Revert "ath79: elecom,wab: use nvmem"

This reverts commit 70e41d0205.

"ethaddr" is stored into the "u-boot-env" (stock: "Config") partition
and it's quoted with double-quotations, but that format is not supported
by the current NVMEM u-boot-env driver (and mac_pton() function) and the
MAC address won't be parsed to byte array.
This causes random MAC addresses on the adapters, so revert the above
commit.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17116
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
INAGAKI Hiroshi 2024-11-27 10:31:35 +09:00 committed by Robert Marko
parent 39b0f081ec
commit af611bce44
3 changed files with 17 additions and 13 deletions

View File

@ -8,7 +8,6 @@
/ {
aliases {
label-mac-device = &eth0;
led-boot = &led_status;
led-failsafe = &led_status;
led-upgrade = &led_status;
@ -108,9 +107,6 @@
phy-mode = "rgmii-rxid";
pll-data = <0xae000000 0x80000101 0x80001313>;
nvmem-cells = <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "mac-address";
gmac-config {
device = <&gmac>;
@ -148,8 +144,8 @@
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>;
nvmem-cell-names = "calibration", "mac-address";
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
};
};
@ -173,14 +169,9 @@
};
partition@40000 {
compatible = "u-boot,env";
label = "u-boot-env";
reg = <0x40000 0x10000>;
read-only;
macaddr_uboot_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
partition@50000 {
@ -261,6 +252,6 @@
&wmac {
status = "okay";
nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "calibration", "mac-address";
nvmem-cells = <&cal_art_1000>;
nvmem-cell-names = "calibration";
};

View File

@ -717,6 +717,9 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
elecom,wab-i1750-ps|\
elecom,wab-s1167-ps|\
elecom,wab-s600-ps|\
engenius,ecb1200|\
engenius,ecb1750)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)

View File

@ -42,6 +42,16 @@ case "$board" in
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
elecom,wab-i1750-ps|\
elecom,wab-s1167-ps|\
elecom,wab-s600-ps)
# set the 5G MAC address (= ethaddr + 1)
[ "$PHYNBR" -eq 0 ] && \
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
# set the 2.4G MAC address (= ethaddr)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii u-boot-env "ethaddr" > /sys${DEVPATH}/macaddress
;;
engenius,ecb1200|\
engenius,ecb1750)
[ "$PHYNBR" -eq 0 ] && \