diff --git a/target/linux/ath79/dts/qca9563_tplink_deco-s4-v2.dts b/target/linux/ath79/dts/qca9563_tplink_deco-s4-v2.dts index 7cbc77f64b5..147a880de88 100644 --- a/target/linux/ath79/dts/qca9563_tplink_deco-s4-v2.dts +++ b/target/linux/ath79/dts/qca9563_tplink_deco-s4-v2.dts @@ -121,6 +121,10 @@ #address-cells = <1>; #size-cells = <1>; + cal_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + precal_art_5000: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; @@ -146,5 +150,6 @@ &wmac { status = "okay"; - qca,no-eeprom; + nvmem-cells = <&cal_art_1000>; + nvmem-cell-names = "calibration"; }; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 17639ad439e..675522823f6 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -58,11 +58,6 @@ case "$FIRMWARE" in caldata_extract "art" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env mac_addr) ;; - tplink,deco-s4-v2) - caldata_extract "art" 0x1000 0x440 - base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config)) - ath9k_patch_mac $(macaddr_add $base_mac 1) - ;; *) caldata_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 5155d240a82..b10599cc154 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -110,7 +110,8 @@ case "$board" in base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config)) [ "$PHYNBR" -eq 0 ] && \ macaddr_add $base_mac 2 > /sys${DEVPATH}/macaddress - + [ "$PHYNBR" -eq 1 ] && \ + macaddr_add $base_mac 1 > /sys${DEVPATH}/macaddress ;; trendnet,tew-823dru) # set the 2.4G interface mac address to LAN MAC