mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
ath79: add support for TP-Link Archer c7 v2
Signed-off-by: Sibren Vasse <github@sibrenvasse.nl>
This commit is contained in:
Sibren Vasse
John Crispin
parent
2a7e03af37
commit
ba74b45476
@ -40,6 +40,12 @@ ath79_setup_interfaces()
|
||||
"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
|
||||
;;
|
||||
|
||||
"tplink,tl-archer-c7-v2")
|
||||
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
|
||||
;;
|
||||
|
||||
"tplink,tl-mr3020-v1")
|
||||
ucidef_set_interface_lan "eth0.1"
|
||||
ucidef_add_switch "switch0" "0@eth0" "1:lan"
|
||||
|
||||
@ -87,10 +87,14 @@ board=$(board_name)
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
openmesh,om5p-ac-v2)
|
||||
"openmesh,om5p-ac-v2")
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
|
||||
;;
|
||||
"tplink,tl-archer-c7-v2")
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
|
||||
;;
|
||||
"ubnt,ubnt-unifiac-lite")
|
||||
ath10kcal_extract "EEPROM" 20480 2116
|
||||
;;
|
||||
|
||||
16
target/linux/ath79/dts/qca9558_tl-archer-c7-v2.dts
Normal file
16
target/linux/ath79/dts/qca9558_tl-archer-c7-v2.dts
Normal file
@ -0,0 +1,16 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9558_tl-archer-c7.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-archer-c7-v2", "qca,qca9558";
|
||||
model = "TP-Link Archer C7 Version 2";
|
||||
};
|
||||
|
||||
&rfkill {
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
232
target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
Normal file
232
target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
Normal file
@ -0,0 +1,232 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9557.dtsi"
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-status = &system;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system: system {
|
||||
label = "tp-link:green:system";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "tp-link:green:usb1";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port0>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "tp-link:green:usb2";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
trigger-sources = <&hub_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "tp-link:green:wlan2g";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
qss {
|
||||
label = "tp-link:green:qss";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "tp-link:green:wlan5g";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
rfkill: wifi {
|
||||
linux,code = <KEY_RFKILL>;
|
||||
linux,input-type = <EV_SW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_usb1_power {
|
||||
gpio-export,name = "tp-link:power:usb1";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_usb2_power {
|
||||
gpio-export,name = "tp-link:power:usb2";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
|
||||
hub_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0xfd0000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
|
||||
0x50 0xc737c737 /* LED_CTRL0 */
|
||||
0x54 0x00000000 /* LED_CTRL1 */
|
||||
0x58 0x00000000 /* LED_CTRL2 */
|
||||
0x5c 0x0030c300 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6 STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
phy-handle = <&phy1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
};
|
||||
@ -82,3 +82,9 @@ $(Device/tplink)
|
||||
TPLINK_FLASHLAYOUT := 8Mlzma
|
||||
IMAGE_SIZE := 7936k
|
||||
endef
|
||||
|
||||
define Device/tplink-16mlzma
|
||||
$(Device/tplink)
|
||||
TPLINK_FLASHLAYOUT := 16Mlzma
|
||||
IMAGE_SIZE := 15872k
|
||||
endef
|
||||
|
||||
@ -1,5 +1,18 @@
|
||||
include ./common-tp-link.mk
|
||||
|
||||
define Device/tl-archer-c7-v2
|
||||
$(Device/tplink-16mlzma)
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := TP-LINK Archer C7 v2
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
|
||||
TPLINK_HWID := 0xc7000002
|
||||
SUPPORTED_DEVICES := tplink,tl-archer-c7-v2
|
||||
IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin
|
||||
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
|
||||
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
|
||||
endef
|
||||
TARGET_DEVICES += tl-archer-c7-v2
|
||||
|
||||
define Device/tl-wdr3600
|
||||
$(Device/tplink-8mlzma)
|
||||
ATH_SOC := ar9344
|
||||
|
||||
Loading…
Reference in New Issue
Block a user