mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-13 22:23:38 +00:00
ramips: mt76x8: add support for MERCUSYS MB130-4G v1
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Specification: SoC: MediaTek MT7628AN RAM: 128 MB, Zentel A3R1GE40JBF-8E Flash: 16MB, Winbond W25Q128JV Switch: rt3050-esw, 2 ports 100 Mbps WiFi: MediaTek mt7628-wmac 2.4GHz 802.11n and MediaTek MT7663 5GHz 802.11ac (PCIe) WWAN: Quectel EC200A-EL 4G modem (USB) GPIO: * 1 button (Reset/WPS) * 6 LEDs (Power+WPS, LAN, 3xSignal) * USB port power controls * Modem reset * Modem programming switch * Internal/external antenna switch for 4G Serial Interface: TP10 - 3.3V can be used for level shifter, if needed TP9 - TX TP8 - RX TP11 - GND Interface properties: 115200, 8N1 Access to console using serial port for OEM firmware: Username: admin Password: 1234 Flashing via TFTP (no disassembling or soldering required): 1. Connect your PC and router to port LAN 2. Configure PC interface using static IP 192.168.1.225, mask 255.255.255.0 3. Place OpenWRT firmware image (*-squashfs-tftp-recovery.bin) to TFTP root folder and renamed it to tp_recovery.bin 4. Unplug power from router 5. Press and hold Reset/WPS button 6. Power up the router 7. Wait until TFTP started uploading image (~10 seconds after power up) and release Reset/WPS button 8. Wait until image uploaded, i.e. until LAN LED start lighting 9. Enable DHCP address on PC interface and wait for assigning address 10. Use ssh (root@192.168.1.1) to configure router properties Depends on patch for firmware-utils package: https://github.com/openwrt/firmware-utils/commit/2051fe5b Signed-off-by: Sergii Shcherbakov <shchers@gmail.com> Link: https://github.com/openwrt/openwrt/pull/17819 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Sergii Shcherbakov
Hauke Mehrtens
parent
851ea69d8e
commit
b8eba75146
239
target/linux/ramips/dts/mt7628an_mercusys_mb130-4g-v1.dts
Normal file
239
target/linux/ramips/dts/mt7628an_mercusys_mb130-4g-v1.dts
Normal file
@ -0,0 +1,239 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "mercusys,mb130-4g-v1", "mediatek,mt7628an-soc";
|
||||
model = "MERCUSYS MB130-4G v1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wan {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal1 {
|
||||
label = "green:signal1";
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal2 {
|
||||
label = "green:signal2";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal3 {
|
||||
label = "green:signal3";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
out_atn {
|
||||
gpio-export,name = "out_atn";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_power {
|
||||
gpio-export,name = "usb_power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_boot {
|
||||
gpio-export,name = "usb_boot";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_reset {
|
||||
gpio-export,name = "usb_reset";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x20000 0xe90000>;
|
||||
};
|
||||
|
||||
partition@eb0000 {
|
||||
label = "ispconfig";
|
||||
reg = <0xeb0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ec0000 {
|
||||
label = "romfile";
|
||||
reg = <0xec0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_romfile_f100: macaddr@f100 {
|
||||
compatible = "mac-base";
|
||||
reg = <0xf100 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@ed0000 {
|
||||
label = "config";
|
||||
reg = <0xed0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ee0000 {
|
||||
label = "configbak";
|
||||
reg = <0xee0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ef0000 {
|
||||
label = "radio";
|
||||
reg = <0xef0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_radio_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
eeprom_radio_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x200>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
label = "userdata";
|
||||
reg = <0xf00000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "uart1", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
nvmem-cells = <&eeprom_radio_0>, <&macaddr_romfile_f100 0>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x37>;
|
||||
mediatek,portdisable = <0x33>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_romfile_f100 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_radio_8000>, <&macaddr_romfile_f100 (-1)>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
@ -488,6 +488,20 @@ define Device/mercury_mac1200r-v2
|
||||
endef
|
||||
TARGET_DEVICES += mercury_mac1200r-v2
|
||||
|
||||
define Device/mercusys_mb130-4g-v1
|
||||
$(Device/tplink-v2)
|
||||
IMAGE_SIZE := 14912k
|
||||
DEVICE_VENDOR := MERCUSYS
|
||||
DEVICE_MODEL := MB130-4G
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-mt7663-firmware-ap kmod-mt7615e \
|
||||
kmod-usb-serial-option kmod-usb-net-cdc-ether
|
||||
TPLINK_FLASHLAYOUT := 16MLmtk
|
||||
IMAGES := sysupgrade.bin tftp-recovery.bin
|
||||
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
|
||||
endef
|
||||
TARGET_DEVICES += mercusys_mb130-4g-v1
|
||||
|
||||
define Device/minew_g1-c
|
||||
IMAGE_SIZE := 15744k
|
||||
DEVICE_VENDOR := Minew
|
||||
|
||||
@ -96,6 +96,7 @@ tplink,archer-mr200-v6)
|
||||
ucidef_set_led_netdev "lan" "lan" "white:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "wan" "white:wan" "wwan0"
|
||||
;;
|
||||
mercusys,mb130-4g-v1|\
|
||||
tplink,re200-v2|\
|
||||
tplink,re200-v3|\
|
||||
tplink,re200-v4|\
|
||||
|
||||
@ -156,6 +156,11 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan" "6@eth0"
|
||||
;;
|
||||
mercusys,mb130-4g-v1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan" "3:lan" "6@eth0"
|
||||
ucidef_set_interface_wan "eth1"
|
||||
;;
|
||||
netgear,r6020|\
|
||||
netgear,r6080|\
|
||||
netgear,r6120|\
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user