kernel: remove linux 4.0 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47412
This commit is contained in:
Felix Fietkau 2015-11-07 16:22:08 +00:00
parent 86a46a817b
commit ad133b57a9
211 changed files with 0 additions and 33364 deletions

File diff suppressed because it is too large Load Diff

View File

@ -1,25 +0,0 @@
Upstream changed the default rootfs to tmpfs when none has been passed
to the kernel - this doesn't fit our purposes, so change it back.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -625,6 +625,7 @@ int __init init_rootfs(void)
if (err)
return err;
+#if 0
if (IS_ENABLED(CONFIG_TMPFS) && !saved_root_name[0] &&
(!root_fs_names || strstr(root_fs_names, "tmpfs"))) {
err = shmem_init();
@@ -632,6 +633,9 @@ int __init init_rootfs(void)
} else {
err = init_ramfs_fs();
}
+#else
+ err = init_ramfs_fs();
+#endif
if (err)
unregister_filesystem(&rootfs_fs_type);

View File

@ -1,30 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -357,6 +357,16 @@ static void ssb_pcicore_init_hostmode(st
pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
+ /*
+ * Accessing PCI config without a proper delay after devices reset (not
+ * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704).
+ * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
+ * completely. Flushing all writes was also tested but with no luck.
+ * The same problem was reported for WRT350N v1 (BCM4705), so we just
+ * sleep here unconditionally.
+ */
+ usleep_range(1000, 2000);
+
/* Enable PCI bridge BAR0 prefetch and burst */
val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1135,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
+ case SSB_IDLOW_SSBREV:
+ break;
default:
WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
}

View File

@ -1,680 +0,0 @@
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -26,6 +26,7 @@ bool bcma_wait_value(struct bcma_device
int timeout);
void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
void bcma_init_bus(struct bcma_bus *bus);
+void bcma_unregister_cores(struct bcma_bus *bus);
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus);
@@ -42,6 +43,9 @@ int bcma_bus_scan(struct bcma_bus *bus);
int bcma_sprom_get(struct bcma_bus *bus);
/* driver_chipcommon.c */
+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
extern struct platform_device bcma_pflash_dev;
@@ -52,6 +56,8 @@ int bcma_core_chipcommon_b_init(struct b
void bcma_core_chipcommon_b_free(struct bcma_drv_cc_b *ccb);
/* driver_chipcommon_pmu.c */
+void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+void bcma_pmu_init(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
@@ -100,7 +106,35 @@ static inline void __exit bcma_host_soc_
#endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
/* driver_pci.c */
+#ifdef CONFIG_BCMA_DRIVER_PCI
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_init(struct bcma_drv_pci *pc);
+void bcma_core_pci_up(struct bcma_drv_pci *pc);
+void bcma_core_pci_down(struct bcma_drv_pci *pc);
+#else
+static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
+{
+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+static inline void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+ /* Initialization is required for PCI hosted bus */
+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+#endif
+
+/* driver_pcie2.c */
+#ifdef CONFIG_BCMA_DRIVER_PCI
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
+#else
+static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
+{
+ /* Initialization is required for PCI hosted bus */
+ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
+}
+#endif
extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
@@ -117,6 +151,39 @@ static inline void bcma_core_pci_hostmod
}
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+/**************************************************
+ * driver_mips.c
+ **************************************************/
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+{
+ return 0;
+}
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+}
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+{
+}
+#endif
+
+/**************************************************
+ * driver_gmac_cmn.c
+ **************************************************/
+
+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
+void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
+#else
+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
+{
+}
+#endif
+
#ifdef CONFIG_BCMA_DRIVER_GPIO
/* driver_gpio.c */
int bcma_gpio_init(struct bcma_drv_cc *cc);
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -17,6 +17,8 @@
#include "bcma_private.h"
+#define BCMA_GPIO_MAX_PINS 32
+
static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
{
return container_of(chip, struct bcma_drv_cc, gpio);
@@ -76,7 +78,7 @@ static void bcma_gpio_free(struct gpio_c
bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
}
-#if IS_BUILTIN(CONFIG_BCM47XX)
+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
@@ -204,6 +206,7 @@ static void bcma_gpio_irq_domain_exit(st
int bcma_gpio_init(struct bcma_drv_cc *cc)
{
+ struct bcma_bus *bus = cc->core->bus;
struct gpio_chip *chip = &cc->gpio;
int err;
@@ -215,14 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
-#if IS_BUILTIN(CONFIG_BCM47XX)
+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
chip->to_irq = bcma_gpio_to_irq;
#endif
#if IS_BUILTIN(CONFIG_OF)
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
chip->of_node = cc->core->dev.of_node;
#endif
- switch (cc->core->bus->chipinfo.id) {
+ switch (bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM53572:
chip->ngpio = 32;
@@ -231,13 +234,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->ngpio = 16;
}
- /* There is just one SoC in one device and its GPIO addresses should be
- * deterministic to address them more easily. The other buses could get
- * a random base number. */
- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
- chip->base = 0;
- else
- chip->base = -1;
+ /*
+ * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
+ * pin numbers. We don't have Device Tree there and we can't really use
+ * relative (per chip) numbers.
+ * So let's use predictable base for BCM47XX and "random" for all other.
+ */
+#if IS_BUILTIN(CONFIG_BCM47XX)
+ chip->base = bus->num * BCMA_GPIO_MAX_PINS;
+#else
+ chip->base = -1;
+#endif
err = bcma_gpio_irq_domain_init(cc);
if (err)
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
}
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
- bool enable)
-{
- struct pci_dev *pdev;
- u32 coremask, tmp;
- int err = 0;
-
- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
- /* This bcma device is not on a PCI host-bus. So the IRQs are
- * not routed through the PCI core.
- * So we must not enable routing through the PCI core. */
- goto out;
- }
-
- pdev = pc->core->bus->host_pci;
-
- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
- if (err)
- goto out;
-
- coremask = BIT(core->core_index) << 8;
- if (enable)
- tmp |= coremask;
- else
- tmp &= ~coremask;
-
- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
-
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
{
u32 w;
@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer
bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
}
-void bcma_core_pci_up(struct bcma_bus *bus)
+void bcma_core_pci_up(struct bcma_drv_pci *pc)
{
- struct bcma_drv_pci *pc;
-
- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
- return;
-
- pc = &bus->drv_pci[0];
-
bcma_core_pci_extend_L1timer(pc, true);
}
-EXPORT_SYMBOL_GPL(bcma_core_pci_up);
-void bcma_core_pci_down(struct bcma_bus *bus)
+void bcma_core_pci_down(struct bcma_drv_pci *pc)
{
- struct bcma_drv_pci *pc;
-
- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
- return;
-
- pc = &bus->drv_pci[0];
-
bcma_core_pci_extend_L1timer(pc, false);
}
-EXPORT_SYMBOL_GPL(bcma_core_pci_down);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -11,6 +11,7 @@
#include "bcma_private.h"
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
#include <asm/paccess.h>
--- a/drivers/bcma/driver_pcie2.c
+++ b/drivers/bcma/driver_pcie2.c
@@ -10,6 +10,7 @@
#include "bcma_private.h"
#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
/**************************************************
* R/W ops.
@@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st
void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
{
- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct bcma_chipinfo *ci = &bus->chipinfo;
u32 tmp;
tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
if ((tmp & 0xe) >> 1 == 2)
bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
- /* TODO: Do we need pcie_reqsize? */
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4360:
+ case BCMA_CHIP_ID_BCM4352:
+ pcie2->reqsize = 1024;
+ break;
+ default:
+ pcie2->reqsize = 128;
+ break;
+ }
if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
@@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr
pciedev_crwlpciegen2_180(pcie2);
pciedev_crwlpciegen2_182(pcie2);
}
+
+/**************************************************
+ * Runtime ops.
+ **************************************************/
+
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2)
+{
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct pci_dev *dev = bus->host_pci;
+ int err;
+
+ err = pcie_set_readrq(dev, pcie2->reqsize);
+ if (err)
+ bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err);
+}
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc
/* Initialize struct, detect chip */
bcma_init_bus(bus);
+ /* Scan bus to find out generation of PCIe core */
+ err = bcma_bus_scan(bus);
+ if (err)
+ goto err_pci_unmap_mmio;
+
+ if (bcma_find_core(bus, BCMA_CORE_PCIE2))
+ bus->host_is_pcie2 = true;
+
/* Register */
err = bcma_bus_register(bus);
if (err)
- goto err_pci_unmap_mmio;
+ goto err_unregister_cores;
pci_set_drvdata(dev, bus);
out:
return err;
+err_unregister_cores:
+ bcma_unregister_cores(bus);
err_pci_unmap_mmio:
pci_iounmap(dev, bus->mmio);
err_pci_release_regions:
@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
{
pci_unregister_driver(&bcma_pci_bridge_driver);
}
+
+/**************************************************
+ * Runtime ops for drivers.
+ **************************************************/
+
+/* See also pcicore_up */
+void bcma_host_pci_up(struct bcma_bus *bus)
+{
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ if (bus->host_is_pcie2)
+ bcma_core_pcie2_up(&bus->drv_pcie2);
+ else
+ bcma_core_pci_up(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_up);
+
+/* See also pcicore_down */
+void bcma_host_pci_down(struct bcma_bus *bus)
+{
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ if (!bus->host_is_pcie2)
+ bcma_core_pci_down(&bus->drv_pci[0]);
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
+
+/* See also si_pci_setup */
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
+ bool enable)
+{
+ struct pci_dev *pdev;
+ u32 coremask, tmp;
+ int err = 0;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
+
+ pdev = bus->host_pci;
+
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+
+ coremask = BIT(core->core_index) << 8;
+ if (enable)
+ tmp |= coremask;
+ else
+ tmp &= ~coremask;
+
+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
+
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -363,7 +363,7 @@ static int bcma_register_devices(struct
return 0;
}
-static void bcma_unregister_cores(struct bcma_bus *bus)
+void bcma_unregister_cores(struct bcma_bus *bus)
{
struct bcma_device *core, *tmp;
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4819,7 +4819,7 @@ static void b43_wireless_core_exit(struc
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
- bcma_core_pci_down(dev->dev->bdev->bus);
+ bcma_host_pci_down(dev->dev->bdev->bus);
break;
#endif
#ifdef CONFIG_B43_SSB
@@ -4866,9 +4866,9 @@ static int b43_wireless_core_init(struct
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
dev->dev->bdev, true);
- bcma_core_pci_up(dev->dev->bdev->bus);
+ bcma_host_pci_up(dev->dev->bdev->bus);
break;
#endif
#ifdef CONFIG_B43_SSB
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4668,7 +4668,7 @@ static int brcms_b_attach(struct brcms_c
brcms_c_coredisable(wlc_hw);
/* Match driver "down" state */
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
/* turn off pll and xtal to match driver "down" state */
brcms_b_xtal(wlc_hw, OFF);
@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
* Configure pci/pcmcia here instead of in brcms_c_attach()
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
*/
- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
true);
/*
@@ -4969,12 +4969,12 @@ static int brcms_b_up_prep(struct brcms_
*/
if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
/* put SB PCI in down state again */
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
return -ENOMEDIUM;
}
- bcma_core_pci_up(wlc_hw->d11core->bus);
+ bcma_host_pci_up(wlc_hw->d11core->bus);
/* reset the d11 core */
brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
@@ -5171,7 +5171,7 @@ static int brcms_b_down_finish(struct br
/* turn off primary xtal and pll */
if (!wlc_hw->noreset) {
- bcma_core_pci_down(wlc_hw->d11core->bus);
+ bcma_host_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
}
}
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -434,6 +434,27 @@ static inline struct bcma_device *bcma_f
return bcma_find_core_unit(bus, coreid, 0);
}
+#ifdef CONFIG_BCMA_HOST_PCI
+extern void bcma_host_pci_up(struct bcma_bus *bus);
+extern void bcma_host_pci_down(struct bcma_bus *bus);
+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
+ struct bcma_device *core, bool enable);
+#else
+static inline void bcma_host_pci_up(struct bcma_bus *bus)
+{
+}
+static inline void bcma_host_pci_down(struct bcma_bus *bus)
+{
+}
+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
+ struct bcma_device *core, bool enable)
+{
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+ return -ENOTSUPP;
+ return 0;
+}
+#endif
+
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -238,13 +238,13 @@ struct bcma_drv_pci {
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
-extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
- struct bcma_device *core, bool enable);
-extern void bcma_core_pci_up(struct bcma_bus *bus);
-extern void bcma_core_pci_down(struct bcma_bus *bus);
+#ifdef CONFIG_BCMA_DRIVER_PCI
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
+#else
+static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
+{
+}
+#endif
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
--- a/include/linux/bcma/bcma_driver_pcie2.h
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -143,6 +143,8 @@
struct bcma_drv_pcie2 {
struct bcma_device *core;
+
+ u16 reqsize;
};
#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset)
@@ -153,6 +155,4 @@ struct bcma_drv_pcie2 {
#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set)
#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask)
-void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
-
#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
depends on BCMA_HOST_PCI_POSSIBLE
+ select BCMA_DRIVER_PCI
default y
config BCMA_DRIVER_PCI_HOSTMODE
@@ -44,6 +45,22 @@ config BCMA_HOST_SOC
If unsure, say N
+config BCMA_DRIVER_PCI
+ bool "BCMA Broadcom PCI core driver"
+ depends on BCMA && PCI
+ default y
+ help
+ BCMA bus may have many versions of PCIe core. This driver
+ supports:
+ 1) PCIe core working in clientmode
+ 2) PCIe Gen 2 clientmode core
+
+ In general PCIe (Gen 2) clientmode core is required on PCIe
+ hosted buses. It's responsible for initialization and basic
+ hardware management.
+ This driver is also prerequisite for a hostmode PCIe core
+ support.
+
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
depends on BCMA && MIPS
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -3,8 +3,8 @@ bcma-y += driver_chipcommon.o driver
bcma-y += driver_chipcommon_b.o
bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
-bcma-y += driver_pci.o
-bcma-y += driver_pcie2.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pcie2.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -663,14 +663,6 @@ struct bcma_drv_cc_b {
#define bcma_cc_maskset32(cc, offset, mask, set) \
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
-
-extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
-extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
-
-void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
-
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
@@ -690,9 +682,6 @@ u32 bcma_chipco_gpio_pullup(struct bcma_
u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
/* PMU support */
-extern void bcma_pmu_init(struct bcma_drv_cc *cc);
-extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
-
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
--- a/include/linux/bcma/bcma_driver_gmac_cmn.h
+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
@@ -91,10 +91,4 @@ struct bcma_drv_gmac_cmn {
#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val)
#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val)
-#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
-extern void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
-#else
-static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
-#endif
-
#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -39,21 +39,6 @@ struct bcma_drv_mips {
u8 early_setup_done:1;
};
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
-extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-
-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
-#else
-static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
-static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
-
-static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-{
- return 0;
-}
-#endif
-
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */

View File

@ -1,32 +0,0 @@
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -29,10 +29,13 @@ struct ssb_sprom {
u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */
u8 et0phyaddr; /* MII address for enet0 */
u8 et1phyaddr; /* MII address for enet1 */
+ u8 et2phyaddr; /* MII address for enet2 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
+ u8 et2mdcport; /* MDIO for enet2 */
u16 dev_id; /* Device ID overriding e.g. PCI ID */
u16 board_rev; /* Board revision number from SPROM. */
u16 board_num; /* Board number from SPROM. */
@@ -88,11 +91,14 @@ struct ssb_sprom {
u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
+ u32 boardflags;
+ u32 boardflags2;
+ u32 boardflags3;
+ /* TODO: Switch all drivers to new u32 fields and drop below ones */
u16 boardflags_lo; /* Board flags (bits 0-15) */
u16 boardflags_hi; /* Board flags (bits 16-31) */
u16 boardflags2_lo; /* Board flags (bits 32-47) */
u16 boardflags2_hi; /* Board flags (bits 48-63) */
- /* TODO store board flags in a single u64 */
struct ssb_sprom_core_pwr_info core_pwr_info[4];

View File

@ -1,86 +0,0 @@
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -226,6 +226,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->of_node = cc->core->dev.of_node;
#endif
switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4707:
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM53572:
chip->ngpio = 32;
@@ -235,16 +236,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c
}
/*
- * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
- * pin numbers. We don't have Device Tree there and we can't really use
- * relative (per chip) numbers.
- * So let's use predictable base for BCM47XX and "random" for all other.
+ * Register SoC GPIO devices with absolute GPIO pin base.
+ * On MIPS, we don't have Device Tree and we can't use relative (per chip)
+ * GPIO numbers.
+ * On some ARM devices, user space may want to access some system GPIO
+ * pins directly, which is easier to do with a predictable GPIO base.
*/
-#if IS_BUILTIN(CONFIG_BCM47XX)
- chip->base = bus->num * BCMA_GPIO_MAX_PINS;
-#else
- chip->base = -1;
-#endif
+ if (IS_BUILTIN(CONFIG_BCM47XX) ||
+ cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+ chip->base = bus->num * BCMA_GPIO_MAX_PINS;
+ else
+ chip->base = -1;
err = bcma_gpio_irq_domain_init(cc);
if (err)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -29,12 +29,6 @@ config BCMA_HOST_PCI
select BCMA_DRIVER_PCI
default y
-config BCMA_DRIVER_PCI_HOSTMODE
- bool "Driver for PCI core working in hostmode"
- depends on BCMA && MIPS && BCMA_HOST_PCI
- help
- PCI core hostmode operation (external PCI bus).
-
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on BCMA
@@ -61,6 +55,12 @@ config BCMA_DRIVER_PCI
This driver is also prerequisite for a hostmode PCIe core
support.
+config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
+ depends on BCMA && MIPS && BCMA_DRIVER_PCI
+ help
+ PCI core hostmode operation (external PCI bus).
+
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
depends on BCMA && MIPS
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -246,7 +246,18 @@ static inline void bcma_core_pci_power_s
}
#endif
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
+#else
+static inline int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev)
+{
+ return -ENOTSUPP;
+}
+static inline int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
+{
+ return -ENOTSUPP;
+}
+#endif
#endif /* LINUX_BCMA_DRIVER_PCI_H_ */

View File

@ -1,509 +0,0 @@
Subject: netfilter: conntrack: cache route for forwarded connections
... to avoid per-packet FIB lookup if possible.
The cached dst is re-used provided the input interface
is the same as that of the previous packet in the same direction.
If not, the cached dst is invalidated.
For ipv6 we also need to store sernum, else dst_check doesn't work,
pointed out by Eric Dumazet.
This should speed up forwarding when conntrack is already in use
anyway, especially when using reverse path filtering -- active RPF
enforces two FIB lookups for each packet.
Before the routing cache removal this didn't matter since RPF was performed
only when route cache didn't yield a result; but without route cache it
comes at higher price.
Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
avoid holding on to dsts of 'frozen' conntracks.
Signed-off-by: Florian Westphal <fw@strlen.de>
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -30,6 +30,9 @@ enum nf_ct_ext_id {
#if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
NF_CT_EXT_SYNPROXY,
#endif
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
+ NF_CT_EXT_RTCACHE,
+#endif
NF_CT_EXT_NUM,
};
@@ -43,6 +46,7 @@ enum nf_ct_ext_id {
#define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
#define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
#define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
/* Extensions: optional stuff which isn't permanently in struct. */
struct nf_ct_ext {
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_rtcache.h
@@ -0,0 +1,34 @@
+#include <linux/gfp.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct dst_entry;
+
+struct nf_conn_dst_cache {
+ struct dst_entry *dst;
+ int iif;
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
+ u32 cookie;
+#endif
+
+};
+
+struct nf_conn_rtcache {
+ struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
+};
+
+static inline
+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
+{
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
+ return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
+#else
+ return NULL;
+#endif
+}
+
+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
+ enum ip_conntrack_dir dir)
+{
+ return rtc->cached_dst[dir].iif;
+}
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -106,6 +106,18 @@ config NF_CONNTRACK_EVENTS
If unsure, say `N'.
+config NF_CONNTRACK_RTCACHE
+ tristate "Cache route entries in conntrack objects"
+ depends on NETFILTER_ADVANCED
+ depends on NF_CONNTRACK
+ help
+ If this option is enabled, the connection tracking code will
+ cache routing information for each connection that is being
+ forwarded, at a cost of 32 bytes per conntrack object.
+
+ To compile it as a module, choose M here. If unsure, say N.
+ The module will be called nf_conntrack_rtcache.
+
config NF_CONNTRACK_TIMEOUT
bool 'Connection tracking timeout'
depends on NETFILTER_ADVANCED
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_LOG) += n
# connection tracking
obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
+# optional conntrack route cache extension
+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
+
# SCTP protocol connection tracking
obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o
obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
--- /dev/null
+++ b/net/netfilter/nf_conntrack_rtcache.c
@@ -0,0 +1,391 @@
+/* route cache for netfilter.
+ *
+ * (C) 2014 Red Hat GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/netfilter.h>
+#include <linux/skbuff.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/export.h>
+#include <linux/module.h>
+
+#include <net/dst.h>
+
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+#include <net/netfilter/nf_conntrack_rtcache.h>
+
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
+#include <net/ip6_fib.h>
+#endif
+
+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
+ enum ip_conntrack_dir dir)
+{
+ struct dst_entry *dst = rtc->cached_dst[dir].dst;
+
+ dst_release(dst);
+}
+
+static void nf_conn_rtcache_destroy(struct nf_conn *ct)
+{
+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
+
+ if (!rtc)
+ return;
+
+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
+}
+
+static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
+{
+ struct nf_conn_rtcache *rtc;
+
+ rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
+ if (rtc) {
+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
+ rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
+ rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
+ }
+}
+
+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
+{
+ if (nf_ct_is_untracked(ct))
+ return NULL;
+ return nf_ct_rtcache_find(ct);
+}
+
+static struct dst_entry *
+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
+ enum ip_conntrack_dir dir)
+{
+ return rtc->cached_dst[dir].dst;
+}
+
+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
+{
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
+ if (pf == NFPROTO_IPV6) {
+ const struct rt6_info *rt = (const struct rt6_info *)dst;
+
+ if (rt->rt6i_node)
+ return (u32)rt->rt6i_node->fn_sernum;
+ }
+#endif
+ return 0;
+}
+
+static void nf_conn_rtcache_dst_set(int pf,
+ struct nf_conn_rtcache *rtc,
+ struct dst_entry *dst,
+ enum ip_conntrack_dir dir, int iif)
+{
+ if (rtc->cached_dst[dir].iif != iif)
+ rtc->cached_dst[dir].iif = iif;
+
+ if (rtc->cached_dst[dir].dst != dst) {
+ struct dst_entry *old;
+
+ dst_hold(dst);
+
+ old = xchg(&rtc->cached_dst[dir].dst, dst);
+ dst_release(old);
+
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
+ if (pf == NFPROTO_IPV6)
+ rtc->cached_dst[dir].cookie =
+ nf_rtcache_get_cookie(pf, dst);
+#endif
+ }
+}
+
+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
+ enum ip_conntrack_dir dir)
+{
+ struct dst_entry *old;
+
+ pr_debug("Invalidate iif %d for dir %d on cache %p\n",
+ rtc->cached_dst[dir].iif, dir, rtc);
+
+ old = xchg(&rtc->cached_dst[dir].dst, NULL);
+ dst_release(old);
+ rtc->cached_dst[dir].iif = -1;
+}
+
+static unsigned int nf_rtcache_in(const struct nf_hook_ops *ops,
+ struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ int (*okfn)(struct sk_buff *))
+{
+ struct nf_conn_rtcache *rtc;
+ enum ip_conntrack_info ctinfo;
+ enum ip_conntrack_dir dir;
+ struct dst_entry *dst;
+ struct nf_conn *ct;
+ int iif;
+ u32 cookie;
+
+ if (skb_dst(skb) || skb->sk)
+ return NF_ACCEPT;
+
+ ct = nf_ct_get(skb, &ctinfo);
+ if (!ct)
+ return NF_ACCEPT;
+
+ rtc = nf_ct_rtcache_find_usable(ct);
+ if (!rtc)
+ return NF_ACCEPT;
+
+ /* if iif changes, don't use cache and let ip stack
+ * do route lookup.
+ *
+ * If rp_filter is enabled it might toss skb, so
+ * we don't want to avoid these checks.
+ */
+ dir = CTINFO2DIR(ctinfo);
+ iif = nf_conn_rtcache_iif_get(rtc, dir);
+ if (in->ifindex != iif) {
+ pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
+ ct, iif, in->ifindex);
+ return NF_ACCEPT;
+ }
+ dst = nf_conn_rtcache_dst_get(rtc, dir);
+ if (dst == NULL)
+ return NF_ACCEPT;
+
+ cookie = nf_rtcache_get_cookie(ops->pf, dst);
+
+ dst = dst_check(dst, cookie);
+ pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
+ if (likely(dst))
+ skb_dst_set_noref(skb, dst);
+ else
+ nf_conn_rtcache_dst_obsolete(rtc, dir);
+
+ return NF_ACCEPT;
+}
+
+static unsigned int nf_rtcache_forward(const struct nf_hook_ops *ops,
+ struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ int (*okfn)(struct sk_buff *))
+{
+ struct nf_conn_rtcache *rtc;
+ enum ip_conntrack_info ctinfo;
+ enum ip_conntrack_dir dir;
+ struct nf_conn *ct;
+ struct dst_entry *dst = skb_dst(skb);
+ int iif;
+
+ ct = nf_ct_get(skb, &ctinfo);
+ if (!ct)
+ return NF_ACCEPT;
+
+ if (dst && dst_xfrm(dst))
+ return NF_ACCEPT;
+
+ if (!nf_ct_is_confirmed(ct)) {
+ if (WARN_ON(nf_ct_rtcache_find(ct)))
+ return NF_ACCEPT;
+ nf_ct_rtcache_ext_add(ct);
+ return NF_ACCEPT;
+ }
+
+ rtc = nf_ct_rtcache_find_usable(ct);
+ if (!rtc)
+ return NF_ACCEPT;
+
+ dir = CTINFO2DIR(ctinfo);
+ iif = nf_conn_rtcache_iif_get(rtc, dir);
+ pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
+ ct, skb, dir, iif, in->ifindex);
+ if (likely(in->ifindex == iif))
+ return NF_ACCEPT;
+
+ nf_conn_rtcache_dst_set(ops->pf, rtc, skb_dst(skb), dir, in->ifindex);
+ return NF_ACCEPT;
+}
+
+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
+{
+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
+ struct net_device *dev = data;
+
+ if (!rtc)
+ return 0;
+
+ if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
+ dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
+ }
+
+ return 0;
+}
+
+static int nf_rtcache_netdev_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+ struct net *net = dev_net(dev);
+
+ if (event == NETDEV_DOWN)
+ nf_ct_iterate_cleanup(net, nf_rtcache_dst_remove, dev, 0, 0);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block nf_rtcache_notifier = {
+ .notifier_call = nf_rtcache_netdev_event,
+};
+
+static struct nf_hook_ops rtcache_ops[] = {
+ {
+ .hook = nf_rtcache_in,
+ .owner = THIS_MODULE,
+ .pf = NFPROTO_IPV4,
+ .hooknum = NF_INET_PRE_ROUTING,
+ .priority = NF_IP_PRI_LAST,
+ },
+ {
+ .hook = nf_rtcache_forward,
+ .owner = THIS_MODULE,
+ .pf = NFPROTO_IPV4,
+ .hooknum = NF_INET_FORWARD,
+ .priority = NF_IP_PRI_LAST,
+ },
+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
+ {
+ .hook = nf_rtcache_in,
+ .owner = THIS_MODULE,
+ .pf = NFPROTO_IPV6,
+ .hooknum = NF_INET_PRE_ROUTING,
+ .priority = NF_IP_PRI_LAST,
+ },
+ {
+ .hook = nf_rtcache_forward,
+ .owner = THIS_MODULE,
+ .pf = NFPROTO_IPV6,
+ .hooknum = NF_INET_FORWARD,
+ .priority = NF_IP_PRI_LAST,
+ },
+#endif
+};
+
+static struct nf_ct_ext_type rtcache_extend __read_mostly = {
+ .len = sizeof(struct nf_conn_rtcache),
+ .align = __alignof__(struct nf_conn_rtcache),
+ .id = NF_CT_EXT_RTCACHE,
+ .destroy = nf_conn_rtcache_destroy,
+};
+
+static int __init nf_conntrack_rtcache_init(void)
+{
+ int ret = nf_ct_extend_register(&rtcache_extend);
+
+ if (ret < 0) {
+ pr_err("nf_conntrack_rtcache: Unable to register extension\n");
+ return ret;
+ }
+
+ ret = nf_register_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
+ if (ret < 0) {
+ nf_ct_extend_unregister(&rtcache_extend);
+ return ret;
+ }
+
+ ret = register_netdevice_notifier(&nf_rtcache_notifier);
+ if (ret) {
+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
+ nf_ct_extend_unregister(&rtcache_extend);
+ }
+
+ return ret;
+}
+
+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
+{
+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
+
+ return rtc != NULL;
+}
+
+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
+{
+ bool wait = false;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct nf_conntrack_tuple_hash *h;
+ struct hlist_nulls_node *n;
+ struct nf_conn *ct;
+ struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
+
+ rcu_read_lock();
+ spin_lock_bh(&pcpu->lock);
+
+ hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
+ ct = nf_ct_tuplehash_to_ctrack(h);
+ if (nf_ct_rtcache_find(ct) != NULL) {
+ wait = true;
+ break;
+ }
+ }
+ spin_unlock_bh(&pcpu->lock);
+ rcu_read_unlock();
+ }
+
+ return wait;
+}
+
+static void __exit nf_conntrack_rtcache_fini(void)
+{
+ struct net *net;
+ int count = 0;
+
+ /* remove hooks so no new connections get rtcache extension */
+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
+
+ synchronize_net();
+
+ unregister_netdevice_notifier(&nf_rtcache_notifier);
+
+ rtnl_lock();
+
+ /* zap all conntracks with rtcache extension */
+ for_each_net(net)
+ nf_ct_iterate_cleanup(net, nf_rtcache_ext_remove, NULL, 0, 0);
+
+ for_each_net(net) {
+ /* .. and make sure they're gone from dying list, too */
+ while (nf_conntrack_rtcache_wait_for_dying(net)) {
+ msleep(200);
+ WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
+ }
+ }
+
+ rtnl_unlock();
+ synchronize_net();
+ nf_ct_extend_unregister(&rtcache_extend);
+}
+module_init(nf_conntrack_rtcache_init);
+module_exit(nf_conntrack_rtcache_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
+MODULE_DESCRIPTION("Conntrack route cache extension");

View File

@ -1,22 +0,0 @@
--- a/arch/mips/boot/compressed/string.c
+++ b/arch/mips/boot/compressed/string.c
@@ -26,3 +26,19 @@ void *memset(void *s, int c, size_t n)
ss[i] = c;
return s;
}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+ unsigned char *d = __dest;
+ const unsigned char *s = __src;
+
+ if (__dest == __src)
+ return __dest;
+
+ if (__dest < __src)
+ return memcpy(__dest, __src, count);
+
+ while (count--)
+ d[count] = s[count];
+ return __dest;
+}

View File

@ -1,76 +0,0 @@
From c25b23b8a387e7d31f7a74af8e37b61e9e6ebb21 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Mar 2015 23:14:31 +0100
Subject: [PATCH] bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On ARM SoCs with bgmac Ethernet hardware we don't have any normal PHY.
There is always a switch attached but it's not even controlled over MDIO
like in case of MIPS devices.
We need a fixed PHY to be able to send/receive packets from the switch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bgmac.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -14,6 +14,7 @@
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <bcm47xx_nvram.h>
@@ -1330,13 +1331,46 @@ static void bgmac_adjust_link(struct net
}
}
+static int bgmac_fixed_phy_register(struct bgmac *bgmac)
+{
+ struct fixed_phy_status fphy_status = {
+ .link = 1,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ };
+ struct phy_device *phy_dev;
+ int err;
+
+ phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
+ if (!phy_dev || IS_ERR(phy_dev)) {
+ bgmac_err(bgmac, "Failed to register fixed PHY device\n");
+ return -ENODEV;
+ }
+
+ err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+ if (err) {
+ bgmac_err(bgmac, "Connecting PHY failed\n");
+ return err;
+ }
+
+ bgmac->phy_dev = phy_dev;
+
+ return err;
+}
+
static int bgmac_mii_register(struct bgmac *bgmac)
{
+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
struct mii_bus *mii_bus;
struct phy_device *phy_dev;
char bus_id[MII_BUS_ID_SIZE + 3];
int i, err = 0;
+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+ ci->id == BCMA_CHIP_ID_BCM53018)
+ return bgmac_fixed_phy_register(bgmac);
+
mii_bus = mdiobus_alloc();
if (!mii_bus)
return -ENOMEM;

View File

@ -1,28 +0,0 @@
From fc300dc3733fdc328e6e10c7b8379b60c26cd648 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Mar 2015 23:14:32 +0100
Subject: [PATCH] bgmac: allow enabling on ARCH_BCM_5301X
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Home routers based on ARM SoCs like BCM4708 also have bcma bus with core
supported by bgmac.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -142,7 +142,7 @@ config BNX2X_SRIOV
config BGMAC
tristate "BCMA bus GBit core support"
- depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
+ depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X)
select PHYLIB
---help---
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.

View File

@ -1,24 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 23 Mar 2015 02:40:06 +0100
Subject: [PATCH] bgmac: fix descriptor frame start/end definitions
The start-of-frame and end-of-frame bits were accidentally swapped.
In the current code it does not make any difference, since they are
always used together.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -345,8 +345,8 @@
#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */
#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
-#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */
-#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */
+#define BGMAC_DESC_CTL0_EOF 0x40000000 /* End of frame */
+#define BGMAC_DESC_CTL0_SOF 0x80000000 /* Start of frame */
#define BGMAC_DESC_CTL1_LEN 0x00001FFF
#define BGMAC_PHY_NOREGS 0x1E

View File

@ -1,189 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 23 Mar 2015 02:41:25 +0100
Subject: [PATCH] bgmac: implement GRO and use build_skb
This improves performance for routing and local rx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -276,31 +276,31 @@ static int bgmac_dma_rx_skb_for_slot(str
struct bgmac_slot_info *slot)
{
struct device *dma_dev = bgmac->core->dma_dev;
- struct sk_buff *skb;
dma_addr_t dma_addr;
struct bgmac_rx_header *rx;
+ void *buf;
/* Alloc skb */
- skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
- if (!skb)
+ buf = netdev_alloc_frag(BGMAC_RX_ALLOC_SIZE);
+ if (!buf)
return -ENOMEM;
/* Poison - if everything goes fine, hardware will overwrite it */
- rx = (struct bgmac_rx_header *)skb->data;
+ rx = buf;
rx->len = cpu_to_le16(0xdead);
rx->flags = cpu_to_le16(0xbeef);
/* Map skb for the DMA */
- dma_addr = dma_map_single(dma_dev, skb->data,
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+ dma_addr = dma_map_single(dma_dev, buf, BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(dma_dev, dma_addr)) {
bgmac_err(bgmac, "DMA mapping error\n");
- dev_kfree_skb(skb);
+ put_page(virt_to_head_page(buf));
return -ENOMEM;
}
/* Update the slot */
- slot->skb = skb;
+ slot->buf = buf;
slot->dma_addr = dma_addr;
return 0;
@@ -343,8 +343,9 @@ static int bgmac_dma_rx_read(struct bgma
while (ring->start != ring->end) {
struct device *dma_dev = bgmac->core->dma_dev;
struct bgmac_slot_info *slot = &ring->slots[ring->start];
- struct sk_buff *skb = slot->skb;
- struct bgmac_rx_header *rx;
+ struct bgmac_rx_header *rx = slot->buf;
+ struct sk_buff *skb;
+ void *buf = slot->buf;
u16 len, flags;
/* Unmap buffer to make it accessible to the CPU */
@@ -352,7 +353,6 @@ static int bgmac_dma_rx_read(struct bgma
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
/* Get info from the header */
- rx = (struct bgmac_rx_header *)skb->data;
len = le16_to_cpu(rx->len);
flags = le16_to_cpu(rx->flags);
@@ -393,12 +393,13 @@ static int bgmac_dma_rx_read(struct bgma
dma_unmap_single(dma_dev, old_dma_addr,
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+ skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
skb_checksum_none_assert(skb);
skb->protocol = eth_type_trans(skb, bgmac->net_dev);
- netif_receive_skb(skb);
+ napi_gro_receive(&bgmac->napi, skb);
handled++;
} while (0);
@@ -434,12 +435,11 @@ static bool bgmac_dma_unaligned(struct b
return false;
}
-static void bgmac_dma_ring_free(struct bgmac *bgmac,
- struct bgmac_dma_ring *ring)
+static void bgmac_dma_tx_ring_free(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
{
struct device *dma_dev = bgmac->core->dma_dev;
struct bgmac_slot_info *slot;
- int size;
int i;
for (i = 0; i < ring->num_slots; i++) {
@@ -451,23 +451,55 @@ static void bgmac_dma_ring_free(struct b
dev_kfree_skb(slot->skb);
}
}
+}
+
+static void bgmac_dma_rx_ring_free(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_slot_info *slot;
+ int i;
+
+ for (i = 0; i < ring->num_slots; i++) {
+ slot = &ring->slots[i];
+ if (!slot->buf)
+ continue;
- if (ring->cpu_base) {
- /* Free ring of descriptors */
- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
- dma_free_coherent(dma_dev, size, ring->cpu_base,
- ring->dma_base);
+ if (slot->dma_addr)
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ put_page(virt_to_head_page(slot->buf));
}
}
+static void bgmac_dma_ring_desc_free(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ int size;
+
+ if (!ring->cpu_base)
+ return;
+
+ /* Free ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ dma_free_coherent(dma_dev, size, ring->cpu_base,
+ ring->dma_base);
+}
+
static void bgmac_dma_free(struct bgmac *bgmac)
{
int i;
- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
- bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]);
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
- bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]);
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ bgmac_dma_tx_ring_free(bgmac, &bgmac->tx_ring[i]);
+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
+ }
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ bgmac_dma_rx_ring_free(bgmac, &bgmac->rx_ring[i]);
+ bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
+ }
}
static int bgmac_dma_alloc(struct bgmac *bgmac)
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -362,6 +362,8 @@
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
+#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE) + \
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */
@@ -383,7 +385,10 @@
#define ETHER_MAX_LEN 1518
struct bgmac_slot_info {
- struct sk_buff *skb;
+ union {
+ struct sk_buff *skb;
+ void *buf;
+ };
dma_addr_t dma_addr;
};

View File

@ -1,267 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 23 Mar 2015 02:42:26 +0100
Subject: [PATCH] bgmac: implement scatter/gather support
Always use software checksumming, since the hardware does not have any
checksum offload support.
This significantly improves local TCP tx performance.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -115,53 +115,91 @@ static void bgmac_dma_tx_enable(struct b
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
}
+static void
+bgmac_dma_tx_add_buf(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
+ int i, int len, u32 ctl0)
+{
+ struct bgmac_slot_info *slot;
+ struct bgmac_dma_desc *dma_desc;
+ u32 ctl1;
+
+ if (i == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+
+ ctl1 = len & BGMAC_DESC_CTL1_LEN;
+
+ slot = &ring->slots[i];
+ dma_desc = &ring->cpu_base[i];
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+}
+
static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
struct bgmac_dma_ring *ring,
struct sk_buff *skb)
{
struct device *dma_dev = bgmac->core->dma_dev;
struct net_device *net_dev = bgmac->net_dev;
- struct bgmac_dma_desc *dma_desc;
- struct bgmac_slot_info *slot;
- u32 ctl0, ctl1;
+ struct bgmac_slot_info *slot = &ring->slots[ring->end];
int free_slots;
+ int nr_frags;
+ u32 flags;
+ int index = ring->end;
+ int i;
if (skb->len > BGMAC_DESC_CTL1_LEN) {
bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
- goto err_stop_drop;
+ goto err_drop;
}
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ skb_checksum_help(skb);
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+
if (ring->start <= ring->end)
free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
else
free_slots = ring->start - ring->end;
- if (free_slots == 1) {
+
+ if (free_slots <= nr_frags + 1) {
bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
netif_stop_queue(net_dev);
return NETDEV_TX_BUSY;
}
- slot = &ring->slots[ring->end];
- slot->skb = skb;
- slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len,
+ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb_headlen(skb),
DMA_TO_DEVICE);
- if (dma_mapping_error(dma_dev, slot->dma_addr)) {
- bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
- ring->mmio_base);
- goto err_stop_drop;
- }
+ if (unlikely(dma_mapping_error(dma_dev, slot->dma_addr)))
+ goto err_dma_head;
- ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
- if (ring->end == ring->num_slots - 1)
- ctl0 |= BGMAC_DESC_CTL0_EOT;
- ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
+ flags = BGMAC_DESC_CTL0_SOF;
+ if (!nr_frags)
+ flags |= BGMAC_DESC_CTL0_EOF | BGMAC_DESC_CTL0_IOC;
+
+ bgmac_dma_tx_add_buf(bgmac, ring, index, skb_headlen(skb), flags);
+ flags = 0;
+
+ for (i = 0; i < nr_frags; i++) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ int len = skb_frag_size(frag);
+
+ index = (index + 1) % BGMAC_TX_RING_SLOTS;
+ slot = &ring->slots[index];
+ slot->dma_addr = skb_frag_dma_map(dma_dev, frag, 0,
+ len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(dma_dev, slot->dma_addr)))
+ goto err_dma;
- dma_desc = ring->cpu_base;
- dma_desc += ring->end;
- dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
- dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
- dma_desc->ctl0 = cpu_to_le32(ctl0);
- dma_desc->ctl1 = cpu_to_le32(ctl1);
+ if (i == nr_frags - 1)
+ flags |= BGMAC_DESC_CTL0_EOF | BGMAC_DESC_CTL0_IOC;
+
+ bgmac_dma_tx_add_buf(bgmac, ring, index, len, flags);
+ }
+
+ slot->skb = skb;
netdev_sent_queue(net_dev, skb->len);
@@ -170,20 +208,35 @@ static netdev_tx_t bgmac_dma_tx_add(stru
/* Increase ring->end to point empty slot. We tell hardware the first
* slot it should *not* read.
*/
- if (++ring->end >= BGMAC_TX_RING_SLOTS)
- ring->end = 0;
+ ring->end = (index + 1) % BGMAC_TX_RING_SLOTS;
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
ring->index_base +
ring->end * sizeof(struct bgmac_dma_desc));
- /* Always keep one slot free to allow detecting bugged calls. */
- if (--free_slots == 1)
+ free_slots -= nr_frags + 1;
+ if (free_slots < 8)
netif_stop_queue(net_dev);
return NETDEV_TX_OK;
-err_stop_drop:
- netif_stop_queue(net_dev);
+err_dma:
+ dma_unmap_single(dma_dev, slot->dma_addr, skb_headlen(skb),
+ DMA_TO_DEVICE);
+
+ while (i > 0) {
+ int index = (ring->end + i) % BGMAC_TX_RING_SLOTS;
+ struct bgmac_slot_info *slot = &ring->slots[index];
+ u32 ctl1 = le32_to_cpu(ring->cpu_base[index].ctl1);
+ int len = ctl1 & BGMAC_DESC_CTL1_LEN;
+
+ dma_unmap_page(dma_dev, slot->dma_addr, len, DMA_TO_DEVICE);
+ }
+
+err_dma_head:
+ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
+ ring->mmio_base);
+
+err_drop:
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -205,32 +258,45 @@ static void bgmac_dma_tx_free(struct bgm
while (ring->start != empty_slot) {
struct bgmac_slot_info *slot = &ring->slots[ring->start];
+ u32 ctl1 = le32_to_cpu(ring->cpu_base[ring->start].ctl1);
+ int len = ctl1 & BGMAC_DESC_CTL1_LEN;
- if (slot->skb) {
+ if (!slot->dma_addr) {
+ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
+ ring->start, ring->end);
+ goto next;
+ }
+
+ if (ctl1 & BGMAC_DESC_CTL0_SOF)
/* Unmap no longer used buffer */
- dma_unmap_single(dma_dev, slot->dma_addr,
- slot->skb->len, DMA_TO_DEVICE);
- slot->dma_addr = 0;
+ dma_unmap_single(dma_dev, slot->dma_addr, len,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dma_dev, slot->dma_addr, len,
+ DMA_TO_DEVICE);
+ if (slot->skb) {
bytes_compl += slot->skb->len;
pkts_compl++;
/* Free memory! :) */
dev_kfree_skb(slot->skb);
slot->skb = NULL;
- } else {
- bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
- ring->start, ring->end);
}
+next:
+ slot->dma_addr = 0;
if (++ring->start >= BGMAC_TX_RING_SLOTS)
ring->start = 0;
freed = true;
}
+ if (!pkts_compl)
+ return;
+
netdev_completed_queue(bgmac->net_dev, pkts_compl, bytes_compl);
- if (freed && netif_queue_stopped(bgmac->net_dev))
+ if (netif_queue_stopped(bgmac->net_dev))
netif_wake_queue(bgmac->net_dev);
}
@@ -439,17 +505,25 @@ static void bgmac_dma_tx_ring_free(struc
struct bgmac_dma_ring *ring)
{
struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_desc *dma_desc = ring->cpu_base;
struct bgmac_slot_info *slot;
int i;
for (i = 0; i < ring->num_slots; i++) {
+ int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN;
+
slot = &ring->slots[i];
- if (slot->skb) {
- if (slot->dma_addr)
- dma_unmap_single(dma_dev, slot->dma_addr,
- slot->skb->len, DMA_TO_DEVICE);
- dev_kfree_skb(slot->skb);
- }
+ dev_kfree_skb(slot->skb);
+
+ if (!slot->dma_addr)
+ continue;
+
+ if (slot->skb)
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dma_dev, slot->dma_addr,
+ len, DMA_TO_DEVICE);
}
}
@@ -1583,6 +1657,10 @@ static int bgmac_probe(struct bcma_devic
goto err_dma_free;
}
+ net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ net_dev->hw_features = net_dev->features;
+ net_dev->vlan_features = net_dev->features;
+
err = register_netdev(bgmac->net_dev);
if (err) {
bgmac_err(bgmac, "Cannot register net device\n");

View File

@ -1,125 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 09:58:56 +0200
Subject: [PATCH] bgmac: simplify tx ring index handling
Keep incrementing ring->start and ring->end instead of pointing it to
the actual ring slot entry. This simplifies the calculation of the
number of free slots.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -142,11 +142,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
{
struct device *dma_dev = bgmac->core->dma_dev;
struct net_device *net_dev = bgmac->net_dev;
- struct bgmac_slot_info *slot = &ring->slots[ring->end];
- int free_slots;
+ int index = ring->end % BGMAC_TX_RING_SLOTS;
+ struct bgmac_slot_info *slot = &ring->slots[index];
int nr_frags;
u32 flags;
- int index = ring->end;
int i;
if (skb->len > BGMAC_DESC_CTL1_LEN) {
@@ -159,12 +158,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
nr_frags = skb_shinfo(skb)->nr_frags;
- if (ring->start <= ring->end)
- free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
- else
- free_slots = ring->start - ring->end;
-
- if (free_slots <= nr_frags + 1) {
+ /* ring->end - ring->start will return the number of valid slots,
+ * even when ring->end overflows
+ */
+ if (ring->end - ring->start + nr_frags + 1 >= BGMAC_TX_RING_SLOTS) {
bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
netif_stop_queue(net_dev);
return NETDEV_TX_BUSY;
@@ -200,7 +197,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru
}
slot->skb = skb;
-
+ ring->end += nr_frags + 1;
netdev_sent_queue(net_dev, skb->len);
wmb();
@@ -208,13 +205,12 @@ static netdev_tx_t bgmac_dma_tx_add(stru
/* Increase ring->end to point empty slot. We tell hardware the first
* slot it should *not* read.
*/
- ring->end = (index + 1) % BGMAC_TX_RING_SLOTS;
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
ring->index_base +
- ring->end * sizeof(struct bgmac_dma_desc));
+ (ring->end % BGMAC_TX_RING_SLOTS) *
+ sizeof(struct bgmac_dma_desc));
- free_slots -= nr_frags + 1;
- if (free_slots < 8)
+ if (ring->end - ring->start >= BGMAC_TX_RING_SLOTS - 8)
netif_stop_queue(net_dev);
return NETDEV_TX_OK;
@@ -256,17 +252,17 @@ static void bgmac_dma_tx_free(struct bgm
empty_slot &= BGMAC_DMA_TX_STATDPTR;
empty_slot /= sizeof(struct bgmac_dma_desc);
- while (ring->start != empty_slot) {
- struct bgmac_slot_info *slot = &ring->slots[ring->start];
- u32 ctl1 = le32_to_cpu(ring->cpu_base[ring->start].ctl1);
- int len = ctl1 & BGMAC_DESC_CTL1_LEN;
+ while (ring->start != ring->end) {
+ int slot_idx = ring->start % BGMAC_TX_RING_SLOTS;
+ struct bgmac_slot_info *slot = &ring->slots[slot_idx];
+ u32 ctl1;
+ int len;
- if (!slot->dma_addr) {
- bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
- ring->start, ring->end);
- goto next;
- }
+ if (slot_idx == empty_slot)
+ break;
+ ctl1 = le32_to_cpu(ring->cpu_base[slot_idx].ctl1);
+ len = ctl1 & BGMAC_DESC_CTL1_LEN;
if (ctl1 & BGMAC_DESC_CTL0_SOF)
/* Unmap no longer used buffer */
dma_unmap_single(dma_dev, slot->dma_addr, len,
@@ -284,10 +280,8 @@ static void bgmac_dma_tx_free(struct bgm
slot->skb = NULL;
}
-next:
slot->dma_addr = 0;
- if (++ring->start >= BGMAC_TX_RING_SLOTS)
- ring->start = 0;
+ ring->start++;
freed = true;
}
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -414,10 +414,10 @@ enum bgmac_dma_ring_type {
* empty.
*/
struct bgmac_dma_ring {
- u16 num_slots;
- u16 start;
- u16 end;
+ u32 start;
+ u32 end;
+ u16 num_slots;
u16 mmio_base;
struct bgmac_dma_desc *cpu_base;
dma_addr_t dma_base;

View File

@ -1,87 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 10:08:04 +0200
Subject: [PATCH] bgmac: leave interrupts disabled as long as there is work
to do
Always poll rx and tx during NAPI poll instead of relying on the status
of the first interrupt. This prevents bgmac_poll from leaving unfinished
work around until the next IRQ.
In my tests this makes bridging/routing throughput under heavy load more
stable and ensures that no new IRQs arrive as long as bgmac_poll uses up
the entire budget.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1109,8 +1109,6 @@ static void bgmac_chip_reset(struct bgma
bgmac_phy_init(bgmac);
netdev_reset_queue(bgmac->net_dev);
-
- bgmac->int_status = 0;
}
static void bgmac_chip_intrs_on(struct bgmac *bgmac)
@@ -1225,14 +1223,13 @@ static irqreturn_t bgmac_interrupt(int i
if (!int_status)
return IRQ_NONE;
- /* Ack */
- bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
+ int_status &= ~(BGMAC_IS_TX0 | BGMAC_IS_RX);
+ if (int_status)
+ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", int_status);
/* Disable new interrupts until handling existing ones */
bgmac_chip_intrs_off(bgmac);
- bgmac->int_status = int_status;
-
napi_schedule(&bgmac->napi);
return IRQ_HANDLED;
@@ -1241,25 +1238,17 @@ static irqreturn_t bgmac_interrupt(int i
static int bgmac_poll(struct napi_struct *napi, int weight)
{
struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
- struct bgmac_dma_ring *ring;
int handled = 0;
- if (bgmac->int_status & BGMAC_IS_TX0) {
- ring = &bgmac->tx_ring[0];
- bgmac_dma_tx_free(bgmac, ring);
- bgmac->int_status &= ~BGMAC_IS_TX0;
- }
+ /* Ack */
+ bgmac_write(bgmac, BGMAC_INT_STATUS, ~0);
- if (bgmac->int_status & BGMAC_IS_RX) {
- ring = &bgmac->rx_ring[0];
- handled += bgmac_dma_rx_read(bgmac, ring, weight);
- bgmac->int_status &= ~BGMAC_IS_RX;
- }
+ bgmac_dma_tx_free(bgmac, &bgmac->tx_ring[0]);
+ handled += bgmac_dma_rx_read(bgmac, &bgmac->rx_ring[0], weight);
- if (bgmac->int_status) {
- bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
- bgmac->int_status = 0;
- }
+ /* Poll again if more events arrived in the meantime */
+ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX))
+ return handled;
if (handled < weight) {
napi_complete(napi);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -452,7 +452,6 @@ struct bgmac {
/* Int */
u32 int_mask;
- u32 int_status;
/* Current MAC state */
int mac_speed;

View File

@ -1,66 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 10:13:28 +0200
Subject: [PATCH] bgmac: set received skb headroom to NET_SKB_PAD
A packet buffer offset of 30 bytes is inefficient, because the first 2
bytes end up in a different cacheline.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -346,13 +346,13 @@ static int bgmac_dma_rx_skb_for_slot(str
return -ENOMEM;
/* Poison - if everything goes fine, hardware will overwrite it */
- rx = buf;
+ rx = buf + BGMAC_RX_BUF_OFFSET;
rx->len = cpu_to_le16(0xdead);
rx->flags = cpu_to_le16(0xbeef);
/* Map skb for the DMA */
- dma_addr = dma_map_single(dma_dev, buf, BGMAC_RX_BUF_SIZE,
- DMA_FROM_DEVICE);
+ dma_addr = dma_map_single(dma_dev, buf + BGMAC_RX_BUF_OFFSET,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(dma_dev, dma_addr)) {
bgmac_err(bgmac, "DMA mapping error\n");
put_page(virt_to_head_page(buf));
@@ -403,7 +403,7 @@ static int bgmac_dma_rx_read(struct bgma
while (ring->start != ring->end) {
struct device *dma_dev = bgmac->core->dma_dev;
struct bgmac_slot_info *slot = &ring->slots[ring->start];
- struct bgmac_rx_header *rx = slot->buf;
+ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
struct sk_buff *skb;
void *buf = slot->buf;
u16 len, flags;
@@ -454,8 +454,10 @@ static int bgmac_dma_rx_read(struct bgma
BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
- skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
- skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
+ skb_put(skb, BGMAC_RX_FRAME_OFFSET +
+ BGMAC_RX_BUF_OFFSET + len);
+ skb_pull(skb, BGMAC_RX_FRAME_OFFSET +
+ BGMAC_RX_BUF_OFFSET);
skb_checksum_none_assert(skb);
skb->protocol = eth_type_trans(skb, bgmac->net_dev);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -360,9 +360,11 @@
#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
+#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
+ BGMAC_RX_FRAME_OFFSET)
#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
-#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE) + \
+#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */

View File

@ -1,130 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 22:23:07 +0200
Subject: [PATCH] bgmac: simplify/optimize rx DMA error handling
Allocate a new buffer before processing the completed one. If allocation
fails, reuse the old buffer.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -386,6 +386,19 @@ static void bgmac_dma_rx_setup_desc(stru
dma_desc->ctl1 = cpu_to_le32(ctl1);
}
+static void bgmac_dma_rx_poison_buf(struct device *dma_dev,
+ struct bgmac_slot_info *slot)
+{
+ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
+
+ dma_sync_single_for_cpu(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ rx->len = cpu_to_le16(0xdead);
+ rx->flags = cpu_to_le16(0xbeef);
+ dma_sync_single_for_device(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
+}
+
static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
int weight)
{
@@ -406,53 +419,35 @@ static int bgmac_dma_rx_read(struct bgma
struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
struct sk_buff *skb;
void *buf = slot->buf;
+ dma_addr_t dma_addr = slot->dma_addr;
u16 len, flags;
- /* Unmap buffer to make it accessible to the CPU */
- dma_sync_single_for_cpu(dma_dev, slot->dma_addr,
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-
- /* Get info from the header */
- len = le16_to_cpu(rx->len);
- flags = le16_to_cpu(rx->flags);
-
do {
- dma_addr_t old_dma_addr = slot->dma_addr;
- int err;
+ /* Prepare new skb as replacement */
+ if (bgmac_dma_rx_skb_for_slot(bgmac, slot)) {
+ bgmac_dma_rx_poison_buf(dma_dev, slot);
+ break;
+ }
+
+ /* Unmap buffer to make it accessible to the CPU */
+ dma_unmap_single(dma_dev, dma_addr,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+
+ /* Get info from the header */
+ len = le16_to_cpu(rx->len);
+ flags = le16_to_cpu(rx->flags);
/* Check for poison and drop or pass the packet */
if (len == 0xdead && flags == 0xbeef) {
bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
ring->start);
- dma_sync_single_for_device(dma_dev,
- slot->dma_addr,
- BGMAC_RX_BUF_SIZE,
- DMA_FROM_DEVICE);
+ put_page(virt_to_head_page(buf));
break;
}
/* Omit CRC. */
len -= ETH_FCS_LEN;
- /* Prepare new skb as replacement */
- err = bgmac_dma_rx_skb_for_slot(bgmac, slot);
- if (err) {
- /* Poison the old skb */
- rx->len = cpu_to_le16(0xdead);
- rx->flags = cpu_to_le16(0xbeef);
-
- dma_sync_single_for_device(dma_dev,
- slot->dma_addr,
- BGMAC_RX_BUF_SIZE,
- DMA_FROM_DEVICE);
- break;
- }
- bgmac_dma_rx_setup_desc(bgmac, ring, ring->start);
-
- /* Unmap old skb, we'll pass it to the netfif */
- dma_unmap_single(dma_dev, old_dma_addr,
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-
skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
skb_put(skb, BGMAC_RX_FRAME_OFFSET +
BGMAC_RX_BUF_OFFSET + len);
@@ -465,6 +460,8 @@ static int bgmac_dma_rx_read(struct bgma
handled++;
} while (0);
+ bgmac_dma_rx_setup_desc(bgmac, ring, ring->start);
+
if (++ring->start >= BGMAC_RX_RING_SLOTS)
ring->start = 0;
@@ -532,14 +529,14 @@ static void bgmac_dma_rx_ring_free(struc
for (i = 0; i < ring->num_slots; i++) {
slot = &ring->slots[i];
- if (!slot->buf)
+ if (!slot->dma_addr)
continue;
- if (slot->dma_addr)
- dma_unmap_single(dma_dev, slot->dma_addr,
- BGMAC_RX_BUF_SIZE,
- DMA_FROM_DEVICE);
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ BGMAC_RX_BUF_SIZE,
+ DMA_FROM_DEVICE);
put_page(virt_to_head_page(slot->buf));
+ slot->dma_addr = 0;
}
}

View File

@ -1,27 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 22:28:20 +0200
Subject: [PATCH] bgmac: add check for oversized packets
In very rare cases, the MAC can catch an internal buffer that is bigger
than it's supposed to be. Instead of crashing the kernel, simply pass
the buffer back to the hardware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -445,6 +445,13 @@ static int bgmac_dma_rx_read(struct bgma
break;
}
+ if (len > BGMAC_RX_ALLOC_SIZE) {
+ bgmac_err(bgmac, "Found oversized packet at slot %d, DMA issue!\n",
+ ring->start);
+ put_page(virt_to_head_page(buf));
+ break;
+ }
+
/* Omit CRC. */
len -= ETH_FCS_LEN;

View File

@ -1,23 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 22:36:16 +0200
Subject: [PATCH] bgmac: increase rx ring size from 511 to 512
Limiting it to 511 looks like a failed attempt at leaving one descriptor
empty to allow the hardware to stop processing a buffer that has not
been prepared yet. However, this doesn't work because this affects the
total ring size as well
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -356,7 +356,7 @@
#define BGMAC_MAX_RX_RINGS 1
#define BGMAC_TX_RING_SLOTS 128
-#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */
+#define BGMAC_RX_RING_SLOTS 512
#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */

View File

@ -1,184 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 23:19:32 +0200
Subject: [PATCH] bgmac: simplify dma init/cleanup
Instead of allocating buffers at device init time and initializing
descriptors at device open, do both at the same time (during open).
Free all buffers when closing the device.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -562,18 +562,26 @@ static void bgmac_dma_ring_desc_free(str
ring->dma_base);
}
-static void bgmac_dma_free(struct bgmac *bgmac)
+static void bgmac_dma_cleanup(struct bgmac *bgmac)
{
int i;
- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
bgmac_dma_tx_ring_free(bgmac, &bgmac->tx_ring[i]);
- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
- }
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
bgmac_dma_rx_ring_free(bgmac, &bgmac->rx_ring[i]);
+}
+
+static void bgmac_dma_free(struct bgmac *bgmac)
+{
+ int i;
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
- }
}
static int bgmac_dma_alloc(struct bgmac *bgmac)
@@ -621,8 +629,6 @@ static int bgmac_dma_alloc(struct bgmac
}
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
- int j;
-
ring = &bgmac->rx_ring[i];
ring->num_slots = BGMAC_RX_RING_SLOTS;
ring->mmio_base = ring_base[i];
@@ -645,15 +651,6 @@ static int bgmac_dma_alloc(struct bgmac
ring->index_base = lower_32_bits(ring->dma_base);
else
ring->index_base = 0;
-
- /* Alloc RX slots */
- for (j = 0; j < ring->num_slots; j++) {
- err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
- if (err) {
- bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n");
- goto err_dma_free;
- }
- }
}
return 0;
@@ -663,10 +660,10 @@ err_dma_free:
return -ENOMEM;
}
-static void bgmac_dma_init(struct bgmac *bgmac)
+static int bgmac_dma_init(struct bgmac *bgmac)
{
struct bgmac_dma_ring *ring;
- int i;
+ int i, err;
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
ring = &bgmac->tx_ring[i];
@@ -698,8 +695,13 @@ static void bgmac_dma_init(struct bgmac
if (ring->unaligned)
bgmac_dma_rx_enable(bgmac, ring);
- for (j = 0; j < ring->num_slots; j++)
+ for (j = 0; j < ring->num_slots; j++) {
+ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
+ if (err)
+ goto error;
+
bgmac_dma_rx_setup_desc(bgmac, ring, j);
+ }
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
ring->index_base +
@@ -708,6 +710,12 @@ static void bgmac_dma_init(struct bgmac
ring->start = 0;
ring->end = 0;
}
+
+ return 0;
+
+error:
+ bgmac_dma_cleanup(bgmac);
+ return err;
}
/**************************************************
@@ -1183,11 +1191,8 @@ static void bgmac_enable(struct bgmac *b
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
-static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
+static void bgmac_chip_init(struct bgmac *bgmac)
{
- struct bgmac_dma_ring *ring;
- int i;
-
/* 1 interrupt per received frame */
bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
@@ -1205,16 +1210,7 @@ static void bgmac_chip_init(struct bgmac
bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
- if (full_init) {
- bgmac_dma_init(bgmac);
- if (1) /* FIXME: is there any case we don't want IRQs? */
- bgmac_chip_intrs_on(bgmac);
- } else {
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
- ring = &bgmac->rx_ring[i];
- bgmac_dma_rx_enable(bgmac, ring);
- }
- }
+ bgmac_chip_intrs_on(bgmac);
bgmac_enable(bgmac);
}
@@ -1274,23 +1270,27 @@ static int bgmac_open(struct net_device
int err = 0;
bgmac_chip_reset(bgmac);
+
+ err = bgmac_dma_init(bgmac);
+ if (err)
+ return err;
+
/* Specs say about reclaiming rings here, but we do that in DMA init */
- bgmac_chip_init(bgmac, true);
+ bgmac_chip_init(bgmac);
err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED,
KBUILD_MODNAME, net_dev);
if (err < 0) {
bgmac_err(bgmac, "IRQ request error: %d!\n", err);
- goto err_out;
+ bgmac_dma_cleanup(bgmac);
+ return err;
}
napi_enable(&bgmac->napi);
phy_start(bgmac->phy_dev);
netif_carrier_on(net_dev);
-
-err_out:
- return err;
+ return 0;
}
static int bgmac_stop(struct net_device *net_dev)
@@ -1306,6 +1306,7 @@ static int bgmac_stop(struct net_device
free_irq(bgmac->core->irq, net_dev);
bgmac_chip_reset(bgmac);
+ bgmac_dma_cleanup(bgmac);
return 0;
}

View File

@ -1,88 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 11:59:47 +0200
Subject: [PATCH] bgmac: fix DMA rx corruption
The driver needs to inform the hardware about the first invalid (not yet
filled) rx slot, by writing its DMA descriptor pointer offset to the
BGMAC_DMA_RX_INDEX register.
This register was set to a value exceeding the rx ring size, effectively
allowing the hardware constant access to the full ring, regardless of
which slots are initialized.
To fix this issue, always mark the last filled rx slot as invalid.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -366,6 +366,16 @@ static int bgmac_dma_rx_skb_for_slot(str
return 0;
}
+static void bgmac_dma_rx_update_index(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ wmb();
+
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
+ ring->index_base +
+ ring->end * sizeof(struct bgmac_dma_desc));
+}
+
static void bgmac_dma_rx_setup_desc(struct bgmac *bgmac,
struct bgmac_dma_ring *ring, int desc_idx)
{
@@ -384,6 +394,8 @@ static void bgmac_dma_rx_setup_desc(stru
dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr));
dma_desc->ctl0 = cpu_to_le32(ctl0);
dma_desc->ctl1 = cpu_to_le32(ctl1);
+
+ ring->end = desc_idx;
}
static void bgmac_dma_rx_poison_buf(struct device *dma_dev,
@@ -411,9 +423,7 @@ static int bgmac_dma_rx_read(struct bgma
end_slot &= BGMAC_DMA_RX_STATDPTR;
end_slot /= sizeof(struct bgmac_dma_desc);
- ring->end = end_slot;
-
- while (ring->start != ring->end) {
+ while (ring->start != end_slot) {
struct device *dma_dev = bgmac->core->dma_dev;
struct bgmac_slot_info *slot = &ring->slots[ring->start];
struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
@@ -476,6 +486,8 @@ static int bgmac_dma_rx_read(struct bgma
break;
}
+ bgmac_dma_rx_update_index(bgmac, ring);
+
return handled;
}
@@ -695,6 +707,8 @@ static int bgmac_dma_init(struct bgmac *
if (ring->unaligned)
bgmac_dma_rx_enable(bgmac, ring);
+ ring->start = 0;
+ ring->end = 0;
for (j = 0; j < ring->num_slots; j++) {
err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
if (err)
@@ -703,12 +717,7 @@ static int bgmac_dma_init(struct bgmac *
bgmac_dma_rx_setup_desc(bgmac, ring, j);
}
- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
- ring->index_base +
- ring->num_slots * sizeof(struct bgmac_dma_desc));
-
- ring->start = 0;
- ring->end = 0;
+ bgmac_dma_rx_update_index(bgmac, ring);
}
return 0;

View File

@ -1,132 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 12 Apr 2015 23:28:38 +0200
Subject: [PATCH] bgmac: drop ring->num_slots
The ring size is always known at compile time, so make the code a bit
more efficient
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -123,7 +123,7 @@ bgmac_dma_tx_add_buf(struct bgmac *bgmac
struct bgmac_dma_desc *dma_desc;
u32 ctl1;
- if (i == ring->num_slots - 1)
+ if (i == BGMAC_TX_RING_SLOTS - 1)
ctl0 |= BGMAC_DESC_CTL0_EOT;
ctl1 = len & BGMAC_DESC_CTL1_LEN;
@@ -382,7 +382,7 @@ static void bgmac_dma_rx_setup_desc(stru
struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx;
u32 ctl0 = 0, ctl1 = 0;
- if (desc_idx == ring->num_slots - 1)
+ if (desc_idx == BGMAC_RX_RING_SLOTS - 1)
ctl0 |= BGMAC_DESC_CTL0_EOT;
ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
/* Is there any BGMAC device that requires extension? */
@@ -521,7 +521,7 @@ static void bgmac_dma_tx_ring_free(struc
struct bgmac_slot_info *slot;
int i;
- for (i = 0; i < ring->num_slots; i++) {
+ for (i = 0; i < BGMAC_TX_RING_SLOTS; i++) {
int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN;
slot = &ring->slots[i];
@@ -546,7 +546,7 @@ static void bgmac_dma_rx_ring_free(struc
struct bgmac_slot_info *slot;
int i;
- for (i = 0; i < ring->num_slots; i++) {
+ for (i = 0; i < BGMAC_RX_RING_SLOTS; i++) {
slot = &ring->slots[i];
if (!slot->dma_addr)
continue;
@@ -560,7 +560,8 @@ static void bgmac_dma_rx_ring_free(struc
}
static void bgmac_dma_ring_desc_free(struct bgmac *bgmac,
- struct bgmac_dma_ring *ring)
+ struct bgmac_dma_ring *ring,
+ int num_slots)
{
struct device *dma_dev = bgmac->core->dma_dev;
int size;
@@ -569,7 +570,7 @@ static void bgmac_dma_ring_desc_free(str
return;
/* Free ring of descriptors */
- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ size = num_slots * sizeof(struct bgmac_dma_desc);
dma_free_coherent(dma_dev, size, ring->cpu_base,
ring->dma_base);
}
@@ -590,10 +591,12 @@ static void bgmac_dma_free(struct bgmac
int i;
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i],
+ BGMAC_TX_RING_SLOTS);
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
- bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
+ bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i],
+ BGMAC_RX_RING_SLOTS);
}
static int bgmac_dma_alloc(struct bgmac *bgmac)
@@ -616,11 +619,10 @@ static int bgmac_dma_alloc(struct bgmac
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
ring = &bgmac->tx_ring[i];
- ring->num_slots = BGMAC_TX_RING_SLOTS;
ring->mmio_base = ring_base[i];
/* Alloc ring of descriptors */
- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ size = BGMAC_TX_RING_SLOTS * sizeof(struct bgmac_dma_desc);
ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
&ring->dma_base,
GFP_KERNEL);
@@ -642,11 +644,10 @@ static int bgmac_dma_alloc(struct bgmac
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
ring = &bgmac->rx_ring[i];
- ring->num_slots = BGMAC_RX_RING_SLOTS;
ring->mmio_base = ring_base[i];
/* Alloc ring of descriptors */
- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ size = BGMAC_RX_RING_SLOTS * sizeof(struct bgmac_dma_desc);
ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
&ring->dma_base,
GFP_KERNEL);
@@ -709,7 +710,7 @@ static int bgmac_dma_init(struct bgmac *
ring->start = 0;
ring->end = 0;
- for (j = 0; j < ring->num_slots; j++) {
+ for (j = 0; j < BGMAC_RX_RING_SLOTS; j++) {
err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
if (err)
goto error;
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -419,11 +419,10 @@ struct bgmac_dma_ring {
u32 start;
u32 end;
- u16 num_slots;
- u16 mmio_base;
struct bgmac_dma_desc *cpu_base;
dma_addr_t dma_base;
u32 index_base; /* Used for unaligned rings only, otherwise 0 */
+ u16 mmio_base;
bool unaligned;
struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];

View File

@ -1,24 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 13 Apr 2015 15:54:04 +0200
Subject: [PATCH] bgmac: fix MAC soft-reset bit for corerev > 4
Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -198,9 +198,9 @@
#define BGMAC_CMDCFG_TAI 0x00000200
#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
#define BGMAC_CMDCFG_HD_SHIFT 10
-#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */
-#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */
-#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
+#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */
+#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */
+#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
#define BGMAC_CMDCFG_AE 0x00400000
#define BGMAC_CMDCFG_CFE 0x00800000

View File

@ -1,28 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 13 Apr 2015 15:56:26 +0200
Subject: [PATCH] bgmac: reset all 4 GMAC cores on init
On a BCM4709 based device, I found that GMAC cores may be enabled at
probe time, but only become usable after a full reset.
Disable cores before re-enabling them to ensure that they are properly
reset.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1623,8 +1623,11 @@ static int bgmac_probe(struct bcma_devic
ns_core = bcma_find_core_unit(core->bus,
BCMA_CORE_MAC_GBIT,
ns_gmac);
- if (ns_core && !bcma_core_is_enabled(ns_core))
- bcma_core_enable(ns_core, 0);
+ if (!ns_core)
+ continue;
+
+ bcma_core_disable(ns_core, 0);
+ bcma_core_enable(ns_core, 0);
}
}

View File

@ -1,30 +0,0 @@
From 047f89922c6381432501f248d08226ff9adc4ee3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 23 Apr 2015 20:45:25 +0200
Subject: [PATCH][FIX 4.1] bgmac: fix requests for extra polling calls from
NAPI
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After d75b1ade567f ("net: less interrupt masking in NAPI") polling
function has to return whole budget when it wants NAPI to call it again.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Fixes: eb64e2923a886 ("bgmac: leave interrupts disabled as long as there is work to do")
---
drivers/net/ethernet/broadcom/bgmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1260,7 +1260,7 @@ static int bgmac_poll(struct napi_struct
/* Poll again if more events arrived in the meantime */
if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX))
- return handled;
+ return weight;
if (handled < weight) {
napi_complete(napi);

View File

@ -1,89 +0,0 @@
From: Simon Farnsworth <simon@farnz.org.uk>
Date: Sun, 1 Mar 2015 10:54:39 +0000
Subject: [PATCH] pppoe: Use workqueue to die properly when a PADT is received
When a PADT frame is received, the socket may not be in a good state to
close down the PPP interface. The current implementation handles this by
simply blocking all further PPP traffic, and hoping that the lack of traffic
will trigger the user to investigate.
Use schedule_work to get to a process context from which we clear down the
PPP interface, in a fashion analogous to hangup on a TTY-based PPP
interface. This causes pppd to disconnect immediately, and allows tools to
take immediate corrective action.
Note that pppd's rp_pppoe.so plugin has code in it to disable the session
when it disconnects; however, as a consequence of this patch, the session is
already disabled before rp_pppoe.so is asked to disable the session. The
result is a harmless error message:
Failed to disconnect PPPoE socket: 114 Operation already in progress
This message is safe to ignore, as long as the error is 114 Operation
already in progress; in that specific case, it means that the PPPoE session
has already been disabled before pppd tried to disable it.
Signed-off-by: Simon Farnsworth <simon@farnz.org.uk>
Tested-by: Dan Williams <dcbw@redhat.com>
Tested-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -455,6 +455,18 @@ out:
return NET_RX_DROP;
}
+static void pppoe_unbind_sock_work(struct work_struct *work)
+{
+ struct pppox_sock *po = container_of(work, struct pppox_sock,
+ proto.pppoe.padt_work);
+ struct sock *sk = sk_pppox(po);
+
+ lock_sock(sk);
+ pppox_unbind_sock(sk);
+ release_sock(sk);
+ sock_put(sk);
+}
+
/************************************************************************
*
* Receive a PPPoE Discovery frame.
@@ -500,7 +512,8 @@ static int pppoe_disc_rcv(struct sk_buff
}
bh_unlock_sock(sk);
- sock_put(sk);
+ if (!schedule_work(&po->proto.pppoe.padt_work))
+ sock_put(sk);
}
abort:
@@ -613,6 +626,8 @@ static int pppoe_connect(struct socket *
lock_sock(sk);
+ INIT_WORK(&po->proto.pppoe.padt_work, pppoe_unbind_sock_work);
+
error = -EINVAL;
if (sp->sa_protocol != PX_PROTO_OE)
goto end;
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -19,6 +19,7 @@
#include <linux/netdevice.h>
#include <linux/ppp_channel.h>
#include <linux/skbuff.h>
+#include <linux/workqueue.h>
#include <uapi/linux/if_pppox.h>
static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
@@ -32,6 +33,7 @@ struct pppoe_opt {
struct pppoe_addr pa; /* what this socket is bound to*/
struct sockaddr_pppox relay; /* what socket data will be
relayed to (PPPoE relaying) */
+ struct work_struct padt_work;/* Work item for handling PADT */
};
struct pptp_opt {

View File

@ -1,10 +0,0 @@
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -598,6 +598,7 @@ static const struct spi_device_id spi_no
{ "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) },
{ "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
{ "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, 0) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },

View File

@ -1,146 +0,0 @@
From 279c6c7fa64f5763e6b9f05e7ab3840092e702e7 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon, 29 Jun 2015 14:57:48 -1000
Subject: [PATCH] api: fix compatibility of linux/in.h with netinet/in.h
u
This fixes breakage to iproute2 build with recent kernel headers
caused by:
commit a263653ed798216c0069922d7b5237ca49436007
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Wed Jun 17 10:28:27 2015 -0500
netfilter: don't pull include/linux/netfilter.h from netns headers
The issue is that definitions in linux/in.h overlap with those
in netinet/in.h. This patch solves this by introducing the same
mechanism as was used to solve the same problem with linux/in6.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/uapi/linux/in.h | 16 +++++++++++++---
include/uapi/linux/libc-compat.h | 22 ++++++++++++++++++++++
2 files changed, 35 insertions(+), 3 deletions(-)
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -19,8 +19,10 @@
#define _UAPI_LINUX_IN_H
#include <linux/types.h>
+#include <linux/libc-compat.h>
#include <linux/socket.h>
+#if __UAPI_DEF_IN_IPPROTO
/* Standard well-defined IP protocols. */
enum {
IPPROTO_IP = 0, /* Dummy protocol for TCP */
@@ -73,12 +75,14 @@ enum {
#define IPPROTO_RAW IPPROTO_RAW
IPPROTO_MAX
};
+#endif
-
+#if __UAPI_DEF_IN_ADDR
/* Internet address. */
struct in_addr {
__be32 s_addr;
};
+#endif
#define IP_TOS 1
#define IP_TTL 2
@@ -155,6 +159,7 @@ struct in_addr {
/* Request struct for multicast socket ops */
+#if __UAPI_DEF_IP_MREQ
struct ip_mreq {
struct in_addr imr_multiaddr; /* IP multicast address of group */
struct in_addr imr_interface; /* local IP address of interface */
@@ -206,14 +211,18 @@ struct group_filter {
#define GROUP_FILTER_SIZE(numsrc) \
(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+#endif
+#if __UAPI_DEF_IN_PKTINFO
struct in_pktinfo {
int ipi_ifindex;
struct in_addr ipi_spec_dst;
struct in_addr ipi_addr;
};
+#endif
/* Structure describing an Internet (IP) socket address. */
+#if __UAPI_DEF_SOCKADDR_IN
#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
struct sockaddr_in {
__kernel_sa_family_t sin_family; /* Address family */
@@ -225,8 +234,9 @@ struct sockaddr_in {
sizeof(unsigned short int) - sizeof(struct in_addr)];
};
#define sin_zero __pad /* for BSD UNIX comp. -FvK */
+#endif
-
+#if __UAPI_DEF_IN_CLASS
/*
* Definitions of the bits in an Internet address integer.
* On subnets, host and network parts are found according
@@ -277,7 +287,7 @@ struct sockaddr_in {
#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */
#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */
#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */
-
+#endif
/* <asm/byteorder.h> contains the htonl type stuff.. */
#include <asm/byteorder.h>
--- a/include/uapi/linux/libc-compat.h
+++ b/include/uapi/linux/libc-compat.h
@@ -56,6 +56,13 @@
/* GLIBC headers included first so don't define anything
* that would already be defined. */
+#define __UAPI_DEF_IN_ADDR 0
+#define __UAPI_DEF_IN_IPPROTO 0
+#define __UAPI_DEF_IN_PKTINFO 0
+#define __UAPI_DEF_IP_MREQ 0
+#define __UAPI_DEF_SOCKADDR_IN 0
+#define __UAPI_DEF_IN_CLASS 0
+
#define __UAPI_DEF_IN6_ADDR 0
/* The exception is the in6_addr macros which must be defined
* if the glibc code didn't define them. This guard matches
@@ -78,6 +85,13 @@
/* Linux headers included first, and we must define everything
* we need. The expectation is that glibc will check the
* __UAPI_DEF_* defines and adjust appropriately. */
+#define __UAPI_DEF_IN_ADDR 1
+#define __UAPI_DEF_IN_IPPROTO 1
+#define __UAPI_DEF_IN_PKTINFO 1
+#define __UAPI_DEF_IP_MREQ 1
+#define __UAPI_DEF_SOCKADDR_IN 1
+#define __UAPI_DEF_IN_CLASS 1
+
#define __UAPI_DEF_IN6_ADDR 1
/* We unconditionally define the in6_addr macros and glibc must
* coordinate. */
@@ -103,6 +117,14 @@
* that we need. */
#else /* !defined(__GLIBC__) */
+/* Definitions for in.h */
+#define __UAPI_DEF_IN_ADDR 1
+#define __UAPI_DEF_IN_IPPROTO 1
+#define __UAPI_DEF_IN_PKTINFO 1
+#define __UAPI_DEF_IP_MREQ 1
+#define __UAPI_DEF_SOCKADDR_IN 1
+#define __UAPI_DEF_IN_CLASS 1
+
/* Definitions for in6.h */
#define __UAPI_DEF_IN6_ADDR 1
#define __UAPI_DEF_IN6_ADDR_ALT 1

View File

@ -1,27 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 9 May 2015 23:03:47 +0200
Subject: [PATCH] pppoe: drop pppoe device in pppoe_unbind_sock_work
After receiving a PADT and the socket is closed, user space will no
longer drop the reference to the pppoe device.
This leads to errors like this:
[ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2
Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -462,6 +462,10 @@ static void pppoe_unbind_sock_work(struc
struct sock *sk = sk_pppox(po);
lock_sock(sk);
+ if (po->pppoe_dev) {
+ dev_put(po->pppoe_dev);
+ po->pppoe_dev = NULL;
+ }
pppox_unbind_sock(sk);
release_sock(sk);
sock_put(sk);

View File

@ -1,82 +0,0 @@
From 1e311820ec3055e3f08e687de6564692a7cec675 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 28 Jan 2013 20:06:29 +0100
Subject: [PATCH 11/12] USB: EHCI: add ignore_oc flag to disable overcurrent
checking
This patch adds an ignore_oc flag which can be set by EHCI controller
not supporting or wanting to disable overcurrent checking. The EHCI
platform data in include/linux/usb/ehci_pdriver.h is also augmented to
take advantage of this new flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
drivers/usb/host/ehci-hcd.c | 2 +-
drivers/usb/host/ehci-hub.c | 4 ++--
drivers/usb/host/ehci-platform.c | 1 +
drivers/usb/host/ehci.h | 1 +
include/linux/usb/ehci_pdriver.h | 1 +
5 files changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
"USB %x.%x started, EHCI %x.%02x%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff,
- ignore_oc ? ", overcurrent ignored" : "");
+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
ehci_writel(ehci, INTR_MASK,
&ehci->regs->intr_enable); /* Turn On Interrupts */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -633,7 +633,7 @@ ehci_hub_status_data (struct usb_hcd *hc
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
- if (!ignore_oc)
+ if (!ignore_oc && !ehci->ignore_oc)
mask = PORT_CSC | PORT_PEC | PORT_OCC;
else
mask = PORT_CSC | PORT_PEC;
@@ -995,7 +995,7 @@ int ehci_hub_control(
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
- if ((temp & PORT_OCC) && !ignore_oc){
+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
/*
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -264,6 +264,8 @@ static int ehci_platform_probe(struct pl
ehci->big_endian_desc = 1;
if (pdata->big_endian_mmio)
ehci->big_endian_mmio = 1;
+ if (pdata->ignore_oc)
+ ehci->ignore_oc = 1;
#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
if (ehci->big_endian_mmio) {
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -226,6 +226,7 @@ struct ehci_hcd { /* one per controlle
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
unsigned need_oc_pp_cycle:1; /* MPC834X port power */
unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
+ unsigned ignore_oc:1;
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
--- a/include/linux/usb/ehci_pdriver.h
+++ b/include/linux/usb/ehci_pdriver.h
@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
unsigned no_io_watchdog:1;
unsigned reset_on_resume:1;
unsigned dma_mask_64:1;
+ unsigned ignore_oc:1;
/* Turn on all power and clocks */
int (*power_on)(struct platform_device *pdev);

View File

@ -1,86 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 10 Apr 2015 13:35:29 +0200
Subject: [PATCH] jffs2: use .rename2 and add RENAME_WHITEOUT support
It is required for renames on overlayfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -35,7 +35,7 @@ static int jffs2_mkdir (struct inode *,s
static int jffs2_rmdir (struct inode *,struct dentry *);
static int jffs2_mknod (struct inode *,struct dentry *,umode_t,dev_t);
static int jffs2_rename (struct inode *, struct dentry *,
- struct inode *, struct dentry *);
+ struct inode *, struct dentry *, unsigned int);
const struct file_operations jffs2_dir_operations =
{
@@ -57,7 +57,7 @@ const struct inode_operations jffs2_dir_
.mkdir = jffs2_mkdir,
.rmdir = jffs2_rmdir,
.mknod = jffs2_mknod,
- .rename = jffs2_rename,
+ .rename2 = jffs2_rename,
.get_acl = jffs2_get_acl,
.set_acl = jffs2_set_acl,
.setattr = jffs2_setattr,
@@ -756,8 +756,27 @@ static int jffs2_mknod (struct inode *di
return ret;
}
+static int jffs2_whiteout(struct inode *old_dir, struct dentry *old_dentry)
+{
+ struct dentry *wh;
+ int err;
+
+ wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
+ if (!wh)
+ return -ENOMEM;
+
+ err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
+ WHITEOUT_DEV);
+ if (err)
+ return err;
+
+ d_rehash(wh);
+ return 0;
+}
+
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- struct inode *new_dir_i, struct dentry *new_dentry)
+ struct inode *new_dir_i, struct dentry *new_dentry,
+ unsigned int flags)
{
int ret;
struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
@@ -765,6 +784,9 @@ static int jffs2_rename (struct inode *o
uint8_t type;
uint32_t now;
+ if (flags & ~RENAME_WHITEOUT)
+ return -EINVAL;
+
/* The VFS will check for us and prevent trying to rename a
* file over a directory and vice versa, but if it's a directory,
* the VFS can't check whether the victim is empty. The filesystem
@@ -828,9 +850,14 @@ static int jffs2_rename (struct inode *o
if (d_is_dir(old_dentry) && !victim_f)
inc_nlink(new_dir_i);
- /* Unlink the original */
- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
- old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
+ if (flags & RENAME_WHITEOUT)
+ /* Replace with whiteout */
+ ret = jffs2_whiteout(old_dir_i, old_dentry);
+ else
+ /* Unlink the original */
+ ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
+ old_dentry->d_name.name,
+ old_dentry->d_name.len, NULL, now);
/* We don't touch inode->i_nlink */

View File

@ -1,58 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 25 Apr 2015 12:41:32 +0200
Subject: [PATCH] jffs2: add RENAME_EXCHANGE support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -784,7 +784,7 @@ static int jffs2_rename (struct inode *o
uint8_t type;
uint32_t now;
- if (flags & ~RENAME_WHITEOUT)
+ if (flags & ~(RENAME_WHITEOUT | RENAME_EXCHANGE))
return -EINVAL;
/* The VFS will check for us and prevent trying to rename a
@@ -792,7 +792,7 @@ static int jffs2_rename (struct inode *o
* the VFS can't check whether the victim is empty. The filesystem
* needs to do that for itself.
*/
- if (new_dentry->d_inode) {
+ if (new_dentry->d_inode && !(flags & RENAME_EXCHANGE)) {
victim_f = JFFS2_INODE_INFO(new_dentry->d_inode);
if (d_is_dir(new_dentry)) {
struct jffs2_full_dirent *fd;
@@ -827,7 +827,7 @@ static int jffs2_rename (struct inode *o
if (ret)
return ret;
- if (victim_f) {
+ if (victim_f && !(flags & RENAME_EXCHANGE)) {
/* There was a victim. Kill it off nicely */
if (d_is_dir(new_dentry))
clear_nlink(new_dentry->d_inode);
@@ -853,6 +853,12 @@ static int jffs2_rename (struct inode *o
if (flags & RENAME_WHITEOUT)
/* Replace with whiteout */
ret = jffs2_whiteout(old_dir_i, old_dentry);
+ else if (flags & RENAME_EXCHANGE)
+ /* Replace the original */
+ ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
+ new_dentry->d_inode->i_ino, type,
+ old_dentry->d_name.name, old_dentry->d_name.len,
+ now);
else
/* Unlink the original */
ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
@@ -879,7 +885,7 @@ static int jffs2_rename (struct inode *o
return ret;
}
- if (d_is_dir(old_dentry))
+ if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
drop_nlink(old_dir_i);
new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);

View File

@ -1,54 +0,0 @@
From: Stephen Hemminger <stephen@networkplumber.org>
Subject: bridge: allow receiption on disabled port
When an ethernet device is enslaved to a bridge, and the bridge STP
detects loss of carrier (or operational state down), then normally
packet receiption is blocked.
This breaks control applications like WPA which maybe expecting to
receive packets to negotiate to bring link up. The bridge needs to
block forwarding packets from these disabled ports, but there is no
hard requirement to not allow local packet delivery.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -207,11 +207,13 @@ EXPORT_SYMBOL_GPL(br_handle_frame_finish
static int br_handle_local_finish(struct sk_buff *skb)
{
struct net_bridge_port *p = br_port_get_rcu(skb->dev);
- u16 vid = 0;
+ if (p->state != BR_STATE_DISABLED) {
+ u16 vid = 0;
- /* check if vlan is allowed, to avoid spoofing */
- if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid))
- br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
+ /* check if vlan is allowed, to avoid spoofing */
+ if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid))
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
+ }
return 0; /* process further */
}
@@ -285,6 +287,18 @@ rx_handler_result_t br_handle_frame(stru
forward:
switch (p->state) {
+ case BR_STATE_DISABLED:
+ if (ether_addr_equal(p->br->dev->dev_addr, dest))
+ skb->pkt_type = PACKET_HOST;
+
+ if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
+ br_handle_local_finish))
+ break;
+
+ BR_INPUT_SKB_CB(skb)->brdev = p->br->dev;
+ br_pass_frame_up(skb);
+ break;
+
case BR_STATE_FORWARDING:
rhook = rcu_dereference(br_should_route_hook);
if (rhook) {

View File

@ -1,35 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 19 Jul 2015 00:21:57 +0200
Subject: [PATCH] MIPS: kernel: fix sched_getaffinity with MT FPAFF enabled
p->thread.user_cpus_allowed is zero-initialized and is only filled on
the first sched_setaffinity call.
To avoid adding overhead in the task initialization codepath, simply OR
the returned mask in sched_getaffinity with p->cpus_allowed.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
unsigned long __user *user_mask_ptr)
{
unsigned int real_len;
- cpumask_t mask;
+ cpumask_t allowed, mask;
int retval;
struct task_struct *p;
@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
if (retval)
goto out_unlock;
- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
+ cpumask_and(&mask, &allowed, cpu_active_mask);
out_unlock:
read_unlock(&tasklist_lock);

View File

@ -1,693 +0,0 @@
From 2c58080407554e1bac8fd50d23cb02420524caed Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 12 Aug 2013 12:50:22 +0200
Subject: [PATCH] MIPS: partially inline dma ops
Several DMA ops are no-op on many platforms, and the indirection through
the mips_dma_map_ops function table is causing the compiler to emit
unnecessary code.
Inlining visibly improves network performance in my tests (on a 24Kc
based system), and also slightly reduces code size of a few drivers.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
arch/mips/Kconfig | 4 +
arch/mips/include/asm/dma-mapping.h | 360 +++++++++++++++++++++++++++++++++++-
arch/mips/mm/dma-default.c | 163 ++--------------
3 files changed, 373 insertions(+), 154 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1526,6 +1526,7 @@ config CPU_CAVIUM_OCTEON
select CPU_SUPPORTS_HUGEPAGES
select USB_EHCI_BIG_ENDIAN_MMIO
select MIPS_L1_CACHE_SHIFT_7
+ select SYS_HAS_DMA_OPS
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
@@ -1790,6 +1791,9 @@ config MIPS_MALTA_PM
bool
default y
+config SYS_HAS_DMA_OPS
+ bool
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -1,9 +1,16 @@
#ifndef _ASM_DMA_MAPPING_H
#define _ASM_DMA_MAPPING_H
+#include <linux/kmemcheck.h>
+#include <linux/bug.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+
#include <asm/scatterlist.h>
#include <asm/dma-coherence.h>
#include <asm/cache.h>
+#include <asm/cpu-type.h>
#include <asm-generic/dma-coherent.h>
#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
@@ -12,12 +19,48 @@
extern struct dma_map_ops *mips_dma_map_ops;
+void __dma_sync(struct page *page, unsigned long offset, size_t size,
+ enum dma_data_direction direction);
+void *mips_dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp,
+ struct dma_attrs *attrs);
+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle, struct dma_attrs *attrs);
+
static inline struct dma_map_ops *get_dma_ops(struct device *dev)
{
+#ifdef CONFIG_SYS_HAS_DMA_OPS
if (dev && dev->archdata.dma_ops)
return dev->archdata.dma_ops;
else
return mips_dma_map_ops;
+#else
+ return NULL;
+#endif
+}
+
+/*
+ * Warning on the terminology - Linux calls an uncached area coherent;
+ * MIPS terminology calls memory areas with hardware maintained coherency
+ * coherent.
+ */
+
+static inline int cpu_needs_post_dma_flush(struct device *dev)
+{
+#ifndef CONFIG_SYS_HAS_CPU_R10000
+ return 0;
+#endif
+ return !plat_device_is_coherent(dev) &&
+ (boot_cpu_type() == CPU_R10000 ||
+ boot_cpu_type() == CPU_R12000 ||
+ boot_cpu_type() == CPU_BMIPS5000);
+}
+
+static inline struct page *dma_addr_to_page(struct device *dev,
+ dma_addr_t dma_addr)
+{
+ return pfn_to_page(
+ plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
}
static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
@@ -30,12 +73,304 @@ static inline bool dma_capable(struct de
static inline void dma_mark_clean(void *addr, size_t size) {}
-#include <asm-generic/dma-mapping-common.h>
+static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
+ size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ unsigned long offset = (unsigned long)ptr & ~PAGE_MASK;
+ struct page *page = virt_to_page(ptr);
+ dma_addr_t addr;
+
+ kmemcheck_mark_initialized(ptr, size);
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops) {
+ addr = ops->map_page(dev, page, offset, size, dir, attrs);
+ } else {
+ if (!plat_device_is_coherent(dev))
+ __dma_sync(page, offset, size, dir);
+
+ addr = plat_map_dma_mem_page(dev, page) + offset;
+ }
+ debug_dma_map_page(dev, page, offset, size, dir, addr, true);
+ return addr;
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
+ size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops) {
+ ops->unmap_page(dev, addr, size, dir, attrs);
+ } else {
+ if (cpu_needs_post_dma_flush(dev))
+ __dma_sync(dma_addr_to_page(dev, addr),
+ addr & ~PAGE_MASK, size, dir);
+
+ plat_unmap_dma_mem(dev, addr, size, dir);
+ }
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ int i, ents;
+ struct scatterlist *s;
+
+ for_each_sg(sg, s, nents, i)
+ kmemcheck_mark_initialized(sg_virt(s), s->length);
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops) {
+ ents = ops->map_sg(dev, sg, nents, dir, attrs);
+ } else {
+ for_each_sg(sg, s, nents, i) {
+ struct page *page = sg_page(s);
+
+ if (!plat_device_is_coherent(dev))
+ __dma_sync(page, s->offset, s->length, dir);
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+ s->dma_length = s->length;
+#endif
+ s->dma_address =
+ plat_map_dma_mem_page(dev, page) + s->offset;
+ }
+ ents = nents;
+ }
+ debug_dma_map_sg(dev, sg, nents, ents, dir);
+
+ return ents;
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ struct scatterlist *s;
+ int i;
+
+ BUG_ON(!valid_dma_direction(dir));
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+ if (ops) {
+ ops->unmap_sg(dev, sg, nents, dir, attrs);
+ return;
+ }
+
+ for_each_sg(sg, s, nents, i) {
+ if (!plat_device_is_coherent(dev) && dir != DMA_TO_DEVICE)
+ __dma_sync(sg_page(s), s->offset, s->length, dir);
+ plat_unmap_dma_mem(dev, s->dma_address, s->length, dir);
+ }
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ size_t offset, size_t size,
+ enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ dma_addr_t addr;
+
+ kmemcheck_mark_initialized(page_address(page) + offset, size);
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops) {
+ addr = ops->map_page(dev, page, offset, size, dir, NULL);
+ } else {
+ if (!plat_device_is_coherent(dev))
+ __dma_sync(page, offset, size, dir);
+
+ addr = plat_map_dma_mem_page(dev, page) + offset;
+ }
+ debug_dma_map_page(dev, page, offset, size, dir, addr, false);
+
+ return addr;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops) {
+ ops->unmap_page(dev, addr, size, dir, NULL);
+ } else {
+ if (cpu_needs_post_dma_flush(dev))
+ __dma_sync(dma_addr_to_page(dev, addr),
+ addr & ~PAGE_MASK, size, dir);
+
+ plat_unmap_dma_mem(dev, addr, size, dir);
+ }
+ debug_dma_unmap_page(dev, addr, size, dir, false);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_single_for_cpu(dev, addr, size, dir);
+ else if (cpu_needs_post_dma_flush(dev))
+ __dma_sync(dma_addr_to_page(dev, addr),
+ addr & ~PAGE_MASK, size, dir);
+ debug_dma_sync_single_for_cpu(dev, addr, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t addr, size_t size,
+ enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_single_for_device(dev, addr, size, dir);
+ else if (!plat_device_is_coherent(dev))
+ __dma_sync(dma_addr_to_page(dev, addr),
+ addr & ~PAGE_MASK, size, dir);
+ debug_dma_sync_single_for_device(dev, addr, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t addr,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ const struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_single_for_cpu(dev, addr + offset, size, dir);
+ else if (cpu_needs_post_dma_flush(dev))
+ __dma_sync(dma_addr_to_page(dev, addr + offset),
+ (addr + offset) & ~PAGE_MASK, size, dir);
+ debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t addr,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ const struct dma_map_ops *ops = get_dma_ops(dev);
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_single_for_device(dev, addr + offset, size, dir);
+ else if (!plat_device_is_coherent(dev))
+ __dma_sync(dma_addr_to_page(dev, addr + offset),
+ (addr + offset) & ~PAGE_MASK, size, dir);
+ debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ struct scatterlist *s;
+ int i;
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_sg_for_cpu(dev, sg, nelems, dir);
+ else if (cpu_needs_post_dma_flush(dev)) {
+ for_each_sg(sg, s, nelems, i)
+ __dma_sync(sg_page(s), s->offset, s->length, dir);
+ }
+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ struct scatterlist *s;
+ int i;
+
+ BUG_ON(!valid_dma_direction(dir));
+ if (ops)
+ ops->sync_sg_for_device(dev, sg, nelems, dir);
+ else if (!plat_device_is_coherent(dev)) {
+ for_each_sg(sg, s, nelems, i)
+ __dma_sync(sg_page(s), s->offset, s->length, dir);
+ }
+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
+
+}
+
+#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
+#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL)
+#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL)
+#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL)
+
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+
+/**
+ * dma_mmap_attrs - map a coherent DMA allocation into user space
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @vma: vm_area_struct describing requested user mapping
+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_attrs
+ * @handle: device-view address returned from dma_alloc_attrs
+ * @size: size of memory originally requested in dma_alloc_attrs
+ * @attrs: attributes of mapping properties requested in dma_alloc_attrs
+ *
+ * Map a coherent DMA buffer previously allocated by dma_alloc_attrs
+ * into user space. The coherent DMA buffer must not be freed by the
+ * driver until the user space mapping has been released.
+ */
+static inline int
+dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ BUG_ON(!ops);
+ if (ops && ops->mmap)
+ return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
+ return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL)
+
+int
+dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+
+static inline int
+dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ BUG_ON(!ops);
+ if (ops && ops->get_sgtable)
+ return ops->get_sgtable(dev, sgt, cpu_addr, dma_addr, size,
+ attrs);
+ return dma_common_get_sgtable(dev, sgt, cpu_addr, dma_addr, size);
+}
+
+#define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, NULL)
+
static inline int dma_supported(struct device *dev, u64 mask)
{
struct dma_map_ops *ops = get_dma_ops(dev);
- return ops->dma_supported(dev, mask);
+ if (ops)
+ return ops->dma_supported(dev, mask);
+ return plat_dma_supported(dev, mask);
}
static inline int dma_mapping_error(struct device *dev, u64 mask)
@@ -43,7 +378,9 @@ static inline int dma_mapping_error(stru
struct dma_map_ops *ops = get_dma_ops(dev);
debug_dma_mapping_error(dev, mask);
- return ops->mapping_error(dev, mask);
+ if (ops)
+ return ops->mapping_error(dev, mask);
+ return 0;
}
static inline int
@@ -54,7 +391,7 @@ dma_set_mask(struct device *dev, u64 mas
if(!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
- if (ops->set_dma_mask)
+ if (ops && ops->set_dma_mask)
return ops->set_dma_mask(dev, mask);
*dev->dma_mask = mask;
@@ -74,7 +411,11 @@ static inline void *dma_alloc_attrs(stru
void *ret;
struct dma_map_ops *ops = get_dma_ops(dev);
- ret = ops->alloc(dev, size, dma_handle, gfp, attrs);
+ if (ops)
+ ret = ops->alloc(dev, size, dma_handle, gfp, attrs);
+ else
+ ret = mips_dma_alloc_coherent(dev, size, dma_handle, gfp,
+ attrs);
debug_dma_alloc_coherent(dev, size, *dma_handle, ret);
@@ -89,7 +430,10 @@ static inline void dma_free_attrs(struct
{
struct dma_map_ops *ops = get_dma_ops(dev);
- ops->free(dev, size, vaddr, dma_handle, attrs);
+ if (ops)
+ ops->free(dev, size, vaddr, dma_handle, attrs);
+ else
+ mips_dma_free_coherent(dev, size, vaddr, dma_handle, attrs);
debug_dma_free_coherent(dev, size, vaddr, dma_handle);
}
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -26,7 +26,7 @@
#ifdef CONFIG_DMA_MAYBE_COHERENT
int coherentio = 0; /* User defined DMA coherency from command line. */
-EXPORT_SYMBOL_GPL(coherentio);
+EXPORT_SYMBOL(coherentio);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
@@ -46,35 +46,6 @@ static int __init setnocoherentio(char *
early_param("nocoherentio", setnocoherentio);
#endif
-static inline struct page *dma_addr_to_page(struct device *dev,
- dma_addr_t dma_addr)
-{
- return pfn_to_page(
- plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
-}
-
-/*
- * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
- * speculatively fill random cachelines with stale data at any time,
- * requiring an extra flush post-DMA.
- *
- * Warning on the terminology - Linux calls an uncached area coherent;
- * MIPS terminology calls memory areas with hardware maintained coherency
- * coherent.
- *
- * Note that the R14000 and R16000 should also be checked for in this
- * condition. However this function is only called on non-I/O-coherent
- * systems and only the R10000 and R12000 are used in such systems, the
- * SGI IP28 Indigo² rsp. SGI IP32 aka O2.
- */
-static inline int cpu_needs_post_dma_flush(struct device *dev)
-{
- return !plat_device_is_coherent(dev) &&
- (boot_cpu_type() == CPU_R10000 ||
- boot_cpu_type() == CPU_R12000 ||
- boot_cpu_type() == CPU_BMIPS5000);
-}
-
static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
{
gfp_t dma_flag;
@@ -130,8 +101,9 @@ void *dma_alloc_noncoherent(struct devic
}
EXPORT_SYMBOL(dma_alloc_noncoherent);
-static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, gfp_t gfp, struct dma_attrs *attrs)
+void *mips_dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp,
+ struct dma_attrs *attrs)
{
void *ret;
struct page *page = NULL;
@@ -162,6 +134,7 @@ static void *mips_dma_alloc_coherent(str
return ret;
}
+EXPORT_SYMBOL(mips_dma_alloc_coherent);
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
@@ -172,8 +145,8 @@ void dma_free_noncoherent(struct device
}
EXPORT_SYMBOL(dma_free_noncoherent);
-static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
- dma_addr_t dma_handle, struct dma_attrs *attrs)
+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle, struct dma_attrs *attrs)
{
unsigned long addr = (unsigned long) vaddr;
int order = get_order(size);
@@ -193,6 +166,7 @@ static void mips_dma_free_coherent(struc
if (!dma_release_from_contiguous(dev, page, count))
__free_pages(page, get_order(size));
}
+EXPORT_SYMBOL(mips_dma_free_coherent);
static inline void __dma_sync_virtual(void *addr, size_t size,
enum dma_data_direction direction)
@@ -221,8 +195,8 @@ static inline void __dma_sync_virtual(vo
* If highmem is not configured then the bulk of this loop gets
* optimized out.
*/
-static inline void __dma_sync(struct page *page,
- unsigned long offset, size_t size, enum dma_data_direction direction)
+void __dma_sync(struct page *page, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
{
size_t left = size;
@@ -251,108 +225,7 @@ static inline void __dma_sync(struct pag
left -= len;
} while (left);
}
-
-static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
-{
- if (cpu_needs_post_dma_flush(dev))
- __dma_sync(dma_addr_to_page(dev, dma_addr),
- dma_addr & ~PAGE_MASK, size, direction);
-
- plat_unmap_dma_mem(dev, dma_addr, size, direction);
-}
-
-static int mips_dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
-{
- int i;
-
- for (i = 0; i < nents; i++, sg++) {
- if (!plat_device_is_coherent(dev))
- __dma_sync(sg_page(sg), sg->offset, sg->length,
- direction);
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
- sg->dma_length = sg->length;
-#endif
- sg->dma_address = plat_map_dma_mem_page(dev, sg_page(sg)) +
- sg->offset;
- }
-
- return nents;
-}
-
-static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- if (!plat_device_is_coherent(dev))
- __dma_sync(page, offset, size, direction);
-
- return plat_map_dma_mem_page(dev, page) + offset;
-}
-
-static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- int i;
-
- for (i = 0; i < nhwentries; i++, sg++) {
- if (!plat_device_is_coherent(dev) &&
- direction != DMA_TO_DEVICE)
- __dma_sync(sg_page(sg), sg->offset, sg->length,
- direction);
- plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction);
- }
-}
-
-static void mips_dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
- if (cpu_needs_post_dma_flush(dev))
- __dma_sync(dma_addr_to_page(dev, dma_handle),
- dma_handle & ~PAGE_MASK, size, direction);
-}
-
-static void mips_dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
- if (!plat_device_is_coherent(dev))
- __dma_sync(dma_addr_to_page(dev, dma_handle),
- dma_handle & ~PAGE_MASK, size, direction);
-}
-
-static void mips_dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
-{
- int i;
-
- if (cpu_needs_post_dma_flush(dev))
- for (i = 0; i < nelems; i++, sg++)
- __dma_sync(sg_page(sg), sg->offset, sg->length,
- direction);
-}
-
-static void mips_dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
-{
- int i;
-
- if (!plat_device_is_coherent(dev))
- for (i = 0; i < nelems; i++, sg++)
- __dma_sync(sg_page(sg), sg->offset, sg->length,
- direction);
-}
-
-int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-int mips_dma_supported(struct device *dev, u64 mask)
-{
- return plat_dma_supported(dev, mask);
-}
+EXPORT_SYMBOL(__dma_sync);
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
@@ -365,23 +238,10 @@ void dma_cache_sync(struct device *dev,
EXPORT_SYMBOL(dma_cache_sync);
-static struct dma_map_ops mips_default_dma_map_ops = {
- .alloc = mips_dma_alloc_coherent,
- .free = mips_dma_free_coherent,
- .map_page = mips_dma_map_page,
- .unmap_page = mips_dma_unmap_page,
- .map_sg = mips_dma_map_sg,
- .unmap_sg = mips_dma_unmap_sg,
- .sync_single_for_cpu = mips_dma_sync_single_for_cpu,
- .sync_single_for_device = mips_dma_sync_single_for_device,
- .sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
- .sync_sg_for_device = mips_dma_sync_sg_for_device,
- .mapping_error = mips_dma_mapping_error,
- .dma_supported = mips_dma_supported
-};
-
-struct dma_map_ops *mips_dma_map_ops = &mips_default_dma_map_ops;
+#ifdef CONFIG_SYS_HAS_DMA_OPS
+struct dma_map_ops *mips_dma_map_ops = NULL;
EXPORT_SYMBOL(mips_dma_map_ops);
+#endif
#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)

View File

@ -1,58 +0,0 @@
From 71a0a72456b48de972d7ed613b06a22a3aa9057f Mon Sep 17 00:00:00 2001
From: Yousong Zhou <yszhou4tech@gmail.com>
Date: Sat, 26 Sep 2015 13:41:43 +0800
Subject: [PATCH] MIPS: UAPI: Ignore __arch_swab{16,32,64} when using MIPS16
Some GCC versions (e.g. 4.8.3) can incorrectly inline a function with
MIPS32 instructions into another function with MIPS16 code [1], causing
the assembler to genereate incorrect binary code or fail right away
complaining about unrecognized opcode.
In the case of __arch_swab{16,32}, when inlined by the compiler with
flags `-mips32r2 -mips16 -Os', the assembler can fail with the following
error.
{standard input}:79: Error: unrecognized opcode `wsbh $2,$2'
For performance concerns and to workaround the issue already existing in
older compilers, just ignore these 2 functions when compiling with
mips16 enabled.
[1] Inlining nomips16 function into mips16 function can result in
undefined builtins, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55777
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/uapi/asm/swab.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/mips/include/uapi/asm/swab.h b/arch/mips/include/uapi/asm/swab.h
index 8f2d184..23cd9b1 100644
--- a/arch/mips/include/uapi/asm/swab.h
+++ b/arch/mips/include/uapi/asm/swab.h
@@ -13,8 +13,9 @@
#define __SWAB_64_THRU_32__
-#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
- defined(_MIPS_ARCH_LOONGSON3A)
+#if !defined(__mips16) && \
+ ((defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
+ defined(_MIPS_ARCH_LOONGSON3A))
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
@@ -65,5 +66,5 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
}
#define __arch_swab64 __arch_swab64
#endif /* __mips64 */
-#endif /* MIPS R2 or newer or Loongson 3A */
+#endif /* (not __mips16) and (MIPS R2 or newer or Loongson 3A) */
#endif /* _ASM_SWAB_H */
--
1.7.10.4

View File

@ -1,148 +0,0 @@
Patch by: Miklos Szeredi <miklos@szeredi.hu>
Some filesystems (e.g. jffs2) lock the same resources for both readdir
and lookup, leading to a deadlock in ovl_cache_entry_new, which is called
from the filldir, and calls lookup itself.
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -23,6 +23,7 @@ struct ovl_cache_entry {
u64 ino;
struct list_head l_node;
struct rb_node node;
+ struct ovl_cache_entry *next_maybe_whiteout;
bool is_whiteout;
char name[];
};
@@ -39,7 +40,7 @@ struct ovl_readdir_data {
struct rb_root root;
struct list_head *list;
struct list_head middle;
- struct dentry *dir;
+ struct ovl_cache_entry *first_maybe_whiteout;
int count;
int err;
};
@@ -79,7 +80,7 @@ static struct ovl_cache_entry *ovl_cache
return NULL;
}
-static struct ovl_cache_entry *ovl_cache_entry_new(struct dentry *dir,
+static struct ovl_cache_entry *ovl_cache_entry_new(struct ovl_readdir_data *rdd,
const char *name, int len,
u64 ino, unsigned int d_type)
{
@@ -98,29 +99,8 @@ static struct ovl_cache_entry *ovl_cache
p->is_whiteout = false;
if (d_type == DT_CHR) {
- struct dentry *dentry;
- const struct cred *old_cred;
- struct cred *override_cred;
-
- override_cred = prepare_creds();
- if (!override_cred) {
- kfree(p);
- return NULL;
- }
-
- /*
- * CAP_DAC_OVERRIDE for lookup
- */
- cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
- old_cred = override_creds(override_cred);
-
- dentry = lookup_one_len(name, dir, len);
- if (!IS_ERR(dentry)) {
- p->is_whiteout = ovl_is_whiteout(dentry);
- dput(dentry);
- }
- revert_creds(old_cred);
- put_cred(override_cred);
+ p->next_maybe_whiteout = rdd->first_maybe_whiteout;
+ rdd->first_maybe_whiteout = p;
}
return p;
}
@@ -148,7 +128,7 @@ static int ovl_cache_entry_add_rb(struct
return 0;
}
- p = ovl_cache_entry_new(rdd->dir, name, len, ino, d_type);
+ p = ovl_cache_entry_new(rdd, name, len, ino, d_type);
if (p == NULL)
return -ENOMEM;
@@ -169,7 +149,7 @@ static int ovl_fill_lower(struct ovl_rea
if (p) {
list_move_tail(&p->l_node, &rdd->middle);
} else {
- p = ovl_cache_entry_new(rdd->dir, name, namelen, ino, d_type);
+ p = ovl_cache_entry_new(rdd, name, namelen, ino, d_type);
if (p == NULL)
rdd->err = -ENOMEM;
else
@@ -219,6 +199,43 @@ static int ovl_fill_merge(struct dir_con
return ovl_fill_lower(rdd, name, namelen, offset, ino, d_type);
}
+static int ovl_check_whiteouts(struct dentry *dir, struct ovl_readdir_data *rdd)
+{
+ int err = 0;
+
+ mutex_lock(&dir->d_inode->i_mutex);
+ while (rdd->first_maybe_whiteout) {
+ struct dentry *dentry;
+ const struct cred *old_cred;
+ struct cred *override_cred;
+ struct ovl_cache_entry *p = rdd->first_maybe_whiteout;
+
+ rdd->first_maybe_whiteout = p->next_maybe_whiteout;
+
+ override_cred = prepare_creds();
+ if (!override_cred) {
+ err = -ENOMEM;
+ break;
+ }
+ /*
+ * CAP_DAC_OVERRIDE for lookup
+ */
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ old_cred = override_creds(override_cred);
+
+ dentry = lookup_one_len(p->name, dir, p->len);
+ if (!IS_ERR(dentry)) {
+ p->is_whiteout = ovl_is_whiteout(dentry);
+ dput(dentry);
+ }
+ revert_creds(old_cred);
+ put_cred(override_cred);
+ }
+ mutex_unlock(&dir->d_inode->i_mutex);
+
+ return err;
+}
+
static inline int ovl_dir_read(struct path *realpath,
struct ovl_readdir_data *rdd)
{
@@ -229,7 +246,7 @@ static inline int ovl_dir_read(struct pa
if (IS_ERR(realfile))
return PTR_ERR(realfile);
- rdd->dir = realpath->dentry;
+ rdd->first_maybe_whiteout = NULL;
rdd->ctx.pos = 0;
do {
rdd->count = 0;
@@ -238,6 +255,10 @@ static inline int ovl_dir_read(struct pa
if (err >= 0)
err = rdd->err;
} while (!err && rdd->count);
+
+ if (!err && rdd->first_maybe_whiteout)
+ err = ovl_check_whiteouts(realpath->dentry, rdd);
+
fput(realfile);
return err;

View File

@ -1,41 +0,0 @@
From 9612e686b235dc9e33c8dfb5e6d2ff2b2140fb9d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 16 Jun 2015 21:01:30 +0200
Subject: [PATCH V2] usb: xhci: make USB_XHCI_PLATFORM selectable
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Right now xhci-plat-hcd can be built when using one of platform specific
drivers only (mvebu/rcar). There shouldn't be such limitation as some
platforms may not require any quirks and may want to just use a generic
driver ("generic-xhci" / "xhci-hcd").
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
Greg/Mathias: I'm not sure if it's more like USB subsystem stuff or xHCI
Could you decide which one of you could pick that, please?
V2: Drop useless "default n", thanks Sergei :)
---
drivers/usb/host/Kconfig | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -32,7 +32,14 @@ config USB_XHCI_PCI
default y
config USB_XHCI_PLATFORM
- tristate
+ tristate "Generic xHCI driver for a platform device"
+ ---help---
+ Adds an xHCI host driver for a generic platform device, which
+ provides a memory space and an irq.
+ It is also a prerequisite for platform specific drivers that
+ implement some extra quirks.
+
+ If unsure, say N.
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"

View File

@ -1,228 +0,0 @@
From 4a0e3e989d66bb7204b163d9cfaa7fa96d0f2023 Mon Sep 17 00:00:00 2001
From: Enrico Mioso <mrkiko.rs@gmail.com>
Date: Wed, 8 Jul 2015 13:05:57 +0200
Subject: [PATCH] cdc_ncm: Add support for moving NDP to end of NCM frame
NCM specs are not actually mandating a specific position in the frame for
the NDP (Network Datagram Pointer). However, some Huawei devices will
ignore our aggregates if it is not placed after the datagrams it points
to. Add support for doing just this, in a per-device configurable way.
While at it, update NCM subdrivers, disabling this functionality in all of
them, except in huawei_cdc_ncm where it is enabled instead.
We aren't making any distinction between different Huawei NCM devices,
based on what the vendor driver does. Standard NCM devices are left
unaffected: if they are compliant, they should be always usable, still
stay on the safe side.
This change has been tested and working with a Huawei E3131 device (which
works regardless of NDP position), a Huawei E3531 (also working both
ways) and an E3372 (which mandates NDP to be after indexed datagrams).
V1->V2:
- corrected wrong NDP acronym definition
- fixed possible NULL pointer dereference
- patch cleanup
V2->V3:
- Properly account for the NDP size when writing new packets to SKB
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/usb/cdc_mbim.c | 2 +-
drivers/net/usb/cdc_ncm.c | 61 ++++++++++++++++++++++++++++++++++++----
drivers/net/usb/huawei_cdc_ncm.c | 7 +++--
include/linux/usb/cdc_ncm.h | 7 ++++-
4 files changed, 67 insertions(+), 10 deletions(-)
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -158,7 +158,7 @@ static int cdc_mbim_bind(struct usbnet *
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
- ret = cdc_ncm_bind_common(dev, intf, data_altsetting);
+ ret = cdc_ncm_bind_common(dev, intf, data_altsetting, 0);
if (ret)
goto err;
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -684,10 +684,12 @@ static void cdc_ncm_free(struct cdc_ncm_
ctx->tx_curr_skb = NULL;
}
+ kfree(ctx->delayed_ndp16);
+
kfree(ctx);
}
-int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting)
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
{
const struct usb_cdc_union_desc *union_desc = NULL;
struct cdc_ncm_ctx *ctx;
@@ -855,6 +857,17 @@ advance:
/* finish setting up the device specific data */
cdc_ncm_setup(dev);
+ /* Device-specific flags */
+ ctx->drvflags = drvflags;
+
+ /* Allocate the delayed NDP if needed. */
+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+ ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+ if (!ctx->delayed_ndp16)
+ goto error2;
+ dev_info(&intf->dev, "NDP will be placed at end of frame for this device.");
+ }
+
/* override ethtool_ops */
dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
@@ -954,8 +967,11 @@ static int cdc_ncm_bind(struct usbnet *d
if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM)
return -ENODEV;
- /* The NCM data altsetting is fixed */
- ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM);
+ /* The NCM data altsetting is fixed, so we hard-coded it.
+ * Additionally, generic NCM devices are assumed to accept arbitrarily
+ * placed NDP.
+ */
+ ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);
/*
* We should get an event when network connection is "connected" or
@@ -986,6 +1002,14 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
struct usb_cdc_ncm_nth16 *nth16 = (void *)skb->data;
size_t ndpoffset = le16_to_cpu(nth16->wNdpIndex);
+ /* If NDP should be moved to the end of the NCM package, we can't follow the
+ * NTH16 header as we would normally do. NDP isn't written to the SKB yet, and
+ * the wNdpIndex field in the header is actually not consistent with reality. It will be later.
+ */
+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
+ if (ctx->delayed_ndp16->dwSignature == sign)
+ return ctx->delayed_ndp16;
+
/* follow the chain of NDPs, looking for a match */
while (ndpoffset) {
ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb->data + ndpoffset);
@@ -995,7 +1019,8 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
}
/* align new NDP */
- cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);
+ if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+ cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);
/* verify that there is room for the NDP and the datagram (reserve) */
if ((ctx->tx_max - skb->len - reserve) < ctx->max_ndp_size)
@@ -1008,7 +1033,11 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
nth16->wNdpIndex = cpu_to_le16(skb->len);
/* push a new empty NDP */
- ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
+ if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+ ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
+ else
+ ndp16 = ctx->delayed_ndp16;
+
ndp16->dwSignature = sign;
ndp16->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp16) + sizeof(struct usb_cdc_ncm_dpe16));
return ndp16;
@@ -1023,6 +1052,15 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
struct sk_buff *skb_out;
u16 n = 0, index, ndplen;
u8 ready2send = 0;
+ u32 delayed_ndp_size;
+
+ /* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated
+ * accordingly. Otherwise, we should check here.
+ */
+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
+ delayed_ndp_size = ctx->max_ndp_size;
+ else
+ delayed_ndp_size = 0;
/* if there is a remaining skb, it gets priority */
if (skb != NULL) {
@@ -1077,7 +1115,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
cdc_ncm_align_tail(skb_out, ctx->tx_modulus, ctx->tx_remainder, ctx->tx_max);
/* check if we had enough room left for both NDP and frame */
- if (!ndp16 || skb_out->len + skb->len > ctx->tx_max) {
+ if (!ndp16 || skb_out->len + skb->len + delayed_ndp_size > ctx->tx_max) {
if (n == 0) {
/* won't fit, MTU problem? */
dev_kfree_skb_any(skb);
@@ -1150,6 +1188,17 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
/* variables will be reset at next call */
}
+ /* If requested, put NDP at end of frame. */
+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+ nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
+ cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_max);
+ nth16->wNdpIndex = cpu_to_le16(skb_out->len);
+ memcpy(skb_put(skb_out, ctx->max_ndp_size), ctx->delayed_ndp16, ctx->max_ndp_size);
+
+ /* Zero out delayed NDP - signature checking will naturally fail. */
+ ndp16 = memset(ctx->delayed_ndp16, 0, ctx->max_ndp_size);
+ }
+
/* If collected data size is less or equal ctx->min_tx_pkt
* bytes, we send buffers as it is. If we get more data, it
* would be more efficient for USB HS mobile device with DMA
--- a/drivers/net/usb/huawei_cdc_ncm.c
+++ b/drivers/net/usb/huawei_cdc_ncm.c
@@ -73,11 +73,14 @@ static int huawei_cdc_ncm_bind(struct us
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+ int drvflags = 0;
/* altsetting should always be 1 for NCM devices - so we hard-coded
- * it here
+ * it here. Some huawei devices will need the NDP part of the NCM package to
+ * be at the end of the frame.
*/
- ret = cdc_ncm_bind_common(usbnet_dev, intf, 1);
+ drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+ ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
if (ret)
goto err;
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -80,6 +80,9 @@
#define CDC_NCM_TIMER_INTERVAL_MIN 5UL
#define CDC_NCM_TIMER_INTERVAL_MAX (U32_MAX / NSEC_PER_USEC)
+/* Driver flags */
+#define CDC_NCM_FLAG_NDP_TO_END 0x02 /* NDP is placed at end of frame */
+
#define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
(x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
@@ -103,9 +106,11 @@ struct cdc_ncm_ctx {
spinlock_t mtx;
atomic_t stop;
+ int drvflags;
u32 timer_interval;
u32 max_ndp_size;
+ struct usb_cdc_ncm_ndp16 *delayed_ndp16;
u32 tx_timer_pending;
u32 tx_curr_frame_num;
@@ -133,7 +138,7 @@ struct cdc_ncm_ctx {
};
u8 cdc_ncm_select_altsetting(struct usb_interface *intf);
-int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags);
void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);
int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in);

View File

@ -1,35 +0,0 @@
From a95f03e51471dbdbafd3391991d867ac2358ed02 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 23 Aug 2015 14:23:29 +0200
Subject: [PATCH] usb: ehci-orion: fix probe for !GENERIC_PHY
Commit d445913ce0ab7f ("usb: ehci-orion: add optional PHY support")
added support for optional phys, but devm_phy_optional_get returns
-ENOSYS if GENERIC_PHY is not enabled.
This causes probe failures, even when there are no phys specified:
[ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38
[ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38
Similar to dwc3, treat -ENOSYS as no phy.
Fixes: d445913ce0ab7f ("usb: ehci-orion: add optional PHY support")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
drivers/usb/host/ehci-orion.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -218,7 +218,8 @@ static int ehci_orion_drv_probe(struct p
priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
- goto err_phy_get;
+ if (err != -ENOSYS)
+ goto err_phy_get;
} else {
err = phy_init(priv->phy);
if (err)

View File

@ -1,11 +0,0 @@
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -165,7 +165,7 @@ else
# annotated or signed tagged state (as git describe only
# looks at signed or annotated tags - git tag -a/-s) and
# LOCALVERSION= is not specified
- if test "${LOCALVERSION+set}" != "set"; then
+ if test "${CONFIG_LOCALVERSION+set}" != "set"; then
scm=$(scm_version --short)
res="$res${scm:++}"
fi

View File

@ -1,14 +0,0 @@
--- a/Makefile
+++ b/Makefile
@@ -614,9 +614,9 @@ include $(srctree)/arch/$(SRCARCH)/Makef
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
+KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION) $(call cc-disable-warning,maybe-uninitialized,)
else
-KBUILD_CFLAGS += -O2
+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
endif
# Tell gcc to never replace conditional load with a non-conditional one

View File

@ -1,11 +0,0 @@
--- a/Makefile
+++ b/Makefile
@@ -410,7 +410,7 @@ KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
-KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)

View File

@ -1,108 +0,0 @@
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -58,6 +58,7 @@ static struct addr_range percpu_range =
static struct sym_entry *table;
static unsigned int table_size, table_cnt;
static int all_symbols = 0;
+static int uncompressed = 0;
static int absolute_percpu = 0;
static char symbol_prefix_char = '\0';
static unsigned long long kernel_start_addr = 0;
@@ -392,6 +393,9 @@ static void write_src(void)
free(markers);
+ if (uncompressed)
+ return;
+
output_label("kallsyms_token_table");
off = 0;
for (i = 0; i < 256; i++) {
@@ -450,6 +454,9 @@ static void *find_token(unsigned char *s
{
int i;
+ if (uncompressed)
+ return NULL;
+
for (i = 0; i < len - 1; i++) {
if (str[i] == token[0] && str[i+1] == token[1])
return &str[i];
@@ -522,6 +529,9 @@ static void optimize_result(void)
{
int i, best;
+ if (uncompressed)
+ return;
+
/* using the '\0' symbol last allows compress_symbols to use standard
* fast string functions */
for (i = 255; i >= 0; i--) {
@@ -692,7 +702,9 @@ int main(int argc, char **argv)
} else if (strncmp(argv[i], "--page-offset=", 14) == 0) {
const char *p = &argv[i][14];
kernel_start_addr = strtoull(p, NULL, 16);
- } else
+ } else if (strcmp(argv[i], "--uncompressed") == 0)
+ uncompressed = 1;
+ else
usage();
}
} else if (argc != 1)
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1324,6 +1324,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
the unaligned access emulation.
see arch/parisc/kernel/unaligned.c for reference
+config KALLSYMS_UNCOMPRESSED
+ bool "Keep kallsyms uncompressed"
+ depends on KALLSYMS
+ help
+ Normally kallsyms contains compressed symbols (using a token table),
+ reducing the uncompressed kernel image size. Keeping the symbol table
+ uncompressed significantly improves the size of this part in compressed
+ kernel images.
+
+ Say N unless you need compressed kernel images to be small.
+
config HAVE_PCSPKR_PLATFORM
bool
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -90,6 +90,10 @@ kallsyms()
kallsymopt="${kallsymopt} --absolute-percpu"
fi
+ if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
+ kallsymopt="${kallsymopt} --uncompressed"
+ fi
+
local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -109,6 +109,11 @@ static unsigned int kallsyms_expand_symb
* For every byte on the compressed symbol data, copy the table
* entry for that byte.
*/
+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
+ memcpy(result, data + 1, len - 1);
+ result += len - 1;
+ len = 0;
+#endif
while (len) {
tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
data++;
@@ -141,6 +146,9 @@ tail:
*/
static char kallsyms_get_symbol_type(unsigned int off)
{
+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
+ return kallsyms_names[off + 1];
+#endif
/*
* Get just the first code, look it up in the token table,
* and return the first char from this token.

View File

@ -1,194 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Subject: [PATCH] build: add a hack for removing non-essential module info
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -84,9 +84,10 @@ void trim_init_extable(struct module *m)
/* Generic info of form tag = "info" */
#define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
/* For userspace: you can also call me... */
-#define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
+#define MODULE_ALIAS(_alias) MODULE_INFO_STRIP(alias, _alias)
/* Soft module dependencies. See man modprobe.d for details.
* Example: MODULE_SOFTDEP("pre: module-foo module-bar post: module-baz")
@@ -127,12 +128,12 @@ void trim_init_extable(struct module *m)
* Author(s), use "Name <email>" or just "Name", for multiple
* authors use multiple MODULE_AUTHOR() statements/lines.
*/
-#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
/* What your module does. */
-#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
-#ifdef MODULE
+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
/* Creates an alias so file2alias.c can find device table. */
#define MODULE_DEVICE_TABLE(type, name) \
extern const typeof(name) __mod_##type##__##name##_device_table \
@@ -159,7 +160,9 @@ extern const typeof(name) __mod_##type##
*/
#if defined(MODULE) || !defined(CONFIG_SYSFS)
-#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
+#elif defined(CONFIG_MODULE_STRIPPED)
+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
#else
#define MODULE_VERSION(_version) \
static struct module_version_attribute ___modver_attr = { \
@@ -181,7 +184,7 @@ extern const typeof(name) __mod_##type##
/* Optional firmware file (or files) needed by the module
* format is simply firmware file name. Multiple firmware
* files require multiple MODULE_FIRMWARE() specifiers */
-#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
/* Given an address, look for it in the exception tables */
const struct exception_table_entry *search_exception_tables(unsigned long add);
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -16,6 +16,16 @@
/* Chosen so that structs with an unsigned long line up. */
#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
+/* This struct is here for syntactic coherency, it is not used */
+#define __MODULE_INFO_DISABLED(name) \
+ struct __UNIQUE_ID(name) {}
+
+#ifdef CONFIG_MODULE_STRIPPED
+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
+#else
+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
+#endif
+
#ifdef MODULE
#define __MODULE_INFO(tag, name, info) \
static const char __UNIQUE_ID(name)[] \
@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[]
= __stringify(tag) "=" info
#else /* !MODULE */
/* This struct is here for syntactic coherency, it is not used */
-#define __MODULE_INFO(tag, name, info) \
- struct __UNIQUE_ID(name) {}
+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
#endif
#define __MODULE_PARM_TYPE(name, _type) \
__MODULE_INFO(parmtype, name##type, #name ":" _type)
@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
/* One for each parameter, describing how to use it. Some files do
multiple of these per line, so can't just use MODULE_INFO. */
#define MODULE_PARM_DESC(_parm, desc) \
- __MODULE_INFO(parm, _parm, #_parm ":" desc)
+ __MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
struct kernel_param;
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1974,6 +1974,13 @@ config MODULE_COMPRESS_XZ
endchoice
+config MODULE_STRIPPED
+ bool "Reduce module size"
+ depends on MODULES
+ help
+ Remove module parameter descriptions, author info, version, aliases,
+ device tables, etc.
+
endif # MODULES
config INIT_ALL_POSSIBLE
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2680,6 +2680,7 @@ static struct module *setup_load_info(st
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
+#ifndef CONFIG_MODULE_STRIPPED
const char *modmagic = get_modinfo(info, "vermagic");
int err;
@@ -2705,6 +2706,7 @@ static int check_modinfo(struct module *
pr_warn("%s: module is from the staging directory, the quality "
"is unknown, you have been warned.\n", mod->name);
}
+#endif
/* Set up license info based on the info section */
set_license(mod, get_modinfo(info, "license"));
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1726,7 +1726,9 @@ static void read_symbols(char *modname)
symname = remove_dot(info.strtab + sym->st_name);
handle_modversions(mod, &info, sym, symname);
+#ifndef CONFIG_MODULE_STRIPPED
handle_moddevtable(mod, &info, sym, symname);
+#endif
}
if (!is_vmlinux(modname) ||
(is_vmlinux(modname) && vmlinux_section_warnings))
@@ -1870,7 +1872,9 @@ static void add_header(struct buffer *b,
buf_printf(b, "#include <linux/vermagic.h>\n");
buf_printf(b, "#include <linux/compiler.h>\n");
buf_printf(b, "\n");
+#ifndef CONFIG_MODULE_STRIPPED
buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
+#endif
buf_printf(b, "\n");
buf_printf(b, "__visible struct module __this_module\n");
buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
@@ -1887,16 +1891,20 @@ static void add_header(struct buffer *b,
static void add_intree_flag(struct buffer *b, int is_intree)
{
+#ifndef CONFIG_MODULE_STRIPPED
if (is_intree)
buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
+#endif
}
static void add_staging_flag(struct buffer *b, const char *name)
{
+#ifndef CONFIG_MODULE_STRIPPED
static const char *staging_dir = "drivers/staging";
if (strncmp(staging_dir, name, strlen(staging_dir)) == 0)
buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
+#endif
}
/**
@@ -1989,11 +1997,13 @@ static void add_depends(struct buffer *b
static void add_srcversion(struct buffer *b, struct module *mod)
{
+#ifndef CONFIG_MODULE_STRIPPED
if (mod->srcversion[0]) {
buf_printf(b, "\n");
buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
mod->srcversion);
}
+#endif
}
static void write_if_changed(struct buffer *b, const char *fname)
@@ -2224,7 +2234,9 @@ int main(int argc, char **argv)
add_staging_flag(&buf, mod->name);
err |= add_versions(&buf, mod);
add_depends(&buf, mod, modules);
+#ifndef CONFIG_MODULE_STRIPPED
add_moddevtable(&buf, mod);
+#endif
add_srcversion(&buf, mod);
sprintf(fname, "%s.mod.c", mod->name);

View File

@ -1,36 +0,0 @@
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -615,8 +615,10 @@ char *symbol_string(char *buf, char *end
struct printf_spec spec, const char *fmt)
{
unsigned long value;
-#ifdef CONFIG_KALLSYMS
char sym[KSYM_SYMBOL_LEN];
+#ifndef CONFIG_KALLSYMS
+ struct module *mod;
+ int len;
#endif
if (fmt[1] == 'R')
@@ -630,15 +632,15 @@ char *symbol_string(char *buf, char *end
sprint_symbol(sym, value);
else
sprint_symbol_no_offset(sym, value);
-
- return string(buf, end, sym, spec);
#else
- spec.field_width = 2 * sizeof(void *);
- spec.flags |= SPECIAL | SMALL | ZEROPAD;
- spec.base = 16;
+ len = snprintf(sym, sizeof(sym), "0x%lx", value);
- return number(buf, end, value, spec);
+ mod = __module_address(value);
+ if (mod)
+ snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
+ mod->name, mod->module_core, mod->core_size);
#endif
+ return string(buf, end, sym, spec);
}
static noinline_for_stack

View File

@ -1,51 +0,0 @@
--- a/tools/include/tools/be_byteshift.h
+++ b/tools/include/tools/be_byteshift.h
@@ -1,6 +1,10 @@
#ifndef _TOOLS_BE_BYTESHIFT_H
#define _TOOLS_BE_BYTESHIFT_H
+#ifndef __linux__
+#include "linux_types.h"
+#endif
+
#include <stdint.h>
static inline uint16_t __get_unaligned_be16(const uint8_t *p)
--- a/tools/include/tools/le_byteshift.h
+++ b/tools/include/tools/le_byteshift.h
@@ -1,6 +1,10 @@
#ifndef _TOOLS_LE_BYTESHIFT_H
#define _TOOLS_LE_BYTESHIFT_H
+#ifndef __linux__
+#include "linux_types.h"
+#endif
+
#include <stdint.h>
static inline uint16_t __get_unaligned_le16(const uint8_t *p)
--- /dev/null
+++ b/tools/include/tools/linux_types.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_TYPES_H
+#define __LINUX_TYPES_H
+
+#include <stdint.h>
+
+typedef uint8_t __u8;
+typedef uint8_t __be8;
+typedef uint8_t __le8;
+
+typedef uint16_t __u16;
+typedef uint16_t __be16;
+typedef uint16_t __le16;
+
+typedef uint32_t __u32;
+typedef uint32_t __be32;
+typedef uint32_t __le32;
+
+typedef uint64_t __u64;
+typedef uint64_t __be64;
+typedef uint64_t __le64;
+
+#endif

View File

@ -1,11 +0,0 @@
--- a/include/uapi/linux/spi/spidev.h
+++ b/include/uapi/linux/spi/spidev.h
@@ -111,7 +111,7 @@ struct spi_ioc_transfer {
/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
#define SPI_MSGSIZE(N) \
- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
+ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])

View File

@ -1,532 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
use -ffunction-sections, -fdata-sections and --gc-sections
In combination with kernel symbol export stripping this significantly reduces
the kernel image size. Used on both ARM and MIPS architectures.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -89,10 +89,14 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
#
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += -msoft-float
-LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
+endif
+
#
# pass -msoft-float to GAS if it supports it. However on newer binutils
# (specifically newer than 2.24.51.20140728) we then also need to explicitly
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -67,7 +67,7 @@ SECTIONS
/* Exception table for data bus errors */
__dbe_table : {
__start___dbe_table = .;
- *(__dbe_table)
+ KEEP(*(__dbe_table))
__stop___dbe_table = .;
}
@@ -112,7 +112,7 @@ SECTIONS
. = ALIGN(4);
.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
__mips_machines_start = .;
- *(.mips.machines.init)
+ KEEP(*(.mips.machines.init))
__mips_machines_end = .;
}
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -89,7 +89,7 @@
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
#define MCOUNT_REC() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_mcount_loc) = .; \
- *(__mcount_loc) \
+ KEEP(*(__mcount_loc)) \
VMLINUX_SYMBOL(__stop_mcount_loc) = .;
#else
#define MCOUNT_REC()
@@ -97,7 +97,7 @@
#ifdef CONFIG_TRACE_BRANCH_PROFILING
#define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
- *(_ftrace_annotated_branch) \
+ KEEP(*(_ftrace_annotated_branch)) \
VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
#else
#define LIKELY_PROFILE()
@@ -105,7 +105,7 @@
#ifdef CONFIG_PROFILE_ALL_BRANCHES
#define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
- *(_ftrace_branch) \
+ KEEP(*(_ftrace_branch)) \
VMLINUX_SYMBOL(__stop_branch_profile) = .;
#else
#define BRANCH_PROFILE()
@@ -114,7 +114,7 @@
#ifdef CONFIG_KPROBES
#define KPROBE_BLACKLIST() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \
- *(_kprobe_blacklist) \
+ KEEP(*(_kprobe_blacklist)) \
VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .;
#else
#define KPROBE_BLACKLIST()
@@ -123,7 +123,7 @@
#ifdef CONFIG_EVENT_TRACING
#define FTRACE_EVENTS() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_ftrace_events) = .; \
- *(_ftrace_events) \
+ KEEP(*(_ftrace_events)) \
VMLINUX_SYMBOL(__stop_ftrace_events) = .;
#else
#define FTRACE_EVENTS()
@@ -131,7 +131,7 @@
#ifdef CONFIG_TRACING
#define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
- *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
+ KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
#define TRACEPOINT_STR() VMLINUX_SYMBOL(__start___tracepoint_str) = .; \
*(__tracepoint_str) /* Trace_printk fmt' pointer */ \
@@ -144,7 +144,7 @@
#ifdef CONFIG_FTRACE_SYSCALLS
#define TRACE_SYSCALLS() . = ALIGN(8); \
VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
- *(__syscalls_metadata) \
+ KEEP(*(__syscalls_metadata)) \
VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
#else
#define TRACE_SYSCALLS()
@@ -158,8 +158,8 @@
#define _OF_TABLE_1(name) \
. = ALIGN(8); \
VMLINUX_SYMBOL(__##name##_of_table) = .; \
- *(__##name##_of_table) \
- *(__##name##_of_table_end)
+ KEEP(*(__##name##_of_table)) \
+ KEEP(*(__##name##_of_table_end))
#define CLKSRC_OF_TABLES() OF_TABLE(CONFIG_CLKSRC_OF, clksrc)
#define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
@@ -172,7 +172,7 @@
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__dtb_start) = .; \
- *(.dtb.init.rodata) \
+ KEEP(*(.dtb.init.rodata)) \
VMLINUX_SYMBOL(__dtb_end) = .;
/* .data section */
@@ -188,16 +188,17 @@
/* implement dynamic printk debug */ \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___jump_table) = .; \
- *(__jump_table) \
+ KEEP(*(__jump_table)) \
VMLINUX_SYMBOL(__stop___jump_table) = .; \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___verbose) = .; \
- *(__verbose) \
+ KEEP(*(__verbose)) \
VMLINUX_SYMBOL(__stop___verbose) = .; \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
- TRACEPOINT_STR()
+ TRACEPOINT_STR() \
+ *(.data.[a-zA-Z_]*)
/*
* Data section helpers
@@ -251,35 +252,35 @@
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
- *(.pci_fixup_early) \
+ KEEP(*(.pci_fixup_early)) \
VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
- *(.pci_fixup_header) \
+ KEEP(*(.pci_fixup_header)) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
- *(.pci_fixup_final) \
+ KEEP(*(.pci_fixup_final)) \
VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
- *(.pci_fixup_enable) \
+ KEEP(*(.pci_fixup_enable)) \
VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
- *(.pci_fixup_resume) \
+ KEEP(*(.pci_fixup_resume)) \
VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
- *(.pci_fixup_resume_early) \
+ KEEP(*(.pci_fixup_resume_early)) \
VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
- *(.pci_fixup_suspend) \
+ KEEP(*(.pci_fixup_suspend)) \
VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .; \
- *(.pci_fixup_suspend_late) \
+ KEEP(*(.pci_fixup_suspend_late)) \
VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \
} \
\
/* Built-in firmware blobs */ \
.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_builtin_fw) = .; \
- *(.builtin_fw) \
+ KEEP(*(.builtin_fw)) \
VMLINUX_SYMBOL(__end_builtin_fw) = .; \
} \
\
@@ -288,49 +289,49 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
- *(SORT(___ksymtab+*)) \
+ KEEP(*(SORT(___ksymtab+*))) \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
- *(SORT(___ksymtab_gpl+*)) \
+ KEEP(*(SORT(___ksymtab_gpl+*))) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
- *(SORT(___ksymtab_unused+*)) \
+ KEEP(*(SORT(___ksymtab_unused+*))) \
VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
- *(SORT(___ksymtab_unused_gpl+*)) \
+ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \
VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
- *(SORT(___ksymtab_gpl_future+*)) \
+ KEEP(*(SORT(___ksymtab_gpl_future+*))) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
} \
\
/* Kernel symbol table: Normal symbols */ \
__kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab) = .; \
- *(SORT(___kcrctab+*)) \
+ KEEP(*(SORT(___kcrctab+*))) \
VMLINUX_SYMBOL(__stop___kcrctab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
- *(SORT(___kcrctab_gpl+*)) \
+ KEEP(*(SORT(___kcrctab_gpl+*))) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
} \
\
@@ -344,14 +345,14 @@
/* Kernel symbol table: GPL-only unused symbols */ \
__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
- *(SORT(___kcrctab_unused_gpl+*)) \
+ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \
VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
- *(SORT(___kcrctab_gpl_future+*)) \
+ KEEP(*(SORT(___kcrctab_gpl_future+*))) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
} \
\
@@ -370,14 +371,14 @@
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___param) = .; \
- *(__param) \
+ KEEP(*(__param)) \
VMLINUX_SYMBOL(__stop___param) = .; \
} \
\
/* Built-in module versions. */ \
__modver : AT(ADDR(__modver) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___modver) = .; \
- *(__modver) \
+ KEEP(*(__modver)) \
VMLINUX_SYMBOL(__stop___modver) = .; \
. = ALIGN((align)); \
VMLINUX_SYMBOL(__end_rodata) = .; \
@@ -433,7 +434,7 @@
#define ENTRY_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__entry_text_start) = .; \
- *(.entry.text) \
+ KEEP(*(.entry.text)) \
VMLINUX_SYMBOL(__entry_text_end) = .;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -461,7 +462,7 @@
. = ALIGN(align); \
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ex_table) = .; \
- *(__ex_table) \
+ KEEP(*(__ex_table)) \
VMLINUX_SYMBOL(__stop___ex_table) = .; \
}
@@ -477,9 +478,9 @@
#ifdef CONFIG_CONSTRUCTORS
#define KERNEL_CTORS() . = ALIGN(8); \
VMLINUX_SYMBOL(__ctors_start) = .; \
- *(.ctors) \
+ KEEP(*(.ctors)) \
*(SORT(.init_array.*)) \
- *(.init_array) \
+ KEEP(*(.init_array)) \
VMLINUX_SYMBOL(__ctors_end) = .;
#else
#define KERNEL_CTORS()
@@ -528,7 +529,7 @@
#define SBSS(sbss_align) \
. = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
- *(.sbss) \
+ *(.sbss .sbss.*) \
*(.scommon) \
}
@@ -546,7 +547,7 @@
BSS_FIRST_SECTIONS \
*(.bss..page_aligned) \
*(.dynbss) \
- *(.bss) \
+ *(.bss .bss.*) \
*(COMMON) \
}
@@ -595,7 +596,7 @@
. = ALIGN(8); \
__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___bug_table) = .; \
- *(__bug_table) \
+ KEEP(*(__bug_table)) \
VMLINUX_SYMBOL(__stop___bug_table) = .; \
}
#else
@@ -607,7 +608,7 @@
. = ALIGN(4); \
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__tracedata_start) = .; \
- *(.tracedata) \
+ KEEP(*(.tracedata)) \
VMLINUX_SYMBOL(__tracedata_end) = .; \
}
#else
@@ -624,17 +625,17 @@
#define INIT_SETUP(initsetup_align) \
. = ALIGN(initsetup_align); \
VMLINUX_SYMBOL(__setup_start) = .; \
- *(.init.setup) \
+ KEEP(*(.init.setup)) \
VMLINUX_SYMBOL(__setup_end) = .;
#define INIT_CALLS_LEVEL(level) \
VMLINUX_SYMBOL(__initcall##level##_start) = .; \
- *(.initcall##level##.init) \
- *(.initcall##level##s.init) \
+ KEEP(*(.initcall##level##.init)) \
+ KEEP(*(.initcall##level##s.init)) \
#define INIT_CALLS \
VMLINUX_SYMBOL(__initcall_start) = .; \
- *(.initcallearly.init) \
+ KEEP(*(.initcallearly.init)) \
INIT_CALLS_LEVEL(0) \
INIT_CALLS_LEVEL(1) \
INIT_CALLS_LEVEL(2) \
@@ -648,21 +649,21 @@
#define CON_INITCALL \
VMLINUX_SYMBOL(__con_initcall_start) = .; \
- *(.con_initcall.init) \
+ KEEP(*(.con_initcall.init)) \
VMLINUX_SYMBOL(__con_initcall_end) = .;
#define SECURITY_INITCALL \
VMLINUX_SYMBOL(__security_initcall_start) = .; \
- *(.security_initcall.init) \
+ KEEP(*(.security_initcall.init)) \
VMLINUX_SYMBOL(__security_initcall_end) = .;
#ifdef CONFIG_BLK_DEV_INITRD
#define INIT_RAM_FS \
. = ALIGN(4); \
VMLINUX_SYMBOL(__initramfs_start) = .; \
- *(.init.ramfs) \
+ KEEP(*(.init.ramfs)) \
. = ALIGN(8); \
- *(.init.ramfs.info)
+ KEEP(*(.init.ramfs.info))
#else
#define INIT_RAM_FS
#endif
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -18,11 +18,16 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
LDFLAGS_MODULE += --be8
endif
+LDFLAGS_vmlinux += --gc-sections
OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
+endif
+
# Never generate .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -15,13 +15,13 @@
#define PROC_INFO \
. = ALIGN(4); \
VMLINUX_SYMBOL(__proc_info_begin) = .; \
- *(.proc.info.init) \
+ KEEP(*(.proc.info.init)) \
VMLINUX_SYMBOL(__proc_info_end) = .;
#define IDMAP_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__idmap_text_start) = .; \
- *(.idmap.text) \
+ KEEP(*(.idmap.text)) \
VMLINUX_SYMBOL(__idmap_text_end) = .; \
. = ALIGN(32); \
VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
@@ -101,7 +101,7 @@ SECTIONS
.text : { /* Real text segment */
_stext = .; /* Text and read-only data */
__exception_text_start = .;
- *(.exception.text)
+ KEEP(*(.exception.text))
__exception_text_end = .;
IRQENTRY_TEXT
TEXT_TEXT
@@ -129,7 +129,7 @@ SECTIONS
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
#ifdef CONFIG_MMU
- *(__ex_table)
+ KEEP(*(__ex_table))
#endif
__stop___ex_table = .;
}
@@ -141,12 +141,12 @@ SECTIONS
. = ALIGN(8);
.ARM.unwind_idx : {
__start_unwind_idx = .;
- *(.ARM.exidx*)
+ KEEP(*(.ARM.exidx*))
__stop_unwind_idx = .;
}
.ARM.unwind_tab : {
__start_unwind_tab = .;
- *(.ARM.extab*)
+ KEEP(*(.ARM.extab*))
__stop_unwind_tab = .;
}
#endif
@@ -169,14 +169,14 @@ SECTIONS
*/
__vectors_start = .;
.vectors 0 : AT(__vectors_start) {
- *(.vectors)
+ KEEP(*(.vectors))
}
. = __vectors_start + SIZEOF(.vectors);
__vectors_end = .;
__stubs_start = .;
.stubs 0x1000 : AT(__stubs_start) {
- *(.stubs)
+ KEEP(*(.stubs))
}
. = __stubs_start + SIZEOF(.stubs);
__stubs_end = .;
@@ -190,24 +190,24 @@ SECTIONS
}
.init.arch.info : {
__arch_info_begin = .;
- *(.arch.info.init)
+ KEEP(*(.arch.info.init))
__arch_info_end = .;
}
.init.tagtable : {
__tagtable_begin = .;
- *(.taglist.init)
+ KEEP(*(.taglist.init))
__tagtable_end = .;
}
#ifdef CONFIG_SMP_ON_UP
.init.smpalt : {
__smpalt_begin = .;
- *(.alt.smp.init)
+ KEEP(*(.alt.smp.init))
__smpalt_end = .;
}
#endif
.init.pv_table : {
__pv_table_begin = .;
- *(.pv_table)
+ KEEP(*(.pv_table))
__pv_table_end = .;
}
.init.data : {
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -122,6 +122,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
asflags-y := -DZIMAGE

View File

@ -1,88 +0,0 @@
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -54,6 +54,16 @@
#define LOAD_OFFSET 0
#endif
+#ifndef SYMTAB_KEEP
+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
+#endif
+
+#ifndef SYMTAB_DISCARD
+#define SYMTAB_DISCARD
+#define SYMTAB_DISCARD_GPL
+#endif
+
#include <linux/export.h>
/* Align . to a 8 byte boundary equals to maximum function alignment. */
@@ -289,14 +299,14 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
- KEEP(*(SORT(___ksymtab+*))) \
+ SYMTAB_KEEP \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
- KEEP(*(SORT(___ksymtab_gpl+*))) \
+ SYMTAB_KEEP_GPL \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
@@ -358,7 +368,7 @@
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
- *(__ksymtab_strings) \
+ *(__ksymtab_strings+*) \
} \
\
/* __*init sections */ \
@@ -682,6 +692,8 @@
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \
+ SYMTAB_DISCARD \
+ SYMTAB_DISCARD_GPL \
*(.discard) \
*(.discard.*) \
}
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -299,7 +299,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
+ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -C -U$(ARCH) \
-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
$(obj)/%.lds: $(src)/%.lds.S FORCE
--- a/include/linux/export.h
+++ b/include/linux/export.h
@@ -52,12 +52,19 @@ extern struct module __this_module;
#define __CRC_SYMBOL(sym, sec)
#endif
+#ifdef MODULE
+#define __EXPORT_SUFFIX(sym)
+#else
+#define __EXPORT_SUFFIX(sym) "+" #sym
+#endif
+
/* For every exported symbol, place a struct in the __ksymtab section */
#define __EXPORT_SYMBOL(sym, sec) \
extern typeof(sym) sym; \
__CRC_SYMBOL(sym, sec) \
static const char __kstrtab_##sym[] \
- __attribute__((section("__ksymtab_strings"), aligned(1))) \
+ __attribute__((section("__ksymtab_strings" \
+ __EXPORT_SUFFIX(sym)), aligned(1))) \
= VMLINUX_SYMBOL_STR(sym); \
extern const struct kernel_symbol __ksymtab_##sym; \
__visible const struct kernel_symbol __ksymtab_##sym \

View File

@ -1,58 +0,0 @@
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -323,7 +323,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
quiet_cmd_lzma = LZMA $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
quiet_cmd_lzo = LZO $@
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -226,7 +226,7 @@ cpio_list=
output="/dev/stdout"
output_file=""
is_cpio_compressed=
-compr="gzip -n -9 -f"
+compr="gzip -n -9 -f -"
arg="$1"
case "$arg" in
@@ -242,13 +242,13 @@ case "$arg" in
output=${cpio_list}
echo "$output_file" | grep -q "\.gz$" \
&& [ -x "`which gzip 2> /dev/null`" ] \
- && compr="gzip -n -9 -f"
+ && compr="gzip -n -9 -f -"
echo "$output_file" | grep -q "\.bz2$" \
&& [ -x "`which bzip2 2> /dev/null`" ] \
- && compr="bzip2 -9 -f"
+ && compr="bzip2 -9 -f -"
echo "$output_file" | grep -q "\.lzma$" \
&& [ -x "`which lzma 2> /dev/null`" ] \
- && compr="lzma -9 -f"
+ && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
echo "$output_file" | grep -q "\.xz$" \
&& [ -x "`which xz 2> /dev/null`" ] \
&& compr="xz --check=crc32 --lzma2=dict=1MiB"
@@ -315,7 +315,7 @@ if [ ! -z ${output_file} ]; then
if [ "${is_cpio_compressed}" = "compressed" ]; then
cat ${cpio_tfile} > ${output_file}
else
- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \
+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \
|| (rm -f ${output_file} ; false)
fi
[ -z ${cpio_file} ] && rm ${cpio_tfile}
--- a/lib/decompress.c
+++ b/lib/decompress.c
@@ -48,6 +48,7 @@ static const struct compress_format comp
{ {0x1f, 0x9e}, "gzip", gunzip },
{ {0x42, 0x5a}, "bzip2", bunzip2 },
{ {0x5d, 0x00}, "lzma", unlzma },
+ { {0x6d, 0x00}, "lzma-openwrt", unlzma },
{ {0xfd, 0x37}, "xz", unxz },
{ {0x89, 0x4c}, "lzo", unlzo },
{ {0x02, 0x21}, "lz4", unlz4 },

View File

@ -1,18 +0,0 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -210,7 +210,6 @@ config NF_CONNTRACK_FTP
config NF_CONNTRACK_H323
tristate "H.323 protocol support"
- depends on (IPV6 || IPV6=n)
depends on NETFILTER_ADVANCED
help
H.323 is a VoIP signalling protocol from ITU-T. As one of the most
@@ -924,7 +923,6 @@ config NETFILTER_XT_TARGET_SECMARK
config NETFILTER_XT_TARGET_TCPMSS
tristate '"TCPMSS" target support'
- depends on (IPV6 || IPV6=n)
default m if NETFILTER_ADVANCED=n
---help---
This option adds a `TCPMSS' target, which allows you to alter the

View File

@ -1,18 +0,0 @@
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -10,13 +10,13 @@ config SND_DMAENGINE_PCM
tristate
config SND_HWDEP
- tristate
+ tristate "Sound hardware support"
config SND_RAWMIDI
tristate
config SND_COMPRESS_OFFLOAD
- tristate
+ tristate "Compression offloading support"
# To be effective this also requires INPUT - users should say:
# select SND_JACK if INPUT=y || INPUT=SND

View File

@ -1,10 +0,0 @@
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -164,6 +164,7 @@ config CRYPTO_DEV_MV_CESA
depends on PLAT_ORION
select CRYPTO_ALGAPI
select CRYPTO_AES
+ select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
select CRYPTO_HASH
help

View File

@ -1,29 +0,0 @@
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -29,6 +29,7 @@ config SSB_SPROM
config SSB_BLOCKIO
bool
depends on SSB
+ default y
config SSB_PCIHOST_POSSIBLE
bool
@@ -49,7 +50,7 @@ config SSB_PCIHOST
config SSB_B43_PCI_BRIDGE
bool
depends on SSB_PCIHOST
- default n
+ default y
config SSB_PCMCIAHOST_POSSIBLE
bool
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -17,6 +17,7 @@ config BCMA
config BCMA_BLOCKIO
bool
depends on BCMA
+ default y
config BCMA_HOST_PCI_POSSIBLE
bool

View File

@ -1,23 +0,0 @@
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -329,16 +329,16 @@ config BCH_CONST_T
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
- bool
+ boolean "Textsearch support"
config TEXTSEARCH_KMP
- tristate
+ tristate "Textsearch KMP"
config TEXTSEARCH_BM
- tristate
+ tristate "Textsearch BM"
config TEXTSEARCH_FSM
- tristate
+ tristate "Textsearch FSM"
config BTREE
bool

View File

@ -1,31 +0,0 @@
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -183,7 +183,7 @@ config CFG80211_WEXT
extensions with cfg80211-based drivers.
config LIB80211
- tristate
+ tristate "LIB80211"
default n
help
This options enables a library of common routines used
@@ -192,13 +192,16 @@ config LIB80211
Drivers should select this themselves if needed.
config LIB80211_CRYPT_WEP
- tristate
+ tristate "LIB80211_CRYPT_WEP"
+ select LIB80211
config LIB80211_CRYPT_CCMP
- tristate
+ tristate "LIB80211_CRYPT_CCMP"
+ select LIB80211
config LIB80211_CRYPT_TKIP
- tristate
+ tristate "LIB80211_CRYPT_TKIP"
+ select LIB80211
config LIB80211_DEBUG
bool "lib80211 debugging messages"

View File

@ -1,47 +0,0 @@
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -32,7 +32,7 @@ config CRYPTO_FIPS
this is.
config CRYPTO_ALGAPI
- tristate
+ tristate "ALGAPI"
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
- tristate
+ tristate "AEAD"
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
select CRYPTO_ALGAPI2
config CRYPTO_BLKCIPHER
- tristate
+ tristate "BLKCIPHER"
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
select CRYPTO_WORKQUEUE
config CRYPTO_HASH
- tristate
+ tristate "HASH"
select CRYPTO_HASH2
select CRYPTO_ALGAPI
@@ -70,7 +70,7 @@ config CRYPTO_HASH2
select CRYPTO_ALGAPI2
config CRYPTO_RNG
- tristate
+ tristate "RNG"
select CRYPTO_RNG2
select CRYPTO_ALGAPI

View File

@ -1,22 +0,0 @@
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,5 @@
config WIRELESS_EXT
- bool
+ bool "Wireless extensions"
config WEXT_CORE
def_bool y
@@ -11,10 +11,10 @@ config WEXT_PROC
depends on WEXT_CORE
config WEXT_SPY
- bool
+ bool "WEXT_SPY"
config WEXT_PRIV
- bool
+ bool "WEXT_PRIV"
config CFG80211
tristate "cfg80211 - wireless configuration API"

View File

@ -1,11 +0,0 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -2,7 +2,7 @@ menu "Core Netfilter Configuration"
depends on NET && INET && NETFILTER
config NETFILTER_NETLINK
- tristate
+ tristate "Netfilter NFNETLINK interface"
config NETFILTER_NETLINK_ACCT
tristate "Netfilter NFACCT over NFNETLINK interface"

View File

@ -1,84 +0,0 @@
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -3,29 +3,35 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
- bool
+ tristate "Regmap"
config REGMAP_AC97
+ select REGMAP
tristate
config REGMAP_I2C
- tristate
+ tristate "Regmap I2C"
+ select REGMAP
depends on I2C
config REGMAP_SPI
- tristate
+ tristate "Regmap SPI"
+ select REGMAP
+ depends on SPI_MASTER
depends on SPI
config REGMAP_SPMI
+ select REGMAP
tristate
depends on SPMI
config REGMAP_MMIO
- tristate
+ tristate "Regmap MMIO"
+ select REGMAP
config REGMAP_IRQ
+ select REGMAP
bool
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -50,7 +50,7 @@ struct reg_default {
unsigned int def;
};
-#ifdef CONFIG_REGMAP
+#if IS_ENABLED(CONFIG_REGMAP)
enum regmap_endian {
/* Unspecified -> 0 -> Backwards compatible default */
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1,6 +1,8 @@
-obj-$(CONFIG_REGMAP) += regmap.o regcache.o
-obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
-obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-lzo.o regcache-flat.o
+ifdef CONFIG_DEBUG_FS
+regmap-core-objs += regmap-debugfs.o
+endif
+obj-$(CONFIG_REGMAP) += regmap-core.o
obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/of.h>
@@ -2631,3 +2632,5 @@ static int __init regmap_initcall(void)
return 0;
}
postcore_initcall(regmap_initcall);
+
+MODULE_LICENSE("GPL");

View File

@ -1,37 +0,0 @@
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -96,10 +96,10 @@ config CRYPTO_MANAGER
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
- select CRYPTO_AEAD2
- select CRYPTO_HASH2
- select CRYPTO_BLKCIPHER2
- select CRYPTO_PCOMP2
+ select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
+ select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
+ select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
+ select CRYPTO_PCOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
--- a/crypto/algboss.c
+++ b/crypto/algboss.c
@@ -248,6 +248,9 @@ static int cryptomgr_schedule_test(struc
type = alg->cra_flags;
/* This piece of crap needs to disappear into per-type test hooks. */
+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
+ type |= CRYPTO_ALG_TESTED;
+#else
if ((!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) &
CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV) &&
((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
@@ -256,6 +259,7 @@ static int cryptomgr_schedule_test(struc
(!((type ^ CRYPTO_ALG_TYPE_AEAD) & CRYPTO_ALG_TYPE_MASK) &&
alg->cra_type == &crypto_nivaead_type && alg->cra_aead.ivsize))
type |= CRYPTO_ALG_TESTED;
+#endif
param->type = type;

View File

@ -1,35 +0,0 @@
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -214,25 +214,25 @@ config RANDOM32_SELFTEST
# compression support is select'ed if needed
#
config ZLIB_INFLATE
- tristate
+ tristate "ZLIB inflate support"
config ZLIB_DEFLATE
- tristate
+ tristate "ZLIB deflate support"
config LZO_COMPRESS
- tristate
+ tristate "LZO compress support"
config LZO_DECOMPRESS
- tristate
+ tristate "LZO decompress support"
config LZ4_COMPRESS
- tristate
+ tristate "LZ4 compress support"
config LZ4HC_COMPRESS
- tristate
+ tristate "LZ4HC compress support"
config LZ4_DECOMPRESS
- tristate
+ tristate "LZ4 decompress support"
source "lib/xz/Kconfig"

View File

@ -1,34 +0,0 @@
From 8b05e325824d3b38e52a7748b3b5dc34dc1c0f6d Mon Sep 17 00:00:00 2001
From: David Heidelberger <david.heidelberger@ixit.cz>
Date: Mon, 29 Jun 2015 14:37:54 +0200
Subject: [PATCH 1/3] uapi/kernel.h: glibc specific inclusion of sysinfo.h
including sysinfo.h from kernel.h makes no sense whatsoever,
but removing it breaks glibc's userspace header,
which includes kernel.h instead of sysinfo.h from their sys/sysinfo.h.
this seems to be a historical mistake.
on musl, including any header that uses kernel.h directly or indirectly
plus sys/sysinfo.h will produce a compile error due to redefinition of
struct sysinfo from sys/sysinfo.h.
so for now, only include it on glibc or when including from kernel
in order not to break their headers.
Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Signed-off-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
include/uapi/linux/kernel.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/uapi/linux/kernel.h
+++ b/include/uapi/linux/kernel.h
@@ -1,7 +1,9 @@
#ifndef _UAPI_LINUX_KERNEL_H
#define _UAPI_LINUX_KERNEL_H
+#if defined(__KERNEL__) || defined( __GLIBC__)
#include <linux/sysinfo.h>
+#endif
/*
* 'kernel.h' contains some often-used function prototypes etc

View File

@ -1,81 +0,0 @@
From f972afc2509eebcb00d370256c55b112a3b5ffca Mon Sep 17 00:00:00 2001
From: David Heidelberger <david.heidelberger@ixit.cz>
Date: Mon, 29 Jun 2015 16:50:40 +0200
Subject: [PATCH 2/3] uapi/libc-compat.h: do not rely on __GLIBC__
Musl provides the same structs as glibc, but does not provide a define to
allow its detection. Since the absence of __GLIBC__ also can mean that it
is included from the kernel, change the __GLIBC__ detection to
!__KERNEL__, which should always be true when included from userspace.
Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
include/uapi/linux/libc-compat.h | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/include/uapi/linux/libc-compat.h
+++ b/include/uapi/linux/libc-compat.h
@@ -48,13 +48,13 @@
#ifndef _UAPI_LIBC_COMPAT_H
#define _UAPI_LIBC_COMPAT_H
-/* We have included glibc headers... */
-#if defined(__GLIBC__)
+/* We have included libc headers... */
+#if !defined(__KERNEL__)
-/* Coordinate with glibc netinet/in.h header. */
+/* Coordinate with libc netinet/in.h header. */
#if defined(_NETINET_IN_H)
-/* GLIBC headers included first so don't define anything
+/* LIBC headers included first so don't define anything
* that would already be defined. */
#define __UAPI_DEF_IN_ADDR 0
#define __UAPI_DEF_IN_IPPROTO 0
@@ -68,7 +68,7 @@
* if the glibc code didn't define them. This guard matches
* the guard in glibc/inet/netinet/in.h which defines the
* additional in6_addr macros e.g. s6_addr16, and s6_addr32. */
-#if defined(__USE_MISC) || defined (__USE_GNU)
+#if !defined(__GLIBC__) || defined(__USE_MISC) || defined (__USE_GNU)
#define __UAPI_DEF_IN6_ADDR_ALT 0
#else
#define __UAPI_DEF_IN6_ADDR_ALT 1
@@ -83,7 +83,7 @@
#else
/* Linux headers included first, and we must define everything
- * we need. The expectation is that glibc will check the
+ * we need. The expectation is that the libc will check the
* __UAPI_DEF_* defines and adjust appropriately. */
#define __UAPI_DEF_IN_ADDR 1
#define __UAPI_DEF_IN_IPPROTO 1
@@ -93,7 +93,7 @@
#define __UAPI_DEF_IN_CLASS 1
#define __UAPI_DEF_IN6_ADDR 1
-/* We unconditionally define the in6_addr macros and glibc must
+/* We unconditionally define the in6_addr macros and the libc must
* coordinate. */
#define __UAPI_DEF_IN6_ADDR_ALT 1
#define __UAPI_DEF_SOCKADDR_IN6 1
@@ -115,7 +115,7 @@
/* If we did not see any headers from any supported C libraries,
* or we are being included in the kernel, then define everything
* that we need. */
-#else /* !defined(__GLIBC__) */
+#else /* defined(__KERNEL__) */
/* Definitions for in.h */
#define __UAPI_DEF_IN_ADDR 1
@@ -138,6 +138,6 @@
/* Definitions for xattr.h */
#define __UAPI_DEF_XATTR 1
-#endif /* __GLIBC__ */
+#endif /* __KERNEL__ */
#endif /* _UAPI_LIBC_COMPAT_H */

View File

@ -1,67 +0,0 @@
From fcbb6fed85ea9ff4feb4f1ebd4f0f235fdaf06b6 Mon Sep 17 00:00:00 2001
From: David Heidelberger <david.heidelberger@ixit.cz>
Date: Mon, 29 Jun 2015 16:53:03 +0200
Subject: [PATCH 3/3] uapi/if_ether.h: prevent redefinition of struct ethhdr
Musl provides its own ethhdr struct definition. Add a guard to prevent
its definition of the appropriate musl header has already been included.
Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
include/uapi/linux/if_ether.h | 3 +++
include/uapi/linux/libc-compat.h | 11 +++++++++++
2 files changed, 14 insertions(+)
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -22,6 +22,7 @@
#define _UAPI_LINUX_IF_ETHER_H
#include <linux/types.h>
+#include <linux/libc-compat.h>
/*
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
@@ -134,11 +135,13 @@
* This is an Ethernet frame header.
*/
+#if __UAPI_DEF_ETHHDR
struct ethhdr {
unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
unsigned char h_source[ETH_ALEN]; /* source ether addr */
__be16 h_proto; /* packet type ID field */
} __attribute__((packed));
+#endif
#endif /* _UAPI_LINUX_IF_ETHER_H */
--- a/include/uapi/linux/libc-compat.h
+++ b/include/uapi/linux/libc-compat.h
@@ -51,6 +51,14 @@
/* We have included libc headers... */
#if !defined(__KERNEL__)
+/* musl defines the ethhdr struct itself in its netinet/if_ether.h.
+ * Glibc just includes the kernel header and uses a different guard. */
+#if defined(_NETINET_IF_ETHER_H)
+#define __UAPI_DEF_ETHHDR 0
+#else
+#define __UAPI_DEF_ETHHDR 1
+#endif
+
/* Coordinate with libc netinet/in.h header. */
#if defined(_NETINET_IN_H)
@@ -117,6 +125,9 @@
* that we need. */
#else /* defined(__KERNEL__) */
+/* Definitions for if_ether.h */
+#define __UAPI_DEF_ETHHDR 1
+
/* Definitions for in.h */
#define __UAPI_DEF_IN_ADDR 1
#define __UAPI_DEF_IN_IPPROTO 1

View File

@ -1,39 +0,0 @@
From: Mark Miller <mark@mirell.org>
This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
certain Broadcom chipsets running CFE in order to load the kernel.
Signed-off-by: Mark Miller <mark@mirell.org>
Acked-by: Rob Landley <rob@landley.net>
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -941,9 +941,6 @@ config FW_ARC
config ARCH_MAY_HAVE_PC_FDC
bool
-config BOOT_RAW
- bool
-
config CEVT_BCM1480
bool
@@ -2594,6 +2591,18 @@ config USE_OF
config BUILTIN_DTB
bool
+config BOOT_RAW
+ bool "Enable the kernel to be executed from the load address"
+ default n
+ help
+ Allow the kernel to be executed from the load address for
+ bootloaders which cannot read the ELF format. This places
+ a jump to start_kernel at the load address.
+
+ If unsure, say N.
+
+
+
endmenu
config LOCKDEP_SUPPORT

View File

@ -1,28 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1030,6 +1030,10 @@ config SYNC_R4K
config MIPS_MACHINE
def_bool n
+config IMAGE_CMDLINE_HACK
+ bool "OpenWrt specific image command line hack"
+ default n
+
config NO_IOPORT_MAP
def_bool n
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -80,6 +80,12 @@ FEXPORT(__kernel_entry)
j kernel_entry
#endif
+#ifdef CONFIG_IMAGE_CMDLINE_HACK
+ .ascii "CMDLINE:"
+EXPORT(__image_cmdline)
+ .fill 0x400
+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
+
__REF
NESTED(kernel_entry, 16, sp) # kernel entry point

View File

@ -1,11 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -87,7 +87,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
# machines may also. Since BFD is incredibly buggy with respect to
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
-cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
KBUILD_AFLAGS_MODULE += -mlong-calls

View File

@ -1,105 +0,0 @@
From: Manuel Lauss <manuel.lauss@gmail.com>
Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
Date: Mon, 7 Apr 2014 12:57:04 +0200
Message-Id: <1396868224-252888-2-git-send-email-manuel.lauss@gmail.com>
This small patch makes the MIPS FPU emulator optional. The kernel
kills float-users on systems without a hardware FPU by sending a SIGILL.
Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
optimizing for size).
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
v4: rediffed because of patch 1/2, should now work with micromips as well
v3: updated patch description with size savings.
v2: incorporated changes suggested by Jonas Gorski
force the fpu emulator on for micromips: relocating the parts
of the mmips code in the emulator to other areas would be a
much larger change; I went the cheap route instead with this.
arch/mips/Kbuild | 2 +-
arch/mips/Kconfig | 14 ++++++++++++++
arch/mips/include/asm/fpu.h | 5 +++--
arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
4 files changed, 33 insertions(+), 3 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2586,6 +2586,20 @@ config MIPS_O32_FP64_SUPPORT
If unsure, say N.
+config MIPS_FPU_EMULATOR
+ bool "MIPS FPU Emulator"
+ default y
+ help
+ This option lets you disable the built-in MIPS FPU (Coprocessor 1)
+ emulator, which handles floating-point instructions on processors
+ without a hardware FPU. It is generally a good idea to keep the
+ emulator built-in, unless you are perfectly sure you have a
+ complete soft-float environment. With the emulator disabled, all
+ users of float operations will be killed with an illegal instr-
+ uction exception.
+
+ Say Y, please.
+
config USE_OF
bool
select OF
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -292,7 +292,7 @@ OBJCOPYFLAGS += --remove-section=.regin
head-y := arch/mips/kernel/head.o
libs-y += arch/mips/lib/
-libs-y += arch/mips/math-emu/
+libs-$(CONFIG_MIPS_FPU_EMULATOR) += arch/mips/math-emu/
# See arch/mips/Kbuild for content of core part of the kernel
core-y += arch/mips/
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -212,8 +212,10 @@ static inline int init_fpu(void)
/* Restore FRE */
write_c0_config5(config5);
enable_fpu_hazard();
- } else
+ } else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
fpu_emulator_init_fpu();
+ else
+ ret = SIGILL;
return ret;
}
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -30,6 +30,7 @@
#include <asm/local.h>
#include <asm/processor.h>
+#ifdef CONFIG_MIPS_FPU_EMULATOR
#ifdef CONFIG_DEBUG_FS
struct mips_fpu_emulator_stats {
@@ -65,6 +66,20 @@ extern int do_dsemulret(struct pt_regs *
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_struct *ctx, int has_fpu,
void *__user *fault_addr);
+#else /* no CONFIG_MIPS_FPU_EMULATOR */
+static inline int do_dsemulret(struct pt_regs *xcp)
+{
+ return 0; /* 0 means error, should never get here anyway */
+}
+
+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
+ struct mips_fpu_struct *ctx, int has_fpu,
+ void *__user *fault_addr)
+{
+ return SIGILL; /* we don't speak MIPS FPU */
+}
+#endif /* CONFIG_MIPS_FPU_EMULATOR */
+
int process_fpemu_return(int sig, void __user *fault_addr);
int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
unsigned long *contpc);

View File

@ -1,352 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -90,8 +90,13 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
+ifdef CONFIG_64BIT
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+else
+KBUILD_AFLAGS_MODULE += -mno-long-calls
+KBUILD_CFLAGS_MODULE += -mno-long-calls
+endif
ifndef CONFIG_FUNCTION_TRACER
KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -11,6 +11,11 @@ struct mod_arch_specific {
const struct exception_table_entry *dbe_start;
const struct exception_table_entry *dbe_end;
struct mips_hi16 *r_mips_hi16_list;
+
+ void *phys_plt_tbl;
+ void *virt_plt_tbl;
+ unsigned int phys_plt_offset;
+ unsigned int virt_plt_offset;
};
typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -43,14 +43,221 @@ struct mips_hi16 {
static LIST_HEAD(dbe_list);
static DEFINE_SPINLOCK(dbe_lock);
-#ifdef MODULE_START
+/*
+ * Get the potential max trampolines size required of the init and
+ * non-init sections. Only used if we cannot find enough contiguous
+ * physically mapped memory to put the module into.
+ */
+static unsigned int
+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ const char *secstrings, unsigned int symindex, bool is_init)
+{
+ unsigned long ret = 0;
+ unsigned int i, j;
+ Elf_Sym *syms;
+
+ /* Everything marked ALLOC (this includes the exported symbols) */
+ for (i = 1; i < hdr->e_shnum; ++i) {
+ unsigned int info = sechdrs[i].sh_info;
+
+ if (sechdrs[i].sh_type != SHT_REL
+ && sechdrs[i].sh_type != SHT_RELA)
+ continue;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ /* Don't bother with non-allocated sections */
+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ continue;
+
+ /* If it's called *.init*, and we're not init, we're
+ not interested */
+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
+ != is_init)
+ continue;
+
+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
+ if (sechdrs[i].sh_type == SHT_REL) {
+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
+
+ for (j = 0; j < size; ++j) {
+ Elf_Sym *sym;
+
+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
+ continue;
+
+ sym = syms + ELF_MIPS_R_SYM(rel[j]);
+ if (!is_init && sym->st_shndx != SHN_UNDEF)
+ continue;
+
+ ret += 4 * sizeof(int);
+ }
+ } else {
+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
+
+ for (j = 0; j < size; ++j) {
+ Elf_Sym *sym;
+
+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
+ continue;
+
+ sym = syms + ELF_MIPS_R_SYM(rela[j]);
+ if (!is_init && sym->st_shndx != SHN_UNDEF)
+ continue;
+
+ ret += 4 * sizeof(int);
+ }
+ }
+ }
+
+ return ret;
+}
+
+#ifndef MODULE_START
+static void *alloc_phys(unsigned long size)
+{
+ unsigned order;
+ struct page *page;
+ struct page *p;
+
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
+ __GFP_THISNODE, order);
+ if (!page)
+ return NULL;
+
+ split_page(page, order);
+
+ /* mark all pages except for the last one */
+ for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
+ set_bit(PG_owner_priv_1, &p->flags);
+
+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
+ __free_page(p);
+
+ return page_address(page);
+}
+#endif
+
+static void free_phys(void *ptr)
+{
+ struct page *page;
+ bool free;
+
+ page = virt_to_page(ptr);
+ do {
+ free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
+ __free_page(page);
+ page++;
+ } while (free);
+}
+
+
void *module_alloc(unsigned long size)
{
+#ifdef MODULE_START
return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
__builtin_return_address(0));
+#else
+ void *ptr;
+
+ if (size == 0)
+ return NULL;
+
+ ptr = alloc_phys(size);
+
+ /* If we failed to allocate physically contiguous memory,
+ * fall back to regular vmalloc. The module loader code will
+ * create jump tables to handle long jumps */
+ if (!ptr)
+ return vmalloc(size);
+
+ return ptr;
+#endif
}
+
+static inline bool is_phys_addr(void *ptr)
+{
+#ifdef CONFIG_64BIT
+ return (KSEGX((unsigned long)ptr) == CKSEG0);
+#else
+ return (KSEGX(ptr) == KSEG0);
#endif
+}
+
+/* Free memory returned from module_alloc */
+void module_memfree(void *module_region)
+{
+ if (is_phys_addr(module_region))
+ free_phys(module_region);
+ else
+ vfree(module_region);
+}
+
+static void *__module_alloc(int size, bool phys)
+{
+ void *ptr;
+
+ if (phys)
+ ptr = kmalloc(size, GFP_KERNEL);
+ else
+ ptr = vmalloc(size);
+ return ptr;
+}
+
+static void __module_free(void *ptr)
+{
+ if (is_phys_addr(ptr))
+ kfree(ptr);
+ else
+ vfree(ptr);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ char *secstrings, struct module *mod)
+{
+ unsigned int symindex = 0;
+ unsigned int core_size, init_size;
+ int i;
+
+ mod->arch.phys_plt_offset = 0;
+ mod->arch.virt_plt_offset = 0;
+ mod->arch.phys_plt_tbl = NULL;
+ mod->arch.virt_plt_tbl = NULL;
+
+ if (IS_ENABLED(CONFIG_64BIT))
+ return 0;
+
+ for (i = 1; i < hdr->e_shnum; i++)
+ if (sechdrs[i].sh_type == SHT_SYMTAB)
+ symindex = i;
+
+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
+
+ if ((core_size + init_size) == 0)
+ return 0;
+
+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
+ if (!mod->arch.phys_plt_tbl)
+ return -ENOMEM;
+
+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
+ if (!mod->arch.virt_plt_tbl) {
+ __module_free(mod->arch.phys_plt_tbl);
+ mod->arch.phys_plt_tbl = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
{
@@ -64,8 +271,39 @@ static int apply_r_mips_32_rel(struct mo
return 0;
}
+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
+ void *start, Elf_Addr v)
+{
+ unsigned *tramp = start + *plt_offset;
+ *plt_offset += 4 * sizeof(int);
+
+ /* adjust carry for addiu */
+ if (v & 0x00008000)
+ v += 0x10000;
+
+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */
+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */
+ tramp[2] = 0x03200008; /* jr t9 */
+ tramp[3] = 0x00000000; /* nop */
+
+ return (Elf_Addr) tramp;
+}
+
+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
+{
+ if (is_phys_addr(location))
+ return add_plt_entry_to(&me->arch.phys_plt_offset,
+ me->arch.phys_plt_tbl, v);
+ else
+ return add_plt_entry_to(&me->arch.virt_plt_offset,
+ me->arch.virt_plt_tbl, v);
+
+}
+
static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
{
+ u32 ofs = *location & 0x03ffffff;
+
if (v % 4) {
pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
me->name);
@@ -73,14 +311,17 @@ static int apply_r_mips_26_rel(struct mo
}
if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
+ v = add_plt_entry(me, location, v + (ofs << 2));
+ if (!v) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n", me->name);
+ return -ENOEXEC;
+ }
+ ofs = 0;
}
*location = (*location & ~0x03ffffff) |
- ((*location + (v >> 2)) & 0x03ffffff);
+ ((ofs + (v >> 2)) & 0x03ffffff);
return 0;
}
@@ -287,9 +528,33 @@ int module_finalize(const Elf_Ehdr *hdr,
list_add(&me->arch.dbe_list, &dbe_list);
spin_unlock_irq(&dbe_lock);
}
+
+ /* Get rid of the fixup trampoline if we're running the module
+ * from physically mapped address space */
+ if (me->arch.phys_plt_offset == 0) {
+ __module_free(me->arch.phys_plt_tbl);
+ me->arch.phys_plt_tbl = NULL;
+ }
+ if (me->arch.virt_plt_offset == 0) {
+ __module_free(me->arch.virt_plt_tbl);
+ me->arch.virt_plt_tbl = NULL;
+ }
+
return 0;
}
+void module_arch_freeing_init(struct module *mod)
+{
+ if (mod->arch.phys_plt_tbl) {
+ __module_free(mod->arch.phys_plt_tbl);
+ mod->arch.phys_plt_tbl = NULL;
+ }
+ if (mod->arch.virt_plt_tbl) {
+ __module_free(mod->arch.virt_plt_tbl);
+ mod->arch.virt_plt_tbl = NULL;
+ }
+}
+
void module_arch_cleanup(struct module *mod)
{
spin_lock_irq(&dbe_lock);

View File

@ -1,83 +0,0 @@
--- a/arch/mips/include/asm/string.h
+++ b/arch/mips/include/asm/string.h
@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
#define __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count);
+#define memset(__s, __c, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memset((__s), (__c), __len); \
+ else \
+ __ret = __builtin_memset((__s), (__c), __len); \
+ __ret; \
+})
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+#define memcpy(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memcpy((dst), (src), __len); \
+ else \
+ __ret = __builtin_memcpy((dst), (src), __len); \
+ __ret; \
+})
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+#define memmove(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memmove((dst), (src), __len); \
+ else \
+ __ret = __builtin_memmove((dst), (src), __len); \
+ __ret; \
+})
+
+#define __HAVE_ARCH_MEMCMP
+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
#endif /* _ASM_STRING_H */
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -4,7 +4,7 @@
lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
mips-atomic.o strlen_user.o strncpy_user.o \
- strnlen_user.o uncached.o
+ strnlen_user.o uncached.o memcmp.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+++ b/arch/mips/lib/memcmp.c
@@ -0,0 +1,22 @@
+/*
+ * copied from linux/lib/string.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#undef memcmp
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res = 0;
+
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ if ((res = *su1 - *su2) != 0)
+ break;
+ return res;
+}
+EXPORT_SYMBOL(memcmp);
+

View File

@ -1,17 +0,0 @@
Adjust highmem offset to 0x10000000 to ensure that all kmalloc allocations
stay within the same 256M boundary. This ensures that -mlong-calls is not
needed on systems with more than 256M RAM.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -44,7 +44,7 @@
* Memory above this physical address will be considered highmem.
*/
#ifndef HIGHMEM_START
-#define HIGHMEM_START _AC(0x20000000, UL)
+#define HIGHMEM_START _AC(0x10000000, UL)
#endif
#endif /* CONFIG_32BIT */

View File

@ -1,32 +0,0 @@
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -38,6 +38,7 @@ void (*__flush_cache_vunmap)(void);
void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
+EXPORT_SYMBOL(__flush_cache_all);
void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
/* MIPS specific cache operations */
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -20,6 +20,9 @@
#include <linux/swap.h>
#include <linux/splice.h>
#include <linux/aio.h>
+#ifdef CONFIG_MIPS
+#include <asm/cacheflush.h>
+#endif
MODULE_ALIAS_MISCDEV(FUSE_MINOR);
MODULE_ALIAS("devname:fuse");
@@ -825,6 +828,9 @@ static int fuse_copy_fill(struct fuse_co
static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
{
unsigned ncpy = min(*size, cs->len);
+#ifdef CONFIG_MIPS
+ __flush_cache_all();
+#endif
if (val) {
void *pgaddr = kmap_atomic(cs->pg);
void *buf = pgaddr + cs->offset;

View File

@ -1,13 +0,0 @@
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -83,6 +83,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
return -ENOEXEC;
}
+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
+ ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ continue;
+
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {

View File

@ -1,31 +0,0 @@
Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
they still want to support gcc 3.3 -- well, we don't.
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -203,7 +203,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
KBUILD_CFLAGS += -mno-sched-epilog
endif
-cpu-as-$(CONFIG_4xx) += -Wa,-m405
+cpu-as-$(CONFIG_40x) += -Wa,-m405
+cpu-as-$(CONFIG_44x) += -Wa,-m440
cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_E200) += -Wa,-me200
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,10 +45,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
DTC_FLAGS ?= -p 1024
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405

View File

@ -1,10 +0,0 @@
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -165,7 +165,6 @@ CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
ifeq ($(CONFIG_476FPE_ERR46),y)
KBUILD_LDFLAGS_MODULE += --ppc476-workaround \

View File

@ -1,298 +0,0 @@
From d8582dcf1ed66eee88a11e4760f42c0d6c8822be Mon Sep 17 00:00:00 2001
From: Yousong Zhou <yszhou4tech@gmail.com>
Date: Sat, 31 Jan 2015 22:26:03 +0800
Subject: [PATCH 331/331] MIPS: kexec: Accept command line parameters from
userspace.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
---
arch/mips/kernel/machine_kexec.c | 153 +++++++++++++++++++++++++++++++-----
arch/mips/kernel/machine_kexec.h | 20 +++++
arch/mips/kernel/relocate_kernel.S | 21 +++--
3 files changed, 167 insertions(+), 27 deletions(-)
create mode 100644 arch/mips/kernel/machine_kexec.h
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -10,45 +10,145 @@
#include <linux/mm.h>
#include <linux/delay.h>
+#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
-
-extern const unsigned char relocate_new_kernel[];
-extern const size_t relocate_new_kernel_size;
-
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
+#include <asm/uaccess.h>
+#include "machine_kexec.h"
int (*_machine_kexec_prepare)(struct kimage *) = NULL;
void (*_machine_kexec_shutdown)(void) = NULL;
void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
+
#ifdef CONFIG_SMP
void (*relocated_kexec_smp_wait) (void *);
atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
#endif
-int
-machine_kexec_prepare(struct kimage *kimage)
+static void machine_kexec_print_args(void)
{
+ unsigned long argc = (int)kexec_args[0];
+ int i;
+
+ pr_info("kexec_args[0] (argc): %lu\n", argc);
+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
+
+ for (i = 0; i < argc; i++) {
+ pr_info("kexec_argv[%d] = %p, %s\n",
+ i, kexec_argv[i], kexec_argv[i]);
+ }
+}
+
+static void machine_kexec_init_argv(struct kimage *image)
+{
+ void __user *buf = NULL;
+ size_t bufsz;
+ size_t size;
+ int i;
+
+ bufsz = 0;
+ for (i = 0; i < image->nr_segments; i++) {
+ struct kexec_segment *seg;
+
+ seg = &image->segment[i];
+ if (seg->bufsz < 6)
+ continue;
+
+ if (strncmp((char *) seg->buf, "kexec ", 6))
+ continue;
+
+ buf = seg->buf;
+ bufsz = seg->bufsz;
+ break;
+ }
+
+ if (!buf)
+ return;
+
+ size = KEXEC_COMMAND_LINE_SIZE;
+ size = min(size, bufsz);
+ if (size < bufsz)
+ pr_warn("kexec command line truncated to %zd bytes\n", size);
+
+ /* Copy to kernel space */
+ copy_from_user(kexec_argv_buf, buf, size);
+ kexec_argv_buf[size - 1] = 0;
+}
+
+static void machine_kexec_parse_argv(struct kimage *image)
+{
+ char *reboot_code_buffer;
+ int reloc_delta;
+ char *ptr;
+ int argc;
+ int i;
+
+ ptr = kexec_argv_buf;
+ argc = 0;
+
+ /*
+ * convert command line string to array of parameters
+ * (as bootloader does).
+ */
+ while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
+ if (*ptr == ' ') {
+ *ptr++ = '\0';
+ continue;
+ }
+
+ kexec_argv[argc++] = ptr;
+ ptr = strchr(ptr, ' ');
+ }
+
+ if (!argc)
+ return;
+
+ kexec_args[0] = argc;
+ kexec_args[1] = (unsigned long)kexec_argv;
+ kexec_args[2] = 0;
+ kexec_args[3] = 0;
+
+ reboot_code_buffer = page_address(image->control_code_page);
+ reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
+
+ kexec_args[1] += reloc_delta;
+ for (i = 0; i < argc; i++)
+ kexec_argv[i] += reloc_delta;
+}
+
+int machine_kexec_prepare(struct kimage *kimage)
+{
+ /*
+ * Whenever arguments passed from kexec-tools, Init the arguments as
+ * the original ones to try avoiding booting failure.
+ */
+
+ kexec_args[0] = fw_arg0;
+ kexec_args[1] = fw_arg1;
+ kexec_args[2] = fw_arg2;
+ kexec_args[3] = fw_arg3;
+
+ machine_kexec_init_argv(kimage);
+ machine_kexec_parse_argv(kimage);
+
if (_machine_kexec_prepare)
return _machine_kexec_prepare(kimage);
return 0;
}
-void
-machine_kexec_cleanup(struct kimage *kimage)
+void machine_kexec_cleanup(struct kimage *kimage)
{
}
-void
-machine_shutdown(void)
+void machine_shutdown(void)
{
if (_machine_kexec_shutdown)
_machine_kexec_shutdown();
}
-void
-machine_crash_shutdown(struct pt_regs *regs)
+void machine_crash_shutdown(struct pt_regs *regs)
{
if (_machine_crash_shutdown)
_machine_crash_shutdown(regs);
@@ -66,10 +166,12 @@ machine_kexec(struct kimage *image)
unsigned long *ptr;
reboot_code_buffer =
- (unsigned long)page_address(image->control_code_page);
+ (unsigned long)page_address(image->control_code_page);
+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
kexec_start_address =
(unsigned long) phys_to_virt(image->start);
+ pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
if (image->type == KEXEC_TYPE_DEFAULT) {
kexec_indirection_page =
@@ -77,9 +179,19 @@ machine_kexec(struct kimage *image)
} else {
kexec_indirection_page = (unsigned long)&image->head;
}
+ pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- memcpy((void*)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
+ pr_info("Where is memcpy: %p\n", memcpy);
+ pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
+ (void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
+ pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
+ (void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
+ memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
+ KEXEC_RELOCATE_NEW_KERNEL_SIZE);
+
+ pr_info("Before _print_args().\n");
+ machine_kexec_print_args();
+ pr_info("Before eval loop.\n");
/*
* The generic kexec code builds a page list with physical
@@ -98,15 +210,16 @@ machine_kexec(struct kimage *image)
/*
* we do not want to be bothered.
*/
+ pr_info("Before irq_disable.\n");
local_irq_disable();
- printk("Will call new kernel at %08lx\n", image->start);
- printk("Bye ...\n");
+ pr_info("Will call new kernel at %08lx\n", image->start);
+ pr_info("Bye ...\n");
__flush_cache_all();
#ifdef CONFIG_SMP
/* All secondary cpus now may jump to kexec_wait cycle */
relocated_kexec_smp_wait = reboot_code_buffer +
- (void *)(kexec_smp_wait - relocate_new_kernel);
+ (void *)(kexec_smp_wait - kexec_relocate_new_kernel);
smp_wmb();
atomic_set(&kexec_ready_to_reboot, 1);
#endif
--- /dev/null
+++ b/arch/mips/kernel/machine_kexec.h
@@ -0,0 +1,20 @@
+#ifndef _MACHINE_KEXEC_H
+#define _MACHINE_KEXEC_H
+
+#ifndef __ASSEMBLY__
+extern const unsigned char kexec_relocate_new_kernel[];
+extern unsigned long kexec_relocate_new_kernel_end;
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+
+extern char kexec_argv_buf[];
+extern char *kexec_argv[];
+
+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE ((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
+#endif /* !__ASSEMBLY__ */
+
+#define KEXEC_COMMAND_LINE_SIZE 256
+#define KEXEC_ARGV_SIZE (KEXEC_COMMAND_LINE_SIZE / 16)
+#define KEXEC_MAX_ARGC (KEXEC_ARGV_SIZE / sizeof(long))
+
+#endif
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -12,8 +12,9 @@
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/addrspace.h>
+#include "machine_kexec.h"
-LEAF(relocate_new_kernel)
+LEAF(kexec_relocate_new_kernel)
PTR_L a0, arg0
PTR_L a1, arg1
PTR_L a2, arg2
@@ -98,7 +99,7 @@ done:
#endif
/* jump to kexec_start_address */
j s1
- END(relocate_new_kernel)
+ END(kexec_relocate_new_kernel)
#ifdef CONFIG_SMP
/*
@@ -184,9 +185,15 @@ kexec_indirection_page:
PTR 0
.size kexec_indirection_page, PTRSIZE
-relocate_new_kernel_end:
+kexec_argv_buf:
+ EXPORT(kexec_argv_buf)
+ .skip KEXEC_COMMAND_LINE_SIZE
+ .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
+
+kexec_argv:
+ EXPORT(kexec_argv)
+ .skip KEXEC_ARGV_SIZE
+ .size kexec_argv, KEXEC_ARGV_SIZE
-relocate_new_kernel_size:
- EXPORT(relocate_new_kernel_size)
- PTR relocate_new_kernel_end - relocate_new_kernel
- .size relocate_new_kernel_size, PTRSIZE
+kexec_relocate_new_kernel_end:
+ EXPORT(kexec_relocate_new_kernel_end)

View File

@ -1,171 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -12,6 +12,23 @@ menuconfig MTD
if MTD
+menu "OpenWrt specific MTD options"
+
+config MTD_ROOTFS_ROOT_DEV
+ bool "Automatically set 'rootfs' partition to be root filesystem"
+ default y
+
+config MTD_SPLIT_FIRMWARE
+ bool "Automatically split firmware partition for kernel+rootfs"
+ default y
+
+config MTD_SPLIT_FIRMWARE_NAME
+ string "Firmware partition name"
+ depends on MTD_SPLIT_FIRMWARE
+ default "firmware"
+
+endmenu
+
config MTD_TESTS
tristate "MTD tests support (DANGEROUS)"
depends on m
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -29,9 +29,11 @@
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/magic.h>
#include <linux/err.h>
#include "mtdcore.h"
+#include "mtdsplit/mtdsplit.h"
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
@@ -45,13 +47,14 @@ struct mtd_part {
struct list_head list;
};
+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
+
/*
* Given a pointer to the MTD object in the mtd_part structure, we can retrieve
* the pointer to that structure with this macro.
*/
#define PART(x) ((struct mtd_part *)(x))
-
/*
* MTD methods which simply translate the effective address and pass through
* to the _real_ device.
@@ -546,8 +549,10 @@ out_register:
return slave;
}
-int mtd_add_partition(struct mtd_info *master, const char *name,
- long long offset, long long length)
+
+static int
+__mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length, bool dup_check)
{
struct mtd_partition part;
struct mtd_part *p, *new;
@@ -579,21 +584,24 @@ int mtd_add_partition(struct mtd_info *m
end = offset + length;
mutex_lock(&mtd_partitions_mutex);
- list_for_each_entry(p, &mtd_partitions, list)
- if (p->master == master) {
- if ((start >= p->offset) &&
- (start < (p->offset + p->mtd.size)))
- goto err_inv;
-
- if ((end >= p->offset) &&
- (end < (p->offset + p->mtd.size)))
- goto err_inv;
- }
+ if (dup_check) {
+ list_for_each_entry(p, &mtd_partitions, list)
+ if (p->master == master) {
+ if ((start >= p->offset) &&
+ (start < (p->offset + p->mtd.size)))
+ goto err_inv;
+
+ if ((end >= p->offset) &&
+ (end < (p->offset + p->mtd.size)))
+ goto err_inv;
+ }
+ }
list_add(&new->list, &mtd_partitions);
mutex_unlock(&mtd_partitions_mutex);
add_mtd_device(&new->mtd);
+ mtd_partition_split(master, new);
return ret;
err_inv:
@@ -603,6 +611,12 @@ err_inv:
}
EXPORT_SYMBOL_GPL(mtd_add_partition);
+int mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length)
+{
+ return __mtd_add_partition(master, name, offset, length, true);
+}
+
int mtd_del_partition(struct mtd_info *master, int partno)
{
struct mtd_part *slave, *next;
@@ -626,6 +640,35 @@ int mtd_del_partition(struct mtd_info *m
}
EXPORT_SYMBOL_GPL(mtd_del_partition);
+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
+#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
+#else
+#define SPLIT_FIRMWARE_NAME "unused"
+#endif
+
+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
+{
+}
+
+void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
+ int offset, int size)
+{
+}
+
+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
+{
+ static int rootfs_found = 0;
+
+ if (rootfs_found)
+ return;
+
+ if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
+ config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
+ split_firmware(master, part);
+
+ arch_split_mtd_part(master, part->mtd.name, part->offset,
+ part->mtd.size);
+}
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
@@ -655,6 +698,7 @@ int add_mtd_partitions(struct mtd_info *
mutex_unlock(&mtd_partitions_mutex);
add_mtd_device(&slave->mtd);
+ mtd_partition_split(master, slave);
cur_offset = slave->offset + slave->mtd.size;
}
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -84,5 +84,7 @@ int mtd_add_partition(struct mtd_info *m
long long offset, long long length);
int mtd_del_partition(struct mtd_info *master, int partno);
uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+extern void __weak arch_split_mtd_part(struct mtd_info *master,
+ const char *name, int offset, int size);
#endif

View File

@ -1,113 +0,0 @@
From 02cff0ccaa6d364f5c1eeea83f47ac80ccc967d4 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 3 Sep 2013 18:11:50 +0200
Subject: [PATCH] mtd: add support for different partition parser types
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/mtd/mtdpart.c | 56 ++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/partitions.h | 11 ++++++++
2 files changed, 67 insertions(+)
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -728,6 +728,30 @@ static struct mtd_part_parser *get_parti
#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+static struct mtd_part_parser *
+get_partition_parser_by_type(enum mtd_parser_type type,
+ struct mtd_part_parser *start)
+{
+ struct mtd_part_parser *p, *ret = NULL;
+
+ spin_lock(&part_parser_lock);
+
+ p = list_prepare_entry(start, &part_parsers, list);
+ if (start)
+ put_partition_parser(start);
+
+ list_for_each_entry_continue(p, &part_parsers, list) {
+ if (p->type == type && try_module_get(p->owner)) {
+ ret = p;
+ break;
+ }
+ }
+
+ spin_unlock(&part_parser_lock);
+
+ return ret;
+}
+
void register_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
@@ -801,6 +825,38 @@ int parse_mtd_partitions(struct mtd_info
return ret;
}
+int parse_mtd_partitions_by_type(struct mtd_info *master,
+ enum mtd_parser_type type,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_part_parser *prev = NULL;
+ int ret = 0;
+
+ while (1) {
+ struct mtd_part_parser *parser;
+
+ parser = get_partition_parser_by_type(type, prev);
+ if (!parser)
+ break;
+
+ ret = (*parser->parse_fn)(master, pparts, data);
+
+ if (ret > 0) {
+ put_partition_parser(parser);
+ printk(KERN_NOTICE
+ "%d %s partitions found on MTD device %s\n",
+ ret, parser->name, master->name);
+ break;
+ }
+
+ prev = parser;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
+
int mtd_is_partition(const struct mtd_info *mtd)
{
struct mtd_part *part;
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -68,12 +68,17 @@ struct mtd_part_parser_data {
* Functions dealing with the various ways of partitioning the space
*/
+enum mtd_parser_type {
+ MTD_PARSER_TYPE_DEVICE = 0,
+};
+
struct mtd_part_parser {
struct list_head list;
struct module *owner;
const char *name;
int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
struct mtd_part_parser_data *);
+ enum mtd_parser_type type;
};
extern void register_mtd_parser(struct mtd_part_parser *parser);
@@ -87,4 +92,9 @@ uint64_t mtd_get_device_size(const struc
extern void __weak arch_split_mtd_part(struct mtd_info *master,
const char *name, int offset, int size);
+int parse_mtd_partitions_by_type(struct mtd_info *master,
+ enum mtd_parser_type type,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data);
+
#endif

View File

@ -1,72 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -640,6 +640,37 @@ int mtd_del_partition(struct mtd_info *m
}
EXPORT_SYMBOL_GPL(mtd_del_partition);
+static int
+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
+{
+ struct mtd_partition *parts;
+ int nr_parts;
+ int i;
+
+ nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts,
+ NULL);
+ if (nr_parts <= 0)
+ return nr_parts;
+
+ if (WARN_ON(!parts))
+ return 0;
+
+ for (i = 0; i < nr_parts; i++) {
+ /* adjust partition offsets */
+ parts[i].offset += slave->offset;
+
+ __mtd_add_partition(slave->master,
+ parts[i].name,
+ parts[i].offset,
+ parts[i].size,
+ false);
+ }
+
+ kfree(parts);
+
+ return nr_parts;
+}
+
#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
#else
@@ -648,6 +679,7 @@ EXPORT_SYMBOL_GPL(mtd_del_partition);
static void split_firmware(struct mtd_info *master, struct mtd_part *part)
{
+ run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
}
void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
@@ -662,6 +694,12 @@ static void mtd_partition_split(struct m
if (rootfs_found)
return;
+ if (!strcmp(part->mtd.name, "rootfs")) {
+ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
+
+ rootfs_found = 1;
+ }
+
if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
split_firmware(master, part);
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -70,6 +70,8 @@ struct mtd_part_parser_data {
enum mtd_parser_type {
MTD_PARSER_TYPE_DEVICE = 0,
+ MTD_PARSER_TYPE_ROOTFS,
+ MTD_PARSER_TYPE_FIRMWARE,
};
struct mtd_part_parser {

View File

@ -1,22 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME
depends on MTD_SPLIT_FIRMWARE
default "firmware"
+source "drivers/mtd/mtdsplit/Kconfig"
+
endmenu
config MTD_TESTS
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_MTD) += mtd.o
mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
+obj-$(CONFIG_MTD_SPLIT) += mtdsplit/
+
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o

View File

@ -1,101 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -444,14 +444,12 @@ static struct mtd_part *allocate_partiti
if (slave->offset == MTDPART_OFS_APPEND)
slave->offset = cur_offset;
if (slave->offset == MTDPART_OFS_NXTBLK) {
- slave->offset = cur_offset;
- if (mtd_mod_by_eb(cur_offset, master) != 0) {
- /* Round up to next erasesize */
- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
+ /* Round up to next erasesize */
+ slave->offset = mtd_roundup_to_eb(cur_offset, master);
+ if (slave->offset != cur_offset)
printk(KERN_NOTICE "Moving partition %d: "
"0x%012llx -> 0x%012llx\n", partno,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
- }
}
if (slave->offset == MTDPART_OFS_RETAIN) {
slave->offset = cur_offset;
@@ -671,6 +669,17 @@ run_parsers_by_type(struct mtd_part *sla
return nr_parts;
}
+static inline unsigned long
+mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
+{
+ unsigned long mask = mtd->erasesize - 1;
+
+ len += offset & mask;
+ len = (len + mask) & ~mask;
+ len -= offset & mask;
+ return len;
+}
+
#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
#else
@@ -912,6 +921,24 @@ int mtd_is_partition(const struct mtd_in
}
EXPORT_SYMBOL_GPL(mtd_is_partition);
+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
+{
+ if (!mtd_is_partition(mtd))
+ return (struct mtd_info *)mtd;
+
+ return PART(mtd)->master;
+}
+EXPORT_SYMBOL_GPL(mtdpart_get_master);
+
+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
+{
+ if (!mtd_is_partition(mtd))
+ return 0;
+
+ return PART(mtd)->offset;
+}
+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
+
/* Returns the size of the entire flash chip */
uint64_t mtd_get_device_size(const struct mtd_info *mtd)
{
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -90,6 +90,8 @@ int mtd_is_partition(const struct mtd_in
int mtd_add_partition(struct mtd_info *master, const char *name,
long long offset, long long length);
int mtd_del_partition(struct mtd_info *master, int partno);
+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
uint64_t mtd_get_device_size(const struct mtd_info *mtd);
extern void __weak arch_split_mtd_part(struct mtd_info *master,
const char *name, int offset, int size);
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -334,6 +334,24 @@ static inline uint32_t mtd_mod_by_eb(uin
return do_div(sz, mtd->erasesize);
}
+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd_mod_by_eb(sz, mtd) == 0)
+ return sz;
+
+ /* Round up to next erase block */
+ return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
+}
+
+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd_mod_by_eb(sz, mtd) == 0)
+ return sz;
+
+ /* Round down to the start of the current erase block */
+ return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
+}
+
static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
{
if (mtd->writesize_shift)

View File

@ -1,70 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -27,6 +27,11 @@ config MTD_SPLIT_FIRMWARE_NAME
depends on MTD_SPLIT_FIRMWARE
default "firmware"
+config MTD_UIMAGE_SPLIT
+ bool "Enable split support for firmware partitions containing a uImage"
+ depends on MTD_SPLIT_FIRMWARE
+ default y
+
source "drivers/mtd/mtdsplit/Kconfig"
endmenu
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -680,6 +680,37 @@ mtd_pad_erasesize(struct mtd_info *mtd,
return len;
}
+#define UBOOT_MAGIC 0x27051956
+
+static void split_uimage(struct mtd_info *master, struct mtd_part *part)
+{
+ struct {
+ __be32 magic;
+ __be32 pad[2];
+ __be32 size;
+ } hdr;
+ size_t len;
+
+ if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr))
+ return;
+
+ if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
+ return;
+
+ len = be32_to_cpu(hdr.size) + 0x40;
+ len = mtd_pad_erasesize(master, part->offset, len);
+ if (len + master->erasesize > part->mtd.size)
+ return;
+
+ if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
+ pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
+ else
+ pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n");
+
+ __mtd_add_partition(master, "rootfs", part->offset + len,
+ part->mtd.size - len, false);
+}
+
#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
#else
@@ -688,7 +719,14 @@ mtd_pad_erasesize(struct mtd_info *mtd,
static void split_firmware(struct mtd_info *master, struct mtd_part *part)
{
- run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
+ int ret;
+
+ ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
+ if (ret > 0)
+ return;
+
+ if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT))
+ split_uimage(master, part);
}
void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,

View File

@ -1,76 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -18,6 +18,11 @@ config MTD_ROOTFS_ROOT_DEV
bool "Automatically set 'rootfs' partition to be root filesystem"
default y
+config MTD_ROOTFS_SPLIT
+ bool "Automatically split 'rootfs' partition for squashfs"
+ select MTD_SPLIT
+ default y
+
config MTD_SPLIT_FIRMWARE
bool "Automatically split firmware partition for kernel+rootfs"
default y
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -680,6 +680,47 @@ mtd_pad_erasesize(struct mtd_info *mtd,
return len;
}
+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
+{
+ size_t squashfs_len;
+ int len, ret;
+
+ ret = mtd_get_squashfs_len(master, offset, &squashfs_len);
+ if (ret)
+ return ret;
+
+ len = mtd_pad_erasesize(master, offset, squashfs_len);
+ *split_offset = offset + len;
+
+ return 0;
+}
+
+static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part)
+{
+ unsigned int split_offset = 0;
+ unsigned int split_size;
+ int ret;
+
+ ret = split_squashfs(master, part->offset, &split_offset);
+ if (ret)
+ return;
+
+ if (split_offset <= 0)
+ return;
+
+ if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT))
+ pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n");
+ else
+ pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n");
+
+ split_size = part->mtd.size - (split_offset - part->offset);
+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
+ ROOTFS_SPLIT_NAME, split_offset, split_size);
+
+ __mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset,
+ split_size, false);
+}
+
#define UBOOT_MAGIC 0x27051956
static void split_uimage(struct mtd_info *master, struct mtd_part *part)
@@ -742,7 +783,10 @@ static void mtd_partition_split(struct m
return;
if (!strcmp(part->mtd.name, "rootfs")) {
- run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
+ int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
+
+ if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT))
+ split_rootfs_data(master, part);
rootfs_found = 1;
}

View File

@ -1,18 +0,0 @@
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -35,6 +35,7 @@
* Note: writeable partitions require their size and offset be
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
*/
+struct mtd_info;
struct mtd_partition {
const char *name; /* identifier string */
@@ -50,7 +51,6 @@ struct mtd_partition {
#define MTDPART_SIZ_FULL (0)
-struct mtd_info;
struct device_node;
/**

View File

@ -1,142 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -35,6 +35,8 @@
#include "mtdcore.h"
#include "mtdsplit/mtdsplit.h"
+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */
+
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
static DEFINE_MUTEX(mtd_partitions_mutex);
@@ -233,13 +235,61 @@ static int part_erase(struct mtd_info *m
struct mtd_part *part = PART(mtd);
int ret;
+
+ instr->partial_start = false;
+ if (mtd->flags & MTD_ERASE_PARTIAL) {
+ size_t readlen = 0;
+ u64 mtd_ofs;
+
+ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
+ if (!instr->erase_buf)
+ return -ENOMEM;
+
+ mtd_ofs = part->offset + instr->addr;
+ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
+
+ if (instr->erase_buf_ofs > 0) {
+ instr->addr -= instr->erase_buf_ofs;
+ ret = mtd_read(part->master,
+ instr->addr + part->offset,
+ part->master->erasesize,
+ &readlen, instr->erase_buf);
+
+ instr->len += instr->erase_buf_ofs;
+ instr->partial_start = true;
+ } else {
+ mtd_ofs = part->offset + part->mtd.size;
+ instr->erase_buf_ofs = part->master->erasesize -
+ do_div(mtd_ofs, part->master->erasesize);
+
+ if (instr->erase_buf_ofs > 0) {
+ instr->len += instr->erase_buf_ofs;
+ ret = mtd_read(part->master,
+ part->offset + instr->addr +
+ instr->len - part->master->erasesize,
+ part->master->erasesize, &readlen,
+ instr->erase_buf);
+ } else {
+ ret = 0;
+ }
+ }
+ if (ret < 0) {
+ kfree(instr->erase_buf);
+ return ret;
+ }
+
+ }
+
instr->addr += part->offset;
ret = part->master->_erase(part->master, instr);
if (ret) {
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
instr->addr -= part->offset;
+ if (mtd->flags & MTD_ERASE_PARTIAL)
+ kfree(instr->erase_buf);
}
+
return ret;
}
@@ -247,7 +297,25 @@ void mtd_erase_callback(struct erase_inf
{
if (instr->mtd->_erase == part_erase) {
struct mtd_part *part = PART(instr->mtd);
+ size_t wrlen = 0;
+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
+ if (instr->partial_start) {
+ part->master->_write(part->master,
+ instr->addr, instr->erase_buf_ofs,
+ &wrlen, instr->erase_buf);
+ instr->addr += instr->erase_buf_ofs;
+ } else {
+ instr->len -= instr->erase_buf_ofs;
+ part->master->_write(part->master,
+ instr->addr + instr->len,
+ instr->erase_buf_ofs, &wrlen,
+ instr->erase_buf +
+ part->master->erasesize -
+ instr->erase_buf_ofs);
+ }
+ kfree(instr->erase_buf);
+ }
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
instr->addr -= part->offset;
@@ -513,17 +581,20 @@ static struct mtd_part *allocate_partiti
if ((slave->mtd.flags & MTD_WRITEABLE) &&
mtd_mod_by_eb(slave->offset, &slave->mtd)) {
/* Doesn't start on a boundary of major erase size */
- /* FIXME: Let it be writable if it is on a boundary of
- * _minor_ erase size though */
- slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
- part->name);
+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
+ if (((u32) slave->mtd.size) > master->erasesize)
+ slave->mtd.flags &= ~MTD_WRITEABLE;
+ else
+ slave->mtd.erasesize = slave->mtd.size;
}
if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
- slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
- part->name);
+ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
+
+ if ((u32) slave->mtd.size > master->erasesize)
+ slave->mtd.flags &= ~MTD_WRITEABLE;
+ else
+ slave->mtd.erasesize = slave->mtd.size;
}
slave->mtd.ecclayout = master->ecclayout;
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -55,6 +55,10 @@ struct erase_info {
u_long priv;
u_char state;
struct erase_info *next;
+
+ u8 *erase_buf;
+ u32 erase_buf_ofs;
+ bool partial_start;
};
struct mtd_erase_region_info {

View File

@ -1,18 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -334,7 +334,14 @@ static int part_lock(struct mtd_info *mt
static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = PART(mtd);
- return part->master->_unlock(part->master, ofs + part->offset, len);
+
+ ofs += part->offset;
+ if (mtd->flags & MTD_ERASE_PARTIAL) {
+ /* round up len to next erasesize and round down offset to prev block */
+ len = (mtd_div_by_eb(len, part->master) + 1) * part->master->erasesize;
+ ofs &= ~(part->master->erasesize - 1);
+ }
+ return part->master->_unlock(part->master, ofs, len);
}
static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)

View File

@ -1,30 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
#endif
names += strlen(names)+1;
-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
- i++;
- parts[i].offset = parts[i-1].size + parts[i-1].offset;
- parts[i].size = fl->next->img->flash_base - parts[i].offset;
- parts[i].name = nullname;
- }
+ if (!strcmp(parts[i].name, "rootfs")) {
+ parts[i].size = fl->next->img->flash_base;
+ parts[i].size &= ~(master->erasesize - 1);
+ parts[i].size -= parts[i].offset;
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ nrparts--;
+ } else {
+ i++;
+ parts[i].offset = parts[i-1].size + parts[i-1].offset;
+ parts[i].size = fl->next->img->flash_base - parts[i].offset;
+ parts[i].name = nullname;
#endif
+ }
+ }
tmp_fl = fl;
fl = fl->next;
kfree(tmp_fl);

View File

@ -1,35 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -184,6 +184,22 @@ config MTD_BCM47XX_PARTS
This provides partitions parser for devices based on BCM47xx
boards.
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on ADM5120 || ATH25 || ATH79
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
#
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o

View File

@ -1,34 +0,0 @@
From 841e59ba3e496d86ca5f069204d5e5c1ad43c01d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 27 Jan 2015 22:29:21 +0100
Subject: [PATCH] mtd: bcm47xxpart: support for Xiaomi specific board_data
partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -33,6 +33,7 @@
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define BOARD_DATA_MAGIC2 0xBD0D0BBD
+#define BOARD_DATA_XIAOMI_MAGIC 0x474D4442 /* GMDB */
#define CFE_MAGIC 0x43464531 /* 1EFC */
#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define NVRAM_HEADER 0x48534C46 /* FLSH */
@@ -262,7 +263,8 @@ static int bcm47xxpart_parse(struct mtd_
}
/* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
- if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
+ if (buf[0x000 / 4] == BOARD_DATA_MAGIC2 ||
+ le32_to_cpu(buf[0x000 / 4]) == BOARD_DATA_XIAOMI_MAGIC) {
bcm47xxpart_add_part(&parts[curr_part++], "board_data",
offset, MTD_WRITEABLE);
continue;

View File

@ -1,42 +0,0 @@
From fd54aa583296f9adfb1f519affbc10ba521eb809 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 28 Jan 2015 22:14:41 +0100
Subject: [PATCH] mtd: bcm47xxpart: detect T_Meter partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It can be found on many Netgear devices. It consists of many 0x30 blocks
starting with 4D 54.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -39,6 +39,7 @@
#define NVRAM_HEADER 0x48534C46 /* FLSH */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
+#define T_METER_MAGIC 0x4D540000 /* MT */
#define ML_MAGIC1 0x39685a42
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
@@ -176,6 +177,15 @@ static int bcm47xxpart_parse(struct mtd_
MTD_WRITEABLE);
continue;
}
+
+ /* T_Meter */
+ if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
+ (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
+ (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
+ MTD_WRITEABLE);
+ continue;
+ }
/* TRX */
if (buf[0x000 / 4] == TRX_MAGIC) {

View File

@ -1,107 +0,0 @@
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/mutex.h>
#include <linux/mount.h>
#include <linux/slab.h>
@@ -209,11 +210,12 @@ static void block2mtd_free_device(struct
}
-static struct block2mtd_dev *add_device(char *devname, int erase_size)
+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
{
const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
struct block_device *bdev;
struct block2mtd_dev *dev;
+ struct mtd_partition *part;
char *name;
if (!devname)
@@ -257,13 +259,16 @@ static struct block2mtd_dev *add_device(
/* Setup the MTD structure */
/* make the name contain the block device in */
- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
+ if (!mtdname)
+ mtdname = devname;
+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
if (!name)
goto err_destroy_mutex;
+ strcpy(name, mtdname);
dev->mtd.name = name;
- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
dev->mtd.erasesize = erase_size;
dev->mtd.writesize = 1;
dev->mtd.writebufsize = PAGE_SIZE;
@@ -276,15 +281,18 @@ static struct block2mtd_dev *add_device(
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
- if (mtd_device_register(&dev->mtd, NULL, 0)) {
+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ part->name = name;
+ part->offset = 0;
+ part->size = dev->mtd.size;
+ if (mtd_device_register(&dev->mtd, part, 1)) {
/* Device didn't get added, so free the entry */
goto err_destroy_mutex;
}
list_add(&dev->list, &blkmtd_device_list);
pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
dev->mtd.index,
- dev->mtd.name + strlen("block2mtd: "),
- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
return dev;
err_destroy_mutex:
@@ -353,9 +361,9 @@ static char block2mtd_paramline[80 + 12]
static int block2mtd_setup2(const char *val)
{
- char buf[80 + 12]; /* 80 for device, 12 for erase size */
+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
char *str = buf;
- char *token[2];
+ char *token[3];
char *name;
size_t erase_size = PAGE_SIZE;
int i, ret;
@@ -368,7 +376,7 @@ static int block2mtd_setup2(const char *
strcpy(str, val);
kill_final_newline(str);
- for (i = 0; i < 2; i++)
+ for (i = 0; i < 3; i++)
token[i] = strsep(&str, ",");
if (str) {
@@ -394,8 +402,10 @@ static int block2mtd_setup2(const char *
return 0;
}
}
+ if (token[2] && (strlen(token[2]) + 1 > 80))
+ pr_err("mtd device name too long\n");
- add_device(name, erase_size);
+ add_device(name, erase_size, token[2]);
return 0;
}
@@ -429,7 +439,7 @@ static int block2mtd_setup(const char *v
module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
static int __init block2mtd_init(void)
{

View File

@ -1,110 +0,0 @@
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/bio.h>
@@ -210,13 +211,16 @@ static void block2mtd_free_device(struct
}
-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname, int timeout)
{
const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
- struct block_device *bdev;
+ struct block_device *bdev = ERR_PTR(-ENODEV);
struct block2mtd_dev *dev;
struct mtd_partition *part;
char *name;
+#ifndef MODULE
+ int i;
+#endif
if (!devname)
return NULL;
@@ -227,15 +231,20 @@ static struct block2mtd_dev *add_device(
/* Get a handle on the device */
bdev = blkdev_get_by_path(devname, mode, dev);
+
#ifndef MODULE
- if (IS_ERR(bdev)) {
+ for (i = 0; IS_ERR(bdev) && i <= timeout; i++) {
+ dev_t devt;
- /* We might not have rootfs mounted at this point. Try
- to resolve the device name by other means. */
+ if (i)
+ msleep(1000);
+ wait_for_device_probe();
+
+ devt = name_to_dev_t(devname);
+ if (!devt)
+ continue;
- dev_t devt = name_to_dev_t(devname);
- if (devt)
- bdev = blkdev_get_by_dev(devt, mode, dev);
+ bdev = blkdev_get_by_dev(devt, mode, dev);
}
#endif
@@ -361,11 +370,12 @@ static char block2mtd_paramline[80 + 12]
static int block2mtd_setup2(const char *val)
{
- char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ char buf[80 + 12 + 80 + 8]; /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
char *str = buf;
- char *token[3];
+ char *token[4];
char *name;
size_t erase_size = PAGE_SIZE;
+ unsigned long timeout = 0;
int i, ret;
if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
@@ -376,7 +386,7 @@ static int block2mtd_setup2(const char *
strcpy(str, val);
kill_final_newline(str);
- for (i = 0; i < 3; i++)
+ for (i = 0; i < 4; i++)
token[i] = strsep(&str, ",");
if (str) {
@@ -405,7 +415,10 @@ static int block2mtd_setup2(const char *
if (token[2] && (strlen(token[2]) + 1 > 80))
pr_err("mtd device name too long\n");
- add_device(name, erase_size, token[2]);
+ if (token[3] && kstrtoul(token[3], 0, &timeout))
+ pr_err("invalid timeout\n");
+
+ add_device(name, erase_size, token[2], timeout);
return 0;
}
@@ -439,7 +452,7 @@ static int block2mtd_setup(const char *v
module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
static int __init block2mtd_init(void)
{
@@ -474,7 +487,7 @@ static void block2mtd_exit(void)
}
-module_init(block2mtd_init);
+late_initcall(block2mtd_init);
module_exit(block2mtd_exit);
MODULE_LICENSE("GPL");

View File

@ -1,37 +0,0 @@
---
drivers/mtd/nand/plat_nand.c | 13 ++++++++++++-
include/linux/mtd/nand.h | 1 +
2 files changed, 13 insertions(+), 1 deletion(-)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -865,6 +865,7 @@ struct platform_nand_chip {
unsigned int options;
unsigned int bbt_options;
const char **part_probe_types;
+ int (*chip_fixup)(struct mtd_info *mtd);
};
/* Keep gcc happy */
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -90,7 +90,18 @@ static int plat_nand_probe(struct platfo
}
/* Scan to find existence of the device */
- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
+ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) {
+ err = -ENXIO;
+ goto out;
+ }
+
+ if (pdata->chip.chip_fixup) {
+ err = pdata->chip.chip_fixup(&data->mtd);
+ if (err)
+ goto out;
+ }
+
+ if (nand_scan_tail(&data->mtd)) {
err = -ENXIO;
goto out;
}

View File

@ -1,11 +0,0 @@
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -507,7 +507,7 @@ int __nand_correct_data(unsigned char *b
return 1; /* error in ECC data; no action needed */
pr_err("%s: uncorrectable ECC error\n", __func__);
- return -1;
+ return -EBADMSG;
}
EXPORT_SYMBOL(__nand_correct_data);

View File

@ -1,11 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -809,7 +809,7 @@ static int get_chip(struct map_info *map
return 0;
case FL_ERASING:
- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
!(mode == FL_READY || mode == FL_POINT ||
(mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
goto sleep;

View File

@ -1,18 +0,0 @@
From: George Kashperko <george@znau.edu.ua>
Issue map read after Write Buffer Load command to ensure chip is ready
to receive data.
Signed-off-by: George Kashperko <george@znau.edu.ua>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1830,6 +1830,7 @@ static int __xipram do_write_buffer(stru
/* Write Buffer Load */
map_write(map, CMD(0x25), cmd_adr);
+ (void) map_read(map, cmd_adr);
chip->state = FL_WRITING_TO_BUFFER;

View File

@ -1,20 +0,0 @@
From eef9dfc4e821408af1af13aa0cc707fc496fb7c6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Dec 2013 19:05:59 +0100
Subject: [PATCH] m25p80: add support for the Winbond W25X05 flash
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/mtd/devices/m25p80.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -649,6 +649,7 @@ static const struct spi_device_id spi_no
{ "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
{ "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
{ "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
{ "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },

Some files were not shown because too many files have changed in this diff Show More