upgrade ppc40x to 2.6.28.10

SVN-Revision: 15755
This commit is contained in:
Imre Kaloz 2009-05-10 16:44:32 +00:00
parent 33c38fba27
commit ba7f77b25f
6 changed files with 9 additions and 340 deletions

View File

@ -9,9 +9,9 @@ include $(TOPDIR)/rules.mk
ARCH:=powerpc ARCH:=powerpc
BOARD:=ppc40x BOARD:=ppc40x
BOARDNAME:=AMCC/IBM PPC40x BOARDNAME:=AMCC/IBM PPC40x
FEATURES:=squashfs FEATURES:=squashfs usb
LINUX_VERSION:=2.6.27.22 LINUX_VERSION:=2.6.28.10
LINUX_KARCH:=powerpc LINUX_KARCH:=powerpc
include $(INCLUDE_DIR)/target.mk include $(INCLUDE_DIR)/target.mk

View File

@ -63,6 +63,7 @@ CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_LMB=y CONFIG_HAVE_LMB=y
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HCU4 is not set
# CONFIG_HIGHMEM is not set # CONFIG_HIGHMEM is not set
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_HZ=250 CONFIG_HZ=250

View File

@ -1,135 +0,0 @@
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -14,6 +14,15 @@
# help
# This option enables support for the CPCI405 board.
+config ACADIA
+ bool "Acadia"
+ depends on 40x
+ default n
+ select PPC40x_SIMPLE
+ select 405EZ
+ help
+ This option enables support for the AMCC 405EZ Acadia evaluation board.
+
config EP405
bool "EP405/EP405PC"
depends on 40x
@@ -93,6 +102,13 @@ config XILINX_VIRTEX_GENERIC_BOARD
Most Virtex designs should use this unless it needs to do some
special configuration at board probe time.
+config PPC40x_SIMPLE
+ bool "Simple PowerPC 40x board support"
+ depends on 40x
+ default n
+ help
+ This option enables the simple PowerPC 40x platform support.
+
# 40x specific CPU modules, selected based on the board above.
config NP405H
bool
@@ -118,6 +134,12 @@ config 405EX
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
+config 405EZ
+ bool
+ select IBM_NEW_EMAC_NO_FLOW_CTRL
+ select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ select IBM_NEW_EMAC_MAL_COMMON_ERR
+
config 405GPR
bool
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_MAKALU) += makalu.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
obj-$(CONFIG_EP405) += ep405.o
+obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o
--- /dev/null
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -0,0 +1,80 @@
+/*
+ * Generic PowerPC 40x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips. This is
+ * mostly used for eval boards or other simple and "generic" 44x boards. If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc40x_of_bus[] = {
+ { .compatible = "ibm,plb3", },
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init ppc40x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc40x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code. This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+ "amcc,acadia"
+};
+
+static int __init ppc40x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(board); i++) {
+ if (of_flat_dt_is_compatible(root, board[i])) {
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+define_machine(ppc40x_simple) {
+ .name = "PowerPC 40x Platform",
+ .probe = ppc40x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};

View File

@ -1,197 +0,0 @@
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -68,7 +68,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
+ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
+ cuboot-acadia.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -211,6 +212,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag
# Board ports in arch/powerpc/platform/40x/Kconfig
image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_WALNUT) += treeImage.walnut
+image-$(CONFIG_ACADIA) += cuImage.acadia
# Board ports in arch/powerpc/platform/44x/Kconfig
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-acadia.c
@@ -0,0 +1,174 @@
+/*
+ * Old U-boot compatibility for Acadia
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
+
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+
+#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
+#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
+
+static void get_clocks(void)
+{
+ unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
+ unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
+ unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long est; /* current estimate */
+ unsigned long baud;
+ void *np;
+
+ /* read the sysclk value from the CPLD */
+ sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
+
+ /*
+ * Read PLL Mode registers
+ */
+ cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
+ cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
+
+ /*
+ * Determine forward divider A
+ */
+ pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B
+ */
+ pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+ if (pllFwdDivB == 0)
+ pllFwdDivB = 8;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (pllFbkDiv == 0)
+ pllFbkDiv = 256;
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
+
+ /*
+ * Determine PLB_DIV.
+ */
+ pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+ if (pllPlbDiv == 0)
+ pllPlbDiv = 16;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+ if (pllExtBusDiv == 0)
+ pllExtBusDiv = 16;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+ if (pllOpbDiv == 0)
+ pllOpbDiv = 16;
+
+ /* There is a bug in U-Boot that prevents us from using
+ * bd.bi_opbfreq because U-Boot doesn't populate it for
+ * 405EZ. We get to calculate it, yay!
+ */
+ freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
+
+ freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
+
+ plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
+ pllFwdDivB : pllFwdDiv) *
+ pllFbkDiv) / pllFwdDivB);
+
+ np = find_node_by_alias("serial0");
+ if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
+ fatal("no current-speed property\n\r");
+
+ udiv = 256; /* Assume lowest possible serial clk */
+ div = plloutb / (16 * baud); /* total divisor */
+ umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */
+ diff = 256; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (256) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 256; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+ freqUART = plloutb / udiv;
+
+ dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
+ dt_fixup_clock("/plb/ebc", freqEBC);
+ dt_fixup_clock("/plb/opb", freqOPB);
+ dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
+ dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
+}
+
+static void acadia_fixups(void)
+{
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+ get_clocks();
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = acadia_fixups;
+ platform_ops.exit = ibm40x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}

View File

@ -263,7 +263,7 @@
+}; +};
--- a/arch/powerpc/boot/Makefile --- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile
@@ -69,7 +69,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 @@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
@ -272,7 +272,7 @@
src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot)) src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -213,6 +213,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag @@ -214,6 +214,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag
image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia image-$(CONFIG_ACADIA) += cuImage.acadia
@ -282,7 +282,7 @@
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
--- a/arch/powerpc/platforms/40x/Kconfig --- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig
@@ -41,6 +41,16 @@ config KILAUEA @@ -49,6 +49,16 @@ config KILAUEA
help help
This option enables support for the AMCC PPC405EX evaluation board. This option enables support for the AMCC PPC405EX evaluation board.

View File

@ -296,7 +296,7 @@
+}; +};
--- a/arch/powerpc/boot/Makefile --- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile
@@ -69,7 +69,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 @@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
@ -305,7 +305,7 @@
src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot)) src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -214,6 +214,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40 @@ -215,6 +215,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40
image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia image-$(CONFIG_ACADIA) += cuImage.acadia
image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1
@ -315,7 +315,7 @@
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
--- a/arch/powerpc/platforms/40x/Kconfig --- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig
@@ -51,6 +51,16 @@ config MAGICBOXV1 @@ -59,6 +59,16 @@ config MAGICBOXV1
help help
This option enables support for the Magicbox v1 board. This option enables support for the Magicbox v1 board.