mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-18 16:40:29 +00:00
kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx
Hannu Nyman wrote in openwrt's github issue #9962: |Based on forum discussion, the commit 0bc794a |"kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash" |causes flash memory chip misdetection for some other |Fritzbox devices, as the commit only defines a 4-byte flash |memory chip ID that matches several chips used in the devices. | |See discussion from this onward |<https://forum.openwrt.org/t/openwrt-22-03-0-rc1-first-release-candidate/126045/182> | |OpenWrt 22.03.0-rc2 and rc3 are causing on a Fritzbox 7412 |bootloops due to a misdetected flash chip. | |Yup, that patch is missing the 5th ID byte entirely - both chips |share the same first 4; | | TC58NVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0x72 (digikey datasheet, page 35) | TC58BVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0xf2 (digikey datasheet, page 28) | |The commit has also been backported to openwrt-22.03 after rc1, |so both rc2 and rc3 suffer from this bug." Andreas' TC58NVG0S3H seems not to follow Toshibas/Kioxa's own datasheet. It only reports the first four bytes: "98 f1 80 15 00 00 00 00". This patch changes the id_len in the entry to 8. This makes it so that Andreas' NAND is still detected. At the same time, this prevents other Toshiba NAND flash chips - that share the same four bytes - from being misdetected. The issue has been reported upstream, since they also accepted the initial patch... so if not addressed, 5.19/5.20 will also break those affected devices again. Reported-by: Peter-vdL Fixes: 0bc794a66845 ("kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash") Link: <https://github.com/openwrt/openwrt/issues/9962> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
parent
156488d1d6
commit
b047ca1aa0
@ -13,6 +13,7 @@ has 128 bytes OOB. This adds a static NAND ID entry to correct this.
|
||||
Tested on FRITZ!Box 7530 flashed with OpenWrt.
|
||||
|
||||
Signed-off-by: Andreas Böhler <dev@aboehler.at>
|
||||
(changed id_len to 8)
|
||||
---
|
||||
drivers/mtd/nand/raw/nand_ids.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
@ -27,7 +28,7 @@ index 6e41902be35f..d64adbd1ce6b 100644
|
||||
SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
|
||||
+ {"TC58NVG0S3HTA00 1G 3.3V 8-bit",
|
||||
+ { .id = {0x98, 0xf1, 0x80, 0x15} },
|
||||
+ SZ_2K, SZ_128, SZ_128K, 0, 4, 128, NAND_ECC_INFO(8, SZ_512), },
|
||||
+ SZ_2K, SZ_128, SZ_128K, 0, 8, 128, NAND_ECC_INFO(8, SZ_512), },
|
||||
{"TC58NVG2S0F 4G 3.3V 8-bit",
|
||||
{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
|
||||
SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
|
||||
|
@ -13,6 +13,7 @@ has 128 bytes OOB. This adds a static NAND ID entry to correct this.
|
||||
Tested on FRITZ!Box 7530 flashed with OpenWrt.
|
||||
|
||||
Signed-off-by: Andreas Böhler <dev@aboehler.at>
|
||||
(changed id_len to 8)
|
||||
---
|
||||
drivers/mtd/nand/raw/nand_ids.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
@ -25,7 +26,7 @@ Signed-off-by: Andreas Böhler <dev@aboehler.at>
|
||||
SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
|
||||
+ {"TC58NVG0S3HTA00 1G 3.3V 8-bit",
|
||||
+ { .id = {0x98, 0xf1, 0x80, 0x15} },
|
||||
+ SZ_2K, SZ_128, SZ_128K, 0, 4, 128, NAND_ECC_INFO(8, SZ_512), },
|
||||
+ SZ_2K, SZ_128, SZ_128K, 0, 8, 128, NAND_ECC_INFO(8, SZ_512), },
|
||||
{"TC58NVG2S0F 4G 3.3V 8-bit",
|
||||
{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
|
||||
SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
|
||||
|
Loading…
x
Reference in New Issue
Block a user