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
-+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
-+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
-+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
-+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
-+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
-+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
-+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
-+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
-+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
-+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
-+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
-+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
-+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
-+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
-+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
-+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
-+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
-+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
-+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
-+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
-+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
-+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
-+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
-+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
-+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
-+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
-+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
-+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
-+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
-+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
-+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
-+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
-+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
-+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
-+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
-+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
-+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
-+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
-+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
-+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
-+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
-+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
-+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
-+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
-+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
-+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
-+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
-+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
-+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
-+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
-+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
-+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
-+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
-+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
-+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
-+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
-+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
-+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
-+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
-+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
-+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
-+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
-+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
-+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
-+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
-+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
-+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
-+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
-+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
-+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
-+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
-+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
-+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
-+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
-+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
-+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
-+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
-+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
-+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
-+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
-+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
-+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
-+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
-+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
-+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
-+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
-+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
-+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
-+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
-+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
-+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
-+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
-+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
-+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
-+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
-+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
-+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
-+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
-+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
-+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
-+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
-+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
-+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
-+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
-+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
-+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
-+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
-+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
-+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
-+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
-+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
-+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
-+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
-+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
-+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
-+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
-+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
-+// XRX200_SDMA_IER_FERR, /* Frame Error */
-+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
-+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
-+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
-+// XRX200_SDMA_ISR_FERR, /* Frame Error */
-+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
-+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
-+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
-+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
-+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
-+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
-+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
-+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
-+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
-+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
-+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
-+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
-+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
-+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
-+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
-+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
-+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
-+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
-+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
-+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
-+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
-+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
-+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
-+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
-+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
-+};
-+
-+
-+struct xrx200sw_reg {
-+ int offset;
-+ int shift;
-+ int size;
-+ int mult;
-+} xrx200sw_reg[] = {
-+// offeset shift size mult
-+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
-+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
-+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
-+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
-+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
-+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
-+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
-+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
-+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
-+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
-+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
-+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
-+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
-+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
-+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
-+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
-+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
-+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
-+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
-+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
-+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
-+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
-+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
-+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
-+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
-+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
-+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
-+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
-+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
-+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
-+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
-+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
-+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
-+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
-+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
-+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
-+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
-+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
-+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
-+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
-+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
-+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
-+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
-+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
-+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
-+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
-+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
-+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
-+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
-+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
-+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
-+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
-+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
-+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
-+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
-+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
-+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
-+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
-+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
-+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
-+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
-+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
-+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
-+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
-+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
-+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
-+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
-+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
-+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
-+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
-+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
-+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
-+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
-+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
-+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
-+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
-+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
-+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
-+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
-+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
-+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
-+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
-+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
-+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
-+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
-+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
-+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
-+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
-+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
-+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
-+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
-+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
-+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
-+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
-+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
-+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
-+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
-+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
-+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
-+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
-+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
-+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
-+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
-+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
-+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
-+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
-+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
-+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
-+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
-+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
-+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
-+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
-+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
-+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
-+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
-+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
-+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
-+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
-+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
-+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
-+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
-+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
-+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
-+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
-+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
-+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
-+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
-+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
-+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
-+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
-+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
-+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
-+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
-+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
-+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
-+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
-+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
-+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
-+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
-+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
-+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
-+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
-+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
-+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
-+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
-+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
-+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
-+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
-+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
-+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
-+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
-+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
-+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
-+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
-+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
-+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
-+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
-+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
-+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
-+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
-+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
-+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
-+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
-+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
-+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
-+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
-+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
-+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
-+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
-+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
-+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
-+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
-+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
-+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
-+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
-+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
-+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
-+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
-+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
-+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
-+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
-+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
-+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
-+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
-+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
-+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
-+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
-+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
-+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
-+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
-+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
-+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
-+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
-+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
-+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
-+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
-+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
-+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
-+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
-+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
-+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
-+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
-+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
-+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
-+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
-+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
-+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
-+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
-+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
-+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
-+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
-+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
-+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
-+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
-+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
-+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
-+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
-+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
-+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
-+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
-+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
-+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
-+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
-+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
-+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
-+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
-+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
-+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
-+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
-+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
-+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
-+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
-+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
-+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
-+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
-+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
-+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
-+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
-+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
-+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
-+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
-+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
-+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
-+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
-+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
-+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
-+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
-+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
-+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
-+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
-+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
-+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
-+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
-+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
-+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
-+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
-+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
-+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
-+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
-+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
-+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
-+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
-+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
-+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
-+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
-+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
-+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
-+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
-+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
-+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
-+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
-+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
-+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
-+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
-+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
-+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
-+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
-+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
-+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
-+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
-+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
-+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
-+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
-+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
-+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
-+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
-+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
-+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
-+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
-+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
-+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
-+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
-+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
-+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
-+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
-+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
-+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
-+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
-+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
-+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
-+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
-+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
-+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
-+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
-+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
-+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
-+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
-+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
-+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
-+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
-+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
-+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
-+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
-+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
-+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
-+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
-+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
-+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
-+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
-+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
-+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
-+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
-+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
-+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
-+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
-+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
-+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
-+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
-+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
-+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
-+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
-+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
-+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
-+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
-+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
-+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
-+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
-+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
-+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
-+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
-+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
-+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
-+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
-+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
-+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
-+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
-+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
-+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
-+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
-+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
-+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
-+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
-+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
-+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
-+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
-+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
-+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
-+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
-+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
-+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
-+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
-+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
-+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
-+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
-+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
-+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
-+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
-+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
-+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
-+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
-+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
-+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
-+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
-+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
-+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
-+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
-+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
-+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
-+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
-+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
-+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
-+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
-+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
-+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
-+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
-+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
-+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
-+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
-+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
-+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
-+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
-+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
-+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
-+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
-+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
-+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
-+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
-+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
-+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
-+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
-+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
-+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
-+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
-+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
-+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
-+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
-+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
-+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
-+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
-+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
-+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
-+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
-+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
-+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
-+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
-+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
-+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
-+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
-+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
-+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
-+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
-+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
-+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
-+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
-+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
-+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
-+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
-+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
-+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
-+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
-+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
-+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
-+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
-+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
-+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
-+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
-+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
-+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
-+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
-+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
-+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
-+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
-+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
-+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
-+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
-+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
-+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
-+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
-+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
-+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
-+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
-+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
-+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
-+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
-+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
-+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
-+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
-+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
-+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
-+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
-+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
-+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
-+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
-+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
-+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
-+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
-+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
-+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
-+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
-+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
-+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
-+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
-+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
-+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
-+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
-+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
-+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
-+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
-+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
-+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
-+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
-+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
-+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
-+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
-+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
-+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
-+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
-+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
-+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
-+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
-+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
-+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
-+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
-+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
-+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
-+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
-+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
-+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
-+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
-+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
-+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
-+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
-+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
-+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
-+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
-+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
-+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
-+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
-+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
-+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
-+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
-+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
-+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
-+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
-+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
-+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
-+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
-+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
-+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
-+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
-+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
-+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
-+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
-+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
-+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
-+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
-+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
-+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
-+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
-+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
-+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
-+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
-+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
-+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
-+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
-+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
-+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
-+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
-+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
-+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
-+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
-+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
-+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
-+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
-+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
-+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
-+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
-+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
-+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
-+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
-+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
-+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
-+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
-+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
-+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
-+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
-+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
-+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
-+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
-+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
-+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
-+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
-+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
-+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
-+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
-+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
-+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
-+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
-+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
-+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
-+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
-+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
-+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
-+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
-+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
-+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
-+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
-+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
-+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
-+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
-+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
-+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
-+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
-+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
-+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
-+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
-+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
-+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
-+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
-+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
-+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
-+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
-+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
-+};
-+
-+
diff --git a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
deleted file mode 100644
index 8fd29161fe8..00000000000
--- a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Sun, 7 Jul 2019 21:48:56 +0200
-Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader
-
-Upstream, the GPHY Firmware loader has been merged into the DSA switch
-driver. But we don't use the driver yet, so bring it back.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++
- .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++
- arch/mips/configs/xway_defconfig | 1 +
- arch/mips/lantiq/Kconfig | 4 +
- drivers/soc/lantiq/Makefile | 1 +
- drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++
- 6 files changed, 284 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
- create mode 100644 drivers/soc/lantiq/gphy.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
-@@ -0,0 +1,37 @@
-+Lantiq XWAY SoC GPHY binding
-+============================
-+
-+This binding describes a software-defined ethernet PHY, provided by the RCU
-+module on newer Lantiq XWAY SoCs (xRX200 and newer).
-+
-+-------------------------------------------------------------------------------
-+Required properties:
-+- compatible : Should be one of
-+ "lantiq,xrx200-gphy"
-+ "lantiq,xrx200a1x-gphy"
-+ "lantiq,xrx200a2x-gphy"
-+ "lantiq,xrx300-gphy"
-+ "lantiq,xrx330-gphy"
-+- reg : Addrress of the GPHY FW load address register
-+- resets : Must reference the RCU GPHY reset bit
-+- reset-names : One entry, value must be "gphy" or optional "gphy2"
-+- clocks : A reference to the (PMU) GPHY clock gate
-+
-+Optional properties:
-+- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
-+ <dt-bindings/mips/lantiq_xway_gphy.h>
-+
-+
-+-------------------------------------------------------------------------------
-+Example for the GPHys on the xRX200 SoCs:
-+
-+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-+ gphy0: gphy@20 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x20 0x4>;
-+
-+ resets = <&reset0 31 30>, <&reset1 7 7>;
-+ reset-names = "gphy", "gphy2";
-+ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
---- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
-+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
-@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
-+ gphy0: gphy@20 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x20 0x4>;
-+
-+ resets = <&reset0 31 30>, <&reset1 7 7>;
-+ reset-names = "gphy", "gphy2";
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
-+
-+ gphy1: gphy@68 {
-+ compatible = "lantiq,xrx200a2x-gphy";
-+ reg = <0x68 0x4>;
-+
-+ resets = <&reset0 29 28>, <&reset1 6 6>;
-+ reset-names = "gphy", "gphy2";
-+ lantiq,gphy-mode = <GPHY_MODE_GE>;
-+ };
-+
- reset0: reset-controller@10 {
- compatible = "lantiq,xrx200-reset";
- reg = <0x10 4>, <0x14 4>;
---- a/arch/mips/configs/xway_defconfig
-+++ b/arch/mips/configs/xway_defconfig
-@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y
- # CONFIG_COMPAT_BRK is not set
- CONFIG_LANTIQ=y
- CONFIG_PCI_LANTIQ=y
-+CONFIG_XRX200_PHY_FW=y
- CONFIG_CPU_MIPS32_R2=y
- CONFIG_MIPS_VPE_LOADER=y
- CONFIG_NR_CPUS=2
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI
- depends on PCIE_LANTIQ && PCI_MSI
- default y
-
-+config XRX200_PHY_FW
-+ bool "XRX200 PHY firmware loader"
-+ depends on SOC_XWAY
-+
- endif
---- a/drivers/soc/lantiq/Makefile
-+++ b/drivers/soc/lantiq/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0-only
- obj-y += fpi-bus.o
-+obj-$(CONFIG_XRX200_PHY_FW) += gphy.o
---- /dev/null
-+++ b/drivers/soc/lantiq/gphy.c
-@@ -0,0 +1,235 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@phrozen.org>
-+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/firmware.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/property.h>
-+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
-+
-+struct xway_gphy_priv {
-+ struct clk *gphy_clk_gate;
-+ struct reset_control *gphy_reset;
-+ struct reset_control *gphy_reset2;
-+ void __iomem *membase;
-+ char *fw_name;
-+};
-+
-+struct xway_gphy_match_data {
-+ char *fe_firmware_name;
-+ char *ge_firmware_name;
-+};
-+
-+static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
-+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
-+};
-+
-+static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
-+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
-+};
-+
-+static const struct xway_gphy_match_data xrx300_gphy_data = {
-+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
-+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
-+};
-+
-+static const struct of_device_id xway_gphy_match[] = {
-+ { .compatible = "lantiq,xrx200-gphy", .data = NULL },
-+ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
-+ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
-+ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-+ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, xway_gphy_match);
-+
-+static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
-+ dma_addr_t *dev_addr)
-+{
-+ const struct firmware *fw;
-+ void *fw_addr;
-+ dma_addr_t dma_addr;
-+ size_t size;
-+ int ret;
-+
-+ ret = request_firmware(&fw, priv->fw_name, dev);
-+ if (ret) {
-+ dev_err(dev, "failed to load firmware: %s, error: %i\n",
-+ priv->fw_name, ret);
-+ return ret;
-+ }
-+
-+ /*
-+ * GPHY cores need the firmware code in a persistent and contiguous
-+ * memory area with a 16 kB boundary aligned start address.
-+ */
-+ size = fw->size + XRX200_GPHY_FW_ALIGN;
-+
-+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
-+ if (fw_addr) {
-+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
-+ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
-+ memcpy(fw_addr, fw->data, fw->size);
-+ } else {
-+ dev_err(dev, "failed to alloc firmware memory\n");
-+ ret = -ENOMEM;
-+ }
-+
-+ release_firmware(fw);
-+
-+ return ret;
-+}
-+
-+static int xway_gphy_of_probe(struct platform_device *pdev,
-+ struct xway_gphy_priv *priv)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct xway_gphy_match_data *gphy_fw_name_cfg;
-+ u32 gphy_mode;
-+ int ret;
-+ struct resource *res_gphy;
-+
-+ gphy_fw_name_cfg = of_device_get_match_data(dev);
-+
-+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy"))
-+ switch (ltq_soc_type()) {
-+ case SOC_TYPE_VR9:
-+ gphy_fw_name_cfg = &xrx200a1x_gphy_data;
-+ break;
-+ case SOC_TYPE_VR9_2:
-+ gphy_fw_name_cfg = &xrx200a2x_gphy_data;
-+ break;
-+ }
-+
-+ priv->gphy_clk_gate = devm_clk_get(dev, NULL);
-+ if (IS_ERR(priv->gphy_clk_gate)) {
-+ dev_err(dev, "Failed to lookup gate clock\n");
-+ return PTR_ERR(priv->gphy_clk_gate);
-+ }
-+
-+ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->membase = devm_ioremap_resource(dev, res_gphy);
-+ if (IS_ERR(priv->membase))
-+ return PTR_ERR(priv->membase);
-+
-+ priv->gphy_reset = devm_reset_control_get(dev, "gphy");
-+ if (IS_ERR(priv->gphy_reset)) {
-+ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER)
-+ dev_err(dev, "Failed to lookup gphy reset\n");
-+ return PTR_ERR(priv->gphy_reset);
-+ }
-+
-+ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2");
-+ if (IS_ERR(priv->gphy_reset2))
-+ return PTR_ERR(priv->gphy_reset2);
-+
-+ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode);
-+ /* Default to GE mode */
-+ if (ret)
-+ gphy_mode = GPHY_MODE_GE;
-+
-+ switch (gphy_mode) {
-+ case GPHY_MODE_FE:
-+ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name;
-+ break;
-+ case GPHY_MODE_GE:
-+ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name;
-+ break;
-+ default:
-+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xway_gphy_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct xway_gphy_priv *priv;
-+ dma_addr_t fw_addr = 0;
-+ int ret;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ ret = xway_gphy_of_probe(pdev, priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(priv->gphy_clk_gate);
-+ if (ret)
-+ return ret;
-+
-+ ret = xway_gphy_load(dev, priv, &fw_addr);
-+ if (ret) {
-+ clk_disable_unprepare(priv->gphy_clk_gate);
-+ return ret;
-+ }
-+
-+ reset_control_assert(priv->gphy_reset);
-+ reset_control_assert(priv->gphy_reset2);
-+
-+ iowrite32be(fw_addr, priv->membase);
-+
-+ reset_control_deassert(priv->gphy_reset);
-+ reset_control_deassert(priv->gphy_reset2);
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ return ret;
-+}
-+
-+static int xway_gphy_remove(struct platform_device *pdev)
-+{
-+ struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
-+
-+ iowrite32be(0, priv->membase);
-+
-+ clk_disable_unprepare(priv->gphy_clk_gate);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver xway_gphy_driver = {
-+ .probe = xway_gphy_probe,
-+ .remove = xway_gphy_remove,
-+ .driver = {
-+ .name = "xway-rcu-gphy",
-+ .of_match_table = xway_gphy_match,
-+ },
-+};
-+
-+module_platform_driver(xway_gphy_driver);
-+
-+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
-+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
-+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
-+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-+MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
index 476cc7eb8f9..3122d40c92c 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
@@ -11,65 +11,41 @@ lantiq_setup_interfaces()
local board="$1"
case "$board" in
- alphanetworks,asl56026)
- ucidef_add_switch "switch0" \
- "2:lan" "3:lan" "6t@eth0"
+ alphanetworks,asl56026|\
+ arcadyan,vg3503j)
+ ucidef_set_interface_lan "lan1 lan2"
;;
arcadyan,arv7519rw22)
- ucidef_add_switch "switch0" \
- "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
- ;;
- arcadyan,vg3503j)
- ucidef_add_switch "switch0" \
- "2:lan:2" "4:lan:1" "6t@eth0"
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
;;
arcadyan,vgv7510kw22-brn|\
- arcadyan,vgv7510kw22-nor)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
- ;;
+ arcadyan,vgv7510kw22-nor|\
arcadyan,vgv7519-brn|\
arcadyan,vgv7519-nor|\
+ bt,homehub-v5a|\
lantiq,easy80920-nand|\
- lantiq,easy80920-nor)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+ lantiq,easy80920-nor|\
+ zyxel,p-2812hnu-f1|\
+ zyxel,p-2812hnu-f3)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz3390|\
avm,fritz7360sl|\
avm,fritz7360-v2|\
- avm,fritz7362sl)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
- ;;
- avm,fritz7430)
- ucidef_add_switch "switch0" \
- "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
- ;;
- bt,homehub-v5a)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
- ;;
- buffalo,wbmr-300hpd)
- ucidef_add_switch "switch0" \
- "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
- ;;
+ avm,fritz7362sl|\
+ avm,fritz7430|\
+ buffalo,wbmr-300hpd|\
tplink,tdw8970|\
- tplink,tdw8980)
- ucidef_add_switch "switch0" \
- "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
- ;;
+ tplink,tdw8980|\
tplink,vr200|\
tplink,vr200v)
- ucidef_add_switch "switch0" \
- "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
- zyxel,p-2812hnu-f1|\
- zyxel,p-2812hnu-f3)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
+ avm,fritz7412|\
+ netgear,dm200)
+ ucidef_set_interface_lan "lan"
;;
*)
ucidef_set_interface_lan 'eth0'
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version
new file mode 100644
index 00000000000..45bef9385bd
--- /dev/null
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ *)
+ ucidef_set_compat_version "1.1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xrx200/config-5.10 b/target/linux/lantiq/xrx200/config-5.10
index 51d8b6dcdf7..d231acda838 100644
--- a/target/linux/lantiq/xrx200/config-5.10
+++ b/target/linux/lantiq/xrx200/config-5.10
@@ -18,6 +18,7 @@ CONFIG_CRYPTO_ZSTD=y
CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GRO_CELLS=y
CONFIG_HWMON=y
CONFIG_HW_RANDOM=y
CONFIG_ICPLUS_PHY=y
@@ -27,7 +28,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_ISDN is not set
-CONFIG_LANTIQ_XRX200_LEGACY=y
+CONFIG_LANTIQ_XRX200=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MIPS_MT=y
@@ -50,7 +51,12 @@ CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LANTIQ_GSWIP=y
+CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NR_CPUS=2
CONFIG_PADATA=y
@@ -77,7 +83,6 @@ CONFIG_SMP=y
CONFIG_SMP_UP=y
CONFIG_SOC_TYPE_XWAY=y
CONFIG_SOC_XWAY=y
-CONFIG_SWCONFIG_LEDS=y
CONFIG_SYNC_R4K=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
@@ -88,7 +93,6 @@ CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
CONFIG_XPS=y
-CONFIG_XRX200_PHY_FW=y
CONFIG_XXHASH=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4
index 47820142853..c24b89cb8fd 100644
--- a/target/linux/lantiq/xrx200/config-5.4
+++ b/target/linux/lantiq/xrx200/config-5.4
@@ -17,6 +17,7 @@ CONFIG_CRYPTO_ZSTD=y
CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GRO_CELLS=y
CONFIG_HWMON=y
CONFIG_ICPLUS_PHY=y
CONFIG_IFX_VPE_EXT=y
@@ -25,7 +26,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_ISDN is not set
-CONFIG_LANTIQ_XRX200_LEGACY=y
+CONFIG_LANTIQ_XRX200=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MIPS_MT=y
@@ -47,7 +48,12 @@ CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LANTIQ_GSWIP=y
+CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NR_CPUS=2
CONFIG_PADATA=y
@@ -56,6 +62,7 @@ CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_LANTIQ=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
+CONFIG_PHYLINK=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
@@ -72,7 +79,6 @@ CONFIG_SENSORS_LTQ_CPUTEMP=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_UP=y
-CONFIG_SWCONFIG_LEDS=y
CONFIG_SYNC_R4K=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
@@ -83,7 +89,6 @@ CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
CONFIG_XPS=y
-CONFIG_XRX200_PHY_FW=y
CONFIG_XXHASH=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/lantiq/xrx200/target.mk b/target/linux/lantiq/xrx200/target.mk
index f7dc8ac1c73..c89f4bb83ce 100644
--- a/target/linux/lantiq/xrx200/target.mk
+++ b/target/linux/lantiq/xrx200/target.mk
@@ -15,8 +15,7 @@ DEFAULT_PACKAGES+=kmod-leds-gpio \
ltq-vdsl-app \
dsl-vrx200-firmware-xdsl-a \
dsl-vrx200-firmware-xdsl-b-patch \
- ppp-mod-pppoa \
- swconfig
+ ppp-mod-pppoa
define Target/Description
Lantiq XRX200
diff --git a/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq
new file mode 100644
index 00000000000..5f059ee974d
--- /dev/null
+++ b/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq
@@ -0,0 +1,5 @@
+set_preinit_iface() {
+ ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_iface
diff --git a/target/linux/lantiq/xway/config-5.10 b/target/linux/lantiq/xway/config-5.10
index 0716679aeed..cfbf08ab9fa 100644
--- a/target/linux/lantiq/xway/config-5.10
+++ b/target/linux/lantiq/xway/config-5.10
@@ -41,6 +41,7 @@ CONFIG_RTL8367_PHY=y
CONFIG_SGL_ALLOC=y
CONFIG_SOC_TYPE_XWAY=y
CONFIG_SOC_XWAY=y
+CONFIG_SWCONFIG=y
CONFIG_UBIFS_FS=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
diff --git a/target/linux/lantiq/xway/config-5.4 b/target/linux/lantiq/xway/config-5.4
index 3f585762420..42004b0d4d7 100644
--- a/target/linux/lantiq/xway/config-5.4
+++ b/target/linux/lantiq/xway/config-5.4
@@ -37,6 +37,7 @@ CONFIG_RTL8366_SMI=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
CONFIG_SGL_ALLOC=y
+CONFIG_SWCONFIG=y
CONFIG_UBIFS_FS=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
diff --git a/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq
new file mode 100644
index 00000000000..5f059ee974d
--- /dev/null
+++ b/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq
@@ -0,0 +1,5 @@
+set_preinit_iface() {
+ ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_iface
diff --git a/target/linux/lantiq/xway_legacy/config-5.10 b/target/linux/lantiq/xway_legacy/config-5.10
index 0bc9bda1b81..c24dd77dc02 100644
--- a/target/linux/lantiq/xway_legacy/config-5.10
+++ b/target/linux/lantiq/xway_legacy/config-5.10
@@ -32,6 +32,7 @@ CONFIG_RTL8367_PHY=y
CONFIG_SGL_ALLOC=y
CONFIG_SOC_TYPE_XWAY=y
CONFIG_SOC_XWAY=y
+CONFIG_SWCONFIG=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
diff --git a/target/linux/lantiq/xway_legacy/config-5.4 b/target/linux/lantiq/xway_legacy/config-5.4
index 4930762160c..a44822ee91f 100644
--- a/target/linux/lantiq/xway_legacy/config-5.4
+++ b/target/linux/lantiq/xway_legacy/config-5.4
@@ -30,6 +30,7 @@ CONFIG_RTL8366_SMI=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
CONFIG_SGL_ALLOC=y
+CONFIG_SWCONFIG=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y