ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

ipq40xx: refactor ZTE MF287 series

Browse Source 
The ZTE MF287 requires a different board calibration file for ath10k than
the ZTE MF287+. The two devices receive their own DTS, thus the device tree
is slightly refactored.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
(cherry picked from commit 9c7578d560)
This commit is contained in:
Andreas Böhler 2023-09-16 21:55:01 +02:00 committed by Hauke Mehrtens
parent 2f30dec3cb
commit a684b512e5
8 changed files with 260 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
package/firmware/ipq-wifi/Makefile
View File

@ -41,6 +41,7 @@ ALLWIFIBOARDS:= \
xiaomi_ax3600 \
xiaomi_ax9000 \
zte_mf289f \
zte_mf287 \
zte_mf287plus \
zyxel_nbg7815
@ -129,6 +130,7 @@ $(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))

1
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -108,6 +108,7 @@ ipq40xx_setup_interfaces()
zte,mf286d)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
;;
zte,mf287|\
zte,mf287plus|\
zte,mf287pro)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"

1
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -27,6 +27,7 @@ EOF
;;
zte,mf18a |\
zte,mf286d |\
zte,mf287|\
zte,mf287plus |\
zte,mf287pro |\
zte,mf289f)

226
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dts Normal file
View File

@ -0,0 +1,226 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4018-mf287_common.dtsi"
/ {
model = "ZTE MF287";
compatible = "zte,mf287";
/*
* This node is used to restart modem module to avoid anomalous
* behaviours on initial communication.
*/
gpio-restart {
compatible = "gpio-restart";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
};
&key_reset {
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
};
&key_wps {
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
&led_status {
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>,
<&tlmm 1 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0xc0000>;
read-only;
};
partition@1b0000 {
label = "0:reserved1";
reg = <0x1b0000 0x50000>;
read-only;
};
};
};
spi-nand@1 { /* flash@1 ? */
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fota-flag";
reg = <0x0 0x140000>;
read-only;
};
partition@140000 {
label = "ART";
reg = <0x140000 0x140000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@280000 {
label = "mac";
reg = <0x280000 0x140000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mac_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
partition@3c0000 {
label = "cfg-param";
reg = <0x3c0000 0x600000>;
read-only;
};
partition@9c0000 {
label = "oops";
reg = <0x9c0000 0x140000>;
};
partition@b00000 {
label = "web";
reg = <0xb00000 0x800000>;
};
partition@1300000 {
label = "rootfs";
reg = <0x1300000 0x2200000>;
};
partition@3500000 {
label = "data";
reg = <0x3500000 0x1900000>;
};
partition@4e00000 {
label = "fota";
reg = <0x4e00000 0x3200000>;
};
};
};
zigbee@2 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "silabs,em3581";
reg = <2>;
spi-max-frequency = <12000000>;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio54", "gpio59", "gpio1";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&wifi0 {
qcom,ath10k-calibration-variant = "zte,mf287";
};
&wifi1{
qcom,ath10k-calibration-variant = "zte,mf287";
};

2
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dtsi → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi
View File

@ -171,7 +171,6 @@
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};
&wifi1 {
@ -179,5 +178,4 @@
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
mac-address-increment = <1>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};

10
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts
View File

@ -3,7 +3,7 @@
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4018-mf287.dtsi"
#include "qcom-ipq4018-mf287_common.dtsi"
/ {
model = "ZTE MF287Plus";
@ -216,3 +216,11 @@
};
};
};
&wifi0 {
qcom,ath10k-calibration-variant = "zte,mf287plus";
};
&wifi1{
qcom,ath10k-calibration-variant = "zte,mf287plus";
};

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts
View File

@ -3,7 +3,7 @@
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4018-mf287.dtsi"
#include "qcom-ipq4018-mf287_common.dtsi"
/ {
model = "ZTE MF287Pro";
@ -263,3 +263,13 @@
};
};
};
/* The MF287Plus and MF287Pro share the same board data file */
&wifi0 {
qcom,ath10k-calibration-variant = "zte,mf287plus";
};
/* The MF287Plus and MF287Pro share the same board data file */
&wifi1{
qcom,ath10k-calibration-variant = "zte,mf287plus";
};

13
target/linux/ipq40xx/image/generic.mk
View File

@ -1164,7 +1164,6 @@ TARGET_DEVICES += zte_mf286d
define Device/zte_mf287_common
$(call Device/zte_mf28x_common)
DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
SOC := qcom-ipq4018
# The recovery image is used to return back to stock (an initramfs-based image
# that can be flashed to the device via sysupgrade
@ -1177,15 +1176,23 @@ endef
define Device/zte_mf287plus
$(call Device/zte_mf287_common)
DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_MODEL := MF287Plus
DEVICE_ALT0_VENDOR := ZTE
DEVICE_ALT0_MODEL := MF287
endef
TARGET_DEVICES += zte_mf287plus
define Device/zte_mf287
$(call Device/zte_mf287_common)
DEVICE_PACKAGES += ipq-wifi-zte_mf287
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_MODEL := MF287
endef
TARGET_DEVICES += zte_mf287
define Device/zte_mf287pro
$(call Device/zte_mf287_common)
DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
DEVICE_MODEL := MF287Pro
endef