mac80211: more wifi reconf related fixes

* uci state was not getting reset properly during teardown
* AP+STA co-exist state was not flushed properly upon channel switch
* remove a debug logger call
* properly teardown supplicant instances when they get disabled
* add md5 config support for supplicant
* don't call wpa_supplicant_prepare_interface twice

Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin 2020-04-28 16:10:26 +02:00
parent 0e522d5f4a
commit b5516603dd

View File

@ -590,7 +590,13 @@ mac80211_setup_supplicant() {
local add_sp=0
local spobj="$(ubus -S list | grep wpa_supplicant.${ifname})"
wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
[ "$enable" = 0 ] && {
ubus call wpa_supplicant.${phy} config_del "{\"iface\":\"$ifname\"}"
ip link set dev "$ifname" down
iw dev "$ifname" del
return 0
}
wpa_supplicant_prepare_interface "$ifname" nl80211 || {
iw dev "$ifname" del
return 1
@ -607,18 +613,17 @@ mac80211_setup_supplicant() {
[ "$spobj" ] && ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
add_sp=1
fi
[ "$enable" = 0 ] && {
ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
ip link set dev "$ifname" down
return 0
}
[ -z "$spobj" ] && add_sp=1
NEW_MD5_SP=$(test -e "${_config}" && md5sum ${_config})
OLD_MD5_SP=$(uci -q -P /var/state get wireless._${phy}.md5_${ifname})
if [ "$add_sp" = "1" ]; then
wpa_supplicant_run "$ifname" "$hostapd_ctrl"
else
ubus call $spobj reload
[ "${NEW_MD5_SP}" == "${OLD_MD5_SP}" ] || ubus call $spobj reload
fi
uci -q -P /var/state set wireless._${phy}.md5_${ifname}="${NEW_MD5_SP}"
return 0
}
mac80211_setup_supplicant_noctl() {
@ -765,7 +770,6 @@ mac80211_setup_vif() {
[ "$vif_enable" = 1 ] || action=down
if [ "$mode" != "ap" ] || [ "$ifname" = "$ap_ifname" ]; then
logger ip link set dev "$ifname" $action
ip link set dev "$ifname" "$action" || {
wireless_setup_vif_failed IFUP_ERROR
json_select ..
@ -923,8 +927,8 @@ drv_mac80211_setup() {
[ "$rxantenna" = "all" ] && rxantenna=0xffffffff
iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
iw phy "$phy" set antenna_gain $antenna_gain
iw phy "$phy" set distance "$distance"
iw phy "$phy" set antenna_gain $antenna_gain >/dev/null 2>&1
iw phy "$phy" set distance "$distance" >/dev/null 2>&1
if [ -n "$txpower" ]; then
iw phy "$phy" set txpower fixed "${txpower%%.*}00"
@ -954,8 +958,8 @@ drv_mac80211_setup() {
OLD_MD5=$(uci -q -P /var/state get wireless._${phy}.md5)
if [ "${NEWAPLIST}" != "${OLDAPLIST}" ]; then
mac80211_vap_cleanup hostapd "${OLDAPLIST}"
[ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap || return
fi
[ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
local add_ap=0
local primary_ap=${NEWAPLIST%% *}
[ -n "$hostapd_ctrl" ] && {
@ -966,7 +970,11 @@ drv_mac80211_setup() {
no_reload=$?
if [ "$no_reload" != "0" ]; then
mac80211_vap_cleanup hostapd "${OLDAPLIST}"
[ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap || return
mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
sleep 2
mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
fi
}
fi
@ -1031,12 +1039,10 @@ list_phy_interfaces() {
drv_mac80211_teardown() {
wireless_process_kill_all
json_select data
json_get_vars phy
json_select ..
for phy in `ls /sys/class/ieee80211/`; do
mac80211_interface_cleanup "$phy"
uci -q -P /var/state revert wireless._${phy}
done
}
add_driver mac80211