qualcommax: cleanup whitespace and sort-order

Replace blanks with tabs, also sort base-files alphabetically.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>

target/linux/qualcommax/image/ipq807x.mk

@@ -48,16 +48,16 @@ endef
 TARGET_DEVICES += buffalo_wxr-5950ax12
 
 define Device/compex_wpq873
-       $(call Device/FitImage)
+	$(call Device/FitImage)
-       $(call Device/UbiFit)
+	$(call Device/UbiFit)
-       DEVICE_VENDOR := Compex
+	DEVICE_VENDOR := Compex
-       DEVICE_MODEL := WPQ873
+	DEVICE_MODEL := WPQ873
-       BLOCKSIZE := 128k
+	BLOCKSIZE := 128k
-       PAGESIZE := 2048
+	PAGESIZE := 2048
-       DEVICE_DTS_CONFIG := config@hk09.wpq873
+	DEVICE_DTS_CONFIG := config@hk09.wpq873
-       SOC := ipq8072
+	SOC := ipq8072
-       DEVICE_PACKAGES := ipq-wifi-compex_wpq873
+	DEVICE_PACKAGES := ipq-wifi-compex_wpq873
-       IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
+	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += compex_wpq873
 
@@ -242,18 +242,6 @@ endif
 endef
 TARGET_DEVICES += xiaomi_ax9000
 
-define Device/zyxel_nbg7815
-	$(call Device/FitImage)
-	$(call Device/EmmcImage)
-	DEVICE_VENDOR := ZYXEL
-	DEVICE_MODEL := NBG7815
-	DEVICE_DTS_CONFIG := config@nbg7815
-	SOC := ipq8074
-	DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
-		kmod-bluetooth
-endef
-TARGET_DEVICES += zyxel_nbg7815
-
 define Device/yuncore_ax880
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -269,3 +257,14 @@ define Device/yuncore_ax880
 endef
 TARGET_DEVICES += yuncore_ax880
 
+define Device/zyxel_nbg7815
+	$(call Device/FitImage)
+	$(call Device/EmmcImage)
+	DEVICE_VENDOR := ZYXEL
+	DEVICE_MODEL := NBG7815
+	DEVICE_DTS_CONFIG := config@nbg7815
+	SOC := ipq8074
+	DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci \
+		kmod-bluetooth kmod-hwmon-tmp103
+endef
+TARGET_DEVICES += zyxel_nbg7815

target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network

@@ -16,6 +16,11 @@ ipq807x_setup_interfaces()
 	xiaomi,ax9000)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
+	compex,wpq873|\
+	redmi,ax6|\
+	xiaomi,ax3600)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
 	edgecore,eap102|\
 	yuncore,ax880)
 		ucidef_set_interfaces_lan_wan "lan" "wan"
@@ -39,11 +44,6 @@ ipq807x_setup_interfaces()
 	qnap,301w)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
 		;;
-	compex,wpq873|\
-	redmi,ax6|\
-	xiaomi,ax3600)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
-		;;
 	zyxel,nbg7815)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
 		;;

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -11,9 +11,9 @@ case "$FIRMWARE" in
 	case "$board" in
 	buffalo,wxr-5950ax12|\
 	compex,wpq873|\
+	dynalink,dl-wrx36|\
 	edgecore,eap102|\
 	edimax,cax1800|\
-	dynalink,dl-wrx36|\
 	netgear,rax120v2|\
 	netgear,wax218|\
 	netgear,wax620|\
@@ -27,7 +27,7 @@ case "$FIRMWARE" in
 		caldata_extract "0:art" 0x1000 0x20000
 		;;
 	prpl,haze)
-                caldata_extract_mmc "0:ART" 0x1000 0x20000
+		caldata_extract_mmc "0:ART" 0x1000 0x20000
 		;;
 	esac
 	;;
@@ -35,7 +35,7 @@ case "$FIRMWARE" in
 "ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
 	case "$board" in
 	prpl,haze)
-                caldata_extract_mmc "0:ART" 0x26800 0x20000
+		caldata_extract_mmc "0:ART" 0x26800 0x20000
 		;;
 	xiaomi,ax9000)
 		caldata_extract "0:art" 0x26800 0x20000

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/mmc.sh

@@ -18,11 +18,11 @@ mmc_do_upgrade() {
 	local rootfs=
 	local kernel=
 
-			[ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
+	[ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
-			[ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
+	[ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
 
-			[ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
+	[ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
-			[ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
+	[ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
 
 	mmc_do_flash $tar_file $kernel $rootfs
 

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -51,7 +51,13 @@ platform_do_upgrade() {
 		nand_do_restore_config || nand_do_upgrade_failed
 		buffalo_upgrade_optvol
 		;;
-	dynalink,dl-wrx36)
+	compex,wpq873|\
+	dynalink,dl-wrx36|\
+	edimax,cax1800|\
+	netgear,rax120v2|\
+	netgear,wax218|\
+	netgear,wax620|\
+	netgear,wax630)
 		nand_do_upgrade "$1"
 		;;
 	edgecore,eap102)
@@ -66,34 +72,12 @@ platform_do_upgrade() {
 		fw_setenv upgrade_available 1
 		nand_do_upgrade "$1"
 		;;
-	compex,wpq873|\
-	edimax,cax1800|\
-	netgear,rax120v2|\
-	netgear,wax218|\
-	netgear,wax620|\
-	netgear,wax630)
-		nand_do_upgrade "$1"
-		;;
 	prpl,haze|\
 	qnap,301w)
 		kernelname="0:HLOS"
 		rootfsname="rootfs"
 		mmc_do_upgrade "$1"
 		;;
-	zyxel,nbg7815)
-		local config_mtdnum="$(find_mtd_index 0:bootconfig)"
-		[ -z "$config_mtdnum" ] && reboot
-		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
-		if [ "$part_num" -eq "0" ]; then
-			kernelname="0:HLOS"
-			rootfsname="rootfs"
-			mmc_do_upgrade "$1"
-		else
-			kernelname="0:HLOS_1"
-			rootfsname="rootfs_1"
-			mmc_do_upgrade "$1"
-		fi
-		;;
 	redmi,ax6|\
 	xiaomi,ax3600|\
 	xiaomi,ax9000)
@@ -125,6 +109,20 @@ platform_do_upgrade() {
 		fw_setenv upgrade_available 1
 		nand_do_upgrade "$1"
 		;;
+	zyxel,nbg7815)
+		local config_mtdnum="$(find_mtd_index 0:bootconfig)"
+		[ -z "$config_mtdnum" ] && reboot
+		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
+		if [ "$part_num" -eq "0" ]; then
+			kernelname="0:HLOS"
+			rootfsname="rootfs"
+			mmc_do_upgrade "$1"
+		else
+			kernelname="0:HLOS_1"
+			rootfsname="rootfs_1"
+			mmc_do_upgrade "$1"
+		fi
+		;;
 	*)
 		default_do_upgrade "$1"
 		;;