mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
ath79: add support for Comfast E314N-v2
Taken code from https://patchwork.ozlabs.org/patch/884850/ that was never pushed by the author, and adapted to ath79. The Comfast E314N-V2 is a 2.4 GHz 2x2 radio with a built-in directional antenna and a second Ethernet port - very similar to the Ubiquiti NanoStation M2. The Ethernet port features a pass-through PoE capability, enabled or disabled with a slide switch. Specifications : - System-On-Chip: Qualcomm/Atheros QCA9531 - CPU/Speed: 650 MHz - Flash size: 8 MiB - RAM: 64 MiB - 2 Ethernet 1Gbp - 1 reset button - 1 switch to choose PoE from LAN or Wan. 48Vdc - Wifi 2.4 Ghz (b/g/n) - UART inside the box (3.3V, pins marked on the PCB) Firmware can be flashed on these units by the following method: 1.) Apply power to the unit 2.) Immediately AFTER applying power, hold down the reset button 3.) The WAN, LAN, and wireless lights will flash - wait three seconds (three flashes) and then release the button. 4.) After a second, the lights will flutter quickly and the unit will be visible at 192.168.1.1. A web page will be available to enable quick and simple uploading and flashing of firmware. During the boot process, these units also look for a tftp server at 192.168.1.10. If one is present, the firmware can be uploaded as a file called firmware-auto.bin Signed-off-by: Joan Moreau <jom@grosjo.net> [wrapped commit message - fix commit title capitalization] Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
Joan Moreau
David Bauer
parent
ccb4b96b8a
commit
abbbecaa73
@ -54,6 +54,15 @@ comfast,cf-e120a-v3)
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
|
||||
;;
|
||||
comfast,cf-e314n-v2)
|
||||
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
|
||||
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
|
||||
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
|
||||
;;
|
||||
comfast,cf-e5)
|
||||
ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
|
||||
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
|
||||
|
||||
@ -103,6 +103,7 @@ ath79_setup_interfaces()
|
||||
;;
|
||||
comfast,cf-e110n-v2|\
|
||||
comfast,cf-e120a-v3|\
|
||||
comfast,cf-e314n-v2|\
|
||||
tplink,cpe210-v1|\
|
||||
tplink,cpe220-v2|\
|
||||
tplink,cpe510-v1|\
|
||||
|
||||
154
target/linux/ath79/dts/qca9531_comfast_cf-e314n-v2.dts
Normal file
154
target/linux/ath79/dts/qca9531_comfast_cf-e314n-v2.dts
Normal file
@ -0,0 +1,154 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "comfast,cf-e314n-v2", "qca,qca9531";
|
||||
model = "COMFAST CF-E314N v2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart;
|
||||
led-boot = &system;
|
||||
led-failsafe = &system;
|
||||
led-upgrade = &system;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>;
|
||||
|
||||
wan {
|
||||
label = "cf-e314n-v2:green:wan";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "cf-e314n-v2:green:lan";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssilow {
|
||||
label = "cf-e314n-v2:red:signal1";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimediumlow {
|
||||
label = "cf-e314n-v2:red:signal2";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimediumhigh {
|
||||
label = "cf-e314n-v2:green:signal3";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
system: rssihigh {
|
||||
label = "cf-e314n-v2:green:signal4";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "cf-e314n-v2:green:wlan";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
led_rssilow_pin: pinmux_rssilow_pin {
|
||||
pinctrl-single,bits = <0x8 0x0 0xff000000>;
|
||||
};
|
||||
|
||||
led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
|
||||
pinctrl-single,bits = <0xc 0x0 0x00ff0000>;
|
||||
};
|
||||
|
||||
led_rssihigh_pin: pinmux_rssihigh_pin {
|
||||
pinctrl-single,bits = <0x10 0x0 0x000000ff>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@10000 {
|
||||
label = "art";
|
||||
reg = <0x010000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x020000 0x7c0000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "configs";
|
||||
reg = <0x7e0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
phy-handle = <&swphy4>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&art 0x6>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
@ -256,6 +256,15 @@ define Device/comfast_cf-e120a-v3
|
||||
endef
|
||||
TARGET_DEVICES += comfast_cf-e120a-v3
|
||||
|
||||
define Device/comfast_cf-e314n-v2
|
||||
ATH_SOC := qca9531
|
||||
DEVICE_VENDOR := COMFAST
|
||||
DEVICE_MODEL := CF-E314N
|
||||
DEVICE_VARIANT := v2
|
||||
DEVICE_PACKAGES := rssileds
|
||||
endef
|
||||
TARGET_DEVICES += comfast_cf-e314n-v2
|
||||
|
||||
define Device/comfast_cf-e5
|
||||
ATH_SOC := qca9531
|
||||
DEVICE_VENDOR := COMFAST
|
||||
|
||||
Loading…
Reference in New Issue
Block a user