ralink: add xhci driver

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39328

target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c

@@ -0,0 +1,445 @@
+#include "mtk-phy.h"
+
+#ifdef CONFIG_PROJECT_7621
+#include "mtk-phy-7621.h"
+
+//not used on SoC
+PHY_INT32 phy_init(struct u3phy_info *info){	
+	return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
+	return PHY_TRUE;
+}
+
+//--------------------------------------------------------
+//    Function : fgEyeScanHelper_CheckPtInRegion()
+// Description : Check if the test point is in a rectangle region.
+//               If it is in the rectangle, also check if this point
+//               is on the multiple of deltaX and deltaY.
+//   Parameter : strucScanRegion * prEye - the region
+//               BYTE bX
+//               BYTE bY
+//      Return : BYTE - TRUE :  This point needs to be tested
+//                      FALSE:  This point will be omitted
+//        Note : First check within the rectangle.
+//               Secondly, use modulous to check if the point will be tested.
+//--------------------------------------------------------
+static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
+{
+  PHY_INT8 fgValid = true;
+
+
+  /// Be careful, the axis origin is on the TOP-LEFT corner.
+  /// Therefore the top-left point has the minimum X and Y
+  /// Botton-right point is the maximum X and Y
+  if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
+    && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
+  {
+    // With the region, now check whether or not the input test point is
+    // on the multiples of X and Y
+    // Do not have to worry about negative value, because we have already
+    // check the input bX, and bY is within the region.
+    if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
+      || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
+    {
+      // if the division will have remainder, that means
+      // the input test point is on the multiples of X and Y
+      fgValid = false;
+    }
+    else
+    {
+    }
+  }
+  else
+  {
+    
+    fgValid = false;
+  }
+  return fgValid;
+}
+
+//--------------------------------------------------------
+//    Function : EyeScanHelper_RunTest()
+// Description : Enable the test, and wait til it is completed
+//   Parameter : None
+//      Return : None
+//        Note : None
+//--------------------------------------------------------
+static void EyeScanHelper_RunTest(struct u3phy_info *info)
+{
+	DRV_UDELAY(100);
+	// Disable the test
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0);	//RG_SSUSB_RX_EYE_CNT_EN = 0
+	DRV_UDELAY(100);
+	// Run the test
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+  		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1);	//RG_SSUSB_RX_EYE_CNT_EN = 1
+	DRV_UDELAY(100);
+	// Wait til it's done
+	//RGS_SSUSB_RX_EYE_CNT_RDY
+	while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
+  		, RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
+}
+
+//--------------------------------------------------------
+//    Function : fgEyeScanHelper_CalNextPoint()
+// Description : Calcualte the test point for the measurement
+//   Parameter : None
+//      Return : BOOL - TRUE :  the next point is within the
+//                              boundaryof HW limit
+//                      FALSE:  the next point is out of the HW limit
+//        Note : The next point is obtained by calculating
+//               from the bottom left of the region rectangle
+//               and then scanning up until it reaches the upper
+//               limit. At this time, the x will increment, and
+//               start scanning downwards until the y hits the
+//               zero.
+//--------------------------------------------------------
+static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
+{
+  if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
+    || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
+        )
+  {
+    /// Reaches the limit of Y axis
+    /// Increment X
+    _bXcurr++;
+    _fgXChged = true;
+    _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
+
+    if (_bXcurr > MAX_X)
+    {
+      return false;
+    }
+  }
+  else
+  {
+    _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
+    _fgXChged = false;
+  }
+  return PHY_TRUE;
+}
+
+PHY_INT32 eyescan_init(struct u3phy_info *info){
+	//initial PHY setting
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
+		, RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);	
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
+		, RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+		, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);    //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+		, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);        //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
+	return PHY_TRUE;
+}
+
+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
+		, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
+	PHY_INT32 cOfst = 0;
+	PHY_UINT8 bIdxX = 0;
+	PHY_UINT8 bIdxY = 0;
+	//PHY_INT8 bCnt = 0;
+	PHY_UINT8 bIdxCycCnt = 0;
+	PHY_INT8 fgValid;
+	PHY_INT8 cX;
+	PHY_INT8 cY;
+	PHY_UINT8 bExtendCnt;
+	PHY_INT8 isContinue;
+	//PHY_INT8 isBreak;
+	PHY_UINT32 wErr0 = 0, wErr1 = 0;
+	//PHY_UINT32 temp;
+
+	PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+	PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+
+	_rEye1.bX_tl = x_t1;
+	_rEye1.bY_tl = y_t1;
+	_rEye1.bX_br = x_br;
+	_rEye1.bY_br = y_br;
+	_rEye1.bDeltaX = delta_x;
+	_rEye1.bDeltaY = delta_y;
+
+	_rEye2.bX_tl = x_t1;
+	_rEye2.bY_tl = y_t1;
+	_rEye2.bX_br = x_br;
+	_rEye2.bY_br = y_br;
+	_rEye2.bDeltaX = delta_x;
+	_rEye2.bDeltaY = delta_y;
+
+	_rTestCycle.wEyeCnt = eye_cnt;
+	_rTestCycle.bNumOfEyeCnt = num_cnt;
+	_rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
+	_rTestCycle.bPICalEn = PI_cal_en;	
+
+	_bXcurr = 0;
+	_bYcurr = 0;
+	_eScanDir = SCAN_DN;
+	_fgXChged = false;
+
+	printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
+		eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
+		x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);		
+
+	//force SIGDET to OFF
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+		, RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1);						//RG_SSUSB_RX_SIGDET_SEL = 1
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+		, RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0);						//RG_SSUSB_RX_SIGDET_EN = 0
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
+		, RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0);				//RG_SSUSB_RX_SIGDET = 0
+
+	// RX_TRI_DET_EN to Disable
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
+		, RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0);		//RG_SSUSB_RX_TRI_DET_EN = 0
+
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0);		//RG_SSUSB_RX_EYE_XOFFSET = 0
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0);				//RG_SSUSB_RX_EYE0_Y = 0
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0);				//RG_SSUSB_RX_EYE1_Y = 0
+
+
+	if (PI_cal_en){
+		// PI Calibration
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+			, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);	//RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
+
+		DRV_UDELAY(20);
+
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
+		_bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
+			, RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO);				//read RGS_SSUSB_RX_PILPO
+
+		printk(KERN_ERR "PI result: %d\n", _bPIResult);
+	}
+	// Read Initial DAC
+	// Set CYCLE
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
+		,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt);			//RG_SSUSB_RX_EYE_CNT
+
+	// Eye Monitor Feature
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
+		, RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff);		//RG_SSUSB_RX_EYE_MASK = 0x3ff
+	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1
+
+	// Move X,Y to the top-left corner
+	for (cOfst = 0; cOfst >= -64; cOfst--)
+	{
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
+	}
+	for (cOfst = 0; cOfst < 64; cOfst++)
+	{
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);			//RG_SSUSB_RX_EYE0_Y
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);			//RG_SSUSB_RX_EYE1_Y
+	}
+	//ClearErrorResult
+	for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
+		for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
+		{
+			for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
+				pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
+				pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
+			}
+		}
+	}
+	isContinue = true;
+	while(isContinue){
+		//printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
+		// The point is within the boundary, then let's check if it is within
+	    // the testing region.
+	    // The point is only test-able if one of the eye region
+	    // includes this point.
+	    fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
+           || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
+		// Translate bX and bY to 2's complement from where the origin was on the
+		// top left corner.
+		// 0x40 and 0x3F needs a bit of thinking!!!! >"<
+		cX = (_bXcurr ^ 0x40);
+		cY = (_bYcurr ^ 0x3F);
+
+		// Set X if necessary
+		if (_fgXChged == true)
+		{
+			U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+				, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX);		//RG_SSUSB_RX_EYE_XOFFSET
+		}
+		// Set Y
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY);			//RG_SSUSB_RX_EYE0_Y
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY);			//RG_SSUSB_RX_EYE1_Y
+
+		/// Test this point!
+		if (fgValid){
+			for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
+			{
+				//run test
+				EyeScanHelper_RunTest(info);
+			}
+			for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
+			{
+				EyeScanHelper_RunTest(info);
+				wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
+					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
+				wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
+					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
+
+				pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
+				pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
+
+				//EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
+//				printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
+//					, bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
+			}
+			//printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
+		}
+		else{
+			
+		}
+		if (fgEyeScanHelper_CalNextPoint() == false){
+#if 0
+			printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
+		 	printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
+#endif
+			printk(KERN_ERR "end of eye scan\n");
+		  	isContinue = false;
+		}
+	}
+	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
+		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
+		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
+
+	// Move X,Y to the top-left corner
+	for (cOfst = 63; cOfst >= 0; cOfst--)
+	{
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
+	}
+	for (cOfst = 63; cOfst >= 0; cOfst--)
+	{
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
+		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
+
+	}
+	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
+		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
+		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
+
+	printk(KERN_ERR "PI result: %d\n", _bPIResult);
+	printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
+	printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
+	
+	return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
+	return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
+	return PHY_TRUE;
+}
+
+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
+	PHY_INT32 i=0;
+	//PHY_INT32 j=0;
+	//PHY_INT8 u1SrCalVal = 0;
+	//PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
+	PHY_INT32 fgRet = 0;	
+	PHY_INT32 u4FmOut = 0;	
+	PHY_INT32 u4Tmp = 0;
+	//PHY_INT32 temp;
+
+	// => RG_USB20_HSTX_SRCAL_EN = 1
+	// enable HS TX SR calibration
+	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
+	DRV_MSLEEP(1);
+
+	// => RG_FRCK_EN = 1    
+	// Enable free run clock
+	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
+		, RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
+
+	// MT6290 HS signal quality patch
+	// => RG_CYCLECNT = 400
+	// Setting cyclecnt =400
+	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+		, RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
+
+	// => RG_FREQDET_EN = 1
+	// Enable frequency meter
+	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
+
+	// wait for FM detection done, set 10ms timeout
+	for(i=0; i<10; i++){
+		// => u4FmOut = USB_FM_OUT
+		// read FM_OUT
+		u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
+		printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
+
+		// check if FM detection done 
+		if (u4FmOut != 0)
+		{
+			fgRet = 0;
+			printk("FM detection done! loop = %d\n", i);
+			
+			break;
+		}
+
+		fgRet = 1;
+		DRV_MSLEEP(1);
+	}
+	// => RG_FREQDET_EN = 0
+	// disable frequency meter
+	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
+
+	// => RG_FRCK_EN = 0
+	// disable free run clock
+	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
+		, RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
+
+	// => RG_USB20_HSTX_SRCAL_EN = 0
+	// disable HS TX SR calibration
+	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
+	DRV_MSLEEP(1);
+
+	if(u4FmOut == 0){
+		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
+		
+		fgRet = 1;
+	}
+	else{
+		// set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
+		u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
+		printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
+		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
+	}
+	return fgRet;
+}
+
+#endif

target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c

@@ -0,0 +1,58 @@
+#include "mtk-phy.h"
+#ifdef CONFIG_U3D_HAL_SUPPORT
+#include "mu3d_hal_osal.h"
+#endif
+
+#ifdef CONFIG_U3_PHY_AHB_SUPPORT
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#ifndef CONFIG_U3D_HAL_SUPPORT
+#define os_writel(addr,data) {\
+		(*((volatile PHY_UINT32*)(addr)) = data);\
+	}
+#define os_readl(addr)  *((volatile PHY_UINT32*)(addr))
+#define os_writelmsk(addr, data, msk) \
+		{ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
+	}
+#define os_setmsk(addr, msk) \
+	{ os_writel(addr, os_readl(addr) | msk); \
+	}
+#define os_clrmsk(addr, msk) \
+   { os_writel(addr, os_readl(addr) &~ msk); \
+   }
+/*msk the data first, then umsk with the umsk.*/
+#define os_writelmskumsk(addr, data, msk, umsk) \
+{\
+   os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
+}
+
+#endif
+
+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
+{
+	os_writel(addr, data);
+
+	return 0;
+}
+
+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
+{
+	return os_readl(addr);
+}
+
+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
+{
+	os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
+	
+	return 0;
+}
+
+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
+{
+	return ((os_readl(addr)>>((addr%4)*8))&0xff);
+}
+
+#endif
+

target/linux/ramips/files/drivers/usb/host/mtk-phy.c

@@ -0,0 +1,102 @@
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#define U3_PHY_LIB
+#include "mtk-phy.h"
+#ifdef CONFIG_PROJECT_7621
+#include "mtk-phy-7621.h"
+#endif
+#ifdef CONFIG_PROJECT_PHY
+static struct u3phy_operator project_operators = {
+	.init = phy_init,
+	.change_pipe_phase = phy_change_pipe_phase,
+	.eyescan_init = eyescan_init,
+	.eyescan = phy_eyescan,
+	.u2_slew_rate_calibration = u2_slew_rate_calibration,
+};
+#endif
+
+
+PHY_INT32 u3phy_init(){
+#ifndef CONFIG_PROJECT_PHY
+	PHY_INT32 u3phy_version;
+#endif
+	
+	if(u3phy != NULL){
+		return PHY_TRUE;
+	}
+
+	u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+	u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
+#endif
+#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
+	u3phy->phyd_version_addr = 0x2000e4;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+	u3phy_p1->phyd_version_addr = 0x2000e4;
+#endif
+#else
+	u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+	u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
+#endif
+#endif
+
+#ifdef CONFIG_PROJECT_PHY
+
+	u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
+	u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
+	u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
+	u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
+	u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
+	u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;		
+	u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;	
+	u3phy_ops = &project_operators;
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+	u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
+	u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
+	u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
+	u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
+	u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
+	u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
+	u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
+#endif
+#endif
+
+	return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
+	PHY_INT8 cur_value;
+	PHY_INT8 new_value;
+
+	cur_value = U3PhyReadReg8(addr);
+	new_value = (cur_value & (~mask)) | (value << offset);
+	//udelay(i2cdelayus);
+	U3PhyWriteReg8(addr, new_value);
+	return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
+	PHY_INT32 cur_value;
+	PHY_INT32 new_value;
+
+	cur_value = U3PhyReadReg32(addr);
+	new_value = (cur_value & (~mask)) | ((value << offset) & mask);
+	U3PhyWriteReg32(addr, new_value);
+	//DRV_MDELAY(100);
+
+	return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
+	
+	return ((U3PhyReadReg8(addr) & mask) >> offset);
+}
+
+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
+
+	return ((U3PhyReadReg32(addr) & mask) >> offset);
+}
+

target/linux/ramips/files/drivers/usb/host/mtk-phy.h

@@ -0,0 +1,179 @@
+#ifndef __MTK_PHY_NEW_H
+#define __MTK_PHY_NEW_H
+
+//#define CONFIG_U3D_HAL_SUPPORT
+
+/* include system library */
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+/* Choose PHY R/W implementation */
+//#define CONFIG_U3_PHY_GPIO_SUPPORT	//SW I2C implemented by GPIO
+#define CONFIG_U3_PHY_AHB_SUPPORT	//AHB, only on SoC
+
+/* Choose PHY version */
+//Select your project by defining one of the followings
+#define CONFIG_PROJECT_7621 //7621
+#define CONFIG_PROJECT_PHY
+
+/* BASE ADDRESS DEFINE, should define this on ASIC */
+#define PHY_BASE		0xBE1D0000
+#define SIFSLV_FM_FEG_BASE	(PHY_BASE+0x100)
+#define SIFSLV_CHIP_BASE	(PHY_BASE+0x700)
+#define U2_PHY_BASE		(PHY_BASE+0x800)
+#define U3_PHYD_BASE		(PHY_BASE+0x900)
+#define U3_PHYD_B2_BASE		(PHY_BASE+0xa00)
+#define U3_PHYA_BASE		(PHY_BASE+0xb00)
+#define U3_PHYA_DA_BASE		(PHY_BASE+0xc00)
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#define SIFSLV_FM_FEG_BASE_P1	(PHY_BASE+0x100)
+#define SIFSLV_CHIP_BASE_P1	(PHY_BASE+0x700)
+#define U2_PHY_BASE_P1		(PHY_BASE+0x1000)
+#define U3_PHYD_BASE_P1		(PHY_BASE+0x1100)
+#define U3_PHYD_B2_BASE_P1	(PHY_BASE+0x1200)
+#define U3_PHYA_BASE_P1		(PHY_BASE+0x1300)
+#define U3_PHYA_DA_BASE_P1	(PHY_BASE+0x1400)
+#endif
+
+/*
+
+0x00000100	MODULE	ssusb_sifslv_fmreg	ssusb_sifslv_fmreg
+0x00000700	MODULE	ssusb_sifslv_ippc	ssusb_sifslv_ippc
+0x00000800	MODULE	ssusb_sifslv_u2phy_com	ssusb_sifslv_u2_phy_com_T28
+0x00000900	MODULE	ssusb_sifslv_u3phyd	ssusb_sifslv_u3phyd_T28
+0x00000a00	MODULE	ssusb_sifslv_u3phyd_bank2	ssusb_sifslv_u3phyd_bank2_T28
+0x00000b00	MODULE	ssusb_sifslv_u3phya	ssusb_sifslv_u3phya_T28
+0x00000c00	MODULE	ssusb_sifslv_u3phya_da	ssusb_sifslv_u3phya_da_T28
+*/
+
+
+/* TYPE DEFINE */
+typedef unsigned int	PHY_UINT32;
+typedef int				PHY_INT32;
+typedef	unsigned short	PHY_UINT16;
+typedef short			PHY_INT16;
+typedef unsigned char	PHY_UINT8;
+typedef char			PHY_INT8;
+
+typedef PHY_UINT32 __bitwise	PHY_LE32;
+
+/* CONSTANT DEFINE */
+#define PHY_FALSE	0
+#define PHY_TRUE	1
+
+/* MACRO DEFINE */
+#define DRV_WriteReg32(addr,data)       ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
+#define DRV_Reg32(addr)                 (*(volatile PHY_UINT32 *)(addr))
+
+#define DRV_MDELAY	mdelay
+#define DRV_MSLEEP	msleep
+#define DRV_UDELAY	udelay
+#define DRV_USLEEP	usleep
+
+/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
+
+/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
+PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
+
+struct u3phy_info {
+	PHY_INT32 phy_version;
+	PHY_INT32 phyd_version_addr;
+	
+#ifdef CONFIG_PROJECT_PHY	
+	struct u2phy_reg *u2phy_regs;
+	struct u3phya_reg *u3phya_regs;
+	struct u3phya_da_reg *u3phya_da_regs;
+	struct u3phyd_reg *u3phyd_regs;
+	struct u3phyd_bank2_reg *u3phyd_bank2_regs;
+	struct sifslv_chip_reg *sifslv_chip_regs;	
+	struct sifslv_fm_feg *sifslv_fm_regs;	
+#endif
+};
+
+struct u3phy_operator {
+	PHY_INT32 (*init) (struct u3phy_info *info);
+	PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
+	PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
+	PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
+	PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
+	PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
+	PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
+};
+
+#ifdef U3_PHY_LIB
+#define AUTOEXT
+#else
+#define AUTOEXT extern
+#endif
+
+AUTOEXT struct u3phy_info *u3phy;
+AUTOEXT struct u3phy_info *u3phy_p1;
+AUTOEXT struct u3phy_operator *u3phy_ops;
+
+/*********eye scan required*********/
+
+#define LO_BYTE(x)                   ((PHY_UINT8)((x) & 0xFF))
+#define HI_BYTE(x)                   ((PHY_UINT8)(((x) & 0xFF00) >> 8))
+
+typedef enum
+{
+  SCAN_UP,
+  SCAN_DN
+} enumScanDir;
+
+struct strucScanRegion
+{
+  PHY_INT8 bX_tl;
+  PHY_INT8 bY_tl;
+  PHY_INT8 bX_br;
+  PHY_INT8 bY_br;
+  PHY_INT8 bDeltaX;
+  PHY_INT8 bDeltaY;
+};
+
+struct strucTestCycle
+{
+  PHY_UINT16 wEyeCnt;
+  PHY_INT8 bNumOfEyeCnt;
+  PHY_INT8 bPICalEn;
+  PHY_INT8 bNumOfIgnoreCnt;
+};
+
+#define ERRCNT_MAX		128
+#define CYCLE_COUNT_MAX	15
+
+/// the map resolution is 128 x 128 pts
+#define MAX_X                 127
+#define MAX_Y                 127
+#define MIN_X                 0
+#define MIN_Y                 0
+
+PHY_INT32 u3phy_init(void);
+
+AUTOEXT struct strucScanRegion           _rEye1;
+AUTOEXT struct strucScanRegion           _rEye2;
+AUTOEXT struct strucTestCycle            _rTestCycle;
+AUTOEXT PHY_UINT8                      _bXcurr;
+AUTOEXT PHY_UINT8                      _bYcurr;
+AUTOEXT enumScanDir               _eScanDir;
+AUTOEXT PHY_INT8                      _fgXChged;
+AUTOEXT PHY_INT8                      _bPIResult;
+/* use local variable instead to save memory use */
+#if 0
+AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+#endif
+
+/***********************************/
+#endif
+

target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c

@@ -0,0 +1,115 @@
+#include "xhci-mtk.h"
+#include "xhci-mtk-power.h"
+#include "xhci.h"
+#include <linux/kernel.h>       /* printk() */
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+static int g_num_u3_port;
+static int g_num_u2_port;
+
+
+void enableXhciAllPortPower(struct xhci_hcd *xhci){
+	int i;
+	u32 port_id, temp;
+	u32 __iomem *addr;
+
+	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+	
+	for(i=1; i<=g_num_u3_port; i++){
+		port_id=i;
+		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
+		temp = xhci_readl(xhci, addr);
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= PORT_POWER;
+		xhci_writel(xhci, temp, addr);
+	}
+	for(i=1; i<=g_num_u2_port; i++){
+		port_id=i+g_num_u3_port;
+		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
+		temp = xhci_readl(xhci, addr);
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= PORT_POWER;
+		xhci_writel(xhci, temp, addr);
+	}
+}
+
+void enableAllClockPower(){
+
+	int i;
+	u32 temp;
+
+	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+
+	//2.	Enable xHC
+	writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
+	writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
+	writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+	
+	//1.	Enable target ports 
+	for(i=0; i<g_num_u3_port; i++){
+		temp = readl(SSUSB_U3_CTRL(i));
+		temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
+		writel(temp, SSUSB_U3_CTRL(i));
+	}
+	for(i=0; i<g_num_u2_port; i++){
+		temp = readl(SSUSB_U2_CTRL(i));
+		temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
+		writel(temp, SSUSB_U2_CTRL(i));
+	}
+	msleep(100);
+}
+
+
+//(X)disable clock/power of a port 
+//(X)if all ports are disabled, disable IP ctrl power
+//disable all ports and IP clock/power, this is just mention HW that the power/clock of port 
+//and IP could be disable if suspended.
+//If doesn't not disable all ports at first, the IP clock/power will never be disabled
+//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
+//port_index: port number
+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
+void disablePortClockPower(void){
+	int i;
+	u32 temp;
+
+	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+	
+	for(i=0; i<g_num_u3_port; i++){
+		temp = readl(SSUSB_U3_CTRL(i));
+		temp = temp | (SSUSB_U3_PORT_PDN);
+		writel(temp, SSUSB_U3_CTRL(i));
+	}
+	for(i=0; i<g_num_u2_port; i++){
+		temp = readl(SSUSB_U2_CTRL(i));
+		temp = temp | (SSUSB_U2_PORT_PDN);
+		writel(temp, SSUSB_U2_CTRL(i));
+	}
+	writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+}
+
+//if IP ctrl power is disabled, enable it
+//enable clock/power of a port
+//port_index: port number
+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
+void enablePortClockPower(int port_index, int port_rev){
+	int i;
+	u32 temp;
+	
+	writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+
+	if(port_rev == 0x3){
+		temp = readl(SSUSB_U3_CTRL(port_index));
+		temp = temp & (~SSUSB_U3_PORT_PDN);
+		writel(temp, SSUSB_U3_CTRL(port_index));
+	}
+	else if(port_rev == 0x2){
+		temp = readl(SSUSB_U2_CTRL(port_index));
+		temp = temp & (~SSUSB_U2_PORT_PDN);
+		writel(temp, SSUSB_U2_CTRL(port_index));
+	}
+}
+

target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h

@@ -0,0 +1,13 @@
+#ifndef _XHCI_MTK_POWER_H
+#define _XHCI_MTK_POWER_H
+
+#include <linux/usb.h>
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+void enableXhciAllPortPower(struct xhci_hcd *xhci);
+void enableAllClockPower(void);
+void disablePortClockPower(void);
+void enablePortClockPower(int port_index, int port_rev);
+
+#endif

target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c

@@ -0,0 +1,608 @@
+#include "xhci-mtk-scheduler.h"
+#include <linux/kernel.h>       /* printk() */
+
+static struct sch_ep **ss_out_eps[MAX_EP_NUM];
+static struct sch_ep **ss_in_eps[MAX_EP_NUM];
+static struct sch_ep **hs_eps[MAX_EP_NUM];	//including tt isoc
+static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
+
+
+int mtk_xhci_scheduler_init(void){
+	int i;
+
+	for(i=0; i<MAX_EP_NUM; i++){
+		ss_out_eps[i] = NULL;
+	}
+	for(i=0; i<MAX_EP_NUM; i++){
+		ss_in_eps[i] = NULL;
+	}
+	for(i=0; i<MAX_EP_NUM; i++){
+		hs_eps[i] = NULL;
+	}
+	for(i=0; i<MAX_EP_NUM; i++){
+		tt_intr_eps[i] = NULL;
+	}
+	return 0;
+}
+
+int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+	, int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
+	, int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
+
+	struct sch_ep **ep_array;
+	int i;
+
+	if(is_in && dev_speed == USB_SPEED_SUPER ){
+		ep_array = (struct sch_ep **)ss_in_eps;
+	}
+	else if(dev_speed == USB_SPEED_SUPER){
+		ep_array = (struct sch_ep **)ss_out_eps;
+	}
+	else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
+		ep_array = (struct sch_ep **)hs_eps;
+	}
+	else{
+		ep_array = (struct sch_ep **)tt_intr_eps;
+	}
+	for(i=0; i<MAX_EP_NUM; i++){
+		if(ep_array[i] == NULL){
+			tmp_ep->dev_speed = dev_speed;
+			tmp_ep->isTT = isTT;
+			tmp_ep->is_in = is_in;
+			tmp_ep->ep_type = ep_type;
+			tmp_ep->maxp = maxp;
+			tmp_ep->interval = interval;
+			tmp_ep->burst = burst;
+			tmp_ep->mult = mult;
+			tmp_ep->offset = offset;
+			tmp_ep->repeat = repeat;
+			tmp_ep->pkts = pkts;
+			tmp_ep->cs_count = cs_count;
+			tmp_ep->burst_mode = burst_mode;
+			tmp_ep->bw_cost = bw_cost;
+			tmp_ep->ep = ep;
+			ep_array[i] = tmp_ep;
+			return SCH_SUCCESS;
+		}
+	}
+	return SCH_FAIL;
+}
+
+int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
+	, int td_size){
+	int i, j, k;
+	int bw_required[3];
+	int final_bw_required;
+	int bw_required_per_repeat;
+	int tmp_bw_required;
+	struct sch_ep *cur_sch_ep;
+	struct sch_ep **ep_array;
+	int cur_offset;
+	int cur_ep_offset;
+	int tmp_offset;
+	int tmp_interval;
+	int ep_offset;
+	int ep_interval;
+	int ep_repeat;
+	int ep_mult;
+	
+	if(is_in){
+		ep_array = (struct sch_ep **)ss_in_eps;
+	}
+	else{
+		ep_array = (struct sch_ep **)ss_out_eps;
+	}
+	
+	bw_required[0] = 0;
+	bw_required[1] = 0;
+	bw_required[2] = 0;
+	
+	if(repeat == 0){
+		final_bw_required = 0;
+		for(i=0; i<MAX_EP_NUM; i++){
+			cur_sch_ep = ep_array[i];
+			if(cur_sch_ep == NULL){
+				continue;
+			}
+			ep_interval = cur_sch_ep->interval;
+			ep_offset = cur_sch_ep->offset;
+			if(cur_sch_ep->repeat == 0){
+				if(ep_interval >= interval){
+					tmp_offset = ep_offset + ep_interval - offset;
+					tmp_interval = interval;
+				}
+				else{
+					tmp_offset = offset + interval - ep_offset;
+					tmp_interval = ep_interval;
+				}
+				if(tmp_offset % tmp_interval == 0){
+					final_bw_required += cur_sch_ep->bw_cost;
+				}
+			}
+			else{
+				ep_repeat = cur_sch_ep->repeat;
+				ep_mult = cur_sch_ep->mult;
+				for(k=0; k<=ep_mult; k++){
+					cur_ep_offset = ep_offset+(k*ep_mult);
+					if(ep_interval >= interval){
+						tmp_offset = cur_ep_offset + ep_interval - offset;
+						tmp_interval = interval;
+					}
+					else{
+						tmp_offset = offset + interval - cur_ep_offset;
+						tmp_interval = ep_interval;
+					}
+					if(tmp_offset % tmp_interval == 0){
+						final_bw_required += cur_sch_ep->bw_cost;
+						break;
+					}
+				}
+			}
+		}
+		final_bw_required += td_size;
+	}
+	else{
+		bw_required_per_repeat = maxp * (burst+1);
+		for(j=0; j<=mult; j++){
+			tmp_bw_required = 0;
+			cur_offset = offset+(j*repeat);
+			for(i=0; i<MAX_EP_NUM; i++){
+				cur_sch_ep = ep_array[i];
+				if(cur_sch_ep == NULL){
+					continue;
+				}
+				ep_interval = cur_sch_ep->interval;
+				ep_offset = cur_sch_ep->offset;
+				if(cur_sch_ep->repeat == 0){
+					if(ep_interval >= interval){
+						tmp_offset = ep_offset + ep_interval - cur_offset;
+						tmp_interval = interval;
+					}
+					else{
+						tmp_offset = cur_offset + interval - ep_offset;
+						tmp_interval = ep_interval;
+					}
+					if(tmp_offset % tmp_interval == 0){
+						tmp_bw_required += cur_sch_ep->bw_cost;
+					}
+				}
+				else{
+					ep_repeat = cur_sch_ep->repeat;
+					ep_mult = cur_sch_ep->mult;
+					for(k=0; k<=ep_mult; k++){
+						cur_ep_offset = ep_offset+(k*ep_repeat);
+						if(ep_interval >= interval){
+							tmp_offset = cur_ep_offset + ep_interval - cur_offset;
+							tmp_interval = interval;
+						}
+						else{
+							tmp_offset = cur_offset + interval - cur_ep_offset;
+							tmp_interval = ep_interval;
+						}
+						if(tmp_offset % tmp_interval == 0){
+							tmp_bw_required += cur_sch_ep->bw_cost;
+							break;
+						}
+					}
+				}
+			}
+			bw_required[j] = tmp_bw_required;
+		}
+		final_bw_required = SS_BW_BOUND;
+		for(j=0; j<=mult; j++){
+			if(bw_required[j] < final_bw_required){
+				final_bw_required = bw_required[j];
+			}
+		}
+		final_bw_required += bw_required_per_repeat;
+	}
+	return final_bw_required;
+}
+
+int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
+	int i;
+	int bw_required;
+	struct sch_ep *cur_sch_ep;
+	int tmp_offset;
+	int tmp_interval;
+	int ep_offset;
+	int ep_interval;
+	int cur_tt_isoc_interval;	//for isoc tt check
+	
+	bw_required = 0;
+	for(i=0; i<MAX_EP_NUM; i++){
+		
+		cur_sch_ep = (struct sch_ep *)hs_eps[i];
+		if(cur_sch_ep == NULL){
+				continue;
+		}
+		ep_offset = cur_sch_ep->offset;
+		ep_interval = cur_sch_ep->interval;
+		
+		if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
+			cur_tt_isoc_interval = ep_interval<<3;
+			if(ep_interval >= interval){
+				tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
+				tmp_interval = interval;
+			}
+			else{
+				tmp_offset = offset + interval - ep_offset;
+				tmp_interval = cur_tt_isoc_interval;
+			}
+			if(cur_sch_ep->is_in){
+				if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
+					bw_required += 188;
+				}
+			}
+			else{
+				if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
+					bw_required += 188;
+				}
+			}
+		}
+		else{
+			if(ep_interval >= interval){
+				tmp_offset = ep_offset + ep_interval - offset;
+				tmp_interval = interval;
+			}
+			else{
+				tmp_offset = offset + interval - ep_offset;
+				tmp_interval = ep_interval;
+			}
+			if(tmp_offset%tmp_interval == 0){
+				bw_required += cur_sch_ep->bw_cost;
+			}
+		}
+	}
+	bw_required += td_size;
+	return bw_required;
+}
+
+int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
+	char is_cs;
+	int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
+	int bw_required, max_bw;
+	int ss_cs_count;
+	int cs_mframe;
+	int max_frame;
+	int i,j;
+	struct sch_ep *cur_sch_ep;
+	int ep_offset;
+	int ep_interval;
+	int ep_cs_count;
+	int tt_isoc_interval;	//for isoc tt check
+	int cur_tt_isoc_interval;	//for isoc tt check
+	int tmp_offset;
+	int tmp_interval;
+	
+	is_cs = 0;
+	
+	tt_isoc_interval = interval<<3;	//frame to mframe
+	if(is_in){
+		is_cs = 1;
+	}
+	s_frame = offset/8;
+	s_mframe = offset%8;
+	ss_cs_count = (maxp + (188 - 1))/188;
+	if(is_cs){
+		cs_mframe = offset%8 + 2 + ss_cs_count;
+		if (cs_mframe <= 6)
+			ss_cs_count += 2;
+		else if (cs_mframe == 7)
+			ss_cs_count++;
+		else if (cs_mframe > 8)
+			return -1;
+	}
+	max_bw = 0;
+	if(is_in){
+		i=2;
+	}
+	for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
+		bw_required = 0;
+		for(j=0; j<MAX_EP_NUM; j++){
+			cur_sch_ep = (struct sch_ep *)hs_eps[j];
+			if(cur_sch_ep == NULL){
+				continue;
+			}
+			ep_offset = cur_sch_ep->offset;
+			ep_interval = cur_sch_ep->interval;
+			if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
+				//isoc tt
+				//check if mframe offset overlap
+				//if overlap, add 188 to the bw
+				cur_tt_isoc_interval = ep_interval<<3;
+				if(cur_tt_isoc_interval >= tt_isoc_interval){
+					tmp_offset = (ep_offset+cur_tt_isoc_interval)  - cur_mframe;
+					tmp_interval = tt_isoc_interval;
+				}
+				else{
+					tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
+					tmp_interval = cur_tt_isoc_interval;
+				}
+				if(cur_sch_ep->is_in){
+					if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
+						bw_required += 188;
+					}
+				}
+				else{
+					if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
+						bw_required += 188;
+					}
+				}
+				
+			}
+			else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
+				//check if mframe
+				if(ep_interval >= tt_isoc_interval){
+					tmp_offset = (ep_offset+ep_interval) - cur_mframe;
+					tmp_interval = tt_isoc_interval;
+				}
+				else{
+					tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
+					tmp_interval = ep_interval;
+				}
+				if(tmp_offset%tmp_interval == 0){
+					bw_required += cur_sch_ep->bw_cost;
+				}
+			}
+		}
+		bw_required += 188;
+		if(bw_required > max_bw){
+			max_bw = bw_required;
+		}
+	}
+	return max_bw;
+}
+
+int count_tt_intr_bw(int interval, int frame_offset){
+	//check all eps in tt_intr_eps
+	int ret;
+	int i,j;
+	int ep_offset;
+	int ep_interval;
+	int tmp_offset;
+	int tmp_interval;
+	ret = SCH_SUCCESS;
+	struct sch_ep *cur_sch_ep;
+	
+	for(i=0; i<MAX_EP_NUM; i++){
+		cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
+		if(cur_sch_ep == NULL){
+			continue;
+		}
+		ep_offset = cur_sch_ep->offset;
+		ep_interval = cur_sch_ep->interval;
+		if(ep_interval  >= interval){
+			tmp_offset = ep_offset + ep_interval - frame_offset;
+			tmp_interval = interval;
+		}
+		else{
+			tmp_offset = frame_offset + interval - ep_offset;
+			tmp_interval = ep_interval;
+		}
+		
+		if(tmp_offset%tmp_interval==0){
+			return SCH_FAIL;
+		}
+	}
+	return SCH_SUCCESS;
+}
+
+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
+	int i;
+	struct sch_ep **ep_array;
+	struct sch_ep *cur_ep;
+
+	if (is_in && dev_speed == USB_SPEED_SUPER) {
+		ep_array = (struct sch_ep **)ss_in_eps;
+	}
+	else if (dev_speed == USB_SPEED_SUPER) {
+		ep_array = (struct sch_ep **)ss_out_eps;
+	}
+	else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
+		ep_array = (struct sch_ep **)hs_eps;
+	}
+	else {
+		ep_array = (struct sch_ep **)tt_intr_eps;
+	}
+	for (i = 0; i < MAX_EP_NUM; i++) {
+		cur_ep = (struct sch_ep *)ep_array[i];
+		if(cur_ep != NULL && cur_ep->ep == ep){
+			ep_array[i] = NULL;
+			return cur_ep;
+		}
+	}
+	return NULL;
+}
+
+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+	, int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
+	mtk_u32 bPkts = 0;
+	mtk_u32 bCsCount = 0;
+	mtk_u32 bBm = 1;
+	mtk_u32 bOffset = 0;
+	mtk_u32 bRepeat = 0;
+	int ret;
+	struct mtk_xhci_ep_ctx *temp_ep_ctx;
+	int td_size;
+	int mframe_idx, frame_idx;
+	int bw_cost;
+	int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
+	int cur_offset, cs_mframe;
+	int break_out;
+	int frame_interval;
+
+	printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
+		, interval, burst, mult, ep, ep_ctx, sch_ep);
+	if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
+		frame_interval = interval >> 3;
+		for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
+			printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
+			if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
+				printk(KERN_ERR "check OK............\n");
+				bOffset = frame_idx<<3;
+				bPkts = 1;
+				bCsCount = 3;
+				bw_cost = maxp;
+				bRepeat = 0;
+				if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
+					, bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
+					return SCH_FAIL;
+				}
+				ret = SCH_SUCCESS;
+				break;
+			}
+		}
+	}
+	else if(isTT && ep_type == USB_EP_ISOC){
+		best_bw = HS_BW_BOUND;
+		best_bw_idx = -1;
+		cur_bw = 0;
+		td_size = maxp;
+		break_out = 0;
+		frame_interval = interval>>3;
+		for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
+			for(mframe_idx=0; mframe_idx<8; mframe_idx++){
+				cur_offset = (frame_idx*8) + mframe_idx;
+				cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
+				if(cur_bw > 0 && cur_bw < best_bw){
+					best_bw_idx = cur_offset;
+					best_bw = cur_bw;
+					if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
+						break_out = 1;
+						break;
+					}
+				}
+			}
+		}
+		if(best_bw_idx == -1){
+			return SCH_FAIL;
+		}
+		else{
+			bOffset = best_bw_idx;
+			bPkts = 1;
+			bCsCount = (maxp + (188 - 1)) / 188;
+			if(is_in){
+				cs_mframe = bOffset%8 + 2 + bCsCount;
+				if (cs_mframe <= 6)
+					bCsCount += 2;
+				else if (cs_mframe == 7)
+					bCsCount++;
+			}
+			bw_cost = 188;
+			bRepeat = 0;
+			if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+				return SCH_FAIL;
+			}
+			ret = SCH_SUCCESS;
+		}
+	}
+	else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
+		bPkts = 1;
+		ret = SCH_SUCCESS;
+	}
+	else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
+		bPkts = 1;
+		ret = SCH_SUCCESS;
+	}
+	else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
+		best_bw = HS_BW_BOUND;
+		best_bw_idx = -1;
+		cur_bw = 0;
+		td_size = maxp*(burst+1);
+		for(cur_offset = 0; cur_offset<interval; cur_offset++){
+			cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
+			if(cur_bw > 0 && cur_bw < best_bw){
+				best_bw_idx = cur_offset;
+				best_bw = cur_bw;
+				if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
+					break;
+				}
+			}
+		}
+		if(best_bw_idx == -1){
+			return SCH_FAIL;
+		}
+		else{
+			bOffset = best_bw_idx;
+			bPkts = burst + 1;
+			bCsCount = 0;
+			bw_cost = td_size;
+			bRepeat = 0;
+			if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+				return SCH_FAIL;
+			}
+			ret = SCH_SUCCESS;
+		}
+	}
+	else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
+		best_bw = SS_BW_BOUND;
+		best_bw_idx = -1;
+		cur_bw = 0;
+		td_size = maxp * (mult+1) * (burst+1);
+		if(mult == 0){
+			max_repeat = 0;
+		}
+		else{
+			max_repeat = (interval-1)/(mult+1);
+		}
+		break_out = 0;
+		for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
+			for(repeat = max_repeat; repeat >= 0; repeat--){
+				cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
+					, repeat, td_size);
+				printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
+					, frame_idx, repeat, td_size, cur_bw);
+				if(cur_bw > 0 && cur_bw < best_bw){
+					best_bw_idx = frame_idx;
+					best_bw_repeat = repeat;
+					best_bw = cur_bw;
+					if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
+						break_out = 1;
+						break;
+					}
+				}
+			}
+		}
+		printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
+		if(best_bw_idx == -1){
+			return SCH_FAIL;
+		}
+		else{
+			bOffset = best_bw_idx;
+			bCsCount = 0;
+			bRepeat = best_bw_repeat;
+			if(bRepeat == 0){
+				bw_cost = (burst+1)*(mult+1)*maxp;
+				bPkts = (burst+1)*(mult+1);
+			}
+			else{
+				bw_cost = (burst+1)*maxp;
+				bPkts = (burst+1);
+			}
+			if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+				return SCH_FAIL;
+			}
+			ret = SCH_SUCCESS;
+		}
+	}
+	else{
+		bPkts = 1;
+		ret = SCH_SUCCESS;
+	}
+	if(ret == SCH_SUCCESS){
+		temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
+		temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
+		temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
+
+		printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
+		printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
+		return SCH_SUCCESS;
+	}
+	else{
+		return SCH_FAIL;
+	}
+}

target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h

@@ -0,0 +1,77 @@
+#ifndef _XHCI_MTK_SCHEDULER_H
+#define _XHCI_MTK_SCHEDULER_H
+
+#define MTK_SCH_NEW		1
+
+#define SCH_SUCCESS		1
+#define SCH_FAIL		0
+
+#define MAX_EP_NUM		64
+#define SS_BW_BOUND		51000
+#define HS_BW_BOUND		6144
+
+#define USB_EP_CONTROL		0
+#define USB_EP_ISOC		1
+#define USB_EP_BULK		2
+#define USB_EP_INT		3
+
+#define USB_SPEED_LOW		1
+#define USB_SPEED_FULL		2
+#define USB_SPEED_HIGH		3
+#define USB_SPEED_SUPER		5
+
+/* mtk scheduler bitmasks */
+#define BPKTS(p)		((p) & 0x3f)
+#define BCSCOUNT(p)		(((p) & 0x7) << 8)
+#define BBM(p)			((p) << 11)
+#define BOFFSET(p)		((p) & 0x3fff)
+#define BREPEAT(p)		(((p) & 0x7fff) << 16)
+
+
+#if 1
+typedef unsigned int mtk_u32;
+typedef unsigned long long mtk_u64;
+#endif
+
+#define NULL ((void *)0)
+
+struct mtk_xhci_ep_ctx {
+	mtk_u32	ep_info;
+	mtk_u32	ep_info2;
+	mtk_u64	deq;
+	mtk_u32	tx_info;
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	mtk_u32	reserved[3];
+};
+
+
+struct sch_ep
+{
+	//device info
+	int dev_speed;
+	int isTT;
+	//ep info
+	int is_in;
+	int ep_type;
+	int maxp;
+	int interval;
+	int burst;
+	int mult;
+	//scheduling info
+	int offset;
+	int repeat;
+	int pkts;
+	int cs_count;
+	int burst_mode;
+	//other
+	int bw_cost;	//bandwidth cost in each repeat; including overhead
+	mtk_u32 *ep;		//address of usb_endpoint pointer
+};
+
+int mtk_xhci_scheduler_init(void);
+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+	, int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
+
+
+#endif

target/linux/ramips/files/drivers/usb/host/xhci-mtk.c

@@ -0,0 +1,265 @@
+#include "xhci-mtk.h"
+#include "xhci-mtk-power.h"
+#include "xhci.h"
+#include "mtk-phy.h"
+#ifdef CONFIG_C60802_SUPPORT
+#include "mtk-phy-c60802.h"
+#endif
+#include "xhci-mtk-scheduler.h"
+#include <linux/kernel.h>       /* printk() */
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+void setInitialReg(void )
+{
+	__u32 __iomem *addr;
+	u32 temp;
+
+	/* set SSUSB DMA burst size to 128B */
+	addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
+	temp = SSUSB_HDMA_CFG_MT7621_VALUE;
+	writel(temp, addr);
+
+	/* extend U3 LTSSM Polling.LFPS timeout value */
+	addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
+	temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
+	writel(temp, addr);
+
+	/* EOF */
+	addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
+	temp = SYNC_HS_EOF_VALUE;
+	writel(temp, addr);
+
+#if defined (CONFIG_PERIODIC_ENP)
+	/* HSCH_CFG1: SCH2_FIFO_DEPTH */
+	addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
+	temp = readl(addr);
+	temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
+	writel(temp, addr);
+#endif
+
+	/* Doorbell handling */
+	addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
+	temp = 0x1;
+	writel(temp, addr);
+
+	/* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
+	/* Port 0 */
+	addr = U2_PHY_BASE + U2_PHYD_CR1;
+	temp = readl(addr);
+	temp &= ~(0x3 << 18);
+	temp |= (1 << 18);
+	writel(temp, addr);
+
+	/* Port 1 */
+	addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
+	temp = readl(addr);
+	temp &= ~(0x3 << 18);
+	temp |= (1 << 18);
+	writel(temp, addr);
+}
+
+
+void setLatchSel(void){
+	__u32 __iomem *latch_sel_addr;
+	u32 latch_sel_value;
+	latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
+	latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
+	writel(latch_sel_value, latch_sel_addr);
+}
+
+void reinitIP(void){
+	__u32 __iomem *ip_reset_addr;
+	u32 ip_reset_value;
+
+	enableAllClockPower();
+	mtk_xhci_scheduler_init();
+}
+
+void dbg_prb_out(void){
+	mtk_probe_init(0x0f0f0f0f);
+	mtk_probe_out(0xffffffff);
+	mtk_probe_out(0x01010101);
+	mtk_probe_out(0x02020202);
+	mtk_probe_out(0x04040404);
+	mtk_probe_out(0x08080808);
+	mtk_probe_out(0x10101010);
+	mtk_probe_out(0x20202020);
+	mtk_probe_out(0x40404040);
+	mtk_probe_out(0x80808080);
+	mtk_probe_out(0x55555555);
+	mtk_probe_out(0xaaaaaaaa);
+}
+
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+#define RET_SUCCESS 0
+#define RET_FAIL 1
+
+static int dbg_u3w(int argc, char**argv)
+{
+	int u4TimingValue;
+	char u1TimingValue;
+	int u4TimingAddress;
+
+	if (argc<3)
+    {
+        printk(KERN_ERR "Arg: address value\n");
+        return RET_FAIL;
+    }
+	u3phy_init();
+	
+	u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
+	u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
+	u1TimingValue = u4TimingValue & 0xff;
+	/* access MMIO directly */
+	writel(u1TimingValue, u4TimingAddress);
+	printk(KERN_ERR "Write done\n");
+	return RET_SUCCESS;
+	
+}
+
+static int dbg_u3r(int argc, char**argv)
+{
+	char u1ReadTimingValue;
+	int u4TimingAddress;
+	if (argc<2)
+    {
+        printk(KERN_ERR "Arg: address\n");
+        return 0;
+    }
+	u3phy_init();
+	mdelay(500);
+	u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
+	/* access MMIO directly */
+	u1ReadTimingValue = readl(u4TimingAddress);
+	printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
+	return 0;
+}
+
+static int dbg_u3init(int argc, char**argv)
+{
+	int ret;
+	ret = u3phy_init();
+	printk(KERN_ERR "phy registers and operations initial done\n");
+	if(u3phy_ops->u2_slew_rate_calibration){
+		u3phy_ops->u2_slew_rate_calibration(u3phy);
+	}
+	else{
+		printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
+	}
+	if(u3phy_ops->init(u3phy) == PHY_TRUE)
+		return RET_SUCCESS;
+	return RET_FAIL;
+}
+
+void dbg_setU1U2(int argc, char**argv){
+	struct xhci_hcd *xhci;
+	int u1_value;
+	int u2_value;
+	u32 port_id, temp;
+	u32 __iomem *addr;
+	
+	if (argc<3)
+    {
+        printk(KERN_ERR "Arg: u1value u2value\n");
+        return RET_FAIL;
+    }
+
+	u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
+	u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
+	addr = (SSUSB_U3_XHCI_BASE + 0x424);
+	temp = readl(addr);
+	temp = temp & (~(0x0000ffff));
+	temp = temp | u1_value | (u2_value<<8);
+	writel(temp, addr);
+}
+///////////////////////////////////////////////////////////////////////////////
+
+int call_function(char *buf)
+{
+	int i;
+	int argc;
+	char *argv[80];
+
+	argc = 0;
+	do
+	{
+		argv[argc] = strsep(&buf, " ");
+		printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
+		argc++;
+	} while (buf);
+	if (!strcmp("dbg.r", argv[0]))
+		dbg_prb_out();
+	else if (!strcmp("dbg.u3w", argv[0]))
+		dbg_u3w(argc, argv);
+	else if (!strcmp("dbg.u3r", argv[0]))
+		dbg_u3r(argc, argv);
+	else if (!strcmp("dbg.u3i", argv[0]))
+		dbg_u3init(argc, argv);
+	else if (!strcmp("pw.u1u2", argv[0]))
+		dbg_setU1U2(argc, argv);
+	return 0;
+}
+
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	char w_buf[200];
+	char r_buf[200] = "this is a test";
+	int len = 200;
+
+	switch (cmd) {
+		case IOCTL_READ:
+			copy_to_user((char *) arg, r_buf, len);
+			printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
+			break;
+		case IOCTL_WRITE:
+			copy_from_user(w_buf, (char *) arg, len);
+			printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
+
+			//invoke function
+			return call_function(w_buf);
+			break;
+		default:
+			return -ENOTTY;
+	}
+
+	return len;
+}
+
+int xhci_mtk_test_open(struct inode *inode, struct file *file)
+{
+
+    printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
+    return 0;
+}
+
+int xhci_mtk_test_release(struct inode *inode, struct file *file)
+{
+
+    printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
+    return 0;
+}
+
+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
+{
+
+    printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
+    return 0;
+}
+
+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
+{
+
+    printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
+    return 0;
+}
+
+
+
+

target/linux/ramips/files/drivers/usb/host/xhci-mtk.h

@@ -0,0 +1,120 @@
+#ifndef _XHCI_MTK_H
+#define _XHCI_MTK_H
+
+#include <linux/usb.h>
+#include "xhci.h"
+
+#define SSUSB_U3_XHCI_BASE		0xBE1C0000
+#define SSUSB_U3_MAC_BASE		0xBE1C2400
+#define SSUSB_U3_SYS_BASE		0xBE1C2600
+#define SSUSB_U2_SYS_BASE		0xBE1C3400
+#define SSUB_SIF_SLV_TOP		0xBE1D0000
+#define SIFSLV_IPPC			(SSUB_SIF_SLV_TOP + 0x700)
+
+#define U3_PIPE_LATCH_SEL_ADD 		SSUSB_U3_MAC_BASE + 0x130
+#define U3_PIPE_LATCH_TX		0
+#define U3_PIPE_LATCH_RX		0
+
+#define U3_UX_EXIT_LFPS_TIMING_PAR	0xa0
+#define U3_REF_CK_PAR			0xb0
+#define U3_RX_UX_EXIT_LFPS_REF_OFFSET	8
+#define U3_RX_UX_EXIT_LFPS_REF		3
+#define	U3_REF_CK_VAL			10
+
+#define U3_TIMING_PULSE_CTRL		0xb4
+#define CNT_1US_VALUE			63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
+
+#define USB20_TIMING_PARAMETER		0x40
+#define TIME_VALUE_1US			63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
+
+#define LINK_PM_TIMER			0x8
+#define PM_LC_TIMEOUT_VALUE		3
+
+#define XHCI_IMOD			0x624
+#define XHCI_IMOD_MT7621_VALUE		0x10
+
+#define SSUSB_HDMA_CFG			0x950
+#define SSUSB_HDMA_CFG_MT7621_VALUE	0x10E0E0C
+
+#define U3_LTSSM_TIMING_PARAMETER3		0x2514
+#define U3_LTSSM_TIMING_PARAMETER3_VALUE	0x3E8012C
+
+#define U2_PHYD_CR1			0x64
+
+#define SSUSB_IP_SPAR0			0xC8
+
+#define SYNC_HS_EOF			0x938
+#define SYNC_HS_EOF_VALUE		0x201F3
+
+#define HSCH_CFG1			0x960
+#define SCH2_FIFO_DEPTH_OFFSET		16
+
+
+#define SSUSB_IP_PW_CTRL		(SIFSLV_IPPC+0x0)
+#define SSUSB_IP_SW_RST			(1<<0)
+#define SSUSB_IP_PW_CTRL_1		(SIFSLV_IPPC+0x4)
+#define SSUSB_IP_PDN			(1<<0)
+#define SSUSB_U3_CTRL(p)		(SIFSLV_IPPC+0x30+(p*0x08))
+#define SSUSB_U3_PORT_DIS		(1<<0)
+#define SSUSB_U3_PORT_PDN		(1<<1)
+#define SSUSB_U3_PORT_HOST_SEL		(1<<2)
+#define SSUSB_U3_PORT_CKBG_EN		(1<<3)
+#define SSUSB_U3_PORT_MAC_RST		(1<<4)
+#define SSUSB_U3_PORT_PHYD_RST		(1<<5)
+#define SSUSB_U2_CTRL(p)		(SIFSLV_IPPC+(0x50)+(p*0x08))
+#define SSUSB_U2_PORT_DIS		(1<<0)
+#define SSUSB_U2_PORT_PDN		(1<<1)
+#define SSUSB_U2_PORT_HOST_SEL		(1<<2)
+#define SSUSB_U2_PORT_CKBG_EN		(1<<3)
+#define SSUSB_U2_PORT_MAC_RST		(1<<4)
+#define SSUSB_U2_PORT_PHYD_RST		(1<<5)
+#define SSUSB_IP_CAP			(SIFSLV_IPPC+0x024)
+
+#define SSUSB_U3_PORT_NUM(p)		(p & 0xff)
+#define SSUSB_U2_PORT_NUM(p)		((p>>8) & 0xff)
+
+
+#define XHCI_MTK_TEST_MAJOR		234
+#define DEVICE_NAME			"xhci_mtk_test"
+
+#define CLI_MAGIC			'CLI'
+#define IOCTL_READ			_IOR(CLI_MAGIC, 0, int)
+#define IOCTL_WRITE			_IOW(CLI_MAGIC, 1, int)
+
+void reinitIP(void);
+void setInitialReg(void);
+void dbg_prb_out(void);
+int call_function(char *buf);
+
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+int xhci_mtk_test_open(struct inode *inode, struct file *file);
+int xhci_mtk_test_release(struct inode *inode, struct file *file);
+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
+
+/*
+  mediatek probe out
+*/
+/************************************************************************************/
+
+#define SW_PRB_OUT_ADDR		(SIFSLV_IPPC+0xc0)
+#define PRB_MODULE_SEL_ADDR	(SIFSLV_IPPC+0xbc)
+
+static inline void mtk_probe_init(const u32 byte){
+	__u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
+	writel(byte, ptr);
+}
+
+static inline void mtk_probe_out(const u32 value){
+	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
+	writel(value, ptr);
+}
+
+static inline u32 mtk_probe_value(void){
+	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
+
+	return readl(ptr);
+}
+
+
+#endif

target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch

@@ -0,0 +1,862 @@
+Index: linux-3.10.26/drivers/usb/core/hub.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/core/hub.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/core/hub.c	2014-01-19 16:29:18.548615960 +0000
+@@ -1259,7 +1259,7 @@
+ 	if (type != HUB_SUSPEND) {
+ 		/* Disconnect all the children */
+ 		for (i = 0; i < hdev->maxchild; ++i) {
+-			if (hub->ports[i]->child)
++			if (hub->ports[i] && hub->ports[i]->child)
+ 				usb_disconnect(&hub->ports[i]->child);
+ 		}
+ 	}
+Index: linux-3.10.26/drivers/usb/core/port.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/core/port.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/core/port.c	2014-01-19 16:29:18.548615960 +0000
+@@ -193,6 +193,7 @@
+ void usb_hub_remove_port_device(struct usb_hub *hub,
+ 				       int port1)
+ {
+-	device_unregister(&hub->ports[port1 - 1]->dev);
++	if (hub->ports[port1 - 1])
++		device_unregister(&hub->ports[port1 - 1]->dev);
+ }
+ 
+Index: linux-3.10.26/drivers/usb/host/Kconfig
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/Kconfig	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/Kconfig	2014-01-19 16:29:18.548615960 +0000
+@@ -28,7 +28,11 @@
+ if USB_XHCI_HCD
+ 
+ config USB_XHCI_PLATFORM
+-	tristate
++	bool "xHCI platform"
++
++config USB_MT7621_XHCI_PLATFORM
++	bool "MTK MT7621 xHCI"
++	depends on USB_XHCI_PLATFORM
+ 
+ config USB_XHCI_HCD_DEBUGGING
+ 	bool "Debugging for the xHCI host controller"
+Index: linux-3.10.26/drivers/usb/host/Makefile
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/Makefile	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/Makefile	2014-01-19 16:30:54.964617843 +0000
+@@ -13,15 +13,23 @@
+ 
+ xhci-hcd-y := xhci.o xhci-mem.o
+ xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ xhci-hcd-$(CONFIG_PCI)	+= xhci-pci.o
++endif
++
++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
++endif
+ 
+ ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
+-	xhci-hcd-y		+= xhci-plat.o
++xhci-hcd-y		+= xhci-plat.o
+ endif
+ 
+ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
+ 
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_PCI)		+= pci-quirks.o
++endif
+ 
+ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+ obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
+Index: linux-3.10.26/drivers/usb/host/pci-quirks.h
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/pci-quirks.h	2014-01-19 16:29:17.392615927 +0000
++++ linux-3.10.26/drivers/usb/host/pci-quirks.h	2014-01-19 16:29:18.548615960 +0000
+@@ -1,7 +1,7 @@
+ #ifndef __LINUX_USB_PCI_QUIRKS_H
+ #define __LINUX_USB_PCI_QUIRKS_H
+ 
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+ bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
+Index: linux-3.10.26/drivers/usb/host/xhci.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci.c	2014-01-19 16:29:18.548615960 +0000
+@@ -30,6 +30,16 @@
+ 
+ #include "xhci.h"
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include "mtk-phy.h"
++#include "xhci-mtk-scheduler.h"
++#include "xhci-mtk-power.h"
++#include "xhci-mtk.h"
++#endif
++
+ #define DRIVER_AUTHOR "Sarah Sharp"
+ #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+ 
+@@ -38,6 +48,18 @@
+ module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++static struct file_operations xhci_mtk_test_fops = {
++    .owner =		THIS_MODULE,
++    .read =		xhci_mtk_test_read,
++    .write =		xhci_mtk_test_write,
++    .unlocked_ioctl =	xhci_mtk_test_unlock_ioctl,
++    .open =		xhci_mtk_test_open,
++    .release =		xhci_mtk_test_release,
++};
++#endif
++
+ /* TODO: copied from ehci-hcd.c - can this be refactored? */
+ /*
+  * xhci_handshake - spin reading hc until handshake completes or fails
+@@ -189,7 +211,7 @@
+ 	return ret;
+ }
+ 
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ static int xhci_free_msi(struct xhci_hcd *xhci)
+ {
+ 	int i;
+@@ -386,6 +408,7 @@
+ 		return ret;
+ 	}
+ 	hcd->irq = pdev->irq;
++
+ 	return 0;
+ }
+ 
+@@ -427,6 +450,11 @@
+ 			xhci_dbg(xhci, "Attempting compliance mode recovery\n");
+ 			hcd = xhci->shared_hcd;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++			temp |= (1 << 31);
++			xhci_writel(xhci, temp, xhci->usb3_ports[i]);
++#endif
++
+ 			if (hcd->state == HC_STATE_SUSPENDED)
+ 				usb_hcd_resume_root_hub(hcd);
+ 
+@@ -475,6 +503,9 @@
+ {
+ 	const char *dmi_product_name, *dmi_sys_vendor;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	return true;
++#endif
+ 	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ 	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ 	if (!dmi_product_name || !dmi_sys_vendor)
+@@ -518,6 +549,10 @@
+ 	} else {
+ 		xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
+ 	}
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	mtk_xhci_scheduler_init();
++#endif
+ 	retval = xhci_mem_init(xhci, GFP_KERNEL);
+ 	xhci_dbg(xhci, "Finished xhci_init\n");
+ 
+@@ -661,7 +696,11 @@
+ 	xhci_dbg(xhci, "// Set the interrupt modulation register\n");
+ 	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ 	temp &= ~ER_IRQ_INTERVAL_MASK;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	temp |= (u32) 16;
++#else
+ 	temp |= (u32) 160;
++#endif
+ 	xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
+ 
+ 	/* Set the HCD state before we enable the irqs */
+@@ -682,6 +721,9 @@
+ 		xhci_queue_vendor_command(xhci, 0, 0, 0,
+ 				TRB_TYPE(TRB_NEC_GET_FW));
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	enableXhciAllPortPower(xhci);
++#endif
+ 	xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
+ 	return 0;
+ }
+@@ -999,7 +1041,6 @@
+ 
+ 	/* If restore operation fails, re-initialize the HC during resume */
+ 	if ((temp & STS_SRE) || hibernated) {
+-
+ 		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ 				!(xhci_all_ports_seen_u0(xhci))) {
+ 			del_timer_sync(&xhci->comp_mode_recovery_timer);
+@@ -1583,6 +1624,13 @@
+ 	u32 drop_flag;
+ 	u32 new_add_flags, new_drop_flags, new_slot_info;
+ 	int ret;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++	struct sch_ep *sch_ep = NULL;
++	int isTT;
++	int ep_type;
++#endif
++#endif
+ 
+ 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ 	if (ret <= 0)
+@@ -1634,6 +1682,40 @@
+ 
+ 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++	slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
++	if ((slot_ctx->tt_info & 0xff) > 0) {
++		isTT = 1;
++	}
++	else {
++		isTT = 0;
++	}
++	if (usb_endpoint_xfer_int(&ep->desc)) {
++		ep_type = USB_EP_INT;
++	}
++	else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++		ep_type = USB_EP_ISOC;
++	}
++	else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++		ep_type = USB_EP_BULK;
++	}
++	else
++		ep_type = USB_EP_CONTROL;
++
++	sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
++		, isTT, ep_type, (mtk_u32 *)ep);
++	if (sch_ep != NULL) {
++		kfree(sch_ep);
++	}
++	else {
++		xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
++	}
++#else
++	mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
++#endif
++#endif
++
+ 	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ 			(unsigned int) ep->desc.bEndpointAddress,
+ 			udev->slot_id,
+@@ -1669,6 +1751,18 @@
+ 	u32 new_add_flags, new_drop_flags, new_slot_info;
+ 	struct xhci_virt_device *virt_dev;
+ 	int ret = 0;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	struct xhci_ep_ctx *in_ep_ctx;
++#if MTK_SCH_NEW
++	struct sch_ep *sch_ep;
++	int isTT;
++	int ep_type;
++	int maxp = 0;
++	int burst = 0;
++	int mult = 0;
++	int interval;
++#endif
++#endif
+ 
+ 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ 	if (ret <= 0) {
+@@ -1731,6 +1825,56 @@
+ 		return -ENOMEM;
+ 	}
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
++#if MTK_SCH_NEW
++	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
++	if ((slot_ctx->tt_info & 0xff) > 0) {
++		isTT = 1;
++	}
++	else {
++		isTT = 0;
++	}
++	if (usb_endpoint_xfer_int(&ep->desc)) {
++		ep_type = USB_EP_INT;
++	}
++	else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++		ep_type = USB_EP_ISOC;
++	}
++	else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++		ep_type = USB_EP_BULK;
++	}
++	else
++		ep_type = USB_EP_CONTROL;
++
++	if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH 
++		|| udev->speed == USB_SPEED_LOW) {
++		maxp = ep->desc.wMaxPacketSize & 0x7FF;
++		burst = ep->desc.wMaxPacketSize >> 11;
++		mult = 0;
++	}
++	else if (udev->speed == USB_SPEED_SUPER) {
++		maxp = ep->desc.wMaxPacketSize & 0x7FF;
++		burst = ep->ss_ep_comp.bMaxBurst;
++		mult = ep->ss_ep_comp.bmAttributes & 0x3;
++	}
++	interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
++	sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
++	if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
++		isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
++		, (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
++		xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++		return -ENOSPC;
++	}
++#else
++	if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
++		xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++		return -ENOSPC;
++	}
++#endif
++#endif
+ 	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ 	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+ 
+@@ -2694,7 +2838,7 @@
+ 	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+ 			ctrl_ctx->drop_flags == 0)
+ 		return 0;
+-
++	
+ 	xhci_dbg(xhci, "New Input Control Context:\n");
+ 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+@@ -4230,10 +4374,14 @@
+ 		u16 *timeout)
+ {
+ 	if (state == USB3_LPM_U1) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ 			return xhci_calculate_intel_u1_timeout(udev, desc);
+ 	} else {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ 			return xhci_calculate_intel_u2_timeout(udev, desc);
+ 	}
+ 
+@@ -4659,7 +4807,9 @@
+ 	/* Accept arbitrarily long scatter-gather lists */
+ 	hcd->self.sg_tablesize = ~0;
+ 	/* XHCI controllers don't stop the ep queue on short packets :| */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	hcd->self.no_stop_on_short = 1;
++#endif
+ 
+ 	if (usb_hcd_is_primary_hcd(hcd)) {
+ 		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+@@ -4728,6 +4878,10 @@
+ 		goto error;
+ 	xhci_dbg(xhci, "Reset complete\n");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	setInitialReg();
++#endif
++
+ 	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ 	if (HCC_64BIT_ADDR(temp)) {
+ 		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+@@ -4752,8 +4906,21 @@
+ MODULE_AUTHOR(DRIVER_AUTHOR);
+ MODULE_LICENSE("GPL");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static struct platform_device xhci_platform_dev = {
++	.name = "xhci-hcd",
++	.id   = -1,
++	.dev  = { 
++		.coherent_dma_mask = 0xffffffff,
++        },
++};
++#endif
++
+ static int __init xhci_hcd_init(void)
+ {
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	struct platform_device *pPlatformDev;
++#endif
+ 	int retval;
+ 
+ 	retval = xhci_register_pci();
+@@ -4766,6 +4933,33 @@
+ 		printk(KERN_DEBUG "Problem registering platform driver.");
+ 		goto unreg_pci;
+ 	}
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
++
++	u3phy_init();
++	if (u3phy_ops->u2_slew_rate_calibration) {
++                u3phy_ops->u2_slew_rate_calibration(u3phy);
++                u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
++        }
++        else{
++                printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++        }
++        u3phy_ops->init(u3phy);
++	reinitIP();
++
++	pPlatformDev = &xhci_platform_dev;
++	memset(pPlatformDev, 0, sizeof(struct platform_device));
++	pPlatformDev->name = "xhci-hcd";
++	pPlatformDev->id = -1;
++	pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
++	pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
++
++	retval = platform_device_register(&xhci_platform_dev);
++	if (retval < 0)
++		xhci_unregister_plat();
++#endif
++
+ 	/*
+ 	 * Check the compiler generated sizes of structures that must be laid
+ 	 * out in specific ways for hardware access.
+@@ -4783,6 +4977,7 @@
+ 	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ 	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
++
+ 	return 0;
+ unreg_pci:
+ 	xhci_unregister_pci();
+Index: linux-3.10.26/drivers/usb/host/xhci-dbg.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci-dbg.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci-dbg.c	2014-01-19 16:29:18.548615960 +0000
+@@ -21,6 +21,9 @@
+  */
+ 
+ #include "xhci.h"
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include "xhci-mtk.h"
++#endif
+ 
+ #define XHCI_INIT_VALUE 0x0
+ 
+Index: linux-3.10.26/drivers/usb/host/xhci.h
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci.h	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci.h	2014-01-19 16:29:18.548615960 +0000
+@@ -29,9 +29,24 @@
+ #include <linux/usb/hcd.h>
+ 
+ /* Code sharing between pci-quirks and xhci hcd */
+-#include	"xhci-ext-caps.h"
++#include "xhci-ext-caps.h"
+ #include "pci-quirks.h"
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define XHC_IRQ (22 + 8)
++#define XHC_IO_START 0x1E1C0000
++#define XHC_IO_LENGTH 0x10000
++/* mtk scheduler bitmasks */
++#define BPKTS(p)	((p) & 0x3f)
++#define BCSCOUNT(p)	(((p) & 0x7) << 8)
++#define BBM(p)		((p) << 11)
++#define BOFFSET(p)	((p) & 0x3fff)
++#define BREPEAT(p)	(((p) & 0x7fff) << 16)
++#endif
++
++
++
++
+ /* xHCI PCI Configuration Registers */
+ #define XHCI_SBRN_OFFSET	(0x60)
+ 
+@@ -1536,8 +1551,12 @@
+ 	/* Compliance Mode Recovery Data */
+ 	struct timer_list	comp_mode_recovery_timer;
+ 	u32			port_status_u0;
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++#define COMP_MODE_RCVRY_MSECS 5000
++#else
+ /* Compliance Mode Timer Triggered every 2 seconds */
+ #define COMP_MODE_RCVRY_MSECS 2000
++#endif
+ };
+ 
+ /* convert between an HCD pointer and the corresponding EHCI_HCD */
+@@ -1703,7 +1722,7 @@
+ void xhci_free_command(struct xhci_hcd *xhci,
+ 		struct xhci_command *command);
+ 
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* xHCI PCI glue */
+ int xhci_register_pci(void);
+ void xhci_unregister_pci(void);
+Index: linux-3.10.26/drivers/usb/host/xhci-mem.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci-mem.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci-mem.c	2014-01-19 16:29:18.548615960 +0000
+@@ -65,6 +65,9 @@
+ 
+ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+ {
++	if (!seg)
++		return;
++
+ 	if (seg->trbs) {
+ 		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ 		seg->trbs = NULL;
+@@ -1446,9 +1449,17 @@
+ 			max_burst = (usb_endpoint_maxp(&ep->desc)
+ 				     & 0x1800) >> 11;
+ 		}
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++		max_packet += 2;
++#endif
+ 		break;
+ 	case USB_SPEED_FULL:
+ 	case USB_SPEED_LOW:
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++		max_packet += 2;
++#endif
+ 		break;
+ 	default:
+ 		BUG();
+Index: linux-3.10.26/drivers/usb/host/xhci-plat.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci-plat.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci-plat.c	2014-01-19 16:29:18.548615960 +0000
+@@ -25,6 +25,13 @@
+ 	 * dev struct in order to setup MSI
+ 	 */
+ 	xhci->quirks |= XHCI_PLAT;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	/* MTK host controller gives a spurious successful event after a 
++	 * short transfer. Ignore it.
++	 */
++	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
++	xhci->quirks |= XHCI_LPM_SUPPORT;
++#endif
+ }
+ 
+ /* called during probe() after chip reset completes */
+@@ -96,20 +103,32 @@
+ 
+ 	driver = &xhci_plat_xhci_driver;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	irq = XHC_IRQ;
++#else
+ 	irq = platform_get_irq(pdev, 0);
++#endif
++
+ 	if (irq < 0)
+ 		return -ENODEV;
+ 
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!res)
+ 		return -ENODEV;
++#endif
+ 
+ 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ 	if (!hcd)
+ 		return -ENOMEM;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	hcd->rsrc_start = (uint32_t)XHC_IO_START;
++	hcd->rsrc_len = XHC_IO_LENGTH;
++#else
+ 	hcd->rsrc_start = res->start;
+ 	hcd->rsrc_len = resource_size(res);
++#endif
+ 
+ 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ 				driver->description)) {
+Index: linux-3.10.26/drivers/usb/host/xhci-ring.c
+===================================================================
+--- linux-3.10.26.orig/drivers/usb/host/xhci-ring.c	2014-01-09 20:25:15.000000000 +0000
++++ linux-3.10.26/drivers/usb/host/xhci-ring.c	2014-01-19 16:29:18.548615960 +0000
+@@ -236,7 +236,6 @@
+ 			 */
+ 			if (!chain && !more_trbs_coming)
+ 				break;
+-
+ 			/* If we're not dealing with 0.95 hardware or
+ 			 * isoc rings on AMD 0.96 host,
+ 			 * carry over the chain bit of the previous TRB
+@@ -273,16 +272,20 @@
+ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ 		unsigned int num_trbs)
+ {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	int num_trbs_in_deq_seg;
++#endif
+ 
+ 	if (ring->num_trbs_free < num_trbs)
+ 		return 0;
+ 
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+ 		num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+ 		if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+ 			return 0;
+ 	}
++#endif
+ 
+ 	return 1;
+ }
+@@ -2910,6 +2913,7 @@
+ 		next = ring->enqueue;
+ 
+ 		while (last_trb(xhci, ring, ring->enq_seg, next)) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 			/* If we're not dealing with 0.95 hardware or isoc rings
+ 			 * on AMD 0.96 host, clear the chain bit.
+ 			 */
+@@ -2919,7 +2923,9 @@
+ 				next->link.control &= cpu_to_le32(~TRB_CHAIN);
+ 			else
+ 				next->link.control |= cpu_to_le32(TRB_CHAIN);
+-
++#else
++			next->link.control &= cpu_to_le32(~TRB_CHAIN);
++#endif
+ 			wmb();
+ 			next->link.control ^= cpu_to_le32(TRB_CYCLE);
+ 
+@@ -3049,6 +3055,9 @@
+ 		start_trb->field[3] |= cpu_to_le32(start_cycle);
+ 	else
+ 		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	wmb();
++#endif
+ 	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+ }
+ 
+@@ -3108,6 +3117,29 @@
+ 		return (remainder >> 10) << 17;
+ }
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
++{
++	u32 max = 31;
++	int remainder, td_packet_count, packet_transferred;
++	
++	//0 for the last TRB
++	//FIXME: need to workaround if there is ZLP in this TD
++	if (td_running_total + trb_buffer_length == td_transfer_size)
++		return 0;
++	
++	//FIXME: need to take care of high-bandwidth (MAX_ESIT)
++	packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
++	td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
++	remainder = td_packet_count - packet_transferred;
++		
++	if (remainder > max)
++		return max << 17;
++	else
++		return remainder << 17;
++}
++#endif
++
+ /*
+  * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+  * packets remaining in the TD (*not* including this TRB).
+@@ -3245,6 +3277,7 @@
+ 		}
+ 
+ 		/* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->hci_version < 0x100) {
+ 			remainder = xhci_td_remainder(
+ 					urb->transfer_buffer_length -
+@@ -3254,6 +3287,13 @@
+ 					trb_buff_len, total_packet_count, urb,
+ 					num_trbs - 1);
+ 		}
++#else
++		if (num_trbs > 1)
++			remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, 
++				running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
++#endif
++
++	
+ 		length_field = TRB_LEN(trb_buff_len) |
+ 			remainder |
+ 			TRB_INTR_TARGET(0);
+@@ -3316,6 +3356,9 @@
+ 	int running_total, trb_buff_len, ret;
+ 	unsigned int total_packet_count;
+ 	u64 addr;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	int max_packet;
++#endif
+ 
+ 	if (urb->num_sgs)
+ 		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+@@ -3341,6 +3384,25 @@
+ 		running_total += TRB_MAX_BUFF_SIZE;
+ 	}
+ 	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	switch(urb->dev->speed){
++		case USB_SPEED_SUPER:
++			max_packet = urb->ep->desc.wMaxPacketSize;
++			break;
++		case USB_SPEED_HIGH:
++		case USB_SPEED_FULL:
++		case USB_SPEED_LOW:
++		case USB_SPEED_WIRELESS:
++		case USB_SPEED_UNKNOWN:
++		default:
++			max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++			break;
++	}
++	if((urb->transfer_flags & URB_ZERO_PACKET) 
++		&& ((urb->transfer_buffer_length % max_packet) == 0)){
++		num_trbs++;
++	}
++#endif
+ 
+ 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+ 			ep_index, urb->stream_id,
+@@ -3400,6 +3462,7 @@
+ 			field |= TRB_ISP;
+ 
+ 		/* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->hci_version < 0x100) {
+ 			remainder = xhci_td_remainder(
+ 					urb->transfer_buffer_length -
+@@ -3409,6 +3472,10 @@
+ 					trb_buff_len, total_packet_count, urb,
+ 					num_trbs - 1);
+ 		}
++#else
++		remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ 		length_field = TRB_LEN(trb_buff_len) |
+ 			remainder |
+ 			TRB_INTR_TARGET(0);
+@@ -3498,7 +3565,11 @@
+ 		field |= 0x1;
+ 
+ 	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	if (1) {
++#else
+ 	if (xhci->hci_version == 0x100) {
++#endif
+ 		if (urb->transfer_buffer_length > 0) {
+ 			if (setup->bRequestType & USB_DIR_IN)
+ 				field |= TRB_TX_TYPE(TRB_DATA_IN);
+@@ -3522,7 +3593,12 @@
+ 		field = TRB_TYPE(TRB_DATA);
+ 
+ 	length_field = TRB_LEN(urb->transfer_buffer_length) |
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		xhci_td_remainder(urb->transfer_buffer_length) |
++#else
++		//CC: MTK style, no scatter-gather for control transfer
++		0 |
++#endif
+ 		TRB_INTR_TARGET(0);
+ 	if (urb->transfer_buffer_length > 0) {
+ 		if (setup->bRequestType & USB_DIR_IN)
+@@ -3533,7 +3609,7 @@
+ 				length_field,
+ 				field | ep_ring->cycle_state);
+ 	}
+-
++	
+ 	/* Save the DMA address of the last TRB in the TD */
+ 	td->last_trb = ep_ring->enqueue;
+ 
+@@ -3645,6 +3721,9 @@
+ 	u64 start_addr, addr;
+ 	int i, j;
+ 	bool more_trbs_coming;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	int max_packet;
++#endif
+ 
+ 	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+ 
+@@ -3658,6 +3737,21 @@
+ 	start_trb = &ep_ring->enqueue->generic;
+ 	start_cycle = ep_ring->cycle_state;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	switch(urb->dev->speed){
++		case USB_SPEED_SUPER:
++			max_packet = urb->ep->desc.wMaxPacketSize;
++			break;
++		case USB_SPEED_HIGH:
++		case USB_SPEED_FULL:
++		case USB_SPEED_LOW:
++		case USB_SPEED_WIRELESS:
++		case USB_SPEED_UNKNOWN:
++			max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++			break;
++	}
++#endif
++
+ 	urb_priv = urb->hcpriv;
+ 	/* Queue the first TRB, even if it's zero-length */
+ 	for (i = 0; i < num_tds; i++) {
+@@ -3729,9 +3823,13 @@
+ 			} else {
+ 				td->last_trb = ep_ring->enqueue;
+ 				field |= TRB_IOC;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++				if (!(xhci->quirks & XHCI_AVOID_BEI)) {
++#else
+ 				if (xhci->hci_version == 0x100 &&
+ 						!(xhci->quirks &
+ 							XHCI_AVOID_BEI)) {
++#endif
+ 					/* Set BEI bit except for the last td */
+ 					if (i < num_tds - 1)
+ 						field |= TRB_BEI;
+@@ -3746,6 +3844,7 @@
+ 				trb_buff_len = td_remain_len;
+ 
+ 			/* Set the TRB length, TD size, & interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 			if (xhci->hci_version < 0x100) {
+ 				remainder = xhci_td_remainder(
+ 						td_len - running_total);
+@@ -3755,6 +3854,10 @@
+ 						total_packet_count, urb,
+ 						(trbs_per_td - j - 1));
+ 			}
++#else
++			remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ 			length_field = TRB_LEN(trb_buff_len) |
+ 				remainder |
+ 				TRB_INTR_TARGET(0);